NNC-EXT-PM-STATISTICS-MIB

File: NNC-EXT-PM-STATISTICS-MIB.mib (60980 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
IF-MIB	NNCGNI0001-SMI	ATM-MIB
NNC-INTERVAL-STATISTICS-TC-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	TEXTUAL-CONVENTION
MODULE-COMPLIANCE	OBJECT-GROUP	ifIndex
nncExtensions	NncExtCounter64	atmVplVpi
atmVclVci	NncExtIntvlStateType	NncExtAbsIntvlNumberType
NncExtRelIntvlNumberType

Defined Types

NncExtPmCellFlowDirType
This is used to indicate the direction of cell flow. Link describes cells which are traveling to or from an endpoint via the physical interface. Matrix describes cells which are traveling to or from an endpoint via the switching fabric.
TEXTUAL-CONVENTION
	INTEGER	link(1), matrix(2)

NncExtPmTestType
This is used to indicate the type of PM test being performed: Segment or End-to-end.
TEXTUAL-CONVENTION
	INTEGER	segment(1), end2end(2)

NncExtPm15MinCurrentEntry
SEQUENCE
	nncExtPm15MinCurrentCellFlow	NncExtPmCellFlowDirType
	nncExtPm15MinCurrentTest	NncExtPmTestType
	nncExtPm15MinCurrentState	NncExtIntvlStateType
	nncExtPm15MinCurrentAbsoluteIntervalNumber	NncExtAbsIntvlNumberType
	nncExtPm15MinCurrentSECBs	NncExtCounter64
	nncExtPm15MinCurrentLostCellsClp0And1	NncExtCounter64
	nncExtPm15MinCurrentLostCellsClp0	NncExtCounter64
	nncExtPm15MinCurrentMisinsertedCells	NncExtCounter64
	nncExtPm15MinCurrentCellsClp0And1	NncExtCounter64
	nncExtPm15MinCurrentCellsClp0	NncExtCounter64
	nncExtPm15MinCurrentImpairedBlocks	NncExtCounter64
	nncExtPm15MinCurrentTotalLostCellsClp0And1	NncExtCounter64
	nncExtPm15MinCurrentTotalLostCellsClp0	NncExtCounter64
	nncExtPm15MinCurrentIBWithCellLossMisinsert	NncExtCounter64
	nncExtPm15MinCurrentCellLossRatioClp0And1	NncExtCounter64
	nncExtPm15MinCurrentCellLossRatioClp0	NncExtCounter64

NncExtPm15MinIntervalEntry
SEQUENCE
	nncExtPm15MinIntervalCellFlow	NncExtPmCellFlowDirType
	nncExtPm15MinIntervalTest	NncExtPmTestType
	nncExtPm15MinIntervalNumber	NncExtRelIntvlNumberType
	nncExtPm15MinIntervalState	NncExtIntvlStateType
	nncExtPm15MinIntervalAbsoluteIntervalNumber	NncExtAbsIntvlNumberType
	nncExtPm15MinIntervalSECBs	NncExtCounter64
	nncExtPm15MinIntervalLostCellsClp0And1	NncExtCounter64
	nncExtPm15MinIntervalLostCellsClp0	NncExtCounter64
	nncExtPm15MinIntervalMisinsertedCells	NncExtCounter64
	nncExtPm15MinIntervalCellsClp0And1	NncExtCounter64
	nncExtPm15MinIntervalCellsClp0	NncExtCounter64
	nncExtPm15MinIntervalImpairedBlocks	NncExtCounter64
	nncExtPm15MinIntervalTotalLostCellsClp0And1	NncExtCounter64
	nncExtPm15MinIntervalTotalLostCellsClp0	NncExtCounter64
	nncExtPm15MinIntervalIBWithCellLossMisinsert	NncExtCounter64
	nncExtPm15MinIntervalCellLossRatioClp0And1	NncExtCounter64
	nncExtPm15MinIntervalCellLossRatioClp0	NncExtCounter64

NncExtPm24HrCurrentEntry
SEQUENCE
	nncExtPm24HrCurrentCellFlow	NncExtPmCellFlowDirType
	nncExtPm24HrCurrentTest	NncExtPmTestType
	nncExtPm24HrCurrentState	NncExtIntvlStateType
	nncExtPm24HrCurrentAbsoluteIntervalNumber	NncExtAbsIntvlNumberType
	nncExtPm24HrCurrentSECBs	NncExtCounter64
	nncExtPm24HrCurrentErroredCells	NncExtCounter64
	nncExtPm24HrCurrentLostCellsClp0And1	NncExtCounter64
	nncExtPm24HrCurrentLostCellsClp0	NncExtCounter64
	nncExtPm24HrCurrentMisinsertedCells	NncExtCounter64
	nncExtPm24HrCurrentCellsClp0And1	NncExtCounter64
	nncExtPm24HrCurrentCellsClp0	NncExtCounter64
	nncExtPm24HrCurrentImpairedBlocks	NncExtCounter64
	nncExtPm24HrCurrentTotalLostCellsClp0And1	NncExtCounter64
	nncExtPm24HrCurrentTotalLostCellsClp0	NncExtCounter64
	nncExtPm24HrCurrentSECBErrored	NncExtCounter64
	nncExtPm24HrCurrentSECBMisinserted	NncExtCounter64
	nncExtPm24HrCurrentIBWithCellLossMisinsert	NncExtCounter64
	nncExtPm24HrCurrentCellLossRatioClp0And1	NncExtCounter64
	nncExtPm24HrCurrentCellLossRatioClp0	NncExtCounter64

NncExtPm24HrIntervalEntry
SEQUENCE
	nncExtPm24HrIntervalCellFlow	NncExtPmCellFlowDirType
	nncExtPm24HrIntervalTest	NncExtPmTestType
	nncExtPm24HrIntervalNumber	NncExtRelIntvlNumberType
	nncExtPm24HrIntervalState	NncExtIntvlStateType
	nncExtPm24HrIntervalAbsoluteIntervalNumber	NncExtAbsIntvlNumberType
	nncExtPm24HrIntervalSECBs	NncExtCounter64
	nncExtPm24HrIntervalErroredCells	NncExtCounter64
	nncExtPm24HrIntervalLostCellsClp0And1	NncExtCounter64
	nncExtPm24HrIntervalLostCellsClp0	NncExtCounter64
	nncExtPm24HrIntervalMisinsertedCells	NncExtCounter64
	nncExtPm24HrIntervalCellsClp0And1	NncExtCounter64
	nncExtPm24HrIntervalCellsClp0	NncExtCounter64
	nncExtPm24HrIntervalImpairedBlocks	NncExtCounter64
	nncExtPm24HrIntervalTotalLostCellsClp0And1	NncExtCounter64
	nncExtPm24HrIntervalTotalLostCellsClp0	NncExtCounter64
	nncExtPm24HrIntervalSECBErrored	NncExtCounter64
	nncExtPm24HrIntervalSECBMisinserted	NncExtCounter64
	nncExtPm24HrIntervalIBWithCellLossMisinsert	NncExtCounter64
	nncExtPm24HrIntervalCellLossRatioClp0And1	NncExtCounter64
	nncExtPm24HrIntervalCellLossRatioClp0	NncExtCounter64

Defined Values

nncExtPmStatistics		1.3.6.1.4.1.123.3.65
This module contains the definitions for statistics collected for OAM Performance Monitoring. The definition and requirement for these statistics are found in GR-1248-CORE. In addition, Cell Loss Ratio has been added as part of the Newbridge extension. This MIB module contains the following tables: OAM PM 15 Minute Current Table OAM PM 15 Minute Interval Table OAM PM 24 Hour Current Table OAM PM 24 Hour Interval Table These tables are heavily influenced by the definition of VPL/VCL described in rfc1695. The number of intervals supported is dependent upon resource availibility on any given product, but should nominally be 32 for 15 Minute intervals and 2 for 24 Hour intervals. To avoid building in massive amounts of storage, some products may adopt a bulk collection scheme. Intervals: Statistics on the performance of VPL/VCLs are collected over a historical stratum of up to a maximum of M intervals. The value of M is a function of a product's storage capability. For example, on the 36170 product, M = 32 for 15 Minute interval. The 15 Minute intervals are aligned to the quarter of one hour of a wall clock. The current interval spans back to the last 15 minute tick on the wall clock. Continuing along the timeline from that point is the most recently completed interval and has an index of 1. The previous interval has an index of 2 and so on. Note that the oldest interval may be incomplete since the statistic collection may have been enabled offset to the quarter or one hour tick. t 0 -1i -2i -3i ===========\|===========\|===========\|===========\|=========== current N = 1 N = 2 N = 3 N = 4 ... N = M interval Performance Monitoring Demarcation Values: As defined in GR-1248-CORE, three demarcation values are defined to evaluate the condition of a PM cell block. These are M errored, M lost and M misinserted. These values are configurable on a system-wide basis. Where applicable, the definition of a statistics object in this module will refer to one or more of these values.
MODULE-IDENTITY

nncExtPmStatisticsObjects		1.3.6.1.4.1.123.3.65.1
OBJECT IDENTIFIER

nncExtPmStatisticsTraps		1.3.6.1.4.1.123.3.65.2
OBJECT IDENTIFIER

nncExtPmStatisticsGroups		1.3.6.1.4.1.123.3.65.3
OBJECT IDENTIFIER

nncExtPmStatisticsCompliances		1.3.6.1.4.1.123.3.65.4
OBJECT IDENTIFIER

nncExtPm15MinCurrentTable		1.3.6.1.4.1.123.3.65.1.1
This table contains objects for OAM Performance Monitoring of an endpoint (VP or VC) during the current 15 minute interval.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NncExtPm15MinCurrentEntry

nncExtPm15MinCurrentEntry		1.3.6.1.4.1.123.3.65.1.1.1
An entry in the 15 minute current statistics table. Each row contains current statistics for an endpoint collecting PM statistics. Note that for a VP endpoint, the VCI value is 0.
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtPm15MinCurrentEntry

nncExtPm15MinCurrentCellFlow		1.3.6.1.4.1.123.3.65.1.1.1.1
Link or matrix cell flow
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtPmCellFlowDirType

nncExtPm15MinCurrentTest		1.3.6.1.4.1.123.3.65.1.1.1.2
Segment or end-to-end test
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtPmTestType

nncExtPm15MinCurrentState		1.3.6.1.4.1.123.3.65.1.1.1.3
The state of the current interval. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtIntvlStateType

nncExtPm15MinCurrentAbsoluteIntervalNumber		1.3.6.1.4.1.123.3.65.1.1.1.4
The absolute interval number of this interval.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtAbsIntvlNumberType

nncExtPm15MinCurrentSECBs		1.3.6.1.4.1.123.3.65.1.1.1.5
Severely Errored Cell Blocks. This counter is incremented by one for each PM cell block when M errored, M lost or M misinserted is exceeded.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinCurrentLostCellsClp0And1		1.3.6.1.4.1.123.3.65.1.1.1.6
Lost 0+1 User Information Cells. For each PM cell block, if the number of Lost 0+1 User Information Cells does not exceed M lost, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinCurrentLostCellsClp0		1.3.6.1.4.1.123.3.65.1.1.1.7
Lost 0 User Information Cells. For each PM cell block, if the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) does not exceed M lost, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinCurrentMisinsertedCells		1.3.6.1.4.1.123.3.65.1.1.1.8
Misinserted User Information Cells. For each PM cell block, if the number of excess User Information Cells does not exceed M misinserted, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinCurrentCellsClp0And1		1.3.6.1.4.1.123.3.65.1.1.1.9
Number of Transmitted 0+1 User Information Cells. For each PM cell block, the number of 0+1 User Information Cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinCurrentCellsClp0		1.3.6.1.4.1.123.3.65.1.1.1.10
Number of Transmitted 0 User Information Cells. For each PM cell block, the number of 0 User Information Cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinCurrentImpairedBlocks		1.3.6.1.4.1.123.3.65.1.1.1.11
Impaired Blocks. This counter is incremented by one when a PM cell block has at least one impairment of any type.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinCurrentTotalLostCellsClp0And1		1.3.6.1.4.1.123.3.65.1.1.1.12
Total Lost 0+1 User Information Cells. For each PM cell block, the number of Lost 0+1 User Information Cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinCurrentTotalLostCellsClp0		1.3.6.1.4.1.123.3.65.1.1.1.13
Total Lost 0 User Information Cells. For each PM cell block, the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinCurrentIBWithCellLossMisinsert		1.3.6.1.4.1.123.3.65.1.1.1.14
Number of Impaired Blocks with Cell Loss/ Misinsertion. For each PM cell block, the number of lost or misinserted cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinCurrentCellLossRatioClp0And1		1.3.6.1.4.1.123.3.65.1.1.1.15
Cell Loss Ratio 0+1. Ratio of cell loss calculated by ((Total Lost 0+1 User Information Cells) / (Number of Transmitted 0+1 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinCurrentCellLossRatioClp0		1.3.6.1.4.1.123.3.65.1.1.1.16
Cell Loss Ratio 0. Ratio of cell loss calculated by ((Total Lost 0 User Information Cells) / (Number of Transmitted 0 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinIntervalTable		1.3.6.1.4.1.123.3.65.1.2
This table contains objects for OAM Performance Monitoring of an endpoint (VP or VC) over a historical stratum of M 15 minute intervals.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NncExtPm15MinIntervalEntry

nncExtPm15MinIntervalEntry		1.3.6.1.4.1.123.3.65.1.2.1
An entry in the 15 minute interval statistics table. Each row contains interval statistics for an endpoint collecting PM statistics. Note that for a VP endpoint, the VCI value is 0.
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtPm15MinIntervalEntry

nncExtPm15MinIntervalCellFlow		1.3.6.1.4.1.123.3.65.1.2.1.1
Link or matrix cell flow
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtPmCellFlowDirType

nncExtPm15MinIntervalTest		1.3.6.1.4.1.123.3.65.1.2.1.2
Segment or end-to-end test
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtPmTestType

nncExtPm15MinIntervalNumber		1.3.6.1.4.1.123.3.65.1.2.1.3
The interval number (N) of the statistics in this row.
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtRelIntvlNumberType

nncExtPm15MinIntervalState		1.3.6.1.4.1.123.3.65.1.2.1.4
The state of the interval represented by this row. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtIntvlStateType

nncExtPm15MinIntervalAbsoluteIntervalNumber		1.3.6.1.4.1.123.3.65.1.2.1.5
The absolute interval number of this interval.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtAbsIntvlNumberType

nncExtPm15MinIntervalSECBs		1.3.6.1.4.1.123.3.65.1.2.1.6
Severely Errored Cell Blocks. This counter is incremented by one for each PM cell block when M errored, M lost or M misinserted is exceeded.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinIntervalLostCellsClp0And1		1.3.6.1.4.1.123.3.65.1.2.1.7
Lost 0+1 User Information Cells. For each PM cell block, if the number of Lost 0+1 User Information Cells does not exceed M lost, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinIntervalLostCellsClp0		1.3.6.1.4.1.123.3.65.1.2.1.8
Lost 0 User Information Cells. For each PM cell block, if the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) does not exceed M lost, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinIntervalMisinsertedCells		1.3.6.1.4.1.123.3.65.1.2.1.9
Misinserted User Information Cells. For each PM cell block, if the number of excess User Information Cells does not exceed M misinserted, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinIntervalCellsClp0And1		1.3.6.1.4.1.123.3.65.1.2.1.10
Number of Transmitted 0+1 User Information Cells. For each PM cell block, the number of 0+1 User Information Cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinIntervalCellsClp0		1.3.6.1.4.1.123.3.65.1.2.1.11
Number of Transmitted 0 User Information Cells. For each PM cell block, the number of 0 User Information Cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinIntervalImpairedBlocks		1.3.6.1.4.1.123.3.65.1.2.1.12
Impaired Blocks. This counter is incremented by one when a PM cell block has at least one impairment of any type.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinIntervalTotalLostCellsClp0And1		1.3.6.1.4.1.123.3.65.1.2.1.13
Total Lost 0+1 User Information Cells. For each PM cell block, the number of Lost 0+1 User Information Cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinIntervalTotalLostCellsClp0		1.3.6.1.4.1.123.3.65.1.2.1.14
Total Lost 0 User Information Cells. For each PM cell block, the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinIntervalIBWithCellLossMisinsert		1.3.6.1.4.1.123.3.65.1.2.1.15
Number of Impaired Blocks with Cell Loss/ Misinsertion. For each PM cell block, the number of lost or misinserted cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinIntervalCellLossRatioClp0And1		1.3.6.1.4.1.123.3.65.1.2.1.16
Cell Loss Ratio 0+1. Ratio of cell loss calculated by ((Total Lost 0+1 User Information Cells) / (Number of Transmitted 0+1 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinIntervalCellLossRatioClp0		1.3.6.1.4.1.123.3.65.1.2.1.17
Cell Loss Ratio 0. Ratio of cell loss calculated by ((Total Lost 0 User Information Cells) / (Number of Transmitted 0 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentTable		1.3.6.1.4.1.123.3.65.1.3
This table contains objects for OAM Performance Monitoring of an endpoint (VP or VC) during the current 24 hour interval.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NncExtPm24HrCurrentEntry

nncExtPm24HrCurrentEntry		1.3.6.1.4.1.123.3.65.1.3.1
An entry in the 24 hour current statistics table. Each row contains current statistics for an endpoint collecting PM statistics. Note that for a VP endpoint, the VCI value is 0.
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtPm24HrCurrentEntry

nncExtPm24HrCurrentCellFlow		1.3.6.1.4.1.123.3.65.1.3.1.1
Link or matrix cell flow
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtPmCellFlowDirType

nncExtPm24HrCurrentTest		1.3.6.1.4.1.123.3.65.1.3.1.2
Segment or end-to-end test
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtPmTestType

nncExtPm24HrCurrentState		1.3.6.1.4.1.123.3.65.1.3.1.3
The state of the current interval. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtIntvlStateType

nncExtPm24HrCurrentAbsoluteIntervalNumber		1.3.6.1.4.1.123.3.65.1.3.1.4
The absolute interval number of this interval.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtAbsIntvlNumberType

nncExtPm24HrCurrentSECBs		1.3.6.1.4.1.123.3.65.1.3.1.5
Severely Errored Cell Blocks. This counter is incremented by one for each PM cell block when M errored, M lost or M misinserted is exceeded.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentErroredCells		1.3.6.1.4.1.123.3.65.1.3.1.6
Errored Cells. For each PM cell block, if the number of errored cells does not exceed M errored, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentLostCellsClp0And1		1.3.6.1.4.1.123.3.65.1.3.1.7
Lost 0+1 User Information Cells. For each PM cell block, if the number of Lost 0+1 User Information Cells does not exceed M lost, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentLostCellsClp0		1.3.6.1.4.1.123.3.65.1.3.1.8
Lost 0 User Information Cells. For each PM cell block, if the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) does not exceed M lost, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentMisinsertedCells		1.3.6.1.4.1.123.3.65.1.3.1.9
Misinserted User Information Cells. For each PM cell block, if the number of excess User Information Cells does not exceed M misinserted, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentCellsClp0And1		1.3.6.1.4.1.123.3.65.1.3.1.10
Number of Transmitted 0+1 User Information Cells. For each PM cell block, the number of 0+1 User Information Cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentCellsClp0		1.3.6.1.4.1.123.3.65.1.3.1.11
Number of Transmitted 0 User Information Cells. For each PM cell block, the number of 0 User Information Cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentImpairedBlocks		1.3.6.1.4.1.123.3.65.1.3.1.12
Impaired Blocks. This counter is incremented by one when a PM cell block has at least one impairment of any type.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentTotalLostCellsClp0And1		1.3.6.1.4.1.123.3.65.1.3.1.13
Total Lost 0+1 User Information Cells. For each PM cell block, the number of Lost 0+1 User Information Cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentTotalLostCellsClp0		1.3.6.1.4.1.123.3.65.1.3.1.14
Total Lost 0 User Information Cells. For each PM cell block, the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentSECBErrored		1.3.6.1.4.1.123.3.65.1.3.1.15
SECB Errored (i.e. SECB due to bit errors). This counter is incremented by one for each PM cell block when M errored is exceeded.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentSECBMisinserted		1.3.6.1.4.1.123.3.65.1.3.1.16
SECB Misinserted (i.e. SECB due to misinserted cells). This counter is incremented by one for each PM cell block when M misinserted is exceeded.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentIBWithCellLossMisinsert		1.3.6.1.4.1.123.3.65.1.3.1.17
Number of Impaired Blocks with Cell Loss/ Misinsertion. For each PM cell block, the number of lost or misinserted cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentCellLossRatioClp0And1		1.3.6.1.4.1.123.3.65.1.3.1.18
Cell Loss Ratio 0+1. Ratio of cell loss calculated by ((Total Lost 0+1 User Information Cells) / (Number of Transmitted 0+1 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrCurrentCellLossRatioClp0		1.3.6.1.4.1.123.3.65.1.3.1.19
Cell Loss Ratio 0. Ratio of cell loss calculated by ((Total Lost 0 User Information Cells) / (Number of Transmitted 0 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalTable		1.3.6.1.4.1.123.3.65.1.4
This table contains objects for OAM Performance Monitoring of an endpoint (VP or VC) over a historical stratum of N 24 hour intervals.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NncExtPm24HrIntervalEntry

nncExtPm24HrIntervalEntry		1.3.6.1.4.1.123.3.65.1.4.1
An entry in the 24 hour interval statistics table. Each row contains interval statistics for an endpoint collecting PM statistics. Note that for a VP endpoint, the VCI value is 0.
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtPm24HrIntervalEntry

nncExtPm24HrIntervalCellFlow		1.3.6.1.4.1.123.3.65.1.4.1.1
Link or matrix cell flow
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtPmCellFlowDirType

nncExtPm24HrIntervalTest		1.3.6.1.4.1.123.3.65.1.4.1.2
Segment or end-to-end test
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtPmTestType

nncExtPm24HrIntervalNumber		1.3.6.1.4.1.123.3.65.1.4.1.3
The interval number (N) of the statistics in this row.
Status: current	Access: not-accessible
OBJECT-TYPE
	NncExtRelIntvlNumberType

nncExtPm24HrIntervalState		1.3.6.1.4.1.123.3.65.1.4.1.4
The state of the interval represented by this row. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtIntvlStateType

nncExtPm24HrIntervalAbsoluteIntervalNumber		1.3.6.1.4.1.123.3.65.1.4.1.5
The absolute interval number of this interval.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtAbsIntvlNumberType

nncExtPm24HrIntervalSECBs		1.3.6.1.4.1.123.3.65.1.4.1.6
Severely Errored Cell Blocks. This counter is incremented by one for each PM cell block when M errored, M lost or M misinserted is exceeded.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalErroredCells		1.3.6.1.4.1.123.3.65.1.4.1.7
Errored Cells. For each PM cell block, if the number of errored cells does not exceed M errored, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalLostCellsClp0And1		1.3.6.1.4.1.123.3.65.1.4.1.8
Lost 0+1 User Information Cells. For each PM cell block, if the number of Lost 0+1 User Information Cells does not exceed M lost, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalLostCellsClp0		1.3.6.1.4.1.123.3.65.1.4.1.9
Lost 0 User Information Cells. For each PM cell block, if the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) does not exceed M lost, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalMisinsertedCells		1.3.6.1.4.1.123.3.65.1.4.1.10
Misinserted User Information Cells. For each PM cell block, if the number of excess User Information Cells does not exceed M misinserted, then this number is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalCellsClp0And1		1.3.6.1.4.1.123.3.65.1.4.1.11
Number of Transmitted 0+1 User Information Cells. For each PM cell block, the number of 0+1 User Information Cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalCellsClp0		1.3.6.1.4.1.123.3.65.1.4.1.12
Number of Transmitted 0 User Information Cells. For each PM cell block, the number of 0 User Information Cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalImpairedBlocks		1.3.6.1.4.1.123.3.65.1.4.1.13
Impaired Blocks. This counter is incremented by one when a PM cell block has at least one impairment of any type.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalTotalLostCellsClp0And1		1.3.6.1.4.1.123.3.65.1.4.1.14
Total Lost 0+1 User Information Cells. For each PM cell block, the number of Lost 0+1 User Information Cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalTotalLostCellsClp0		1.3.6.1.4.1.123.3.65.1.4.1.15
Total Lost 0 User Information Cells. For each PM cell block, the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalSECBErrored		1.3.6.1.4.1.123.3.65.1.4.1.16
SECB Errored (i.e. SECB due to bit errors). This counter is incremented by one for each PM cell block when M errored is exceeded.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalSECBMisinserted		1.3.6.1.4.1.123.3.65.1.4.1.17
SECB Misinserted (i.e. SECB due to misinserted cells). This counter is incremented by one for each PM cell block when M misinserted is exceeded.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalIBWithCellLossMisinsert		1.3.6.1.4.1.123.3.65.1.4.1.18
Number of Impaired Blocks with Cell Loss/ Misinsertion. For each PM cell block, the number of lost or misinserted cells is added to this counter.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalCellLossRatioClp0And1		1.3.6.1.4.1.123.3.65.1.4.1.19
Cell Loss Ratio 0+1. Ratio of cell loss calculated by ((Total Lost 0+1 User Information Cells) / (Number of Transmitted 0+1 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm24HrIntervalCellLossRatioClp0		1.3.6.1.4.1.123.3.65.1.4.1.20
Cell Loss Ratio 0. Ratio of cell loss calculated by ((Total Lost 0 User Information Cells) / (Number of Transmitted 0 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
Status: current	Access: read-only
OBJECT-TYPE
	NncExtCounter64

nncExtPm15MinCurrentGroup		1.3.6.1.4.1.123.3.65.3.1
A collection of objects providing current 15 min PM statistics for a PM sink point.
Status: current	Access: read-only
OBJECT-GROUP

nncExtPm15MinIntervalGroup		1.3.6.1.4.1.123.3.65.3.2
A collection of objects providing interval 15 min PM statistics for a PM sink point.
Status: current	Access: read-only
OBJECT-GROUP

nncExtPm24HrCurrentGroup		1.3.6.1.4.1.123.3.65.3.3
A collection of objects providing current 24 hour PM statistics for a PM sink point.
Status: current	Access: read-only
OBJECT-GROUP

nncExtPm24HrIntervalGroup		1.3.6.1.4.1.123.3.65.3.4
A collection of objects providing interval 24 hour PM statistics for a PM sink point.
Status: current	Access: read-only
OBJECT-GROUP

nncExtPmStatisticsCompliance		1.3.6.1.4.1.123.3.65.4.1
The compliance statement for Newbridge OAM Performance Monitoring extension.
Status: current	Access: read-only
MODULE-COMPLIANCE