NIS-3500-2208PCE

File: NIS-3500-2208PCE.mib (145356 bytes)

Imported modules

SNMPv2-SMI

Imported symbols

internet IpAddress Integer32

Defined Types

DisplayString  
Tok_String
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..255)  

MacAddress  
OCTET STRING Size(6)    

PortList  
OCTET STRING    

IPconfigurationEntry  
SEQUENCE    
  ipConfigurationIndex Integer32
  ipConfigurationDHCPStatus INTEGER
  ipConfigurationAddress IpAddress
  ipConfigurationSubMask IpAddress
  ipConfigurationGateway IpAddress
  ipConfigurationDNS1 IpAddress
  ipConfigurationDNS2 IpAddress

DHCPServerCfgEntry  
SEQUENCE    
  dhcpServerCfgIndex Integer32
  dhcpServerCfgStatus INTEGER
  dhcpServerCfgLowIPAddr IpAddress
  dhcpServerCfgHighIPAddr IpAddress
  dhcpServerCfgSubMask IpAddress
  dhcpServerCfgGateway IpAddress
  dhcpServerCfgDNS IpAddress
  dhcpServerCfgLeaseTime Integer32

DHCPServerClientInfoEntry  
SEQUENCE    
  dhcpServerClientInfoIndex Integer32
  dhcpServerClientInfoIPAddr DisplayString
  dhcpServerClientInfoID DisplayString
  dhcpServerClientInfoType DisplayString
  dhcpServerClientInfoStatus DisplayString
  dhcpServerClientInfoLease Integer32

DHCPServerIPBindingEntry  
SEQUENCE    
  dhcpServerIPBindingPortNum Integer32
  dhcpServerIPBindingAddr IpAddress

PortCtrlEntry  
SEQUENCE    
  portCtrlIndex Integer32
  portCtrlPortName DisplayString
  portCtrlPortStatus INTEGER
  portCtrlNegotiation INTEGER
  portCtrlSpeed INTEGER
  portCtrlDuplex INTEGER
  portCtrlFlowControl INTEGER
  portCtrlSecurity INTEGER

RateLimitingEntry  
SEQUENCE    
  rateLimitingPortNum Integer32
  rateLimitingPortType INTEGER
  rateLimitingIngressRate Integer32
  rateLimitingEgressRate Integer32

PortTrunkAggregatorEntry  
SEQUENCE    
  portTrunkAggregatorIndex Integer32
  portTrunkAggregatorGroupName DisplayString
  portTrunkAggregatorMemberPorts PortList
  portTrunkAggregatorLACPStatus INTEGER
  portTrunkAggregatorWorkPorts Integer32

PortTrunkAggregatorInfoEntry  
SEQUENCE    
  portTrunkAggregatorInfoIndex Integer32
  portTrunkAggregatorInfoGroupName DisplayString
  portTrunkAggregatorInfoDescription DisplayString

PortTrunkLACPStateActEntry  
SEQUENCE    
  portTrunkLACPStateActPortNum Integer32
  portTrunkLACPStateActStatus INTEGER

RstpPerPortCfgEntry  
SEQUENCE    
  rstpPerPortCfgPortNum Integer32
  rstpPerPortCfgPathCost Integer32
  rstpPerPortCfgPriority Integer32
  rstpPerPortCfgAdminP2P INTEGER
  rstpPerPortCfgAdminEdge INTEGER
  rstpPerPortCfgAdminNonStp INTEGER

RstpRootBridgeInformationEntry  
SEQUENCE    
  rstpRootBridgeInformationIndex Integer32
  rstpRootBridgeInformationBridgeID DisplayString
  rstpRootBridgeInformationRootPriority Integer32
  rstpRootBridgeInformationRootPort DisplayString
  rstpRootBridgeInformationRootPathCost Integer32
  rstpRootBridgeInformationMaxAge Integer32
  rstpRootBridgeInformationHelloTime Integer32
  rstpRootBridgeInformationForwardDelay Integer32

RstpPerPortInfoEntry  
SEQUENCE    
  rstpPerPortInfoPortNum Integer32
  rstpPerPortInfoPathCost Integer32
  rstpPerPortInfoPriority Integer32
  rstpPerPortInfoAdminP2P INTEGER
  rstpPerPortInfoAdminEdge INTEGER
  rstpPerPortInfoStpNeighbor INTEGER
  rstpPerPortInfoState INTEGER
  rstpPerPortInfoRole INTEGER

VlanIEEE8021QEntry  
SEQUENCE    
  vlanIEEE8021QIndex Integer32
  vlanIEEE8021QPortName DisplayString
  vlanIEEE8021QLinkType INTEGER
  vlanIEEE8021QUntaggedVid Integer32
  vlanIEEE8021QTaggedVids DisplayString

VlanIEEE8021QGroupEntry  
SEQUENCE    
  vlanIEEE8021QGroupVid Integer32
  vlanIEEE8021QGroupName DisplayString
  vlanIEEE8021QGroupStatus INTEGER

VlanPortBasedEntry  
SEQUENCE    
  vlanPortBasedIndex Integer32
  vlanPortBasedGroupName DisplayString
  vlanPortBasedVid Integer32
  vlanPortBasedMembers PortList
  vlanPortBasedStatus INTEGER

SnmpCommunityStringEntry  
SEQUENCE    
  snmpCommunityStringIndex Integer32
  snmpCommunityStringName DisplayString
  snmpCommunityStringAttribute INTEGER
  snmpCommunityStringStatus INTEGER

SnmpTrapServerEntry  
SEQUENCE    
  snmpTrapServerIndex Integer32
  snmpTrapServerIPAddr IpAddress
  snmpTrapServerTrapComm DisplayString
  snmpTrapServerTrapVer INTEGER
  snmpTrapServerStatus INTEGER

QosPortBasedPriorityEntry  
SEQUENCE    
  qosPortBasedPriorityPortNum Integer32
  qosPortBasedPriority INTEGER

QosCOSEntry  
SEQUENCE    
  qosCOSPriority Integer32
  qosCOS INTEGER

QosCOSPortDefaultEntry  
SEQUENCE    
  qosCOSPort Integer32
  qosCOSPortDefault Integer32

QosTOSEntry  
SEQUENCE    
  qosTOSPriority Integer32
  qosTOS INTEGER

IgmpEntriesEntry  
SEQUENCE    
  igmpEntriesEntryIndex Integer32
  igmpEntriesEntryIPAddr IpAddress
  igmpEntriesEntryVID Integer32
  igmpEntriesEntryMembers PortList

MulticastfilteringEntriesEntry  
SEQUENCE    
  multicastFilteringIndex Integer32
  multicastFilteringAddr IpAddress
  multicastFilteringMemberports PortList
  multicastFilteringStatus INTEGER

PortSecurityEntry  
SEQUENCE    
  portSecurityIndex Integer32
  portSecurityPortName DisplayString
  portSecurityAddr MacAddress
  portSecurityStatus INTEGER

MACBlacklistEntry  
SEQUENCE    
  macBlacklistIndex Integer32
  macBlacklistAddr MacAddress
  macBlacklistStatus INTEGER

RadiusPerPortCfgEntry  
SEQUENCE    
  radiusPerPortCfgIndex Integer32
  radiusPerPortCfgPortName DisplayString
  radiusPerPortCfgState INTEGER

FaultAlarmPortCfgEntry  
SEQUENCE    
  faultAlarmPortCfgNum Integer32
  faultAlarmPortLinkStatus INTEGER

SystemEventsEntry  
SEQUENCE    
  eventSystemEventsIndex Integer32
  eventDeviceRestartEvent INTEGER
  eventPowerStatusEvent INTEGER
  eventAuthenticationFailureEvent INTEGER
  eventRingTopologyChangeEvent INTEGER

PortEventsEntry  
SEQUENCE    
  eventPortNumber Integer32
  eventPortEventLog INTEGER
  eventPortEventSMTP INTEGER

EmailAlertRcptEntry  
SEQUENCE    
  eventEmailAlertRcptIndex Integer32
  eventEmailAlertRcptEmailAddr DisplayString

MACAddrEntry  
SEQUENCE    
  macAddressAddr MacAddress
  macAddressPortName DisplayString
  macAddressType INTEGER

SwitchPortStatEntry  
SEQUENCE    
  swPortStatIndex Integer32
  swPortStatType DisplayString
  swPortStatLink INTEGER
  swPortStatState INTEGER
  swPortStatTXGoodPkt Integer32
  swPortStatTXBadPkt Integer32
  swPortStatRXGoodPkt Integer32
  swPortStatRXBadPkt Integer32
  swPortStatTXAbortPkt Integer32
  swPortStatPacketCollision Integer32

SwitchPortMirrorSourceEntry  
SEQUENCE    
  swPortMirrorPortNum Integer32
  swPortMirrorSourcePort INTEGER

EventLogEntry  
SEQUENCE    
  eventLogIndex Integer32
  eventLogDescription DisplayString

SwitchCurrentPortNameListEntry  
SEQUENCE    
  swCurrentPortNameListIndex Integer32
  swCurrentPortNameListPortName DisplayString
  swCurrentPortNameListPortNumber DisplayString

PoePortStatusEntry  
SEQUENCE    
  poePortStatusIndex Integer32
  poePortStatusLink INTEGER
  poePortStatusState INTEGER
  poePortStatusCurrent Integer32
  poePortStatusVoltage DisplayString
  poePortStatusPower Integer32
  poePortStatusDeterminedClass DisplayString

PoePortControlEntry  
SEQUENCE    
  poePortControlIndex Integer32
  poePortControlState INTEGER
  poePortControlPowerLimitFromClassification INTEGER
  poePortControlLegacy INTEGER
  poePortControlPriority INTEGER
  poePortControlPowerLimit Integer32

Defined Values

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

company 1.3.6.1.4.1.25972
OBJECT IDENTIFIER    

switches 1.3.6.1.4.1.25972.0
OBJECT IDENTIFIER    

managedPoeSwitch 1.3.6.1.4.1.25972.0.5
OBJECT IDENTIFIER    

nis-3500-2208pce 1.3.6.1.4.1.25972.0.5.20
OBJECT IDENTIFIER    

contact 1.3.6.1.4.1.25972.0.5.20.0
The MIB module is for Industrial Ethernet Switch and compatible to firmware kernel version 2.46 or higher.
MODULE-IDENTITY    

systemInfo 1.3.6.1.4.1.25972.0.5.20.1
OBJECT IDENTIFIER    

basicSetting 1.3.6.1.4.1.25972.0.5.20.2
OBJECT IDENTIFIER    

dhcpServer 1.3.6.1.4.1.25972.0.5.20.3
OBJECT IDENTIFIER    

portSetting 1.3.6.1.4.1.25972.0.5.20.4
OBJECT IDENTIFIER    

redundancy 1.3.6.1.4.1.25972.0.5.20.5
OBJECT IDENTIFIER    

vlan 1.3.6.1.4.1.25972.0.5.20.6
OBJECT IDENTIFIER    

snmp 1.3.6.1.4.1.25972.0.5.20.7
OBJECT IDENTIFIER    

trafficPrioritization 1.3.6.1.4.1.25972.0.5.20.8
OBJECT IDENTIFIER    

multicast 1.3.6.1.4.1.25972.0.5.20.9
OBJECT IDENTIFIER    

security 1.3.6.1.4.1.25972.0.5.20.10
OBJECT IDENTIFIER    

warning 1.3.6.1.4.1.25972.0.5.20.11
OBJECT IDENTIFIER    

monitorAndDiag 1.3.6.1.4.1.25972.0.5.20.12
OBJECT IDENTIFIER    

saveConfiguration 1.3.6.1.4.1.25972.0.5.20.13
OBJECT IDENTIFIER    

factoryDefault 1.3.6.1.4.1.25972.0.5.20.14
OBJECT IDENTIFIER    

systemReboot 1.3.6.1.4.1.25972.0.5.20.15
OBJECT IDENTIFIER    

misc 1.3.6.1.4.1.25972.0.5.20.24
OBJECT IDENTIFIER    

powerOverEthernet 1.3.6.1.4.1.25972.0.5.20.25
OBJECT IDENTIFIER    

systemName 1.3.6.1.4.1.25972.0.5.20.1.1
An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

systemLocation 1.3.6.1.4.1.25972.0.5.20.1.2
The physical location of this node (e.g., `telephone closet, 3rd floor').
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

systemContact 1.3.6.1.4.1.25972.0.5.20.1.3
The contact information of system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

systemDescr 1.3.6.1.4.1.25972.0.5.20.1.4
A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

systemFwVer 1.3.6.1.4.1.25972.0.5.20.1.5
Firmware version of the device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

systemMacAddress 1.3.6.1.4.1.25972.0.5.20.1.6
The MAC address of switch.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

switchSetting 1.3.6.1.4.1.25972.0.5.20.2.1
OBJECT IDENTIFIER    

adminPassword 1.3.6.1.4.1.25972.0.5.20.2.2
OBJECT IDENTIFIER    

ipConfiguration 1.3.6.1.4.1.25972.0.5.20.2.3
OBJECT IDENTIFIER    

sntp 1.3.6.1.4.1.25972.0.5.20.2.4
OBJECT IDENTIFIER    

lldp 1.3.6.1.4.1.25972.0.5.20.2.5
OBJECT IDENTIFIER    

autoProvision 1.3.6.1.4.1.25972.0.5.20.2.6
OBJECT IDENTIFIER    

backupAndRestore 1.3.6.1.4.1.25972.0.5.20.2.7
OBJECT IDENTIFIER    

upgradeFirmware 1.3.6.1.4.1.25972.0.5.20.2.8
OBJECT IDENTIFIER    

switchSettingSystemName 1.3.6.1.4.1.25972.0.5.20.2.1.1
An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

switchSettingSystemLocation 1.3.6.1.4.1.25972.0.5.20.2.1.2
The physical location of this node (e.g., `telephone closet, 3rd floor').
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

switchSettingSystemContact 1.3.6.1.4.1.25972.0.5.20.2.1.3
The contact information of system.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

switchSettingLocationAlert 1.3.6.1.4.1.25972.0.5.20.2.1.4
The location alert function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

adminPasswordUserName 1.3.6.1.4.1.25972.0.5.20.2.2.1
The name(ID) of security manager.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

adminPassword-Password 1.3.6.1.4.1.25972.0.5.20.2.2.2
The password of security manager. This object can't be read. it's write-only.
Status: current Access: write-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

ipConfigurationTable 1.3.6.1.4.1.25972.0.5.20.2.3.1
Table of descriptive information and configuration about IP of switche.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IPconfigurationEntry

ipConfigurationEntry 1.3.6.1.4.1.25972.0.5.20.2.3.1.1
An entry in the table, containing IP/DHCP-client information of the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  IPconfigurationEntry  

ipConfigurationIndex 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.1
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

ipConfigurationDHCPStatus 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.2
Parameter to enable or disable DHCP client function of the switch. When enabled, device will be a DHCP client and request the IP configuration from DHCP server. Note: Other items in this table couldn't be modified, when ipConfigurationDHCPStatus is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipConfigurationAddress 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.3
The IP address of switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipConfigurationSubMask 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.4
The subnet mask of switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipConfigurationGateway 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.5
The gateway address of switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipConfigurationDNS1 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.6
The DNS1 address of switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipConfigurationDNS2 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.7
The DNS2 address of switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sntpClientStatus 1.3.6.1.4.1.25972.0.5.20.2.4.1
(1)Enable SNTP clinet. (2)Disable SNTP clinet. SNTP is simple network time protocol. Use this OID to Enable/Disable SNTP client.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

sntpDaylightSavingTime 1.3.6.1.4.1.25972.0.5.20.2.4.2
(1)Enable Daylight Saving Time. (2)Disable Daylight Saving Time. Daylight Saving Time: Use this OID to Enable/Disable Daylight Saving Time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

sntpUTCTimezone 1.3.6.1.4.1.25972.0.5.20.2.4.3
UTC Timezone.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER gmt-negative-12-00-Eniwetok-Kwajalein(1), gmt-negative-11-00-Midway-Island-Samoa(2), gmt-negative-10-00-Hawaii(3), gmt-negative-09-00-Alaska(4), gmt-negative-08-00-Pacific-Time-US-and-Canada-Tijuana(5), gmt-negative-07-00-Arizona(6), gmt-negative-07-00-Mountain-Time-US-and-Canada(7), gmt-negative-06-00-Central-Time-US-and-Canada(8), gmt-negative-06-00-Mexico-City-Tegucigalpa(9), gmt-negative-06-00-Saskatchewan(10), gmt-negative-05-00-Bogota-Lima-Quito(11), gmt-negative-05-00-Eastern-Time-US-and-Canada(12), gmt-negative-05-00-Indiana-East(13), gmt-negative-04-00-Atlantic-Time-Canada(14), gmt-negative-04-00-Caracas-La-Paz(15), gmt-negative-04-00-Santiago(16), gmt-negative-03-30-Newfoundland(17), gmt-negative-03-00-Brasilia(18), gmt-negative-03-00-Buenos-Aires-Georgetown(19), gmt-negative-02-00-Mid-Atlantic(20), gmt-negative-01-00-Azores-Cape-Verde-Is(21), gmt-Casablanca-Monrovia(22), gmt-Greenwich-Mean-Time-Dublin-Edinburgh-Lisbon-London(23), gmt-positive-01-00-Amsterdam-Berlin-Bern-Rome-Stockholm-Vienna(24), gmt-positive-01-00-Belgrade-Bratislava-Budapest-Ljubljana-Prague(25), gmt-positive-01-00-Brussels-Copenhagen-Madrid-Paris-Vilnius(26), gmt-positive-01-00-Sarajevo-Skopje-Sofija-Warsaw-Zagreb(27), gmt-positive-02-00-Athens-Istanbul-Minsk(28), gmt-positive-02-00-Bucharest(29), gmt-positive-02-00-Cairo(30), gmt-positive-02-00-Harare-Pretoria(31), gmt-positive-02-00-Helsinki-Riga-Tallinn(32), gmt-positive-02-00-Jerusalem(33), gmt-positive-03-00-Baghdad-Kuwait-Riyadh(34), gmt-positive-03-00-Moscow-St-Petersburg-Volgograd(35), gmt-positive-03-00-Mairobi(36), gmt-positive-03-30-Tehran(37), gmt-positive-04-00-Abu-Dhabi-Muscat(38), gmt-positive-04-00-Baku-Tbilisi(39), gmt-positive-04-30-Kabul(40), gmt-positive-05-00-Ekaterinburg(41), gmt-positive-05-00-Islamabad-Karachi-Tashkent(42), gmt-positive-05-30-Bombay-Calcutta-Madras-New-Delhi(43), gmt-positive-06-00-Astana-Almaty-Dhaka(44), gmt-positive-06-00-Colombo(45), gmt-positive-07-00-Bangkok-Hanoi-Jakarta(46), gmt-positive-08-00-Beijing-Chongqing-Hong-Kong-Urumqi(47), gmt-positive-08-00-Perth(48), gmt-positive-08-00-Singapore(49), gmt-positive-08-00-Taipei(50), gmt-positive-09-00-Osaka-Sapporo-Tokyo(51), gmt-positive-09-00-Seoul(52), gmt-positive-09-00-Yakutsk(53), gmt-positive-09-30-Adelaide(54), gmt-positive-09-30-Darwin(55), gmt-positive-10-00-Brisbane(56), gmt-positive-10-00-Canberra-Melbourne-Sydney(57), gmt-positive-10-00-Guam-Port-Moresby(58), gmt-positive-10-00-Hobart(59), gmt-positive-10-00-Vladivostok(60), gmt-positive-11-00-Magadan-Solomon-Is-New-Caledonia(61), gmt-positive-12-00-Auckland-Wllington(62), gmt-positive-12-00-Fiji-Kamchatka-Marshall-Is(63)  

sntpServerAddress 1.3.6.1.4.1.25972.0.5.20.2.4.4
The address of a SNTP Server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..100)  

sntpSwitchTimer 1.3.6.1.4.1.25972.0.5.20.2.4.5
The switch timer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

sntpDaylightSavingPeriodStart 1.3.6.1.4.1.25972.0.5.20.2.4.6
The start-time of daylight saveing period, format: yyyymmdd hh:mm.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..14)  

sntpDaylightSavingPeriodEnd 1.3.6.1.4.1.25972.0.5.20.2.4.7
The end-time of daylight saveing period, format: yyyymmdd hh:mm.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..14)  

sntpDaylightSavingOffset 1.3.6.1.4.1.25972.0.5.20.2.4.8
Daylight Saving Offset(Usually is 60 mins). When Enable and current time at Daylight Saving Period, the current time of the switch will be offseted by Daylight Saving Offset.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

lldpStatus 1.3.6.1.4.1.25972.0.5.20.2.5.1
LLDP Configuration. (1) Enable. (2) Disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

lldpInterval 1.3.6.1.4.1.25972.0.5.20.2.5.2
LLDP Interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

autoProvisionConfigurationStatus 1.3.6.1.4.1.25972.0.5.20.2.6.1
Auto Provision for Switch Configuration. (1) Enable. (2) Disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autoProvisionConfigurationServerip 1.3.6.1.4.1.25972.0.5.20.2.6.2
The IP address of TFTP server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

autoProvisionConfigurationFilename 1.3.6.1.4.1.25972.0.5.20.2.6.3
The filename of firmware.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..14)  

autoProvisionImageStatus 1.3.6.1.4.1.25972.0.5.20.2.6.4
Auto Provision for firmware image. (1) Enable. (2) Disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autoProvisionImageServerip 1.3.6.1.4.1.25972.0.5.20.2.6.5
The IP address of TFTP server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

autoProvisionImageFilename 1.3.6.1.4.1.25972.0.5.20.2.6.6
The filename of firmware.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..14)  

backupServerIP 1.3.6.1.4.1.25972.0.5.20.2.7.1
The IP address of a TFTP server from which a firmware image can be uploaded.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

backupAgentBoardFwFileName 1.3.6.1.4.1.25972.0.5.20.2.7.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..80)  

backupStatus 1.3.6.1.4.1.25972.0.5.20.2.7.3
Setting this object to active(1) triger the TFTP upload action. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notActive(2)  

restoreServerIP 1.3.6.1.4.1.25972.0.5.20.2.7.4
The IP address of a TFTP server from which a firmware image can be downloaded.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

restoreAgentBoardFwFileName 1.3.6.1.4.1.25972.0.5.20.2.7.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..80)  

restoreStatus 1.3.6.1.4.1.25972.0.5.20.2.7.6
Setting this object to active(1) triger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notActive(2)  

tftpDownloadServerIP 1.3.6.1.4.1.25972.0.5.20.2.8.1
The IP address of a TFTP server from which a firmware image can be downloaded.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tftpDownloadAgentBoardFwFileName 1.3.6.1.4.1.25972.0.5.20.2.8.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..80)  

tftpDownloadStatus 1.3.6.1.4.1.25972.0.5.20.2.8.3
Setting this object to active(1) triger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notActive(2)  

dhcpServerCfgTable 1.3.6.1.4.1.25972.0.5.20.3.1
Table of descriptive information and configuration about DHCP server of the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DHCPServerCfgEntry

dhcpServerCfgEntry 1.3.6.1.4.1.25972.0.5.20.3.1.1
An entry in the table, containing DHCP server information of the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  DHCPServerCfgEntry  

dhcpServerCfgIndex 1.3.6.1.4.1.25972.0.5.20.3.1.1.1
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

dhcpServerCfgStatus 1.3.6.1.4.1.25972.0.5.20.3.1.1.2
Parameter to enable or disable DHCP server function of the switch. When enabled, the device will be a DHCP server and provide the IP configurations for other DHCP clients. Note: Other items in this table couldn't be modified, when dhcpServerCfgStatus is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dhcpServerCfgLowIPAddr 1.3.6.1.4.1.25972.0.5.20.3.1.1.3
This object defines the low boundary of DHCP server IP pool.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpServerCfgHighIPAddr 1.3.6.1.4.1.25972.0.5.20.3.1.1.4
This object defines the high boundary of DHCP server IP pool.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpServerCfgSubMask 1.3.6.1.4.1.25972.0.5.20.3.1.1.5
The subnet mask of IP configuration for DHCP clients.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpServerCfgGateway 1.3.6.1.4.1.25972.0.5.20.3.1.1.6
The gateway address of IP configuration for DHCP clients.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpServerCfgDNS 1.3.6.1.4.1.25972.0.5.20.3.1.1.7
The DNS address of IP configuration for DHCP clients.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpServerCfgLeaseTime 1.3.6.1.4.1.25972.0.5.20.3.1.1.8
The lease time(in second) of DHCP clients.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dhcpServerClientInfoTable 1.3.6.1.4.1.25972.0.5.20.3.2
Table of descriptive information about current status of each DHCP client registered.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DHCPServerClientInfoEntry

dhcpServerClientInfoEntry 1.3.6.1.4.1.25972.0.5.20.3.2.1
An entry in the table, containing DHCP clients information.
Status: current Access: not-accessible
OBJECT-TYPE    
  DHCPServerClientInfoEntry  

dhcpServerClientInfoIndex 1.3.6.1.4.1.25972.0.5.20.3.2.1.1
Index of DHCP client.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dhcpServerClientInfoIPAddr 1.3.6.1.4.1.25972.0.5.20.3.2.1.2
The IP address of client.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

dhcpServerClientInfoID 1.3.6.1.4.1.25972.0.5.20.3.2.1.3
The ID(MAC address) of client.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..17)  

dhcpServerClientInfoType 1.3.6.1.4.1.25972.0.5.20.3.2.1.4
The type of client. bootptab: Entry comes from bootptab file. dynamic: Entry is dynamiclly created w/defaults for dhcp offer. sniffed: Entry is learned by snooping on net traffic. dbase: Entry is manually entered by user.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

dhcpServerClientInfoStatus 1.3.6.1.4.1.25972.0.5.20.3.2.1.5
The status of client. Unassigned: none of the following. BOOTP: Entry has been assigned via plain bootp. DHCPOffer: Entry has a dhcp offer pending. DHCP: Entry has been assigned via DHCP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

dhcpServerClientInfoLease 1.3.6.1.4.1.25972.0.5.20.3.2.1.6
The lease time of client(in second).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dhcpServerIPBindingTable 1.3.6.1.4.1.25972.0.5.20.3.3
Table of descriptive information and configuration about IP binding of DHCP server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DHCPServerIPBindingEntry

dhcpServerIPBindingEntry 1.3.6.1.4.1.25972.0.5.20.3.3.1
An entry in the table, containing IP binding information of DHCP server.
Status: current Access: not-accessible
OBJECT-TYPE    
  DHCPServerIPBindingEntry  

dhcpServerIPBindingPortNum 1.3.6.1.4.1.25972.0.5.20.3.3.1.1
The port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dhcpServerIPBindingAddr 1.3.6.1.4.1.25972.0.5.20.3.3.1.2
The IP binding address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

portControl 1.3.6.1.4.1.25972.0.5.20.4.1
OBJECT IDENTIFIER    

rateLimiting 1.3.6.1.4.1.25972.0.5.20.4.2
OBJECT IDENTIFIER    

portTrunk 1.3.6.1.4.1.25972.0.5.20.4.3
OBJECT IDENTIFIER    

portCtrlTable 1.3.6.1.4.1.25972.0.5.20.4.1.1
Table of status information and configuration about each switch ports(including expansion slot).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortCtrlEntry

portCtrlEntry 1.3.6.1.4.1.25972.0.5.20.4.1.1.1
An entry in the table, containing information about configuration in one switch port of the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortCtrlEntry  

portCtrlIndex 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.1
Index of port management table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

portCtrlPortName 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.2
The name of port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..7)  

portCtrlPortStatus 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.3
To disable (or enable) control of this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

portCtrlNegotiation 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.4
The mode of network negoticaion, (1)Automatic (2)Force
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), force(2)  

portCtrlSpeed 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.5
Set the speed of the port. If portCtrlNegotiation is auto, this object can't be modified.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER speed-10M(1), speed-100M(2), speed-1000M(3)  

portCtrlDuplex 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.6
Set full-duplex or half-duplex mode of the port. If portCtrlNegotiation is auto, this object can't be modified.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fullduplex(1), halfduplex(2)  

portCtrlFlowControl 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.7
Set flow control.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), symmetric(2), asymmetric(3)  

portCtrlSecurity 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.8
Set port security.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rateLimitingTable 1.3.6.1.4.1.25972.0.5.20.4.2.1
Table of descriptive information and configuration about port rate limiting in this system. You can set up every port 3/4s bandwidth rate and packet limitation type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RateLimitingEntry

rateLimitingEntry 1.3.6.1.4.1.25972.0.5.20.4.2.1.1
An entry in the table, containing information about port rate limiting.
Status: current Access: not-accessible
OBJECT-TYPE    
  RateLimitingEntry  

rateLimitingPortNum 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.1
Port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rateLimitingPortType 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.2
Limit Packet type: select the packet type that want to filter. The packet types have all type packet, broadcast/multicast/ unknown unicast packet, broadcast/multicast packet, and broadcast packet only. The broadcast/multicast/unknown unicast packet, broadcast/multicast packet, and broadcast packet only are only for ingress packet. The egress rate only supports all type packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(1), broadcast-multicast-floodedunicast(2), broadcast-multicast(3), broadcastonly(4)  

rateLimitingIngressRate 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.3
Ingress rate, the rate range is from 64 kbps to 102400 kbps (or 250000 kbps for giga ports), and zero means no limit.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rateLimitingEgressRate 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.4
Egress rate, the rate range is from 64 kbps to 102400 kbps (or 250000 kbps for giga ports), and zero means no limit.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

aggregatorSetting 1.3.6.1.4.1.25972.0.5.20.4.3.1
OBJECT IDENTIFIER    

aggregatorStatus 1.3.6.1.4.1.25972.0.5.20.4.3.2
OBJECT IDENTIFIER    

stateActivity 1.3.6.1.4.1.25972.0.5.20.4.3.3
OBJECT IDENTIFIER    

portTrunkSysPri 1.3.6.1.4.1.25972.0.5.20.4.3.1.1
The system priority of trunking.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portTrunkAggregatorTable 1.3.6.1.4.1.25972.0.5.20.4.3.1.2
Table of descriptive information and configuration about of each trunk group in this system. Link aggregation lets you group up to switch-port-num consecutive ports into a single dedicated connection. This feature can expand bandwidth to a device on the network, such as another switch or a server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortTrunkAggregatorEntry

portTrunkAggregatorEntry 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1
An entry in the table, containing information about aggregator setting of the trunk.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortTrunkAggregatorEntry  

portTrunkAggregatorIndex 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.1
Index of trunk aggregator table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portTrunkAggregatorGroupName 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.2
The name of trunk group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

portTrunkAggregatorMemberPorts 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.3
The members of trunk group.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

portTrunkAggregatorInfoTable 1.3.6.1.4.1.25972.0.5.20.4.3.2.1
Table of descriptive information about trunk group in this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortTrunkAggregatorInfoEntry

portTrunkAggregatorInfoEntry 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1
An entry in the table, containing information about the trunk group.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortTrunkAggregatorInfoEntry  

portTrunkAggregatorInfoIndex 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.1
Index of trunk information table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portTrunkAggregatorInfoGroupName 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.2
The name of trunk group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

portTrunkAggregatorInfoDescription 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.3
The dscription of trunk group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

portTrunkAggregatorLACPStatus 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.4
The LACP function of trunking. (1) LACP is enabled for the group. (2) LACP is disabled for the group.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

portTrunkAggregatorWorkPorts 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.5
The works ports of trunked group, the number of work ports should be equal to the count of members in static trunking(ie. LACP is disabled), and should not greater than the count of members in static/ dynamic trunking.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portTrunkLACPStateActTable 1.3.6.1.4.1.25972.0.5.20.4.3.3.1
Table of descriptive information and configuration about of each trunk group in this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortTrunkLACPStateActEntry

portTrunkLACPStateActEntry 1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1
An entry in the table, containing information about LACP state activity of the trunk.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortTrunkLACPStateActEntry  

portTrunkLACPStateActPortNum 1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1.1
Port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portTrunkLACPStateActStatus 1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1.2
The LACP state activity of the port. (1) Active. (2) Passive. (3) LACP doesn't be enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), passtive(2), disabled(3)  

redundantRing 1.3.6.1.4.1.25972.0.5.20.5.1
OBJECT IDENTIFIER    

rstp 1.3.6.1.4.1.25972.0.5.20.5.3
OBJECT IDENTIFIER    

redundantRingStatus 1.3.6.1.4.1.25972.0.5.20.5.1.1
redundantRing function status. (1) redundantRing function is enabled. (2) redundantRing function is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

redundantRingMasterStatus 1.3.6.1.4.1.25972.0.5.20.5.1.2
Ring Master function status. (1) Ring Master function is enabled. (2) Ring Master function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

redundantRingPort1 1.3.6.1.4.1.25972.0.5.20.5.1.3
Port Id(1~8) will be working port. The system will automatically decide which port is working port and which port is backup port if the redundantRingStatus object is set to enabled(1).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

redundantRingPort2 1.3.6.1.4.1.25972.0.5.20.5.1.4
Port Id(1~8) will be working port. The system will automatically decide which port is working port and which port is backup port if the redundantRingStatus object is set to enabled(1).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

redundantRingCoupleRingStatus 1.3.6.1.4.1.25972.0.5.20.5.1.5
Couple Ring function status. (1) Couple Ring function is enabled. (2) Couple Ring function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

redundantRingCouplingPort 1.3.6.1.4.1.25972.0.5.20.5.1.6
Coupling Port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

redundantRingDualHomingStatus 1.3.6.1.4.1.25972.0.5.20.5.1.7
Couple Ring function status. (1) Dual Homing function is enabled. (2) Dual Homing function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

redundantRingHomingPort 1.3.6.1.4.1.25972.0.5.20.5.1.8
Homing Port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

redundantRingMasterHStatus 1.3.6.1.4.1.25972.0.5.20.5.1.9
Ring Master function hardware status. (1) Ring Master function is enabled. (2) Ring Master function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rstpStatus 1.3.6.1.4.1.25972.0.5.20.5.3.1
Enable/Disable rapid spanning tree protocol for system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enalbed(1), disabled(2)  

rstpPriority 1.3.6.1.4.1.25972.0.5.20.5.3.2
A value used to identify the root bridge. The bridge with the lowest value has the highest priority and is selected as the root. Enter a number 0 through 61440 in steps of 4096. If you change the value, you must restart RSTP. This item can't be modified, if rstpStatus was disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rstpMaxAge 1.3.6.1.4.1.25972.0.5.20.5.3.3
The number of seconds a bridge waits without receiving Spanning-Tree Protocol configuration messages before attempting a reconfiguration. Enter a number 6 through 40. Note: 2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). This item can't be modified, if rstpStatus was disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rstpHelloTime 1.3.6.1.4.1.25972.0.5.20.5.3.4
The number of seconds between the transmission of Spanning-Tree Protocol configuration messages. Enter a number 1 through 10 Note: 2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). This item can't be modified, if rstpStatus was disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rstpForwardDelayTime 1.3.6.1.4.1.25972.0.5.20.5.3.5
The number of seconds a port waits before changing from its Spanning-Tree Protocol learning and listening states to the forwarding state. Enter a number 4 through 30. Note:2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). This item can't be modified, if rstpStatus was disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rstpPerPortCfgTable 1.3.6.1.4.1.25972.0.5.20.5.3.6
Table of descriptive information and configuration about rapid spanning tree (Per port).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RstpPerPortCfgEntry

rstpPerPortCfgEntry 1.3.6.1.4.1.25972.0.5.20.5.3.6.1
An entry in the table, containing configuration about RSTP (Per port).
Status: current Access: not-accessible
OBJECT-TYPE    
  RstpPerPortCfgEntry  

rstpPerPortCfgPortNum 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.1
Port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rstpPerPortCfgPathCost 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.2
The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rstpPerPortCfgPriority 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.3
Decide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rstpPerPortCfgAdminP2P 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.4
Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or can be connected to two or more Bridges(i.e., it is served by a shared medium LAN segment). The adminPointToPointMAC allow the p2p status of the link to be manipulated adminitratively.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2), auto(3)  

rstpPerPortCfgAdminEdge 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.5
Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping the listening and learning stages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

rstpPerPortCfgAdminNonStp 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.6
If true, this port will not participate in RSTP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

rstpRootBridgeInformationTable 1.3.6.1.4.1.25972.0.5.20.5.3.7
Table of descriptive information about root bridge of rapid spanning tree in this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RstpRootBridgeInformationEntry

rstpRootBridgeInformationEntry 1.3.6.1.4.1.25972.0.5.20.5.3.7.1
An entry in the table, containing information about root bridge information of the RSTP.
Status: current Access: not-accessible
OBJECT-TYPE    
  RstpRootBridgeInformationEntry  

rstpRootBridgeInformationIndex 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.1
Index of root bridge information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

rstpRootBridgeInformationBridgeID 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.2
Bridge ID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

rstpRootBridgeInformationRootPriority 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.3
Root Priority.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rstpRootBridgeInformationRootPort 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.4
Root Port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rstpRootBridgeInformationRootPathCost 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.5
Root Path Cost.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rstpRootBridgeInformationMaxAge 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.6
Max Age.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rstpRootBridgeInformationHelloTime 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.7
Hello Time.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rstpRootBridgeInformationForwardDelay 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.8
Forward Delay Time.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rstpPerPortInfoTable 1.3.6.1.4.1.25972.0.5.20.5.3.8
Table of descriptive information and configuration about rapid spanning tree (Per port).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RstpPerPortInfoEntry

rstpPerPortInfoEntry 1.3.6.1.4.1.25972.0.5.20.5.3.8.1
An entry in the table, containing inforamtion about RSTP (Per port).
Status: current Access: not-accessible
OBJECT-TYPE    
  RstpPerPortInfoEntry  

rstpPerPortInfoPortNum 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.1
Port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rstpPerPortInfoPathCost 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.2
The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rstpPerPortInfoPriority 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.3
Decide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rstpPerPortInfoAdminP2P 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.4
Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or can be connected to two or more Bridges(i.e., it is served by a shared medium LAN segment). The adminPointToPointMAC allow the p2p status of the link to be manipulated adminitratively.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), true(2), false(3)  

rstpPerPortInfoAdminEdge 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.5
Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping the listening and learning stages.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

rstpPerPortInfoStpNeighbor 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.6
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

rstpPerPortInfoState 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.7
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonStp(1), learning(2), forwarding(3), disabled(4), discarding(5), unknown(6)  

rstpPerPortInfoRole 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.8
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), root(2), designated(3), alternated(4), backup(5), nonStp(6), unknown(7)  

vlanOperationMode 1.3.6.1.4.1.25972.0.5.20.6.1
The operation mode of vlan. (1)IEEE802.1Q VLAN, (2)Portbased VLAN, (3)VLAN is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ieee8021q(1), portbased(2), disabled(3)  

vlanGVRP 1.3.6.1.4.1.25972.0.5.20.6.2
Enable GVRP Protocol. The item has no meaning, if the operation mode of vlan isn't IEEE802.1Q.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vlanIEEE8021QTable 1.3.6.1.4.1.25972.0.5.20.6.3
Table of descriptive information and configuration about IEEE802.1Q group in this system. Tag-based VLANs are based on IEEE 802.1Q specifications. Traffic is forwarded to VLAN member ports based on identifying VLAN tags in data packets. You can also configure the switch to interoperate with existing tag-based VLAN networks and legacy non-tag networks.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanIEEE8021QEntry

vlanIEEE8021QEntry 1.3.6.1.4.1.25972.0.5.20.6.3.1
An entry in the table, containing information and configuration of IEEE802.1Q vlan.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanIEEE8021QEntry  

vlanIEEE8021QIndex 1.3.6.1.4.1.25972.0.5.20.6.3.1.1
Index of IEEE802.1Q table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vlanIEEE8021QPortName 1.3.6.1.4.1.25972.0.5.20.6.3.1.2
The name of port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

vlanIEEE8021QLinkType 1.3.6.1.4.1.25972.0.5.20.6.3.1.3
The type of port: (1)Access Link (2)Trunk Link (3)Hybrid Link
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER accesslink(1), trunklink(2), hybridlink(3)  

vlanIEEE8021QUntaggedVid 1.3.6.1.4.1.25972.0.5.20.6.3.1.4
The untagged vid of port. This item can't be modified, if link type is trunklink.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

vlanIEEE8021QTaggedVids 1.3.6.1.4.1.25972.0.5.20.6.3.1.5
The tagged vids of port. It's a descriptive statement of a list of tagged vids. Note: Every tagged vid is separated by a comma and no space-key be allowed. This item can't be modified, if link type is accesslink.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

vlanIEEE8021QGroupTable 1.3.6.1.4.1.25972.0.5.20.6.4
Table of descriptive information and configuration of each ieee802.1q group in this system. Tag-based VLANs are based on IEEE 802.1Q specifications. Traffic is forwarded to VLAN member ports based on identifying VLAN tags in data packets. You can also configure the switch to interoperate with existing tag-based VLAN networks and legacy non-tag networks.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanIEEE8021QGroupEntry

vlanIEEE8021QGroupEntry 1.3.6.1.4.1.25972.0.5.20.6.4.1
An entry in the table, containing information about group name of the IEEE802.1Q vlan.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanIEEE8021QGroupEntry  

vlanIEEE8021QGroupVid 1.3.6.1.4.1.25972.0.5.20.6.4.1.1
Vlan ID.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vlanIEEE8021QGroupName 1.3.6.1.4.1.25972.0.5.20.6.4.1.2
The group name of vlan.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

vlanIEEE8021QGroupStatus 1.3.6.1.4.1.25972.0.5.20.6.4.1.3
The status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

vlanPortBasedTable 1.3.6.1.4.1.25972.0.5.20.6.5
Table of descriptive information and configuration about of each port based vlan group in this system. Traffic is forwarded to the member ports of the same vlan group. By adding ports to the VLAN you have created one port-based vlan group completely
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanPortBasedEntry

vlanPortBasedEntry 1.3.6.1.4.1.25972.0.5.20.6.5.1
An entry in the table, containing information about port based vlan.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanPortBasedEntry  

vlanPortBasedIndex 1.3.6.1.4.1.25972.0.5.20.6.5.1.1
Index of port-based vlan table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vlanPortBasedGroupName 1.3.6.1.4.1.25972.0.5.20.6.5.1.2
The group name of vlan.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

vlanPortBasedVid 1.3.6.1.4.1.25972.0.5.20.6.5.1.3
The vid of vlan. Vid should be the value between 1 to 4094.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

vlanPortBasedMembers 1.3.6.1.4.1.25972.0.5.20.6.5.1.4
The member mask of vlan. Note: If there were a trunking group, all of trunking members should be in the same vlan group. If some members of trunking group doesn't be included in vlan group, the SNMP agent reports error.
Status: current Access: read-create
OBJECT-TYPE    
  PortList  

vlanPortBasedStatus 1.3.6.1.4.1.25972.0.5.20.6.5.1.5
The status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER valid(1), creatrequest(2), undercreation(3), invalid(4)  

snmpAgentMode 1.3.6.1.4.1.25972.0.5.20.7.1
The Agent mode of snmp agent. (1) SNMPV1/V2C Only. (2) SNMPV3. (3) SNMPV1/V2C/V3
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER v1-v2Conly(1), v3(2)  

snmpSystemName 1.3.6.1.4.1.25972.0.5.20.7.2
The system name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

snmpSystemLocation 1.3.6.1.4.1.25972.0.5.20.7.3
The system location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

snmpSystemContact 1.3.6.1.4.1.25972.0.5.20.7.4
The contact information of system.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

snmpCommunityStringTable 1.3.6.1.4.1.25972.0.5.20.7.5
Table of descriptive and information about community string of SNMP agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpCommunityStringEntry

snmpCommunityStringEntry 1.3.6.1.4.1.25972.0.5.20.7.5.1
An entry in the table, containing inforamtion about community string of SNMP agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpCommunityStringEntry  

snmpCommunityStringIndex 1.3.6.1.4.1.25972.0.5.20.7.5.1.1
Index of community string.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

snmpCommunityStringName 1.3.6.1.4.1.25972.0.5.20.7.5.1.2
The community string of SNMP agent.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

snmpCommunityStringAttribute 1.3.6.1.4.1.25972.0.5.20.7.5.1.3
The attribute of community string.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ro(1), rw(2)  

snmpCommunityStringStatus 1.3.6.1.4.1.25972.0.5.20.7.5.1.4
The status of this entry. If this object is not equal to valid(1), all associated snmp entries shall be deleted by the agent.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER valid(1), creatrequest(2), undercreation(3), invalid(4)  

snmpTrapServerTable 1.3.6.1.4.1.25972.0.5.20.7.6
Table of descriptive and information about trap server of SNMP agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpTrapServerEntry

snmpTrapServerEntry 1.3.6.1.4.1.25972.0.5.20.7.6.1
An entry in the table, containing inforamtion about trap server of SNMP agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpTrapServerEntry  

snmpTrapServerIndex 1.3.6.1.4.1.25972.0.5.20.7.6.1.1
Index of trap server.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

snmpTrapServerIPAddr 1.3.6.1.4.1.25972.0.5.20.7.6.1.2
Trap Server IP Address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

snmpTrapServerTrapComm 1.3.6.1.4.1.25972.0.5.20.7.6.1.3
The community string of trap server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

snmpTrapServerTrapVer 1.3.6.1.4.1.25972.0.5.20.7.6.1.4
The trap version.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER v1(1), v2c(2)  

snmpTrapServerStatus 1.3.6.1.4.1.25972.0.5.20.7.6.1.5
The status of this entry. If this object is not equal to valid(1), all associated snmp entries shall be deleted by the agent.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER valid(1), creatrequest(2), undercreation(3), invalid(4)  

qosPolicy 1.3.6.1.4.1.25972.0.5.20.8.1
(1)Using the 8, 4, 2, 1 weight fair queue scheme. (2)Use the strict priority scheme. Using the 8, 4, 2, 1 weight fair queue scheme: the switch will follow 8:4:2:1 rate to process priority queue from Hi to lowest queue. For example: the system will process 8 high queue packets, 4 middle queue packets, 2 low queue packets, and the one lowest queue packets at the same time. Use the strict priority scheme: Always higher queue will be process first, except higher queue is empty.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER an-8-4-2-1-weighted-fair-queuing-scheme(1), a-strict-priority-scheme(2)  

qosPriorityType 1.3.6.1.4.1.25972.0.5.20.8.2
(1)Port Base (2)COS only (3)TOS only (4)COS first (5)TOS first (6)Disabled Port-base: the port priority will follow the default port priority that you have assigned - High, middle, low, or lowest. COS only: the port priority will only follow the COS priority that you have assigned. TOS only: the port priority will only follow the TOS priority that you have assigned. COS first: the port priority will follow the COS priority first, and then other priority rule. TOS first: the port priority will follow the TOS priority first, and the other priority rule.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER port-base(1), cos-only(2), tos-only(3), cos-first(4), tos-first(5), disabled(6)  

qosPortBasedPriorityTable 1.3.6.1.4.1.25972.0.5.20.8.3
Table of descriptive information and configuration about PortBased QOS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QosPortBasedPriorityEntry

qosPortBasedPriorityEntry 1.3.6.1.4.1.25972.0.5.20.8.3.1
An entry in the table, containing inforamtion about PortBased QOS.
Status: current Access: not-accessible
OBJECT-TYPE    
  QosPortBasedPriorityEntry  

qosPortBasedPriorityPortNum 1.3.6.1.4.1.25972.0.5.20.8.3.1.1
Port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

qosPortBasedPriority 1.3.6.1.4.1.25972.0.5.20.8.3.1.2
The port priority will follow the default port priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER lowest(1), low(2), middle(3), high(4)  

qosCOSTable 1.3.6.1.4.1.25972.0.5.20.8.4
Table of descriptive information and configuration about PortBased QOS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QosCOSEntry

qosCOSEntry 1.3.6.1.4.1.25972.0.5.20.8.4.1
An entry in the table, containing inforamtion about COS QOS.
Status: current Access: not-accessible
OBJECT-TYPE    
  QosCOSEntry  

qosCOSPriority 1.3.6.1.4.1.25972.0.5.20.8.4.1.1
COS priority.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

qosCOS 1.3.6.1.4.1.25972.0.5.20.8.4.1.2
The port priority will follow the COS priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER lowest(1), low(2), middle(3), high(4)  

qosCOSPortDefaultTable 1.3.6.1.4.1.25972.0.5.20.8.5
Table of descriptive information and configuration about PortBased QOS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QosCOSPortDefaultEntry

qosCOSPortDefaultEntry 1.3.6.1.4.1.25972.0.5.20.8.5.1
An entry in the table, containing inforamtion about COS QOS.
Status: current Access: not-accessible
OBJECT-TYPE    
  QosCOSPortDefaultEntry  

qosCOSPort 1.3.6.1.4.1.25972.0.5.20.8.5.1.1
COS Default Panel Port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

qosCOSPortDefault 1.3.6.1.4.1.25972.0.5.20.8.5.1.2
COS Default Panel Port Priority.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

qosTOSTable 1.3.6.1.4.1.25972.0.5.20.8.6
Table of descriptive information and configuration about PortBased QOS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QosTOSEntry

qosTOSEntry 1.3.6.1.4.1.25972.0.5.20.8.6.1
An entry in the table, containing inforamtion about TOS QOS.
Status: current Access: not-accessible
OBJECT-TYPE    
  QosTOSEntry  

qosTOSPriority 1.3.6.1.4.1.25972.0.5.20.8.6.1.1
TOS priority.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

qosTOS 1.3.6.1.4.1.25972.0.5.20.8.6.1.2
The port priority will follow the TOS priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER lowest(1), low(2), middle(3), high(4)  

igmp 1.3.6.1.4.1.25972.0.5.20.9.1
OBJECT IDENTIFIER    

multicastfiltering 1.3.6.1.4.1.25972.0.5.20.9.3
OBJECT IDENTIFIER    

igmpStatus 1.3.6.1.4.1.25972.0.5.20.9.1.1
Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. The Internet Group Management Protocol (IGMP) is an internal protocol of the Internet Protocol (IP) suite. IP manages multicast traffic by using switches, routers, and hosts that support IGMP. Enabling IGMP allows the ports to detect IGMP queries and report packets and manage IP multicast traffic through the switch. IGMP have three fundamental types of message as follows: Message Description -------------------------------------------------------------- Query A message sent from the querier (IGMP router or switch) asking for a response from each host belonging to the multicast group. Report A message sent by a host to the querier to indicate that the host wants to be or is a member of a given group indicated in the report message. Leave Group A message sent by a host to the querier to indicate that the host has quit to be a member of a specific multicast group. You can enable IGMP protocol and IGMP Query function. You will see the IGMP snooping information in this section -- difference multicast group VID and member port, and IP multicast addresses range from 224.0.0.0 through 239.255.255.255.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER igmpv2(1), igmpv3(2), disabled(3)  

igmpQuery 1.3.6.1.4.1.25972.0.5.20.9.1.2
(1)Detect querier automatically. (2)Force to be a querier. (3)Be a silence snooper. The mode of querier.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), enabled(2), disabled(3)  

igmpEntriesTable 1.3.6.1.4.1.25972.0.5.20.9.1.3
Table of descriptive information about IGMP entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpEntriesEntry

igmpEntriesEntry 1.3.6.1.4.1.25972.0.5.20.9.1.3.1
An entry in the table, containing inforamtion about IGMP.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpEntriesEntry  

igmpEntriesEntryIndex 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.1
Index of IGMP table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpEntriesEntryIPAddr 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.2
The IP address of an IGMP entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

igmpEntriesEntryVID 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.3
The VLAN ID of an IGMP entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpEntriesEntryMembers 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.4
The member ports mask of IGMP entry.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

multicastfilteringEntriesTable 1.3.6.1.4.1.25972.0.5.20.9.3.1
Table of descriptive information about multicast filtering entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MulticastfilteringEntriesEntry

multicastfilteringEntriesEntry 1.3.6.1.4.1.25972.0.5.20.9.3.1.1
An entry in the table, containing inforamtion about multicast filtering entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  MulticastfilteringEntriesEntry  

multicastFilteringIndex 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.1
This object identifies the switch within the system for which this entry contains information.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

multicastFilteringAddr 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.2
Group IP Address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

multicastFilteringMemberports 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.3
The member mask of group.
Status: current Access: read-create
OBJECT-TYPE    
  PortList  

multicastFilteringStatus 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.4
The status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER valid(1), creatrequest(2), undercreation(3), invalid(4)  

ipSecurityMgt 1.3.6.1.4.1.25972.0.5.20.10.1
OBJECT IDENTIFIER    

portSecurityMgt 1.3.6.1.4.1.25972.0.5.20.10.2
OBJECT IDENTIFIER    

macBlacklist 1.3.6.1.4.1.25972.0.5.20.10.3
OBJECT IDENTIFIER    

ieee8021x 1.3.6.1.4.1.25972.0.5.20.10.4
OBJECT IDENTIFIER    

ipSecurityStatus 1.3.6.1.4.1.25972.0.5.20.10.1.1
IP Security function status. (1) IP Security function is enabled. (2) IP Security function is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipSecurityHTTPServerStatus 1.3.6.1.4.1.25972.0.5.20.10.1.2
IP Security function status. (1) IP Security of HTTP server function is enabled. (2) IP Security of HTTP server function is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipSecurityTelnetServerStatus 1.3.6.1.4.1.25972.0.5.20.10.1.3
IP Security function status. (1) IP Security of telnet server function is enabled. (2) IP Security of telnet server function is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipSecuritySNMPServerStatus 1.3.6.1.4.1.25972.0.5.20.10.1.4
IP Security function status. (1) IP Security of SNMP server function is enabled. (2) IP Security of SNMP server function is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipSecuritySecurityIP1 1.3.6.1.4.1.25972.0.5.20.10.1.5
This IP address can access and manage the switch through the Web browser.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipSecuritySecurityIP2 1.3.6.1.4.1.25972.0.5.20.10.1.6
This IP address can access and manage the switch through the Web browser.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipSecuritySecurityIP3 1.3.6.1.4.1.25972.0.5.20.10.1.7
This IP address can access and manage the switch through the Web browser.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipSecuritySecurityIP4 1.3.6.1.4.1.25972.0.5.20.10.1.8
This IP address can access and manage the switch through the Web browser.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipSecuritySecurityIP5 1.3.6.1.4.1.25972.0.5.20.10.1.9
This IP address can access and manage the switch through the Web browser.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipSecuritySecurityIP6 1.3.6.1.4.1.25972.0.5.20.10.1.10
This IP address can access and manage the switch through the Web browser.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipSecuritySecurityIP7 1.3.6.1.4.1.25972.0.5.20.10.1.11
This IP address can access and manage the switch through the Web browser.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipSecuritySecurityIP8 1.3.6.1.4.1.25972.0.5.20.10.1.12
This IP address can access and manage the switch through the Web browser.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipSecuritySecurityIP9 1.3.6.1.4.1.25972.0.5.20.10.1.13
This IP address can access and manage the switch through the Web browser.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipSecuritySecurityIP10 1.3.6.1.4.1.25972.0.5.20.10.1.14
This IP address can access and manage the switch through the Web browser.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

portSecurityTable 1.3.6.1.4.1.25972.0.5.20.10.2.1
Table of descriptive information about static MAC per port configuration. When you add a static MAC address, it remains in the switch's address table, regardless of whether the device is physically connected to the switch. This saves the switch from having to re-learn a device's MAC address when the disconnected or powered-off device is active on the network again.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortSecurityEntry

portSecurityEntry 1.3.6.1.4.1.25972.0.5.20.10.2.1.1
An entry in the table, containing inforamtion about static MAC per port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortSecurityEntry  

portSecurityIndex 1.3.6.1.4.1.25972.0.5.20.10.2.1.1.1
Index of MAC.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

portSecurityPortName 1.3.6.1.4.1.25972.0.5.20.10.2.1.1.2
The port name, if you want to insert a new MAC entry, the port name must be correct (Please refer to the switchCurrentPortNameListTable) when creating a new entry.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..7)  

portSecurityAddr 1.3.6.1.4.1.25972.0.5.20.10.2.1.1.3
MAC address of the entry.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

portSecurityStatus 1.3.6.1.4.1.25972.0.5.20.10.2.1.1.4
The status of this entry. If this object is not equal to valid(1), all associated MAC entries shall be deleted by the agent.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER valid(1), creatrequest(2), undercreation(3), invalid(4)  

macBlacklistTable 1.3.6.1.4.1.25972.0.5.20.10.3.1
Table of descriptive information about MAC filter configuration. MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the destination addresses. For example, if your network is congested because of high utilization from one MAC address, you can filter all traffic transmitted to that MAC address, restoring network flow while you troubleshoot the problem.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MACBlacklistEntry

macBlacklistEntry 1.3.6.1.4.1.25972.0.5.20.10.3.1.1
An entry in the table, containing inforamtion about MAC filter configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  MACBlacklistEntry  

macBlacklistIndex 1.3.6.1.4.1.25972.0.5.20.10.3.1.1.1
Index of MAC.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

macBlacklistAddr 1.3.6.1.4.1.25972.0.5.20.10.3.1.1.2
MAC address of the entry.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

macBlacklistStatus 1.3.6.1.4.1.25972.0.5.20.10.3.1.1.3
The status of this entry. If this object is not equal to valid(1), all associated MAC entries shall be deleted by the agent.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER valid(1), creatrequest(2), undercreation(3), invalid(4)  

radiusServerSetting 1.3.6.1.4.1.25972.0.5.20.10.4.1
OBJECT IDENTIFIER    

portAuthConfiguration 1.3.6.1.4.1.25972.0.5.20.10.4.2
OBJECT IDENTIFIER    

radius8021xProtocolStatus 1.3.6.1.4.1.25972.0.5.20.10.4.1.1
IEEE802.1x protocol function status. (1) IEEE802.1x protocol function is enabled. (2) IEEE802.1x protocol function is disabled. 802.1x makes use of the physical access characteristics of IEEE802 LAN infrastructures in order to provide a means of authenticating and authorizing devices attached to a LAN port that has point-to-point connection characteristics, and of preventing access to that port in cases in which the authentication and authorization process fails.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

radiusServerIP 1.3.6.1.4.1.25972.0.5.20.10.4.1.2
Radius Server IP Address: the ip address of the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

radiusServerPort 1.3.6.1.4.1.25972.0.5.20.10.4.1.3
Server Port: The UDP port number used by the authentication server to authenticate.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

radiusAccountingPort 1.3.6.1.4.1.25972.0.5.20.10.4.1.4
Accounting Port: The UDP port number used by the authentication server to retrieve accounting information.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

radiusSharedKey 1.3.6.1.4.1.25972.0.5.20.10.4.1.5
Shared Key: A key shared between this switch and authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

radiusNASIdentifier 1.3.6.1.4.1.25972.0.5.20.10.4.1.6
NAS Identifier: A string used to identify this switch.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

radiusMiscQuietPeriod 1.3.6.1.4.1.25972.0.5.20.10.4.1.7
Quiet Period: used to define periods of time during which it will not attempt to acquire a supplicant (Default time is 60 seconds).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

radiusMiscTxPeriod 1.3.6.1.4.1.25972.0.5.20.10.4.1.8
Tx Period: used to determine when an EAPOL PDU is to be transmitted(Default value is 30 seconds).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

radiusMiscSupplicantTimeout 1.3.6.1.4.1.25972.0.5.20.10.4.1.9
Supplicant Timeout: used to determine timeout conditions in the exchanges between the supplicant and authentication server(Default value is 30 seconds).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

radiusMiscServerTimeout 1.3.6.1.4.1.25972.0.5.20.10.4.1.10
Server Timeout: used to determine timeout conditions in the exchanges between the authenticator and authentication server(Default value is 30 seconds).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

radiusMiscReAuthMax 1.3.6.1.4.1.25972.0.5.20.10.4.1.11
ReAuthMax: used to determine the number of reauthentication attempts that are permitted before the specific port becomes unauthorized (Default value is 2 times).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

radiusMiscReauthPeriod 1.3.6.1.4.1.25972.0.5.20.10.4.1.12
Reauth Period: used to determine a nonzero number of seconds between periodic reauthentication of the supplications(Default value is 3600 seconds).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

radiusPerPortCfgTable 1.3.6.1.4.1.25972.0.5.20.10.4.2.1
Table of descriptive information and configuration about Radius per port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RadiusPerPortCfgEntry

radiusPerPortCfgEntry 1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1
An entry in the table, containing inforamtion about Radius per port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadiusPerPortCfgEntry  

radiusPerPortCfgIndex 1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1.1
Index of port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

radiusPerPortCfgPortName 1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1.2
The name of port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

radiusPerPortCfgState 1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1.3
You can select the specific port and configure the authorization state. Each port can select four kinds of authorization state : Reject: force the specific port to be unauthorized. Accept: force the specific port to be authorized. Authorize: the state of the specific port was determinied by the outcome of the authentication. Disable: the specific port didn't support 802.1x function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reject(1), accept(2), authorize(3), disabled(4)  

faultAlarm 1.3.6.1.4.1.25972.0.5.20.11.1
OBJECT IDENTIFIER    

sysLogConfiguration 1.3.6.1.4.1.25972.0.5.20.11.2
OBJECT IDENTIFIER    

smtpConfiguration 1.3.6.1.4.1.25972.0.5.20.11.3
OBJECT IDENTIFIER    

eventSelection 1.3.6.1.4.1.25972.0.5.20.11.4
OBJECT IDENTIFIER    

faultAlarmPwr1 1.3.6.1.4.1.25972.0.5.20.11.1.1
State of Power1 failure alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

faultAlarmPwr2 1.3.6.1.4.1.25972.0.5.20.11.1.2
State of Power1 failure alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

faultAlarmPortCfgTable 1.3.6.1.4.1.25972.0.5.20.11.1.3
Table of descriptive information and configuration about fault alarm per port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FaultAlarmPortCfgEntry

faultAlarmPortCfgEntry 1.3.6.1.4.1.25972.0.5.20.11.1.3.1
An entry in the table, containing inforamtion about falut alarm per port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  FaultAlarmPortCfgEntry  

faultAlarmPortCfgNum 1.3.6.1.4.1.25972.0.5.20.11.1.3.1.1
Index of port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

faultAlarmPortLinkStatus 1.3.6.1.4.1.25972.0.5.20.11.1.3.1.2
State of Port Link Down/Broken failure alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

systemEventsTable 1.3.6.1.4.1.25972.0.5.20.11.4.1
Table of descriptive information about system events.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SystemEventsEntry

systemEventsEntry 1.3.6.1.4.1.25972.0.5.20.11.4.1.1
An entry in the table, containing type of system events.
Status: current Access: read-only
OBJECT-TYPE    
  SystemEventsEntry  

eventSystemEventsIndex 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.1
Index of events.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eventDeviceRestartEvent 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.2
Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER log(1), smtp(2), logandsmtp(3), disabled(4)  

eventPowerStatusEvent 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.3
Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER log(1), smtp(2), logandsmtp(3), disabled(4)  

eventAuthenticationFailureEvent 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.4
Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER log(1), smtp(2), logandsmtp(3), disabled(4)  

eventRingTopologyChangeEvent 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.5
Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER log(1), smtp(2), logandsmtp(3), disabled(4)  

portEventsTable 1.3.6.1.4.1.25972.0.5.20.11.4.2
Table of descriptive information about port events.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortEventsEntry

portEventsEntry 1.3.6.1.4.1.25972.0.5.20.11.4.2.1
An entry in the table, containing type of port events.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortEventsEntry  

eventPortNumber 1.3.6.1.4.1.25972.0.5.20.11.4.2.1.1
Port number for port event table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eventPortEventLog 1.3.6.1.4.1.25972.0.5.20.11.4.2.1.2
Parameter to indicate the which event should be logged. The value can't be modified, if syslogStatus is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER linkup(1), linkdown(2), linkupandlinkdown(3), disabled(4)  

eventPortEventSMTP 1.3.6.1.4.1.25972.0.5.20.11.4.2.1.3
Parameter to indicate the which event should be an Email alert. The value can't be modified, if eventEmailAlertStatus is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER linkup(1), linkdown(2), linkupandlinkdown(3), disabled(4)  

syslogStatus 1.3.6.1.4.1.25972.0.5.20.11.2.1
Parameter to specify the log should be sent to syslog server, or the log should be kept in switch. When disabled, the switch won't send out or record any log.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clientOnly(1), serverOnly(2), bothClientAndServer(3), disabled(4)  

eventServerAddr 1.3.6.1.4.1.25972.0.5.20.11.2.2
The IP address of syslog server. It can't be modified when syslogStatus is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eventEmailAlertStatus 1.3.6.1.4.1.25972.0.5.20.11.3.1
Parameter to enable the Email alert feature, When enabled, the switch will send the mail to the address presented in emailAlertRcptTable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

eventEmailAlertAddr 1.3.6.1.4.1.25972.0.5.20.11.3.2
The IP address of SMTP server. It can't be modified when eventEmailAlertStatus is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..100)  

eventEmailAlertAuthentication 1.3.6.1.4.1.25972.0.5.20.11.3.3
Parameter to enable the authentication feature SMTP server. It can't be modified when eventEmailAlertStatus is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

eventEmailAlertAccount 1.3.6.1.4.1.25972.0.5.20.11.3.4
The Email account for SMTP server. It can't be modified when eventEmailAlertAuthentication is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..70)  

eventEmailAlertPassword 1.3.6.1.4.1.25972.0.5.20.11.3.5
The password of Email account. It can't be modified when eventEmailAlertAuthentication is disabled.
Status: current Access: write-only
OBJECT-TYPE    
  DisplayString Size(0..36)  

emailAlertRcptTable 1.3.6.1.4.1.25972.0.5.20.11.3.6
Table of descriptive information of recipient Email address list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EmailAlertRcptEntry

emailAlertRcptEntry 1.3.6.1.4.1.25972.0.5.20.11.3.6.1
An entry in the table, containing recipient Email addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  EmailAlertRcptEntry  

eventEmailAlertRcptIndex 1.3.6.1.4.1.25972.0.5.20.11.3.6.1.1
Index of recipient Email address.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eventEmailAlertRcptEmailAddr 1.3.6.1.4.1.25972.0.5.20.11.3.6.1.2
The recipient Email address.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..48)  

macAddressTable 1.3.6.1.4.1.25972.0.5.20.12.1
OBJECT IDENTIFIER    

portStatistic 1.3.6.1.4.1.25972.0.5.20.12.2
OBJECT IDENTIFIER    

portmirroring 1.3.6.1.4.1.25972.0.5.20.12.3
OBJECT IDENTIFIER    

eventLog 1.3.6.1.4.1.25972.0.5.20.12.4
OBJECT IDENTIFIER    

agingTimeSetting 1.3.6.1.4.1.25972.0.5.20.12.1.1
The MAC address table flush time.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

flushMACStatus 1.3.6.1.4.1.25972.0.5.20.12.1.2
(1)Enable Flush MAC address table when ports link down. (2)Disable Flush MAC address table when ports link down.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

macAddrTable 1.3.6.1.4.1.25972.0.5.20.12.1.3
Table of descriptive information about MAC filter configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MACAddrEntry

macAddrEntry 1.3.6.1.4.1.25972.0.5.20.12.1.3.1
An entry in the table, containing inforamtion about all MAC configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  MACAddrEntry  

macAddressAddr 1.3.6.1.4.1.25972.0.5.20.12.1.3.1.1
MAC address of the entry.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

macAddressPortName 1.3.6.1.4.1.25972.0.5.20.12.1.3.1.2
The port name, if you want to insert a new MAC entry, the port name must be correct (Please refer to the switchCurrentPortNameListTable) when creating a new entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..7)  

macAddressType 1.3.6.1.4.1.25972.0.5.20.12.1.3.1.3
The type of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), static(2)  

portSecurityClearMACTable 1.3.6.1.4.1.25972.0.5.20.12.1.4
Set to active for cleaning all the MAC entries in MAC table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notActive(2)  

switchPortStatTable 1.3.6.1.4.1.25972.0.5.20.12.2.1
Table of descriptive and statistics information about each switch ports(including expansion slot).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwitchPortStatEntry

switchPortStatEntry 1.3.6.1.4.1.25972.0.5.20.12.2.1.1
An entry in the table, containing information about statistics in one switch port of the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwitchPortStatEntry  

swPortStatIndex 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.1
Index of port statistic table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

swPortStatType 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.2
Indicates the port type.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  


swPortStatState 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.4
Indicates the port state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swPortStatTXGoodPkt 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.5
The count of good packets of TX.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

swPortStatTXBadPkt 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.6
The count of bad packets of TX.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

swPortStatRXGoodPkt 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.7
The count of good packets of RX.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

swPortStatRXBadPkt 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.8
The count of bad packets of RX.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

swPortStatTXAbortPkt 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.9
The count of abort packets of TX.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

swPortStatPacketCollision 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.10
The count of collision.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

swPortMirrorDestinationPortTX 1.3.6.1.4.1.25972.0.5.20.12.3.1
The TX destination port (sniffer port). Destination port can be used to see all monitor port traffic. You can connect sniffer port to lan analysier or netxray.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

swPortMirrorDestinationPortRX 1.3.6.1.4.1.25972.0.5.20.12.3.2
The RX destination port (sniffer port). Destination port can be used to see all monitor port traffic. You can connect sniffer port to lan analysier or netxray.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

switchPortMirrorSourceTable 1.3.6.1.4.1.25972.0.5.20.12.3.3
Table of descriptive information and configuration of port mirror in this system. The Port Sniffer is a method for monitor traffic in switched networks. Use this tabe to select monitor port for this switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwitchPortMirrorSourceEntry

switchPortMirrorSourceEntry 1.3.6.1.4.1.25972.0.5.20.12.3.3.1
An entry in the table, containing information about port mirror.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwitchPortMirrorSourceEntry  

swPortMirrorPortNum 1.3.6.1.4.1.25972.0.5.20.12.3.3.1.1
Port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

swPortMirrorSourcePort 1.3.6.1.4.1.25972.0.5.20.12.3.3.1.2
The mode of source port (monitor port). (1) TX only. (2) RX only. (3) RX and TX. (4) Source port is disabled. The ports you want to monitor. All source port traffic will be copied to destination port (sniffer port).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER txonly(1), rxonly(2), rxandtx(3), disabled(4)  

eventLogTable 1.3.6.1.4.1.25972.0.5.20.12.4.1
Table of descriptive information about logs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EventLogEntry

eventLogEntry 1.3.6.1.4.1.25972.0.5.20.12.4.1.1
An entry in the table, containing list of logs.
Status: current Access: not-accessible
OBJECT-TYPE    
  EventLogEntry  

eventLogIndex 1.3.6.1.4.1.25972.0.5.20.12.4.1.1.1
Index of log.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eventLogDescription 1.3.6.1.4.1.25972.0.5.20.12.4.1.1.2
The description of log.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..100)  

saveCfgMgtAction 1.3.6.1.4.1.25972.0.5.20.13.1
Setting this object to active(1) triger saving current configuration. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notActive(2)  

factoryDefaultAction 1.3.6.1.4.1.25972.0.5.20.14.1
Setting this object to keep-ip-and-username-password(1), keep-ip(2), keep-username-password(3) , and keep-nothing(4), triger loading facotory default configuration. Setting this object to notActive(5) has no effect. The system always returns the value notActive(5) when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER keep-ip-and-username-password(1), keep-ip(2), keep-username-password(3), keep-nothing(4), notActive(5)  

systemRebootAction 1.3.6.1.4.1.25972.0.5.20.15.1
Setting this object to active(1) triger the system restart. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notActive(2)  

specificTrap 1.3.6.1.4.1.25972.0.5.20.24.1
OBJECT IDENTIFIER    

trapPowerStatus 1.3.6.1.4.1.25972.0.5.20.24.1.1
Indicates the switch power status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER power1On-power2On(1), power1On-power2Off(2), power1Off-power2On(3), power1Off-power2Off(4)  

trapTopologyChange 1.3.6.1.4.1.25972.0.5.20.24.1.2
redundantRing topology change counter.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCurrentPortNameListTable 1.3.6.1.4.1.25972.0.5.20.24.2
Table of descriptive and status information about the logical ports in this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwitchCurrentPortNameListEntry

switchCurrentPortNameListEntry 1.3.6.1.4.1.25972.0.5.20.24.2.1
An entry in the table, containing information about logical port name in this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwitchCurrentPortNameListEntry  

swCurrentPortNameListIndex 1.3.6.1.4.1.25972.0.5.20.24.2.1.1
Index of logical port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

swCurrentPortNameListPortName 1.3.6.1.4.1.25972.0.5.20.24.2.1.2
The name of logical port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..7)  

swCurrentPortNameListPortNumber 1.3.6.1.4.1.25972.0.5.20.24.2.1.3
The port number(s) that port name belong to. If the logical port stood for a trunk group, this object shows the members of trunk group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

poeSystemSetting 1.3.6.1.4.1.25972.0.5.20.25.1
OBJECT IDENTIFIER    

poePortStatus 1.3.6.1.4.1.25972.0.5.20.25.2
OBJECT IDENTIFIER    

poePortControl 1.3.6.1.4.1.25972.0.5.20.25.3
OBJECT IDENTIFIER    

poeMaximumPowerAvailable 1.3.6.1.4.1.25972.0.5.20.25.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

poeActualPowerConsumption 1.3.6.1.4.1.25972.0.5.20.25.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

poePortKnockoffDisabled 1.3.6.1.4.1.25972.0.5.20.25.1.3
Port Knockoff Disabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

poeACDisconnect 1.3.6.1.4.1.25972.0.5.20.25.1.4
AC Disconnect
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

poeCapacitiveDetection 1.3.6.1.4.1.25972.0.5.20.25.1.5
Capacitive Detection
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

poePortStatusTable 1.3.6.1.4.1.25972.0.5.20.25.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PoePortStatusEntry

poePortStatusEntry 1.3.6.1.4.1.25972.0.5.20.25.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PoePortStatusEntry  

poePortStatusIndex 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.1
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  


poePortStatusState 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), detecting(2), power-ieee(3), inactive(4), power-managed(5), invalid-pd(6), underload(7), overload(8), error(9), not-available(10)  

poePortStatusCurrent 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.4
Current(mA)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

poePortStatusVoltage 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.5
Voltage(V)
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..200)  

poePortStatusPower 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.6
Power(mW)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

poePortStatusDeterminedClass 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.7
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..200)  

poePortControlTable 1.3.6.1.4.1.25972.0.5.20.25.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PoePortControlEntry

poePortControlEntry 1.3.6.1.4.1.25972.0.5.20.25.3.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PoePortControlEntry  

poePortControlIndex 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.1
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

poePortControlState 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.2
State
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

poePortControlPowerLimitFromClassification 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.3
Power Limit From Classification
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

poePortControlLegacy 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.4
Legacy
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

poePortControlPriority 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.5
Priority
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER critical(1), high(2), low(3)  

poePortControlPowerLimit 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.6
Power Limit (<15400)mW
Status: current Access: read-write
OBJECT-TYPE    
  Integer32