NSTACK-MIB

File: NSTACK-MIB.mib (32008 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

enterprises IpAddress OBJECT-TYPE
DisplayString

Defined Types

PortsBitmap  
OCTET STRING    

NbsStackSlotEntry  
SEQUENCE    
  nbsStackSlotIndex INTEGER
  nbsStackSlotType INTEGER
  nbsStackSlotMgmtStatus INTEGER
  nbsStackSlotPortsMaxNumber INTEGER
  nbsStackSlotPortsNumber INTEGER
  nbsStackSlotFirstPort INTEGER
  nbsStackSlotOperStatus INTEGER
  nbsStackSlotAdminStatus INTEGER
  nbsStackSlotRedundantPSMode INTEGER
  nbsStackSlotUplinkModulesNumber INTEGER
  nbsStackSlotReset INTEGER
  nbsStackSlotIp IpAddress
  nbsStackSlotHwVers INTEGER
  nbsStackSlotSwVers INTEGER

NbsStackSlotUplEntry  
SEQUENCE    
  nbsStackSlotNumber INTEGER
  nbsStackSlotUplNumber INTEGER
  nbsStackSlotUplType INTEGER
  nbsStackSlotUplSwVers INTEGER
  nbsStackSlotUplHwVers INTEGER
  nbsStackSlotUplNPorts INTEGER
  nbsStackSlotUplFirstPort INTEGER
  nbsStackSlotUplPortsMask PortsBitmap
  nbsStackSlotUplStatus INTEGER
  nbsStackSlotUplHwDescr DisplayString
  nbsStackSlotUplSwDescr DisplayString

NbsStackSpecSlotEntry  
SEQUENCE    
  nbsStackSlotSpecNumber INTEGER
  nbsStackSlotSpecUplNumber INTEGER
  nbsStackSlotSpecUplRedundantMode INTEGER
  nbsStackSlotSpecUplLeftLinkLed INTEGER
  nbsStackSlotSpecUplLeftActivityLed INTEGER
  nbsStackSlotSpecUplRightLinkLed INTEGER
  nbsStackSlotSpecUplRightActivityLed INTEGER

Defined Values

nbase 1.3.6.1.4.1.629
OBJECT IDENTIFIER    

nbSwitchG1 1.3.6.1.4.1.629.1
OBJECT IDENTIFIER    

nbSwitchG1Il 1.3.6.1.4.1.629.1.50
OBJECT IDENTIFIER    

nbsStackInfo 1.3.6.1.4.1.629.1.50.4
OBJECT IDENTIFIER    

nbsStackSlotCapacity 1.3.6.1.4.1.629.1.50.4.1
Max quantity of Slots possible in the Stack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotsTableSize 1.3.6.1.4.1.629.1.50.4.2
Real size of Slots Table in the Stack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackPortsCapacity 1.3.6.1.4.1.629.1.50.4.3
Max quantity of Ports possible in the Stack .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotPortsCapacity 1.3.6.1.4.1.629.1.50.4.4
Max quantity of Ports possible in the Slot .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotTable 1.3.6.1.4.1.629.1.50.4.5
Table of descriptive and status information about the Slots.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NbsStackSlotEntry

nbsStackSlotEntry 1.3.6.1.4.1.629.1.50.4.5.1
An entry in the table, containing information about a single Slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NbsStackSlotEntry  

nbsStackSlotIndex 1.3.6.1.4.1.629.1.50.4.5.1.1
This object identifies the Slot# for which this entry contains information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotType 1.3.6.1.4.1.629.1.50.4.5.1.2
Slot Types: empty - Slot is Empty; unknown - Slot is of the Unknown type; standAlone - Stand Alone Device; universal - Slot including Uplink Modules of the different types; eth20Ports10or100TP- Slot including 20 fast copper 10/100 MBps Ports; eth40Ports10TP - Slot including 40 normal copper 10 MBps Ports; eth10Ports100FO - Slot including 10 fast fibre optic 100 MBps Ports(Multi Mode); eth16Ports10or100TP- Slot including 16 fast copper 10/100 MBps Ports; eth4Ports1000FO - Slot including 4 GigaBit 1000 MBps Ports(Multi Mode); agentSlot - Slot including CPU Card; routingEngine - Slot including Routing Engine Card; eth8Ports10or100TP - Slot including 8 fast copper 10/100 MBps Ports; eth2Ports100FOMM - Slot including 2 fast fibre optic 100 MBps Ports(MM=Multi Mode); eth2Ports100FOSM - Slot including 2 fast fibre optic 100 MBps Ports(SM=Single Mode); eth1Ports1000FOMM - Slot including 1 GigaBit 1000 MBps Ports(MM=Multi Mode); eth1Ports1000FOSM - Slot including 1 GigaBit 1000 MBps Ports(SM=Single Mode); eth2Ports1000FOMM - Slot including 2 GigaBit 1000 MBps Ports(MM=Multi Mode); eth2Ports1000FOSM - Slot including 2 GigaBit 1000 MBps Ports(SM=Single Mode); stackableSlotNoLink- Slot including special Stackable Card with no Link; stackableSlotNH2025- Slot including special Stackable Card Linked with the NH2025 Device; stackableSlotReserve1- Slot including special Stackable Card (Reserve1 for the future purposes); -- ykfix30 - 14.07.99 - begin stackableSlotReserve2- Slot including special Stackable Card (Reserve2 for the future purposes); eth2Ports100FO - Slot including 2 fast fibre optic 100 MBps Ports(different configuration of the Multi Mode and/or Single Mode Ports); eth2Ports1000FO - Slot including 2 GigaBit 1000 MBps Ports(different configuration of the Multi Mode and/or Single Mode Ports); eth4Ports100FOMM - Slot including 4 fast fibre optic 100 MBps Ports(MM=Multi Mode); eth4Ports100FOSM - Slot including 4 fast fibre optic 100 MBps Ports(SS=Single Mode); eth4Ports100FO - Slot including 4 fast fibre optic 100 MBps Ports(different configuration of the Multi Mode and/or Single Mode Ports); -- ykfix31 - 9.08.99 - begin eth4Ports10or100TP - Slot including 4 fast copper 10/100 MBps Ports; eth4Ports100MTRJ - Slot including 4 fast fibre optic 100 MBps MTRJ Ports; eth8Ports100MTRJ - Slot including 8 fast fibre optic 100 MBps MTRJ Ports; eth4Ports100VF - Slot including 4 fast fibre optic 100 MBps VF Ports; eth8Ports100VF - Slot including 8 fast fibre optic 100 MBps VF Ports; -- ykfix33 - 1.03.00 - begin ethGigaBitService - Slot including special Giga Bit Service Card (for using Modules with >= 2 GigaBit Ports); eth4Ports100LC - Slot including 4 fast fibre optic 100 MBps LC Ports; eth8Ports100LC - Slot including 8 fast fibre optic 100 MBps LC Ports; eth2Ports10FL - Slot including 2 slow fibre optic 10 MBps FL Ports; eth4Ports10FL - Slot including 4 slow fibre optic 10 MBps FL Ports; -- ykfix39 - 21.09.00 - begin eth1Port100or1000TP- Slot including 1 GigaBit copper 100/1000 MBps TP Ports; eth1Port1000FORED - Slot including 1 GigaBit fibre optic Redundant Port; eth4Ports100TPand2Ports100FO - Slot including 4 copper 100/1000 MBps TP + 2 fast FO 100 MBps Ports; eth4Ports100TPand1Port100FO - Slot including 4 copper 100/1000 MBps TP + 1 fast FO 100 MBps Ports; eth0Ports100TPand2Ports100FO - Slot including 0 copper 100/1000 MBps TP + 2 fast FO 100 MBps Ports; eth4Ports100TPand0Ports100FO - Slot including 4 copper 100/1000 MBps TP + 0 fast FO 100 MBps Ports; eth1Ports1000MTRJ - Slot including 1 GigaBit MTRJ fibre optic 1000 MBps Port; eth1StackPorts100or1000TP - Slot including 1 GigaBit TP copper 100/1000 MBps Port for Low Distances(<= 5m);
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER empty(1), unknown(2), standAlone(3), universal(4), eth20Ports10or100TP(5), eth40Ports10TP(6), eth10Ports100FO(7), eth16Ports10or100TP(8), eth4Ports1000FO(9), agentSlot(10), routingEngine(11), eth8Ports10or100TP(12), eth2Ports100FOMM(13), eth2Ports100FOSM(14), eth1Ports1000FOMM(15), eth1Ports1000FOSM(16), eth2Ports1000FOMM(17), eth2Ports1000FOSM(18), stackableSlotNoLink(19), stackableSlotNH2025(20), stackableSlotReserve1(21), stackableSlotReserve2(22), eth2Ports100FO(23), eth2Ports1000FO(24), eth4Ports100FOMM(25), eth4Ports100FOSM(26), eth4Ports100FO(27), eth4Ports10or100TP(28), eth4Ports100MTRJ(29), eth8Ports100MTRJ(30), eth4Ports100VF(31), eth8Ports100VF(32), ethGigaBitService(33), eth4Ports100LC(34), eth8Ports100LC(35), eth2Ports10FL(36), eth4Ports10FL(37), eth1Port100or1000TP(38), eth1Port1000FORED(39), eth4Ports100TPand2Ports100FO(40), eth4Ports100TPand1Port100FO(41), eth0Ports100TPand2Ports100FO(42), eth4Ports100TPand0Ports100FO(43), eth1Ports1000MTRJ(44), eth1StackPorts100or1000TP(45)  

nbsStackSlotMgmtStatus 1.3.6.1.4.1.629.1.50.4.5.1.3
Slot Module Management Status: master - Master Slot Module; slave - Slave Slot Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER master(1), slave(2)  

nbsStackSlotPortsMaxNumber 1.3.6.1.4.1.629.1.50.4.5.1.4
This object identifies the Maximum possible Ports Number in the Slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotPortsNumber 1.3.6.1.4.1.629.1.50.4.5.1.5
This object identifies the Real Ports Number in the Slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotFirstPort 1.3.6.1.4.1.629.1.50.4.5.1.6
This object identifies the number of the First Port in the Slot, according to the Stack Ports Numeration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotOperStatus 1.3.6.1.4.1.629.1.50.4.5.1.7
Slot Oper Status: switchedOff - Slot is Switched-off; enabled - Slot is enabled; disabled - Slot is disabled; changing - Slot is changing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER switchedOff(1), enabled(2), disabled(3), changing(4)  

nbsStackSlotAdminStatus 1.3.6.1.4.1.629.1.50.4.5.1.8
Slot Admin Status: enabled - Slot is enabled; disabled - Slot is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nbsStackSlotRedundantPSMode 1.3.6.1.4.1.629.1.50.4.5.1.9
Slot Redundant Power Supply Module Status: notConnected - Redundant Power Supply is not Existing; connected - Redundant Power Supply is Existing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notConnected(1), connected(2)  

nbsStackSlotUplinkModulesNumber 1.3.6.1.4.1.629.1.50.4.5.1.10
This object identifies the number of the Uplink Modules in the Slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotReset 1.3.6.1.4.1.629.1.50.4.5.1.11
This object is used to reset the corresponding Slot Module.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER running(1), reset(2)  

nbsStackSlotIp 1.3.6.1.4.1.629.1.50.4.5.1.12
Ip address of the slot (if it has it; if it hasn't - 0.0.0.0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

nbsStackSlotHwVers 1.3.6.1.4.1.629.1.50.4.5.1.13
This object holds the Software Version of the Slot Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotSwVers 1.3.6.1.4.1.629.1.50.4.5.1.14
This object holds the Hardware Version of the Slot Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotUplTable 1.3.6.1.4.1.629.1.50.4.6
A table of Uplink Modules mounted on the corresponding Slot of the Switch.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NbsStackSlotUplEntry

nbsStackSlotUplEntry 1.3.6.1.4.1.629.1.50.4.6.1
Contains the information needed to identify the Uplink Module of the Slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NbsStackSlotUplEntry  

nbsStackSlotNumber 1.3.6.1.4.1.629.1.50.4.6.1.1
The Slot # in the Device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotUplNumber 1.3.6.1.4.1.629.1.50.4.6.1.2
The Uplink Module # in the corresponding Slot in the Device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotUplType 1.3.6.1.4.1.629.1.50.4.6.1.3
Uplink Module Types: uplAbsent - Uplink Module is Absent; uplUnknown - Uplink Module of the Unknown type; upl1GigaMM - Uplink Module including 1 GigaBit 1000 MBps Ports(MM=Multi Mode); upl1GigaSM - Uplink Module including 1 GigaBit 1000 MBps Ports(SM=Single Mode); upl2GigaMM - Uplink Module including 2 GigaBit 1000 MBps Ports(MM=Multi Mode); upl2GigaSM - Uplink Module including 2 GigaBit 1000 MBps Ports(SM=Single Mode); upl1FO - Uplink Module including 1 fast fibre optic 100 MBps Ports; upl1TP - Uplink Module including 1 fast copper 10/100 MBps Ports; upl2FOMM - Uplink Module including 2 fast fibre optic 100 MBps Ports(MM=Multi Mode); upl2FOSM - Uplink Module including 2 fast fibre optic 100 MBps Ports(SM=Single Mode); upl4FOMM - Uplink Module including 4 fast fibre optic 100 MBps Ports(MM=Multi Mode); upl4FOSM - Uplink Module including 4 fast fibre optic 100 MBps Ports(SM=Single Mode); upl8TP - Uplink Module including 8 fast copper 10/100 MBps Ports; upl1ATM - Uplink Module including 1 ATM Port; upl1FDDI - Uplink Module including 1 FDDI Port; uplStackModuleNoLink - special Stacking Module with no Link; uplStackModuleNH2025 - special Stacking Module Linked with the NH2025 Device; uplStackModuleReserve1 - special Stacking Module (Reserve1 for the future purposes); -- ykfix30 - 14.07.99 - begin uplStackModuleReserve2 - special Stacking Module (Reserve2 for the future purposes); upl4TP - Uplink Module including 4 fast copper 10/100 MBps Ports; upl2FO - Uplink Module including 2 fast fibre optic 100 MBps Ports(different configuration of the Multi Mode and/or Single Mode Ports); upl2Giga - Uplink Module including 2 GigaBit 1000 MBps Ports(different configuration of the Multi Mode and/or Single Mode Ports); -- ykfix31 - 9.08.99 - begin upl4FO - Uplink Module including 4 fast fibre optic 100 MBps Ports(different configuration of the Multi Mode and/or Single Mode Ports); upl4MTRJ - Uplink Module including 4 fast fibre optic 100 MBps MTRJ Ports; upl8MTRJ - Uplink Module including 8 fast fibre optic 100 MBps MTRJ Ports; upl4VF - Uplink Module including 4 fast fibre optic 100 MBps VF Ports; -- ykfix33 - 1.03.00 - begin upl8VF - Uplink Module including 8 fast fibre optic 100 MBps VF Ports; upl4LC - Uplink Module including 4 fast fibre optic 100 MBps LC Ports; upl8LC - Uplink Module including 8 fast fibre optic 100 MBps LC Ports; upl2FL - Uplink Module including 2 slow fibre optic 10 MBps FL Ports; upl4FL - Uplink Module including 4 slow fibre optic 10 MBps FL Ports; -- ykfix39 - 21.09.00 - begin upl1GigaTP - Uplink Module including 1 GigaBit copper 100/1000 MBps TP Ports; upl1GER - Uplink Module including 1 GigaBit fibre optic Redundant Port; upl4TP2FO - Uplink Module including 4 copper 10/100 MBps TP + 2 fast FO 100 MBps Ports; upl4TP1FO - Uplink Module including 4 copper 10/100 MBps TP + 1 fast FO 100 MBps Ports; upl0TP2FO - Uplink Module including 0 copper 10/100 MBps TP + 2 fast FO 100 MBps Ports; upl4TP0FO - Uplink Module including 4 copper 10/100 MBps TP + 0 fast FO 100 MBps Ports; upl1GigaMTRJ- Uplink Module including 1 GigaBit MTRJ fibre optic 1000 MBps Port; upl1GigaStackTP- Uplink Module including 1 GigaBit TP copper 1000 MBps Port for Low Distances(<= 5m);
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER uplAbsent(1), uplUnknown(2), upl1GigaMM(3), upl1GigaSM(4), upl2GigaMM(5), upl2GigaSM(6), upl1FO(7), upl1TP(8), upl2FOMM(9), upl2FOSM(10), upl4FOMM(11), upl4FOSM(12), upl8TP(13), upl1ATM(14), upl1FDDI(15), uplStackModuleNoLink(16), uplStackModuleNH2025(17), uplStackModuleReserve1(18), uplStackModuleReserve2(19), upl4TP(20), upl2FO(21), upl2Giga(22), upl4FO(23), upl4MTRJ(24), upl8MTRJ(25), upl4VF(26), upl8VF(27), upl4LC(28), upl8LC(29), upl2FL(30), upl4FL(31), upl1GigaTP(32), upl1GER(33), upl4TP2FO(34), upl4TP1FO(35), upl0TP2FO(36), upl4TP0FO(37), upl1GigaMTRJ(38), upl1GigaStackTP(39)  

nbsStackSlotUplSwVers 1.3.6.1.4.1.629.1.50.4.6.1.4
This object holds the Software Version of the Uplink Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotUplHwVers 1.3.6.1.4.1.629.1.50.4.6.1.5
This object holds the Hardware Version of the Uplink Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotUplNPorts 1.3.6.1.4.1.629.1.50.4.6.1.6
Number of Ports in the current UpLink Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotUplFirstPort 1.3.6.1.4.1.629.1.50.4.6.1.7
This object identifies the number of the First Port in the Uplink Module, according to the Stack Ports Numeration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotUplPortsMask 1.3.6.1.4.1.629.1.50.4.6.1.8
Contains the list of the ports in the Uplink Module. The representation is a bit map. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the Uplink Module is represented by a single bit within the value of this object. If that bit has a value of <1> then that port is exists in the Uplink Module. The port is not exists if its bit has a value of <0>.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortsBitmap  

nbsStackSlotUplStatus 1.3.6.1.4.1.629.1.50.4.6.1.9
Current status of the Uplink Module
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

nbsStackSlotUplHwDescr 1.3.6.1.4.1.629.1.50.4.6.1.10
A description of the Hardware Version of the Uplink Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nbsStackSlotUplSwDescr 1.3.6.1.4.1.629.1.50.4.6.1.11
A description of the Software Version of the Uplink Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nbsStackSpecSlotTable 1.3.6.1.4.1.629.1.50.4.7
Table of descriptive and status information about the Special Slots.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NbsStackSpecSlotEntry

nbsStackSpecSlotEntry 1.3.6.1.4.1.629.1.50.4.7.1
An entry in the table, containing information about a single Special Slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NbsStackSpecSlotEntry  

nbsStackSlotSpecNumber 1.3.6.1.4.1.629.1.50.4.7.1.1
The Special Slot # in the Device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotSpecUplNumber 1.3.6.1.4.1.629.1.50.4.7.1.2
The Uplink Module # in the corresponding Special Slot in the Device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nbsStackSlotSpecUplRedundantMode 1.3.6.1.4.1.629.1.50.4.7.1.3
Special Slot Additional Status: other=(1) - unknown Status or Module is not Valid; specialRedundant=(2) - Both connectors of the GigaBit Redundant Module are connected to the same 2 connectors of the other GigaBit Redundant Module. Module provides automatic quick Redundancy; autoRedundant=(3) - Each connector of the GigaBit Redundant Module is connected to the Single GigaBit Ethernet Module. Module provides automatic quick Redundancy; manualLeftRedundant =(4), manualRightRedundant=(5) - Each connector of the GigaBit Redundant Module is connected to the Single GigaBit Ethernet Module. Module will force the Link in its Left Connector as a primary Link, in case of (4). Module will force the Link in its Right Connector as a primary Link, in case of (5)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), specialRedundant(2), autoRedundant(3), manualLeftRedundant(4), manualRightRedundant(5)  

nbsStackSlotSpecUplLeftLinkLed 1.3.6.1.4.1.629.1.50.4.7.1.4
Rx Activity ower Left Connector in the Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

nbsStackSlotSpecUplLeftActivityLed 1.3.6.1.4.1.629.1.50.4.7.1.5
Tx Activity ower Left Connector in the Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

nbsStackSlotSpecUplRightLinkLed 1.3.6.1.4.1.629.1.50.4.7.1.6
Rx Activity ower Right Connector in the Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

nbsStackSlotSpecUplRightActivityLed 1.3.6.1.4.1.629.1.50.4.7.1.7
Tx Activity ower Right Connector in the Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor