NOKIAVPN-CONFIG-MIB

File: NOKIAVPN-CONFIG-MIB.mib (4736 bytes)

Imported modules

NOKIAVPN-MIB SNMPv2-SMI

Imported symbols

nokiaVPNModules config MODULE-IDENTITY
OBJECT-TYPE NOTIFICATION-TYPE IpAddress
Integer32

Defined Values

nokiaVPNConfigMIB 1.3.6.1.4.1.94.1.41.5.6
NokiaVPN Configuration MIB module.
MODULE-IDENTITY    

configDirtyBit 1.3.6.1.4.1.94.1.41.2.3.1
Says whether the configuration has been changed via a set on any of the writable SNMP variables.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

configCommit 1.3.6.1.4.1.94.1.41.2.3.2
When an SNMP management station sets (changes) a configuration parameter via an SNMP set operation, the SNMP agent code will set a dirty bit. The management station can then submit a set operation on this configCommit variable to write the configuration to flash, thereby committing the change. Performing a read on this variable will return the value of the config dirty bit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

configPollrate 1.3.6.1.4.1.94.1.41.2.3.3
Defines how often in seconds SNMP Agent checks system resources for capasity-limit-exceeded -trap sending purposes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configTrapDelay 1.3.6.1.4.1.94.1.41.2.3.4
Defines how often (at most) one type of trap is sent in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configTresholdCPUUsage 1.3.6.1.4.1.94.1.41.2.3.5
Defines the treshold (percentage) of CPU utilisation after which a trap is sent.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configTresholdIOLoad 1.3.6.1.4.1.94.1.41.2.3.6
Defines the treshold (pkts/sec divided by system performance rating) of I/O load after which a trap is sent.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configTresholdUDPDrop 1.3.6.1.4.1.94.1.41.2.3.7
Defines the UDP packet drop rate treshold (percentage) after which a trap is sent.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configTresholdIPDrop 1.3.6.1.4.1.94.1.41.2.3.8
Defines the IP packet drop rate treshold (percentage) after which a trap is sent.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configTresholdMemUsage 1.3.6.1.4.1.94.1.41.2.3.9
Defines the memory usage treshold (percentage) after which a trap is sent.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configValCPUUsage 1.3.6.1.4.1.94.1.41.2.3.10
The current CPU (the most loaded CPU) usage (percentage).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configValIOLoad 1.3.6.1.4.1.94.1.41.2.3.11
The current I/O load (pkts/sec divided by system performance rating) .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configValUDPDrop 1.3.6.1.4.1.94.1.41.2.3.12
The current UDP packet drop rate (percentage).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configValIPDrop 1.3.6.1.4.1.94.1.41.2.3.13
The current IP packet drop rate (percentage).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configValMemUsage 1.3.6.1.4.1.94.1.41.2.3.14
The current memory usage (percentage).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32