NTWS-AP-IF-MIB

File: NTWS-AP-IF-MIB.mib (5714 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
IANAifType-MIB NTWS-AP-TC NTWS-ROOT-MIB

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE Unsigned32 Gauge32
TEXTUAL-CONVENTION DisplayString MacAddress
IANAifType NtwsApSerialNum ntwsMibs

Defined Types

NtwsApInterfaceIndex  
A unique value, greater than zero, for each AP network interface.
TEXTUAL-CONVENTION    
  Unsigned32 1..1024  

NtwsApIfEntry  
SEQUENCE    
  ntwsApIfApSerialNum NtwsApSerialNum
  ntwsApIfIndex NtwsApInterfaceIndex
  ntwsApIfName DisplayString
  ntwsApIfType IANAifType
  ntwsApIfMtu Unsigned32
  ntwsApIfHighSpeed Gauge32
  ntwsApIfMac MacAddress

Defined Values

ntwsApIfMib 1.3.6.1.4.1.45.6.1.4.16
AP network Interface objects for Nortel Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2009 Nortel Networks. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

ntwsApIfMibObjects 1.3.6.1.4.1.45.6.1.4.16.1
OBJECT IDENTIFIER    

ntwsApIfTable 1.3.6.1.4.1.45.6.1.4.16.1.1
A table describing the network interfaces on all the APs currently present and managed by this AC (APs in ''ALIVE'' state).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtwsApIfEntry

ntwsApIfEntry 1.3.6.1.4.1.45.6.1.4.16.1.1.1
Information about a particular network interface on an AP attached to the AC.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtwsApIfEntry  

ntwsApIfApSerialNum 1.3.6.1.4.1.45.6.1.4.16.1.1.1.1
The Serial Number of the AP containing this network interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtwsApSerialNum  

ntwsApIfIndex 1.3.6.1.4.1.45.6.1.4.16.1.1.1.2
A unique value, greater than zero, for each AP network interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtwsApInterfaceIndex  

ntwsApIfName 1.3.6.1.4.1.45.6.1.4.16.1.1.1.3
The textual name of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ntwsApIfType 1.3.6.1.4.1.45.6.1.4.16.1.1.1.4
The type of AP network interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  IANAifType  

ntwsApIfMtu 1.3.6.1.4.1.45.6.1.4.16.1.1.1.5
The size of the largest packet which can be sent/received on the interface, specified in octets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntwsApIfHighSpeed 1.3.6.1.4.1.45.6.1.4.16.1.1.1.6
The nominal bandwidth of AP network interfaces in units of 1,000,000 bits per second.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ntwsApIfMac 1.3.6.1.4.1.45.6.1.4.16.1.1.1.7
The MAC address of this network interface.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

ntwsApIfConformance 1.3.6.1.4.1.45.6.1.4.16.2
OBJECT IDENTIFIER    

ntwsApIfCompliances 1.3.6.1.4.1.45.6.1.4.16.2.1
OBJECT IDENTIFIER    

ntwsApIfGroups 1.3.6.1.4.1.45.6.1.4.16.2.2
OBJECT IDENTIFIER    

ntwsApIfCompliance 1.3.6.1.4.1.45.6.1.4.16.2.1.1
The compliance statement for devices that implement AP If MIB. This compliance statement is for releases 7.1 and greater of AC (wireless switch) software.
Status: current Access: read-only
MODULE-COMPLIANCE    

ntwsApIfBasicGroup 1.3.6.1.4.1.45.6.1.4.16.2.2.1
Group of columnar objects implemented to provide basic Interface info in releases 7.1 and greater.
Status: current Access: read-only
OBJECT-GROUP