NTN-QOS-POLICY-EVOL-PIB

File: NTN-QOS-POLICY-EVOL-PIB.mib (457082 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
SNMP-FRAMEWORK-MIB IF-MIB INET-ADDRESS-MIB
DIFFSERV-DSCP-TC DIFFSERV-MIB INTEGRATED-SERVICES-MIB
Q-BRIDGE-MIB SYNOPTICS-ROOT-MIB POLICY-FRAMEWORK-PIB
BN-IF-EXTENSIONS-MIB

Imported symbols

Unsigned32 MODULE-IDENTITY OBJECT-TYPE
Integer32 Counter64 OBJECT-IDENTITY
zeroDotZero NOTIFICATION-TYPE MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP RowStatus
StorageType TEXTUAL-CONVENTION RowPointer
TruthValue MacAddress AutonomousType
SnmpAdminString InterfaceIndex InterfaceIndexOrZero
InetAddressType InetAddress InetAddressPrefixLength
InetPortNumber InetAddressIPv4 Dscp
DscpOrAny IndexInteger IndexIntegerNextFree
BurstSize PortList VlanId
policy Role RoleCombination
bnIfExtnSlot bnIfExtnPort

Defined Types

IndexIntegerOrZero  
An integer which may be used as a table index. A value of zero indicates that no table index has been specified.
TEXTUAL-CONVENTION    
  Unsigned32 0..4294967295  

QosIeee802Cos  
An integer that is in the range of the IEEE 802 COS values. This corresponds to the 802.1p priority values.
TEXTUAL-CONVENTION    
  Integer32 0..7  

FlowIdOrAny  
The flow identifier in an IPv6 header that may be used to discriminate traffic flows. The value of -1 is used to indicate a wildcard, i.e., any value.
TEXTUAL-CONVENTION    
  Integer32 -1 | 0..1048575  

DscpUpdate  
The IP header Differentiated Services Code-Point that may be used for discriminating among traffic streams. The value -1 is used to indicate that the DSCP value should not be updated. The value 64 is used to indicate that the DSCP value should be updated using interface-specific (i.e., ingress interface) or Layer 2 (i.e., 802.1p user priority value) data to determine the appropriate DSCP value.
TEXTUAL-CONVENTION    
  Integer32 -1 | 0..63 | 64  

VersionIndicator  
A version indicator is used when different versions of a given table entry exist. The version itself specifies which attributes in an entry may be set to non-default values. Tables that include a version indicator attribute must indicate the versions to which each attribute is applicable.
TEXTUAL-CONVENTION    
  INTEGER version1(1), version2(2)  

FcId  
Represents a Fibre Channel address
TEXTUAL-CONVENTION    
  OCTET STRING Size(3)  

InterfaceList  
Each bit of this bit mask corresponds to an ifIndex value, with the most significant bit of the i-th octet of this octet string corresponding to the ((8*i) - 7)-th ifIndex, and the least significant bit of the i-th octet corresponding to the (8*i)-th ifIndex.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..128)  

NtnQosInterfaceTypeEntry  
SEQUENCE    
  ntnQosInterfaceTypeId IndexInteger
  ntnQosInterfaceTypeRoles RoleCombination
  ntnQosInterfaceTypeIfClass INTEGER
  ntnQosInterfaceTypeCapabilities BITS
  ntnQosInterfaceTypeStorageType StorageType
  ntnQosInterfaceTypeStatus RowStatus

NtnQosQsetPriAssignmentEntry  
SEQUENCE    
  ntnQosQsetPriAssignmentId IndexInteger
  ntnQosQsetPriAssignmentQset Integer32
  ntnQosQsetPriAssignmentPri QosIeee802Cos
  ntnQosQsetPriAssignmentQueue Integer32
  ntnQosQsetPriAssignmentStorageType StorageType
  ntnQosQsetPriAssignmentStatus RowStatus

NtnQosQsetDscpAssignmentEntry  
SEQUENCE    
  ntnQosQsetDscpAssignmentId IndexInteger
  ntnQosQsetDscpAssignmentQset Integer32
  ntnQosQsetDscpAssignmentDscp Dscp
  ntnQosQsetDscpAssignmentQueue Integer32
  ntnQosQsetDscpAssignmentStorageType StorageType
  ntnQosQsetDscpAssignmentStatus RowStatus

NtnQosShapingParamsEntry  
SEQUENCE    
  ntnQosShapingParamsId IndexInteger
  ntnQosShapingParamsRate Unsigned32
  ntnQosShapingParamsBurstSize Unsigned32
  ntnQosShapingParamsQueueSize INTEGER
  ntnQosShapingParamsStorageType StorageType
  ntnQosShapingParamsStatus RowStatus
  ntnQosShapingParamsLabel SnmpAdminString

NtnDsMultiFieldClfrEntry  
SEQUENCE    
  ntnDsMultiFieldClfrId IndexInteger
  ntnDsMultiFieldClfrAddrType InetAddressType
  ntnDsMultiFieldClfrDstAddr InetAddress
  ntnDsMultiFieldClfrDstPrefixLength InetAddressPrefixLength
  ntnDsMultiFieldClfrSrcAddr InetAddress
  ntnDsMultiFieldClfrSrcPrefixLength InetAddressPrefixLength
  ntnDsMultiFieldClfrDscp DscpOrAny
  ntnDsMultiFieldClfrFlowId FlowIdOrAny
  ntnDsMultiFieldClfrProtocol Unsigned32
  ntnDsMultiFieldClfrDstL4PortMin InetPortNumber
  ntnDsMultiFieldClfrDstL4PortMax InetPortNumber
  ntnDsMultiFieldClfrSrcL4PortMin InetPortNumber
  ntnDsMultiFieldClfrSrcL4PortMax InetPortNumber
  ntnDsMultiFieldClfrStorage StorageType
  ntnDsMultiFieldClfrStatus RowStatus
  ntnDsMultiFieldClfrLabel SnmpAdminString
  ntnDsMultiFieldClfrSessionId Unsigned32
  ntnDsMultiFieldClfrVersion VersionIndicator
  ntnDsMultiFieldClfrIpFlags BITS
  ntnDsMultiFieldClfrTcpCtrlFlags BITS
  ntnDsMultiFieldClfrIpv4Options INTEGER

NtnL2MultiFieldClfrEntry  
SEQUENCE    
  ntnL2MultiFieldClfrId IndexInteger
  ntnL2MultiFieldClfrDstAddr MacAddress
  ntnL2MultiFieldClfrDstAddrMask MacAddress
  ntnL2MultiFieldClfrSrcAddr MacAddress
  ntnL2MultiFieldClfrSrcAddrMask MacAddress
  ntnL2MultiFieldClfrVlanIdMin Integer32
  ntnL2MultiFieldClfrVlanIdMax Integer32
  ntnL2MultiFieldClfrVlanTag INTEGER
  ntnL2MultiFieldClfrEtherType Integer32
  ntnL2MultiFieldClfrUserPriority INTEGER
  ntnL2MultiFieldClfrStorage StorageType
  ntnL2MultiFieldClfrStatus RowStatus
  ntnL2MultiFieldClfrLabel SnmpAdminString
  ntnL2MultiFieldClfrSessionId Unsigned32
  ntnL2MultiFieldClfrVersion VersionIndicator
  ntnL2MultiFieldClfrPktType INTEGER
  ntnL2MultiFieldClfrIvidMin Integer32
  ntnL2MultiFieldClfrIvidMax Integer32
  ntnL2MultiFieldClfrTPID Integer32
  ntnL2MultiFieldClfrCFI INTEGER
  ntnL2MultiFieldClfrITPID Integer32
  ntnL2MultiFieldClfrICFI INTEGER
  ntnL2MultiFieldClfrIUserPriority INTEGER

NtnSystemClfrEntry  
SEQUENCE    
  ntnSystemClfrId IndexInteger
  ntnSystemClfrUnknownUcastFrames TruthValue
  ntnSystemClfrUnknownMcastFrames TruthValue
  ntnSystemClfrKnownUcastFrames TruthValue
  ntnSystemClfrKnownMcastFrames TruthValue
  ntnSystemClfrBcastFrames TruthValue
  ntnSystemClfrPatternPosition OCTET STRING
  ntnSystemClfrPatternData OCTET STRING
  ntnSystemClfrStorage StorageType
  ntnSystemClfrStatus RowStatus
  ntnSystemClfrPatternFormat INTEGER
  ntnSystemClfrLabel SnmpAdminString
  ntnSystemClfrSessionId Unsigned32
  ntnSystemClfrVersion VersionIndicator
  ntnSystemClfrUnknownIpMcast TruthValue
  ntnSystemClfrKnownIpMcast TruthValue
  ntnSystemClfrNonIpPkt TruthValue
  ntnSystemClfrPatternIpVersion INTEGER
  ntnSystemClfrUnknownNonIpMcast TruthValue
  ntnSystemClfrKnownNonIpMcast TruthValue
  ntnSystemClfrPatternL2Format INTEGER

NtnClfrComponentEntry  
SEQUENCE    
  ntnClfrComponentId IndexInteger
  ntnClfrComponentSpecific RowPointer
  ntnClfrComponentSetId Unsigned32
  ntnClfrComponentLabel SnmpAdminString
  ntnClfrComponentStorage StorageType
  ntnClfrComponentStatus RowStatus
  ntnClfrComponentSessionId Unsigned32
  ntnClfrComponentVersion VersionIndicator

NtnClfrBlockEntry  
SEQUENCE    
  ntnClfrBlockId IndexInteger
  ntnClfrBlockNumber Unsigned32
  ntnClfrBlockClfrCompSetId Unsigned32
  ntnClfrBlockMeter IndexIntegerOrZero
  ntnClfrBlockAction IndexIntegerOrZero
  ntnClfrBlockLabel SnmpAdminString
  ntnClfrBlockStorage StorageType
  ntnClfrBlockStatus RowStatus
  ntnClfrBlockSessionId Unsigned32
  ntnClfrBlockVersion VersionIndicator
  ntnClfrBlockPrecedence Unsigned32

NtnQosMeterEntry  
SEQUENCE    
  ntnQosMeterId IndexInteger
  ntnQosMeterSucceedNext RowPointer
  ntnQosMeterFailNext RowPointer
  ntnQosMeterSpecific RowPointer
  ntnQosMeterOutOfProfileStats IndexIntegerOrZero
  ntnQosMeterLabel SnmpAdminString
  ntnQosMeterStorage StorageType
  ntnQosMeterStatus RowStatus
  ntnQosMeterSessionId Unsigned32
  ntnQosMeterVersion VersionIndicator

NtnQosTBParamEntry  
SEQUENCE    
  ntnQosTBParamId IndexInteger
  ntnQosTBParamType AutonomousType
  ntnQosTBParamRate Unsigned32
  ntnQosTBParamBurstSize BurstSize
  ntnQosTBParamInterval Unsigned32
  ntnQosTBParamLabel SnmpAdminString
  ntnQosTBParamStorage StorageType
  ntnQosTBParamStatus RowStatus
  ntnQosTBParamSessionId Unsigned32
  ntnQosTBParamVersion VersionIndicator
  ntnQosTBParamMinRate Unsigned32

NtnQosBaseActionEntry  
SEQUENCE    
  ntnQosBaseActionId IndexInteger
  ntnQosBaseActionDrop INTEGER
  ntnQosBaseActionUpdateDscp DscpUpdate
  ntnQosBaseActionUpdateUserPriority INTEGER
  ntnQosBaseActionSetDropPrecedence INTEGER
  ntnQosBaseActionCopyToCpu TruthValue
  ntnQosBaseActionMirrorFrame TruthValue
  ntnQosBaseActionExtension RowPointer
  ntnQosBaseActionLabel SnmpAdminString
  ntnQosBaseActionStorage StorageType
  ntnQosBaseActionStatus RowStatus
  ntnQosBaseActionSessionId Unsigned32

NtnQosIfcActionEntry  
SEQUENCE    
  ntnQosIfcActionId IndexInteger
  ntnQosIfcActionUpdateVlanId Integer32
  ntnQosIfcActionSetEgressMask OCTET STRING
  ntnQosIfcActionSetEgressUcastIfc InterfaceIndexOrZero
  ntnQosIfcActionSetEgressNUcastIfc InterfaceIndexOrZero
  ntnQosIfcActionExtension RowPointer
  ntnQosIfcActionLabel SnmpAdminString
  ntnQosIfcActionStorage StorageType
  ntnQosIfcActionStatus RowStatus
  ntnQosIfcActionSessionId Unsigned32

NtnQosPolicyEntry  
SEQUENCE    
  ntnQosPolicyId IndexInteger
  ntnQosPolicyClassifierType INTEGER
  ntnQosPolicyClassifierId Unsigned32
  ntnQosPolicyInterfaceRoles RoleCombination
  ntnQosPolicyPrecedence Unsigned32
  ntnQosPolicyMeter IndexIntegerOrZero
  ntnQosPolicyAction IndexIntegerOrZero
  ntnQosPolicyNonMatchAction IndexIntegerOrZero
  ntnQosPolicyLabel SnmpAdminString
  ntnQosPolicyStorage StorageType
  ntnQosPolicyStatus RowStatus
  ntnQosPolicyStats IndexIntegerOrZero
  ntnQosPolicyStatsType INTEGER
  ntnQosPolicyInterfaceIndex InterfaceIndexOrZero
  ntnQosPolicySessionId Unsigned32
  ntnQosPolicyVersion VersionIndicator
  ntnQosPolicyMeteringMode INTEGER

NtnQosCountActEntry  
SEQUENCE    
  ntnQosCountActId IndexInteger
  ntnQosCountActOctets Counter64
  ntnQosCountActPkts Counter64
  ntnQosCountActStorage StorageType
  ntnQosCountActStatus RowStatus
  ntnQosCountActSessionId Unsigned32

NtnQosFilterStatsEntry  
SEQUENCE    
  ntnQosFilterStatsPolicyId IndexInteger
  ntnQosFilterStatsFilterId IndexIntegerOrZero
  ntnQosFilterStatsInterfaceId InterfaceIndex
  ntnQosFilterStatsInProfileOctets Counter64
  ntnQosFilterStatsInProfilePkts Counter64
  ntnQosFilterStatsOutOfProfileOctets Counter64
  ntnQosFilterStatsOutOfProfilePkts Counter64
  ntnQosFilterStatsStorage StorageType
  ntnQosFilterStatsStatus RowStatus

NtnQosPolicyDiagsEntry  
SEQUENCE    
  ntnQosPolicyDiagsMasksConsumed Unsigned32
  ntnQosPolicyDiagsFiltersConsumed Unsigned32
  ntnQosPolicyDiagsMetersConsumed Unsigned32
  ntnQosPolicyDiagsNonQosMasksConsumed Unsigned32
  ntnQosPolicyDiagsNonQosFiltersConsumed Unsigned32
  ntnQosPolicyDiagsNonQosMetersConsumed Unsigned32
  ntnQosPolicyDiagsCountersConsumed Unsigned32
  ntnQosPolicyDiagsTotalMasksAvail Unsigned32
  ntnQosPolicyDiagsTotalFiltersAvail Unsigned32
  ntnQosPolicyDiagsTotalMetersAvail Unsigned32
  ntnQosPolicyDiagsTotalCountersAvail Unsigned32

NtnQosPolicyPrecResDiagsEntry  
SEQUENCE    
  ntnQosPolicyPrecResDiagsPrec Unsigned32
  ntnQosPolicyPrecResDiagsInterface InterfaceIndex
  ntnQosPolicyPrecResDiagsKeysConsumed Unsigned32
  ntnQosPolicyPrecResDiagsFiltersConsumed Unsigned32
  ntnQosPolicyPrecResDiagsMetersConsumed Unsigned32
  ntnQosPolicyPrecResDiagsNonQosKeysConsumed Unsigned32
  ntnQosPolicyPrecResDiagsNonQosFiltersConsumed Unsigned32
  ntnQosPolicyPrecResDiagsNonQosMetersConsumed Unsigned32
  ntnQosPolicyPrecResDiagsCountersConsumed Unsigned32
  ntnQosPolicyPrecResDiagsTotalKeysAvail Unsigned32
  ntnQosPolicyPrecResDiagsTotalFiltersAvail Unsigned32
  ntnQosPolicyPrecResDiagsTotalMetersAvail Unsigned32
  ntnQosPolicyPrecResDiagsTotalCountersAvail Unsigned32
  ntnQosPolicyPrecResDiagsRangeChkElemsConsumed Unsigned32
  ntnQosPolicyPrecResDiagsApplicationIdUsed Unsigned32
  ntnQosPolicyPrecResDiagsApplicationNameUsed SnmpAdminString
  ntnQosPolicyPrecResDiagsRangeChkElemsAvail Unsigned32

NtnQosIfAssignmentEntry  
SEQUENCE    
  ntnQosIfAssignmentIfIndex InterfaceIndex
  ntnQosIfAssignmentRoleCombination RoleCombination
  ntnQosIfAssignmentQueueSet Integer32
  ntnQosIfAssignmentStorage StorageType
  ntnQosIfAssignmentStatus RowStatus
  ntnQosIfAssignmentCapabilities BITS

NtnQosIfQueueEntry  
SEQUENCE    
  ntnQosIfQueueId IndexInteger
  ntnQosIfQueueSetId Integer32
  ntnQosIfQueueIndex Integer32
  ntnQosIfQueueDiscipline INTEGER
  ntnQosIfQueueDrainSize Unsigned32
  ntnQosIfQueueAbsBandwidth Unsigned32
  ntnQosIfQueueBandwidthAllocation INTEGER
  ntnQosIfQueueServiceOrder Integer32
  ntnQosIfQueueSize Unsigned32
  ntnQosIfQueueStorage StorageType
  ntnQosIfQueueStatus RowStatus

NtnQosInterfaceRoleEntry  
SEQUENCE    
  ntnQosInterfaceRoleId IndexInteger
  ntnQosInterfaceRoleRole Role
  ntnQosInterfaceRoleIfClass INTEGER
  ntnQosInterfaceRoleCapabilities BITS
  ntnQosInterfaceRoleStorageType StorageType
  ntnQosInterfaceRoleStatus RowStatus
  ntnQosInterfaceRoleStatsTrackingType INTEGER

NtnQosUserRoleEntry  
SEQUENCE    
  ntnQosUserRoleIfIndex InterfaceIndex
  ntnQosUserRoleRoleCombination RoleCombination
  ntnQosUserRoleUserName SnmpAdminString
  ntnQosUserRoleUserGroup SnmpAdminString
  ntnQosUserRoleSessionId Unsigned32
  ntnQosUserRoleSessionStart Unsigned32
  ntnQosUserRoleSessionGroup Unsigned32
  ntnQosUserRoleStorage StorageType
  ntnQosUserRoleStatus RowStatus

NtnQosIfShapingEntry  
SEQUENCE    
  ntnQosIfShapingIfIndex InterfaceIndex
  ntnQosIfShapingSpecific RowPointer
  ntnQosIfShapingLabel SnmpAdminString
  ntnQosIfShapingStorage StorageType
  ntnQosIfShapingStatus RowStatus

NtnQosCosShapingEntry  
SEQUENCE    
  ntnQosCosShapingIfIndex InterfaceIndex
  ntnQosCosShapingCos QosIeee802Cos
  ntnQosCosShapingSpecific RowPointer
  ntnQosCosShapingLabel SnmpAdminString
  ntnQosCosShapingStorage StorageType
  ntnQosCosShapingStatus RowStatus

NtnQosQueueShapingEntry  
SEQUENCE    
  ntnQosQueueShapingIfIndex InterfaceIndex
  ntnQosQueueShapingQueue Integer32
  ntnQosQueueShapingSpecific RowPointer
  ntnQosQueueShapingLabel SnmpAdminString
  ntnQosQueueShapingStorage StorageType
  ntnQosQueueShapingStatus RowStatus

NtnQosDscpToCosEntry  
SEQUENCE    
  ntnQosDscpToCosId IndexInteger
  ntnQosDscpToCosDscp Dscp
  ntnQosDscpToCosCos QosIeee802Cos
  ntnQosDscpToCosDropPrec INTEGER
  ntnQosDscpToCosLabel SnmpAdminString
  ntnQosDscpToCosStorage StorageType
  ntnQosDscpToCosStatus RowStatus
  ntnQosDscpToCosNewDscp Dscp

NtnQosCosToDscpEntry  
SEQUENCE    
  ntnQosCosToDscpId IndexInteger
  ntnQosCosToDscpCos QosIeee802Cos
  ntnQosCosToDscpDscp Dscp
  ntnQosCosToDscpLabel SnmpAdminString
  ntnQosCosToDscpStorage StorageType
  ntnQosCosToDscpStatus RowStatus

NtnQosPrcSupportEntry  
SEQUENCE    
  ntnQosPrcSupportId IndexInteger
  ntnQosPrcSupportSupportedPrc OBJECT IDENTIFIER
  ntnQosPrcSupportSupportedAttrs OCTET STRING
  ntnQosPrcSupportMaxPris Unsigned32
  ntnQosPrcSupportCurrentPris Unsigned32

NtnQosPolicyDeviceIdentEntry  
SEQUENCE    
  ntnQosPolicyDeviceIdentId IndexInteger
  ntnQosPolicyDeviceIdentDescr SnmpAdminString
  ntnQosPolicyDeviceIdentMaxMsg Unsigned32

NtnQosDsAccessElemEntry  
SEQUENCE    
  ntnQosDsAccessElemId IndexInteger
  ntnQosDsAccessElemAddrType InetAddressType
  ntnQosDsAccessElemDstAddr InetAddress
  ntnQosDsAccessElemDstPrefixLength InetAddressPrefixLength
  ntnQosDsAccessElemSrcAddr InetAddress
  ntnQosDsAccessElemSrcPrefixLength InetAddressPrefixLength
  ntnQosDsAccessElemDscp DscpOrAny
  ntnQosDsAccessElemFlowId FlowIdOrAny
  ntnQosDsAccessElemProtocol Unsigned32
  ntnQosDsAccessElemDstL4PortMin InetPortNumber
  ntnQosDsAccessElemDstL4PortMax InetPortNumber
  ntnQosDsAccessElemSrcL4PortMin InetPortNumber
  ntnQosDsAccessElemSrcL4PortMax InetPortNumber
  ntnQosDsAccessElemActionDrop INTEGER
  ntnQosDsAccessElemActionRemarkDscp Integer32
  ntnQosDsAccessElemActionRemarkCos INTEGER
  ntnQosDsAccessElemActionSetPrec INTEGER
  ntnQosDsAccessElemName SnmpAdminString
  ntnQosDsAccessElemBlock SnmpAdminString
  ntnQosDsAccessElemType INTEGER
  ntnQosDsAccessElemStorage StorageType
  ntnQosDsAccessElemStatus RowStatus
  ntnQosDsAccessElemEvalPrec Unsigned32

NtnQosL2AccessElemEntry  
SEQUENCE    
  ntnQosL2AccessElemId IndexInteger
  ntnQosL2AccessElemDstAddr MacAddress
  ntnQosL2AccessElemDstAddrMask MacAddress
  ntnQosL2AccessElemSrcAddr MacAddress
  ntnQosL2AccessElemSrcAddrMask MacAddress
  ntnQosL2AccessElemVlanIdMin Integer32
  ntnQosL2AccessElemVlanIdMax Integer32
  ntnQosL2AccessElemVlanTag INTEGER
  ntnQosL2AccessElemEtherType Integer32
  ntnQosL2AccessElemUserPriority INTEGER
  ntnQosL2AccessElemActionDrop INTEGER
  ntnQosL2AccessElemActionRemarkDscp Integer32
  ntnQosL2AccessElemActionRemarkCos INTEGER
  ntnQosL2AccessElemActionSetPrec INTEGER
  ntnQosL2AccessElemName SnmpAdminString
  ntnQosL2AccessElemBlock SnmpAdminString
  ntnQosL2AccessElemType INTEGER
  ntnQosL2AccessElemStorage StorageType
  ntnQosL2AccessElemStatus RowStatus
  ntnQosL2AccessElemEvalPrec Unsigned32

NtnQosAccessAsgnEntry  
SEQUENCE    
  ntnQosAccessAsgnId IndexInteger
  ntnQosAccessAsgnAclType INTEGER
  ntnQosAccessAsgnName SnmpAdminString
  ntnQosAccessAsgnIfIndex InterfaceIndexOrZero
  ntnQosAccessAsgnRate Unsigned32
  ntnQosAccessAsgnBurstSize BurstSize
  ntnQosAccessAsgnOutActionDrop INTEGER
  ntnQosAccessAsgnOutActionRemarkDscp Integer32
  ntnQosAccessAsgnOutActionRemarkCos INTEGER
  ntnQosAccessAsgnOutActionSetPrec INTEGER
  ntnQosAccessAsgnStatsType INTEGER
  ntnQosAccessAsgnStorage StorageType
  ntnQosAccessAsgnStatus RowStatus
  ntnQosAccessAsgnNonMatchActionDrop INTEGER
  ntnQosAccessAsgnMeterType AutonomousType
  ntnQosAccessAsgnSecondaryRate Unsigned32
  ntnQosAccessAsgnSecondaryBurstSize BurstSize
  ntnQosAccessAsgnYelActionDrop INTEGER
  ntnQosAccessAsgnYelActionRemarkDscp Integer32
  ntnQosAccessAsgnYelActionRemarkCos INTEGER
  ntnQosAccessAsgnYelActionSetPrec INTEGER
  ntnQosAccessAsgnSetPriority Unsigned32
  ntnQosAccessAsgnMeteringMode INTEGER

NtnQosIfAppsEntry  
SEQUENCE    
  ntnQosIfAppsIfIndex InterfaceIndex
  ntnQosIfAppsAppEnable BITS
  ntnQosIfAppsDefaultGateway InetAddressIPv4
  ntnQosIfAppsIfType INTEGER
  ntnQosIfAppsDHCPServer InetAddressIPv4
  ntnQosIfAppsStorage StorageType
  ntnQosIfAppsStatus RowStatus

NtnQosUserPolicyEntry  
SEQUENCE    
  ntnQosUserPolicyId IndexInteger
  ntnQosUserPolicyIfIndex InterfaceIndex
  ntnQosUserPolicyRoleCombination RoleCombination
  ntnQosUserPolicyUserName SnmpAdminString
  ntnQosUserPolicyUserGroup SnmpAdminString
  ntnQosUserPolicySessionId Unsigned32
  ntnQosUserPolicySessionStart Unsigned32
  ntnQosUserPolicySessionGroup Unsigned32
  ntnQosUserPolicyStorage StorageType
  ntnQosUserPolicyStatus RowStatus
  ntnQosUserPolicySrcMacAddr MacAddress
  ntnQosUserPolicySrcMacAddrMask MacAddress

NtnQosDsL2AccessElemEntry  
SEQUENCE    
  ntnQosDsL2AccessElemId IndexInteger
  ntnQosDsL2AccessElemAddrType InetAddressType
  ntnQosDsL2AccessElemDstIpAddr InetAddress
  ntnQosDsL2AccessElemDstIpPrefixLength InetAddressPrefixLength
  ntnQosDsL2AccessElemSrcIpAddr InetAddress
  ntnQosDsL2AccessElemSrcIpPrefixLength InetAddressPrefixLength
  ntnQosDsL2AccessElemDscp DscpOrAny
  ntnQosDsL2AccessElemFlowId FlowIdOrAny
  ntnQosDsL2AccessElemProtocol Unsigned32
  ntnQosDsL2AccessElemDstL4PortMin InetPortNumber
  ntnQosDsL2AccessElemDstL4PortMax InetPortNumber
  ntnQosDsL2AccessElemSrcL4PortMin InetPortNumber
  ntnQosDsL2AccessElemSrcL4PortMax InetPortNumber
  ntnQosDsL2AccessElemDstMacAddr MacAddress
  ntnQosDsL2AccessElemDstMacAddrMask MacAddress
  ntnQosDsL2AccessElemSrcMacAddr MacAddress
  ntnQosDsL2AccessElemSrcMacAddrMask MacAddress
  ntnQosDsL2AccessElemVlanIdMin Integer32
  ntnQosDsL2AccessElemVlanIdMax Integer32
  ntnQosDsL2AccessElemVlanTag INTEGER
  ntnQosDsL2AccessElemEtherType Integer32
  ntnQosDsL2AccessElemUserPriority INTEGER
  ntnQosDsL2AccessElemActionDrop INTEGER
  ntnQosDsL2AccessElemActionRemarkDscp Integer32
  ntnQosDsL2AccessElemActionRemarkCos INTEGER
  ntnQosDsL2AccessElemActionSetPrec INTEGER
  ntnQosDsL2AccessElemName SnmpAdminString
  ntnQosDsL2AccessElemBlock SnmpAdminString
  ntnQosDsL2AccessElemType INTEGER
  ntnQosDsL2AccessElemStorage StorageType
  ntnQosDsL2AccessElemStatus RowStatus
  ntnQosDsL2AccessElemEvalPrec Unsigned32
  ntnQosDsL2AccessElemIpFlags BITS
  ntnQosDsL2AccessElemTcpCtrlFlags BITS
  ntnQosDsL2AccessElemIpv4Options INTEGER
  ntnQosDsL2AccessElemPktType INTEGER
  ntnQosDsL2AccessElemIvidMin Integer32
  ntnQosDsL2AccessElemIvidMax Integer32
  ntnQosDsL2AccessElemUnknownUcastFrames TruthValue
  ntnQosDsL2AccessElemUnknownMcastFrames TruthValue
  ntnQosDsL2AccessElemKnownUcastFrames TruthValue
  ntnQosDsL2AccessElemKnownMcastFrames TruthValue
  ntnQosDsL2AccessElemBcastFrames TruthValue
  ntnQosDsL2AccessElemUnknownIpMcast TruthValue
  ntnQosDsL2AccessElemKnownIpMcast TruthValue
  ntnQosDsL2AccessElemNonIpPkt TruthValue
  ntnQosDsL2AccessElemVersion VersionIndicator
  ntnQosDsL2AccessElemUnknownNonIpMcast TruthValue
  ntnQosDsL2AccessElemKnownNonIpMcast TruthValue
  ntnQosDsL2AccessElemMasterBlockMember TruthValue
  ntnQosDsL2AccessElemMeterType INTEGER
  ntnQosDsL2AccessElemRate Unsigned32
  ntnQosDsL2AccessElemBurstSize BurstSize
  ntnQosDsL2AccessElemOutActionDrop INTEGER
  ntnQosDsL2AccessElemOutActionRemarkDscp Integer32
  ntnQosDsL2AccessElemOutActionRemarkCos INTEGER
  ntnQosDsL2AccessElemOutActionSetPrec INTEGER
  ntnQosDsL2AccessElemSecondaryRate Unsigned32
  ntnQosDsL2AccessElemSecondaryBurstSize BurstSize
  ntnQosDsL2AccessElemYelActionDrop INTEGER
  ntnQosDsL2AccessElemYelActionRemarkDscp Integer32
  ntnQosDsL2AccessElemYelActionRemarkCos INTEGER
  ntnQosDsL2AccessElemYelActionSetPrec INTEGER

NtnQosFilterSetStatsEntry  
SEQUENCE    
  ntnQosFilterSetStatsAccessAsgnId IndexInteger
  ntnQosFilterSetStatsPrecedence IndexInteger
  ntnQosFilterSetStatsEvalOrder IndexInteger
  ntnQosFilterSetStatsInProfileOctets Counter64
  ntnQosFilterSetStatsInProfilePkts Counter64
  ntnQosFilterSetStatsOutOfProfileOctets Counter64
  ntnQosFilterSetStatsOutOfProfilePkts Counter64
  ntnQosFilterSetStatsAccessElemId Integer32
  ntnQosFilterSetStatsStorage StorageType
  ntnQosFilterSetStatsStatus RowStatus

AvFcoeRedirEntry  
SEQUENCE    
  avFcoeRedirId IndexInteger
  avFcoeRedirDstId FcId
  avFcoeRedirIngressInterfaceList InterfaceList
  avFcoeRedirVlanIdMin Integer32
  avFcoeRedirVlanIdMax Integer32
  avFcoeRedirUserPriority INTEGER
  avFcoeRedirEtherType Integer32
  avFcoeRedirSrcId FcId
  avFcoeRedirActionUpdateDstMac MacAddress
  avFcoeRedirActionUpdateSrcMac MacAddress
  avFcoeRedirActionEgressInterface InterfaceIndexOrZero
  avFcoeRedirName SnmpAdminString
  avFcoeRedirStorage StorageType
  avFcoeRedirStatus RowStatus
  avFcoeRedirProcessedFrames Counter64
  avFcoeRedirActionEgressTrunkId Integer32

NtnQosDEIEntry  
SEQUENCE    
  ntnQosDEIInterfaceId InterfaceIndex
  ntnQosDEIIngressColorFromDEI TruthValue
  ntnQosDEIEgressMarkDEI TruthValue

Defined Values

ntnQosPolicyEvolPib 1.3.6.1.4.1.45.4.7
An Avaya Network's management module containing data definitions related to QoS components and services supported by network devices.
MODULE-IDENTITY    

ntnQosPolicyEvolPibClasses 1.3.6.1.4.1.45.4.7.1
OBJECT IDENTIFIER    

ntnQosPolicyEvolPibConformance 1.3.6.1.4.1.45.4.7.2
OBJECT IDENTIFIER    

ntnQosPolicyEvolPibNotifications 1.3.6.1.4.1.45.4.7.3
OBJECT IDENTIFIER    

ntnQosInterfaceTypeTable 1.3.6.1.4.1.45.4.7.1.1
Interface type definitions. This class describes the types of interfaces that exist on the device. An interface type is denoted by its designated role identifier.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosInterfaceTypeEntry

ntnQosInterfaceTypeEntry 1.3.6.1.4.1.45.4.7.1.1.1
An instance of this class describes the characteristics of a type of an interface. Interface type characteristics include a role combination identifier, an interface class designation and a filter capabilities attribute. An instance is required for each different unique role combination identifier which represents the different interface types that are operational in the device at any given time. The PEP does not report which specific interfaces have which characteristics.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosInterfaceTypeEntry  

ntnQosInterfaceTypeId 1.3.6.1.4.1.45.4.7.1.1.1.1
An arbitrary integer index that uniquely identifies a instance of the ntnQosInterfaceType class. Class instances may not be contiguous.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosInterfaceTypeRoles 1.3.6.1.4.1.45.4.7.1.1.1.2
The role combination that is used to identify interfaces with the characteristics specified by the attributes of this class instance. Interface role combination identifiers are used within a number of classes to logically identify a physical set of interfaces to which policy rules and actions are applied. Role combination identifiers must exist in this table prior to being referenced in other class instances.
Status: current Access: read-create
OBJECT-TYPE    
  RoleCombination  

ntnQosInterfaceTypeIfClass 1.3.6.1.4.1.45.4.7.1.1.1.3
A value describing the overall classification of traffic received on interfaces with the given role combination. Traffic received on trusted interfaces may be processed differently and be subject to different restrictions that traffic received on non-trusted interfaces. The treatment of traffic based on interface class is implementation dependent.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER trusted(1), nonTrusted(2), unrestricted(3)  

ntnQosInterfaceTypeCapabilities 1.3.6.1.4.1.45.4.7.1.1.1.4
An enumeration of interface capabilities. Used by the PDP or network manager to select which policies and configuration it should push to the PEP.
Status: current Access: read-create
OBJECT-TYPE    
  BITS other(0), inputIpClassification(1), outputIpClassification(2), input802Classification(3), output802Classification(4)  

ntnQosInterfaceTypeStorageType 1.3.6.1.4.1.45.4.7.1.1.1.5
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosInterfaceTypeStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosInterfaceTypeStatus 1.3.6.1.4.1.45.4.7.1.1.1.6
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosQsetPriAssignmentTable 1.3.6.1.4.1.45.4.7.1.2
Supports the assignment of 802.1p user priority values to a queue for each interface with a specific queue set. There will be 8 instances of this class for each supported queue set.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosQsetPriAssignmentEntry

ntnQosQsetPriAssignmentEntry 1.3.6.1.4.1.45.4.7.1.2.1
An instance of the ntnQosQsetPriAssignment class.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosQsetPriAssignmentEntry  

ntnQosQsetPriAssignmentId 1.3.6.1.4.1.45.4.7.1.2.1.1
An index that is used to uniquely identify the instance of the ntnQosQsetPriAssignment class.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosQsetPriAssignmentQset 1.3.6.1.4.1.45.4.7.1.2.1.2
The queue set with which an interface must be configured to support the Pri-to-queue assignment described by this instance. The specified queue set must be defined in the ntnQosIfQueueTable prior to being referenced by this entry. Otherwise a 'priAssociationUnknown(3)' error code will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

ntnQosQsetPriAssignmentPri 1.3.6.1.4.1.45.4.7.1.2.1.3
The 802.1p user priority to which this class instance applies.
Status: current Access: read-create
OBJECT-TYPE    
  QosIeee802Cos  

ntnQosQsetPriAssignmentQueue 1.3.6.1.4.1.45.4.7.1.2.1.4
The specific queue, within the queue set that is associated with the interface set identified by the ntnQosQsetPriAssignmentRoles tag, on which traffic with the specified user priority, dictated by the ntnQosQsetPriAssignmentPri value, is placed. Failure to specify an appropriate queue results in a 'priAssociationConflict(4)' error indication being returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..255  

ntnQosQsetPriAssignmentStorageType 1.3.6.1.4.1.45.4.7.1.2.1.5
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosQsetPriAssignmentStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosQsetPriAssignmentStatus 1.3.6.1.4.1.45.4.7.1.2.1.6
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosQsetDscpAssignmentTable 1.3.6.1.4.1.45.4.7.1.3
Supports the assignment of DSCP values to a queue for each interface with a specific queue set. There will be 64 instances of this class for each supported queue set.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosQsetDscpAssignmentEntry

ntnQosQsetDscpAssignmentEntry 1.3.6.1.4.1.45.4.7.1.3.1
An instance of the ntnQosQsetDscpAssignment class.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosQsetDscpAssignmentEntry  

ntnQosQsetDscpAssignmentId 1.3.6.1.4.1.45.4.7.1.3.1.1
An index that is used to uniquely identify the instance of the ntnQosQsetDscpAssignment class.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosQsetDscpAssignmentQset 1.3.6.1.4.1.45.4.7.1.3.1.2
The queue set with which an interface must be configured to support the Dscp-to-queue assignment described by this instance. The specified queue set must be defined in the ntnQosIfQueueTable prior to being referenced by this entry. Otherwise a 'priAssociationUnknown(3)' error code will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

ntnQosQsetDscpAssignmentDscp 1.3.6.1.4.1.45.4.7.1.3.1.3
The DSCP value to which this class instance applies.
Status: current Access: read-create
OBJECT-TYPE    
  Dscp  

ntnQosQsetDscpAssignmentQueue 1.3.6.1.4.1.45.4.7.1.3.1.4
The specific queue, within the queue set that is associated with the interface set identified by the ntnQosQsetDscpAssignmentRoles tag, on which traffic with the specified user priority, dictated by the ntnQosQsetDscpAssignmentDscp value, is placed. Failure to specify an appropriate queue results in a 'priAssociationConflict(4)' error indication being returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..255  

ntnQosQsetDscpAssignmentStorageType 1.3.6.1.4.1.45.4.7.1.3.1.5
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosQsetDscpAssignmentStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosQsetDscpAssignmentStatus 1.3.6.1.4.1.45.4.7.1.3.1.6
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosShapingParamsTable 1.3.6.1.4.1.45.4.7.1.4
Supports the definition of shaping parameters that can be applied to individual flows. Shaping criteria is associated with a flow using the qosTargetShaper attribute of the qosTarget class.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosShapingParamsEntry

ntnQosShapingParamsEntry 1.3.6.1.4.1.45.4.7.1.4.1
An instance of the ntnQosShapingParams class.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosShapingParamsEntry  

ntnQosShapingParamsId 1.3.6.1.4.1.45.4.7.1.4.1.1
An index that is used to uniquely identify the instance of the ntnQosShapingParams class.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosShapingParamsRate 1.3.6.1.4.1.45.4.7.1.4.1.2
The maximum rate, in kilobits per second, at which traffic shaped using this rate criteria will be transmitted over a given period of time. Transmitted traffic may exceed this rate for short periods in accordance with the associated burst size. Typically, this value specifies the rate at which tokens are added to a token bucket used to shape flows. This object specifies a rate in kilobits per second units such that, for example, a value of 100 equates to a shaped flow being transmitted at a maximum rate of 100,000 bits per second.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..ffffffff  

ntnQosShapingParamsBurstSize 1.3.6.1.4.1.45.4.7.1.4.1.3
The maximum traffic burst size, in bytes, that can be transmitted without experiencing a shaping delay. Typically, this value represents the maximum number of tokens in a token bucket. Note that the value of this attribute may modified in an implementation dependent, such as being rounded down to an acceptable value, to account for system limitations.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnQosShapingParamsQueueSize 1.3.6.1.4.1.45.4.7.1.4.1.4
The amount of traffic, in packets, that may exceed the maximum burst size and still be queued for transmission. This value specifies the size of a shaping queue that holds a flow's traffic that is being delayed for shaping purposes. The specified enumeration dictates whether one ('onePkt'), two ('twoPkts'), four ('fourPkts'), eight, ('eightPkts') or sixteen ('sixteenPkts') packets can be held in the shaping queue prior to transmission.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER onePkt(1), twoPkts(2), fourPkts(3), eightPkts(4), sixteenPkts(5)  

ntnQosShapingParamsStorageType 1.3.6.1.4.1.45.4.7.1.4.1.5
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosQsetDscpAssignmentStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosShapingParamsStatus 1.3.6.1.4.1.45.4.7.1.4.1.6
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosShapingParamsLabel 1.3.6.1.4.1.45.4.7.1.4.1.7
A label used to reference the entry in a textual manner.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnClassifierClasses 1.3.6.1.4.1.45.4.7.1.5
OBJECT IDENTIFIER    

ntnDsMultiFieldClfrNextFree 1.3.6.1.4.1.45.4.7.1.5.1
This object contains an unused value for ntnDsMultiFieldClfrId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnDsMultiFieldClfrTable 1.3.6.1.4.1.45.4.7.1.5.2
A table of IP Multi-Field Classifier filter entries that a system may use to identify IP traffic.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnDsMultiFieldClfrEntry

ntnDsMultiFieldClfrEntry 1.3.6.1.4.1.45.4.7.1.5.2.1
An IP Multi-Field Classifier entry describes a single filter.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnDsMultiFieldClfrEntry  

ntnDsMultiFieldClfrId 1.3.6.1.4.1.45.4.7.1.5.2.1.1
An index that enumerates the Multi-Field Classifier filter entries. Managers obtain new values for row creation in this table by reading ntnDsMultiFieldClfrNextFree. Version 1/2 attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnDsMultiFieldClfrAddrType 1.3.6.1.4.1.45.4.7.1.5.2.1.2
The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can only look at packets on the wire. Therefore, this object is limited to IPv4 and IPv6 addresses, with the exception of releases that support the logging of martian packets. Instead of IPv4z and IPv6z, the martian variants of IPv4 and IPv6 are used. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

ntnDsMultiFieldClfrDstAddr 1.3.6.1.4.1.45.4.7.1.5.2.1.3
The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnDsMultiFieldClfrDstPrefixLength indicates the number of bits that are relevant. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

ntnDsMultiFieldClfrDstPrefixLength 1.3.6.1.4.1.45.4.7.1.5.2.1.4
The length of the CIDR Prefix carried in ntnDsMultiFieldClfrDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength  

ntnDsMultiFieldClfrSrcAddr 1.3.6.1.4.1.45.4.7.1.5.2.1.5
The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnDsMultiFieldClfrSrcPrefixLength indicates the number of bits that are relevant. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

ntnDsMultiFieldClfrSrcPrefixLength 1.3.6.1.4.1.45.4.7.1.5.2.1.6
The length of the CIDR Prefix carried in ntnDsMultiFieldClfrSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength  

ntnDsMultiFieldClfrDscp 1.3.6.1.4.1.45.4.7.1.5.2.1.7
The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP values are considered a match. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  DscpOrAny  

ntnDsMultiFieldClfrFlowId 1.3.6.1.4.1.45.4.7.1.5.2.1.8
The flow identifier in an IPv6 header. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  FlowIdOrAny  

ntnDsMultiFieldClfrProtocol 1.3.6.1.4.1.45.4.7.1.5.2.1.9
The IP protocol to match against the IPv4 protocol number or the IPv6 Next-Header number in the packet. A value of 255 means match all. Note the protocol number of 255 is reserved by IANA, and Next-Header number of 0 is used in IPv6. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

ntnDsMultiFieldClfrDstL4PortMin 1.3.6.1.4.1.45.4.7.1.5.2.1.10
The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

ntnDsMultiFieldClfrDstL4PortMax 1.3.6.1.4.1.45.4.7.1.5.2.1.11
The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in ntnDsMultiFieldClfrDstL4PortMin. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

ntnDsMultiFieldClfrSrcL4PortMin 1.3.6.1.4.1.45.4.7.1.5.2.1.12
The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

ntnDsMultiFieldClfrSrcL4PortMax 1.3.6.1.4.1.45.4.7.1.5.2.1.13
The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in ntnDsMultiFieldClfrSrcL4PortMin. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

ntnDsMultiFieldClfrStorage 1.3.6.1.4.1.45.4.7.1.5.2.1.14
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnDsMultiFieldClfrStatus 1.3.6.1.4.1.45.4.7.1.5.2.1.15
The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnDsMultiFieldClfrLabel 1.3.6.1.4.1.45.4.7.1.5.2.1.16
A label used to reference the classifier entry in a textual manner. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnDsMultiFieldClfrSessionId 1.3.6.1.4.1.45.4.7.1.5.2.1.17
A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnDsMultiFieldClfrVersion 1.3.6.1.4.1.45.4.7.1.5.2.1.18
Version indicator for ntnDsMultiFieldClfrTable.
Status: current Access: read-create
OBJECT-TYPE    
  VersionIndicator  

ntnDsMultiFieldClfrIpFlags 1.3.6.1.4.1.45.4.7.1.5.2.1.19
Represents the flags present in an IPv4 header. If a bit that is associated with a specific IP flag is set in this attribute, IPv4 packets with the specified flag set in the header will match this classifier. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  BITS ipv4MfFlagSet(0), ipv4DfFlagSet(1)  

ntnDsMultiFieldClfrTcpCtrlFlags 1.3.6.1.4.1.45.4.7.1.5.2.1.20
Represents the control flags (code bits) present in an TCP header. If a bit that is associated with a specific TCP control flag is set in this attribute, TCP packets with the specified flag set in the header will match this classifier. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  BITS tcpUrgFlagSet(0), tcpAckFlagSet(1), tcpPshFlagSet(2), tcpRstFlagSet(3), tcpSynFlagSet(4), tcpFinFlagSet(5)  

ntnDsMultiFieldClfrIpv4Options 1.3.6.1.4.1.45.4.7.1.5.2.1.21
This object indicates whether the presence, or lack thereof, of IPv4 options in an IPv4 packet should should be considered when looking for a match for this classifier entry. A value of 'ipv4OptionsPresent(1)' indicates that only IPv4 packets with options will match this classifier element. A value of 'ipv4OptionsNotPresent(2)' means that only IPv4 packets without options will be considered a match. A value of 'ignore(3)' means that the presence, or lack thereof, of IPv4 options in the received packet will not be considered when determining whether a packet matches this classifier entry. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipv4OptionsPresent(1), ipv4OptionsNotPresent(2), ignore(3)  

ntnL2MultiFieldClfrNextFree 1.3.6.1.4.1.45.4.7.1.5.3
This object contains an unused value for ntnL2MultiFieldClfrId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnL2MultiFieldClfrTable 1.3.6.1.4.1.45.4.7.1.5.4
IEEE 802-based classifier definitions. A class that contains attributes of IEEE 802 (e.g., 802.3) traffic that form an association that is used to perform traffic classification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnL2MultiFieldClfrEntry

ntnL2MultiFieldClfrEntry 1.3.6.1.4.1.45.4.7.1.5.4.1
IEEE 802-based classifier definitions. An entry specifies (potentially) several distinct matching components. Each component is tested against the data in a frame individually. An overall match occurs when all of the individual components match the data they are compared against in the frame being processed. A failure of any one test causes the overall match to fail. Wildcards may be specified for those fields that are not relevant.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnL2MultiFieldClfrEntry  

ntnL2MultiFieldClfrId 1.3.6.1.4.1.45.4.7.1.5.4.1.1
An arbitrary integer index that uniquely identifies this 802 classifier among all of the 802 classifiers. Version 1/2 attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnL2MultiFieldClfrDstAddr 1.3.6.1.4.1.45.4.7.1.5.4.1.2
The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical address specified by this object, taking into account address wildcarding as specified by the ntnL2MultiFieldClfrDstAddrMask object, are potentially subject to the processing guidelines that are associated with this entry through the related action class. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnL2MultiFieldClfrDstAddrMask 1.3.6.1.4.1.45.4.7.1.5.4.1.3
This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against the address specified in the ntnL2MultiFieldClfrDstAddr object. The value of this object represents a mask that is logically and'ed with the 802 DA in received frames to derive the value to be compared against the ntnL2MultiFieldClfrDstAddr address. A zero bit in the mask thus means that the corresponding bit in the address always matches. The ntnL2MultiFieldClfrDstAddr value must also be masked using this value prior to any comparisons. The length of this object in octets must equal the length in octets of the ntnL2MultiFieldClfrDstAddr. Note that a mask with no bits set (i.e., all zeroes) effectively wildcards the ntnL2MultiFieldClfrDstAddr object. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnL2MultiFieldClfrSrcAddr 1.3.6.1.4.1.45.4.7.1.5.4.1.4
The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches the physical address specified by this object, taking into account address wildcarding as specified by the ntnL2MultiFieldClfrSrcAddrMask object, are potentially subject to the processing guidelines that are associated with this entry through the related action class. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnL2MultiFieldClfrSrcAddrMask 1.3.6.1.4.1.45.4.7.1.5.4.1.5
This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison against the address specified in the ntnL2MultiFieldClfrSrcAddr object. The value of this object represents a mask that is logically and'ed with the 802 MAC SA in received frames to derive the value to be compared against the ntnL2MultiFieldClfrSrcAddr address. A zero bit in the mask thus means that the corresponding bit in the address always matches. The ntnL2MultiFieldClfrSrcAddr value must also be masked using this value prior to any comparisons. The length of this object in octets must equal the length in octets of the ntnL2MultiFieldClfrSrcAddr. Note that a mask with no bits set (i.e., all zeroes) effectively wildcards the ntnL2MultiFieldClfrSrcAddr object. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnL2MultiFieldClfrVlanIdMin 1.3.6.1.4.1.45.4.7.1.5.4.1.6
The minimum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrVlanIdMin value must be less than or equal to the ntnL2MultiFieldClfrVlanIdMax value. Setting the ntnL2MultiFieldClfrVlanIdMin object to 1 and the ntnL2MultiFieldClfrVlanIdMax to 4094 indicates that VLAN data should not be considered during traffic classification. If a frame is double tagged, this value represents the outer VLAN ID (Ovid). Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

ntnL2MultiFieldClfrVlanIdMax 1.3.6.1.4.1.45.4.7.1.5.4.1.7
The maximum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrVlanIdMax value must be greater than or equal to the ntnL2MultiFieldClfrVlanIdMin value. Setting the ntnL2MultiFieldClfrVlanIdMin object to 1 and the ntnL2MultiFieldClfrVlanIdMax to 4094 indicates that VLAN data should not be considered during traffic classification. If a frame is double tagged, this value represents the outer VLAN ID (Ovid). Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

ntnL2MultiFieldClfrVlanTag 1.3.6.1.4.1.45.4.7.1.5.4.1.8
This object indicates the data link layer packet format that frames must have to match this L2 classifier entry. A value of 'untagged(1)' indicates that only frames received untagged will match this classifier component. A value of 'tagged(2)' means that only frames received tagged (both single tagged and double tagged) will be considered a match. A value of 'ignore(3)' means that the presence, or lack thereof, of a VLAN tag in the received packet will not be considered when determining whether a frame matches this classifier entry. A value of 'doubleTagged(4)' means that only frames received with an inner and outer tag (i.e., a double tagged frame) will be considered a match. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER untagged(1), tagged(2), ignore(3), doubleTagged(4)  

ntnL2MultiFieldClfrEtherType 1.3.6.1.4.1.45.4.7.1.5.4.1.9
This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Example settings would include 'IP' (0x0800), 'ARP' (0x0806) and 'IPX' (0x8137). Setting the ntnL2MultiFieldClfrEtherType object to 0xFFFF indicates that EtherType data should not be considered during traffic classification. Note the EtherType value of 0xFFFF is reserved by IANA. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..ffff  

ntnL2MultiFieldClfrUserPriority 1.3.6.1.4.1.45.4.7.1.5.4.1.10
The 802.1p user priority value against which the value contained in the user priority field of a tagged 802.1 frame is compared. A test for equality is performed when determining if a match exists between the data in a data link layer frame and the value of this classifier. Setting the value of this object to 'matchAllPriorities(9)' causes all user priority values to match this attribute. This essentially makes any comparisons with regard to user priority values unnecessary. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER matchPriority0(1), matchPriority1(2), matchPriority2(3), matchPriority3(4), matchPriority4(5), matchPriority5(6), matchPriority6(7), matchPriority7(8), matchAllPriorities(9)  

ntnL2MultiFieldClfrStorage 1.3.6.1.4.1.45.4.7.1.5.4.1.11
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnL2MultiFieldClfrStatus 1.3.6.1.4.1.45.4.7.1.5.4.1.12
The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnL2MultiFieldClfrLabel 1.3.6.1.4.1.45.4.7.1.5.4.1.13
A label used to reference the classifier entry in a textual manner. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnL2MultiFieldClfrSessionId 1.3.6.1.4.1.45.4.7.1.5.4.1.14
A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnL2MultiFieldClfrVersion 1.3.6.1.4.1.45.4.7.1.5.4.1.15
Version indicator for ntnL2MultiFieldClfrTable.
Status: current Access: read-create
OBJECT-TYPE    
  VersionIndicator  

ntnL2MultiFieldClfrPktType 1.3.6.1.4.1.45.4.7.1.5.4.1.16
This object indicates the data link layer frame format that frames must have to match this L2 classifier entry. A value of 'ethernetII(1)' indicates that only Ethernet II format frames will match this classifier component. A value of 'snap(2)' indicates that only IEEE 802 SNAP format frames will match this classifier component. A value of 'llc(3)' indicates that only IEEE 802 LLC format frames will match this classifier component. A value of 'ignore(4)' means that the frame, format will not be considered when determining whether a frame matches this classifier entry. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ethernetII(1), snap(2), llc(3), ignore(4)  

ntnL2MultiFieldClfrIvidMin 1.3.6.1.4.1.45.4.7.1.5.4.1.17
The minimum value that the Inner VLAN ID (Ivid) in a double tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrIvidMin value must be less than or equal to the ntnL2MultiFieldClfrIvidMax value. Setting the ntnL2MultiFieldClfrIvidMin object to 1 and the ntnL2MultiFieldClfrIvidMax to 4094 indicates that inner VLAN tag data should not be considered during traffic classification. A non-default value for this attribute may only be specified if the ntnL2MultiFieldClfrVlanTag attribute has a value of 'doubleTagged(4)'. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

ntnL2MultiFieldClfrIvidMax 1.3.6.1.4.1.45.4.7.1.5.4.1.18
The maximum value that the Inner VLAN ID (Ivid) in a double tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrIvidMax value must be greater than or equal to the ntnL2MultiFieldClfrIvidMin value. Setting the ntnL2MultiFieldClfrIvidMin object to 1 and the ntnL2MultiFieldClfrIvidMax to 4094 indicates that VLAN data should not be considered during traffic classification. A non-default value for this attribute may only be specified if the ntnL2MultiFieldClfrVlanTag attribute has a value of 'doubleTagged(4)'. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

ntnL2MultiFieldClfrTPID 1.3.6.1.4.1.45.4.7.1.5.4.1.19
This object specifies the value that will be compared against the value contained in the Ethertype field of the outer tag of a single or a double tagged (802.1ad QinQ) packet. Setting the ntnL2MultiFieldClfrTPID object to 0xFFFF indicates that EtherType data should not be considered during traffic classification. Note the EtherType value of 0xFFFF is reserved by IANA. The default value is 0x8100, considering the standard 0x8100 value as the tag protocol identifier for the vlan tag. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..ffff  

ntnL2MultiFieldClfrCFI 1.3.6.1.4.1.45.4.7.1.5.4.1.20
This object indicates the data link layer frame format that frames must have to match this L2 classifier entry. A value of 'cfiZero(1)' indicates that only tagged frames with the CFI bit set to zero will match this classifier component. A value of 'cfiOne(2)' indicates that only tagged frames with the CFI bit is set to one will match this classifier component. A value of 'ignore(3)' means that the frame, format will not be considered when determining whether a frame matches this classifier entry. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER cfiZero(1), cfiOne(2), ignore(3)  

ntnL2MultiFieldClfrITPID 1.3.6.1.4.1.45.4.7.1.5.4.1.21
This object specifies the value that will be compared against the value contained in the Ethertype field of the inner tag of a double tagged (802.1ad QinQ) packet. Setting the ntnL2MultiFieldClfrITPID object to 0xFFFF indicates that EtherType data should not be considered during traffic classification. Note the EtherType value of 0xFFFF is reserved by IANA. The default value is 0x8100, considering the standard 0x8100 value as the tag protocol identifier for the vlan tag. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..ffff  

ntnL2MultiFieldClfrICFI 1.3.6.1.4.1.45.4.7.1.5.4.1.22
This object indicates the data link layer frame format that frames must have to match this L2 classifier entry. A value of 'cfiZero(1)' indicates that only double tagged frames with the CFI bit set to zero in the inner tag will match this classifier component. A value of 'cfiOne(1)' indicates that only double tagged frames with the CFI bit set to one in the inner tag will match this classifier component. A value of 'ignore(3)' means that the frame, format will not be considered when determining whether a frame matches this classifier entry. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER cfiZero(1), cfiOne(2), ignore(3)  

ntnL2MultiFieldClfrIUserPriority 1.3.6.1.4.1.45.4.7.1.5.4.1.23
The 802.1p user priority value against which the value contained in the user priority field of the inner tag of a double tagged 802.1 frame is compared. A test for equality is performed when determining if a match exists between the data in a data link layer frame and the value of this classifier. Setting the value of this object to 'matchAllPriorities(9)' causes all user priority values to match this attribute. This essentially makes any comparisons with regard to user priority values unnecessary. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER matchPriority0(1), matchPriority1(2), matchPriority2(3), matchPriority3(4), matchPriority4(5), matchPriority5(6), matchPriority6(7), matchPriority7(8), matchAllPriorities(9)  

ntnSystemClfrNextFree 1.3.6.1.4.1.45.4.7.1.5.5
This object contains an unused value for ntnSystemClfrId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnSystemClfrTable 1.3.6.1.4.1.45.4.7.1.5.6
The System Classifier Table defines classification data that is platform or hardware specific.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnSystemClfrEntry

ntnSystemClfrEntry 1.3.6.1.4.1.45.4.7.1.5.6.1
An entry in the System Classifier Table describes classification data that is specifically related to system or hardware capabilities. As such, support for this table or for individual attributes contained in the table will vary from system to system. Entries within this table are referenced through the Classifier Component Table (ntnClfrComponentTable) to provide system-specific classification data.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnSystemClfrEntry  

ntnSystemClfrId 1.3.6.1.4.1.45.4.7.1.5.6.1.1
An index that enumerates the system classifier entries. Managers can obtain new index values for row creation in this table by reading ntnSystemClfrNextFree. Version 1/2 attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnSystemClfrUnknownUcastFrames 1.3.6.1.4.1.45.4.7.1.5.6.1.2
If 'true(1)', frames containing an unknown unicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnSystemClfrUnknownMcastFrames 1.3.6.1.4.1.45.4.7.1.5.6.1.3
If 'true(1)', frames containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnSystemClfrKnownUcastFrames 1.3.6.1.4.1.45.4.7.1.5.6.1.4
If 'true(1)', frames containing a known unicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnSystemClfrKnownMcastFrames 1.3.6.1.4.1.45.4.7.1.5.6.1.5
If 'true(1)', frames containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnSystemClfrBcastFrames 1.3.6.1.4.1.45.4.7.1.5.6.1.6
If 'true(1)', frames containing a broadcast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnSystemClfrPatternPosition 1.3.6.1.4.1.45.4.7.1.5.6.1.7
Supports arbitrary pattern match classification. Up to 128 bytes of data within the first 128 bytes of a packet can be identified for pattern matching purposes. This object and the ntnSystemClfrPatternData object specify byte patterns and their position in a packet. When a packet is classified using this data, the appropriate bytes, or portions thereof, in the packet are compared against the byte patterns defined by the ntnSystemClfrPatternData attribute. If the data at the specified packet offset is the same, the packet is considered a match. The byte positions, and the pertinent bits within each identified byte, used for comparison purposes are specified using this attribute. The positions to be matched are identified by setting the appropriate bits to one. All other bits must be set to zero. For example, to specify that byte positions 5-8 and the high-order nibble (4 bits) of bytes 13-16 should be examined, this attribute would be set as follows: ntnSystemClfrPatternPosition (size 16): 00:00:00:00:FF:FF:FF:FF:00:00:00:00:0F:0F:0F:0F The target byte patterns would then be placed in bytes 5-8 and in portions of bytes 13-16 of the ntnSystemClfrPatternData attribute: ntnSystemClfrPatternData (size 16): 00:00:00:00:XX:XX:XX:XX:00:00:00:00:0Y:0Y:0Y:0Y Note that an implementation may not support pattern matching, also know as offset filtering, for the maximum number of bytes supported by the pattern match attributes. The number of bytes that can contain data for comparison purposes and the position of those bytes in relation to the start of a packet are thus implementation dependent. Use of this object and the associated ntnSystemClfrPatternData object invalidates the use of any other classification data in this and related (through the ntnClfrComponentTable) classifier entries. In other words, providing an explicit pattern overrides the implicit patterns defined when classification data is specified for other fields, such as the IP source address or EtherType classification attributes. A zero length string is used to indicate that explicit pattern matching is not requested. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

ntnSystemClfrPatternData 1.3.6.1.4.1.45.4.7.1.5.6.1.8
Supports arbitrary pattern match classification. Up to 128 bytes of data within the first 128 bytes of a packet can be identified for pattern matching purposes. This object and the ntnSystemClfrPatternPosition object specify byte patterns and their position in a packet. When a packet is classified using this data, the appropriate bytes, or portions thereof, in the packet are compared against the byte patterns defined by the this attribute. If the data at the specified packet offset is the same, the packet is considered a match. The byte patterns used for comparison purposes are specified using this attribute. The target data is placed in the octet string at the positions specified through the ntnSystemClfrPatternPosition attribute. All other bytes should be set to zero For example, to specify that byte positions 5-8 and the high-order nibble (4 bits) of bytes 13-16 should be examined, the associated ntnSystemClfrPatternPosition value would be set as follows: ntnSystemClfrPatternPosition (size 16): 00:00:00:00:FF:FF:FF:FF:00:00:00:00:0F:0F:0F:0F The target byte patterns would then be placed in bytes 5-8 and in portions of bytes 13-16 of this attribute: ntnSystemClfrPatternData (size 16): 00:00:00:00:XX:XX:XX:XX:00:00:00:00:0Y:0Y:0Y:0Y Note that an implementation may not support pattern matching, also know as offset filtering, for the maximum number of bytes supported by the pattern match attributes. The number of bytes that can contain data for comparison purposes and the position of those bytes in relation to the start of a packet are thus implementation dependent. Use of this object and the associated ntnSystemClfrPatternPosition object invalidates the use of any other classification data in this and related (through the ntnClfrComponentTable) classifier entries. In other words, providing an explicit pattern overrides the implicit patterns defined when classification data is specified for other fields, such as the IP source address or EtherType classification attributes. A zero length string is used to indicate that explicit pattern matching is not requested. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

ntnSystemClfrStorage 1.3.6.1.4.1.45.4.7.1.5.6.1.9
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnSystemClfrStatus 1.3.6.1.4.1.45.4.7.1.5.6.1.10
The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnSystemClfrPatternFormat 1.3.6.1.4.1.45.4.7.1.5.6.1.11
This object indicates the data link layer packet format that is used when specifying pattern match data. A value of 'untagged(1)' indicates that the specified pattern match data does not include an 802.1Q tag. A value of 'tagged(2)' indicates that the specified pattern match data does include an 802.1Q (single) tag. A value of 'doubleTagged(3)' indicates that the specified pattern match data does include an 802.1Q double tag. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER untagged(1), tagged(2), doubleTagged(3)  

ntnSystemClfrLabel 1.3.6.1.4.1.45.4.7.1.5.6.1.12
A label used to reference the classifier entry in a textual manner. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnSystemClfrSessionId 1.3.6.1.4.1.45.4.7.1.5.6.1.13
A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnSystemClfrVersion 1.3.6.1.4.1.45.4.7.1.5.6.1.14
Version indicator for ntnSystemClfrTable.
Status: current Access: read-create
OBJECT-TYPE    
  VersionIndicator  

ntnSystemClfrUnknownIpMcast 1.3.6.1.4.1.45.4.7.1.5.6.1.15
If 'true(1)', IP packets containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnSystemClfrKnownIpMcast 1.3.6.1.4.1.45.4.7.1.5.6.1.16
If 'true(1)', IP packets containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnSystemClfrNonIpPkt 1.3.6.1.4.1.45.4.7.1.5.6.1.17
If 'true(1)', non IP packets will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this packet type. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnSystemClfrPatternIpVersion 1.3.6.1.4.1.45.4.7.1.5.6.1.18
This object indicates the IP packet format that is used when specifying pattern match data. A value of 'notApplicable(1)' is used when the pattern match data can be specified without indicating the target packet type. A value of 'nonIp(2)' indicates that the specified pattern match data should be applied to non-IP packets. A value of 'ipv4(3)' indicates that the specified pattern match data should be applied to IPv4 packets. A value of 'ipv6(4)' indicates that the specified pattern match data should be applied to IPv6 packets. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notApplicable(1), nonIp(2), ipv4(3), ipv6(4)  

ntnSystemClfrUnknownNonIpMcast 1.3.6.1.4.1.45.4.7.1.5.6.1.19
If 'true(1)', non-IP packets containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnSystemClfrKnownNonIpMcast 1.3.6.1.4.1.45.4.7.1.5.6.1.20
If 'true(1)', non-IP packets containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnSystemClfrPatternL2Format 1.3.6.1.4.1.45.4.7.1.5.6.1.21
This object indicates the L2 packet format that is used when specifying pattern match data. A value of 'notApplicable(1)' is used when the pattern match data can be specified without indicating the target L2 packet format. A value of 'ethernetII(2)' indicates that the specified pattern match data should be applied to Ethernet II format frames. A value of 'snap(3)' indicates that the specified pattern match data should be applied to IEEE 802 SNAP format frames. A value of 'llc(4)' indicates that the specified pattern match data should be applied to IEEE 802 LLC format frames. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notApplicable(1), ethernetII(2), snap(3), llc(4)  

ntnClfrComponentNextFree 1.3.6.1.4.1.45.4.7.1.5.7
This object contains an unused value for ntnClfrComponentId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnClfrComponentTable 1.3.6.1.4.1.45.4.7.1.5.8
The Classifier Component Table identifies classification data from protocol, media and hardware specific tables and links the data to form a single classifier.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnClfrComponentEntry

ntnClfrComponentEntry 1.3.6.1.4.1.45.4.7.1.5.8.1
An entry in the Classifier Component Table describes a collection of classification data from a single protocol, media or hardware specific classifier table. Entries within this table are linked through a common set identifier. This identifier is used to reference the constructed set of classification data for a policy, through the ntnQosPolicyTable, or for classifier block creation, through the ntnClfrBlockTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnClfrComponentEntry  

ntnClfrComponentId 1.3.6.1.4.1.45.4.7.1.5.8.1.1
An index that enumerates the classifier component entries. Managers can obtain new index values for row creation in this table by reading ntnClfrComponentNextFree. Version 1/2 attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnClfrComponentSpecific 1.3.6.1.4.1.45.4.7.1.5.8.1.2
Identifies an entry containing classification data in a protocol, media or hardware specific classifier table. Entries are referenced using a RowPointer value specifying the RowStatus attribute of the entry being identified. Entries in other tables must exist prior to being referenced. It may be permissible to create component table entries and the entries being referenced in the same request. Entries may not be deleted while still referenced by an active entry in this table. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowPointer  

ntnClfrComponentSetId 1.3.6.1.4.1.45.4.7.1.5.8.1.3
Identifies a set of classifier data. Entries in this table with the same value for this attribute are considered components of the same classifier. This set identifier is used to reference this classification data from other QoS tables, including the QoS Policy Table (ntnQosPolicyTable) and the Classifier Block Table (ntnClfrBlockTable). Members of a given classifier component set may be prohibited from being deleted if the set is referenced by an active entry in another table. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..65535  

ntnClfrComponentLabel 1.3.6.1.4.1.45.4.7.1.5.8.1.4
A label used to reference the classifier component set in a textual manner. All members of the same component set, as determined by the value of the ntnClfrComponentSetId attribute, must have the same label. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnClfrComponentStorage 1.3.6.1.4.1.45.4.7.1.5.8.1.5
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnClfrComponentStatus 1.3.6.1.4.1.45.4.7.1.5.8.1.6
The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnClfrComponentSessionId 1.3.6.1.4.1.45.4.7.1.5.8.1.7
A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnClfrComponentVersion 1.3.6.1.4.1.45.4.7.1.5.8.1.8
Version indicator for ntnClfrComponentTable. Members of the same classifier component set must all have the same version information.
Status: current Access: read-create
OBJECT-TYPE    
  VersionIndicator  

ntnClfrBlockNextFree 1.3.6.1.4.1.45.4.7.1.5.9
This object contains an unused value for ntnClfrBlockId ,or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnClfrBlockTable 1.3.6.1.4.1.45.4.7.1.5.10
The Classifier Block Table supports the ability to group individual classifiers into an unordered list, or block, of classifiers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnClfrBlockEntry

ntnClfrBlockEntry 1.3.6.1.4.1.45.4.7.1.5.10.1
An entry in the Classifier Block Table describes a single member of a group of the classifiers. Each entry identifies classification data, defined through the Classifier Component Table (ntnClfrComponentTable). Block members are considered unordered for evaluation purposes and can be thought of as being applied 'simultaneously'. All block members must perform classification based on the same set of data. Related entries within this table are linked through a common group identifier. This identifier is used to reference the classification block for a policy through the QoS Policy Table (ntnQosPolicyTable).
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnClfrBlockEntry  

ntnClfrBlockId 1.3.6.1.4.1.45.4.7.1.5.10.1.1
An index that enumerates the classifier block entries. Managers can obtain new index values for row creation in this table by reading ntnClfrBlockNextFree. Version 1/2 attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnClfrBlockNumber 1.3.6.1.4.1.45.4.7.1.5.10.1.2
Identifies a group of classification entries. Entries in this table with the same value for this attribute are considered members of the same group (i.e., classifier block). This block identifier is used to reference this unordered collection of classification data from other QoS tables, including the QoS Policy Table (ntnQosPolicyTable). Members of a specific classification group may be deleted, even if the group is referenced by an active entry in another table, as long as at least one member of the group is not deleted. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..65535  

ntnClfrBlockClfrCompSetId 1.3.6.1.4.1.45.4.7.1.5.10.1.3
Identifies a classifier component set in the Classifier Component Table (ntnClfrComponentTable) containing classification data. Component entries must exist prior to being referenced. It may be permissible to create component table entries and classifier block entries in the same request. Referenced entries may not be deleted while still referenced by an active entry in this table. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..65535  

ntnClfrBlockMeter 1.3.6.1.4.1.45.4.7.1.5.10.1.4
This attribute identifies the meter that is associated with this classifier block. Meters are specified in the ntnQosMeterTable and associated tables. The corresponding instance in the ntnQosMeter class (i.e., the class instance where the ntnQosMeterId is equal to the value of this object) must exist prior to being associated with a block entry. A value of 0 indicates that no individual classifier metering is requested. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  IndexIntegerOrZero  

ntnClfrBlockAction 1.3.6.1.4.1.45.4.7.1.5.10.1.5
This attribute identifies the action that is to be initiated for flows that are not being metered and that match the classification criteria specified through this classifier block. The value of this attribute will not be used (and should be set to 0) when metering is requested. Under this scenario, the in-profile and out-of-profile actions are specified through the appropriate ntnQosMeterEntry. Actions must be defined in the ntnQosBaseActionTable prior to being referenced by this attribute. A non-zero value for this attribute must be provided unless metering is requested (if action data is being specified per classifier). Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  IndexIntegerOrZero  

ntnClfrBlockLabel 1.3.6.1.4.1.45.4.7.1.5.10.1.6
A label used to reference the classifier group in a textual manner. All members of the same group, as determined by the value of the ntnClfrBlockNumber attribute, must have the same label. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnClfrBlockStorage 1.3.6.1.4.1.45.4.7.1.5.10.1.7
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnClfrBlockStatus 1.3.6.1.4.1.45.4.7.1.5.10.1.8
The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnClfrBlockSessionId 1.3.6.1.4.1.45.4.7.1.5.10.1.9
A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnClfrBlockVersion 1.3.6.1.4.1.45.4.7.1.5.10.1.10
Version indicator for ntnClfrBlockTable. Members of the same classifier block must all have the same version information.
Status: current Access: read-create
OBJECT-TYPE    
  VersionIndicator  

ntnClfrBlockPrecedence 1.3.6.1.4.1.45.4.7.1.5.10.1.11
The relative order in which the classifier sets associated with this block are applied, with regard to other classifiers sets within the block. Higher numbers represent block members with higher precedence. Block members with higher precedence are applied before members with lower precedence. Precedence values must be unique across members of the same classifier block when block members are evaluated in a specific order. Precedence values must be the same across block members when they are evaluated simultaneously. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

ntnClfrComponentSetNextFree 1.3.6.1.4.1.45.4.7.1.5.11
This object contains an unused value for ntnClfrComponentSetId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnClfrBlockNumberNextFree 1.3.6.1.4.1.45.4.7.1.5.12
This object contains an unused value for ntnClfrBlockNumber ,or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosMeterClasses 1.3.6.1.4.1.45.4.7.1.6
OBJECT IDENTIFIER    

ntnQosMeterNextFree 1.3.6.1.4.1.45.4.7.1.6.1
This object contains an unused value for ntnQosMeterId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosMeterTable 1.3.6.1.4.1.45.4.7.1.6.2
This table enumerates specific meters that a system may use to police a stream of traffic. Specific meter details are to be found in table entry referenced by ntnQosMeterSpecific.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosMeterEntry

ntnQosMeterEntry 1.3.6.1.4.1.45.4.7.1.6.2.1
An entry in the meter table describes a single conformance level of a meter.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosMeterEntry  

ntnQosMeterId 1.3.6.1.4.1.45.4.7.1.6.2.1.1
An index that enumerates the Meter entries. Managers can obtain new index values for row creation in this table by reading ntnQosMeterNextFree. Version 1/2 attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosMeterSucceedNext 1.3.6.1.4.1.45.4.7.1.6.2.1.2
If the traffic being processed does conform, based on the traffic profile associated with this entry, this selects the next element to handle traffic for this data path. This RowPointer should point to an instance of one of: ntnQosMeterEntry ntnQosBaseActionEntry Entries in other tables must exist prior to being referenced. It may be permissible to create component table entries and the entries being referenced in the same request. Referenced entries may not be deleted while still referenced by an active entry in this table. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowPointer  

ntnQosMeterFailNext 1.3.6.1.4.1.45.4.7.1.6.2.1.3
If the traffic being processed does not conform, based on the traffic profile associated with this entry, this selects the next element to handle traffic for this data path. This RowPointer should point to an instance of one of: ntnQosMeterEntry ntnQosBaseActionEntry Entries in other tables must exist prior to being referenced. It may be permissible to create component table entries and the entries being referenced in the same request. Referenced entries may not be deleted while still referenced by an active entry in this table. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowPointer  

ntnQosMeterSpecific 1.3.6.1.4.1.45.4.7.1.6.2.1.4
This indicates the behavior of the meter by pointing to an entry containing detailed parameters. Note that entries in that specific table must be managed explicitly. For example, ntnQosMeterSpecific may point to an entry in ntnQosTBParamTable, which contains an instance of a single set of Token Bucket parameters. Entries in other tables must exist prior to being referenced. It may be permissible to create component table entries and the entries being referenced in the same request. Referenced entries may not be deleted while still referenced by an active entry in this table. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowPointer  

ntnQosMeterOutOfProfileStats 1.3.6.1.4.1.45.4.7.1.6.2.1.5
Identifies an entry in the Count Action Table (ntnQosCountActTable) that is used to accumulate statistics related to traffic processed based on this meter data that was deemed to be non-conformant (i.e., out-of-profile). If out-of-profile statistics are not wanted or are not available, this attribute will be set to 0. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  IndexIntegerOrZero  

ntnQosMeterLabel 1.3.6.1.4.1.45.4.7.1.6.2.1.6
A label used to reference the meter data in a textual manner. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnQosMeterStorage 1.3.6.1.4.1.45.4.7.1.6.2.1.7
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosMeterStatus 1.3.6.1.4.1.45.4.7.1.6.2.1.8
The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosMeterSessionId 1.3.6.1.4.1.45.4.7.1.6.2.1.9
A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnQosMeterVersion 1.3.6.1.4.1.45.4.7.1.6.2.1.10
Version indicator for ntnQosMeterTable.
Status: current Access: read-create
OBJECT-TYPE    
  VersionIndicator  

ntnQosTBParamNextFree 1.3.6.1.4.1.45.4.7.1.6.3
This object contains an unused value for ntnQosTBParamId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosTBParamTable 1.3.6.1.4.1.45.4.7.1.6.4
Entries in this table enumerate a set of token bucket meter parameters that a system may use to police a stream of traffic. Such meters are modeled here as having a single rate and a single burst size. Multiple entries are used when multiple rates/burst sizes are needed.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosTBParamEntry

ntnQosTBParamEntry 1.3.6.1.4.1.45.4.7.1.6.4.1
An entry that describes a single set of token bucket parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosTBParamEntry  

ntnQosTBParamId 1.3.6.1.4.1.45.4.7.1.6.4.1.1
An index that enumerates the Token Bucket Parameter entries. Managers can obtain new index values for row creation in this table by reading ntnQosTBParamNextFree. Version 1/2 attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosTBParamType 1.3.6.1.4.1.45.4.7.1.6.4.1.2
The Metering algorithm associated with the Token Bucket parameters. The number and type of algorithms supported is implementation dependent. Potential algorithms include: ntnQosTBParamSimpleTokenBucket ntnQosTBParamAvgRate ntnQosTBParamSrTCMBlind ntnQosTBParamSrTCMAware ntnQosTBParamTrTCMBlind ntnQosTBParamTrTCMAware ntnQosTBParamTswTCM An OBJECT-IDENTITY for each of these algorithms is defined in this module. Additional values may be specified as needed. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  AutonomousType  

ntnQosTBParamRate 1.3.6.1.4.1.45.4.7.1.6.4.1.3
The token-bucket rate, in kilobits per second (kbps). This attribute is used for: CIR for Simple Token Bucket CIR in RFC 2697 for srTCM CIR and PIR in RFC 2698 for trTCM CTR and PTR in RFC 2859 for TSWTCM AverageRate in RFC 3290. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967295  

ntnQosTBParamBurstSize 1.3.6.1.4.1.45.4.7.1.6.4.1.4
The maximum number of bytes in a single transmission burst. This attribute is used for: Token bucket size for Simple Token Bucket CBS and EBS in RFC 2697 for srTCM CBS and PBS in RFC 2698 for trTCM Burst Size in RFC 3290. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  BurstSize  

ntnQosTBParamInterval 1.3.6.1.4.1.45.4.7.1.6.4.1.5
The time interval used with the token bucket. This attribute is used for: Average Rate Meter (Informal DS Model section 5.2.1) - Delta Simple Token Bucket Meter (Informal DS Model 5.1) - time interval t RFC 2859 TSWTCM - AVG_INTERVAL RFC 2697 srTCM - token bucket update time interval RFC 2698 trTCM - token bucket update time interval. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967295  

ntnQosTBParamLabel 1.3.6.1.4.1.45.4.7.1.6.4.1.6
A label used to reference the token bucket data in a textual manner. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnQosTBParamStorage 1.3.6.1.4.1.45.4.7.1.6.4.1.7
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosTBParamStatus 1.3.6.1.4.1.45.4.7.1.6.4.1.8
The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosTBParamSessionId 1.3.6.1.4.1.45.4.7.1.6.4.1.9
A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnQosTBParamVersion 1.3.6.1.4.1.45.4.7.1.6.4.1.10
Version indicator for ntnQosTBParamTable.
Status: current Access: read-create
OBJECT-TYPE    
  VersionIndicator  

ntnQosTBParamMinRate 1.3.6.1.4.1.45.4.7.1.6.4.1.11
The minimum token-bucket rate, in kilobits per second (kbps). Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967295  

ntnQosTBMeters 1.3.6.1.4.1.45.4.7.1.6.5
OBJECT IDENTIFIER    

ntnQosTBParamSimpleTokenBucket 1.3.6.1.4.1.45.4.7.1.6.5.1
Two Parameter Token Bucket Meter as described in the Informal Differentiated Services Model section 5.2.3.
Status: current Access: read-create
OBJECT-IDENTITY    

ntnQosTBParamAvgRate 1.3.6.1.4.1.45.4.7.1.6.5.2
Average Rate Meter as described in the Informal Differentiated Services Model section 5.2.1.
Status: current Access: read-create
OBJECT-IDENTITY    

ntnQosTBParamSrTCMBlind 1.3.6.1.4.1.45.4.7.1.6.5.3
Single Rate Three Color Marker Metering as defined by RFC 2697,in the `Color Blind' mode as described by the RFC.
Status: current Access: read-create
OBJECT-IDENTITY    

ntnQosTBParamSrTCMAware 1.3.6.1.4.1.45.4.7.1.6.5.4
Single Rate Three Color Marker Metering as defined by RFC 2697,in the `Color Aware' mode as described by the RFC.
Status: current Access: read-create
OBJECT-IDENTITY    

ntnQosTBParamTrTCMBlind 1.3.6.1.4.1.45.4.7.1.6.5.5
Two Rate Three Color Marker Metering as defined by RFC 2698, in the `Color Blind' mode as described by the RFC.
Status: current Access: read-create
OBJECT-IDENTITY    

ntnQosTBParamTrTCMAware 1.3.6.1.4.1.45.4.7.1.6.5.6
Two Rate Three Color Marker Metering as defined by RFC 2698, in the `Color Aware' mode as described by the RFC.
Status: current Access: read-create
OBJECT-IDENTITY    

ntnQosTBParamTswTCM 1.3.6.1.4.1.45.4.7.1.6.5.7
Time Sliding Window Three Color Marker Metering as defined by RFC 2859.
Status: current Access: read-create
OBJECT-IDENTITY    

ntnQosActionClasses 1.3.6.1.4.1.45.4.7.1.7
OBJECT IDENTIFIER    

ntnQosBaseActionNextFree 1.3.6.1.4.1.45.4.7.1.7.1
This object contains an unused value for ntnQosBaseActionId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosBaseActionTable 1.3.6.1.4.1.45.4.7.1.7.2
Contains the current set of configured base actions. The actions are associated with classifiers, meters and interfaces through policies during operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosBaseActionEntry

ntnQosBaseActionEntry 1.3.6.1.4.1.45.4.7.1.7.2.1
General action definitions. Each entry specifies an instance of the ntnQosBaseAction class which describes (potentially) several distinct action attributes. Each action is taken individually regarding the data in question. Several actions can be taken for a single frame. An instance of this class cannot be deleted while it is being referenced by an entry in another class.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosBaseActionEntry  

ntnQosBaseActionId 1.3.6.1.4.1.45.4.7.1.7.2.1.1
An index that enumerates the QoS Base Action entries. Managers can obtain new index values for row creation in this table by reading ntnQosBaseActionNextFree. Actions are associated with instances in other classes (e.g., the QoS Policy class) using this attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosBaseActionDrop 1.3.6.1.4.1.45.4.7.1.7.2.1.2
This action attribute is used to specify whether a packet should dropped, switched (i.e., not dropped) or whether the decision to drop the packet should be deferred. The value 'drop(1)', when specified, will cause the packet being evaluated to be dropped. A value of 'dontDrop(2)' indicates that this packet should not be dropped. A value of 'deferredPass(3)' indicates that no explicit assertion, related to whether or not the packet should be discarded, is being made. This option, when available, can be used to allow actions associated with lower precedence policies to determine whether a packet should be dropped or not. A 'drop(1)' or 'dontDrop(2)' in a lower precedence action is given precedence over a higher precedence 'deferredPass(3)'. Support for this enumeration is implementation dependent. Prior to discarding a packet, other actions that have been specified should be performed if they make protocol sense. For example, requests for traffic mirroring (if such an action is supported by a device) should be honored. However, updating protocol header values will typically not be necessary.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER drop(1), dontDrop(2), deferredPass(3)  

ntnQosBaseActionUpdateDscp 1.3.6.1.4.1.45.4.7.1.7.2.1.3
This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram to be updated with the value of this object.
Status: current Access: read-create
OBJECT-TYPE    
  DscpUpdate  

ntnQosBaseActionUpdateUserPriority 1.3.6.1.4.1.45.4.7.1.7.2.1.4
This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated based on the value of this object. Specifying a value equal to 'deriveFromIngressTosPrec(9)' means that the value for this attribute will be assigned based on the value of the precedence bits in the IP Type-Of-Service (TOS) field, as defined in RFC 791. The eight precedence values, also referred to as Class Selector (CS) values, have a one-to-one correspondence with the eight 802.1p user priority values. Specifying a value equal to 'deriveFromIngressDscp(10)' means that the value for this attribute will be assigned based on DSCP-to-user priority map information maintained in the system. The DSCP value in received traffic will be used to determine the user priority. Specifying a value equal to 'deriveFromEgressDscp(11)' means that the value for this attribute will be assigned based on DSCP-to-user priority map information maintained in the system. The DSCP value specified for remarking in the ntnQosBaseActionUpdateDscp attribute will be used to determine the user priority. Specifying a value equal to 'ignore(12)' means that no action will be taken related to this attribute. Specifying a value equal to 'markAsPriorityCopy(13)' means that the priority is updated based on the user priority field in the outer vlan tag. The priority copy functionality can be used for 802.1ad double tagged traffic where the priority field in the service provider vlan tag can be copied from the user priority in the customer vlan tag.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER markAsPriority0(1), markAsPriority1(2), markAsPriority2(3), markAsPriority3(4), markAsPriority4(5), markAsPriority5(6), markAsPriority6(7), markAsPriority7(8), deriveFromIngressTosPrec(9), deriveFromIngressDscp(10), deriveFromEgressDscp(11), ignore(12), markAsPriorityCopy(13)  

ntnQosBaseActionSetDropPrecedence 1.3.6.1.4.1.45.4.7.1.7.2.1.5
This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop precedence may be used to determine traffic precedence relative to other traffic being processed by the device and other implementation specific operations at the egress interface. A low value for the drop precedence equates to the traffic receiving a higher priority in terms of processing. In other words, when congestion is encountered, packets with a 'highDropPrec(2)' will be dropped before packets with a 'lowDropPrec(1)'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER lowDropPrec(1), highDropPrec(2)  

ntnQosBaseActionCopyToCpu 1.3.6.1.4.1.45.4.7.1.7.2.1.6
This action attribute, when specified, has the ability to cause the packet being evaluated to be sent to the CPU for further processing. Extreme care should be taken when setting this object to 'true(1)' since this action may adversely affect resource availability in the system impacting overall system operation. A value of 'false(2)' indicates that this action will not be initiated. If this operation is requested and 'drop' has been specified, the packet will be sent to the CPU and not forwarded by the system. Specifying 'true(1)' when 'drop' has not been specified will cause a copy of the packet to be sent to the CPU and the packet itself will receive normal forwarding treatment.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosBaseActionMirrorFrame 1.3.6.1.4.1.45.4.7.1.7.2.1.7
This action attribute, when specified, will cause the packet being evaluated to be sent to a predefined egress port for transmission in addition to the normal processing associated with the packet. Specification of the egress port or ports that will serve as the destination for mirrored data is beyond the scope of this document. Furthermore, note that data mirroring can potentially consume substantial resources at the egress. Over-subscription issues should be considered prior to specifying this action. A value of 'false(2)' indicates that this action will not be initiated. If this operation is requested and 'drop' has been specified, the packet will be mirrored to the specified port and not forwarded by the system. Specifying 'true(1)' when 'drop' has not been specified will cause a copy of the packet to be mirrored and the packet itself will receive normal forwarding treatment.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosBaseActionExtension 1.3.6.1.4.1.45.4.7.1.7.2.1.8
Identifies an entry in an auxiliary action table containing additional actions to be performed on/applied to identified traffic. Entries are referenced using a RowPointer value specifying the RowStatus attribute of the entry being identified. Entries in other tables must exist prior to being referenced. It may be permissible to create base table entries and the entries being referenced in the same request. Referenced entries may not be deleted while still referenced by an active entry in this table. A null value for this attribute (0.0) indicates that no action extensions have been specified.
Status: current Access: read-create
OBJECT-TYPE    
  RowPointer  

ntnQosBaseActionLabel 1.3.6.1.4.1.45.4.7.1.7.2.1.9
A label used to reference the action entry in a textual manner.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnQosBaseActionStorage 1.3.6.1.4.1.45.4.7.1.7.2.1.10
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosBaseActionStatus 1.3.6.1.4.1.45.4.7.1.7.2.1.11
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosBaseActionSessionId 1.3.6.1.4.1.45.4.7.1.7.2.1.12
A session identifier used to reference transitory (volatile) data.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnQosIfcActionNextFree 1.3.6.1.4.1.45.4.7.1.7.3
This object contains an unused value for ntnQosIfcActionId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosIfcActionTable 1.3.6.1.4.1.45.4.7.1.7.4
Contains the current set of configured interface actions. The actions are associated with classifiers, meters and interfaces through policies during operation indirectly through extensions of other action entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosIfcActionEntry

ntnQosIfcActionEntry 1.3.6.1.4.1.45.4.7.1.7.4.1
Interface action definitions. Each entry specifies an instance of the ntnQosIfcAction class which describes (potentially) several distinct action attributes. Each action is taken individually regarding the data in question. Several actions can be taken for a single frame. An instance of this class cannot be deleted while it is being referenced by an entry in another class.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosIfcActionEntry  

ntnQosIfcActionId 1.3.6.1.4.1.45.4.7.1.7.4.1.1
An index that enumerates the QoS Interface Action entries. Managers can obtain new index values for row creation in this table by reading ntnQosIfcActionNextFree. Actions are associated with instances in other classes (e.g., the QoS Base Action class) using this attribute as a component in the identifying RowPointer.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosIfcActionUpdateVlanId 1.3.6.1.4.1.45.4.7.1.7.4.1.2
This action attribute, when specified, will cause the Vlan Id in the frame being processed to be updated using the specified value. The Vlan Id value will not be updated based on QoS classification if the value of this attribute equals -1.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 1..4094  

ntnQosIfcActionSetEgressMask 1.3.6.1.4.1.45.4.7.1.7.4.1.3
This action component, when specified, will cause the potential list of egress interfaces for a given packet to be limited to those interfaces that are included in the egress interface mask specified by this attribute. A packet will only be transmitted out interfaces that are both identified through this attribute AND through the normal forwarding logic. Potential egress interfaces are identified by setting the bit in the egress mask that corresponds to the ifIndex value associated with the interface. Each bit of this bit mask corresponds to an ifIndex value, with the most significant bit of the i-th octet of this octet string corresponding to the ((8*i) - 7)-th ifIndex, and the least significant bit of the i-th octet corresponding to the (8*i)-th ifIndex. A zero length octet string indicates that this action component has not been set to an appropriate value and should not be used for action initiation. Egress interface restrictions will not be updated based on QoS classification in this case.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0|64)  

ntnQosIfcActionSetEgressUcastIfc 1.3.6.1.4.1.45.4.7.1.7.4.1.4
This action attribute supports redirection of normally-switched, known unicast packets to a specific interface. An egress interface is identified for redirection by setting this attribute to the logical ifIndex value associated with the interface. Setting this attribute to 0 indicates that redirection of unicast traffic based on QoS classification is not requested. Specifying the same ifIndex value for this object and the ntnQosIfcActionSetEgressNUcastIfc attribute causes all traffic to be redirected if it matches specified QoS classification criteria.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

ntnQosIfcActionSetEgressNUcastIfc 1.3.6.1.4.1.45.4.7.1.7.4.1.5
This action attribute supports redirection of normally-switched non-unicast (includes broadcast, multicast and flooded/unknown unicast) packets to a specific interface. An egress interface is identified for redirection by setting this attribute to the logical ifIndex value associated with the interface. Setting this attribute to 0 indicates that redirection of non-unicast traffic based on QoS classification is not requested. Specifying the same ifIndex value for this object and the ntnQosIfcActionSetEgressUcastIfc attribute causes all traffic to be redirected if it matches specified QoS classification criteria.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

ntnQosIfcActionExtension 1.3.6.1.4.1.45.4.7.1.7.4.1.6
Identifies an entry in an auxiliary action table containing additional actions to be performed on/applied to identified traffic. Entries are referenced using a RowPointer value specifying the RowStatus attribute of the entry being identified. Entries in other tables must exist prior to being referenced. It may be permissible to create referencing table entries and the entries being referenced in the same request. Referenced entries may not be deleted while still referenced by an active entry in this table. A null value for this attribute (0.0) indicates that no action extensions have been specified.
Status: current Access: read-create
OBJECT-TYPE    
  RowPointer  

ntnQosIfcActionLabel 1.3.6.1.4.1.45.4.7.1.7.4.1.7
A label used to reference the action entry in a textual manner.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnQosIfcActionStorage 1.3.6.1.4.1.45.4.7.1.7.4.1.8
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosIfcActionStatus 1.3.6.1.4.1.45.4.7.1.7.4.1.9
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosIfcActionSessionId 1.3.6.1.4.1.45.4.7.1.7.4.1.10
A session identifier used to reference transitory (volatile) data.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyClasses 1.3.6.1.4.1.45.4.7.1.8
OBJECT IDENTIFIER    

ntnQosPolicyNextFree 1.3.6.1.4.1.45.4.7.1.8.1
This object contains an unused value for ntnQosPolicyId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosPolicyTable 1.3.6.1.4.1.45.4.7.1.8.2
A policy class that applies a set of classifiers to interfaces specifying, for each association, the precedence order of the classifier with respect to other classifiers applied to the same interface and, for each policy, the action to take for a packet that matches the classifiers referenced by the policy. Interfaces are specified abstractly in terms of interface groups or roles. This class may reference individual classifiers or blocks of classifiers. Classification data is identified by its type (i.e., single classifier or group of classifiers) and an identifier based on the type. A policy is formed by associating the classification data with an interface group, actions to be carried out based on classification and metering criteria, if applicable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosPolicyEntry

ntnQosPolicyEntry 1.3.6.1.4.1.45.4.7.1.8.2.1
An instance of the ntnQosPolicy class. Instance creation may be prohibited based on the status of certain class attributes which must exist prior to class instantiation.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosPolicyEntry  

ntnQosPolicyId 1.3.6.1.4.1.45.4.7.1.8.2.1.1
An index that enumerates the QoS Policy entries. Managers can obtain new index values for row creation in this table by reading ntnQosPolicyNextFree. Version 1/2 attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosPolicyClassifierType 1.3.6.1.4.1.45.4.7.1.8.2.1.2
The type of classification resources that are being referenced by this QoS policy. This classifier type indication, together with the corresponding ntnQosPolicyClassifierId attribute, uniquely identifies the classification data associated with this entry. The value of this attribute dictates the interpretation of the classifier Id in the ntnQosPolicyClassifierId attribute. A value of 'individualClfr(1)' means the value references entries in the Classifier Component Table (ntnClfrComponentTable) using the component set identifier. A value of 'blockOfClfrs(2)' means the value reference entries in the Classifier Block Table (ntnClfrBlockTable) using the classification block number. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER individualClfr(1), blockOfClfrs(2)  

ntnQosPolicyClassifierId 1.3.6.1.4.1.45.4.7.1.8.2.1.3
This attribute identifies the classification data that is associated with this policy. It identifies either an individual classifier or a block of classifiers, based on the value of the ntnQosPolicyClassifierType attribute. A value of 'individualClfr(1)' means this value references entries in the Classifier Component Table (ntnClfrComponentTable) using the component set identifier. A value of 'blockOfClfrs(2)' means this value reference entries in the Classifier Block Table (ntnClfrBlockTable) using the classification block number Referenced classification data must be defined prior to being referenced. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..65535  

ntnQosPolicyInterfaceRoles 1.3.6.1.4.1.45.4.7.1.8.2.1.4
The interfaces to which this policy applies, specified in terms of a set of roles. The role combination specified by this attribute must exist in the ntnQosInterfaceTypeTable or the individual roles must exist in the ntnQosInterfaceRoleTable prior to being associated with an instance of this class. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RoleCombination  

ntnQosPolicyPrecedence 1.3.6.1.4.1.45.4.7.1.8.2.1.5
The relative order in which the classifier elements associated with this policy are applied, with regard to other classifiers applied to the same group of interfaces in other policies. Higher numbers represent policies with higher precedence. Policies with higher precedence are applied before policies with lower precedence. Precedence values must be unique across policies that are associated with the same role combination. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..65535  

ntnQosPolicyMeter 1.3.6.1.4.1.45.4.7.1.8.2.1.6
This attribute identifies the meter that is associated with this QoS Policy instance. Meters are specified in the ntnQosMeterTable and associated tables. The corresponding instance in the ntnQosMeter class (i.e., the class instance where the ntnQosMeterId is equal to the value of this object) must exist prior to being associated with a policy entry. A value of 0 indicates that no metering is requested. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  IndexIntegerOrZero  

ntnQosPolicyAction 1.3.6.1.4.1.45.4.7.1.8.2.1.7
This attribute identifies the action that is to be initiated for flows that are not being metered and that match the classification criteria specified via the classifier attributes. The value of this attribute will not be used (and should be set to 0) when metering is requested. Under this scenario, the in-profile and out-of-profile actions are specified through the appropriate ntnQosMeterEntry. Actions must be defined in the ntnQosBaseActionTable prior to being referenced by this attribute. A non-zero value for this attribute must be provided unless metering is requested. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  IndexIntegerOrZero  

ntnQosPolicyNonMatchAction 1.3.6.1.4.1.45.4.7.1.8.2.1.8
This attribute identifies the action that is to be initiated for flows that do not match the classification criteria being applied to the flow. Actions must be defined in the ntnQosBaseActionTable prior to being referenced by this attribute. Version 1 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  IndexIntegerOrZero  

ntnQosPolicyLabel 1.3.6.1.4.1.45.4.7.1.8.2.1.9
A label used to reference the QoS policy entry in a textual manner. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnQosPolicyStorage 1.3.6.1.4.1.45.4.7.1.8.2.1.10
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosPolicyStatus 1.3.6.1.4.1.45.4.7.1.8.2.1.11
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosPolicyStats 1.3.6.1.4.1.45.4.7.1.8.2.1.12
Identifies an entry in the Count Action Table (ntnQosCountActTable) that is used to accumulate statistics related to traffic processed based on this policy data. If metering is specified, the statistics entry identified by this attribute counts traffic that was deemed to be conformant (i.e., in-profile). Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  IndexIntegerOrZero  

ntnQosPolicyStatsType 1.3.6.1.4.1.45.4.7.1.8.2.1.13
The type of statistics tracking used by this QoS policy. The value of this attribute dictates the amount of statistics tracking resources (i.e., counters) consumed by this policy. A value of 'individualClfr(1)' means that separate counters will be allocated, space permitting, for each classifier referenced by the policy. A value of 'aggregateClfr(2)' means that a single counter will be used to accumulate the statistics data for all the classifiers referenced by the policy. The value of this attribute is only used when statistics tracking is enabled for the overall policy through the ntnQosPolicyStats attribute. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER individualClfr(1), aggregateClfr(2)  

ntnQosPolicyInterfaceIndex 1.3.6.1.4.1.45.4.7.1.8.2.1.14
An ifIndex value that is used to identify an interface to which the policy is to be applied. A policy is associated with an interface explicitly using this attribute or implicitly using a role combination through the ntnQosPolicyInterfaceRole attribute. An interface must be identified by one and only one of these attributes. This attribute may identify an interface that does not currently exist in the system as long as the specified interface index represents a potentially valid system interface. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

ntnQosPolicySessionId 1.3.6.1.4.1.45.4.7.1.8.2.1.15
A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyVersion 1.3.6.1.4.1.45.4.7.1.8.2.1.16
Version indicator for ntnQosPolicyTable.
Status: current Access: read-create
OBJECT-TYPE    
  VersionIndicator  

ntnQosPolicyMeteringMode 1.3.6.1.4.1.45.4.7.1.8.2.1.17
Identifies the metering mode associated with the policy. A value of 'noMetering(1)' indicates that metering is not associated with this policy. A 'policyBasedMetering(2)' value indicates that traffic identified using this policy is metered and the metering criteria is directly associated with the policy. A 'blockBasedMetering(3)' value indicates that traffic identified using this policy is metered and the metering criteria is indirectly associated with the policy (specified through the classifier criteria).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noMetering(1), policyBasedMetering(2), blockBasedMetering(3)  

ntnQosCountActNextFree 1.3.6.1.4.1.45.4.7.1.8.3
This object contains an unused value for ntnQosCountActId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosCountActTable 1.3.6.1.4.1.45.4.7.1.8.4
This table contains counters for all the traffic passing through a processing element.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosCountActEntry

ntnQosCountActEntry 1.3.6.1.4.1.45.4.7.1.8.4.1
An entry in the count action table describes a single set of traffic counters.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosCountActEntry  

ntnQosCountActId 1.3.6.1.4.1.45.4.7.1.8.4.1.1
An index that enumerates the Count Action entries. Managers can obtain new index values for row creation in this table by reading ntnQosCountActNextFree.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosCountActOctets 1.3.6.1.4.1.45.4.7.1.8.4.1.2
The number of octets processed by the associated data path element (e.g., policy, meter).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ntnQosCountActPkts 1.3.6.1.4.1.45.4.7.1.8.4.1.3
The number of packets processed by the associated data path element (e.g., policy, meter).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ntnQosCountActStorage 1.3.6.1.4.1.45.4.7.1.8.4.1.4
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosCountActStatus 1.3.6.1.4.1.45.4.7.1.8.4.1.5
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosCountActSessionId 1.3.6.1.4.1.45.4.7.1.8.4.1.6
A session identifier used to reference transitory (volatile) data.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnQosFilterStatsTable 1.3.6.1.4.1.45.4.7.1.8.5
This table contains counters for all the traffic passing through a processing element at the policy/filter level.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosFilterStatsEntry

ntnQosFilterStatsEntry 1.3.6.1.4.1.45.4.7.1.8.5.1
An entry in the filter statistics table describes a single set of traffic counters for a specific policy/filter/interface combination.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosFilterStatsEntry  

ntnQosFilterStatsPolicyId 1.3.6.1.4.1.45.4.7.1.8.5.1.1
An index component that identifies the policy associated with this Filter Statistics entry. This attribute has the same value as the ntnQosPolicyId attribute with which it is associated.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosFilterStatsFilterId 1.3.6.1.4.1.45.4.7.1.8.5.1.2
An index component that identifies the filter instance within a specific policy (as identified by the ntnQosFilterStatsPolicyId attribute) that is associated with this Filter Statistics entry. If the identified policy references an individual classifier (as specified by the QoS Policy Table ntnQosPolicyClassifierType attribute), the value of this attribute will be the referenced classifier component set ID. If a block of classifiers is specified, the value of this attribute will be the classifier component set identifier referenced by the block member. A special value (0) for this attribute indicates that aggregate, not individual, statistics are being maintained for the referenced policy. In this case, the filter ID of 0 should be thought of as a wildcard identifying all the classifiers associated with the policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexIntegerOrZero  

ntnQosFilterStatsInterfaceId 1.3.6.1.4.1.45.4.7.1.8.5.1.3
An index component that identifies the interface index referenced by the specific policy (as identified by the ntnQosFilterStatsPolicyId attribute) that is associated with this Filter Statistics entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntnQosFilterStatsInProfileOctets 1.3.6.1.4.1.45.4.7.1.8.5.1.4
The number of octets considered to be in-profile that have been processed by the associated data path classifier.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ntnQosFilterStatsInProfilePkts 1.3.6.1.4.1.45.4.7.1.8.5.1.5
The number of packets considered to be in-profile that have been processed by the associated data path classifier.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ntnQosFilterStatsOutOfProfileOctets 1.3.6.1.4.1.45.4.7.1.8.5.1.6
The number of octets considered to be out-of-profile that have been processed by the associated data path classifier.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ntnQosFilterStatsOutOfProfilePkts 1.3.6.1.4.1.45.4.7.1.8.5.1.7
The number of packets considered to be out-of-profile that have been processed by the associated data path classifier.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ntnQosFilterStatsStorage 1.3.6.1.4.1.45.4.7.1.8.5.1.8
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosFilterStatsStatus 1.3.6.1.4.1.45.4.7.1.8.5.1.9
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosPolicyDiagsTable 1.3.6.1.4.1.45.4.7.1.8.6
This table contains attributes used to track the current level of hardware resource consumption related to installed policy data on an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosPolicyDiagsEntry

ntnQosPolicyDiagsEntry 1.3.6.1.4.1.45.4.7.1.8.6.1
An entry in the QoS policy diagnostics table describes a single set of resource utilization data, related to installed policy data and non-policy data that still consumes policy resources, for a given interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosPolicyDiagsEntry  

ntnQosPolicyDiagsMasksConsumed 1.3.6.1.4.1.45.4.7.1.8.6.1.1
Tracks the current number of classification masks in-use, due to installed policy and filter data, for a given interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyDiagsFiltersConsumed 1.3.6.1.4.1.45.4.7.1.8.6.1.2
Tracks the current number of filters (i.e., rules) in-use, due to installed filter data, for a given interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyDiagsMetersConsumed 1.3.6.1.4.1.45.4.7.1.8.6.1.3
Tracks the current number of meters in-use, due to installed policy data, for a given interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyDiagsNonQosMasksConsumed 1.3.6.1.4.1.45.4.7.1.8.6.1.4
Tracks the current number of classification masks in-use, not due to installed policy and filter data, for a given interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyDiagsNonQosFiltersConsumed 1.3.6.1.4.1.45.4.7.1.8.6.1.5
Tracks the current number of filters (i.e., rules) in-use, not due to installed filter data, for a given interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyDiagsNonQosMetersConsumed 1.3.6.1.4.1.45.4.7.1.8.6.1.6
Tracks the current number of meters in-use, not due to installed policy data, for a given interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyDiagsCountersConsumed 1.3.6.1.4.1.45.4.7.1.8.6.1.7
Tracks the current number of counters in-use for a given interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyDiagsTotalMasksAvail 1.3.6.1.4.1.45.4.7.1.8.6.1.8
Tracks the total number of classification masks available for a given interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyDiagsTotalFiltersAvail 1.3.6.1.4.1.45.4.7.1.8.6.1.9
Tracks the total number of filters (i.e., rules) available for a given interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyDiagsTotalMetersAvail 1.3.6.1.4.1.45.4.7.1.8.6.1.10
Tracks the total number of meters available for a given interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyDiagsTotalCountersAvail 1.3.6.1.4.1.45.4.7.1.8.6.1.11
Tracks the total number of counters available for a given interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsTable 1.3.6.1.4.1.45.4.7.1.8.7
This table contains attributes used to track the current level of hardware resource consumption related to installed policy data for a given precedence level and interface when resources are centrally allocated.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosPolicyPrecResDiagsEntry

ntnQosPolicyPrecResDiagsEntry 1.3.6.1.4.1.45.4.7.1.8.7.1
An entry in the QoS policy precedence resource diagnostics table describes a single set of resource utilization data, related to installed policy data and non-policy data that still consumes policy resources, for a given precedence level and interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosPolicyPrecResDiagsEntry  

ntnQosPolicyPrecResDiagsPrec 1.3.6.1.4.1.45.4.7.1.8.7.1.1
The precedence value for which resource data is being returned. In a centralized architecture, a specific precedence value is typically associated with a bank or slice of filter (rule), meter and counter resources.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

ntnQosPolicyPrecResDiagsInterface 1.3.6.1.4.1.45.4.7.1.8.7.1.2
The ifIndex value that is associated with this instance of the ntnQosPolicyPrecResDiagsEntry. The ifIndex value of this attribute corresponds to the ifTable entry with the same ifIndex value. When resources are centrally allocated and not port-based, a series of interfaces is typically associated with a bank or slice of filter (rule), meter and counter resources. Interfaces associated with the same slice will have the same values for the returned resource usage data.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntnQosPolicyPrecResDiagsKeysConsumed 1.3.6.1.4.1.45.4.7.1.8.7.1.3
Tracks the current number of classification keys in-use, due to installed policy and filter data, for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsFiltersConsumed 1.3.6.1.4.1.45.4.7.1.8.7.1.4
Tracks the current number of filters (i.e., rules) in-use, due to installed filter data, for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsMetersConsumed 1.3.6.1.4.1.45.4.7.1.8.7.1.5
Tracks the current number of meters in-use, due to installed policy data, for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsNonQosKeysConsumed 1.3.6.1.4.1.45.4.7.1.8.7.1.6
Tracks the current number of classification keys in-use, not due to installed policy and filter data, for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsNonQosFiltersConsumed 1.3.6.1.4.1.45.4.7.1.8.7.1.7
Tracks the current number of filters (i.e., rules) in-use, not due to installed filter data, for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsNonQosMetersConsumed 1.3.6.1.4.1.45.4.7.1.8.7.1.8
Tracks the current number of meters in-use, not due to installed policy data, for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsCountersConsumed 1.3.6.1.4.1.45.4.7.1.8.7.1.9
Tracks the current number of counters in-use for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsTotalKeysAvail 1.3.6.1.4.1.45.4.7.1.8.7.1.10
Tracks the total number of classification keys available for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsTotalFiltersAvail 1.3.6.1.4.1.45.4.7.1.8.7.1.11
Tracks the total number of filters (i.e., rules) available for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsTotalMetersAvail 1.3.6.1.4.1.45.4.7.1.8.7.1.12
Tracks the total number of meters available for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsTotalCountersAvail 1.3.6.1.4.1.45.4.7.1.8.7.1.13
Tracks the total number of counters available for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsRangeChkElemsConsumed 1.3.6.1.4.1.45.4.7.1.8.7.1.14
Tracks the number of range check elements currently consumed for a given precedence level and interface. Note that range check resources may be centrally allocated (not interface-based) meaning that the resource usage data may be the same across the precedence levels/interfaces that share the resource.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsApplicationIdUsed 1.3.6.1.4.1.45.4.7.1.8.7.1.15
Tracks the Id of application in-use for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyPrecResDiagsApplicationNameUsed 1.3.6.1.4.1.45.4.7.1.8.7.1.16
The name of application in-use for a given precedence level and interface.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnQosPolicyPrecResDiagsRangeChkElemsAvail 1.3.6.1.4.1.45.4.7.1.8.7.1.17
Tracks the total number of range check elements available for a given port cluster.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosInterfaceClasses 1.3.6.1.4.1.45.4.7.1.9
OBJECT IDENTIFIER    

ntnQosIfAssignmentTable 1.3.6.1.4.1.45.4.7.1.9.1
Contains interface index to interface role combination associations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosIfAssignmentEntry

ntnQosIfAssignmentEntry 1.3.6.1.4.1.45.4.7.1.9.1.1
A conceptual row in the ntnQosIfAssignmentTable. Each row identifies an interface value that corresponds to an entry in the ifTable (MIB-II) and a role combination with which the interface is associated.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosIfAssignmentEntry  

ntnQosIfAssignmentIfIndex 1.3.6.1.4.1.45.4.7.1.9.1.1.1
The ifIndex value that is associated with this instance of the ntnQosIfAssignmentEntry. The ifIndex value of this attribute must correspond to the ifTable entry with the same ifIndex value.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntnQosIfAssignmentRoleCombination 1.3.6.1.4.1.45.4.7.1.9.1.1.2
The role combination that is associated with the interface with an ifIndex value that is equal to ntnQosIfAssignmentIfIndex.
Status: current Access: read-create
OBJECT-TYPE    
  RoleCombination  

ntnQosIfAssignmentQueueSet 1.3.6.1.4.1.45.4.7.1.9.1.1.3
The queue set associated with this interface. A queue set must be defined in the ntnQosIfQueueTable prior to being referenced by this attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

ntnQosIfAssignmentStorage 1.3.6.1.4.1.45.4.7.1.9.1.1.4
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosIfAssignmentStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosIfAssignmentStatus 1.3.6.1.4.1.45.4.7.1.9.1.1.5
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosIfAssignmentCapabilities 1.3.6.1.4.1.45.4.7.1.9.1.1.6
An enumeration of interface capabilities. Used by the PDP or network manager to select which policies and configuration it should push to the PEP. Also used to derive the capabilities that are common across several interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  BITS other(0), inputIpClassification(1), outputIpClassification(2), input802Classification(3), output802Classification(4), inputSystemClassification(5), outputSystemClassification(6), meteringRate1023(7), meteringRate16383(8), meteringBucket512K(9), meteringBucket8192K(10), meteringGranularity64Kbps(11), meteringGranularity1000Kbps(12), shapingRate1023(13), shapingRate16383(14), shapingBucket512K(15), shapingBucket8192K(16), shapingGranularity64Kbps(17), shapingGranularity1000Kbps(18), actionIPv6Remarking(19), meteringTypeSimpleTb(20), meteringTypeSrTcm(21), meteringTypeTrTcm(22), shapingTypeInterface(23), shapingTypeCos(24), version1Caps(25), version2Caps(26), meteringRate32767(27), shapingRate32767(28), meteringBucket16384K(29), shapingBucket16384K(30), dappSupport(31)  

ntnQosIfQueueTable 1.3.6.1.4.1.45.4.7.1.9.2
Contains information about the individual queues that comprise a queue set implemented on the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosIfQueueEntry

ntnQosIfQueueEntry 1.3.6.1.4.1.45.4.7.1.9.2.1
A conceptual row in the ntnQosIfQueueTable. Each row identifies a specific queue within a given queue set and contains detailed information about the queue. Queues are associated with a given set through this table and a queue set is associated with an interface through the ntnQosIfAssignmentTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosIfQueueEntry  

ntnQosIfQueueId 1.3.6.1.4.1.45.4.7.1.9.2.1.1
An index that uniquely identifies an entry in the ntnQosIfQueueTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosIfQueueSetId 1.3.6.1.4.1.45.4.7.1.9.2.1.2
An index that uniquely identifies a specific queue set. The queue set that is identified with this value is associated with an interface through the ntnQosIfAssignmentQueueSet object in the ntnQosIfAssignmentTable. The individual queues that are members of this set all have the same value for this attribute (i.e., they have the same set ID).
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

ntnQosIfQueueIndex 1.3.6.1.4.1.45.4.7.1.9.2.1.3
An arbitrary index that uniquely identifies a specific queue within a set of queues that is identified by the ntnQosIfQueueSetId value.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..255  

ntnQosIfQueueDiscipline 1.3.6.1.4.1.45.4.7.1.9.2.1.4
This object identifies the queuing discipline that is associated with the specified queue. A value of fifo(1) indicates that the queue is serviced on a first-in-first-out (FIFO) basis. This discipline is generally employed when only a single queue is available for a given interface. A value of pq(2) indicates that the queue is serviced using a priority queuing discipline. This technique is used when several queues are available for a given interface. Each queue is assigned a priority and queues are serviced in order of priority. Higher priority queues are completely drained before lower priority queues are serviced. A value of fq(3) indicates that the queue is serviced using a fair queuing discipline. This technique is used when several queues are available for a given interface. Each queue is treated equally and is serviced in a round-robin fashion. A value of wfq(4) indicates that the queue is serviced using a weighted fair queuing discipline. This technique is used when several queues are available for a given interface. Each queue is serviced based on queue weights which determine the scheduling and frequency of queue servicing. Queues that are assigned a greater weight are implicitly provided with more bandwidth. A value of wrr(5) indicates that the queue is serviced using a weighted round robin discipline. This technique is used when several queues are available for a given interface. Each queue is serviced based on queue weights which determine the scheduling and frequency of queue servicing. Queues that are assigned a greater weight are implicitly provided with more bandwidth. Note that the processing disciplines for all of the queues in a given set must be considered when trying to establish a processing profile for a given interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER fifo(1), pq(2), fq(3), wfq(4), wrr(5)  

ntnQosIfQueueDrainSize 1.3.6.1.4.1.45.4.7.1.9.2.1.5
The maximum number of bytes that may be drained from the queue in one cycle. The percentage of the interface bandwidth allocated to this queue can be calculated from this attribute and the sum of the drain sizes of all the queues in a specific queue cluster in a queue set. This attribute represents the relative bandwidth that is available to a given queue with respect to other queues with which it is associated. The absolute bandwidth that is available to a given queue is specified by the attribute ntnQosIfQueueAbsBandwidth. Which of these two applies is specified by the attribute ntnQosIfQueueBandwidthAllocation.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnQosIfQueueAbsBandwidth 1.3.6.1.4.1.45.4.7.1.9.2.1.6
The maximum interface bandwidth that is available for consumption when servicing this queue. This bandwidth is specified in terms of kilobits per second. This attribute represents the absolute bandwidth that is available to a given queue. The relative bandwidth that is available to a given queue, with respect to other queues with which it is associated, is specified by the attribute ntnQosIfQueueDrainSize. Which of these two applies is specified by the attribute ntnQosIfQueueBandwidthAllocation.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnQosIfQueueBandwidthAllocation 1.3.6.1.4.1.45.4.7.1.9.2.1.7
This attribute specifies whether to configure the queue for an absolute bandwidth limit or one that is relative to other queues of the interface. i.e., whether to configure the queue using ntnQosIfQueueAbsBandwidth or ntnQosIfQueueDrainSize.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER absolute(1), relative(2)  

ntnQosIfQueueServiceOrder 1.3.6.1.4.1.45.4.7.1.9.2.1.8
This object is used to provide an additional level of priority that is required for certain queuing disciplines and when the different queues that comprise a queue set are serviced using a mix of queuing disciplines. This object can be used to specify, for example, the order in which queues will be serviced when priority queuing is used. It also supports the ability to describe the servicing hierarchy when a hybrid queuing scheme, such as priority queuing coupled with weighted fair queuing, is used. Queue service priority is assigned such that a lower service order value indicates a higher priority. For example, a priority queue with a value of 1 will be serviced (i.e., drained) before another priority queue with a service order value of 2. Note that multiple queues that are logically associated, based on the queuing discipline that is being employed, will be assigned the same service order value. Under this scenario, other parameters that are related to the queuing discipline determine the order of queue servicing (e.g., queue drain size is used for 'wfq'). For example, an interface that is associated with a queue set supporting two priority queues and three queues that are serviced using WFQ would be modeled as follows: Q Index Q Discipline Q Drain Size Q Service Order 22 pq(1) - 1 23 pq(1) - 2 24 wfq(3) 500 3 25 wfq(3) 350 3 26 wfq(3) 150 3 The queue set presented in this example would service all queued traffic in queue 22 first, followed by all of the queued traffic in queue 23. Next the queued traffic in queues 24 through 26 would be serviced in a round robin fashion with queue 24 receiving 50% of the available bandwidth, queue 25 receiving 35% of the available bandwidth and queue 26 receiving 15% of the available bandwidth. This example is presented for expository purposes and has been simplified accordingly. Note that, in this example, queues 24, 25 and 26 form a queue cluster. Members of a queue cluster are all assigned the same ntnQosIfQueueServiceOrder as there are tightly coupled. The ntnQosIfQueueDrainSize attribute is used to determine the additional processing characteristics of the individual queues in a cluster.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..255  

ntnQosIfQueueSize 1.3.6.1.4.1.45.4.7.1.9.2.1.9
The size of the queue in bytes. Some devices set queue size in terms of packets. These devices must calculate the queue size in packets by assuming an average packet size suitable for the particular interface. Some devices have a fixed size buffer to be shared among all queues. These devices must allocate a fraction of the total buffer space to this queue calculated as the the ratio of the queue size to the sum of the queue sizes for the interface.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

ntnQosIfQueueStorage 1.3.6.1.4.1.45.4.7.1.9.2.1.10
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosIfQueueStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosIfQueueStatus 1.3.6.1.4.1.45.4.7.1.9.2.1.11
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosInterfaceRoleNextFree 1.3.6.1.4.1.45.4.7.1.9.3
This object contains an unused value for ntnQosInterfaceRoleId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosInterfaceRoleTable 1.3.6.1.4.1.45.4.7.1.9.4
Interface role definitions. This class describes the interface roles that exist on the device. An interface role is denoted by its designated role identifier.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosInterfaceRoleEntry

ntnQosInterfaceRoleEntry 1.3.6.1.4.1.45.4.7.1.9.4.1
An instance of this class describes the characteristics of an interface role. Interface role characteristics include a role identifier, an interface class designation and a filter capabilities attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosInterfaceRoleEntry  

ntnQosInterfaceRoleId 1.3.6.1.4.1.45.4.7.1.9.4.1.1
An arbitrary integer index that uniquely identifies a instance of the ntnQosInterfaceRole class. Class instances may not be contiguous.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosInterfaceRoleRole 1.3.6.1.4.1.45.4.7.1.9.4.1.2
The role that is used to identify interfaces with the characteristics specified by the attributes of this class instance. Interface role combination identifiers are used within a number of classes to logically identify a physical set of interfaces to which policy rules and actions are applied. Role combinations are comprised of one or more roles defined in this table. Role identifiers must exist in this table prior to being referenced in other class instances.
Status: current Access: read-create
OBJECT-TYPE    
  Role  

ntnQosInterfaceRoleIfClass 1.3.6.1.4.1.45.4.7.1.9.4.1.3
A value describing the overall classification of traffic received on interfaces with the given role. Traffic received on trusted interfaces may be processed differently and be subject to different restrictions that traffic received on non-trusted interfaces. The treatment of traffic based on interface class is implementation dependent.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER trusted(1), nonTrusted(2), unrestricted(3), untrustedv4v6(4), untrustedBasic(5)  

ntnQosInterfaceRoleCapabilities 1.3.6.1.4.1.45.4.7.1.9.4.1.4
An enumeration of interface capabilities. Used by the PDP or network manager to select which policies and configuration it should push to the PEP.
Status: current Access: read-create
OBJECT-TYPE    
  BITS other(0), inputIpClassification(1), outputIpClassification(2), input802Classification(3), output802Classification(4), inputSystemClassification(5), outputSystemClassification(6), meteringRate1023(7), meteringRate16383(8), meteringBucket512K(9), meteringBucket8192K(10), meteringGranularity64Kbps(11), meteringGranularity1000Kbps(12), shapingRate1023(13), shapingRate16383(14), shapingBucket512K(15), shapingBucket8192K(16), shapingGranularity64Kbps(17), shapingGranularity1000Kbps(18), actionIPv6Remarking(19), meteringTypeSimpleTb(20), meteringTypeSrTcm(21), meteringTypeTrTcm(22), shapingTypeInterface(23), shapingTypeCos(24), version1Caps(25), version2Caps(26), meteringRate32767(27), shapingRate32767(28), meteringBucket16384K(29), shapingBucket16384K(30)  

ntnQosInterfaceRoleStorageType 1.3.6.1.4.1.45.4.7.1.9.4.1.5
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosInterfaceRoleStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosInterfaceRoleStatus 1.3.6.1.4.1.45.4.7.1.9.4.1.6
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosInterfaceRoleStatsTrackingType 1.3.6.1.4.1.45.4.7.1.9.4.1.7
The value of this attribute determines if statistics tracking is enabled for system-level policies associated with the designated role. The ntnQosConfigTrackStatistics attribute value at the time the role is created provides the default value for this object.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), individual(2), aggregate(3)  

ntnQosUserRoleTable 1.3.6.1.4.1.45.4.7.1.9.5
User role definitions. This class describes the user roles that exist on the device. User roles associate a user and role with a single interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosUserRoleEntry

ntnQosUserRoleEntry 1.3.6.1.4.1.45.4.7.1.9.5.1
An instance of this class describes the characteristics of an user role. User role characteristics include a role combination, a user and group name and user session attributes, such as a session identifier and a session initiation timestamp.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosUserRoleEntry  

ntnQosUserRoleIfIndex 1.3.6.1.4.1.45.4.7.1.9.5.1.1
The ifIndex value that is associated with this instance of the ntnQosUserRoleEntry. The ifIndex value of this attribute must correspond to an ifTable entry with the same ifIndex value.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntnQosUserRoleRoleCombination 1.3.6.1.4.1.45.4.7.1.9.5.1.2
The role combination that is associated with the interface with an ifIndex value that is equal to ntnQosUserRoleIfIndex and the user identified by the ntnQosUserRoleUserName attribute. A user role combination is used to logically identify a physical interface to which policy rules and actions can be applied. The role combination string must be unique from any other role combinations defined in system.
Status: current Access: read-create
OBJECT-TYPE    
  RoleCombination  

ntnQosUserRoleUserName 1.3.6.1.4.1.45.4.7.1.9.5.1.3
The user name identifying the user that is currently associated with this user role (i.e., ifIndex and role combination) information.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..255)  

ntnQosUserRoleUserGroup 1.3.6.1.4.1.45.4.7.1.9.5.1.4
The user group with which the user, identified by the ntnQosUserRoleUserName attribute, is associated.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

ntnQosUserRoleSessionId 1.3.6.1.4.1.45.4.7.1.9.5.1.5
The system-assigned session identifier used to track instances of this user role entry (i.e., the user role entry for a specific interface and user).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosUserRoleSessionStart 1.3.6.1.4.1.45.4.7.1.9.5.1.6
The system-assigned session start timestamp. The value of this attribute corresponds to the value of the sysUpTime attribute, coverted to seconds, at the instant that this user role entry is created and/or updated.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosUserRoleSessionGroup 1.3.6.1.4.1.45.4.7.1.9.5.1.7
The system-assigned session group identifier. Multiple user sessions belong to the same group if they share the same role combination and have the same value for this attribute. This session group value is associated with installed policy criteria to unambiguously identify the users and interfaces to which QoS policy is being applied.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosUserRoleStorage 1.3.6.1.4.1.45.4.7.1.9.5.1.8
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosUserRoleStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosUserRoleStatus 1.3.6.1.4.1.45.4.7.1.9.5.1.9
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosIfShapingTable 1.3.6.1.4.1.45.4.7.1.9.6
Identifies shaping criteria that is to be applied to a specific interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosIfShapingEntry

ntnQosIfShapingEntry 1.3.6.1.4.1.45.4.7.1.9.6.1
A conceptual row in the ntnQosIfShapingTable. Each row identifies an interface value that corresponds to an entry in the ifTable (MIB-II) and shaping criteria with which the interface is associated.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosIfShapingEntry  

ntnQosIfShapingIfIndex 1.3.6.1.4.1.45.4.7.1.9.6.1.1
The ifIndex value that is associated with this instance of the ntnQosIfShapingEntry. The ifIndex value of this attribute must correspond to the ifTable entry with the same ifIndex value.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntnQosIfShapingSpecific 1.3.6.1.4.1.45.4.7.1.9.6.1.2
This indicates the shaping behavior to be applied by pointing to an entry containing detailed parameters. Note that entries in that specific table must be managed explicitly. For example, ntnQosIfShapingSpecific may point to an entry in ntnQosTBParamTable, which contains an instance of a single set of Token Bucket parameters. Entries in other tables must exist prior to being referenced. It may be permissible to create component table entries and the entries being referenced in the same request. Referenced entries may not be deleted while still referenced by an active entry in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowPointer  

ntnQosIfShapingLabel 1.3.6.1.4.1.45.4.7.1.9.6.1.3
A label used to reference the interface shaping data in a textual manner.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnQosIfShapingStorage 1.3.6.1.4.1.45.4.7.1.9.6.1.4
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosIfShapingStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosIfShapingStatus 1.3.6.1.4.1.45.4.7.1.9.6.1.5
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosCosShapingTable 1.3.6.1.4.1.45.4.7.1.9.7
Identifies shaping criteria that is to be applied to a specific interface's CoS queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosCosShapingEntry

ntnQosCosShapingEntry 1.3.6.1.4.1.45.4.7.1.9.7.1
A conceptual row in the ntnQosCosShapingTable. Each row identifies an interface value that corresponds to an entry in the ifTable (MIB-II), a CoS value and shaping criteria with which the interface-CoS tuple is associated.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosCosShapingEntry  

ntnQosCosShapingIfIndex 1.3.6.1.4.1.45.4.7.1.9.7.1.1
The ifIndex value that is associated with this instance of the ntnQosCosShapingEntry. The ifIndex value of this attribute must correspond to the ifTable entry with the same ifIndex value.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntnQosCosShapingCos 1.3.6.1.4.1.45.4.7.1.9.7.1.2
The IEEE 802 CoS value that is associated with this instance of the ntnQosCosShapingEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  QosIeee802Cos  

ntnQosCosShapingSpecific 1.3.6.1.4.1.45.4.7.1.9.7.1.3
This indicates the shaping behavior to be applied by pointing to an entry containing detailed parameters. Note that entries in that specific table must be managed explicitly. For example, ntnQosCosShapingSpecific may point to an entry in ntnQosTBParamTable, which contains an instance of a single set of Token Bucket parameters. Entries in other tables must exist prior to being referenced. It may be permissible to create component table entries and the entries being referenced in the same request. Referenced entries may not be deleted while still referenced by an active entry in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowPointer  

ntnQosCosShapingLabel 1.3.6.1.4.1.45.4.7.1.9.7.1.4
A label used to reference the CoS shaping data in a textual manner.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnQosCosShapingStorage 1.3.6.1.4.1.45.4.7.1.9.7.1.5
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosCosShapingStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosCosShapingStatus 1.3.6.1.4.1.45.4.7.1.9.7.1.6
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosQueueShapingTable 1.3.6.1.4.1.45.4.7.1.9.8
Identifies shaping criteria that is to be applied to a specific interface's egress queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosQueueShapingEntry

ntnQosQueueShapingEntry 1.3.6.1.4.1.45.4.7.1.9.8.1
A conceptual row in the ntnQosQueueShapingTable. Each row identifies an interface value that corresponds to an entry in the ifTable (MIB-II), a queue identifier and shaping criteria with which the interface-queue tuple is associated.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosQueueShapingEntry  

ntnQosQueueShapingIfIndex 1.3.6.1.4.1.45.4.7.1.9.8.1.1
The ifIndex value that is associated with this instance of the ntnQosQueueShapingEntry. The ifIndex value of this attribute must correspond to the ifTable entry with the same ifIndex value.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntnQosQueueShapingQueue 1.3.6.1.4.1.45.4.7.1.9.8.1.2
The specific queue, within the queue set that is associated with the interface identified by the ntnQosQueueShapingIfIndex value, on which traffic is to be shaped. The value of this attribute corresponds to the ntnQosIfQueueIndex for the specified queue within the queue set (defined in the ntnQosIfQueueTable). The range of acceptable values for this attribute is dictated by the current queue set parameters for the system, as defined by the QoS configuration attribute ntnQosConfigDefaultQueueCfg.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..255  

ntnQosQueueShapingSpecific 1.3.6.1.4.1.45.4.7.1.9.8.1.3
This indicates the shaping behavior to be applied by pointing to an entry containing detailed parameters. Note that entries in that specific table must be managed explicitly. For example, ntnQosQueueShapingSpecific may point to an entry in ntnQosTBParamTable, which contains an instance of a single set of Token Bucket parameters. Entries in other tables must exist prior to being referenced. It may be permissible to create component table entries and the entries being referenced in the same request. Referenced entries may not be deleted while still referenced by an active entry in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowPointer  

ntnQosQueueShapingLabel 1.3.6.1.4.1.45.4.7.1.9.8.1.4
A label used to reference the queue shaping data in a textual manner.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnQosQueueShapingStorage 1.3.6.1.4.1.45.4.7.1.9.8.1.5
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosQueueShapingStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosQueueShapingStatus 1.3.6.1.4.1.45.4.7.1.9.8.1.6
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosMappingClasses 1.3.6.1.4.1.45.4.7.1.10
OBJECT IDENTIFIER    

ntnQosDscpToCosTable 1.3.6.1.4.1.45.4.7.1.10.1
Maps each DSCP to an IEEE COS value.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosDscpToCosEntry

ntnQosDscpToCosEntry 1.3.6.1.4.1.45.4.7.1.10.1.1
An instance of the ntnQosDscpToCos class. A total of 64 class instances are constantly maintained (i.e., entries may be modified but not added or deleted) in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosDscpToCosEntry  

ntnQosDscpToCosId 1.3.6.1.4.1.45.4.7.1.10.1.1.1
A unique identifier for this DSCP-to-COS mapping.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosDscpToCosDscp 1.3.6.1.4.1.45.4.7.1.10.1.1.2
The DSCP attribute that is used to determine the appropriate Layer 2 COS value for mapping purposes. DSCP values 0 through 63 (inclusive) are maintained in the table.
Status: current Access: read-create
OBJECT-TYPE    
  Dscp  

ntnQosDscpToCosCos 1.3.6.1.4.1.45.4.7.1.10.1.1.3
The IEEE 802 COS value to use when mapping the DSCP value specified by the ntnQosDscpToCosDscp attribute to a IEEE 802 COS.
Status: current Access: read-create
OBJECT-TYPE    
  QosIeee802Cos  

ntnQosDscpToCosDropPrec 1.3.6.1.4.1.45.4.7.1.10.1.1.4
The relative drop precedence value to use when mapping the DSCP value specified by the ntnQosDscpToCosDscp attribute to a drop precedence. During times of congestion, packets with a hign drop precedence are discarded before those with a low drop precedence.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER lowDropPrec(1), highDropPrec(2)  

ntnQosDscpToCosLabel 1.3.6.1.4.1.45.4.7.1.10.1.1.5
A label used to logically identify the mapping.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

ntnQosDscpToCosStorage 1.3.6.1.4.1.45.4.7.1.10.1.1.6
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosDscpToCosStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosDscpToCosStatus 1.3.6.1.4.1.45.4.7.1.10.1.1.7
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosDscpToCosNewDscp 1.3.6.1.4.1.45.4.7.1.10.1.1.8
Specifies a new DSCP value to be used when DSCP mutation (i.e., translation) is required.
Status: current Access: read-create
OBJECT-TYPE    
  Dscp  

ntnQosCosToDscpTable 1.3.6.1.4.1.45.4.7.1.10.2
Maps each of eight Layer 2 COS values to a DSCP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosCosToDscpEntry

ntnQosCosToDscpEntry 1.3.6.1.4.1.45.4.7.1.10.2.1
An instance of the ntnQosCosToDscp class. A total of 8 class instances are constantly maintained (i.e., entries may be modified but not added or deleted) in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosCosToDscpEntry  

ntnQosCosToDscpId 1.3.6.1.4.1.45.4.7.1.10.2.1.1
A unique identifier for this COS-to-DSCP mapping.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosCosToDscpCos 1.3.6.1.4.1.45.4.7.1.10.2.1.2
The Layer 2 COS class instance attribute that is used to determine the appropriate DSCP mappings. COS values 0 through 7 (inclusive) are maintained in the table.
Status: current Access: read-create
OBJECT-TYPE    
  QosIeee802Cos  

ntnQosCosToDscpDscp 1.3.6.1.4.1.45.4.7.1.10.2.1.3
The DSCP value to use when mapping the Layer 2 COS value specified by the ntnQosCosToDscpCos attribute to a DSCP.
Status: current Access: read-create
OBJECT-TYPE    
  Dscp  

ntnQosCosToDscpLabel 1.3.6.1.4.1.45.4.7.1.10.2.1.4
A label used to logically identify the mapping.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

ntnQosCosToDscpStorage 1.3.6.1.4.1.45.4.7.1.10.2.1.5
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosCosToDscpStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosCosToDscpStatus 1.3.6.1.4.1.45.4.7.1.10.2.1.6
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosMappingClassesScalars 1.3.6.1.4.1.45.4.7.1.10.3
OBJECT IDENTIFIER    

ntnQosMappingRestoreDefault 1.3.6.1.4.1.45.4.7.1.10.3.1
The object is used to restore factory default values for the ntnQosDscpToCosTable and the ntnQosCosToDscpTable. Setting the object to dscpToCos(2) will restore the ntnQosDscpToCosTable to its factory default state, and will restore the value of ntnQosMappingDscpToCosEnabled to its factory default value. Setting the object to cosToDscp(2) will restore the ntnQosCosToDscpTable to its factory default state, and will restore the value of ntnQosMappingCosToDscpEnabled to its factory default value. Setting the value to other(1) has no effect. The value when retrieved is always other(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), dscpToCos(2), cosToDscp(3)  

ntnQosMappingDscpToCosEnabled 1.3.6.1.4.1.45.4.7.1.10.3.2
This object controls whether the ntnQosDscpToCosTable is enabled. If the value is false(2), any configuration in that table will be ignored.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntnQosMappingCosToDscpEnabled 1.3.6.1.4.1.45.4.7.1.10.3.3
This object controls whether the ntnQosCosToDscpTable is enabled. If the value is false(2), any configuration in that table will be ignored.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntnQosPolicyAgtClasses 1.3.6.1.4.1.45.4.7.1.11
OBJECT IDENTIFIER    

ntnQosPrcSupportTable 1.3.6.1.4.1.45.4.7.1.11.1
Each instance of this class specifies a PRC that the device supports and a bit string to indicate the attributes of the class that are supported.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosPrcSupportEntry

ntnQosPrcSupportEntry 1.3.6.1.4.1.45.4.7.1.11.1.1
An instance of the ntnQosPrcSupport class that identifies a specific policy class and associated attributes as supported by the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosPrcSupportEntry  

ntnQosPrcSupportId 1.3.6.1.4.1.45.4.7.1.11.1.1.1
An arbitrary integer index that uniquely identifies an instance of the ntnQosPrcSupport class.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosPrcSupportSupportedPrc 1.3.6.1.4.1.45.4.7.1.11.1.1.2
The object identifier of a supported PRC. There may not be more than one instance of the ntnQosPrcSupport class with the same value of ntnQosPrcSupportSupportedPrc.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

ntnQosPrcSupportSupportedAttrs 1.3.6.1.4.1.45.4.7.1.11.1.1.3
A bit string representing the supported attributes of the class that is identified by the ntnQosPrcSupportSupportedPrc object. Each bit of this bit mask corresponds to a class attribute, with the most significant bit of the i-th octet of this octet string corresponding to the (8*i - 7)-th attribute, and the least significant bit of the i-th octet corresponding to the (8*i)-th class attribute. Each bit of this bit mask specifies whether or not the corresponding class attribute is currently supported, with a '1' indicating support and a '0' indicating no support. If the value of this bit mask is N bits long and there are more than N class attributes then the bit mask is logically extended with 0's to the required length.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

ntnQosPrcSupportMaxPris 1.3.6.1.4.1.45.4.7.1.11.1.1.4
A non-negative value indicating the maximum numbers of policy rule instances that can be installed in the identified policy rule class. Note that actual number of instances that can be installed in a PRC at any given time may be less than this value based on the current operational state (e.g., resources currently consumed) of the device.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPrcSupportCurrentPris 1.3.6.1.4.1.45.4.7.1.11.1.1.5
The current numbers of class instances.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosPolicyDeviceIdentTable 1.3.6.1.4.1.45.4.7.1.11.2
This class contains a single policy rule instance that contains device-specific information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosPolicyDeviceIdentEntry

ntnQosPolicyDeviceIdentEntry 1.3.6.1.4.1.45.4.7.1.11.2.1
An instance of the ntnQosPolicyDeviceIdent class. Only one instance of this policy class is ever instantiated.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosPolicyDeviceIdentEntry  

ntnQosPolicyDeviceIdentId 1.3.6.1.4.1.45.4.7.1.11.2.1.1
An index to uniquely identify an instance of this policy class.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosPolicyDeviceIdentDescr 1.3.6.1.4.1.45.4.7.1.11.2.1.2
A textual description of the policy agent. This value should include the name and version identification of the policy agent hardware and software.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

ntnQosPolicyDeviceIdentMaxMsg 1.3.6.1.4.1.45.4.7.1.11.2.1.3
The maximum message size, in octets, that the device is capable of processing.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosInterfaceTypeNextFree 1.3.6.1.4.1.45.4.7.1.12
This object contains an unused value for ntnQosInterfaceTypeId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosApplicationClasses 1.3.6.1.4.1.45.4.7.1.13
OBJECT IDENTIFIER    

ntnQosDsAccessElemNextFree 1.3.6.1.4.1.45.4.7.1.13.1
This object contains an unused value for ntnQosDsAccessElemId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosDsAccessElemTable 1.3.6.1.4.1.45.4.7.1.13.2
A table of IP access elements that a system may use to identify and manipulate IP traffic.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosDsAccessElemEntry

ntnQosDsAccessElemEntry 1.3.6.1.4.1.45.4.7.1.13.2.1
An IP access element entry describes a single filter and one or more actions.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosDsAccessElemEntry  

ntnQosDsAccessElemId 1.3.6.1.4.1.45.4.7.1.13.2.1.1
An index that enumerates the access element entries. Managers can obtain new values for row creation in this table by reading ntnQosDsAccessElemNextFree.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosDsAccessElemAddrType 1.3.6.1.4.1.45.4.7.1.13.2.1.2
The type of IP address used by this access element entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can only look at packets on the wire. Therefore, this object is limited to IPv4 and IPv6 addresses.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

ntnQosDsAccessElemDstAddr 1.3.6.1.4.1.45.4.7.1.13.2.1.3
The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnQosDsAccessElemDstPrefixLength indicates the number of bits that are relevant.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

ntnQosDsAccessElemDstPrefixLength 1.3.6.1.4.1.45.4.7.1.13.2.1.4
The length of the CIDR Prefix carried in ntnQosDsAccessElemDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength  

ntnQosDsAccessElemSrcAddr 1.3.6.1.4.1.45.4.7.1.13.2.1.5
The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnQosDsAccessElemSrcPrefixLength indicates the number of bits that are relevant.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

ntnQosDsAccessElemSrcPrefixLength 1.3.6.1.4.1.45.4.7.1.13.2.1.6
The length of the CIDR Prefix carried in ntnQosDsAccessElemSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength  

ntnQosDsAccessElemDscp 1.3.6.1.4.1.45.4.7.1.13.2.1.7
The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP values are considered a match.
Status: current Access: read-create
OBJECT-TYPE    
  DscpOrAny  

ntnQosDsAccessElemFlowId 1.3.6.1.4.1.45.4.7.1.13.2.1.8
The flow identifier in an IPv6 header.
Status: current Access: read-create
OBJECT-TYPE    
  FlowIdOrAny  

ntnQosDsAccessElemProtocol 1.3.6.1.4.1.45.4.7.1.13.2.1.9
The IP protocol to match against the IPv4 protocol number or the IPv6 Next-Header number in the packet. A value of 255 means match all. Note the protocol number of 255 is reserved by IANA, and Next-Header number of 0 is used in IPv6.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

ntnQosDsAccessElemDstL4PortMin 1.3.6.1.4.1.45.4.7.1.13.2.1.10
The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

ntnQosDsAccessElemDstL4PortMax 1.3.6.1.4.1.45.4.7.1.13.2.1.11
The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in ntnQosDsAccessElemDstL4PortMin.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

ntnQosDsAccessElemSrcL4PortMin 1.3.6.1.4.1.45.4.7.1.13.2.1.12
The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

ntnQosDsAccessElemSrcL4PortMax 1.3.6.1.4.1.45.4.7.1.13.2.1.13
The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in ntnQosDsAccessElemSrcL4PortMin.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

ntnQosDsAccessElemActionDrop 1.3.6.1.4.1.45.4.7.1.13.2.1.14
This action attribute is used to specify whether a packet should dropped or switched (i.e., not dropped). The value 'drop(1)', when specified, will cause the packet being evaluated to be dropped. A value of 'pass(2)' indicates that this packet should not be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER drop(1), pass(2)  

ntnQosDsAccessElemActionRemarkDscp 1.3.6.1.4.1.45.4.7.1.13.2.1.15
This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram to be updated with the value of this object. A value of -1 indicates that the DSCP field should not be updated.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..63  

ntnQosDsAccessElemActionRemarkCos 1.3.6.1.4.1.45.4.7.1.13.2.1.16
This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated based on the value of this object. Specifying a value equal to 'ignore(9)' means that no action will be taken related to this attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER markAsPriority0(1), markAsPriority1(2), markAsPriority2(3), markAsPriority3(4), markAsPriority4(5), markAsPriority5(6), markAsPriority6(7), markAsPriority7(8), ignore(9)  

ntnQosDsAccessElemActionSetPrec 1.3.6.1.4.1.45.4.7.1.13.2.1.17
This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop precedence may be used to determine traffic precedence relative to other traffic being processed by the device and other implementation specific operations at the egress interface. A low value for the drop precedence equates to the traffic receiving a higher priority in terms of processing. In other words, when congestion is encountered, packets with a 'highDropPrec(2)' will be dropped before packets with a 'lowDropPrec(1)'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER lowDropPrec(1), highDropPrec(2)  

ntnQosDsAccessElemName 1.3.6.1.4.1.45.4.7.1.13.2.1.18
A label used to reference the access element in a textual manner. All related access elements (e.g., those that comprise an access-list) must have the same label.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

ntnQosDsAccessElemBlock 1.3.6.1.4.1.45.4.7.1.13.2.1.19
A label used to identify access elements that are members of the same classification block. Access elements are members of the same block if they share the same access element name (ntnQosDsAccessElemName attribute) and the same block name.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnQosDsAccessElemType 1.3.6.1.4.1.45.4.7.1.13.2.1.20
Identifies the DS access element type. Designates the higher-level application through which this entry was created.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dsAcl(1), dsAppClfr(2), dsMultimediaClfr(3), dsUserDefinedClfr(4)  

ntnQosDsAccessElemStorage 1.3.6.1.4.1.45.4.7.1.13.2.1.21
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosDsAccessElemStatus 1.3.6.1.4.1.45.4.7.1.13.2.1.22
The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosDsAccessElemEvalPrec 1.3.6.1.4.1.45.4.7.1.13.2.1.23
An evaluation order attribute used to order elements with the same name and to link elements across DS and L2 Access Element tables. Only used with NSNA applications.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

ntnQosL2AccessElemNextFree 1.3.6.1.4.1.45.4.7.1.13.3
This object contains an unused value for ntnQosL2AccessElemId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosL2AccessElemTable 1.3.6.1.4.1.45.4.7.1.13.4
A table of IEEE 802-based access elements that a system may use to identify and manipulate Layer 2 traffic.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosL2AccessElemEntry

ntnQosL2AccessElemEntry 1.3.6.1.4.1.45.4.7.1.13.4.1
A Layer 2 access element entry describes a single filter and one or more actions.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosL2AccessElemEntry  

ntnQosL2AccessElemId 1.3.6.1.4.1.45.4.7.1.13.4.1.1
An index that enumerates the access element entries. Managers can obtain new values for row creation in this table by reading ntnQosL2AccessElemNextFree.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosL2AccessElemDstAddr 1.3.6.1.4.1.45.4.7.1.13.4.1.2
The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical address specified by this object, taking into account address wildcarding as specified by the ntnQosL2AccessElemDstAddrMask object, are potentially subject to the processing guidelines that are associated with this entry through the related action class.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnQosL2AccessElemDstAddrMask 1.3.6.1.4.1.45.4.7.1.13.4.1.3
This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against the address specified in the ntnQosL2AccessElemDstAddr object. The value of this object represents a mask that is logically and'ed with the 802 DA in received frames to derive the value to be compared against the ntnQosL2AccessElemDstAddr address. A zero bit in the mask thus means that the corresponding bit in the address always matches. The ntnQosL2AccessElemDstAddr value must also be masked using this value prior to any comparisons. The length of this object in octets must equal the length in octets of the ntnQosL2AccessElemDstAddr. Note that a mask with no bits set (i.e., all zeroes) effectively wildcards the ntnQosL2AccessElemDstAddr object.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnQosL2AccessElemSrcAddr 1.3.6.1.4.1.45.4.7.1.13.4.1.4
The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches the physical address specified by this object, taking into account address wildcarding as specified by the ntnQosL2AccessElemSrcAddrMask object, are potentially subject to the processing guidelines that are associated with this entry through the related action class.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnQosL2AccessElemSrcAddrMask 1.3.6.1.4.1.45.4.7.1.13.4.1.5
This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison against the address specified in the ntnQosL2AccessElemSrcAddr object. The value of this object represents a mask that is logically and'ed with the 802 MAC SA in received frames to derive the value to be compared against the ntnQosL2AccessElemSrcAddr address. A zero bit in the mask thus means that the corresponding bit in the address always matches. The ntnQosL2AccessElemSrcAddr value must also be masked using this value prior to any comparisons. The length of this object in octets must equal the length in octets of the ntnQosL2AccessElemSrcAddr. Note that a mask with no bits set (i.e., all zeroes) effectively wildcards the ntnQosL2AccessElemSrcAddr object.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnQosL2AccessElemVlanIdMin 1.3.6.1.4.1.45.4.7.1.13.4.1.6
The minimum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosL2AccessElemVlanIdMin value must be less than or equal to the ntnQosL2AccessElemVlanIdMax value. Setting the ntnQosL2AccessElemVlanIdMin object to 1 and the ntnQosL2AccessElemVlanIdMax to 4094 indicates that VLAN data should not be considered during traffic classification.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

ntnQosL2AccessElemVlanIdMax 1.3.6.1.4.1.45.4.7.1.13.4.1.7
The maximum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosL2AccessElemVlanIdMax value must be greater than or equal to the ntnQosL2AccessElemVlanIdMin value. Setting the ntnQosL2AccessElemVlanIdMin object to 1 and the ntnQosL2AccessElemVlanIdMax to 4094 indicates that VLAN data should not be considered during traffic classification.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

ntnQosL2AccessElemVlanTag 1.3.6.1.4.1.45.4.7.1.13.4.1.8
This object indicates the data link layer packet format that frames must have to match this L2 classifier entry. A value of 'untagged(1)' indicates that only frames received untagged will match this classifier component. A value of 'tagged(2)' means that only frames received tagged will be considered a match. A value of 'ignore(3)' means that the presence, or lack thereof, of a VLAN tag in the received packet will not be considered when determining whether a frame matches this classifier entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER untagged(1), tagged(2), ignore(3)  

ntnQosL2AccessElemEtherType 1.3.6.1.4.1.45.4.7.1.13.4.1.9
This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Example settings would include 'IP' (0x0800), 'ARP' (0x0806) and 'IPX' (0x8137). Setting the ntnQosL2AccessElemEtherType object to 0xFFFF indicates that EtherType data should not be considered during traffic classification. Note the EtherType value of 0xFFFF is reserved by IANA.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..ffff  

ntnQosL2AccessElemUserPriority 1.3.6.1.4.1.45.4.7.1.13.4.1.10
The 802.1p user priority value against which the value contained in the user priority field of a tagged 802.1 frame is compared. A test for equality is performed when determining if a match exists between the data in a data link layer frame and the value of this classifier. Setting the value of this object to 'matchAllPriorities(9)' causes all user priority values to match this attribute. This essentially makes any comparisons with regard to user priority values unnecessary.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER matchPriority0(1), matchPriority1(2), matchPriority2(3), matchPriority3(4), matchPriority4(5), matchPriority5(6), matchPriority6(7), matchPriority7(8), matchAllPriorities(9)  

ntnQosL2AccessElemActionDrop 1.3.6.1.4.1.45.4.7.1.13.4.1.11
This action attribute is used to specify whether a packet should dropped or switched (i.e., not dropped). The value 'drop(1)', when specified, will cause the packet being evaluated to be dropped. A value of 'pass(2)' indicates that this packet should not be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER drop(1), pass(2)  

ntnQosL2AccessElemActionRemarkDscp 1.3.6.1.4.1.45.4.7.1.13.4.1.12
This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram to be updated with the value of this object. A value of -1 indicates that the DSCP field should not be updated.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..63  

ntnQosL2AccessElemActionRemarkCos 1.3.6.1.4.1.45.4.7.1.13.4.1.13
This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated based on the value of this object. Specifying a value equal to 'ignore(9)' means that no action will be taken related to this attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER markAsPriority0(1), markAsPriority1(2), markAsPriority2(3), markAsPriority3(4), markAsPriority4(5), markAsPriority5(6), markAsPriority6(7), markAsPriority7(8), ignore(9)  

ntnQosL2AccessElemActionSetPrec 1.3.6.1.4.1.45.4.7.1.13.4.1.14
This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop precedence may be used to determine traffic precedence relative to other traffic being processed by the device and other implementation specific operations at the egress interface. A low value for the drop precedence equates to the traffic receiving a higher priority in terms of processing. In other words, when congestion is encountered, packets with a 'highDropPrec(2)' will be dropped before packets with a 'lowDropPrec(1)'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER lowDropPrec(1), highDropPrec(2)  

ntnQosL2AccessElemName 1.3.6.1.4.1.45.4.7.1.13.4.1.15
A label used to reference the access element in a textual manner. All related access elements (e.g., those that comprise an access-list) must have the same label.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

ntnQosL2AccessElemBlock 1.3.6.1.4.1.45.4.7.1.13.4.1.16
A label used to identify access elements that are members of the same classification block. Access elements are members of the same block if they share the same access element name (ntnQosDsAccessElemName attribute) and the same block name.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnQosL2AccessElemType 1.3.6.1.4.1.45.4.7.1.13.4.1.17
Identifies the L2 access element type. Designates the higher-level application through which this entry was created.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER l2Acl(1), l2AppClfr(2), l2MultimediaClfr(3), l2UserDefinedClfr(4)  

ntnQosL2AccessElemStorage 1.3.6.1.4.1.45.4.7.1.13.4.1.18
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosL2AccessElemStatus 1.3.6.1.4.1.45.4.7.1.13.4.1.19
The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosL2AccessElemEvalPrec 1.3.6.1.4.1.45.4.7.1.13.4.1.20
An evaluation order attribute used to order elements with the same name and to link elements across DS and L2 Access Element tables. Only used with NSNA applications.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

ntnQosAccessAsgnNextFree 1.3.6.1.4.1.45.4.7.1.13.5
This object contains an unused value for ntnQosAccessAsgnId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosAccessAsgnTable 1.3.6.1.4.1.45.4.7.1.13.6
A table of access assignments that are currently in place (i.e., access element/interface associations).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosAccessAsgnEntry

ntnQosAccessAsgnEntry 1.3.6.1.4.1.45.4.7.1.13.6.1
An access assignment entry describes an access element/interface association.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosAccessAsgnEntry  

ntnQosAccessAsgnId 1.3.6.1.4.1.45.4.7.1.13.6.1.1
An index that enumerates the access assignment entries. Managers can obtain new values for row creation in this table by reading ntnQosAccessAsgnNextFree.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosAccessAsgnAclType 1.3.6.1.4.1.45.4.7.1.13.6.1.2
Identifies the type of access element that is being referenced.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dsAcl(1), l2Acl(2), dsAppClfr(3), l2AppClfr(4), dsUserDefinedClfr(5), l2UserDefinedClfr(6), multimediaClfr(7), dsL2NsnaClfr(8), dsL2UbpClfr(9), dsL2TrafficProfile(10)  

ntnQosAccessAsgnName 1.3.6.1.4.1.45.4.7.1.13.6.1.3
A label used to reference an access assignment in a textual manner. This label, coupled with the access element type identifier attribute (ntnQosAccessAsgnAclType), uniquely identifies an access assignment entry.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

ntnQosAccessAsgnIfIndex 1.3.6.1.4.1.45.4.7.1.13.6.1.4
The interface to which the identified access element is to be applied, specified in terms of an ifIndex value. A value of 0 indicates that the entry represents a template that is used to facilitate entry creation for a specific interface based on certain events.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

ntnQosAccessAsgnRate 1.3.6.1.4.1.45.4.7.1.13.6.1.5
The token-bucket rate, in kilobits per second (kbps). This attribute is used for: CIR for Simple Token Bucket CIR in RFC 2697 for srTCM CIR in RFC 2698 for trTCM CTR in RFC 2859 for TSWTCM AverageRate in RFC 3290. A rate value equal to 0 indicates that no metering is being requested.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ntnQosAccessAsgnBurstSize 1.3.6.1.4.1.45.4.7.1.13.6.1.6
The maximum number of bytes in a single transmission burst. This attribute is used for: Token bucket size for Simple Token Bucket CBS in RFC 2697 for srTCM CBS in RFC 2698 for trTCM Burst Size in RFC 3290.
Status: current Access: read-create
OBJECT-TYPE    
  BurstSize  

ntnQosAccessAsgnOutActionDrop 1.3.6.1.4.1.45.4.7.1.13.6.1.7
This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The value 'drop(1)', when specified, will cause the packet being evaluated to be dropped. A value of 'pass(2)' indicates that this packet should not be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER drop(1), pass(2)  

ntnQosAccessAsgnOutActionRemarkDscp 1.3.6.1.4.1.45.4.7.1.13.6.1.8
This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram that is deemed to be out-of-profile to be updated with the value of this object. A value of -1 indicates that the DSCP field should not be updated.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..63  

ntnQosAccessAsgnOutActionRemarkCos 1.3.6.1.4.1.45.4.7.1.13.6.1.9
This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deemed to be out-of-profile to be updated based on the value of this object. Specifying a value equal to 'ignore(9)' means that no action will be taken related to this attribute. Specifying a value equal to 'deriveFromEgressDscp(10)' means that the value for this attribute will be assigned based on DSCP-to-user priority map information maintained in the system. The DSCP value specified for remarking in the ntnQosAccessAsgnOutActionRemarkDscp attribute will be used to determine the user priority. Specifying a value equal to 'deriveFromIngressTosPrec(11)' means that the value for this attribute will be assigned based on the value of the precedence bits in the IP Type-Of-Service (TOS) field, as defined in RFC 791. The eight precedence values, also referred to as Class Selector (CS) values, have a one-to-one correspondence with the eight 802.1p user priority values.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER markAsPriority0(1), markAsPriority1(2), markAsPriority2(3), markAsPriority3(4), markAsPriority4(5), markAsPriority5(6), markAsPriority6(7), markAsPriority7(8), ignore(9), deriveFromEgressDscp(10), deriveFromIngressTosPrec(11)  

ntnQosAccessAsgnOutActionSetPrec 1.3.6.1.4.1.45.4.7.1.13.6.1.10
This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop precedence may be used to determine traffic precedence relative to other traffic being processed by the device and other implementation specific operations at the egress interface. A low value for the drop precedence equates to the traffic receiving a higher priority in terms of processing. In other words, when congestion is encountered, packets with a 'highDropPrec(2)' will be dropped before packets with a 'lowDropPrec(1)'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER lowDropPrec(1), highDropPrec(2)  

ntnQosAccessAsgnStatsType 1.3.6.1.4.1.45.4.7.1.13.6.1.11
The type of statistics tracking used by this access assignment. The value of this attribute dictates the amount of statistics tracking resources (i.e., counters) consumed by this access assignment entry. A value of 'individualClfr(1)' means that separate counters will be allocated, space permitting, for each access element referenced by the assignment. A value of 'aggregateClfr(2)' means that a single counter will be used to accumulate the statistics data for all the classifiers referenced by the access assignment. A value of 'noStatsTracking(3)' means that no statistics tracking resources will be allocated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER individualClfr(1), aggregateClfr(2), noStatsTracking(3)  

ntnQosAccessAsgnStorage 1.3.6.1.4.1.45.4.7.1.13.6.1.12
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosAccessAsgnStatus 1.3.6.1.4.1.45.4.7.1.13.6.1.13
The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosAccessAsgnNonMatchActionDrop 1.3.6.1.4.1.45.4.7.1.13.6.1.14
This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The value 'drop(1)', when specified, will cause the packet being evaluated to be dropped. A value of 'pass(2)' indicates that this packet should not be dropped. A value of 'defer(3)' indicates that no explicit drop/pass action has been specified (i.e., no-op).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER drop(1), pass(2), defer(3)  

ntnQosAccessAsgnMeterType 1.3.6.1.4.1.45.4.7.1.13.6.1.15
The metering algorithm associated with the rate and burst parameters. The number and type of algorithms supported is implementation dependent. Potential algorithms include: ntnQosTBParamSimpleTokenBucket ntnQosTBParamSrTCMBlind ntnQosTBParamSrTCMAware ntnQosTBParamTrTCMBlind ntnQosTBParamTrTCMAware An OBJECT-IDENTITY for each of these algorithms is defined in this module. Additional values may be specified as needed.
Status: current Access: read-create
OBJECT-TYPE    
  AutonomousType  

ntnQosAccessAsgnSecondaryRate 1.3.6.1.4.1.45.4.7.1.13.6.1.16
The token-bucket rate, in kilobits per second (kbps). This attribute is used for: PIR in RFC 2698 for trTCM A rate value equal to 0 indicates that no secondary metering is being requested.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ntnQosAccessAsgnSecondaryBurstSize 1.3.6.1.4.1.45.4.7.1.13.6.1.17
The maximum number of bytes in a single transmission burst. This attribute is used for: EBS in RFC 2697 for srTCM PBS in RFC 2698 for trTCM.
Status: current Access: read-create
OBJECT-TYPE    
  BurstSize  

ntnQosAccessAsgnYelActionDrop 1.3.6.1.4.1.45.4.7.1.13.6.1.18
This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The value 'drop(1)', when specified, will cause the packet being evaluated to be dropped. A value of 'pass(2)' indicates that this packet should not be dropped. Applies to yellow actions.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER drop(1), pass(2)  

ntnQosAccessAsgnYelActionRemarkDscp 1.3.6.1.4.1.45.4.7.1.13.6.1.19
This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram that is deemed to be out-of-profile to be updated with the value of this object. A value of -1 indicates that the DSCP field should not be updated. Applies to yellow actions.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..63  

ntnQosAccessAsgnYelActionRemarkCos 1.3.6.1.4.1.45.4.7.1.13.6.1.20
This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deemed to be out-of-profile to be updated based on the value of this object. Specifying a value equal to 'ignore(9)' means that no action will be taken related to this attribute. Applies to yellow actions.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER markAsPriority0(1), markAsPriority1(2), markAsPriority2(3), markAsPriority3(4), markAsPriority4(5), markAsPriority5(6), markAsPriority6(7), markAsPriority7(8), ignore(9)  

ntnQosAccessAsgnYelActionSetPrec 1.3.6.1.4.1.45.4.7.1.13.6.1.21
This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop precedence may be used to determine traffic precedence relative to other traffic being processed by the device and other implementation specific operations at the egress interface. A low value for the drop precedence equates to the traffic receiving a higher priority in terms of processing. In other words, when congestion is encountered, packets with a 'highDropPrec(2)' will be dropped before packets with a 'lowDropPrec(1)'. Applies to yellow actions.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER lowDropPrec(1), highDropPrec(2)  

ntnQosAccessAsgnSetPriority 1.3.6.1.4.1.45.4.7.1.13.6.1.22
Supports filter set prioritization when multiple filters sets may be associated with an entity (e.g., user, interface) but only one can be applied at the given time. The set with a higher priority value will take precedence and supercede the set with a lower priority value. When priority values are equal, no filter set update will occur. Consulted only when an entity/filter set conflict needs resolution.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..255  

ntnQosAccessAsgnMeteringMode 1.3.6.1.4.1.45.4.7.1.13.6.1.23
Identifies the metering mode requested for the identified filter set. A value of 'noMetering(1)' indicates that metering is not requested for the components of the identified filter set. A 'perPolicyUniformRateMetering(2)' value indicates that a unique meter will be associated with each policy that comprises the identified filter set. Uniform rate and burst data will be used for all meters. A 'perPolicyIndividualRateMetering(3)' value indicates that a unique meter will be associated with each policy that comprises the identified filter set. Unique rate and burst data derived from the associated classifier data will be used for each meter. Setting the attribute to 'perClassifierMetering(4)' will initiate metering on a per-classifier basis. Rate and burst data will be derived from the associated classifier data. The presence of this data will determine whether or not a meter is allocated for the classifier.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER noMetering(1), perPolicyUniformRateMetering(2), perPolicyIndividualRateMetering(3), perClassifierMetering(4)  

ntnQosIfAppsTable 1.3.6.1.4.1.45.4.7.1.13.7
Identifies QoS/security application criteria that is to be applied to a specific interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosIfAppsEntry

ntnQosIfAppsEntry 1.3.6.1.4.1.45.4.7.1.13.7.1
A conceptual row in the ntnQosIfAppsTable. Each row identifies an interface value that corresponds to an entry in the ifTable (MIB-II) and application criteria with which the interface is associated.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosIfAppsEntry  

ntnQosIfAppsIfIndex 1.3.6.1.4.1.45.4.7.1.13.7.1.1
The ifIndex value that is associated with this instance of the ntnQosIfAppsEntry. The ifIndex value of this attribute must correspond to the ifTable entry with the same ifIndex value.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntnQosIfAppsAppEnable 1.3.6.1.4.1.45.4.7.1.13.7.1.2
An enumeration of interface applications. Indicates which applications, if any, apply to the associated interface.
Status: current Access: read-create
OBJECT-TYPE    
  BITS other(0), arpSpoofing(1), dhcpSnooping(2), dhcpSpoofing(3), sqlSlam(4), nachia(5), xmas(6), synFinScan(7), ftpPort(8), dnsPort(9), bpduBlocker(10)  

ntnQosIfAppsDefaultGateway 1.3.6.1.4.1.45.4.7.1.13.7.1.3
The IP address of the default gateway to be used when defining the policy criteria used by the ARP Spoofing support.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv4  

ntnQosIfAppsIfType 1.3.6.1.4.1.45.4.7.1.13.7.1.4
A value describing the overall interface type. Used when determining whether the DHCP Blocking support should be applied to the associated interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER access(1), core(2)  

ntnQosIfAppsDHCPServer 1.3.6.1.4.1.45.4.7.1.13.7.1.5
The IP address of the DHCP Server to be used when defining the policy criteria used by the DHCP Spoofing support.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv4  

ntnQosIfAppsStorage 1.3.6.1.4.1.45.4.7.1.13.7.1.6
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosIfAppsStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosIfAppsStatus 1.3.6.1.4.1.45.4.7.1.13.7.1.7
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosUserPolicyNextFree 1.3.6.1.4.1.45.4.7.1.13.8
This object contains an unused value for ntnQosUserPolicyId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosUserPolicyTable 1.3.6.1.4.1.45.4.7.1.13.9
User policy definitions. This class describes the user policy data that exists on the device. User policy data associates a user and role with an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosUserPolicyEntry

ntnQosUserPolicyEntry 1.3.6.1.4.1.45.4.7.1.13.9.1
An instance of this class describes the characteristics of a user policy data set. User policy data set components include a role combination, a user and group name and user session attributes, such as a session identifier and a session initiation timestamp.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosUserPolicyEntry  

ntnQosUserPolicyId 1.3.6.1.4.1.45.4.7.1.13.9.1.1
An index that enumerates the user policy entries. Managers can obtain new values for row creation in this table by reading ntnQosUserPolicyNextFree.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosUserPolicyIfIndex 1.3.6.1.4.1.45.4.7.1.13.9.1.2
The ifIndex value that is associated with this instance of the ntnQosUserPolicyEntry. The ifIndex value of this attribute must correspond to an ifTable entry with the same ifIndex value.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

ntnQosUserPolicyRoleCombination 1.3.6.1.4.1.45.4.7.1.13.9.1.3
The role combination that is associated with the interface with an ifIndex value that is equal to ntnQosUserPolicyIfIndex and the user identified by the ntnQosUserPolicyUserName attribute. A user role combination is used to logically identify a physical interface to which policy rules and actions can be applied. The role combination string must be unique from any other role combinations defined in system.
Status: current Access: read-create
OBJECT-TYPE    
  RoleCombination  

ntnQosUserPolicyUserName 1.3.6.1.4.1.45.4.7.1.13.9.1.4
The user name identifying the user that is currently associated with this user policy (i.e., ifIndex and role combination) information.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..255)  

ntnQosUserPolicyUserGroup 1.3.6.1.4.1.45.4.7.1.13.9.1.5
The user group with which the user, identified by the ntnQosUserPolicyUserName attribute, is associated.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

ntnQosUserPolicySessionId 1.3.6.1.4.1.45.4.7.1.13.9.1.6
The system-assigned session identifier used to track instances of this user policy entry (i.e., the user policy entry for a specific interface and user).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosUserPolicySessionStart 1.3.6.1.4.1.45.4.7.1.13.9.1.7
The system-assigned session start timestamp. The value of this attribute corresponds to the value of the sysUpTime attribute, coverted to seconds, at the instant that this user policy entry is created and/or updated.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosUserPolicySessionGroup 1.3.6.1.4.1.45.4.7.1.13.9.1.8
The system-assigned session group identifier. Multiple user sessions belong to the same group if they share the same role combination and have the same value for this attribute. This session group value is associated with installed policy criteria to unambiguously identify the users and interfaces to which QoS policy is being applied.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntnQosUserPolicyStorage 1.3.6.1.4.1.45.4.7.1.13.9.1.9
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosUserPolicyStatus object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosUserPolicyStatus 1.3.6.1.4.1.45.4.7.1.13.9.1.10
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosUserPolicySrcMacAddr 1.3.6.1.4.1.45.4.7.1.13.9.1.11
The 802 source MAC address associated with the identified user. If specified, this address will automatically be used in associated user policy criteria to uniquely identify user traffic on an interface on which potentially other users' traffic will be present.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnQosUserPolicySrcMacAddrMask 1.3.6.1.4.1.45.4.7.1.13.9.1.12
This object specifies the bits in an 802 source MAC address that should be considered when performing a 802 MAC SA comparison against the address specified in the ntnQosUserPolicySrcMacAddr object. The value of this object represents a mask that is logically and'ed with the 802 MAC SA in received frames to derive the value to be compared against the ntnQosUserPolicySrcMacAddr address. A zero bit in the mask thus means that the corresponding bit in the address always matches. The ntnQosUserPolicySrcMacAddr value must also be masked using this value prior to any comparisons. The length of this object in bytes must equal the length in bytes of the ntnQosUserPolicySrcMacAddr. Note that a mask with no bits set (i.e., all zeroes) effectively wildcards the ntnQosUserPolicySrcMacAddr object.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnQosDsL2AccessElemNextFree 1.3.6.1.4.1.45.4.7.1.13.10
This object contains an unused value for ntnQosDsL2AccessElemId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

ntnQosDsL2AccessElemTable 1.3.6.1.4.1.45.4.7.1.13.11
A table of IP/L2 access elements that a system may use to identify and manipulate IP/L2 traffic.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosDsL2AccessElemEntry

ntnQosDsL2AccessElemEntry 1.3.6.1.4.1.45.4.7.1.13.11.1
An IP/L2 access element entry describes a single filter and one or more actions.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosDsL2AccessElemEntry  

ntnQosDsL2AccessElemId 1.3.6.1.4.1.45.4.7.1.13.11.1.1
An index that enumerates the access element entries. Managers can obtain new values for row creation in this table by reading ntnQosDsL2AccessElemNextFree. Version 1/2 attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosDsL2AccessElemAddrType 1.3.6.1.4.1.45.4.7.1.13.11.1.2
The type of IP address used by this access element entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can only look at packets on the wire. Therefore, this object is limited to IPv4 and IPv6 addresses. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

ntnQosDsL2AccessElemDstIpAddr 1.3.6.1.4.1.45.4.7.1.13.11.1.3
The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnQosDsL2AccessElemDstIpPrefixLength indicates the number of bits that are relevant. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

ntnQosDsL2AccessElemDstIpPrefixLength 1.3.6.1.4.1.45.4.7.1.13.11.1.4
The length of the CIDR Prefix carried in ntnQosDsL2AccessElemDstIpAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength  

ntnQosDsL2AccessElemSrcIpAddr 1.3.6.1.4.1.45.4.7.1.13.11.1.5
The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnQosDsL2AccessElemSrcIpPrefixLength indicates the number of bits that are relevant. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

ntnQosDsL2AccessElemSrcIpPrefixLength 1.3.6.1.4.1.45.4.7.1.13.11.1.6
The length of the CIDR Prefix carried in ntnQosDsL2AccessElemSrcIpAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength  

ntnQosDsL2AccessElemDscp 1.3.6.1.4.1.45.4.7.1.13.11.1.7
The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP values are considered a match. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  DscpOrAny  

ntnQosDsL2AccessElemFlowId 1.3.6.1.4.1.45.4.7.1.13.11.1.8
The flow identifier in an IPv6 header. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  FlowIdOrAny  

ntnQosDsL2AccessElemProtocol 1.3.6.1.4.1.45.4.7.1.13.11.1.9
The IP protocol to match against the IPv4 protocol number or the IPv6 Next-Header number in the packet. A value of 255 means match all. Note the protocol number of 255 is reserved by IANA, and Next-Header number of 0 is used in IPv6. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

ntnQosDsL2AccessElemDstL4PortMin 1.3.6.1.4.1.45.4.7.1.13.11.1.10
The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

ntnQosDsL2AccessElemDstL4PortMax 1.3.6.1.4.1.45.4.7.1.13.11.1.11
The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in ntnQosDsL2AccessElemDstL4PortMin. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

ntnQosDsL2AccessElemSrcL4PortMin 1.3.6.1.4.1.45.4.7.1.13.11.1.12
The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

ntnQosDsL2AccessElemSrcL4PortMax 1.3.6.1.4.1.45.4.7.1.13.11.1.13
The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in ntnQosDsL2AccessElemSrcL4PortMin. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

ntnQosDsL2AccessElemDstMacAddr 1.3.6.1.4.1.45.4.7.1.13.11.1.14
The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical address specified by this object, taking into account address wildcarding as specified by the ntnQosDsL2AccessElemDstMacAddrMask object, are potentially subject to the processing guidelines that are associated with this entry through the related action class. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnQosDsL2AccessElemDstMacAddrMask 1.3.6.1.4.1.45.4.7.1.13.11.1.15
This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against the address specified in the ntnQosDsL2AccessElemDstMacAddr object. The value of this object represents a mask that is logically and'ed with the 802 DA in received frames to derive the value to be compared against the ntnQosDsL2AccessElemDstMacAddr address. A zero bit in the mask thus means that the corresponding bit in the address always matches. The ntnQosDsL2AccessElemDstMacAddr value must also be masked using this value prior to any comparisons. The length of this object in octets must equal the length in octets of the ntnQosDsL2AccessElemDstMacAddr. Note that a mask with no bits set (i.e., all zeroes) effectively wildcards the ntnQosDsL2AccessElemDstMacAddr object. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnQosDsL2AccessElemSrcMacAddr 1.3.6.1.4.1.45.4.7.1.13.11.1.16
The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches the physical address specified by this object, taking into account address wildcarding as specified by the ntnQosDsL2AccessElemSrcMacAddrMask object, are potentially subject to the processing guidelines that are associated with this entry through the related action class. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnQosDsL2AccessElemSrcMacAddrMask 1.3.6.1.4.1.45.4.7.1.13.11.1.17
This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison against the address specified in the ntnQosDsL2AccessElemSrcMacAddr object. The value of this object represents a mask that is logically and'ed with the 802 MAC SA in received frames to derive the value to be compared against the ntnQosDsL2AccessElemSrcMacAddr address. A zero bit in the mask thus means that the corresponding bit in the address always matches. The ntnQosDsL2AccessElemSrcMacAddr value must also be masked using this value prior to any comparisons. The length of this object in octets must equal the length in octets of the ntnQosDsL2AccessElemSrcMacAddr. Note that a mask with no bits set (i.e., all zeroes) effectively wildcards the ntnQosDsL2AccessElemSrcMacAddr object. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ntnQosDsL2AccessElemVlanIdMin 1.3.6.1.4.1.45.4.7.1.13.11.1.18
The minimum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosDsL2AccessElemVlanIdMin value must be less than or equal to the ntnQosDsL2AccessElemVlanIdMax value. Setting the ntnQosDsL2AccessElemVlanIdMin object to 1 and the ntnQosDsL2AccessElemVlanIdMax to 4094 indicates that VLAN data should not be considered during traffic classification. If a frame is double tagged, this value represents the outer VLAN ID (Ovid). Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

ntnQosDsL2AccessElemVlanIdMax 1.3.6.1.4.1.45.4.7.1.13.11.1.19
The maximum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosDsL2AccessElemVlanIdMax value must be greater than or equal to the ntnQosDsL2AccessElemVlanIdMin value. Setting the ntnQosDsL2AccessElemVlanIdMin object to 1 and the ntnQosDsL2AccessElemVlanIdMax to 4094 indicates that VLAN data should not be considered during traffic classification. If a frame is double tagged, this value represents the outer VLAN ID (Ovid). Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

ntnQosDsL2AccessElemVlanTag 1.3.6.1.4.1.45.4.7.1.13.11.1.20
This object indicates the data link layer packet format that frames must have to match this L2 classifier entry. A value of 'untagged(1)' indicates that only frames received untagged will match this classifier component. A value of 'tagged(2)' means that only frames received tagged (both single tagged and double tagged) will be considered a match. A value of 'ignore(3)' means that the presence, or lack thereof, of a VLAN tag in the received packet will not be considered when determining whether a frame matches this classifier entry. A value of 'doubleTagged(4)' means that only frames received with an inner and outer tag (i.e., a double tagged frame) will be considered a match. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER untagged(1), tagged(2), ignore(3), doubleTagged(4)  

ntnQosDsL2AccessElemEtherType 1.3.6.1.4.1.45.4.7.1.13.11.1.21
This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Example settings would include 'IP' (0x0800), 'ARP' (0x0806) and 'IPX' (0x8137). Setting the ntnQosDsL2AccessElemEtherType object to 0xFFFF indicates that EtherType data should not be considered during traffic classification. Note the EtherType value of 0xFFFF is reserved by IANA. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..ffff  

ntnQosDsL2AccessElemUserPriority 1.3.6.1.4.1.45.4.7.1.13.11.1.22
The 802.1p user priority value against which the value contained in the user priority field of a tagged 802.1 frame is compared. A test for equality is performed when determining if a match exists between the data in a data link layer frame and the value of this classifier. Setting the value of this object to 'matchAllPriorities(9)' causes all user priority values to match this attribute. This essentially makes any comparisons with regard to user priority values unnecessary. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER matchPriority0(1), matchPriority1(2), matchPriority2(3), matchPriority3(4), matchPriority4(5), matchPriority5(6), matchPriority6(7), matchPriority7(8), matchAllPriorities(9)  

ntnQosDsL2AccessElemActionDrop 1.3.6.1.4.1.45.4.7.1.13.11.1.23
This action attribute is used to specify whether a packet should dropped or switched (i.e., not dropped). The value 'drop(1)', when specified, will cause the packet being evaluated to be dropped. A value of 'pass(2)' indicates that this packet should not be dropped. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER drop(1), pass(2)  

ntnQosDsL2AccessElemActionRemarkDscp 1.3.6.1.4.1.45.4.7.1.13.11.1.24
This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram to be updated with the value of this object. A value of -1 indicates that the DSCP field should not be updated. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..63  

ntnQosDsL2AccessElemActionRemarkCos 1.3.6.1.4.1.45.4.7.1.13.11.1.25
This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated based on the value of this object. Specifying a value equal to 'ignore(9)' means that no action will be taken related to this attribute. Specifying a value equal to 'deriveFromEgressDscp(10)' means that the value for this attribute will be assigned based on DSCP-to-user priority map information maintained in the system. The DSCP value specified for remarking in the ntnQosDsL2AccessElemActionRemarkDscp attribute will be used to determine the user priority. Specifying a value equal to 'deriveFromIngressTosPrec(11)' means that the value for this attribute will be assigned based on the value of the precedence bits in the IP Type-Of-Service (TOS) field, as defined in RFC 791. The eight precedence values, also referred to as Class Selector (CS) values, have a one-to-one correspondence with the eight 802.1p user priority values. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER markAsPriority0(1), markAsPriority1(2), markAsPriority2(3), markAsPriority3(4), markAsPriority4(5), markAsPriority5(6), markAsPriority6(7), markAsPriority7(8), ignore(9), deriveFromEgressDscp(10), deriveFromIngressTosPrec(11)  

ntnQosDsL2AccessElemActionSetPrec 1.3.6.1.4.1.45.4.7.1.13.11.1.26
This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop precedence may be used to determine traffic precedence relative to other traffic being processed by the device and other implementation specific operations at the egress interface. A low value for the drop precedence equates to the traffic receiving a higher priority in terms of processing. In other words, when congestion is encountered, packets with a 'highDropPrec(2)' will be dropped before packets with a 'lowDropPrec(1)'. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER lowDropPrec(1), highDropPrec(2)  

ntnQosDsL2AccessElemName 1.3.6.1.4.1.45.4.7.1.13.11.1.27
A label used to reference the access element in a textual manner. All related access elements (e.g., those that comprise an access-list) must have the same label. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

ntnQosDsL2AccessElemBlock 1.3.6.1.4.1.45.4.7.1.13.11.1.28
A label used to identify access elements that are members of the same classification block. Access elements are members of the same block if they share the same access element name (ntnQosDsL2AccessElemName attribute) and the same block name. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ntnQosDsL2AccessElemType 1.3.6.1.4.1.45.4.7.1.13.11.1.29
Identifies the DS/L2 access element type. Designates the higher-level application through which this entry was created. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dsL2NsnaClfr(1), dsL2UbpClfr(2), dsL2TrafficProfile(3)  

ntnQosDsL2AccessElemStorage 1.3.6.1.4.1.45.4.7.1.13.11.1.30
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosDsL2AccessElemStatus 1.3.6.1.4.1.45.4.7.1.13.11.1.31
The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntnQosDsL2AccessElemEvalPrec 1.3.6.1.4.1.45.4.7.1.13.11.1.32
An evaluation order attribute used to order elements with the same name and to link elements across DS and L2 Access Element tables. Only used with NSNA applications. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

ntnQosDsL2AccessElemIpFlags 1.3.6.1.4.1.45.4.7.1.13.11.1.33
Represents the flags present in an IPv4 header. If a bit that is associated with a specific IP flag is set in this attribute, IPv4 packets with the specified flag set in the header will match this classifier. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  BITS ipv4MfFlagSet(0), ipv4DfFlagSet(1)  

ntnQosDsL2AccessElemTcpCtrlFlags 1.3.6.1.4.1.45.4.7.1.13.11.1.34
Represents the control flags (code bits) present in an TCP header. If a bit that is associated with a specific TCP control flag is set in this attribute, TCP packets with the specified flag set in the header will match this classifier. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  BITS tcpUrgFlagSet(0), tcpAckFlagSet(1), tcpPshFlagSet(2), tcpRstFlagSet(3), tcpSynFlagSet(4), tcpFinFlagSet(5)  

ntnQosDsL2AccessElemIpv4Options 1.3.6.1.4.1.45.4.7.1.13.11.1.35
This object indicates whether the presence, or lack thereof, of IPv4 options in an IPv4 packet should should be considered when looking for a match for this classifier entry. A value of 'ipv4OptionsPresent(1)' indicates that only IPv4 packets with options will match this classifier element. A value of 'ipv4OptionsNotPresent(2)' means that only IPv4 packets without options will be considered a match. A value of 'ignore(3)' means that the presence, or lack thereof, of IPv4 options in the received packet will not be considered when determining whether a packet matches this classifier entry. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipv4OptionsPresent(1), ipv4OptionsNotPresent(2), ignore(3)  

ntnQosDsL2AccessElemPktType 1.3.6.1.4.1.45.4.7.1.13.11.1.36
This object indicates the data link layer frame format that frames must have to match this L2 classifier entry. A value of 'ethernetII(1)' indicates that only Ethernet II format frames will match this classifier component. A value of 'snap(2)' indicates that only IEEE 802 SNAP format frames will match this classifier component. A value of 'llc(3)' indicates that only IEEE 802 LLC format frames will match this classifier component. A value of 'ignore(4)' means that the frame, format will not be considered when determining whether a frame matches this classifier entry. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ethernetII(1), snap(2), llc(3), ignore(4)  

ntnQosDsL2AccessElemIvidMin 1.3.6.1.4.1.45.4.7.1.13.11.1.37
The minimum value that the Inner VLAN ID (Ivid) in a double tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrIvidMin value must be less than or equal to the ntnL2MultiFieldClfrIvidMax value. Setting the ntnL2MultiFieldClfrIvidMin object to 1 and the ntnL2MultiFieldClfrIvidMax to 4094 indicates that inner VLAN tag data should not be considered during traffic classification. A non-default value for this attribute may only be specified if the ntnL2MultiFieldClfrVlanTag attribute has a value of 'doubleTagged(4)'. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

ntnQosDsL2AccessElemIvidMax 1.3.6.1.4.1.45.4.7.1.13.11.1.38
The maximum value that the Inner VLAN ID (Ivid) in a double tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrIvidMax value must be greater than or equal to the ntnL2MultiFieldClfrIvidMin value. Setting the ntnL2MultiFieldClfrIvidMin object to 1 and the ntnL2MultiFieldClfrIvidMax to 4094 indicates that VLAN data should not be considered during traffic classification. A non-default value for this attribute may only be specified if the ntnL2MultiFieldClfrVlanTag attribute has a value of 'doubleTagged(4)'. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

ntnQosDsL2AccessElemUnknownUcastFrames 1.3.6.1.4.1.45.4.7.1.13.11.1.39
If 'true(1)', frames containing an unknown unicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosDsL2AccessElemUnknownMcastFrames 1.3.6.1.4.1.45.4.7.1.13.11.1.40
If 'true(1)', frames containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosDsL2AccessElemKnownUcastFrames 1.3.6.1.4.1.45.4.7.1.13.11.1.41
If 'true(1)', frames containing a known unicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosDsL2AccessElemKnownMcastFrames 1.3.6.1.4.1.45.4.7.1.13.11.1.42
If 'true(1)', frames containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosDsL2AccessElemBcastFrames 1.3.6.1.4.1.45.4.7.1.13.11.1.43
If 'true(1)', frames containing a broadcast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosDsL2AccessElemUnknownIpMcast 1.3.6.1.4.1.45.4.7.1.13.11.1.44
If 'true(1)', IP packets containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosDsL2AccessElemKnownIpMcast 1.3.6.1.4.1.45.4.7.1.13.11.1.45
If 'true(1)', IP packets containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosDsL2AccessElemNonIpPkt 1.3.6.1.4.1.45.4.7.1.13.11.1.46
If 'true(1)', non IP packets will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this packet type. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosDsL2AccessElemVersion 1.3.6.1.4.1.45.4.7.1.13.11.1.47
Version indicator for ntnQosDsL2AccessElemTable.
Status: current Access: read-create
OBJECT-TYPE    
  VersionIndicator  

ntnQosDsL2AccessElemUnknownNonIpMcast 1.3.6.1.4.1.45.4.7.1.13.11.1.48
If 'true(1)', non-IP packets containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosDsL2AccessElemKnownNonIpMcast 1.3.6.1.4.1.45.4.7.1.13.11.1.49
If 'true(1)', non-IP packets containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosDsL2AccessElemMasterBlockMember 1.3.6.1.4.1.45.4.7.1.13.11.1.50
If 'true(1)', attribute values in this DsL2Access element will take precedence over values in other entries when multiple elements are members of the same block and a single value must be chosen to represent all of the block members. For example, a metered policy with a block of filters requires a single in-profile-action be specified. This attribute is used to identify the master block member from the block member list from which the in-profile-action will be derived. A value of 'false(2)' indicates that, if this element is the member of a block, attribute values in this element will not explicitly take precedence over values in other block member elements. Multiple block members may have the value of this attribute set to 'true(1)'. If multiple block member masters are defined or if all block members have the value of this attribute set to 'false(2)', value precedence is determined using element evaluation precedence (i.e., the block member with the lowest evaluation precedence acts as the master when necessary). Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

ntnQosDsL2AccessElemMeterType 1.3.6.1.4.1.45.4.7.1.13.11.1.51
The metering algorithm associated with the rate and burst parameters. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER simpleTokenBucket(1), srTCMBlind(2), srTCMAware(3), trTCMBlind(4), trTCMAware(5)  

ntnQosDsL2AccessElemRate 1.3.6.1.4.1.45.4.7.1.13.11.1.52
The token-bucket rate, in kilobits per second (kbps). This attribute is used for: CIR for Simple Token Bucket CIR in RFC 2697 for srTCM CIR in RFC 2698 for trTCM CTR in RFC 2859 for TSWTCM AverageRate in RFC 3290. A rate value equal to 0 indicates that no metering is being requested. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ntnQosDsL2AccessElemBurstSize 1.3.6.1.4.1.45.4.7.1.13.11.1.53
The maximum number of bytes in a single transmission burst. This attribute is used for: Token bucket size for Simple Token Bucket CBS in RFC 2697 for srTCM CBS in RFC 2698 for trTCM Burst Size in RFC 3290. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  BurstSize  

ntnQosDsL2AccessElemOutActionDrop 1.3.6.1.4.1.45.4.7.1.13.11.1.54
This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The value 'drop(1)', when specified, will cause the packet being evaluated to be dropped. A value of 'pass(2)' indicates that this packet should not be dropped. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER drop(1), pass(2)  

ntnQosDsL2AccessElemOutActionRemarkDscp 1.3.6.1.4.1.45.4.7.1.13.11.1.55
This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram that is deemed to be out-of-profile to be updated with the value of this object. A value of -1 indicates that the DSCP field should not be updated. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..63  

ntnQosDsL2AccessElemOutActionRemarkCos 1.3.6.1.4.1.45.4.7.1.13.11.1.56
This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deemed to be out-of-profile to be updated based on the value of this object. Specifying a value equal to 'ignore(9)' means that no action will be taken related to this attribute. Specifying a value equal to 'deriveFromEgressDscp(10)' means that the value for this attribute will be assigned based on DSCP-to-user priority map information maintained in the system. The DSCP value specified for remarking in the ntnQosDsL2AccessElemOutActionRemarkDscp attribute will be used to determine the user priority. Specifying a value equal to 'deriveFromIngressTosPrec(11)' means that the value for this attribute will be assigned based on the value of the precedence bits in the IP Type-Of-Service (TOS) field, as defined in RFC 791. The eight precedence values, also referred to as Class Selector (CS) values, have a one-to-one correspondence with the eight 802.1p user priority values. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER markAsPriority0(1), markAsPriority1(2), markAsPriority2(3), markAsPriority3(4), markAsPriority4(5), markAsPriority5(6), markAsPriority6(7), markAsPriority7(8), ignore(9), deriveFromEgressDscp(10), deriveFromIngressTosPrec(11)  

ntnQosDsL2AccessElemOutActionSetPrec 1.3.6.1.4.1.45.4.7.1.13.11.1.57
This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop precedence may be used to determine traffic precedence relative to other traffic being processed by the device and other implementation specific operations at the egress interface. A low value for the drop precedence equates to the traffic receiving a higher priority in terms of processing. In other words, when congestion is encountered, packets with a 'highDropPrec(2)' will be dropped before packets with a 'lowDropPrec(1)'. Version 1/2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER lowDropPrec(1), highDropPrec(2)  

ntnQosDsL2AccessElemSecondaryRate 1.3.6.1.4.1.45.4.7.1.13.11.1.58
The token-bucket rate, in kilobits per second (kbps). This attribute is used for: PIR in RFC 2698 for trTCM A rate value equal to 0 indicates that no secondary metering is being requested. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ntnQosDsL2AccessElemSecondaryBurstSize 1.3.6.1.4.1.45.4.7.1.13.11.1.59
The maximum number of bytes in a single transmission burst. This attribute is used for: EBS in RFC 2697 for srTCM PBS in RFC 2698 for trTCM. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  BurstSize  

ntnQosDsL2AccessElemYelActionDrop 1.3.6.1.4.1.45.4.7.1.13.11.1.60
This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The value 'drop(1)', when specified, will cause the packet being evaluated to be dropped. A value of 'pass(2)' indicates that this packet should not be dropped. Applies to yellow actions. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER drop(1), pass(2)  

ntnQosDsL2AccessElemYelActionRemarkDscp 1.3.6.1.4.1.45.4.7.1.13.11.1.61
This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram that is deemed to be out-of-profile to be updated with the value of this object. A value of -1 indicates that the DSCP field should not be updated. Applies to yellow actions. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..63  

ntnQosDsL2AccessElemYelActionRemarkCos 1.3.6.1.4.1.45.4.7.1.13.11.1.62
This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deemed to be out-of-profile to be updated based on the value of this object. Specifying a value equal to 'ignore(9)' means that no action will be taken related to this attribute. Specifying a value equal to 'deriveFromEgressDscp(10)' means that the value for this attribute will be assigned based on DSCP-to-user priority map information maintained in the system. The DSCP value specified for remarking in the ntnQosDsL2AccessElemYelActionRemarkDscp attribute will be used to determine the user priority. Specifying a value equal to 'deriveFromIngressTosPrec(11)' means that the value for this attribute will be assigned based on the value of the precedence bits in the IP Type-Of-Service (TOS) field, as defined in RFC 791. The eight precedence values, also referred to as Class Selector (CS) values, have a one-to-one correspondence with the eight 802.1p user priority values. Applies to yellow actions. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER markAsPriority0(1), markAsPriority1(2), markAsPriority2(3), markAsPriority3(4), markAsPriority4(5), markAsPriority5(6), markAsPriority6(7), markAsPriority7(8), ignore(9), deriveFromEgressDscp(10), deriveFromIngressTosPrec(11)  

ntnQosDsL2AccessElemYelActionSetPrec 1.3.6.1.4.1.45.4.7.1.13.11.1.63
This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop precedence may be used to determine traffic precedence relative to other traffic being processed by the device and other implementation specific operations at the egress interface. A low value for the drop precedence equates to the traffic receiving a higher priority in terms of processing. In other words, when congestion is encountered, packets with a 'highDropPrec(2)' will be dropped before packets with a 'lowDropPrec(1)'. Applies to yellow actions. Version 2 attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER lowDropPrec(1), highDropPrec(2)  

ntnQosFilterSetStatsTable 1.3.6.1.4.1.45.4.7.1.13.12
This table contains counters for all the traffic passing through a processing element at the filter set/classifier level.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosFilterSetStatsEntry

ntnQosFilterSetStatsEntry 1.3.6.1.4.1.45.4.7.1.13.12.1
An entry in the filter set statistics table describes a single set of traffic counters for a specific filter set/precedence/evaluation order combination.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosFilterSetStatsEntry  

ntnQosFilterSetStatsAccessAsgnId 1.3.6.1.4.1.45.4.7.1.13.12.1.1
An index component that identifies the Access Assignment element associated with this Filter Set Statistics entry. This attribute has the same value as the ntnQosAccessAsgnId attribute with which it is associated.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosFilterSetStatsPrecedence 1.3.6.1.4.1.45.4.7.1.13.12.1.2
An index component that identifies the precedence level associated with the filter set element for which statistics data is being returned.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosFilterSetStatsEvalOrder 1.3.6.1.4.1.45.4.7.1.13.12.1.3
An index component that identifies the evaluation order associated with the filter set element for which statistics data is being returned.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

ntnQosFilterSetStatsInProfileOctets 1.3.6.1.4.1.45.4.7.1.13.12.1.4
The number of octets considered to be in-profile that have been processed by the associated data path classifier.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ntnQosFilterSetStatsInProfilePkts 1.3.6.1.4.1.45.4.7.1.13.12.1.5
The number of packets considered to be in-profile that have been processed by the associated data path classifier.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ntnQosFilterSetStatsOutOfProfileOctets 1.3.6.1.4.1.45.4.7.1.13.12.1.6
The number of octets considered to be out-of-profile that have been processed by the associated data path classifier.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ntnQosFilterSetStatsOutOfProfilePkts 1.3.6.1.4.1.45.4.7.1.13.12.1.7
The number of packets considered to be out-of-profile that have been processed by the associated data path classifier.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ntnQosFilterSetStatsAccessElemId 1.3.6.1.4.1.45.4.7.1.13.12.1.8
Identifies the individual Access Element that is a component of the referenced filter set and to which the statistics data associated with this filter set/precedence/eval-order tuple applies.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

ntnQosFilterSetStatsStorage 1.3.6.1.4.1.45.4.7.1.13.12.1.9
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ntnQosFilterSetStatsStatus 1.3.6.1.4.1.45.4.7.1.13.12.1.10
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

avFcoeRedirNextFree 1.3.6.1.4.1.45.4.7.1.13.13
This object contains an unused value for avFcoeRedirId, or a zero to indicate that none exist.
Status: current Access: read-only
OBJECT-TYPE    
  IndexIntegerNextFree  

avFcoeRedirTable 1.3.6.1.4.1.45.4.7.1.13.14
A table of FCoE streams that are being redirected through an external FCoE Network Controller (FNC).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvFcoeRedirEntry

avFcoeRedirEntry 1.3.6.1.4.1.45.4.7.1.13.14.1
An FCoE redirection entry contains the data necessary to redirect a specific FCoE stream through an external network controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  AvFcoeRedirEntry  

avFcoeRedirId 1.3.6.1.4.1.45.4.7.1.13.14.1.1
An index that enumerates the FCoE redirect entries. Managers can obtain new values for row creation in this table by reading avFcoeRedirNextFree.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

avFcoeRedirDstId 1.3.6.1.4.1.45.4.7.1.13.14.1.2
This object specifies the Fibre Channel (FC) destination ID (D_ID) that should be used when performing stream identification.
Status: current Access: read-create
OBJECT-TYPE    
  FcId  

avFcoeRedirIngressInterfaceList 1.3.6.1.4.1.45.4.7.1.13.14.1.3
This object identifies ingress interfaces, using an interface's ifIndex representation, to which the filter and action criteria specified in this entry should be applied.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceList  

avFcoeRedirVlanIdMin 1.3.6.1.4.1.45.4.7.1.13.14.1.4
The minimum value that the VLAN ID (VID) in a tagged packet must have in order to match this entry. The avFcoeRedirVlanIdMin value must be less than or equal to the avFcoeRedirVlanIdMax value. Setting the avFcoeRedirVlanIdMin object to 1 and the avFcoeRedirVlanIdMax to 4094 indicates that VLAN data should not be considered during traffic identification.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

avFcoeRedirVlanIdMax 1.3.6.1.4.1.45.4.7.1.13.14.1.5
The maximum value that the VLAN ID (VID) in a tagged packet must have in order to match this entry. The avFcoeRedirVlanIdMax value must be greater than or equal to the avFcoeRedirVlanIdMin value. Setting the avFcoeRedirVlanIdMin object to 1 and the avFcoeRedirVlanIdMax to 4094 indicates that VLAN data should not be considered during traffic identification.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

avFcoeRedirUserPriority 1.3.6.1.4.1.45.4.7.1.13.14.1.6
The 802.1p user priority value against which the value contained in the user priority field of a tagged 802.1 frame is compared. A test for equality is performed when determining if a match exists between the data in a data link layer frame and the value of this entry. A value of 'matchAllPriorities(9)' causes all user priority values to match this attribute. This essentially makes any comparisons with regard to user priority values unnecessary.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER matchPriority0(1), matchPriority1(2), matchPriority2(3), matchPriority3(4), matchPriority4(5), matchPriority5(6), matchPriority6(7), matchPriority7(8), matchAllPriorities(9)  

avFcoeRedirEtherType 1.3.6.1.4.1.45.4.7.1.13.14.1.7
This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Example settings would include 'IP' (0x0800), 'FCoE' (0x8906) and 'FIP' (0x8914). Setting the avFcoeRedirEtherType object to 0xFFFF indicates that EtherType data should not be considered during traffic classification. Note the EtherType value of 0xFFFF is reserved by IANA.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..ffff  

avFcoeRedirSrcId 1.3.6.1.4.1.45.4.7.1.13.14.1.8
This object specifies the Fibre Channel (FC) source ID (D_ID) that should be used when performing stream identification. Setting this attribute to it's default value indicates that S_ID data should not be used for traffic identification.
Status: current Access: read-create
OBJECT-TYPE    
  FcId  

avFcoeRedirActionUpdateDstMac 1.3.6.1.4.1.45.4.7.1.13.14.1.9
The 802 MAC address that will be used to update the destination MAC address in frames that are identified based on filter data specified in this entry.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

avFcoeRedirActionUpdateSrcMac 1.3.6.1.4.1.45.4.7.1.13.14.1.10
The 802 MAC address that will be used to update the source MAC address in frames that are identified based on filter data specified in this entry.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

avFcoeRedirActionEgressInterface 1.3.6.1.4.1.45.4.7.1.13.14.1.11
The interface through which frames identified based on filter data specified in this entry will egress the device. An egress interface or an egress trunk must be specified. A value of 0 indicates that an egress interface has not been specified.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

avFcoeRedirName 1.3.6.1.4.1.45.4.7.1.13.14.1.12
A label used to reference the FCoE redirect entry in a textual manner.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

avFcoeRedirStorage 1.3.6.1.4.1.45.4.7.1.13.14.1.13
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if the associated status object is equal to 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

avFcoeRedirStatus 1.3.6.1.4.1.45.4.7.1.13.14.1.14
The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

avFcoeRedirProcessedFrames 1.3.6.1.4.1.45.4.7.1.13.14.1.15
Counts the frames that have matched the criteria specified in this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

avFcoeRedirActionEgressTrunkId 1.3.6.1.4.1.45.4.7.1.13.14.1.16
The trunk through which frames identified based on filter data specified in this entry will egress the device. An egress interface or an egress trunk must be specified. A value of 0 indicates that an egress trunk has not been specified.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..512  

ntnQosDEITable 1.3.6.1.4.1.45.4.7.1.14
Table to configure DEI support. DEI provides the user the option to set the packet color based on the CFI (used as DEI) bit in the packet 802.1Q tag. Also the user has the option to mark the packet color into the CFI bit in the 802.1Q tag.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosDEIEntry

ntnQosDEIEntry 1.3.6.1.4.1.45.4.7.1.14.1
An instance of the ntnQoSDEI class that identifies an interface options for DEI.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtnQosDEIEntry  

ntnQosDEIInterfaceId 1.3.6.1.4.1.45.4.7.1.14.1.1
An index that identifies the interface index associated with this table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntnQosDEIIngressColorFromDEI 1.3.6.1.4.1.45.4.7.1.14.1.2
This option allows the user to enable ingress coloring if the packets based on DEI in the 802.1Q packet tag.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntnQosDEIEgressMarkDEI 1.3.6.1.4.1.45.4.7.1.14.1.3
This option allows the user to mark at egress the DEI bit in the 802.1Q tag if the packet is colored.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntnQosConfigResetToDefaults 1.3.6.1.4.1.45.4.7.1.11.3
All installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this object to 'true(1)'. The value 'false(2)' will always be returned when querying this object.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntnQosConfigTrackStatistics 1.3.6.1.4.1.45.4.7.1.11.4
The value of this attribute determines if statistics tracking is enabled for system-level policies. System-level policies are created to enforce the default QoS processing rules associated with 'trusted' and 'untrusted' interface classes. This attribute is consulted during system policy creation. Setting this object to 'disabled(1)' causes statistics tracking to be disabled for the system-level policy being created. No statistics counter resources will be consumed. Setting this attribute to 'individual(2)' causes individual counters to be allocated for each classifier that comprises the system-level policy. A value of 'aggregate(3)' causes a single statistics counter to be allocated to track data associated with all of the classifiers that comprise the system policy. The value of this attribute is consulted when a policy is created or reinstalled. This allows the filter statistics tracking to be enabled only when deemed necessary.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), individual(2), aggregate(3)  

ntnQosConfigNVCommitDelay 1.3.6.1.4.1.45.4.7.1.11.5
Specifies the maximum amount of time, in seconds, before non-volatile QoS configuration data will be written to non-volatile storage. Delaying NV access can be used to minimize file I/O aiding agent efficiency if a large amount of QoS data is being configured.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

ntnQosConfigDefaultQueueCfg 1.3.6.1.4.1.45.4.7.1.11.6
The value of this attribute determines the queue set that is associated with all egress interfaces by default. A queue set is characterized by the number of queues in the set, how the queues are serviced, the queue weights and the buffer resources that are associated with the inidividual queues. All queue sets are defined in the ntnQosIfQueueTable. The value of this attribute is consulted when the system is initialized. Changing the value of this attribute will therefore not take effect until after the system is restarted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER queueSetOne(1), queueSetTwo(2), queueSetThree(3), queueSetFour(4), queueSetFive(5), queueSetSix(6), queueSetSeven(7), queueSetEight(8)  

ntnQosConfigDefaultBufferingCaps 1.3.6.1.4.1.45.4.7.1.11.7
The value of this attribute determines the method through which buffering resources are allocated to ports sharing a pool of buffers. The buffering resources associated with a series of ports are finite. This buffer pool may be statistically allocated to the individual ports sharing the pool or they may be allocated such that the traffic pattern dictates which ports temporarily consume the majority of the buffers. The value of this attribute determines the level of buffer sharing or over-allocation that can take place among ports sharing a buffer pool. Higher levels of over-allocation increase the likelyhood (under heavy load) of a relatively few number of ports consuming all the buffers in a pool, causing packets to be dropped on other ports due to buffer starvation. A value of 'minimumOverAllocation(1)' indicates that only a small amount of resource sharing is allowed. Greater resource sharing is allowed if the value of this attribute is 'mediumOverAllocation(2)' and the chance of over-allocation occurring is maximized by the specifying that 'maximumOverAllocation(3)' is desired. In lossless mode, the buffer allocation and thresholds are such that pause frames are generated to the endstations prior to frames being discarded due to lack of available buffers, allowing the end stattions to back off. This mode allows for lossless behavior at the expense of throughput. Lossless PFC mode operates in a similar fashion to lossless but provides the service on a per-priority (802.1p) basis. 'spb-scaled(6)' is a mode similar to 'mediumOverAllocation(2)', but optimized for scaled SPB setups. The value of this attribute is consulted when the system is initialized. Changing the value of this attribute will therefore not take effect until after the system is restarted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER minimumOverAllocation(1), mediumOverAllocation(2), maximumOverAllocation(3), lossless(4), losslessPfc(5), spb-scaled(6)  

ntnQosConfigUBPSupportLevel 1.3.6.1.4.1.45.4.7.1.11.8
Determines whether QoS Agent User Based Policy (UBP) support is enabled and, if so, what level of support is enabled. Setting the value of this attribute to 'ubpSupportDisabled(1)' will cause user information forwarded by other applications (e.g., EAP) to be ignored by the QoS Agent. A value of 'ubpSupportHighSecurityLocalData(2)' or 'ubpSupportLowSecurityLocalData(3)' will cause the internal QoS Agent database to be searched for user-specific classification data when user information is forwarded by other applications. When a high level of security is requested, user- specific classification data that is found must be successfully installed before a user is given access to the switch. A low level of security means that a user will be given access to the switch even if the resources to install user- specific classification data are not currently available. Lastly, a value of 'ubpSupportEPMData(4)' will cause notifications to be generated for Enterprise Policy Manager (EPM) consumption based on user information forwarded by other applications. Notifications will be generated for events of interest to EPM, such as user addition/deletion that is associated with User Based Policy (UBP) support. Notifications will not be generated otherwise. Note that the information that is necessary to construct and transmit a notification must also be configured for this value to be useful. Changing the value of this attribute will cause UBP data currently in-use to be lost.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ubpSupportDisabled(1), ubpSupportHighSecurityLocalData(2), ubpSupportLowSecurityLocalData(3), ubpSupportEPMData(4)  

ntnQosConfigRoleAssocCompatLevel 1.3.6.1.4.1.45.4.7.1.11.9
Determines whether interface role associations are subject to loose or strict capabilities verification. Setting the value of this attribute to 'roleAssocCompatLoose(1)' means that interfaces with different capabilities may be associated with the same role. In this case, configuration issues may arise due to these differences. Setting the value to 'roleAssocCompatStrict(2)' means that only interfaces with compatible capabilities may be associated with the same role. This mode can be used to avoid configuration issues resulting from the interfaces assigned to a role not having the same underlying capabilities.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER roleAssocCompatLoose(1), roleAssocCompatStrict(2)  

ntnQosConfigDappEnable 1.3.6.1.4.1.45.4.7.1.11.10
Dictates whether the DoS Attack Prevention Package (DAPP) is enabled on all applicable ports and, when enabled, if resources will be allocated to track and report on DoS attack detection. If the attribute value is 'disable(1)', DAPP support will be disabled. A value of 'enableWithoutStatusTracking(2)' will cause the DAPP support to be enabled on all ports that are DAPP-capable. No resources will be allocated to track the DoS attack detection status. No log messages and no SNMP Traps will be generated based on the DAPP support. A value of 'enableWithStatusTracking(3)' will cause resources to be verified and consumed prior to enabling DoS attack detection support on DAPP-capable ports. Support will not be enabled if adequate resources are not available. Assuming that resources are available, log messages and SNMP Traps will be generated on a per-unit basis when a DoS attack is identified by the detection logic.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enableWithoutStatusTracking(2), enableWithStatusTracking(3)  

ntnQosConfigDappMinTcpHdrSize 1.3.6.1.4.1.45.4.7.1.11.11
DAPP minimum TCP header length allowed. Used when performing TCP fragment validation. IPv4 TCP first fragment packets will be dropped if the TCP header (IP payload) is less than this value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

ntnQosConfigDappIpv4IcmpMaxLength 1.3.6.1.4.1.45.4.7.1.11.12
DAPP maximum IPv4 ICMP length. Used when performing ICMP validation. IPv4 ICMP packets will be dropped if the length (IP payload) exceeds this value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1023  

ntnQosConfigDappIpv6IcmpMaxLength 1.3.6.1.4.1.45.4.7.1.11.13
DAPP maximum IPv6 ICMP length. Used when performing ICMP validation. IPv6 ICMP packets will be dropped if the length exceeds this value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..16383  

ntnQosConfigNtApplicationMode 1.3.6.1.4.1.45.4.7.1.11.14
Controls NT Application Mode processing. When enabled, identified NT application traffic will be given preferential treatment over non-NT application traffic. 'Mixed' mode processing will remove any special traffic markings at egress. 'Pure' mode processing will leave any special traffic markings intact at egress. Mode changes (updates to the value of this attribute) will take effect immediately.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enablePureMode(2), enableMixedMode(3)  

ntnQosConfigQosOperMode 1.3.6.1.4.1.45.4.7.1.11.15
Controls overall QoS processing for the system. When enabled, all QoS functionality can be exercised by the user. When disabled, installed QoS components are temporarily removed (until the operational mode is re-enabled) and new requested QoS operations will be rejected. The QoS operational mode can not be disabled if QoS components are currently being used by non-QoS applications. If disabled, requests related to QoS components by non-QoS applications will be rejected. Note that re-enabling the QoS operational mode may result in errors if changes have been made affecting available resources while QoS was temporarily disabled. Mode changes (updates to the value of this attribute) will take effect immediately.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ntnQosConfigTrustedProcessingMode 1.3.6.1.4.1.45.4.7.1.11.16
Controls filter usage related to Trusted interface class processing on platforms using filters to support treating traffic as trusted. A mode of 'partialDscpMapping(1)' causes filters to be installed that only support mapping of industry standard DSCP values. This is the default setting. A mode of 'fullDscpMapping(2)' causes filters to be installed mapping all possible DSCP values in support of Trusted interface class processing. A reset may be required for updates of this object to take effect.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER partialDscpMapping(1), fullDscpMapping(2)  

ntnQosConfigResetToPartialDefaults 1.3.6.1.4.1.45.4.7.1.11.17
Most installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this object to 'true(1)'. QoS data that requires a system reset to take effect (e.g., ntnQosConfigDefaultQueueCfg) is not reset to a default value using this object. The value 'false(2)' will always be returned when querying this object.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntnQosConfigClearStats 1.3.6.1.4.1.45.4.7.1.11.18
All counters that are associated with QoS policies are reset to zero by setting the value of this object to 'true(1)'. The value 'false(2)' will always be returned when querying this object.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntnQosConfigFcoeRedirOperMode 1.3.6.1.4.1.45.4.7.1.11.19
Controls the FCoE redirection service for the system. Enabling the service will initiate validation and possible reservation of the resources that are required for service activation. If resources are not available, the enable request will be rejected. Note that re-enabling the FCoE redirection service may result in errors if changes have been made affecting available resources while FCoE redirection was temporarily disabled. Mode changes (updates to the value of this attribute) will take effect immediately.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ntnQosConfigFcoeControllerMacAddr 1.3.6.1.4.1.45.4.7.1.11.20
The 802 MAC address of the FCoE Network Controller (FNC) that is used in conjunction with the FCoE redirection service. Must be defined prior to enabling the FCoE redirection service. Changes made while the FCoE service is enabled will go into effect the next time the service is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

ntnQosConfigFcoeRedirAvail 1.3.6.1.4.1.45.4.7.1.11.21
Controls access to the FCoE Redirect functionality. A value of 'accessible(1)' indicates that the FCoE support can be accessed by an external FCoE Network Controller (FNC). A value of 'notAccessible(2)' indicates that FCoE Redirect functionality can not be accessed by an FNC using SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER accessible(1), notAccessible(2)  

ntnQosConfigFcoeControllerIfIndex 1.3.6.1.4.1.45.4.7.1.11.22
The interface index of the FCoE Network Controller (FNC) that is used in conjunction with the FCoE redirection service. Must be defined prior to enabling the FCoE redirection service. Changes made while the FCoE service is enabled will go into effect the next time the service is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndexOrZero  

ntnQosConfigFcoeControllerVlan 1.3.6.1.4.1.45.4.7.1.11.23
The VLAN associated with the FCoE Network Controller (FNC) that is used in conjunction with the FCoE redirection service. Must be defined prior to enabling the FCoE redirection service. Changes made while the FCoE service is enabled will go into effect the next time the service is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

ntnQosQuickPolicy 1.3.6.1.4.1.45.4.7.1.15
OBJECT IDENTIFIER    

ntnQosQuickPolicyControl 1.3.6.1.4.1.45.4.7.1.15.1
This object is used to create and delete quick policies. Setting the value to create(2) will create a quick policy based on the current values of the other object in the ntnQosQuickPolicy group. Setting the value to delete(3) will delete the quick policy identified by the current value of ntnQosQuickPolicyId. On retrieval, the value is always none(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), create(2), delete(3)  

ntnQosQuickPolicyPortList 1.3.6.1.4.1.45.4.7.1.15.2
This object indicates the list of ports to which the quick policy will be applied.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

ntnQosQuickPolicyAction 1.3.6.1.4.1.45.4.7.1.15.3
This object indicates the main action of the quick-policy.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forward(1), pbits(2), rate(3), trtcm(4)  

ntnQosQuickPolicyId 1.3.6.1.4.1.45.4.7.1.15.4
This object indicates the ID of a policy to be deleted.
Status: current Access: read-write
OBJECT-TYPE    
  IndexInteger  

ntnQosQuickPolicyPbitsValue 1.3.6.1.4.1.45.4.7.1.15.5
The pbits value for creating a quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

ntnQosQuickPolicyRate 1.3.6.1.4.1.45.4.7.1.15.6
The rate value of the simple meter associated with a quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 64..32000000  

ntnQosQuickPolicyTrTCMType 1.3.6.1.4.1.45.4.7.1.15.7
The type of a trtc quick policy. This object is ignored if the value of ntnQosQuickPolicyAction is not trtcm(4).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER blind(1), aware(2)  

ntnQosQuickPolicyCIRRate 1.3.6.1.4.1.45.4.7.1.15.8
The CIR rate for creating a trtcm quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 64..32000000  

ntnQosQuickPolicyPIRRate 1.3.6.1.4.1.45.4.7.1.15.9
The PIR rate for creating a trtcm quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 64..32000000  

ntnQosQuickPolicyTrackQiQType 1.3.6.1.4.1.45.4.7.1.15.10
The QinQ type for a quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER qinq1(1), qinq2(2), ignore(3)  

ntnQosQuickPolicyDscp 1.3.6.1.4.1.45.4.7.1.15.11
The DSCP codepoint for a quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  Dscp  

ntnQosQuickPolicyPriority 1.3.6.1.4.1.45.4.7.1.15.12
The priority value for a quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

ntnQosQuickPolicyVid 1.3.6.1.4.1.45.4.7.1.15.13
The VLAN ID for a quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  VlanId  

ntnQosQuickPolicyTPID 1.3.6.1.4.1.45.4.7.1.15.14
The TPID value for a quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1536..65534  

ntnQosQuickPolicyIVid 1.3.6.1.4.1.45.4.7.1.15.15
The IVID value or a quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  VlanId  

ntnQosQuickPolicyITPID 1.3.6.1.4.1.45.4.7.1.15.16
The ITPID value for a quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1536..65534  

ntnQosQuickPolicyIPriority 1.3.6.1.4.1.45.4.7.1.15.17
The I-priority value for a quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

ntnQosQuickPolicyPrecedence 1.3.6.1.4.1.45.4.7.1.15.18
The precedence value for a quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..15  

ntnQosQuickPolicyTrackStatistics 1.3.6.1.4.1.45.4.7.1.15.19
Indicates whether statistics should be tracked for this quick policy.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntnQosFilterLimiting 1.3.6.1.4.1.45.4.7.1.16
OBJECT IDENTIFIER    

ntnQosFilterLimitingAdminEnabled 1.3.6.1.4.1.45.4.7.1.16.1
This object indicates whether QoS filter limiting is administratively enabled. Note that changes to this object are not applied to the operational state until the system is rebooted, so this value may differ from that of ntnQosFilterLimitingOperEnabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntnQosFilterLimitingOperEnabled 1.3.6.1.4.1.45.4.7.1.16.2
This object indicates whether QoS filter limiting is currently enabled. Note that this object will only change values (in response to changes to the value of ntnQosFilterLimitingOperEnabled) when the system is rebooted.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

ntnQosPolicyEvolLocalUbpSessionFailure 1.3.6.1.4.1.45.4.7.3.1
Signifies that filter data associated with a user could not be installed in the context of local UBP support. The current UBP support level determines whether a User Policy element was created or not in this resource-exhaustion scenario.
Status: current Access: read-only
NOTIFICATION-TYPE    

ntnQosPolicyEvolDosAttackDetected 1.3.6.1.4.1.45.4.7.3.2
Indicates that the DAPP support has detected an attack on the device generating this trap. A notification is generated once for each unit that contains ports on which an attack has been detected. In addition to the required slot and port data, additional ports on the unit that has experienced a DAPP-detected DoS attack may also be included in the trap.
Status: current Access: read-only
NOTIFICATION-TYPE    

avFcoeRedirEgressIssueDetected 1.3.6.1.4.1.45.4.7.3.3
Indicates that an event that impacts egress data that is associated with one or more FCoE Redirect entries has been detected.
Status: current Access: read-only
NOTIFICATION-TYPE    

ntnQosPolicyEvolPibCompliances 1.3.6.1.4.1.45.4.7.2.1
OBJECT IDENTIFIER    

ntnQosPolicyEvolPibGroups 1.3.6.1.4.1.45.4.7.2.2
OBJECT IDENTIFIER    

ntnQosPolicyEvolPibCompliance 1.3.6.1.4.1.45.4.7.2.1.2
Describes the requirements for conformance to the Nortel Networks QoS Policy Evolution PIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

ntnQosInterfaceTypeGroup 1.3.6.1.4.1.45.4.7.2.2.1
Objects from the ntnQosInterfaceTypeExtTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosQsetPriAssignmentGroup 1.3.6.1.4.1.45.4.7.2.2.2
Objects from the ntnQosQsetPriAssignmentTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosQsetDscpAssignmentGroup 1.3.6.1.4.1.45.4.7.2.2.3
Objects from the ntnQosQsetDscpAssignmentTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosShapingParamsGroup 1.3.6.1.4.1.45.4.7.2.2.4
Objects from the ntnQosShapingParamsTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnDsMultiFieldClfrGroup 1.3.6.1.4.1.45.4.7.2.2.5
Objects supporting and from the ntnDsMultiFieldClfrTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnL2MultiFieldClfrGroup 1.3.6.1.4.1.45.4.7.2.2.6
Objects supporting and from the ntnL2MultiFieldClfrTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnSystemClfrGroup 1.3.6.1.4.1.45.4.7.2.2.7
Objects supporting and from the ntnSystemClfrTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnClfrComponentGroup 1.3.6.1.4.1.45.4.7.2.2.8
Objects supporting and from the ntnClfrComponentTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnClfrBlockGroup 1.3.6.1.4.1.45.4.7.2.2.9
Objects supporting and from the ntnClfrBlockTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosMeterGroup 1.3.6.1.4.1.45.4.7.2.2.10
Objects supporting and from the ntnQosMeterTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosTBParamGroup 1.3.6.1.4.1.45.4.7.2.2.11
Objects supporting and from the ntnQosTBParamTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosBaseActionGroup 1.3.6.1.4.1.45.4.7.2.2.12
Objects supporting and from the ntnQosBaseActionTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosIfcActionGroup 1.3.6.1.4.1.45.4.7.2.2.13
Objects supporting and from the ntnQosIfcActionTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosPolicyGroup 1.3.6.1.4.1.45.4.7.2.2.14
Objects supporting and from the ntnQosPolicyTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosCountActGroup 1.3.6.1.4.1.45.4.7.2.2.15
Objects supporting and from the ntnCountActTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosFilterStatsGroup 1.3.6.1.4.1.45.4.7.2.2.16
Objects from the ntnQosFilterStatsTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosPolicyDiagsGroup 1.3.6.1.4.1.45.4.7.2.2.17
Objects from the ntnQosPolicyDiagsTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosIfAssignmentGroup 1.3.6.1.4.1.45.4.7.2.2.18
Objects from the ntnQosIfAssignmentTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosIfQueueGroup 1.3.6.1.4.1.45.4.7.2.2.19
Objects from the ntnQosIfQueueTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosDscpToCosGroup 1.3.6.1.4.1.45.4.7.2.2.20
Objects from the ntnQosDscpToCosTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosCosToDscpGroup 1.3.6.1.4.1.45.4.7.2.2.21
Objects from the ntnQosCosToDscpTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosPrcSupportGroup 1.3.6.1.4.1.45.4.7.2.2.22
Objects from the ntnQosPrcSupportTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosPolicyDeviceIdentGroup 1.3.6.1.4.1.45.4.7.2.2.23
Objects from the ntnQosPolicyDeviceIdentTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosAgentConfigGroup 1.3.6.1.4.1.45.4.7.2.2.24
Objects used for QoS Policy Agent configuration.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosInterfaceRoleGroup 1.3.6.1.4.1.45.4.7.2.2.25
Objects from the ntnQosInterfaceRoleTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosUserRoleGroup 1.3.6.1.4.1.45.4.7.2.2.26
Objects from the ntnQosUserRoleTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosIfShapingGroup 1.3.6.1.4.1.45.4.7.2.2.27
Objects from the ntnQosIfShapingTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosDsAccessElemGroup 1.3.6.1.4.1.45.4.7.2.2.28
Objects supporting and from the ntnQosDsAccessElemTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosL2AccessElemGroup 1.3.6.1.4.1.45.4.7.2.2.29
Objects supporting and from the ntnQosL2AccessElemTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosAccessAsgnGroup 1.3.6.1.4.1.45.4.7.2.2.30
Objects supporting and from the ntnQosAccessAsgnTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosIfAppsGroup 1.3.6.1.4.1.45.4.7.2.2.31
Objects from the ntnQosIfAppsTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosUserPolicyGroup 1.3.6.1.4.1.45.4.7.2.2.32
Objects from the ntnQosUserPolicyTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosDsL2AccessElemGroup 1.3.6.1.4.1.45.4.7.2.2.33
Objects supporting and from the ntnQosDsL2AccessElemTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosCosShapingGroup 1.3.6.1.4.1.45.4.7.2.2.34
Objects from the ntnQosCosShapingTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosPolicyPrecResDiagsGroup 1.3.6.1.4.1.45.4.7.2.2.35
Objects from the ntnQosPolicyPrecResDiagsTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosQueueShapingGroup 1.3.6.1.4.1.45.4.7.2.2.36
Objects from the ntnQosQueueShapingTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosFilterSetStatsGroup 1.3.6.1.4.1.45.4.7.2.2.37
Objects from the ntnQosFilterSetStatsTable.
Status: current Access: read-only
OBJECT-GROUP    

avFcoeRedirGroup 1.3.6.1.4.1.45.4.7.2.2.38
Objects from the avFcoeRedirTable.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosQuickPolicyGroup 1.3.6.1.4.1.45.4.7.2.2.39
Objects from the ntnQosQuickPolicy support.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosFilterLimitingGroup 1.3.6.1.4.1.45.4.7.2.2.40
Objects from the ntnQosFilterLimiting support.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosDEIGroup 1.3.6.1.4.1.45.4.7.2.2.41
Objects from the ntnQosDEI support.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosMappingScalarsGroup 1.3.6.1.4.1.45.4.7.2.2.42
Objects from the ntnQosMapping support.
Status: current Access: read-only
OBJECT-GROUP    

ntnQosNotificationGroup 1.3.6.1.4.1.45.4.7.2.2.43
QoS-related notifications.
Status: current Access: read-only
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor