NMS-EPON-OLT-COMM
File:
NMS-EPON-OLT-COMM.mib (14077 bytes)
Imported modules
Imported symbols
Defined Values
oltEncrypStatus |
1.3.6.1.4.1.3320.101.1.1 |
global-level encryption enable or disable for an OLT. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
true(1), false(2) |
|
oltEncrypMode |
1.3.6.1.4.1.3320.101.1.2 |
global-level encryption mode for an OLT. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ctc-churning(2) |
|
oltRekeyingTime |
1.3.6.1.4.1.3320.101.1.3 |
Rekeying timer (in milli-seconds) , range is 600-10000. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
600..10000 |
|
oltLocalLostLinkTimeout |
1.3.6.1.4.1.3320.101.1.4 |
Local lost link timeout between OAMs, range is 2-30s. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
2..30 |
|
oltVlanTransparentMode |
1.3.6.1.4.1.3320.101.1.5 |
OLT Vlan Transparent Mode. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
true(1), false(2) |
|
oltHostQueryFreq |
1.3.6.1.4.1.3320.101.1.6 |
The frequency at which IGMP Host-Query packets are transmitted on OLT. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
10..2147483647 |
|
oltMCSTStatus |
1.3.6.1.4.1.3320.101.1.7 |
EPON Multicast status(enable or disable). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
oltMCSTMode |
1.3.6.1.4.1.3320.101.1.8 |
Config multicast mode.0-IGMP Snooping, 1-CTC dynamic controllable multicast.Only dynamic-controllable(1) is supported. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
igmp-snooping(0), dynamic-controllable(1) |
|
oltIGMPProxyStatus |
1.3.6.1.4.1.3320.101.1.9 |
EPON IGMP Proxy status(enable or disable). IGMP proxy can't be shut in dynamic-controllable mode. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
oltIGMPQuerierAddress |
1.3.6.1.4.1.3320.101.1.10 |
The address of the IGMP Querier of OLT self. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
oltQueryMaxResponseTime |
1.3.6.1.4.1.3320.101.1.11 |
The maximum query response time advertised in IGMPv2 queries(in milli-seconds). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
10..2147483647 |
|
oltLastMemberQueryInterval |
1.3.6.1.4.1.3320.101.1.12 |
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if IGMP Version is 1. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..60 |
|
oltLastMemberQueryCount |
1.3.6.1.4.1.3320.101.1.13 |
The Last Member Query Count. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..5 |
|
oltDLFDrop |
1.3.6.1.4.1.3320.101.1.14 |
OLT Multicast Drop Status. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
oltV1Packets |
1.3.6.1.4.1.3320.101.1.15 |
The number of IGMP V1 packets has been received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
oltV2Packets |
1.3.6.1.4.1.3320.101.1.16 |
The number of IGMP V2 packets has been received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
oltV3Packets |
1.3.6.1.4.1.3320.101.1.17 |
The number of IGMP V3 packets has been received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
oltJoinsPackets |
1.3.6.1.4.1.3320.101.1.18 |
The number of IGMP join packets has been received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
oltLeavesPackets |
1.3.6.1.4.1.3320.101.1.19 |
The number of IGMP leaves packets has been received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
oltGeneralQueryPackets |
1.3.6.1.4.1.3320.101.1.20 |
The number of IGMP General Query packets has been received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
oltSpecialQueryPackets |
1.3.6.1.4.1.3320.101.1.21 |
The number of IGMP Special Query packets has been received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
oltDBAMode |
1.3.6.1.4.1.3320.101.1.22 |
olt DBA mode. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
hardware-DBA(1), software-DBA(2), hybrid-DBA(3), software-DBA-with-dynamic-cycletime(4) |
|
oltDBAAlgorithm |
1.3.6.1.4.1.3320.101.1.23 |
olt DBA algorithm. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
workconserv(1), nonworkconserv(2), cbr(3) |
|
oltPriorityQueueMaping |
1.3.6.1.4.1.3320.101.1.24 |
olt Priority Queue Maping. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
oltSchedulePolicy |
1.3.6.1.4.1.3320.101.1.25 |
olt Schedule Policy. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
sp(0), wrr(1), fcfs(2), hybrid1(3), hybrid2(4), drr(5), sp-exoam(6) |
|
oltWRRScheduleQueuePriority |
1.3.6.1.4.1.3320.101.1.26 |
olt WRR Schedule Queue Priority. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
oltDefaultCoS |
1.3.6.1.4.1.3320.101.1.27 |
olt Default CoS value. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
oltMacAgingTime |
1.3.6.1.4.1.3320.101.1.28 |
olt Mac Address Aging Time. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..1000000 |
|
oltFlowControl |
1.3.6.1.4.1.3320.101.1.29 |
olt Flow Control status. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
oltStormControlBroadcast |
1.3.6.1.4.1.3320.101.1.30 |
olt Storm Control Broadcast, range is 10-1000000kbps |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
10..1000000 |
|
oltStormControlMulticast |
1.3.6.1.4.1.3320.101.1.31 |
olt Storm Control Multicast, range is 10-1000000kbps |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
10..1000000 |
|
oltStormControlUnicast |
1.3.6.1.4.1.3320.101.1.32 |
olt Storm Control Unicast, range is 10-1000000kbps |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
10..1000000 |
|
oltIfDbaParamCycleTime |
1.3.6.1.4.1.3320.101.1.33 |
PON interface DBA parameter cycle time. Range is HW DBA 25000 to 1000000 >>software, DBA 125000 to 1000000. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
25000..1000000 |
|
oltIfDbaParamDiscFreq |
1.3.6.1.4.1.3320.101.1.34 |
PON interface DBA parameter discovery frequency. Range is 0-255. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
oltIfDbaParamDiscTime |
1.3.6.1.4.1.3320.101.1.35 |
PON interface DBA parameter discovery time. Range is 1024-14000. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1024..14000 |
|
oltLlidPortCreateMode |
1.3.6.1.4.1.3320.101.1.37 |
A switch for creating LLID port without binding ONU alone. Dafault value is close(2). If this value is open(1),
the llidCreateTable can create a llid port without binding ONU. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
open(1), close(2) |
|
oltOnuStatusBitstring |
1.3.6.1.4.1.3320.101.1.38 |
Onu Status bitstring.Each bit means corresponding ONU status. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|