Nortel-Magellan-Passport-FrameRelayEngMIB

File: Nortel-Magellan-Passport-FrameRelayEngMIB.mib (12105 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-LogicalProcessorMIB

Imported symbols

OBJECT-TYPE passportMIBs DisplayString
StorageType RowStatus Gauge32
Unsigned32 NonReplicated lpIndex
lpEngIndex lpEng

Defined Types

LpEngFrsRowStatusEntry  
SEQUENCE    
  lpEngFrsRowStatus RowStatus
  lpEngFrsComponentName DisplayString
  lpEngFrsStorageType StorageType
  lpEngFrsIndex NonReplicated

LpEngFrsOperEntry  
SEQUENCE    
  lpEngFrsMaxCalls Unsigned32
  lpEngFrsHeadroomCalls Unsigned32
  lpEngFrsCurrentCalls Gauge32
  lpEngFrsCallsRefused Unsigned32

LpEngFrsOvRowStatusEntry  
SEQUENCE    
  lpEngFrsOvRowStatus RowStatus
  lpEngFrsOvComponentName DisplayString
  lpEngFrsOvStorageType StorageType
  lpEngFrsOvIndex NonReplicated

LpEngFrsOvProvEntry  
SEQUENCE    
  lpEngFrsOvMaxCalls Unsigned32
  lpEngFrsOvHeadroomCalls Unsigned32

Defined Values

frameRelayEngMIB 1.3.6.1.4.1.562.2.4.2.73
OBJECT IDENTIFIER    

lpEngFrs 1.3.6.1.4.1.562.2.4.1.12.23.3
OBJECT IDENTIFIER    

lpEngFrsRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.23.3.1
This entry controls the addition and deletion of lpEngFrs components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpEngFrsRowStatusEntry

lpEngFrsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.23.3.1.1
A single entry in the table represents a single lpEngFrs component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpEngFrsRowStatusEntry  

lpEngFrsRowStatus 1.3.6.1.4.1.562.2.4.1.12.23.3.1.1.1
This variable is used as the basis for SNMP naming of lpEngFrs components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

lpEngFrsComponentName 1.3.6.1.4.1.562.2.4.1.12.23.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

lpEngFrsStorageType 1.3.6.1.4.1.562.2.4.1.12.23.3.1.1.4
This variable represents the storage type value for the lpEngFrs tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

lpEngFrsIndex 1.3.6.1.4.1.562.2.4.1.12.23.3.1.1.10
This variable represents the index for the lpEngFrs tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

lpEngFrsOperTable 1.3.6.1.4.1.562.2.4.1.12.23.3.10
This group contains the Frame Relay default or current engineering parameters and statistics for this LP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpEngFrsOperEntry

lpEngFrsOperEntry 1.3.6.1.4.1.562.2.4.1.12.23.3.10.1
An entry in the lpEngFrsOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpEngFrsOperEntry  

lpEngFrsMaxCalls 1.3.6.1.4.1.562.2.4.1.12.23.3.10.1.1
This attribute indicates the maximum number of Frame Relay (FR) calls of any type (PVC, SPVC, or SVC) which can be simultaneously 'current' on the LP. Note that 'current' doesn't necessarily mean that the call is in data transfer. It minimally means that such a call can subsequently generate accounting records. When the value of currentCalls reaches the value of maxCalls for FR on this LP, subsequent call attempts are rejected by the FR service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1000000  

lpEngFrsHeadroomCalls 1.3.6.1.4.1.562.2.4.1.12.23.3.10.1.2
This attribute indicates a number which allows a network engineer to do some statistical multiplexing for admitting calls when certain overload conditions are reached. For setting this, refer to the Engineering Guidelines. It depends on conditions such as the expected sustained SVC call setup/clear rates and how conservative one wants to be in certain 'error' conditions where many calls are cleared simultaneously.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1000000  

lpEngFrsCurrentCalls 1.3.6.1.4.1.562.2.4.1.12.23.3.10.1.3
This attribute counts the total number of Frame Relay calls (initially just FrUni and FrNni) which are 'current'. Note that 'current' doesn't necessarily mean that the call is in data transfer. It minimally means that such a call can subsequently generate accounting records.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

lpEngFrsCallsRefused 1.3.6.1.4.1.562.2.4.1.12.23.3.10.1.4
This attribute counts the total number of call connections (including calls from the link as well as calls from the subnet) that have been refused because currentCalls has reached the limits, as specified by the engineering formulas for Frs on this LP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpEngFrsOv 1.3.6.1.4.1.562.2.4.1.12.23.3.2
OBJECT IDENTIFIER    

lpEngFrsOvRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.23.3.2.1
This entry controls the addition and deletion of lpEngFrsOv components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpEngFrsOvRowStatusEntry

lpEngFrsOvRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.23.3.2.1.1
A single entry in the table represents a single lpEngFrsOv component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpEngFrsOvRowStatusEntry  

lpEngFrsOvRowStatus 1.3.6.1.4.1.562.2.4.1.12.23.3.2.1.1.1
This variable is used as the basis for SNMP naming of lpEngFrsOv components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

lpEngFrsOvComponentName 1.3.6.1.4.1.562.2.4.1.12.23.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

lpEngFrsOvStorageType 1.3.6.1.4.1.562.2.4.1.12.23.3.2.1.1.4
This variable represents the storage type value for the lpEngFrsOv tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

lpEngFrsOvIndex 1.3.6.1.4.1.562.2.4.1.12.23.3.2.1.1.10
This variable represents the index for the lpEngFrsOv tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

lpEngFrsOvProvTable 1.3.6.1.4.1.562.2.4.1.12.23.3.2.10
This group contains the Frame Relay provisionable engineering parameters for this LP. DESCRIPTION
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpEngFrsOvProvEntry

lpEngFrsOvProvEntry 1.3.6.1.4.1.562.2.4.1.12.23.3.2.10.1
An entry in the lpEngFrsOvProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpEngFrsOvProvEntry  

lpEngFrsOvMaxCalls 1.3.6.1.4.1.562.2.4.1.12.23.3.2.10.1.1
This attribute specifies the maximum number of Frame Relay calls of any type (PVC, SPVC, or SVC) which can be simultaneously 'current' on this LP. Note that 'current' doesn't necessarily mean that the call is in data transfer. It minimally means that such a call can subsequently generate accounting records. When the value of currentCalls reaches the value of maxCalls for FR on this LP, subsequent call attempts are rejected by the FR services.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1000000  

lpEngFrsOvHeadroomCalls 1.3.6.1.4.1.562.2.4.1.12.23.3.2.10.1.2
This attribute specifies a number which allows a network engineer to do some statistical multiplexing for admitting calls when certain overload conditions are reached. For setting this, refer to the Engineering Guidelines. It depends on conditions such as the expected sustained SVC call setup/clear rates and how conservative one wants to be in certain 'error' conditions where many calls are cleared simultaneously.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1000000  

frameRelayEngGroup 1.3.6.1.4.1.562.2.4.2.73.1
OBJECT IDENTIFIER    

frameRelayEngGroupBE 1.3.6.1.4.1.562.2.4.2.73.1.5
OBJECT IDENTIFIER    

frameRelayEngGroupBE00 1.3.6.1.4.1.562.2.4.2.73.1.5.1
OBJECT IDENTIFIER    

frameRelayEngGroupBE00A 1.3.6.1.4.1.562.2.4.2.73.1.5.1.2
OBJECT IDENTIFIER    

frameRelayEngCapabilities 1.3.6.1.4.1.562.2.4.2.73.3
OBJECT IDENTIFIER    

frameRelayEngCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.73.3.5
OBJECT IDENTIFIER    

frameRelayEngCapabilitiesBE00 1.3.6.1.4.1.562.2.4.2.73.3.5.1
OBJECT IDENTIFIER    

frameRelayEngCapabilitiesBE00A 1.3.6.1.4.1.562.2.4.2.73.3.5.1.2
OBJECT IDENTIFIER