Nortel-Magellan-Passport-BaseSnmpMIB

File: Nortel-Magellan-Passport-BaseSnmpMIB.mib (107050 bytes)

Imported modules

RFC-1212	RFC1155-SMI	Nortel-Magellan-Passport-UsefulDefinitionsMIB
Nortel-Magellan-Passport-StandardTextualConventionsMIB	Nortel-Magellan-Passport-TextualConventionsMIB	Nortel-Magellan-Passport-VirtualRouterMIB

Imported symbols

OBJECT-TYPE	IpAddress	passportMIBs
TruthValue	DisplayString	StorageType
RowStatus	Status	Integer32
Unsigned32	AsciiString	NonReplicated
HexString	vrIndex	vr

Defined Types

VrSnmpRowStatusEntry
SEQUENCE
	vrSnmpRowStatus	RowStatus
	vrSnmpComponentName	DisplayString
	vrSnmpStorageType	StorageType
	vrSnmpIndex	NonReplicated

VrSnmpProvEntry
SEQUENCE
	vrSnmpV1EnableAuthenTraps	Status
	vrSnmpV2EnableAuthenTraps	Status
	vrSnmpAlarmsAsTraps	Status
	vrSnmpIpStack	INTEGER
	vrSnmpCidInEntTraps	Status

VrSnmpStateEntry
SEQUENCE
	vrSnmpAdminState	INTEGER
	vrSnmpOperationalState	INTEGER
	vrSnmpUsageState	INTEGER
	vrSnmpAvailabilityStatus	OCTET STRING
	vrSnmpProceduralStatus	OCTET STRING
	vrSnmpControlStatus	OCTET STRING
	vrSnmpAlarmStatus	OCTET STRING
	vrSnmpStandbyStatus	INTEGER
	vrSnmpUnknownStatus	INTEGER

VrSnmpStatsEntry
SEQUENCE
	vrSnmpLastOrChange	Unsigned32
	vrSnmpTrapsProcessed	Unsigned32
	vrSnmpTrapsDiscarded	Unsigned32
	vrSnmpLastAuthFailure	Unsigned32
	vrSnmpMgrOfLastAuthFailure	IpAddress

VrSnmpSysRowStatusEntry
SEQUENCE
	vrSnmpSysRowStatus	RowStatus
	vrSnmpSysComponentName	DisplayString
	vrSnmpSysStorageType	StorageType
	vrSnmpSysIndex	NonReplicated

VrSnmpSysProvEntry
SEQUENCE
	vrSnmpSysContact	AsciiString
	vrSnmpSysName	AsciiString
	vrSnmpSysLocation	AsciiString

VrSnmpSysOpEntry
SEQUENCE
	vrSnmpSysDescription	AsciiString
	vrSnmpSysObjectId	OBJECT IDENTIFIER
	vrSnmpSysUpTime	Unsigned32
	vrSnmpSysServices	Unsigned32

VrSnmpComRowStatusEntry
SEQUENCE
	vrSnmpComRowStatus	RowStatus
	vrSnmpComComponentName	DisplayString
	vrSnmpComStorageType	StorageType
	vrSnmpComIndex	Integer32

VrSnmpComProvEntry
SEQUENCE
	vrSnmpComCommunityString	AsciiString
	vrSnmpComAccessMode	INTEGER
	vrSnmpComViewIndex	Unsigned32
	vrSnmpComTDomain	INTEGER

VrSnmpComManRowStatusEntry
SEQUENCE
	vrSnmpComManRowStatus	RowStatus
	vrSnmpComManComponentName	DisplayString
	vrSnmpComManStorageType	StorageType
	vrSnmpComManIndex	Integer32

VrSnmpComManProvEntry
SEQUENCE
	vrSnmpComManTransportAddress	AsciiString
	vrSnmpComManPrivileges	OCTET STRING

VrSnmpAclRowStatusEntry
SEQUENCE
	vrSnmpAclRowStatus	RowStatus
	vrSnmpAclComponentName	DisplayString
	vrSnmpAclStorageType	StorageType
	vrSnmpAclTargetIndex	Integer32
	vrSnmpAclSubjectIndex	Integer32
	vrSnmpAclResourcesIndex	Integer32

VrSnmpAclProvEntry
SEQUENCE
	vrSnmpAclPrivileges	OCTET STRING
	vrSnmpAclRowStorageType	INTEGER
	vrSnmpAclStdRowStatus	INTEGER

VrSnmpPartyRowStatusEntry
SEQUENCE
	vrSnmpPartyRowStatus	RowStatus
	vrSnmpPartyComponentName	DisplayString
	vrSnmpPartyStorageType	StorageType
	vrSnmpPartyIdentityIndex	OBJECT IDENTIFIER

VrSnmpPartyProvEntry
SEQUENCE
	vrSnmpPartyStdIndex	Unsigned32
	vrSnmpPartyTDomain	INTEGER
	vrSnmpPartyTransportAddress	AsciiString
	vrSnmpPartyMaxMessageSize	Unsigned32
	vrSnmpPartyLocal	TruthValue
	vrSnmpPartyAuthProtocol	INTEGER
	vrSnmpPartyAuthPrivate	HexString
	vrSnmpPartyAuthPublic	HexString
	vrSnmpPartyAuthLifetime	Unsigned32
	vrSnmpPartyPrivProtocol	INTEGER
	vrSnmpPartyRowStorageType	INTEGER
	vrSnmpPartyStdRowStatus	INTEGER

VrSnmpPartyOpEntry
SEQUENCE
	vrSnmpPartyTrapNumbers	Unsigned32
	vrSnmpPartyAuthClock	Unsigned32

VrSnmpConRowStatusEntry
SEQUENCE
	vrSnmpConRowStatus	RowStatus
	vrSnmpConComponentName	DisplayString
	vrSnmpConStorageType	StorageType
	vrSnmpConIdentityIndex	OBJECT IDENTIFIER

VrSnmpConProvEntry
SEQUENCE
	vrSnmpConStdIndex	Unsigned32
	vrSnmpConLocal	INTEGER
	vrSnmpConViewIndex	Unsigned32
	vrSnmpConLocalTime	INTEGER
	vrSnmpConRowStorageType	INTEGER
	vrSnmpConStdRowStatus	INTEGER

VrSnmpViewRowStatusEntry
SEQUENCE
	vrSnmpViewRowStatus	RowStatus
	vrSnmpViewComponentName	DisplayString
	vrSnmpViewStorageType	StorageType
	vrSnmpViewIndex	Integer32
	vrSnmpViewSubtreeIndex	OBJECT IDENTIFIER

VrSnmpViewProvEntry
SEQUENCE
	vrSnmpViewMask	HexString
	vrSnmpViewType	INTEGER
	vrSnmpViewRowStorageType	INTEGER
	vrSnmpViewStdRowStatus	INTEGER

VrSnmpOrRowStatusEntry
SEQUENCE
	vrSnmpOrRowStatus	RowStatus
	vrSnmpOrComponentName	DisplayString
	vrSnmpOrStorageType	StorageType
	vrSnmpOrIndex	Integer32

VrSnmpOrOrEntry
SEQUENCE
	vrSnmpOrId	OBJECT IDENTIFIER
	vrSnmpOrDescr	AsciiString

VrSnmpV2StatsRowStatusEntry
SEQUENCE
	vrSnmpV2StatsRowStatus	RowStatus
	vrSnmpV2StatsComponentName	DisplayString
	vrSnmpV2StatsStorageType	StorageType
	vrSnmpV2StatsIndex	NonReplicated

VrSnmpV2StatsStatsEntry
SEQUENCE
	vrSnmpV2StatsPackets	Unsigned32
	vrSnmpV2StatsEncodingErrors	Unsigned32
	vrSnmpV2StatsUnknownSrcParties	Unsigned32
	vrSnmpV2StatsBadAuths	Unsigned32
	vrSnmpV2StatsNotInLifetime	Unsigned32
	vrSnmpV2StatsWrongDigestValues	Unsigned32
	vrSnmpV2StatsUnknownContexts	Unsigned32
	vrSnmpV2StatsBadOperations	Unsigned32
	vrSnmpV2StatsSilentDrops	Unsigned32

VrSnmpV1StatsRowStatusEntry
SEQUENCE
	vrSnmpV1StatsRowStatus	RowStatus
	vrSnmpV1StatsComponentName	DisplayString
	vrSnmpV1StatsStorageType	StorageType
	vrSnmpV1StatsIndex	NonReplicated

VrSnmpV1StatsStatsEntry
SEQUENCE
	vrSnmpV1StatsBadCommunityNames	Unsigned32
	vrSnmpV1StatsBadCommunityUses	Unsigned32

VrSnmpMibIIStatsRowStatusEntry
SEQUENCE
	vrSnmpMibIIStatsRowStatus	RowStatus
	vrSnmpMibIIStatsComponentName	DisplayString
	vrSnmpMibIIStatsStorageType	StorageType
	vrSnmpMibIIStatsIndex	NonReplicated

VrSnmpMibIIStatsStatsEntry
SEQUENCE
	vrSnmpMibIIStatsInPackets	Unsigned32
	vrSnmpMibIIStatsInBadCommunityNames	Unsigned32
	vrSnmpMibIIStatsInBadCommunityUses	Unsigned32
	vrSnmpMibIIStatsInAsnParseErrs	Unsigned32
	vrSnmpMibIIStatsOutPackets	Unsigned32
	vrSnmpMibIIStatsInBadVersions	Unsigned32
	vrSnmpMibIIStatsInTotalReqVars	Unsigned32
	vrSnmpMibIIStatsInTotalSetVars	Unsigned32
	vrSnmpMibIIStatsInGetRequests	Unsigned32
	vrSnmpMibIIStatsInGetNexts	Unsigned32
	vrSnmpMibIIStatsInSetRequests	Unsigned32
	vrSnmpMibIIStatsOutTooBigs	Unsigned32
	vrSnmpMibIIStatsOutNoSuchNames	Unsigned32
	vrSnmpMibIIStatsOutBadValues	Unsigned32
	vrSnmpMibIIStatsOutGenErrs	Unsigned32
	vrSnmpMibIIStatsOutGetResponses	Unsigned32
	vrSnmpMibIIStatsOutTraps	Unsigned32

VrInitSnmpConfigRowStatusEntry
SEQUENCE
	vrInitSnmpConfigRowStatus	RowStatus
	vrInitSnmpConfigComponentName	DisplayString
	vrInitSnmpConfigStorageType	StorageType
	vrInitSnmpConfigIndex	NonReplicated

VrInitSnmpConfigProvEntry
SEQUENCE
	vrInitSnmpConfigAgentAddress	AsciiString
	vrInitSnmpConfigManagerAddress	AsciiString

Defined Values

baseSnmpMIB		1.3.6.1.4.1.562.2.4.2.36
OBJECT IDENTIFIER

vrSnmp		1.3.6.1.4.1.562.2.4.1.100.8
OBJECT IDENTIFIER

vrSnmpRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.8.1
This entry controls the addition and deletion of vrSnmp components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpRowStatusEntry

vrSnmpRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.8.1.1
A single entry in the table represents a single vrSnmp component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpRowStatusEntry

vrSnmpRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.1.1.1
This variable is used as the basis for SNMP naming of vrSnmp components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

vrSnmpComponentName		1.3.6.1.4.1.562.2.4.1.100.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

vrSnmpStorageType		1.3.6.1.4.1.562.2.4.1.100.8.1.1.4
This variable represents the storage type value for the vrSnmp tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

vrSnmpIndex		1.3.6.1.4.1.562.2.4.1.100.8.1.1.10
This variable represents the index for the vrSnmp tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

vrSnmpProvTable		1.3.6.1.4.1.562.2.4.1.100.8.20
This group contains provisionable attributes defining the SNMP management entity's capabilities, particularly in regards to standardV1 and V2 traps.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpProvEntry

vrSnmpProvEntry		1.3.6.1.4.1.562.2.4.1.100.8.20.1
An entry in the vrSnmpProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpProvEntry

vrSnmpV1EnableAuthenTraps		1.3.6.1.4.1.562.2.4.1.100.8.20.1.1
This attribute controls whether the Snmp component will generate V1 authentication failure traps or not. The attribute is derived from rfc1213.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Status

vrSnmpV2EnableAuthenTraps		1.3.6.1.4.1.562.2.4.1.100.8.20.1.2
This attribute controls whether the Snmp component will generate V2 authentication failure traps or not. The attribute is derived from rfc1450.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Status

vrSnmpAlarmsAsTraps		1.3.6.1.4.1.562.2.4.1.100.8.20.1.3
This attribute controls whether the Snmp component will send Alarms as SNMPv1 and SNMPv2 Traps. If enabled, Alarms will be sent as SNMPv2 Traps to target Parties identified in AccessPrivileges components where v2Trap privileges are allowed, and as SNMPv1 Traps to Managers with v1Trap privileges allowed.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Status

vrSnmpIpStack		1.3.6.1.4.1.562.2.4.1.100.8.20.1.4
This attribute controls which IP stack the Snmp component will use to send and receive Snmp traffic for Communites and Parties whose tdomain attribute specifies snmpUdpDomain as the transport protocol. If the value of this attribute is vrIp then Snmp Udp traffic will be sent and received using Ip as provisioned under the VirtualRouter. This requires provisioning of the ip feature. If the value of this attribute is ipiFrIpiVc then Snmp Udp traffic will be sent and received using IpiFr (Ip over Frame Relay) or IpiVc (Ip over Vc), whichever is provisioned. This requires provisioning of one of the ipiVc or ipiFr features.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	vrIp(1), ipiFrIpiVc(2)

vrSnmpCidInEntTraps		1.3.6.1.4.1.562.2.4.1.100.8.20.1.5
This attribute controls whether the Customer Identifier (CID) will be included in the SNMP Enterprise Traps. If enabled, the CID will be included in the SNMP Enterprise traps.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Status

vrSnmpStateTable		1.3.6.1.4.1.562.2.4.1.100.8.21
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpStateEntry

vrSnmpStateEntry		1.3.6.1.4.1.562.2.4.1.100.8.21.1
An entry in the vrSnmpStateTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpStateEntry

vrSnmpAdminState		1.3.6.1.4.1.562.2.4.1.100.8.21.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	locked(0), unlocked(1), shuttingDown(2)

vrSnmpOperationalState		1.3.6.1.4.1.562.2.4.1.100.8.21.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

vrSnmpUsageState		1.3.6.1.4.1.562.2.4.1.100.8.21.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(0), active(1), busy(2)

vrSnmpAvailabilityStatus		1.3.6.1.4.1.562.2.4.1.100.8.21.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

vrSnmpProceduralStatus		1.3.6.1.4.1.562.2.4.1.100.8.21.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

vrSnmpControlStatus		1.3.6.1.4.1.562.2.4.1.100.8.21.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

vrSnmpAlarmStatus		1.3.6.1.4.1.562.2.4.1.100.8.21.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

vrSnmpStandbyStatus		1.3.6.1.4.1.562.2.4.1.100.8.21.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hotStandby(0), coldStandby(1), providingService(2), notSet(15)

vrSnmpUnknownStatus		1.3.6.1.4.1.562.2.4.1.100.8.21.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

vrSnmpStatsTable		1.3.6.1.4.1.562.2.4.1.100.8.22
This attribute group contains miscellaneous SNMP management entity operational attributes. Statistics in the group are derived from rfc 1450 and rfc 1213. Also included in the group are statistics due to non-SNMP authorization errors, and non-SNMP statistics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpStatsEntry

vrSnmpStatsEntry		1.3.6.1.4.1.562.2.4.1.100.8.22.1
An entry in the vrSnmpStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpStatsEntry

vrSnmpLastOrChange		1.3.6.1.4.1.562.2.4.1.100.8.22.1.1
This attribute indicates the value of sysUpTime (in 1/100's of a second) at the time of the most recent change to a SNMPv2 Object Resource entry. The attribute forms part of the SNMPv2 MIB Base Object Resource Group found in rfc1450.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpTrapsProcessed		1.3.6.1.4.1.562.2.4.1.100.8.22.1.2
This counter contains the cumulative number of Trap Indications and Alarm Indications received from the DCS Collectors since the processor last restarted. These Traps and Alarms are sent to SNMPv1 Managers and SNMPv2 Parties which are configured to receive Traps. This total includes the number discarded by the Snmp component when it was locked or disabled.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpTrapsDiscarded		1.3.6.1.4.1.562.2.4.1.100.8.22.1.3
This counter contains the cumulative number of Trap Indications and Alarm Indications discarded since the processor last restarted. They are discarded when the Snmp component is locked or disabled.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpLastAuthFailure		1.3.6.1.4.1.562.2.4.1.100.8.22.1.4
This attribute indicates the value of sysUpTime (in 1/100's of a second) at the time the last authentication failure. This attribute is a non-SNMP statistic.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMgrOfLastAuthFailure		1.3.6.1.4.1.562.2.4.1.100.8.22.1.5
This attribute indicates the IP address of the manager station that caused the last authentication failure. This attribute is a non-SNMP statistic.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

vrSnmpSys		1.3.6.1.4.1.562.2.4.1.100.8.2
OBJECT IDENTIFIER

vrSnmpSysRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.8.2.1
This entry controls the addition and deletion of vrSnmpSys components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpSysRowStatusEntry

vrSnmpSysRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.8.2.1.1
A single entry in the table represents a single vrSnmpSys component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpSysRowStatusEntry

vrSnmpSysRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.2.1.1.1
This variable is used as the basis for SNMP naming of vrSnmpSys components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

vrSnmpSysComponentName		1.3.6.1.4.1.562.2.4.1.100.8.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

vrSnmpSysStorageType		1.3.6.1.4.1.562.2.4.1.100.8.2.1.1.4
This variable represents the storage type value for the vrSnmpSys tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

vrSnmpSysIndex		1.3.6.1.4.1.562.2.4.1.100.8.2.1.1.10
This variable represents the index for the vrSnmpSys tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

vrSnmpSysProvTable		1.3.6.1.4.1.562.2.4.1.100.8.2.10
The group contains provisionable attributes relating to the SNMP System Group. The attributes are derived from rfc1213.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpSysProvEntry

vrSnmpSysProvEntry		1.3.6.1.4.1.562.2.4.1.100.8.2.10.1
An entry in the vrSnmpSysProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpSysProvEntry

vrSnmpSysContact		1.3.6.1.4.1.562.2.4.1.100.8.2.10.1.1
This attribute identifies the contact person for this managed node, together with information on how to contact this person.
Status: mandatory	Access: read-write
OBJECT-TYPE
	AsciiString	Size(0..255)

vrSnmpSysName		1.3.6.1.4.1.562.2.4.1.100.8.2.10.1.2
This attribute identifies the administratively assigned name for this managed node. By convention, it is the node's fully qualified domain name.
Status: mandatory	Access: read-write
OBJECT-TYPE
	AsciiString	Size(0..255)

vrSnmpSysLocation		1.3.6.1.4.1.562.2.4.1.100.8.2.10.1.3
This attribute identifies the physical location of this node. For example, 'telephone closet, third floor'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	AsciiString	Size(0..255)

vrSnmpSysOpTable		1.3.6.1.4.1.562.2.4.1.100.8.2.11
The group contains operational attributes relating to the SNMP System Group. The attributes are derived from rfc1213.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpSysOpEntry

vrSnmpSysOpEntry		1.3.6.1.4.1.562.2.4.1.100.8.2.11.1
An entry in the vrSnmpSysOpTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpSysOpEntry

vrSnmpSysDescription		1.3.6.1.4.1.562.2.4.1.100.8.2.11.1.1
This attribute presents a textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.
Status: mandatory	Access: read-only
OBJECT-TYPE
	AsciiString	Size(0..255)

vrSnmpSysObjectId		1.3.6.1.4.1.562.2.4.1.100.8.2.11.1.2
This attribute identifies the vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the Structure of Management Information (SMI) enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining 'what kind of box' is being managed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

vrSnmpSysUpTime		1.3.6.1.4.1.562.2.4.1.100.8.2.11.1.3
This attribute represents the time (in hundredths of a second) since the network management portion of the system was last re- initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpSysServices		1.3.6.1.4.1.562.2.4.1.100.8.2.11.1.4
This attribute indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L-1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 ((2^4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer 1 - physical (for example, repeaters) layer 2 - datalink/subnetwork (for example, bridges) layer 3 - internet (for example, IP gateways) layer 4 - end-to-end (for example, IP hosts) layer 7 - applications (for example, mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..127

vrSnmpCom		1.3.6.1.4.1.562.2.4.1.100.8.3
OBJECT IDENTIFIER

vrSnmpComRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.8.3.1
This entry controls the addition and deletion of vrSnmpCom components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpComRowStatusEntry

vrSnmpComRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.8.3.1.1
A single entry in the table represents a single vrSnmpCom component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpComRowStatusEntry

vrSnmpComRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.3.1.1.1
This variable is used as the basis for SNMP naming of vrSnmpCom components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

vrSnmpComComponentName		1.3.6.1.4.1.562.2.4.1.100.8.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

vrSnmpComStorageType		1.3.6.1.4.1.562.2.4.1.100.8.3.1.1.4
This variable represents the storage type value for the vrSnmpCom tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

vrSnmpComIndex		1.3.6.1.4.1.562.2.4.1.100.8.3.1.1.10
This variable represents the index for the vrSnmpCom tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Integer32	1..1024

vrSnmpComProvTable		1.3.6.1.4.1.562.2.4.1.100.8.3.10
The group contains provisionable attributes relating to SNMPv1 Communities.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpComProvEntry

vrSnmpComProvEntry		1.3.6.1.4.1.562.2.4.1.100.8.3.10.1
An entry in the vrSnmpComProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpComProvEntry

vrSnmpComCommunityString		1.3.6.1.4.1.562.2.4.1.100.8.3.10.1.1
This attribute is the SNMPv1 Community name. The value of this attribute is used to authenticate SNMP messages received from SNMPv1 management entities, and is placed in SNMP messages sent out by the SNMPv1 network management entity. The string 'public' is commonly used. When an SNMPv1 message is received, the community name in the message is checked to ensure that it matches a Community string. If there are no Manager subcomponents for that Community then the level of access is determined by the accessMode attribute. If there are Manager subcomponents for the Community then the originating transport address in the message must match the transportAddress of one of the Manager subcomponents, and the level of access of the sending entity is determined by the privileges attribute for that Manager. The combination of communityString and tDomain attributes must be unique across all Communies.
Status: mandatory	Access: read-write
OBJECT-TYPE
	AsciiString	Size(1..255)

vrSnmpComAccessMode		1.3.6.1.4.1.562.2.4.1.100.8.3.10.1.3
Once the sending SNMP entity is authenticated as a member of a community, the community access mode determines what level of access it has for each object in its view.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	readOnly(1), readWrite(2)

vrSnmpComViewIndex		1.3.6.1.4.1.562.2.4.1.100.8.3.10.1.4
The community view index selects an entry in the SnmpViewTable that this community will use. This index must correspond to the first index of one of the SnmpView entries. Note that SNMPv2 Views are used for SNMPv1 communities, as the SNMPv2 View model is sufficiently general to handle the SNMPv1 case.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	1..1024

vrSnmpComTDomain		1.3.6.1.4.1.562.2.4.1.100.8.3.10.1.5
This attribute indicates the kind of transport service by which the community receives and sends network management traffic. The combination of communityString and tDomain attributes must be unique across all Communies
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	snmpUdpDomain(1)

vrSnmpComMan		1.3.6.1.4.1.562.2.4.1.100.8.3.2
OBJECT IDENTIFIER

vrSnmpComManRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.8.3.2.1
This entry controls the addition and deletion of vrSnmpComMan components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpComManRowStatusEntry

vrSnmpComManRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.8.3.2.1.1
A single entry in the table represents a single vrSnmpComMan component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpComManRowStatusEntry

vrSnmpComManRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.3.2.1.1.1
This variable is used as the basis for SNMP naming of vrSnmpComMan components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

vrSnmpComManComponentName		1.3.6.1.4.1.562.2.4.1.100.8.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

vrSnmpComManStorageType		1.3.6.1.4.1.562.2.4.1.100.8.3.2.1.1.4
This variable represents the storage type value for the vrSnmpComMan tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

vrSnmpComManIndex		1.3.6.1.4.1.562.2.4.1.100.8.3.2.1.1.10
This variable represents the index for the vrSnmpComMan tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Integer32	0..100

vrSnmpComManProvTable		1.3.6.1.4.1.562.2.4.1.100.8.3.2.10
The group contains provisionable attributes relating to an SNMPv1 Community Manager.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpComManProvEntry

vrSnmpComManProvEntry		1.3.6.1.4.1.562.2.4.1.100.8.3.2.10.1
An entry in the vrSnmpComManProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpComManProvEntry

vrSnmpComManTransportAddress		1.3.6.1.4.1.562.2.4.1.100.8.3.2.10.1.1
This attribute is the transport service address of SNMPv1 Manager, formatted according to the value of SnmpV1Community tDomain. The only currently supported format is that of a UDP Transport Address. It must be of the form 'IpAddress-UDP Port', where UDP Port = 162. For example, 23.45.67.89-162 is a suitable UDP Transport Address. The value of transportAddress must be unique for all Manager components under the same Community.
Status: mandatory	Access: read-write
OBJECT-TYPE
	AsciiString	Size(1..100)

vrSnmpComManPrivileges		1.3.6.1.4.1.562.2.4.1.100.8.3.2.10.1.2
This attribute identifies the access privileges which govern what management operations the SNMPv1 Manager may perform. v1trap operations are only allowed if the Community accessMode is readOnly or readWrite. set operations are only allowed if the Community accessMode is readWrite. get operations are only allowed if the Community accessMode is readOnly or readWrite. Description of bits: sets(0) gets(1) v1trap(2)
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1)

vrSnmpAcl		1.3.6.1.4.1.562.2.4.1.100.8.4
OBJECT IDENTIFIER

vrSnmpAclRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.8.4.1
This entry controls the addition and deletion of vrSnmpAcl components.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpAclRowStatusEntry

vrSnmpAclRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.8.4.1.1
A single entry in the table represents a single vrSnmpAcl component.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VrSnmpAclRowStatusEntry

vrSnmpAclRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.4.1.1.1
This variable is used as the basis for SNMP naming of vrSnmpAcl components. These components can be added and deleted.
Status: obsolete	Access: read-write
OBJECT-TYPE
	RowStatus

vrSnmpAclComponentName		1.3.6.1.4.1.562.2.4.1.100.8.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: obsolete	Access: read-only
OBJECT-TYPE
	DisplayString

vrSnmpAclStorageType		1.3.6.1.4.1.562.2.4.1.100.8.4.1.1.4
This variable represents the storage type value for the vrSnmpAcl tables.
Status: obsolete	Access: read-only
OBJECT-TYPE
	StorageType

vrSnmpAclTargetIndex		1.3.6.1.4.1.562.2.4.1.100.8.4.1.1.10
This variable represents an index for the vrSnmpAcl tables.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2048

vrSnmpAclSubjectIndex		1.3.6.1.4.1.562.2.4.1.100.8.4.1.1.11
This variable represents an index for the vrSnmpAcl tables.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2048

vrSnmpAclResourcesIndex		1.3.6.1.4.1.562.2.4.1.100.8.4.1.1.12
This variable represents an index for the vrSnmpAcl tables.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2048

vrSnmpAclProvTable		1.3.6.1.4.1.562.2.4.1.100.8.4.10
This group contains provisionable attributes relating to SNMPv2 Access Privilege Table Entries. The provisionable attributes are derived from rfc1445, and rfc1447.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpAclProvEntry

vrSnmpAclProvEntry		1.3.6.1.4.1.562.2.4.1.100.8.4.10.1
An entry in the vrSnmpAclProvTable.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VrSnmpAclProvEntry

vrSnmpAclPrivileges		1.3.6.1.4.1.562.2.4.1.100.8.4.10.1.1
This attribute identifies the access privileges which govern what management operations a particular target part may perform with respect to a particular SNMPv2 context when requested by a particular subject party. Gets and set operations are only permitted if the target Party is local (SnmpV2PartyEntryProv local = true). Response and v2trap operations are only permitted if the target Party is non-local (SnmpV2PartyEntryProv local = false). Description of bits: response(0) set(1) gets(2) v2trap(3)
Status: obsolete	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1)

vrSnmpAclRowStorageType		1.3.6.1.4.1.562.2.4.1.100.8.4.10.1.2
This attribute indicates the storage type for this conceptual row in the SNMPv2 aclTable. This is a constant - nonVolatile.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	nonVolatile(3)

vrSnmpAclStdRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.4.10.1.3
This attribute indicates the status of this conceptual row in the SNMPv2 aclTable. This is a constant - active.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	active(1)

vrSnmpParty		1.3.6.1.4.1.562.2.4.1.100.8.5
OBJECT IDENTIFIER

vrSnmpPartyRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.8.5.1
This entry controls the addition and deletion of vrSnmpParty components.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpPartyRowStatusEntry

vrSnmpPartyRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.8.5.1.1
A single entry in the table represents a single vrSnmpParty component.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VrSnmpPartyRowStatusEntry

vrSnmpPartyRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.5.1.1.1
This variable is used as the basis for SNMP naming of vrSnmpParty components. These components can be added and deleted.
Status: obsolete	Access: read-write
OBJECT-TYPE
	RowStatus

vrSnmpPartyComponentName		1.3.6.1.4.1.562.2.4.1.100.8.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: obsolete	Access: read-only
OBJECT-TYPE
	DisplayString

vrSnmpPartyStorageType		1.3.6.1.4.1.562.2.4.1.100.8.5.1.1.4
This variable represents the storage type value for the vrSnmpParty tables.
Status: obsolete	Access: read-only
OBJECT-TYPE
	StorageType

vrSnmpPartyIdentityIndex		1.3.6.1.4.1.562.2.4.1.100.8.5.1.1.10
This variable represents the index for the vrSnmpParty tables.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	OBJECT IDENTIFIER

vrSnmpPartyProvTable		1.3.6.1.4.1.562.2.4.1.100.8.5.10
This group contains provisionable attributes relating to SNMPv2 Party Table Entries.The attributes are derived from rfc1321, rfc1445, rfc1446, rfc1447, and rfc1450.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpPartyProvEntry

vrSnmpPartyProvEntry		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1
An entry in the vrSnmpPartyProvTable.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VrSnmpPartyProvEntry

vrSnmpPartyStdIndex		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1.1
This attribute represents the SNMPv2 Party table partyIndex. This index is unique and its value is automatically selected for you.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	1..2048

vrSnmpPartyTDomain		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1.2
This attribute indicates the kind of transport service by which the party receives and sends network management traffic.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	snmpUdpDomain(1)

vrSnmpPartyTransportAddress		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1.3
This attribute is the transport service address by which the party receives network management traffic, formatted according to the corresponding value of tDomain. For local (Agent) Parties (SnmpV2PartyEntryProv local = true) this is the address of the Virtual Router. For non-local (Manager) Parties (SnmpV2PartyEntryProv local = false) this is the address of the SNMP Manager. The only currently supported format is that of a UDP Transport Address. It must be of the form 'IpAddress-UDP Port', where UDP Port = 161 for a local Party and UDP Port = 162 for a non-local Party. For example, 23.45.67.89-161 or 23.45.67.89-162 are suitable UDP Transport Addresses.
Status: obsolete	Access: read-write
OBJECT-TYPE
	AsciiString	Size(1..100)

vrSnmpPartyMaxMessageSize		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1.4
This attribute is the maximum length in octets of a SNMPv2 message that this party will accept. For local (Agent) Parties (SnmpV2PartyEntryProv local = true) this cannot be set to greater than the fixed Agent maximum of 1400. For non-local (Manager) Parties (SnmpV2PartyEntryProv local = false) the maximum is 65507.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32	484..65507

vrSnmpPartyLocal		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1.5
This attribute indicates whether this party executes at this SNMPv2 entity. If this attribute has a value of true, then the SNMPv2 entity is an Agent, and will listen for SNMPv2 messages on the ipAddress associated with this party. If this attribute has the value false, then the SNMPv2 entity is a Manager.
Status: obsolete	Access: read-write
OBJECT-TYPE
	TruthValue

vrSnmpPartyAuthProtocol		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1.6
This attribute indicates the authentication protocol by which all messages generated by the party are authenticated as to origin and integrity. The value noAuth signifies that messages generated by the party are not authenticated.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	noAuth(1), v2Md5AuthProtocol(4)

vrSnmpPartyAuthPrivate		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1.7
This attribute is the Party's private authentication key. As with passwords this attribute cannot be displayed by the display command and is stored in encoded form. For Parties with an authentication protocol, this key must be provisioned.
Status: obsolete	Access: write-only
OBJECT-TYPE
	HexString	Size(0..16)

vrSnmpPartyAuthPublic		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1.8
This attribute is the Party's public authentication key. It is the 'public information' used by the Party's authentication protocol.
Status: obsolete	Access: read-write
OBJECT-TYPE
	HexString	Size(0..16)

vrSnmpPartyAuthLifetime		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1.9
This attribute represents the maximum acceptable delivery delay (lifetime) in seconds for messages from this Party.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32	0..2147483647

vrSnmpPartyPrivProtocol		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1.10
This attribute identifies the privacy protocol by which all protocol messages received by the party are protected from disclosure. The value noPriv signifies that messages received by the party are not protected. As DES is not supported, this is a constant noPriv.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	noPriv(2)

vrSnmpPartyRowStorageType		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1.11
The attribute indicates the storage type for this conceptual row in the SNMPv2 aclTable. This is a constant - nonVolatile.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	nonVolatile(3)

vrSnmpPartyStdRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.5.10.1.12
This attribute indicates the status of this conceptual row in the SNMPv2 partyTable. This is a constant - active.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	active(1)

vrSnmpPartyOpTable		1.3.6.1.4.1.562.2.4.1.100.8.5.11
This group contains Operational Attributes relating SNMPv2 parties. based upon rfc1321, rfc1445, rfc1446, rfc1447, and rfc1450.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpPartyOpEntry

vrSnmpPartyOpEntry		1.3.6.1.4.1.562.2.4.1.100.8.5.11.1
An entry in the vrSnmpPartyOpTable.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VrSnmpPartyOpEntry

vrSnmpPartyTrapNumbers		1.3.6.1.4.1.562.2.4.1.100.8.5.11.1.1
This attribute is a count of the total number of SNMPv2 traps sent to a SNMPv2 non-Local (Manager) party (SnmpV2PartyEntryProv local = false). This counter is never incremented for Local (Agent) parties (SnmpV2PartyEntryProv local = true).
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpPartyAuthClock		1.3.6.1.4.1.562.2.4.1.100.8.5.11.1.2
This attribute is the authentication clock which represents the notion of current time specific to a Party. This value is not permitted to 'roll-over'. In other words once it reaches the maximum it stays there, unless explicitly decremented.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpCon		1.3.6.1.4.1.562.2.4.1.100.8.6
OBJECT IDENTIFIER

vrSnmpConRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.8.6.1
This entry controls the addition and deletion of vrSnmpCon components.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpConRowStatusEntry

vrSnmpConRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.8.6.1.1
A single entry in the table represents a single vrSnmpCon component.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VrSnmpConRowStatusEntry

vrSnmpConRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.6.1.1.1
This variable is used as the basis for SNMP naming of vrSnmpCon components. These components can be added and deleted.
Status: obsolete	Access: read-write
OBJECT-TYPE
	RowStatus

vrSnmpConComponentName		1.3.6.1.4.1.562.2.4.1.100.8.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: obsolete	Access: read-only
OBJECT-TYPE
	DisplayString

vrSnmpConStorageType		1.3.6.1.4.1.562.2.4.1.100.8.6.1.1.4
This variable represents the storage type value for the vrSnmpCon tables.
Status: obsolete	Access: read-only
OBJECT-TYPE
	StorageType

vrSnmpConIdentityIndex		1.3.6.1.4.1.562.2.4.1.100.8.6.1.1.10
This variable represents the index for the vrSnmpCon tables.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	OBJECT IDENTIFIER

vrSnmpConProvTable		1.3.6.1.4.1.562.2.4.1.100.8.6.10
This group contains provisionable attributes relating to SNMPv2 Contexts Table Entries. The attributes are derived from rfc1445, and rfc1447.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpConProvEntry

vrSnmpConProvEntry		1.3.6.1.4.1.562.2.4.1.100.8.6.10.1
An entry in the vrSnmpConProvTable.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VrSnmpConProvEntry

vrSnmpConStdIndex		1.3.6.1.4.1.562.2.4.1.100.8.6.10.1.1
This attribute represents the SNMPv2 Contexts table contextIndex. This index is unique and its value is automatically selected for you.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	1..1024

vrSnmpConLocal		1.3.6.1.4.1.562.2.4.1.100.8.6.10.1.2
This attribute indicates whether this context is realized by this SNMPv2 entity. This is a constant - true.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	true(1)

vrSnmpConViewIndex		1.3.6.1.4.1.562.2.4.1.100.8.6.10.1.3
The SNMPv2 Contexts view index selects a particular MIB view entry in the SNMPv2 viewTable. This index must correspond to the first replication index (index) of one of the entries in the SnmpView. The value of the localTime attribute provides further information on the temporal domain of the MIB view.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32	1..1024

vrSnmpConLocalTime		1.3.6.1.4.1.562.2.4.1.100.8.6.10.1.4
This attribute identifies the temporal context of the management information in the MIB view identified by the viewIndex attribute. This is a constant - currentTime. The SNMPv2 alternatives restartTime and cacheTime are not currently supported.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	currentTime(1)

vrSnmpConRowStorageType		1.3.6.1.4.1.562.2.4.1.100.8.6.10.1.5
The attribute indicates the storage type for this conceptual row in the SNMPv2 contextTable. This is a constant - nonVolatile.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	nonVolatile(3)

vrSnmpConStdRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.6.10.1.6
This attribute indicates the status of this conceptual row in the SNMPv2 aclTable. This is a constant - active.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	active(1)

vrSnmpView		1.3.6.1.4.1.562.2.4.1.100.8.7
OBJECT IDENTIFIER

vrSnmpViewRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.8.7.1
This entry controls the addition and deletion of vrSnmpView components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpViewRowStatusEntry

vrSnmpViewRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.8.7.1.1
A single entry in the table represents a single vrSnmpView component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpViewRowStatusEntry

vrSnmpViewRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.7.1.1.1
This variable is used as the basis for SNMP naming of vrSnmpView components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

vrSnmpViewComponentName		1.3.6.1.4.1.562.2.4.1.100.8.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

vrSnmpViewStorageType		1.3.6.1.4.1.562.2.4.1.100.8.7.1.1.4
This variable represents the storage type value for the vrSnmpView tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

vrSnmpViewIndex		1.3.6.1.4.1.562.2.4.1.100.8.7.1.1.10
This variable represents an index for the vrSnmpView tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Integer32	1..1024

vrSnmpViewSubtreeIndex		1.3.6.1.4.1.562.2.4.1.100.8.7.1.1.11
This variable represents an index for the vrSnmpView tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	OBJECT IDENTIFIER

vrSnmpViewProvTable		1.3.6.1.4.1.562.2.4.1.100.8.7.10
This group contains provisionable attributes relating to SNMPv2 View Table SubTrees. The attributes are derived from rfc1445, and rfc1447.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpViewProvEntry

vrSnmpViewProvEntry		1.3.6.1.4.1.562.2.4.1.100.8.7.10.1
An entry in the vrSnmpViewProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpViewProvEntry

vrSnmpViewMask		1.3.6.1.4.1.562.2.4.1.100.8.7.10.1.1
This attribute is the View mask which, in combination with the corresponding instance of SnmpView subTree, defines a family of view subtrees. Each bit of this bit mask corresponds to a subindentifier of SnmpView subTree, with the most significant bit of the i-th octet of this octet string value (extended if necessary, see below) corresponding to the (8*i - 7)-th sub-identifier, and the least significant bit of the i-th octet of this octet string corresponding to the (8*i)-th sub-identifier, where i is in the range 1 through 16. Each bit of this bit mask specifies whether or not the corresponding sub-identifiers must match when determining if an OBJECT IDENTIFIER is in this family of view subtrees; a '1' indicates that an exact match must occur; a '0' indicates 'wild card', meaning that any sub-identifier value matches. Thus, the OBJECT IDENTIFIER X of an object instance is contained in a family of view subtrees if the following criteria are met: For each sub-identifier of the value of SnmpView subTree, either the i-th bit of mask is 0, or the i-th sub-identifier of X is equal to the i-th sub-identifier of the value of SnmpView subTree. If the value of this bit mask is M bits long and there are more than M sub-identifiers in the corresponding instance of SnmpView subTree, then the bit mask is extended with 1's to be the required length. Note that when the value of this object is the zero-length string, this extension rule results in a mask of all 1's being used (no wild card) and the family of SnmpView subTrees is the one snmpView subTree uniquely identified by the corresponding instance of subTree.
Status: mandatory	Access: read-write
OBJECT-TYPE
	HexString	Size(0..16)

vrSnmpViewType		1.3.6.1.4.1.562.2.4.1.100.8.7.10.1.2
This attribute indicates whether the particular family of view subtrees is included or excluded in the SNMPv2 context's (or SNMPv1 community's) MIB view. The value 'includedSubtree' indicates that the corresponding instances of subTree and mask define a family of view subtrees included in the MIB view. The value 'excludedSubtree' indicates that the corresponding instances of subTree and mask define a family of view subtrees excluded in the MIB view.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	includedSubtree(1), excludedSubtree(2)

vrSnmpViewRowStorageType		1.3.6.1.4.1.562.2.4.1.100.8.7.10.1.3
The attribute indicates the storage type for this conceptual row in the SNMPv2 viewTable. This is a constant - nonVolatile.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	nonVolatile(3)

vrSnmpViewStdRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.7.10.1.4
This attribute indicates the status of this conceptual row in the SNMPv2 snmpViewTable. This is a constant - active.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	active(1)

vrSnmpOr		1.3.6.1.4.1.562.2.4.1.100.8.8
OBJECT IDENTIFIER

vrSnmpOrRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.8.8.1
This entry controls the addition and deletion of vrSnmpOr components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpOrRowStatusEntry

vrSnmpOrRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.8.8.1.1
A single entry in the table represents a single vrSnmpOr component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpOrRowStatusEntry

vrSnmpOrRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.8.1.1.1
This variable is used as the basis for SNMP naming of vrSnmpOr components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

vrSnmpOrComponentName		1.3.6.1.4.1.562.2.4.1.100.8.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

vrSnmpOrStorageType		1.3.6.1.4.1.562.2.4.1.100.8.8.1.1.4
This variable represents the storage type value for the vrSnmpOr tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

vrSnmpOrIndex		1.3.6.1.4.1.562.2.4.1.100.8.8.1.1.10
This variable represents the index for the vrSnmpOr tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Integer32	1..1024

vrSnmpOrOrTable		1.3.6.1.4.1.562.2.4.1.100.8.8.10
The attributes of this group describe a MIB currently supported by the SNMP agent. SNMP managers make use of these entries to determine what is supported. The group is derived from rfc 1450.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpOrOrEntry

vrSnmpOrOrEntry		1.3.6.1.4.1.562.2.4.1.100.8.8.10.1
An entry in the vrSnmpOrOrTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpOrOrEntry

vrSnmpOrId		1.3.6.1.4.1.562.2.4.1.100.8.8.10.1.2
This attribute represents the authoritative identification of a dynamically-configurable management entity object resource. This is a MIB Object Identifier.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

vrSnmpOrDescr		1.3.6.1.4.1.562.2.4.1.100.8.8.10.1.3
This attribute represents the textual description of a dynamically- configurable management entity object resource. This is an ASCII description of a supported MIB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	AsciiString	Size(0..255)

vrSnmpV2Stats		1.3.6.1.4.1.562.2.4.1.100.8.9
OBJECT IDENTIFIER

vrSnmpV2StatsRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.8.9.1
This entry controls the addition and deletion of vrSnmpV2Stats components.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpV2StatsRowStatusEntry

vrSnmpV2StatsRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.8.9.1.1
A single entry in the table represents a single vrSnmpV2Stats component.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VrSnmpV2StatsRowStatusEntry

vrSnmpV2StatsRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.9.1.1.1
This variable is used as the basis for SNMP naming of vrSnmpV2Stats components. These components cannot be added nor deleted.
Status: obsolete	Access: read-only
OBJECT-TYPE
	RowStatus

vrSnmpV2StatsComponentName		1.3.6.1.4.1.562.2.4.1.100.8.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: obsolete	Access: read-only
OBJECT-TYPE
	DisplayString

vrSnmpV2StatsStorageType		1.3.6.1.4.1.562.2.4.1.100.8.9.1.1.4
This variable represents the storage type value for the vrSnmpV2Stats tables.
Status: obsolete	Access: read-only
OBJECT-TYPE
	StorageType

vrSnmpV2StatsIndex		1.3.6.1.4.1.562.2.4.1.100.8.9.1.1.10
This variable represents the index for the vrSnmpV2Stats tables.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	NonReplicated

vrSnmpV2StatsStatsTable		1.3.6.1.4.1.562.2.4.1.100.8.9.10
This attribute group contains the collection of statistics as defined by SNMPv2 providing basic instrumentation of a SNMPv2 Agent. The group is derived from rfc 1450. As the implementation is fully bilingual in regards to Snmp V2/V1, statistics which apply only to unilingual V2 Agents do not appear as attributes. Similarly as privacy protocols are not supported, the relevant statistics have no corresponding attributes.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpV2StatsStatsEntry

vrSnmpV2StatsStatsEntry		1.3.6.1.4.1.562.2.4.1.100.8.9.10.1
An entry in the vrSnmpV2StatsStatsTable.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VrSnmpV2StatsStatsEntry

vrSnmpV2StatsPackets		1.3.6.1.4.1.562.2.4.1.100.8.9.10.1.1
This attribute represents the total number of SNMP messages received by the SNMP management entity from the transport service. This has the same value as inPackets in the SnmpMibIIStatsOp group.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpV2StatsEncodingErrors		1.3.6.1.4.1.562.2.4.1.100.8.9.10.1.2
This attribute represents the total number of SNMP messages received by the SNMP management entity which were improperly BER encoded or had an invalid ASN.1 syntax. This has the same value as inAsnParseErrs in the SnmpMibIIStatsOp group.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpV2StatsUnknownSrcParties		1.3.6.1.4.1.562.2.4.1.100.8.9.10.1.3
This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message source Party was not locally recognized.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpV2StatsBadAuths		1.3.6.1.4.1.562.2.4.1.100.8.9.10.1.4
This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message authentication protocol did not match that of the local source Party.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpV2StatsNotInLifetime		1.3.6.1.4.1.562.2.4.1.100.8.9.10.1.5
This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message source TimeStamp was less than the combination of the local source Party's clock and lifetime.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpV2StatsWrongDigestValues		1.3.6.1.4.1.562.2.4.1.100.8.9.10.1.6
This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message authentication Digest Value was invalid.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpV2StatsUnknownContexts		1.3.6.1.4.1.562.2.4.1.100.8.9.10.1.7
This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message Context was not locally known.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpV2StatsBadOperations		1.3.6.1.4.1.562.2.4.1.100.8.9.10.1.8
This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the PDU type was not allowed in the local Access Privileges Entry.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpV2StatsSilentDrops		1.3.6.1.4.1.562.2.4.1.100.8.9.10.1.9
This attribute represents the total number of SNMPv2 messages received by the SNMP management entity which were silently ignored because an alternate response message was greater than a local constraint or greater than the maximum message size allowed for the source Party. In other words, this attribute counts the number of error responses pdu's which could not be generated due to size constraints.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpV1Stats		1.3.6.1.4.1.562.2.4.1.100.8.10
OBJECT IDENTIFIER

vrSnmpV1StatsRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.8.10.1
This entry controls the addition and deletion of vrSnmpV1Stats components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpV1StatsRowStatusEntry

vrSnmpV1StatsRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.8.10.1.1
A single entry in the table represents a single vrSnmpV1Stats component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpV1StatsRowStatusEntry

vrSnmpV1StatsRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.10.1.1.1
This variable is used as the basis for SNMP naming of vrSnmpV1Stats components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

vrSnmpV1StatsComponentName		1.3.6.1.4.1.562.2.4.1.100.8.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

vrSnmpV1StatsStorageType		1.3.6.1.4.1.562.2.4.1.100.8.10.1.1.4
This variable represents the storage type value for the vrSnmpV1Stats tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

vrSnmpV1StatsIndex		1.3.6.1.4.1.562.2.4.1.100.8.10.1.1.10
This variable represents the index for the vrSnmpV1Stats tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

vrSnmpV1StatsStatsTable		1.3.6.1.4.1.562.2.4.1.100.8.10.10
This attribute group contains the collection of statistics as defined by SNMPv2 providing basic instrumentation of a SNMPv2 Agent which also implements SNMPv1. The group is derived from rfc 1450.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpV1StatsStatsEntry

vrSnmpV1StatsStatsEntry		1.3.6.1.4.1.562.2.4.1.100.8.10.10.1
An entry in the vrSnmpV1StatsStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpV1StatsStatsEntry

vrSnmpV1StatsBadCommunityNames		1.3.6.1.4.1.562.2.4.1.100.8.10.10.1.1
This attribute counts the SNMPv1 messages received by the SNMP management entity which had an unknown SNMPv1 Community string. This has the same value as the attribute inBadCommunityNames under the SnmpMibIIStats component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpV1StatsBadCommunityUses		1.3.6.1.4.1.562.2.4.1.100.8.10.10.1.2
This attribute counts the SNMPv1 messages received by the SNMP management entity which attempted to perform an operation not allowed for the indicated SNMPv1 Community. This has the same value as the attribute inBadCommunityUses under the SnmpMibIIStats component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStats		1.3.6.1.4.1.562.2.4.1.100.8.11
OBJECT IDENTIFIER

vrSnmpMibIIStatsRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.8.11.1
This entry controls the addition and deletion of vrSnmpMibIIStats components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpMibIIStatsRowStatusEntry

vrSnmpMibIIStatsRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.8.11.1.1
A single entry in the table represents a single vrSnmpMibIIStats component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpMibIIStatsRowStatusEntry

vrSnmpMibIIStatsRowStatus		1.3.6.1.4.1.562.2.4.1.100.8.11.1.1.1
This variable is used as the basis for SNMP naming of vrSnmpMibIIStats components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

vrSnmpMibIIStatsComponentName		1.3.6.1.4.1.562.2.4.1.100.8.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

vrSnmpMibIIStatsStorageType		1.3.6.1.4.1.562.2.4.1.100.8.11.1.1.4
This variable represents the storage type value for the vrSnmpMibIIStats tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

vrSnmpMibIIStatsIndex		1.3.6.1.4.1.562.2.4.1.100.8.11.1.1.10
This variable represents the index for the vrSnmpMibIIStats tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

vrSnmpMibIIStatsStatsTable		1.3.6.1.4.1.562.2.4.1.100.8.11.10
This attribute group contains the collection of statistics as defined by MIB II providing basic instrumentation of a SNMP Agent. The group is derived from rfc 1213. Statistics which are only relevant for SNMP Managers do not appear.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrSnmpMibIIStatsStatsEntry

vrSnmpMibIIStatsStatsEntry		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1
An entry in the vrSnmpMibIIStatsStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	VrSnmpMibIIStatsStatsEntry

vrSnmpMibIIStatsInPackets		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.1
This attribute represents the total number of SNMP messages received by the SNMP management entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsInBadCommunityNames		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.2
This attribute counts the SNMPv1 messages received by the SNMP management entity which had an unknown SNMPv1 Community string. This has the same value as the attribute badCommunityNames under the SnmpV1Stats component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsInBadCommunityUses		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.3
This attribute counts the SNMPv1 messages received by the SNMP management entity which attempted to perform an operation not allowed for the indicated SNMPv1 Community. This has the same value as the attribute badCommunityUses under the SnmpV1Stats component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsInAsnParseErrs		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.4
This attribute counts the SNMP messages received by the SNMP management entity which were improperly BER encoded or had an invalid ASN.1 syntax.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsOutPackets		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.5
This attribute counts the SNMP messages transmitted by the SNMP management entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsInBadVersions		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.6
This attribute counts the SNMPv1 messages received by the SNMP management entity with an invalid SNMP version number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsInTotalReqVars		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.7
This attribute counts the MIB objects successfully retrieved by Get, and Get-Next requests.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsInTotalSetVars		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.8
This attribute counts the MIB objects successfully Set by SNMP requests.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsInGetRequests		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.9
This attribute counts the Get requests accepted and processed by the SNMP management entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsInGetNexts		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.10
This attribute counts the Get-Next requests accepted and processed by the SNMP management entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsInSetRequests		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.11
This attribute counts the Set requests accepted and processed by the SNMP management entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsOutTooBigs		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.12
This attribute counts the responses generated by the SNMP management entity with an error-status field of tooBig.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsOutNoSuchNames		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.13
This attribute counts the SNMPv1 responses generated by the SNMP management entity with an error status field of noSuchName.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsOutBadValues		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.14
This attribute counts the SNMPv1 responses generated by the SNMP management entity with an error status field of badValue.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsOutGenErrs		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.15
This attribute counts the SNMP responses generated by the SNMP management entity with an error-status field of genErr.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsOutGetResponses		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.16
This attribute counts the Get responses generated by the SNMP management entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrSnmpMibIIStatsOutTraps		1.3.6.1.4.1.562.2.4.1.100.8.11.10.1.17
This attribute counts the Traps generated by the SNMP management entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

vrInitSnmpConfig		1.3.6.1.4.1.562.2.4.1.100.9
OBJECT IDENTIFIER

vrInitSnmpConfigRowStatusTable		1.3.6.1.4.1.562.2.4.1.100.9.1
This entry controls the addition and deletion of vrInitSnmpConfig components.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrInitSnmpConfigRowStatusEntry

vrInitSnmpConfigRowStatusEntry		1.3.6.1.4.1.562.2.4.1.100.9.1.1
A single entry in the table represents a single vrInitSnmpConfig component.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VrInitSnmpConfigRowStatusEntry

vrInitSnmpConfigRowStatus		1.3.6.1.4.1.562.2.4.1.100.9.1.1.1
This variable is used as the basis for SNMP naming of vrInitSnmpConfig components. These components can be added and deleted.
Status: obsolete	Access: read-write
OBJECT-TYPE
	RowStatus

vrInitSnmpConfigComponentName		1.3.6.1.4.1.562.2.4.1.100.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: obsolete	Access: read-only
OBJECT-TYPE
	DisplayString

vrInitSnmpConfigStorageType		1.3.6.1.4.1.562.2.4.1.100.9.1.1.4
This variable represents the storage type value for the vrInitSnmpConfig tables.
Status: obsolete	Access: read-only
OBJECT-TYPE
	StorageType

vrInitSnmpConfigIndex		1.3.6.1.4.1.562.2.4.1.100.9.1.1.10
This variable represents the index for the vrInitSnmpConfig tables.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	NonReplicated

vrInitSnmpConfigProvTable		1.3.6.1.4.1.562.2.4.1.100.9.10
This group contains provisionable attributes required for the definition of initial SNMPv2 parties, contexts, views, and access control policies, as defined in rfc1447.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VrInitSnmpConfigProvEntry

vrInitSnmpConfigProvEntry		1.3.6.1.4.1.562.2.4.1.100.9.10.1
An entry in the vrInitSnmpConfigProvTable.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VrInitSnmpConfigProvEntry

vrInitSnmpConfigAgentAddress		1.3.6.1.4.1.562.2.4.1.100.9.10.1.1
This attribute is the address of the Virtual Router where the initial Agent parties will receive network management traffic. It is used to initialize the transport address of the initial local parties and also is used to define initial party and context identifiers. The format of the agentAddress is an IpAddress.
Status: obsolete	Access: read-write
OBJECT-TYPE
	AsciiString	Size(1..80)

vrInitSnmpConfigManagerAddress		1.3.6.1.4.1.562.2.4.1.100.9.10.1.2
This attribute is the address of the SNMPv2 manager. It is used to initialize the transport address of the initial non-local parties. The format of the managerAddress is an IpAddress.
Status: obsolete	Access: read-write
OBJECT-TYPE
	AsciiString	Size(1..80)

baseSnmpGroup		1.3.6.1.4.1.562.2.4.2.36.1
OBJECT IDENTIFIER

baseSnmpGroupBD		1.3.6.1.4.1.562.2.4.2.36.1.4
OBJECT IDENTIFIER

baseSnmpGroupBD01		1.3.6.1.4.1.562.2.4.2.36.1.4.2
OBJECT IDENTIFIER

baseSnmpGroupBD01A		1.3.6.1.4.1.562.2.4.2.36.1.4.2.2
OBJECT IDENTIFIER

baseSnmpCapabilities		1.3.6.1.4.1.562.2.4.2.36.3
OBJECT IDENTIFIER

baseSnmpCapabilitiesBD		1.3.6.1.4.1.562.2.4.2.36.3.4
OBJECT IDENTIFIER

baseSnmpCapabilitiesBD01		1.3.6.1.4.1.562.2.4.2.36.3.4.2
OBJECT IDENTIFIER

baseSnmpCapabilitiesBD01A		1.3.6.1.4.1.562.2.4.2.36.3.4.2.2
OBJECT IDENTIFIER