Nortel-Magellan-Passport-GsmIwfMIB

File: Nortel-Magellan-Passport-GsmIwfMIB.mib (202587 bytes)

Imported modules

RFC-1212	RFC1155-SMI	Nortel-Magellan-Passport-UsefulDefinitionsMIB
Nortel-Magellan-Passport-StandardTextualConventionsMIB	Nortel-Magellan-Passport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE	IpAddress	components
passportMIBs	Counter32	RowPointer
DisplayString	StorageType	RowStatus
Gauge32	Integer32	Unsigned32
AsciiString	NonReplicated	Link
FixedPoint2

Defined Types

GsmCsRowStatusEntry
SEQUENCE
	gsmCsRowStatus	RowStatus
	gsmCsComponentName	DisplayString
	gsmCsStorageType	StorageType
	gsmCsTrunkGrpIndex	Integer32

GsmCsProvEntry
SEQUENCE
	gsmCsCommentText	AsciiString
	gsmCsMscIpAddress	IpAddress
	gsmCsVirtualRouterName	RowPointer
	gsmCsVoiceLaw	INTEGER

GsmCsCidDataEntry
SEQUENCE
	gsmCsCustomerIdentifier	Unsigned32

GsmCsStateEntry
SEQUENCE
	gsmCsAdminState	INTEGER
	gsmCsOperationalState	INTEGER
	gsmCsUsageState	INTEGER

GsmCsStatsEntry
SEQUENCE
	gsmCsCurrentCalls	Gauge32
	gsmCsCallsRequested	Counter32
	gsmCsCallsSetup	Counter32
	gsmCsCallsActivated	Counter32
	gsmCsCallsReleasedNormal	Counter32
	gsmCsCallsReleasedAbnormal	Counter32
	gsmCsChannelConfigChanges	Counter32
	gsmCsChannelModeModifyRequests	Counter32
	gsmCsStatusMessagesRx	Counter32
	gsmCsErroredMipFrames	Counter32

GsmCsModemRowStatusEntry
SEQUENCE
	gsmCsModemRowStatus	RowStatus
	gsmCsModemComponentName	DisplayString
	gsmCsModemStorageType	StorageType
	gsmCsModemIndex	INTEGER

GsmCsRlpRowStatusEntry
SEQUENCE
	gsmCsRlpRowStatus	RowStatus
	gsmCsRlpComponentName	DisplayString
	gsmCsRlpStorageType	StorageType
	gsmCsRlpIndex	INTEGER

GsmCsRlpProvEntry
SEQUENCE
	gsmCsRlpHighestVersion	Unsigned32
	gsmCsRlpIwfToMsWindowSize	Unsigned32
	gsmCsRlpMsToIwfWindowSize	Unsigned32
	gsmCsRlpT1AckTimer	Unsigned32
	gsmCsRlpT2AckDelayTimer	Unsigned32
	gsmCsRlpN2RetransmitCount	Unsigned32

GsmCsFaxRowStatusEntry
SEQUENCE
	gsmCsFaxRowStatus	RowStatus
	gsmCsFaxComponentName	DisplayString
	gsmCsFaxStorageType	StorageType
	gsmCsFaxIndex	NonReplicated

GsmCsFaxProvEntry
SEQUENCE
	gsmCsFaxT1CalledToneTimer	FixedPoint2

GsmCsV42RowStatusEntry
SEQUENCE
	gsmCsV42RowStatus	RowStatus
	gsmCsV42ComponentName	DisplayString
	gsmCsV42StorageType	StorageType
	gsmCsV42Index	NonReplicated

GsmCsV42ProvEntry
SEQUENCE
	gsmCsV42T400DetectTimer	FixedPoint2
	gsmCsV42T401AckTimer	FixedPoint2
	gsmCsV42T402AckDelayTimer	FixedPoint2
	gsmCsV42T403IdleProbeTimer	Unsigned32
	gsmCsV42TxN401FrameSize	Unsigned32
	gsmCsV42RxN401FrameSize	Unsigned32
	gsmCsV42TxKwindowSize	Unsigned32
	gsmCsV42RxKwindowSize	Unsigned32
	gsmCsV42N400RetransLimit	Unsigned32

GsmCsV42bisRowStatusEntry
SEQUENCE
	gsmCsV42bisRowStatus	RowStatus
	gsmCsV42bisComponentName	DisplayString
	gsmCsV42bisStorageType	StorageType
	gsmCsV42bisIndex	NonReplicated

GsmCsV42bisProvEntry
SEQUENCE
	gsmCsV42bisCompressionDirection	INTEGER
	gsmCsV42bisMaximumCodewords	Unsigned32
	gsmCsV42bisMaximumStringSize	Unsigned32
	gsmCsV42bisActionOnError	INTEGER

GsmCsLpRowStatusEntry
SEQUENCE
	gsmCsLpRowStatus	RowStatus
	gsmCsLpComponentName	DisplayString
	gsmCsLpStorageType	StorageType
	gsmCsLpIndex	Integer32

GsmCsLpOperEntry
SEQUENCE
	gsmCsLpConfiguredBearerChannels	Unsigned32
	gsmCsLpActiveCalls	Gauge32
	gsmCsLpAssignedCapacity	Unsigned32
	gsmCsLpModemsSupported	INTEGER

GsmBcRowStatusEntry
SEQUENCE
	gsmBcRowStatus	RowStatus
	gsmBcComponentName	DisplayString
	gsmBcStorageType	StorageType
	gsmBcTrunkGrpIndex	Integer32
	gsmBcCicIndex	Integer32

GsmBcOperEntry
SEQUENCE
	gsmBcMipState	INTEGER
	gsmBcMaxUserDataRate	INTEGER
	gsmBcConnectionType	INTEGER
	gsmBcDataBits	INTEGER
	gsmBcStopBits	INTEGER
	gsmBcParity	INTEGER
	gsmBcFlowControl	INTEGER
	gsmBcCallType	INTEGER
	gsmBcLastResponseCode	INTEGER
	gsmBcMateBearerChannel	RowPointer

GsmBcCidDataEntry
SEQUENCE
	gsmBcCustomerIdentifier	Unsigned32

GsmBcStateEntry
SEQUENCE
	gsmBcAdminState	INTEGER
	gsmBcOperationalState	INTEGER
	gsmBcUsageState	INTEGER

GsmBcFramerRowStatusEntry
SEQUENCE
	gsmBcFramerRowStatus	RowStatus
	gsmBcFramerComponentName	DisplayString
	gsmBcFramerStorageType	StorageType
	gsmBcFramerIndex	NonReplicated

GsmBcFramerProvEntry
SEQUENCE
	gsmBcFramerInterfaceName	Link

GsmBcFramerStatsEntry
SEQUENCE
	gsmBcFramerFrmToIf	Counter32
	gsmBcFramerFrmFromIf	Counter32
	gsmBcFramerOctetFromIf	Counter32
	gsmBcFramerCrcErrors	Counter32
	gsmBcFramerLrcErrors	Counter32
	gsmBcFramerNonOctetErrors	Counter32
	gsmBcFramerOverruns	Counter32
	gsmBcFramerUnderruns	Counter32

GsmBcFramerLinkEntry
SEQUENCE
	gsmBcFramerFramingType	INTEGER

GsmBcFramerStateEntry
SEQUENCE
	gsmBcFramerAdminState	INTEGER
	gsmBcFramerOperationalState	INTEGER
	gsmBcFramerUsageState	INTEGER

GsmBcLayer1RowStatusEntry
SEQUENCE
	gsmBcLayer1RowStatus	RowStatus
	gsmBcLayer1ComponentName	DisplayString
	gsmBcLayer1StorageType	StorageType
	gsmBcLayer1Index	NonReplicated

GsmBcLayer1OperEntry
SEQUENCE
	gsmBcLayer1ActiveMode	INTEGER
	gsmBcLayer1Connection	INTEGER
	gsmBcLayer1DataRate	Unsigned32
	gsmBcLayer1IntermediateRate	Unsigned32

GsmBcLayer1StatsEntry
SEQUENCE
	gsmBcLayer1FramesTx	Counter32
	gsmBcLayer1FramesRx	Counter32
	gsmBcLayer1BytesTx	Counter32
	gsmBcLayer1BytesRx	Counter32
	gsmBcLayer1UnderRunsTx	Counter32
	gsmBcLayer1OverRunsRx	Counter32
	gsmBcLayer1NonOctetErrorsRx	Counter32
	gsmBcLayer1LargeFrameErrorsRx	Counter32
	gsmBcLayer1FramesDiscarded	Counter32
	gsmBcLayer1LrcErrorsTx	Counter32

GsmBcModemRowStatusEntry
SEQUENCE
	gsmBcModemRowStatus	RowStatus
	gsmBcModemComponentName	DisplayString
	gsmBcModemStorageType	StorageType
	gsmBcModemIndex	NonReplicated

GsmBcModemOperEntry
SEQUENCE
	gsmBcModemRate	INTEGER
	gsmBcModemAlgorithmInUse	OCTET STRING
	gsmBcModemProtocolState	INTEGER
	gsmBcModemReceiverTransmitter	INTEGER
	gsmBcModemTraining	INTEGER
	gsmBcModemToUpperFlowControlActive	INTEGER
	gsmBcModemToDspFlowControlActive	INTEGER
	gsmBcModemAsyncMode	INTEGER
	gsmBcModemAutoHdlcMode	INTEGER
	gsmBcModemOutbandFlowControl	INTEGER
	gsmBcModemOutbandBreak	INTEGER
	gsmBcModemAutobaud	INTEGER

GsmBcModemStatsEntry
SEQUENCE
	gsmBcModemBytesTx	Counter32
	gsmBcModemBytesRx	Counter32
	gsmBcModemFramingErrors	Counter32

GsmBcV110RowStatusEntry
SEQUENCE
	gsmBcV110RowStatus	RowStatus
	gsmBcV110ComponentName	DisplayString
	gsmBcV110StorageType	StorageType
	gsmBcV110Index	NonReplicated

GsmBcV110OperEntry
SEQUENCE
	gsmBcV110DataRate	Unsigned32
	gsmBcV110IntermediateRate	INTEGER

GsmBcV110StatsEntry
SEQUENCE
	gsmBcV110FramesTx	Counter32
	gsmBcV110FramesRx	Counter32
	gsmBcV110BytesTx	Counter32
	gsmBcV110BytesRx	Counter32
	gsmBcV110UnderRunsTx	Counter32
	gsmBcV110OverRunsRx	Counter32
	gsmBcV110NonOctetErrorsRx	Counter32
	gsmBcV110LargeFrameErrorsRx	Counter32
	gsmBcV110FramesDiscarded	Counter32
	gsmBcV110LrcErrorsTx	Counter32

GsmBcFaxRowStatusEntry
SEQUENCE
	gsmBcFaxRowStatus	RowStatus
	gsmBcFaxComponentName	DisplayString
	gsmBcFaxStorageType	StorageType
	gsmBcFaxIndex	NonReplicated

GsmBcFaxOperEntry
SEQUENCE
	gsmBcFaxActiveMode	INTEGER
	gsmBcFaxProtocolState	INTEGER
	gsmBcFaxMessageRate	Unsigned32

GsmBcFaxStatsEntry
SEQUENCE
	gsmBcFaxMessageFramesRx	Counter32
	gsmBcFaxMessageFramesTx	Counter32
	gsmBcFaxBcsFramesRx	Counter32
	gsmBcFaxBcsFramesTx	Counter32
	gsmBcFaxPagesRxFromMobile	Counter32
	gsmBcFaxPagesTxToMobile	Counter32
	gsmBcFaxChannelModeModify	Counter32
	gsmBcFaxBcsFrameErrors	Counter32

GsmBcRlpRowStatusEntry
SEQUENCE
	gsmBcRlpRowStatus	RowStatus
	gsmBcRlpComponentName	DisplayString
	gsmBcRlpStorageType	StorageType
	gsmBcRlpIndex	NonReplicated

GsmBcRlpOperEntry
SEQUENCE
	gsmBcRlpProtocolState	INTEGER
	gsmBcRlpFrameSize	Unsigned32
	gsmBcRlpHighestVersion	Unsigned32
	gsmBcRlpIwfToMsWindowSize	Unsigned32
	gsmBcRlpMsToIwfWindowSize	Unsigned32
	gsmBcRlpT1AckTimer	Unsigned32
	gsmBcRlpT2AckDelayTimer	Unsigned32
	gsmBcRlpN2RetransmitCount	Unsigned32

GsmBcRlpStatsEntry
SEQUENCE
	gsmBcRlpIFramesTx	Counter32
	gsmBcRlpIFramesRx	Counter32
	gsmBcRlpFramesRetransmitted	Counter32
	gsmBcRlpT1AckTimeouts	Counter32
	gsmBcRlpInvalidFrames	Counter32
	gsmBcRlpCrcErrorsRx	Counter32
	gsmBcRlpOutOfSequenceFrames	Counter32
	gsmBcRlpRemoteBusyIndications	Counter32
	gsmBcRlpLocalBusyIndications	Counter32
	gsmBcRlpIFramesTxDiscarded	Counter32
	gsmBcRlpResetsRx	Counter32

GsmBcV42RowStatusEntry
SEQUENCE
	gsmBcV42RowStatus	RowStatus
	gsmBcV42ComponentName	DisplayString
	gsmBcV42StorageType	StorageType
	gsmBcV42Index	NonReplicated

GsmBcV42OperEntry
SEQUENCE
	gsmBcV42ProtocolState	INTEGER
	gsmBcV42TxN401FrameSize	Unsigned32
	gsmBcV42RxN401FrameSize	Unsigned32
	gsmBcV42TxKwindowSize	Unsigned32
	gsmBcV42RxKwindowSize	Unsigned32

GsmBcV42StatsEntry
SEQUENCE
	gsmBcV42IBytesRx	Counter32
	gsmBcV42IBytesTx	Counter32
	gsmBcV42IFramesRx	Counter32
	gsmBcV42IFramesTx	Counter32
	gsmBcV42FramesRetransmitted	Counter32
	gsmBcV42T1AckTimeouts	Counter32
	gsmBcV42RemoteBusyIndications	Counter32
	gsmBcV42LocalBusyIndications	Counter32
	gsmBcV42BadFramesRx	Counter32
	gsmBcV42CrcErrorsRx	Counter32

GsmBcV42bisRowStatusEntry
SEQUENCE
	gsmBcV42bisRowStatus	RowStatus
	gsmBcV42bisComponentName	DisplayString
	gsmBcV42bisStorageType	StorageType
	gsmBcV42bisIndex	NonReplicated

GsmBcV42bisOperEntry
SEQUENCE
	gsmBcV42bisProtocolModeEncoder	INTEGER
	gsmBcV42bisProtocolModeDecoder	INTEGER
	gsmBcV42bisCompressionDirection	INTEGER
	gsmBcV42bisMaximumCodewords	Unsigned32
	gsmBcV42bisMaximumStringSize	Unsigned32
	gsmBcV42bisLastDecodeError	INTEGER
	gsmBcV42bisCompRatioEncoder	FixedPoint2
	gsmBcV42bisCompRatioDecoder	FixedPoint2

GsmBcV42bisStatsEntry
SEQUENCE
	gsmBcV42bisModeChangesEncode	Counter32
	gsmBcV42bisModeChangesDecode	Counter32
	gsmBcV42bisResetsEncode	Counter32
	gsmBcV42bisResetsDecode	Counter32
	gsmBcV42bisReInitializations	Counter32
	gsmBcV42bisErrorsInDecode	Counter32

GsmBcL2RCopRowStatusEntry
SEQUENCE
	gsmBcL2RCopRowStatus	RowStatus
	gsmBcL2RCopComponentName	DisplayString
	gsmBcL2RCopStorageType	StorageType
	gsmBcL2RCopIndex	NonReplicated

GsmBcL2RCopOperEntry
SEQUENCE
	gsmBcL2RCopFlowControlStateTx	INTEGER
	gsmBcL2RCopFlowControlStateRx	INTEGER

GsmBcL2RCopStatsEntry
SEQUENCE
	gsmBcL2RCopBytesTx	Counter32
	gsmBcL2RCopBytesRx	Counter32
	gsmBcL2RCopBreakCountRx	Counter32
	gsmBcL2RCopBreakCountTx	Counter32

GsmBcUpperRelayRowStatusEntry
SEQUENCE
	gsmBcUpperRelayRowStatus	RowStatus
	gsmBcUpperRelayComponentName	DisplayString
	gsmBcUpperRelayStorageType	StorageType
	gsmBcUpperRelayIndex	NonReplicated

GsmBcUpperRelayOperEntry
SEQUENCE
	gsmBcUpperRelayBufferSize	Unsigned32
	gsmBcUpperRelayFlowControlStateTx	INTEGER
	gsmBcUpperRelayFlowControlStateRx	INTEGER

GsmBcUpperRelayStatsEntry
SEQUENCE
	gsmBcUpperRelayFramesTx	Counter32
	gsmBcUpperRelayFramesRx	Counter32
	gsmBcUpperRelayUnacknowledgedFrames	Gauge32

Defined Values

gsmIwfMIB		1.3.6.1.4.1.562.2.4.2.129
OBJECT IDENTIFIER

gsmCs		1.3.6.1.4.1.562.2.4.1.127
OBJECT IDENTIFIER

gsmCsRowStatusTable		1.3.6.1.4.1.562.2.4.1.127.1
This entry controls the addition and deletion of gsmCs components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsRowStatusEntry

gsmCsRowStatusEntry		1.3.6.1.4.1.562.2.4.1.127.1.1
A single entry in the table represents a single gsmCs component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsRowStatusEntry

gsmCsRowStatus		1.3.6.1.4.1.562.2.4.1.127.1.1.1
This variable is used as the basis for SNMP naming of gsmCs components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

gsmCsComponentName		1.3.6.1.4.1.562.2.4.1.127.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmCsStorageType		1.3.6.1.4.1.562.2.4.1.127.1.1.4
This variable represents the storage type value for the gsmCs tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmCsTrunkGrpIndex		1.3.6.1.4.1.562.2.4.1.127.1.1.10
This variable represents the index for the gsmCs tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Integer32	1..8191

gsmCsProvTable		1.3.6.1.4.1.562.2.4.1.127.100
This group contains general provisioning data for the GsmIwfCallServer that does not fit within other provisioning groups.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsProvEntry

gsmCsProvEntry		1.3.6.1.4.1.562.2.4.1.127.100.1
An entry in the gsmCsProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsProvEntry

gsmCsCommentText		1.3.6.1.4.1.562.2.4.1.127.100.1.1
Use of this attribute is at the discretion of the system administrator. Typically, this attribute specifies the name of the trunk group at the Mobile Services-switching Center (MSC) configured for this GsmIwfCallServer plus any other commentary information.
Status: mandatory	Access: read-write
OBJECT-TYPE
	AsciiString	Size(0..40)

gsmCsMscIpAddress		1.3.6.1.4.1.562.2.4.1.127.100.1.2
This attribute specifies the Internetwork Protocol (IP) Address of the Mobile Services-switching Center (MSC) Control Module (CM) that is permitted to set up GSM InterWorking Function (IWF) calls using this GsmIwfCallServer. This address must be specified in order for this GsmIwfCallServer to provide service. If call setups are attempted from an MSC which does not have this address, those calls are rejected. The callsRequested statistic of this GsmIwfCallServer is incremented, but the callsSetup statistic of this GsmIwfCallServer is not, when call setup attempts are rejected. Also, at the MSC, appropriate call failure logs are generated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

gsmCsVirtualRouterName		1.3.6.1.4.1.562.2.4.1.127.100.1.4
This attribute specifies the VirtualRouter that this GsmIwfCallServer uses to transmit signaling messages to and receive signaling messages from the Mobile Services-switching Center (MSC) that utilizes this GsmIwfCallServer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowPointer

gsmCsVoiceLaw		1.3.6.1.4.1.562.2.4.1.127.100.1.5
This attribute specifies the voice law to be established for the IWF to Public Switched Telephone Network (PSTN) modem link for calls established by this GsmIwfCallServer. Valid values are: aLaw, a protocol for encoding voice-band audio, Pulse Code Modulation (PCM). muLaw, a protocol for encoding voice-band audio, PCM. Note that this value must match the voice law used at the Mobile Services-switching Center (MSC) connected to this GsmIwfCallServer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	aLaw(0), muLaw(1)

gsmCsCidDataTable		1.3.6.1.4.1.562.2.4.1.127.103
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsCidDataEntry

gsmCsCidDataEntry		1.3.6.1.4.1.562.2.4.1.127.103.1
An entry in the gsmCsCidDataTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsCidDataEntry

gsmCsCustomerIdentifier		1.3.6.1.4.1.562.2.4.1.127.103.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0 | 1..8191

gsmCsStateTable		1.3.6.1.4.1.562.2.4.1.127.104
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsStateEntry

gsmCsStateEntry		1.3.6.1.4.1.562.2.4.1.127.104.1
An entry in the gsmCsStateTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsStateEntry

gsmCsAdminState		1.3.6.1.4.1.562.2.4.1.127.104.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	locked(0), unlocked(1), shuttingDown(2)

gsmCsOperationalState		1.3.6.1.4.1.562.2.4.1.127.104.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

gsmCsUsageState		1.3.6.1.4.1.562.2.4.1.127.104.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(0), active(1), busy(2)

gsmCsStatsTable		1.3.6.1.4.1.562.2.4.1.127.121
This group contains operational attributes that measure the performance of this particular GsmIwfCallServer.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsStatsEntry

gsmCsStatsEntry		1.3.6.1.4.1.562.2.4.1.127.121.1
An entry in the gsmCsStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsStatsEntry

gsmCsCurrentCalls		1.3.6.1.4.1.562.2.4.1.127.121.1.1
This attribute indicates the number of active calls currently serviced by this particular GsmIwfCallServer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32	0..2047

gsmCsCallsRequested		1.3.6.1.4.1.562.2.4.1.127.121.1.2
This attribute counts the number of IWF call setup requests received at this particular GsmIwfCallServer from the Mobile Services- switching Center (MSC). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmCsCallsSetup		1.3.6.1.4.1.562.2.4.1.127.121.1.3
This attribute counts the number of IWF calls successfully setup by this particular GsmIwfCallServer. A call is considered setup when the IWF-Setup-Request message is received, indicating a request for a data communications service, and the IWF has successfully allocated the necessary resources to fulfill the request. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmCsCallsActivated		1.3.6.1.4.1.562.2.4.1.127.121.1.4
This attribute counts the number of IWF calls successfully activated by this particular GsmIwfCallServer. A call is considered activated when the IWF receives an IWF-Activate-Request, indicating that the call parties are connected and that data communications must begin. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmCsCallsReleasedNormal		1.3.6.1.4.1.562.2.4.1.127.121.1.5
This attribute counts the number of IWF calls that have completed successfully on this particular GsmIwfCallServer. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmCsCallsReleasedAbnormal		1.3.6.1.4.1.562.2.4.1.127.121.1.6
This attribute counts the number of IWF calls that have been released due to error conditions at this particular GsmIwfCallServer or one if its GsmIwfBearerChannels. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmCsChannelConfigChanges		1.3.6.1.4.1.562.2.4.1.127.121.1.7
This attribute counts the number of channel configuration requests from the Mobile-services Switching Center (MSC) that have been received at this GsmIwfCallServer and have resulted in successful responses. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmCsChannelModeModifyRequests		1.3.6.1.4.1.562.2.4.1.127.121.1.8
This attribute counts the number of channel mode modify requests that have been generated by fax calls serviced by this particular GsmIwfCallServer. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmCsStatusMessagesRx		1.3.6.1.4.1.562.2.4.1.127.121.1.9
This attribute counts the number of status messages received from the Mobile Services-switching Center (MSC). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmCsErroredMipFrames		1.3.6.1.4.1.562.2.4.1.127.121.1.10
This attribute counts the number of MSC/IWF Interface Protocol (MIP) messages received from the Mobile Services-switching Center (MSC) that were in error. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmCsModem		1.3.6.1.4.1.562.2.4.1.127.2
OBJECT IDENTIFIER

gsmCsModemRowStatusTable		1.3.6.1.4.1.562.2.4.1.127.2.1
This entry controls the addition and deletion of gsmCsModem components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsModemRowStatusEntry

gsmCsModemRowStatusEntry		1.3.6.1.4.1.562.2.4.1.127.2.1.1
A single entry in the table represents a single gsmCsModem component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsModemRowStatusEntry

gsmCsModemRowStatus		1.3.6.1.4.1.562.2.4.1.127.2.1.1.1
This variable is used as the basis for SNMP naming of gsmCsModem components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmCsModemComponentName		1.3.6.1.4.1.562.2.4.1.127.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmCsModemStorageType		1.3.6.1.4.1.562.2.4.1.127.2.1.1.4
This variable represents the storage type value for the gsmCsModem tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmCsModemIndex		1.3.6.1.4.1.562.2.4.1.127.2.1.1.10
This variable represents the index for the gsmCsModem tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	v17(0), v21(1), v22(2), v22bis(3), v23(4), v27ter(6), v29(7), v32(8), v32bis(9)

gsmCsRlp		1.3.6.1.4.1.562.2.4.1.127.3
OBJECT IDENTIFIER

gsmCsRlpRowStatusTable		1.3.6.1.4.1.562.2.4.1.127.3.1
This entry controls the addition and deletion of gsmCsRlp components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsRlpRowStatusEntry

gsmCsRlpRowStatusEntry		1.3.6.1.4.1.562.2.4.1.127.3.1.1
A single entry in the table represents a single gsmCsRlp component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsRlpRowStatusEntry

gsmCsRlpRowStatus		1.3.6.1.4.1.562.2.4.1.127.3.1.1.1
This variable is used as the basis for SNMP naming of gsmCsRlp components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmCsRlpComponentName		1.3.6.1.4.1.562.2.4.1.127.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmCsRlpStorageType		1.3.6.1.4.1.562.2.4.1.127.3.1.1.4
This variable represents the storage type value for the gsmCsRlp tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmCsRlpIndex		1.3.6.1.4.1.562.2.4.1.127.3.1.1.10
This variable represents the index for the gsmCsRlp tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	half6kRate(0), full6kRate(1), full12kRate(2), full14k5Rate(3)

gsmCsRlpProvTable		1.3.6.1.4.1.562.2.4.1.127.3.10
This group contains provisionable attributes for the Radio Link Protocol (RLP) parameters used for the call set up by this particular GsmIwfCallServer. Changes to these attributes do not effect existing calls.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsRlpProvEntry

gsmCsRlpProvEntry		1.3.6.1.4.1.562.2.4.1.127.3.10.1
An entry in the gsmCsRlpProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsRlpProvEntry

gsmCsRlpHighestVersion		1.3.6.1.4.1.562.2.4.1.127.3.10.1.1
This attribute specifies the highest version of the Radio Link Protocol (RLP) protocol supported on this GsmIwfCallServer. Valid values are: 0, Single-link basic version. 1, Single-link extended version (for example, extended by data compression). During the Exchange Information (XID) negotiation at the start of the call, both RLP entities (mobile station and IWF) can agree to use a particular RLP version. The IWF attempts to negotiate the value specified by this attribute. Note that if V.42bis data compression is be established between the mobile station and IWF, both entities must agree to use version 1 (or higher). The default value for highestVersion is 1 to enable support for V.42bis data compression. The negotiated value can be viewed in the component GsmIwfRlpOp attribute highestVersion. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..1

gsmCsRlpIwfToMsWindowSize		1.3.6.1.4.1.562.2.4.1.127.3.10.1.2
This attribute specifies the maximum number of sequentially numbered Information (I) frames that may be outstanding (that is, unacknowledged) at any given time from the IWF to the mobile station. GSM specification 4.22 defines the range as 0 to 61. During the Exchange Information (XID) negotiation, both Radio Link Protocol (RLP) entities (mobile station and IWF) can agree to use a specific window size. The IWF attempts to negotiate to the value specified by this attribute. The negotiated value can be viewed in the component GsmIwfRlpOp attribute iwfToMsWindowSize. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..61

gsmCsRlpMsToIwfWindowSize		1.3.6.1.4.1.562.2.4.1.127.3.10.1.3
This attribute specifies the maximum number of sequentially numbered Information (I) frames that may be outstanding (that is, unacknowledged) at any given time from the mobile station to IWF. GSM specification 4.22 defines the range as 0-61. During the Exchange Information (XID) negotiation, both Radio Link Protocol (RLP) entities (mobile station and IWF) can agree to use a specific window size. The IWF attempts to negotiate to the value specified by this attribute. The negotiated value can be viewed in the component GsmIwfRlpOp attribute msToIwfWindowSize. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..61

gsmCsRlpT1AckTimer		1.3.6.1.4.1.562.2.4.1.127.3.10.1.4
This attribute specifies the time in milliseconds within which an acknowledgment of a sent frame must be received. Once this timer expires, the transmitting Radio Link Protocol (RLP) entity shall assume that the frame was lost. During the Exchange Information (XID) negotiation, both RLP entities (mobile station and IWF) can agree to use specific value for this timer (T1). The IWF attempts to negotiate to the value specified by this attribute. The default value for t1AckTimer is 520 msec for the full14k5Rate instance of this component, 480 msec for full12kRate, 540 msec for full6kRate, and 780 msec for half6kRate. The negotiated value can be viewed in the component GsmIwfRlpOp attribute t1AckTimer. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	380..1020

gsmCsRlpT2AckDelayTimer		1.3.6.1.4.1.562.2.4.1.127.3.10.1.5
This attribute specifies the maximum time in milliseconds the receiving Radio Link Protocol (RLP) entity shall wait before sending an acknowledgment for a received information frame. During the Exchange Information (XID) negotiation, both RLP entities (mobile station and IWF) can agree to use specific value for this timer (T2). The IWF attempts to negotiate to the value specified by this attribute. The negotiated value can be viewed in the component GsmIwfRlpOp attribute t2AckDelayTimer. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	10..79

gsmCsRlpN2RetransmitCount		1.3.6.1.4.1.562.2.4.1.127.3.10.1.6
This attribute specifies the maximum number of times a Radio Link Protocol (RLP) entity shall retransmit an individual frame following the expiry of timer T1. During the Exchange Information (XID) negotiation, both RLP entities (mobile station and InterWorking Function (IWF)) can agree to use specific value for N2 (Retransmit Count). The IWF attempts to negotiate to the value specified by this attribute. The negotiated value can be viewed in the component GsmIwfRlpOp attribute n2RetransmitCount. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	1..255

gsmCsFax		1.3.6.1.4.1.562.2.4.1.127.4
OBJECT IDENTIFIER

gsmCsFaxRowStatusTable		1.3.6.1.4.1.562.2.4.1.127.4.1
This entry controls the addition and deletion of gsmCsFax components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsFaxRowStatusEntry

gsmCsFaxRowStatusEntry		1.3.6.1.4.1.562.2.4.1.127.4.1.1
A single entry in the table represents a single gsmCsFax component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsFaxRowStatusEntry

gsmCsFaxRowStatus		1.3.6.1.4.1.562.2.4.1.127.4.1.1.1
This variable is used as the basis for SNMP naming of gsmCsFax components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmCsFaxComponentName		1.3.6.1.4.1.562.2.4.1.127.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmCsFaxStorageType		1.3.6.1.4.1.562.2.4.1.127.4.1.1.4
This variable represents the storage type value for the gsmCsFax tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmCsFaxIndex		1.3.6.1.4.1.562.2.4.1.127.4.1.1.10
This variable represents the index for the gsmCsFax tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmCsFaxProvTable		1.3.6.1.4.1.562.2.4.1.127.4.10
This group contains the provisionable attributes for the fascimile protocol (T.30 and GSM 03.45) for this particular GsmIwfCallServer. Changes to these attributes do not effect existing calls.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsFaxProvEntry

gsmCsFaxProvEntry		1.3.6.1.4.1.562.2.4.1.127.4.10.1
An entry in the gsmCsFaxProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsFaxProvEntry

gsmCsFaxT1CalledToneTimer		1.3.6.1.4.1.562.2.4.1.127.4.10.1.1
This attribute specifies the delay to generate a Called (CED) tone at the IWF after the called station is connected to the line for mobile terminated calls. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	FixedPoint2	150..300

gsmCsV42		1.3.6.1.4.1.562.2.4.1.127.5
OBJECT IDENTIFIER

gsmCsV42RowStatusTable		1.3.6.1.4.1.562.2.4.1.127.5.1
This entry controls the addition and deletion of gsmCsV42 components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsV42RowStatusEntry

gsmCsV42RowStatusEntry		1.3.6.1.4.1.562.2.4.1.127.5.1.1
A single entry in the table represents a single gsmCsV42 component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsV42RowStatusEntry

gsmCsV42RowStatus		1.3.6.1.4.1.562.2.4.1.127.5.1.1.1
This variable is used as the basis for SNMP naming of gsmCsV42 components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmCsV42ComponentName		1.3.6.1.4.1.562.2.4.1.127.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmCsV42StorageType		1.3.6.1.4.1.562.2.4.1.127.5.1.1.4
This variable represents the storage type value for the gsmCsV42 tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmCsV42Index		1.3.6.1.4.1.562.2.4.1.127.5.1.1.10
This variable represents the index for the gsmCsV42 tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmCsV42ProvTable		1.3.6.1.4.1.562.2.4.1.127.5.10
This group contains the provisionable attributes for the V.42 protocol for this particular GsmIwfCallServer. Changes to these attributes do not effect existing calls.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsV42ProvEntry

gsmCsV42ProvEntry		1.3.6.1.4.1.562.2.4.1.127.5.10.1
An entry in the gsmCsV42ProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsV42ProvEntry

gsmCsV42T400DetectTimer		1.3.6.1.4.1.562.2.4.1.127.5.10.1.1
This attribute specifies the maximum amount of time that the IWF waits for an Originator Detection Pattern (ODP) or Answerer Detection Pattern (ADP). ODP/ADP is a series of special bit patterns used during the call setup procedures. If the IWF is the Originator of the call, it starts sending ODP patterns and waits for an ADP for the duration of T400 milliseconds from the answerer at call setup time. If the IWF is the Answerer of the call, it waits for an ODP for T400 seconds from the originator and if it receives during that time it sends an ADP pattern to the originator at the call setup time. Since both sides operate with different values of T400 timer, a higher value increases the chance of a successful call setup. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	FixedPoint2	75..254

gsmCsV42T401AckTimer		1.3.6.1.4.1.562.2.4.1.127.5.10.1.2
This attribute specifies the maximum amount of time that the IWF waits for an acknowledgment before retransmitting a frame. Since information about the T401 timer is not carried in the Exchange Identification (XID) negotiations at call setup time, both sides operate with different timer values. The value for T401 depends on many factors, such as propagation delay or frame processing time. A frame is retransmitted up to N400 times if the timer T401 expires before an acknowledgment for a frame is actually received. The performance of the data link layer can be impacted by the value of this timer as retransmissions of frames occur on expiry of timer T401. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	FixedPoint2	50..900

gsmCsV42T402AckDelayTimer		1.3.6.1.4.1.562.2.4.1.127.5.10.1.3
This attribute specifies the maximum amount of time that the IWF may wait following the receipt of any frame requiring a reply before it initiates transmission of an appropriate reply in order to ensure that the reply frame is received by the remote error-correcting entity prior to expiration of the T401 timer of the remote error-correcting entity. Since information about the T402 timer is not carried in the Exchange Identification (XID) negotiations at call setup, both sides operate with different timer values. If this timer expires, then the reply that would have been returned prior to its expiration is not sent. The performance of the data link layer can be impacted by the value of this timer as retransmissions of frames occur on expiry of timer T401. For better performance, a value of t402AckDelayTimer (T402) equal to half the value of t401AckTimer (T401) is recommended. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	FixedPoint2	25..450

gsmCsV42T403IdleProbeTimer		1.3.6.1.4.1.562.2.4.1.127.5.10.1.4
This attribute specifies the maximum amount of time that the IWF allows to elapse without frames being exchanged. The link is permitted to remain idle with no frames being exchanged on the data link. Upon expiry of this timer, the IWF polls its peer for status. Since information about the T403 timer is not carried in the Exchange Identification (XID) negotiations at call setup time, both sides operate with different timer values. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	30..90

gsmCsV42TxN401FrameSize		1.3.6.1.4.1.562.2.4.1.127.5.10.1.5
This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) frame, and a Unnumbered Information (UI) frame from the IWF to the remote entity. The default value is 128 octets, and no XID negotiations required for txN401FrameSize. If the value for txN401FrameSize value is set to other than 128 octets, then XID frames are exchanged to negotiate a value. The value provided for txN401FrameSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 128 is specified, then the IWF negotiates or attempts to negotiate a value between the 128 (as a minimum) and the given value (as a maximum). If a value less than 128 is specified, then the IWF attempts to negotiate a value between the given value (as a minimum) and 128 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to 128 is recommended. The negotiated value can be viewed in the component GsmIwfV42Op attribute txN401FrameSize. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	1..255

gsmCsV42RxN401FrameSize		1.3.6.1.4.1.562.2.4.1.127.5.10.1.6
This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) frame, and a Unnumbered Information (UI) frame from the remote entity to the IWF. The default value is 128 octets, and no XID negotiations are required for rxN401FrameSize. If the value set for rxN401FrameSize is other than 128, XID frames are exchanged to negotiate a value. The value provided for rxN401FrameSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 128 is specified, then the IWF attempts to negotiate for a value between 128 (as a minimum) and the given value (as a maximum). If a value less than 128 value is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 128 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to the default is recommended. The negotiated value can be viewed in the component GsmIwfV42Op attribute rxN401FrameSize. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	1..255

gsmCsV42TxKwindowSize		1.3.6.1.4.1.562.2.4.1.127.5.10.1.7
This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the IWF to the remote entity. The default value is 15 frames, and if this value is used then no Exchange Identification (XID) negotiations are required for txKwindowSize. If the value set for txKwindowSize is other than 15, then XID frames are exchanged to negotiate a value. The value provided for txKwindowSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 15 is specified, then the IWF attempts to negotiate a value between 15 (as a minimum) and the given value (as a maximum). If a value less than 15 is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 15 (as a maximum). Any value can be specified as long at it is within the provisionable limits. However, a value equal to or close to the default is recommended. The negotiated value can be viewed in the component GsmIwfV42Op attribute txKwindowSize. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	1..255

gsmCsV42RxKwindowSize		1.3.6.1.4.1.562.2.4.1.127.5.10.1.8
This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the remote entity to the IWF. The default value is 15 frames, and if this value is used then no Exchange Identification (XID) negotiations are required for rxKwindowSize. If the value set for rxKwindowSize is other than 15, then XID frames are exchanged to negotiate a value. The value provided for rxKwindowSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 15 is specified, then the IWF attempts to negotiate a value between 15 (as a minimum) and the given value (as a maximum). If a value less than 15 is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 15 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to the default is recommended. The negotiated value can be viewed in the component GsmIwfV42Op attribute rxKwindowSize. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	1..255

gsmCsV42N400RetransLimit		1.3.6.1.4.1.562.2.4.1.127.5.10.1.9
This attribute specifies the maximum number of times the IWF retransmits a frame upon expiry of t401AckTimer before appropriate recovery action is taken. Information about N400 (Retransmission Limit) is not carried in the Exchange Identification (XID) negotiation at call setup time so both sides operate with different N400 values. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..255

gsmCsV42bis		1.3.6.1.4.1.562.2.4.1.127.6
OBJECT IDENTIFIER

gsmCsV42bisRowStatusTable		1.3.6.1.4.1.562.2.4.1.127.6.1
This entry controls the addition and deletion of gsmCsV42bis components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsV42bisRowStatusEntry

gsmCsV42bisRowStatusEntry		1.3.6.1.4.1.562.2.4.1.127.6.1.1
A single entry in the table represents a single gsmCsV42bis component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsV42bisRowStatusEntry

gsmCsV42bisRowStatus		1.3.6.1.4.1.562.2.4.1.127.6.1.1.1
This variable is used as the basis for SNMP naming of gsmCsV42bis components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmCsV42bisComponentName		1.3.6.1.4.1.562.2.4.1.127.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmCsV42bisStorageType		1.3.6.1.4.1.562.2.4.1.127.6.1.1.4
This variable represents the storage type value for the gsmCsV42bis tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmCsV42bisIndex		1.3.6.1.4.1.562.2.4.1.127.6.1.1.10
This variable represents the index for the gsmCsV42bis tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmCsV42bisProvTable		1.3.6.1.4.1.562.2.4.1.127.6.10
This group contains the provisionable attributes for the V.42bis data compression protocol parameters used for the calls set up by this particular GsmIwfCallServer. Changes to these attributes do not effect existing calls.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsV42bisProvEntry

gsmCsV42bisProvEntry		1.3.6.1.4.1.562.2.4.1.127.6.10.1
An entry in the gsmCsV42bisProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsV42bisProvEntry

gsmCsV42bisCompressionDirection		1.3.6.1.4.1.562.2.4.1.127.6.10.1.1
This attribute specifies the V.42bis data compression direction to be supported. The value for compression direction is negotiated at link setup by the data link protocol by way of the Exchange Identification (XID) negotiation of parameter P0 (compression direction). During XID negotiation of parameter P0, both sides (IWF and mobile or IWF and Public Switched Telephone Network (PSTN)) agree on the compression direction. Valid values are: none, No compression is present. encode, The data sent by the IWF to the other entity is compressed. decode, The data received by the IWF from the other entity is compressed. both, The data sent and received by the IWF is compressed. The negotiated value can be viewed in the component GsmIwfV42bisOp attribute compressionDirection. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), encode(1), decode(2), both(3)

gsmCsV42bisMaximumCodewords		1.3.6.1.4.1.562.2.4.1.127.6.10.1.2
This attribute specifies the maximum number of V.42bis codewords the IWF supports. A codeword is a binary number that represents a string of characters in compressed form. V.42bis keeps a dictionary of codewords for each compression direction. During Exchange Identification (XID) negotiation of parameter P1 (number of codewords), both sides (IWF and mobile or IWF and Public Switched Telephone Network (PSTN)) agree on the total number of codewords in the dictionaries. Changes to this attribute impact the compression ratio for the encoder (component GsmV42BisOp attribute compRatioEncoder). Changes also impact the amount of memory used (more memory is used when increasing the attribute). The gain in performance obtained from the selection of a larger dictionary may be offset by the larger codeword size needed, and for certain types of data, better performance may be obtained by using a smaller dictionary. The negotiated value can be viewed in the component GsmIwfV42bisOp attribute maximumCodewords . Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	512 | 1024 | 2048 | 4096

gsmCsV42bisMaximumStringSize		1.3.6.1.4.1.562.2.4.1.127.6.10.1.3
This attribute specifies the maximum number of characters allowed in a string represented by a codeword that the IWF supports. Each codeword in a V.42bis dictionary represents a string of characters. During Exchange Identification (XID) negotiation of parameter P2 (maximum string size), both sides (IWF and mobile or IWF and Public Switched Telephone Network (PSTN)) agree on the maximum string length to be used in the dictionaries. Changes to this attribute impact the compression ratio for the encoder (component GsmIwfV42bisOp attribute compRatioEncoder). The negotiated value can be viewed in the component GsmIwfV42bisOp attribute maximumStringSize. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	6..250

gsmCsV42bisActionOnError		1.3.6.1.4.1.562.2.4.1.127.6.10.1.4
This attribute specifies whether or not V.42bis takes down the call or resets the link when any of the following errors occur: 1.Receipt of STEPUP (step up codeword size) codeword when it would cause C2 (current code word size) to exceed N1 (maximum code word size). 2. Receipt of a codeword, at any time, equal to C1 (next empty dictionary entry). 3. Receipt of a codeword representing an empty dictionary entry. 4. Receipt of a reserved command code. 5. Receipt of any other error. If the value is resetLink, the error corrected connection and V.42bis dictionaries are reset. Some data is lost but the call continues. If the value is takeDownCall, the call is taken down. Changes to this attribute do not effect existing calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	resetLink(0), takeDownCall(1)

gsmCsLp		1.3.6.1.4.1.562.2.4.1.127.7
OBJECT IDENTIFIER

gsmCsLpRowStatusTable		1.3.6.1.4.1.562.2.4.1.127.7.1
This entry controls the addition and deletion of gsmCsLp components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsLpRowStatusEntry

gsmCsLpRowStatusEntry		1.3.6.1.4.1.562.2.4.1.127.7.1.1
A single entry in the table represents a single gsmCsLp component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsLpRowStatusEntry

gsmCsLpRowStatus		1.3.6.1.4.1.562.2.4.1.127.7.1.1.1
This variable is used as the basis for SNMP naming of gsmCsLp components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

gsmCsLpComponentName		1.3.6.1.4.1.562.2.4.1.127.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmCsLpStorageType		1.3.6.1.4.1.562.2.4.1.127.7.1.1.4
This variable represents the storage type value for the gsmCsLp tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmCsLpIndex		1.3.6.1.4.1.562.2.4.1.127.7.1.1.10
This variable represents the index for the gsmCsLp tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Integer32	0..15

gsmCsLpOperTable		1.3.6.1.4.1.562.2.4.1.127.7.10
This group contains operational attributes pertaining to information about GsmIwfBearerChannels and logical processors associated with a GsmIwfCallServer from a high-level view.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmCsLpOperEntry

gsmCsLpOperEntry		1.3.6.1.4.1.562.2.4.1.127.7.10.1
An entry in the gsmCsLpOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmCsLpOperEntry

gsmCsLpConfiguredBearerChannels		1.3.6.1.4.1.562.2.4.1.127.7.10.1.1
This attribute indicates the number of GsmIwfBearerChannel components provisioned for the Logical Processor represented by this component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..124

gsmCsLpActiveCalls		1.3.6.1.4.1.562.2.4.1.127.7.10.1.2
This attribute indicates the number of GsmIwfBearerChannel components currently active on this LogicalProcessor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32	0..124

gsmCsLpAssignedCapacity		1.3.6.1.4.1.562.2.4.1.127.7.10.1.3
This attribute indicates what percentage (0 to 100%) of a given LogicalProcessor has been reserved for the data calls which are currently active. When the assignedCapacity reaches 100%, no new calls are established on the given LogicalProcessor. During the life of a call, the compute requirements will vary. The compute capacity required for a given call type depends on the type of call established including such factors as connection type, data compression, user rate, error correction, flow control; therefore, at call establishment the compute capacity is added to the assignedCapacity for a LogicalProcessor. When the call is released, it's compute capacity is subtracted from the assigned capacity for the Lp.The GsmIwfCallServer uses this information to balance the distribution of data calls across the logical processors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..100

gsmCsLpModemsSupported		1.3.6.1.4.1.562.2.4.1.127.7.10.1.4
This attribute indicates if modems are supported with this LogicalProcessor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(0), no(1)

gsmBc		1.3.6.1.4.1.562.2.4.1.128
OBJECT IDENTIFIER

gsmBcRowStatusTable		1.3.6.1.4.1.562.2.4.1.128.1
This entry controls the addition and deletion of gsmBc components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcRowStatusEntry

gsmBcRowStatusEntry		1.3.6.1.4.1.562.2.4.1.128.1.1
A single entry in the table represents a single gsmBc component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcRowStatusEntry

gsmBcRowStatus		1.3.6.1.4.1.562.2.4.1.128.1.1.1
This variable is used as the basis for SNMP naming of gsmBc components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

gsmBcComponentName		1.3.6.1.4.1.562.2.4.1.128.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmBcStorageType		1.3.6.1.4.1.562.2.4.1.128.1.1.4
This variable represents the storage type value for the gsmBc tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmBcTrunkGrpIndex		1.3.6.1.4.1.562.2.4.1.128.1.1.10
This variable represents an index for the gsmBc tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Integer32	1..8191

gsmBcCicIndex		1.3.6.1.4.1.562.2.4.1.128.1.1.11
This variable represents an index for the gsmBc tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2047

gsmBcOperTable		1.3.6.1.4.1.562.2.4.1.128.101
This group contains operational attributes concerning the operation of this particular GsmIwfBearerChannel for the current or most recent call.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcOperEntry

gsmBcOperEntry		1.3.6.1.4.1.562.2.4.1.128.101.1
An entry in the gsmBcOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcOperEntry

gsmBcMipState		1.3.6.1.4.1.562.2.4.1.128.101.1.1
This attribute indicates the current state of the MSC/IWF Interface Protocol (MIP) for an IWF element. Valid values are: idle, Startup state of IWF element. pendingSetup, Pending initial state of IWF element. setup, Initial state of IWF element. pendingActivation, Synchronization has been requested, but the IWF element is not yet in the Synchronization state. activated, Synchronization state. holdDisconnect, Flush buffer state, during call clearing the MSC is responsible for holding the network connection towards the disconnected party while the IWF completes the data transmission (flushing any buffered data towards the disconnected party; any buffered data towards the disconnecting party is discarded.) currentlySuspended, The call is temporarily switched to speech phase during a dual services call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(0), pendingSetup(1), setup(2), pendingActivation(3), activated(4), holdDisconnect(5), suspended(6)

gsmBcMaxUserDataRate		1.3.6.1.4.1.562.2.4.1.128.101.1.2
This attribute indicates the user rate which is in affect between the IWF and the fixed network. A user rate of 1200_75 is 75 bit/s in the receive direction 1200 bit/s in the transmit direction.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	n300(0), n600(1), n1200(2), n120075(3), n2400(4), n4800(5), n7200(6), n9600(7), n12000(8), n14400(9), n16800(10), n19200(11), n21600(12), n24000(13), n26400(14), n28800(15), n31200(16), n32000(17), n33600(18), n38400(19), n43200(20), n48000(21), n56000(22), n57600(23), n64000(24), none(25)

gsmBcConnectionType		1.3.6.1.4.1.562.2.4.1.128.101.1.3
This attribute indicates the connection types between the terminal equipment or terminal adaptor and mobile and between the IWF and the network. Valid connection types are: asynchronous, Transmission of data which does not require clocking of the data signal. synchronous, Transmission of data which requires clocking of the data signal.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	synchronous(0), asynchronous(1)

gsmBcDataBits		1.3.6.1.4.1.562.2.4.1.128.101.1.4
This attribute indicates the number of data bits encoded between start and stop bits in an asynchronous data call connection data stream. This attribute is set to notApplicable for a synchronous data call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	n7(0), n8(1), notApplicable(99)

gsmBcStopBits		1.3.6.1.4.1.562.2.4.1.128.101.1.5
This attribute indicates the number of stop bits (a mark (binary 1) placed at the end of each data byte) inserted between the data bits in an asynchronous data call connection data stream, this marks the end of the character. This attribute is set to notApplicable for a synchronous data call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	n1(0), n2(1), notApplicable(99)

gsmBcParity		1.3.6.1.4.1.562.2.4.1.128.101.1.6
This attribute indicates the type of parity for the data bits in an asynchronous data call connection data stream. Parity is a redundant bit that is added to each data byte to aid in error detection. If odd parity is used, all data bytes have an odd number of 1s, and if even parity is used, all data bytes have an even number of 1s. Also parity may be forced to 0, forced to 1, or may not be used at all (required for sending 8-bit data). This attribute will be set to notApplicable for a synchronouse data call. Valid values are: none, No parity. odd, Odd parity. even, Even parity. forced0, Parity forced to 0. forced1, Parity forced to 1. notApplicable, Parity not applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), odd(1), even(2), forced0(3), forced1(4), notApplicable(99)

gsmBcFlowControl		1.3.6.1.4.1.562.2.4.1.128.101.1.7
This attribute indicates the current flow control status of this GsmIwfBearerChannel for an asynchronous call. For a synchronous data call this attribute will be set to noFlowControlActive. Valid values are: noFlowControlActive, There is no flow control active over the air interface and network interfaces. The applications at the end points handle flow control. inband, Embedded characters in the data stream indicate flow control. v110FlowCtnrl, Utilization of V.110 flow control. errorCntrl, Flow control is handle by datalink protocols.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noFlowControlActive(0), inband(1), v110FlowCntrl(2), errorCntrl(3)

gsmBcCallType		1.3.6.1.4.1.562.2.4.1.128.101.1.8
This attribute indicates the current call type. Valid values are: faxG3, group 3 fax calls cda31khz, asynchronous 3.1kHz modem cdaUdi, asynchronous unrestricted digital data call cdsUdi, synchronous unrestricted digital data call cds31khz, synchronous 3.1kHz modem
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	faxG3(0), cda31khz(1), cdaUdi(2), cdsUdi(3), cds31khz(4)

gsmBcLastResponseCode		1.3.6.1.4.1.562.2.4.1.128.101.1.9
This attribute indicates the MSC/IWF Interface Protocol (MIP) response code returned for the last call which was active on this particular GsmIwfBearerChannel. Valid values are: requestDone, the call was terminated normally. systemError, the call was terminated due to a base system problem. applicationError, the call was terminated due to an application level problem. noResources, the call was terminated due to a lack of available resources. msgSizeMismatch, Message length does not match length defined by the MSC/IWF Interface Protocol for the particular message type. protocolViolation, Failed to perform the request because the coding of the request message was invalid; message was not understood. requestNotSupported, Message was understood but not supported by the IWF or MSC. requestDenied, Message was understood and supported by the IWF or MSC but the request is denied. invalidMessage, Message received is invalid for the current state of the IWF's state machine or the MSC data call state machine. The message is ignored. bufferNotFlushed, Message from the Iwf to the MSC indicating that the buffers are not flushed as requested by the MSC. notApplicable, this attribute is not applicable for this call. This is the default value for this attribute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	requestDone(0), systemError(1), applicationError(2), noResources(3), msgSizeMismatch(4), protocolViolation(5), requestNotSupported(6), requestDenied(7), invalidMessage(8), bufferNotFlushed(9), notApplicable(99)

gsmBcMateBearerChannel		1.3.6.1.4.1.562.2.4.1.128.101.1.10
This attribute contains the name of the mate GsmIwfBearerChannel that this GsmIwfBearerChannel is involved with in the currently active call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowPointer

gsmBcCidDataTable		1.3.6.1.4.1.562.2.4.1.128.104
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcCidDataEntry

gsmBcCidDataEntry		1.3.6.1.4.1.562.2.4.1.128.104.1
An entry in the gsmBcCidDataTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcCidDataEntry

gsmBcCustomerIdentifier		1.3.6.1.4.1.562.2.4.1.128.104.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0 | 1..8191

gsmBcStateTable		1.3.6.1.4.1.562.2.4.1.128.105
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcStateEntry

gsmBcStateEntry		1.3.6.1.4.1.562.2.4.1.128.105.1
An entry in the gsmBcStateTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcStateEntry

gsmBcAdminState		1.3.6.1.4.1.562.2.4.1.128.105.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	locked(0), unlocked(1), shuttingDown(2)

gsmBcOperationalState		1.3.6.1.4.1.562.2.4.1.128.105.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

gsmBcUsageState		1.3.6.1.4.1.562.2.4.1.128.105.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(0), active(1), busy(2)

gsmBcFramer		1.3.6.1.4.1.562.2.4.1.128.2
OBJECT IDENTIFIER

gsmBcFramerRowStatusTable		1.3.6.1.4.1.562.2.4.1.128.2.1
This entry controls the addition and deletion of gsmBcFramer components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcFramerRowStatusEntry

gsmBcFramerRowStatusEntry		1.3.6.1.4.1.562.2.4.1.128.2.1.1
A single entry in the table represents a single gsmBcFramer component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcFramerRowStatusEntry

gsmBcFramerRowStatus		1.3.6.1.4.1.562.2.4.1.128.2.1.1.1
This variable is used as the basis for SNMP naming of gsmBcFramer components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmBcFramerComponentName		1.3.6.1.4.1.562.2.4.1.128.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmBcFramerStorageType		1.3.6.1.4.1.562.2.4.1.128.2.1.1.4
This variable represents the storage type value for the gsmBcFramer tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmBcFramerIndex		1.3.6.1.4.1.562.2.4.1.128.2.1.1.10
This variable represents the index for the gsmBcFramer tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmBcFramerProvTable		1.3.6.1.4.1.562.2.4.1.128.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcFramerProvEntry

gsmBcFramerProvEntry		1.3.6.1.4.1.562.2.4.1.128.2.10.1
An entry in the gsmBcFramerProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcFramerProvEntry

gsmBcFramerInterfaceName		1.3.6.1.4.1.562.2.4.1.128.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Link

gsmBcFramerStatsTable		1.3.6.1.4.1.562.2.4.1.128.2.11
This group contains the operational statistics data for a Framer component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcFramerStatsEntry

gsmBcFramerStatsEntry		1.3.6.1.4.1.562.2.4.1.128.2.11.1
An entry in the gsmBcFramerStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcFramerStatsEntry

gsmBcFramerFrmToIf		1.3.6.1.4.1.562.2.4.1.128.2.11.1.1
This attribute counts the number of frames transmitted to the link interface by Framer. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFramerFrmFromIf		1.3.6.1.4.1.562.2.4.1.128.2.11.1.2
This attribute counts the number of frames received from the link interface by Framer. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFramerOctetFromIf		1.3.6.1.4.1.562.2.4.1.128.2.11.1.3
This attribute counts the number of bytes received from the link interface by Framer. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFramerCrcErrors		1.3.6.1.4.1.562.2.4.1.128.2.11.1.5
This attribute coutns the the total number of frames with CRC errors, occurring in the receive direction from the link. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFramerLrcErrors		1.3.6.1.4.1.562.2.4.1.128.2.11.1.6
This attribute counts the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFramerNonOctetErrors		1.3.6.1.4.1.562.2.4.1.128.2.11.1.7
This attribute counts the total number of frames that were non octet aligned. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFramerOverruns		1.3.6.1.4.1.562.2.4.1.128.2.11.1.8
This attribute counts the total number of frames received from the link for which overruns occurred. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFramerUnderruns		1.3.6.1.4.1.562.2.4.1.128.2.11.1.9
This attributecounts the total number of frames transmitted to the link for which underruns occurred. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFramerLinkTable		1.3.6.1.4.1.562.2.4.1.128.2.12
This group contains provisionable attributes for the GsmIwfFramer which controls link layer framing for application components sending and receiving data on a link interface for this particular GsmIwfBearerChannel.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcFramerLinkEntry

gsmBcFramerLinkEntry		1.3.6.1.4.1.562.2.4.1.128.2.12.1
An entry in the gsmBcFramerLinkTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcFramerLinkEntry

gsmBcFramerFramingType		1.3.6.1.4.1.562.2.4.1.128.2.12.1.1
This attribute indicates the type of framing for the link layer data received and transmitted on this channel. Valid values are: BtdsFraming, bit transparent framing required for the GsmIwfBearerChannel components on MVP cards. GsmFraming, GSM framing for the GsmIwfBearerChannel components on DS1C/E1C cards.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	btdsFraming(2), gsmFraming(8)

gsmBcFramerStateTable		1.3.6.1.4.1.562.2.4.1.128.2.13
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcFramerStateEntry

gsmBcFramerStateEntry		1.3.6.1.4.1.562.2.4.1.128.2.13.1
An entry in the gsmBcFramerStateTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcFramerStateEntry

gsmBcFramerAdminState		1.3.6.1.4.1.562.2.4.1.128.2.13.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	locked(0), unlocked(1), shuttingDown(2)

gsmBcFramerOperationalState		1.3.6.1.4.1.562.2.4.1.128.2.13.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

gsmBcFramerUsageState		1.3.6.1.4.1.562.2.4.1.128.2.13.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(0), active(1), busy(2)

gsmBcLayer1		1.3.6.1.4.1.562.2.4.1.128.3
OBJECT IDENTIFIER

gsmBcLayer1RowStatusTable		1.3.6.1.4.1.562.2.4.1.128.3.1
This entry controls the addition and deletion of gsmBcLayer1 components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcLayer1RowStatusEntry

gsmBcLayer1RowStatusEntry		1.3.6.1.4.1.562.2.4.1.128.3.1.1
A single entry in the table represents a single gsmBcLayer1 component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcLayer1RowStatusEntry

gsmBcLayer1RowStatus		1.3.6.1.4.1.562.2.4.1.128.3.1.1.1
This variable is used as the basis for SNMP naming of gsmBcLayer1 components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmBcLayer1ComponentName		1.3.6.1.4.1.562.2.4.1.128.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmBcLayer1StorageType		1.3.6.1.4.1.562.2.4.1.128.3.1.1.4
This variable represents the storage type value for the gsmBcLayer1 tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmBcLayer1Index		1.3.6.1.4.1.562.2.4.1.128.3.1.1.10
This variable represents the index for the gsmBcLayer1 tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmBcLayer1OperTable		1.3.6.1.4.1.562.2.4.1.128.3.10
This group contains physical layer operational attributes concerning the operation of this particular GsmIwfBearerChannel.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcLayer1OperEntry

gsmBcLayer1OperEntry		1.3.6.1.4.1.562.2.4.1.128.3.10.1
An entry in the gsmBcLayer1OperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcLayer1OperEntry

gsmBcLayer1ActiveMode		1.3.6.1.4.1.562.2.4.1.128.3.10.1.1
This attribute indicates the active physical layer protocol between the mobile and the IWF. Valid values are: v110, GSM V.110 rate adaptation scheme for interworking V-series connections to an Integrated Services Digital Network (ISDN). aTrau, GSM A-Transcoder/Rate Adaptor (A-TRAU).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	v110(0), aTrau(1)

gsmBcLayer1Connection		1.3.6.1.4.1.562.2.4.1.128.3.10.1.2
This attribute indicates the connection between the mobile and the IWF. Valid values are: transparent, Constant throughput, constant transit delay, and variable error rate (does not use Radio Link Protocol). nonTransparent, Improved error rate with variable transit delay and variable throughput (uses Radio Link Protocol).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	transparent(0), nonTransparent(1)

gsmBcLayer1DataRate		1.3.6.1.4.1.562.2.4.1.128.3.10.1.3
This attribute indicates the layer 1 user data rate for the currently active call for this GsmIwfBearerChannel. This is the data rate between the mobile and IWF.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..64000

gsmBcLayer1IntermediateRate		1.3.6.1.4.1.562.2.4.1.128.3.10.1.10
This attribute indicates the intermediate rate used in the physical layer rate adaptation process. This field is valid between the mobile and the IWF. For user data rates of 300 bit/s - 4800 bit/s the intermediate rate is 8 kbit/s. For user data rates 9600 bit/s and above the intermediate rate is 16 kbit/s.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	8 | 16

gsmBcLayer1StatsTable		1.3.6.1.4.1.562.2.4.1.128.3.11
This group contains physical layer statistics concerning the operation of this particular GsmIwfBearerChannel.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcLayer1StatsEntry

gsmBcLayer1StatsEntry		1.3.6.1.4.1.562.2.4.1.128.3.11.1
An entry in the gsmBcLayer1StatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcLayer1StatsEntry

gsmBcLayer1FramesTx		1.3.6.1.4.1.562.2.4.1.128.3.11.1.1
This attribute counts the number of frames transmitted on the link. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcLayer1FramesRx		1.3.6.1.4.1.562.2.4.1.128.3.11.1.2
This attribute counts the number of frames received on the link. Discarded frames are not included in this count. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcLayer1BytesTx		1.3.6.1.4.1.562.2.4.1.128.3.11.1.3
This attribute counts number of bytes transmitted on the link. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcLayer1BytesRx		1.3.6.1.4.1.562.2.4.1.128.3.11.1.4
This attribute counts the number of bytes received on the link. Bytes from discarded frames are not included in this count. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcLayer1UnderRunsTx		1.3.6.1.4.1.562.2.4.1.128.3.11.1.5
This attribute counts number of underruns, on a per-call basis, in the transmit direction reported by the hardware on the mobile-side.. These frames are not counted towards the number of frames transmitted (framesTx). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcLayer1OverRunsRx		1.3.6.1.4.1.562.2.4.1.128.3.11.1.6
This attribute counts number of overruns, on a per-call basis, in the receive direction reported by the hardware on the mobile-side. These frames are discarded. These frames are not counted towards the number of frames received (framesRx). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcLayer1NonOctetErrorsRx		1.3.6.1.4.1.562.2.4.1.128.3.11.1.7
This attribute counts the number of non-octet synchronous frame errors, on a per-call basis, received on the link reported by the hardware. This is when a frame whose bit content was not divisible by eight was detected. These frames are discarded. These frames are not counted towards the number of frames received (framesRx). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcLayer1LargeFrameErrorsRx		1.3.6.1.4.1.562.2.4.1.128.3.11.1.8
This attribute counts the number of frames, on a per-call basis, received on the link that exceeded internal buffer limits reported by the hardware. A large number of these errors could indicate a bad physical medium. These frames are discarded. These frames are not counted towards the number of frames received (framesRx). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcLayer1FramesDiscarded		1.3.6.1.4.1.562.2.4.1.128.3.11.1.9
This attribute counts the number of frames discarded, on a per-call basis, in the receive direction by software due to frame errors. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcLayer1LrcErrorsTx		1.3.6.1.4.1.562.2.4.1.128.3.11.1.10
This attribute counts the number of corrupted frames, on a per-call basis, due to memory inconsistencies found by Longitude Redundancy Check (LRC) checks at the IWF. These frames are not counted towards the number of frames transmitted (framesTx). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcModem		1.3.6.1.4.1.562.2.4.1.128.4
OBJECT IDENTIFIER

gsmBcModemRowStatusTable		1.3.6.1.4.1.562.2.4.1.128.4.1
This entry controls the addition and deletion of gsmBcModem components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcModemRowStatusEntry

gsmBcModemRowStatusEntry		1.3.6.1.4.1.562.2.4.1.128.4.1.1
A single entry in the table represents a single gsmBcModem component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcModemRowStatusEntry

gsmBcModemRowStatus		1.3.6.1.4.1.562.2.4.1.128.4.1.1.1
This variable is used as the basis for SNMP naming of gsmBcModem components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmBcModemComponentName		1.3.6.1.4.1.562.2.4.1.128.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmBcModemStorageType		1.3.6.1.4.1.562.2.4.1.128.4.1.1.4
This variable represents the storage type value for the gsmBcModem tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmBcModemIndex		1.3.6.1.4.1.562.2.4.1.128.4.1.1.10
This variable represents the index for the gsmBcModem tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmBcModemOperTable		1.3.6.1.4.1.562.2.4.1.128.4.10
This group contains operational attributes that measure performance of the modem component for this particular GsmIwfBearerChannel.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcModemOperEntry

gsmBcModemOperEntry		1.3.6.1.4.1.562.2.4.1.128.4.10.1
An entry in the gsmBcModemOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcModemOperEntry

gsmBcModemRate		1.3.6.1.4.1.562.2.4.1.128.4.10.1.2
This attribute indicates the transmission rate of the current modem in use. A rate of 1200_75 is 75 bit/s in the transmit direction and 1200 bit/s in the receive direction. All other rates are the same in both the transmit and receive directions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	n300(0), n600(1), n1200(2), n120075(3), n2400(4), n4800(5), n7200(6), n9600(7), n12000(8), n14400(9), n16800(10), n19200(11), n21600(12), n24000(13), n26400(14), n28800(15), n31200(16), n32000(17), n33600(18), n38400(19), n43200(20), n48000(21), n56000(22), n57600(23), n64000(24)

gsmBcModemAlgorithmInUse		1.3.6.1.4.1.562.2.4.1.128.4.10.1.3
This attribute indicates the current modem algorithm(s) active for the channel. Valid values are: v17, V.17 is active.V.17 is an ITU-T 14400bit/s modem standard. v27ter, V.27ter is active. V.27ter is an ITU-T 7200bit/s modem standard. v29, V.29 is active. V.29 an ITU-T 9600bit/s modem standard. v21, V.21 active. V.21 is an ITU-4 300bit/s modem standard. v22bis, V.22 or V.22bis active. V.22 ia an ITU-T modem standard that operates at 1200bit/s and 600 baud. V.22bis is an ITU-T modem standard that operates at 2400bit/s and 600 baud. v23, V.23 active. V.23 is an ITU-T modem standard that operates at a speed of 1200bit/s. v26ter, V.26ter active. V.26ter is an ITU-T modem standard that operates at a speed of 2400bit/s. v32bis, V.32 or V.32bis active. V.32 is an ITU-T modem standard that operates at 9600bit/s and 2400 baud. V.32bis is an ITU-T modem standard that operates at a speed of 14.4kbit/s. v34, V.34 active. V.34 is an ITU-T modem standard that operates at a speed of up to 28.8kbit/s. Description of bits: notused0(0) v17(1) v29(2) v27ter(3) v21(4) v22bis(5) v23(6) v26ter(7) v32bis(8) v34(9)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

gsmBcModemProtocolState		1.3.6.1.4.1.562.2.4.1.128.4.10.1.4
This attribute indicates the active protocol state of the modem in use.Valid values are: idle, Modem is in an inactive state and has no current connection established. training, Modem is attempting to establish a connection with the far end modem via handshaking. connected, Modem has establish a connection with the far end modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(0), training(1), connected(2)

gsmBcModemReceiverTransmitter		1.3.6.1.4.1.562.2.4.1.128.4.10.1.5
This attribute indicates whether the fax data modem is in receive or transmit mode. If this is not a fax data modem call, then the value is set to notApplicable. Valid values are: notApplicable, Not an applicable field. rxOnTxOff, Receiver is on, transmitter is off. rxOffTxOn, Receiver is off, transmitter is on. rxTxOn, Reciever is on, transmitter is on.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), rxOnTxOff(1), rxOffTxOn(2), rxTxOn(3)

gsmBcModemTraining		1.3.6.1.4.1.562.2.4.1.128.4.10.1.6
This attribute indicates the training procedure used by the V.17 modems. ITU-T defines two training procedures. A longer training procedure used at call setup, and a short training procedure is used during the fax call when switching from the V.21 modem to the V.17 modem. A value of notApplicable indicates that the attribute is not applicable for the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	short(0), long(1), notApplicable(99)

gsmBcModemToUpperFlowControlActive		1.3.6.1.4.1.562.2.4.1.128.4.10.1.8
This attribute indicates whether flow control was requested and an indication was sent to an upper layer protocol.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	on(0), off(1)

gsmBcModemToDspFlowControlActive		1.3.6.1.4.1.562.2.4.1.128.4.10.1.9
This attribute indicates whether an upper layer protocol requested flow control and an indication was sent to the Digital Signal Processor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	on(0), off(1)

gsmBcModemAsyncMode		1.3.6.1.4.1.562.2.4.1.128.4.10.1.10
This attribute indicates whether conversion between synchronous and asynchronous data format (specifacally, the stripping or insertion of start and stop bits) is being performed. The value will be on unless the V.42 layer is active or it is a fax call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	on(0), off(1)

gsmBcModemAutoHdlcMode		1.3.6.1.4.1.562.2.4.1.128.4.10.1.11
This attribute indicates whether High-Level Data Link Control (HDLC) functions are being performed by the modem to support HDLC applications (V.42 for example).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	on(0), off(1)

gsmBcModemOutbandFlowControl		1.3.6.1.4.1.562.2.4.1.128.4.10.1.12
This attribute indicates whether inband or outband flow control conversions are being performed. The modem performs either inband or outband flow control unless V.42 layer is active, it is a fax call, or no flow control was specified by the MSC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	on(0), off(1)

gsmBcModemOutbandBreak		1.3.6.1.4.1.562.2.4.1.128.4.10.1.13
This attribute indicates whether inband or outband break control conversions are being performed. This is when the modem detects a break condition as defined by ITU-T X.28 and reports it. When a break condition is discovered all subsequent incoming data is discarded until a start bit is received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	on(0), off(1)

gsmBcModemAutobaud		1.3.6.1.4.1.562.2.4.1.128.4.10.1.14
This attribute indicates whether autobaud is active. The modem is instructed at call setup time by the MSC on: What is the initial modem data rate value and Whether a modem is allowed to perform autobauding (on) or not (off). With Autobauding on, the modem is allowed to connect using a valid modem data rate less than or equal to the initial rate specified to the modem by the MSC. If a modem can not perform autobauding and the carrier can not be established at the initial data rate, the modem is disabled.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	on(0), off(1)

gsmBcModemStatsTable		1.3.6.1.4.1.562.2.4.1.128.4.11
This group contains operational attributes that measure performance of the modem component for this particular GsmIwfBearerChannel.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcModemStatsEntry

gsmBcModemStatsEntry		1.3.6.1.4.1.562.2.4.1.128.4.11.1
An entry in the gsmBcModemStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcModemStatsEntry

gsmBcModemBytesTx		1.3.6.1.4.1.562.2.4.1.128.4.11.1.1
This attribute counts the number of payload bytes transmitted. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcModemBytesRx		1.3.6.1.4.1.562.2.4.1.128.4.11.1.2
This attribute counts the number of payload bytes received. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcModemFramingErrors		1.3.6.1.4.1.562.2.4.1.128.4.11.1.6
This attribute counts the number of framing errors detected by the hardware. This is the absence of a stop bit after a start bit and eight bits of data. All incoming data is discarded until the next start bit is received. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV110		1.3.6.1.4.1.562.2.4.1.128.5
OBJECT IDENTIFIER

gsmBcV110RowStatusTable		1.3.6.1.4.1.562.2.4.1.128.5.1
This entry controls the addition and deletion of gsmBcV110 components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcV110RowStatusEntry

gsmBcV110RowStatusEntry		1.3.6.1.4.1.562.2.4.1.128.5.1.1
A single entry in the table represents a single gsmBcV110 component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcV110RowStatusEntry

gsmBcV110RowStatus		1.3.6.1.4.1.562.2.4.1.128.5.1.1.1
This variable is used as the basis for SNMP naming of gsmBcV110 components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmBcV110ComponentName		1.3.6.1.4.1.562.2.4.1.128.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmBcV110StorageType		1.3.6.1.4.1.562.2.4.1.128.5.1.1.4
This variable represents the storage type value for the gsmBcV110 tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmBcV110Index		1.3.6.1.4.1.562.2.4.1.128.5.1.1.10
This variable represents the index for the gsmBcV110 tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmBcV110OperTable		1.3.6.1.4.1.562.2.4.1.128.5.10
This group contains operational attributes that measure the performance of V110.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcV110OperEntry

gsmBcV110OperEntry		1.3.6.1.4.1.562.2.4.1.128.5.10.1
An entry in the gsmBcV110OperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcV110OperEntry

gsmBcV110DataRate		1.3.6.1.4.1.562.2.4.1.128.5.10.1.2
This attribute contains the layer 1 user data rate for the currently active call for this GsmIwfBearerChannel. This is the data rate between the IWF and the fixed network.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65000

gsmBcV110IntermediateRate		1.3.6.1.4.1.562.2.4.1.128.5.10.1.9
This attribute indicates the intermediate rate used in the physical layer rate adaptation process. This field is valid between the network and the IWF. For user data rates of 300 bit/s to 4800 bit/s the intermediate rate is 8 kbit/s. For a user data rate of 9600 bit/s the intermediate rate is 16 kbit/s. For user data rates of 1200 bit/s to 19200 bit/s the intermediate rate is 32 kbit/s. Data rates above this have no intermediate rate.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	n8KbitS(0), n16KbitS(1), n32KbitS(2), notApplicable(3)

gsmBcV110StatsTable		1.3.6.1.4.1.562.2.4.1.128.5.11
This group contains statistical attributes which measure the performance of V110.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcV110StatsEntry

gsmBcV110StatsEntry		1.3.6.1.4.1.562.2.4.1.128.5.11.1
An entry in the gsmBcV110StatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcV110StatsEntry

gsmBcV110FramesTx		1.3.6.1.4.1.562.2.4.1.128.5.11.1.1
This attribute counts the number of frames transmitted on the link. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV110FramesRx		1.3.6.1.4.1.562.2.4.1.128.5.11.1.2
This attribute counts the number of frames received on the link. Discarded frames are not included in this count. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV110BytesTx		1.3.6.1.4.1.562.2.4.1.128.5.11.1.3
This attribute counts the number of bytes transmitted on the link. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV110BytesRx		1.3.6.1.4.1.562.2.4.1.128.5.11.1.4
This attribute counts the number of bytes received on the link. Bytes from discarded frames are not included in this count. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV110UnderRunsTx		1.3.6.1.4.1.562.2.4.1.128.5.11.1.5
This attribute counts the number of underruns, on a per-call basis, in the transmit direction reported by the hardware on the network side. These frames are not counted towards the number of frames transmitted (framesTx). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV110OverRunsRx		1.3.6.1.4.1.562.2.4.1.128.5.11.1.6
This attribute counts the number of overruns, on a per-call basis, in the receive direction reported by the hardware on the network side. These frames are discarded. These frames are not counted towards the number of frames received (framesRx). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV110NonOctetErrorsRx		1.3.6.1.4.1.562.2.4.1.128.5.11.1.7
This attribute counts the number of non-octet synchronous frame errors, on a per-call basis, received on the link reported by the hardware. These frames are discarded. These frames are not counted towards the number of frames received (framesRx). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV110LargeFrameErrorsRx		1.3.6.1.4.1.562.2.4.1.128.5.11.1.8
This attribute counts the number of frames received on the link that exceeded internal buffer limits reported by the hardware, on a per- call basis. These frames are discarded. These frames are not counted towards the number of frames received (framesRx). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV110FramesDiscarded		1.3.6.1.4.1.562.2.4.1.128.5.11.1.9
This attribute counts the number of frames discarded, on a per-call basis, in the receive direction by software due to frame errors. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV110LrcErrorsTx		1.3.6.1.4.1.562.2.4.1.128.5.11.1.10
This attribute counts the number of corrupted frames, on a per-call basis, due to memory inconsistencies found by Longitude Redundancy Check (LRC) checks at the IWF. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFax		1.3.6.1.4.1.562.2.4.1.128.6
OBJECT IDENTIFIER

gsmBcFaxRowStatusTable		1.3.6.1.4.1.562.2.4.1.128.6.1
This entry controls the addition and deletion of gsmBcFax components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcFaxRowStatusEntry

gsmBcFaxRowStatusEntry		1.3.6.1.4.1.562.2.4.1.128.6.1.1
A single entry in the table represents a single gsmBcFax component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcFaxRowStatusEntry

gsmBcFaxRowStatus		1.3.6.1.4.1.562.2.4.1.128.6.1.1.1
This variable is used as the basis for SNMP naming of gsmBcFax components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmBcFaxComponentName		1.3.6.1.4.1.562.2.4.1.128.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmBcFaxStorageType		1.3.6.1.4.1.562.2.4.1.128.6.1.1.4
This variable represents the storage type value for the gsmBcFax tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmBcFaxIndex		1.3.6.1.4.1.562.2.4.1.128.6.1.1.10
This variable represents the index for the gsmBcFax tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmBcFaxOperTable		1.3.6.1.4.1.562.2.4.1.128.6.10
This group contains operational attributes which measure the performance of the fax protocol.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcFaxOperEntry

gsmBcFaxOperEntry		1.3.6.1.4.1.562.2.4.1.128.6.10.1
An entry in the gsmBcFaxOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcFaxOperEntry

gsmBcFaxActiveMode		1.3.6.1.4.1.562.2.4.1.128.6.10.1.1
This attribute indicates the mode of the fax T.30 protocol, determined during Exchange Identification (XID) negotiations. The following modes are supported: normal, normal T.30 protocol, Error Correction Mode (ECM) not used ecm, Error Correction Mode used. Fax error correction is done using a half-duplex page selective repeat technique.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(0), ecm(1)

gsmBcFaxProtocolState		1.3.6.1.4.1.562.2.4.1.128.6.10.1.2
This attribute indicates the protocol state of the fax adaptor. The values are: setup, call setup state idle, idle state only transmitting Synchronize (SYNC) frames bcsRx, receiving Binary Coded Signal (BCS) packet from modem bcsTx, transmitting BCS packet to modem msgRx, receiving fax message from modem msgTx, transmitting fax message to modem
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	setup(0), idle(1), bcsRx(2), bcsTx(3), msgRx(4), msgTx(5)

gsmBcFaxMessageRate		1.3.6.1.4.1.562.2.4.1.128.6.10.1.3
This attribute indicates the fax message rate used for sending fax documents.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65000

gsmBcFaxStatsTable		1.3.6.1.4.1.562.2.4.1.128.6.11
This group contains statistical attributes which measure the performance of the fax protocol.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcFaxStatsEntry

gsmBcFaxStatsEntry		1.3.6.1.4.1.562.2.4.1.128.6.11.1
An entry in the gsmBcFaxStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcFaxStatsEntry

gsmBcFaxMessageFramesRx		1.3.6.1.4.1.562.2.4.1.128.6.11.1.1
This attribute counts the number of fax message frames received from the mobile. One fax message frame is an eight byte DATA frame defined in GSM 3.45. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFaxMessageFramesTx		1.3.6.1.4.1.562.2.4.1.128.6.11.1.2
This attribute counts the number of fax message frames transmitted to the mobile. One fax message frame is an eight byte DATA frame defined in GSM 3.45. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFaxBcsFramesRx		1.3.6.1.4.1.562.2.4.1.128.6.11.1.3
This attribute counts the number of fax Binary Coded Signal (BCS) frames received from the mobile. A fax BCS frame is an 8-byte STATUS frame, which carries T.30 BCS data as defined in GSM 3.45. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFaxBcsFramesTx		1.3.6.1.4.1.562.2.4.1.128.6.11.1.4
This attribute counts the number of fax Binary Coded Signal (BCS) frames transmitted to the mobile. A fax BCS frame is an 8-byte STATUS frame, which carries T.30 BCS data as defined in GSM 3.45. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFaxPagesRxFromMobile		1.3.6.1.4.1.562.2.4.1.128.6.11.1.5
This attribute counts the number of fax pages received from the mobile. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFaxPagesTxToMobile		1.3.6.1.4.1.562.2.4.1.128.6.11.1.6
The attribute counts the number of fax pages transmitted to the mobile. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFaxChannelModeModify		1.3.6.1.4.1.562.2.4.1.128.6.11.1.7
This attribute counts the number of Channel Mode Modify (CMM) requests initiated by the IWF. For transparent fax calls, the transmission speed is determined by the two fax machines at call setup. The speed may change during the transmission to satisfy the T.30 protocol. The CMM request is used by the GSM IWF to request that the T.30 requested speed change can be propagated throughout the network. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcFaxBcsFrameErrors		1.3.6.1.4.1.562.2.4.1.128.6.11.1.8
This attribute counts the number of fax Binary Coded Signal (BCS) frames in error. This attribute indicates the count of corrupted fax BCS frames over the GSM radio channel. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcRlp		1.3.6.1.4.1.562.2.4.1.128.7
OBJECT IDENTIFIER

gsmBcRlpRowStatusTable		1.3.6.1.4.1.562.2.4.1.128.7.1
This entry controls the addition and deletion of gsmBcRlp components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcRlpRowStatusEntry

gsmBcRlpRowStatusEntry		1.3.6.1.4.1.562.2.4.1.128.7.1.1
A single entry in the table represents a single gsmBcRlp component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcRlpRowStatusEntry

gsmBcRlpRowStatus		1.3.6.1.4.1.562.2.4.1.128.7.1.1.1
This variable is used as the basis for SNMP naming of gsmBcRlp components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmBcRlpComponentName		1.3.6.1.4.1.562.2.4.1.128.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmBcRlpStorageType		1.3.6.1.4.1.562.2.4.1.128.7.1.1.4
This variable represents the storage type value for the gsmBcRlp tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmBcRlpIndex		1.3.6.1.4.1.562.2.4.1.128.7.1.1.10
This variable represents the index for the gsmBcRlp tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmBcRlpOperTable		1.3.6.1.4.1.562.2.4.1.128.7.10
This group contains operational attributes that measure performance of the GsmIwfBearerChannel.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcRlpOperEntry

gsmBcRlpOperEntry		1.3.6.1.4.1.562.2.4.1.128.7.10.1
An entry in the gsmBcRlpOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcRlpOperEntry

gsmBcRlpProtocolState		1.3.6.1.4.1.562.2.4.1.128.7.10.1.1
This attribute indicates the last Radio Link Protocol (RLP) state before call take down. The following are the states: detached, Initial State. The call has not even started. disconnected, Asynchronous Disconnected Mode (ADM). connPending, In ADM, but sent Set Asynchronous Balanced Mode (SABM) and waiting for a response. discPending, Sent Disconnect (DISC), waiting for a response. connectEstablished, In Asynchronous Balanced Mode (ABM), Information frames can be exchanged. synchronized, Synchronization state entered after a change of channel coding. Handles REMAP procedure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	detached(0), disconnected(1), connPending(2), discPending(3), connectEstablished(4), synchronized(5)

gsmBcRlpFrameSize		1.3.6.1.4.1.562.2.4.1.128.7.10.1.2
This attribute indicates the current Radio Link Protocol (RLP) frame size transmitted. The size of the frame depends on the radio channel type. The frames can be 240 bits long for 12 kbit/s and 6 kbit/s or 576 bits long for 14.5 kbit/s.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65000

gsmBcRlpHighestVersion		1.3.6.1.4.1.562.2.4.1.128.7.10.1.3
This attribute indicates the current highest version of the Radio Link Protocol (RLP) protocol negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). Valid values are: 0, Single-link basic version. 1, Single-link extended version (for example, extended by data compression). The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute highestVersion.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1

gsmBcRlpIwfToMsWindowSize		1.3.6.1.4.1.562.2.4.1.128.7.10.1.4
This attribute indicates the current IWF to mobile window size negotiated by the Radio Link Protocol (RLP) during Exchange Information (XID). The window size is the maximum number of sequentially numbered Information (I) frames that may be unacknowledged at any given time. GSM specification 4.22 defines the range as 0 to 61. The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute iwftoMsWindowSize.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..61

gsmBcRlpMsToIwfWindowSize		1.3.6.1.4.1.562.2.4.1.128.7.10.1.5
This attribute indicates the current mobile to IWF window size negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). The window size is the maximum number of sequentially numbered Information (I) frames that may be unacknowledged at any given time. GSM specification 4.22 defines the range as 0 to 61. The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute msToIwfWindowSize.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..61

gsmBcRlpT1AckTimer		1.3.6.1.4.1.562.2.4.1.128.7.10.1.6
This attribute indicates the current T1 timer negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). This is the period in milliseconds within which an acknowledgment of a sent frame must be received. Once this timer expires, the transmitting RLP entity shall assume that the frame was lost. The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute t1AckTimer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	380..1020

gsmBcRlpT2AckDelayTimer		1.3.6.1.4.1.562.2.4.1.128.7.10.1.7
This attribute indicates the current T2 timer negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). This is the maximum period in milliseconds the receiving RLP entity shall wait before sending an acknowledgment for a received in sequenced frame. The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute t2AckDelayTimer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	10..70

gsmBcRlpN2RetransmitCount		1.3.6.1.4.1.562.2.4.1.128.7.10.1.8
This attribute indicates the current value of N2 negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). This is the maximum number of times a RLP entity shall retransmit an individual frame following the expiry of timer T1. The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute n2RetransmitCount.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..255

gsmBcRlpStatsTable		1.3.6.1.4.1.562.2.4.1.128.7.11
This group contains operational attributes that measure performance of the GsmIwfBearerChannel.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcRlpStatsEntry

gsmBcRlpStatsEntry		1.3.6.1.4.1.562.2.4.1.128.7.11.1
An entry in the gsmBcRlpStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcRlpStatsEntry

gsmBcRlpIFramesTx		1.3.6.1.4.1.562.2.4.1.128.7.11.1.1
This attribute counts the number of valid Information frames transmitted. This count does not include the Information frames discarded. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcRlpIFramesRx		1.3.6.1.4.1.562.2.4.1.128.7.11.1.2
This attributes counts the number of valid Information (I) frames received. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcRlpFramesRetransmitted		1.3.6.1.4.1.562.2.4.1.128.7.11.1.3
This attribute counts the total number of frames retransmitted. Frames that are not acknowledged within the T1 timer are retransmitted. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcRlpT1AckTimeouts		1.3.6.1.4.1.562.2.4.1.128.7.11.1.4
This attribute counts the total number of T1 timer time-outs. Retransmission of all unacknowledged frames is started after T1 timer expiry. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcRlpInvalidFrames		1.3.6.1.4.1.562.2.4.1.128.7.11.1.5
This attribute counts the number of invalid frames received. These invalid frames are frames received from the mobile which contain errors in the header information. This count does not include the number of frames with Cyclic Redundancy Check (CRC) errors or out-of-sequence Frame Errors. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcRlpCrcErrorsRx		1.3.6.1.4.1.562.2.4.1.128.7.11.1.6
This attribute counts the number of frames with Cyclic Redundancy Check (CRC) errors received by the IWF Radio Link Protocol (RLP) entity. CRC is a type of block check character that is very effective in detecting communications errors. CRCs are commonly 16 or 32 bits long (though, in GSM non-transparent services, a 24- bit CRC is used). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcRlpOutOfSequenceFrames		1.3.6.1.4.1.562.2.4.1.128.7.11.1.7
This attribute counts the number of out-of-sequence Information frames received by the IWF Radio Link Protocol (RLP) entity. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcRlpRemoteBusyIndications		1.3.6.1.4.1.562.2.4.1.128.7.11.1.8
This attribute counts the number of times the mobile Radio Link Protocol (RLP) entity is busy (that is, it is in Asynchronous Balanced Mode (ABM) and is not ready to receive Information frames). The RLP entity is considered to be not ready to receive information frames if the mobile sends a flow control indication RNR (Receive Not Ready). A Receive Ready is sent to the RLP entity when the mobile is ready to receive data. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcRlpLocalBusyIndications		1.3.6.1.4.1.562.2.4.1.128.7.11.1.9
This attribute counts the number of times the IWF RLP entity is busy (that is it is in Asynchronous Balanced Mode (ABM) and is not ready to receive Information frames). When the network side introduces flow control towards the mobile and a Receive Not Ready (RNR) is sent to the mobile to stop the mobile from sending any more data frames. A Receive Ready (RR) is sent to the mobile when the RLP entity is ready to receive data. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcRlpIFramesTxDiscarded		1.3.6.1.4.1.562.2.4.1.128.7.11.1.10
This attribute counts the number of frames discarded by the IWF. Untransmitted and unacknowledged frames are discarded when a Set Asynchronous Balanced Mode (SABM) or Disconnect (DISC) is received or sent in Asynchronous Balanced Mode (ABM) mode. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcRlpResetsRx		1.3.6.1.4.1.562.2.4.1.128.7.11.1.11
This attribute counts the number of resets sent by the mobile. Loss of information may occur when a reset is issued. A reset is issued by the mobile on failure of checkpoint recovery. That is if the mobile does not receive acknowledgment for its information frame, it does checkpoint recovery (it sends a supervisory frame requesting the status of the other entity. If the responding entity fails to respond to N2 of this checkpoint frame a reset is initiated by the originating entity. A reset can also be issued by the mobile during handover where a loss of connection or synchronization occurs. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42		1.3.6.1.4.1.562.2.4.1.128.8
OBJECT IDENTIFIER

gsmBcV42RowStatusTable		1.3.6.1.4.1.562.2.4.1.128.8.1
This entry controls the addition and deletion of gsmBcV42 components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcV42RowStatusEntry

gsmBcV42RowStatusEntry		1.3.6.1.4.1.562.2.4.1.128.8.1.1
A single entry in the table represents a single gsmBcV42 component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcV42RowStatusEntry

gsmBcV42RowStatus		1.3.6.1.4.1.562.2.4.1.128.8.1.1.1
This variable is used as the basis for SNMP naming of gsmBcV42 components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmBcV42ComponentName		1.3.6.1.4.1.562.2.4.1.128.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmBcV42StorageType		1.3.6.1.4.1.562.2.4.1.128.8.1.1.4
This variable represents the storage type value for the gsmBcV42 tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmBcV42Index		1.3.6.1.4.1.562.2.4.1.128.8.1.1.10
This variable represents the index for the gsmBcV42 tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmBcV42OperTable		1.3.6.1.4.1.562.2.4.1.128.8.10
This group contains operational attributes which measure V.42 error detection and correction performance.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcV42OperEntry

gsmBcV42OperEntry		1.3.6.1.4.1.562.2.4.1.128.8.10.1
An entry in the gsmBcV42OperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcV42OperEntry

gsmBcV42ProtocolState		1.3.6.1.4.1.562.2.4.1.128.8.10.1.1
This attribute indicates the state of V.42. Valid states are: notActive, The V.42 link connection with the Public Switched Telephoned Network) PSTN modem is not established. None of the V.42 functions including the error detection, error correction, and flow control is provided to the data call. This is the initial state of V.42. disconnected, This means that the V42 link is disconnected. linksetup, The V.42 operation enters this state from the disconnected state after the V.42 sends to the PSTN modem a Set Asynchronous Balanced Mode Extended (SABME) frame in an attempt to establish the error control connection with the PSTN modem. frameReject, The V.42 operation enters into this state after it identifies an invalid frame sent by the peer and it sends back a frame reject (FRMR) frame to the peer. disconnectRequest, The V.42 operation enters into this state after it sends to the peer a disconnect (DISC) frame with the attempt to disconnect the V.42 error control link. informationTransfer, The V.42 enters into this state after it receives a UA (unnumbered acknowledgment) frame which the peer sent upon receipt of the SAMBE frame from IWF V.42. Once in this state, the V.42 can exchange data and supervisory information with its peer. waitingAck, The V.42 enters this state after it sends polling enquiry to its peer. The V.42 sends the polling enquiry when it receives a reject frame (REJ) from its peer or either its acknowledgment timer or inactivity timer timed out on the information frames sent out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notActive(0), disconnected(1), linksetup(2), frameReject(3), disconnectRequest(4), informationTransfer(5), waitingAck(6)

gsmBcV42TxN401FrameSize		1.3.6.1.4.1.562.2.4.1.128.8.10.1.2
This attribute indicates the current value of parameter N401 for V.42 which is negotiated during Exchange Information (XID). This is the maximum number of octets that can be carried in the information field of an information frame that the IWF V.42 transmits to the Public Switched Telephone Network (PSTN) modem. The IWF V.42 puts this or even smaller size of data into the outgoing information frame. The value used for XID negotiations can be provisioned by component GsmIwfV42 attribute txN401FrameSize.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65355

gsmBcV42RxN401FrameSize		1.3.6.1.4.1.562.2.4.1.128.8.10.1.3
This attribute indicates the current value of N401, that is negotiated during Exchange Identification (XID). This is the maximum number of octets that can be carried in the information field of an information frame received from the Public Switched Telephone Network (PSTN) modem. An incoming information frame carrying data octets more than this size shall be rejected by the IWF V.42. The value used for XID negotiations can be provisioned by component GsmIwfV42 attribute rxN401FrameSize.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	1..255

gsmBcV42TxKwindowSize		1.3.6.1.4.1.562.2.4.1.128.8.10.1.4
This attribute indicates the current value of k, that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used for the information frames that the V.42 transmits to the Public Switched Telephone Network (PSTN) modem. This size governs the maximum number of information frames that the IWF V.42 error-correcting entity can have outstanding (that is, unacknowledged). The value used for XID negotiations can be provisioned by component GsmIwfV42 attribute txKwindowSize.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..127

gsmBcV42RxKwindowSize		1.3.6.1.4.1.562.2.4.1.128.8.10.1.5
This attribute indicates the current value of k that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used for information frames transmitted from the Public Switched Telephone Network (PSTN) modem. This size governs the maximum number of information frames that the peer of the IWF V.42 error-correcting entity can have outstanding (that is, unacknowledged). The value used for XID negotiations can be provisioned by component GsmIwfV42 attribute rxKwindowSize.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	1..127

gsmBcV42StatsTable		1.3.6.1.4.1.562.2.4.1.128.8.11
This group contains statistical attributes that measure the V.42 error detection and correction performance.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcV42StatsEntry

gsmBcV42StatsEntry		1.3.6.1.4.1.562.2.4.1.128.8.11.1
An entry in the gsmBcV42StatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcV42StatsEntry

gsmBcV42IBytesRx		1.3.6.1.4.1.562.2.4.1.128.8.11.1.1
This attribute counts the total number of bytes that the V.42 actually received from the Public Switched Telephone Network (PSTN) modem in a data call. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42IBytesTx		1.3.6.1.4.1.562.2.4.1.128.8.11.1.2
This attribute counts the total number of bytes that the V.42 transmitted to the Public Switched Telephone Network (PSTN) modem in a data call. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42IFramesRx		1.3.6.1.4.1.562.2.4.1.128.8.11.1.3
This attribute counts the total number of Information (I) frames that the V.42 received from the Public Switched Telephone Network (PSTN) modem in a data call. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42IFramesTx		1.3.6.1.4.1.562.2.4.1.128.8.11.1.4
This attribute counts the total number of information frames that the V.42 transmitted to the Public Switched Telephone Network (PSTN) modem in a data call. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42FramesRetransmitted		1.3.6.1.4.1.562.2.4.1.128.8.11.1.5
This attribute counts the total number of frames retransmitted by the IWF V.42 entity in a data call. The V.42 retransmits the same frame when the associated T401 acknowledgment timer time-outs or when a Reject (REJ) supervisory frame has been received from the Public Switched Telephone Network (PSTN) modem. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42T1AckTimeouts		1.3.6.1.4.1.562.2.4.1.128.8.11.1.6
This attribute counts the total number of times that the T401 timer has timed out within a data call. If this timer times-out frequently, the operator may need to adjust the provisional parameter T401 acknowledgment timer to a larger time amount, since every time that V.42 sends out a frame it sets the T401 timer to wait for the peer's acknowledgment of the frame. When the timer times-out and no acknowledgment has been received, the V.42 sends the same frame to its peer. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42RemoteBusyIndications		1.3.6.1.4.1.562.2.4.1.128.8.11.1.7
This attribute counts the total number of times the Public Switched Telephone Network (PSTN) modem enters a busy state (the IWF has received a Receive Not Ready message) and asks the IWF V.42 not to send Information (I) frames to it until it is ready to receive information frames again (indicated by receipt of a Receive Ready message or a data message). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42LocalBusyIndications		1.3.6.1.4.1.562.2.4.1.128.8.11.1.8
This attribute counts the total number of times the IWF V.42 enters in a busy condition and asks the peer to stop sending information frames until it has cleared up from the busy condition. The V.42 enters busy condition when its data buffer is about to be overflowed by the incoming Information (I) frames. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42BadFramesRx		1.3.6.1.4.1.562.2.4.1.128.8.11.1.9
This attribute counts the total number of bad frames the IWF V.42 has received from the Public Switched Telephone Network (PSTN) remote modem within the data call. In this instance, 'bad frames' refer to the V.42 protocol error frames other than the check sequence error frames. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42CrcErrorsRx		1.3.6.1.4.1.562.2.4.1.128.8.11.1.10
This attribute counts the total number of frames received from the remote Public Switched Telephone Network (PSTN) modem that contain incorrect frame check sequence. A high value signifies the condition of the physical medium is poor. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42bis		1.3.6.1.4.1.562.2.4.1.128.9
OBJECT IDENTIFIER

gsmBcV42bisRowStatusTable		1.3.6.1.4.1.562.2.4.1.128.9.1
This entry controls the addition and deletion of gsmBcV42bis components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcV42bisRowStatusEntry

gsmBcV42bisRowStatusEntry		1.3.6.1.4.1.562.2.4.1.128.9.1.1
A single entry in the table represents a single gsmBcV42bis component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcV42bisRowStatusEntry

gsmBcV42bisRowStatus		1.3.6.1.4.1.562.2.4.1.128.9.1.1.1
This variable is used as the basis for SNMP naming of gsmBcV42bis components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmBcV42bisComponentName		1.3.6.1.4.1.562.2.4.1.128.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmBcV42bisStorageType		1.3.6.1.4.1.562.2.4.1.128.9.1.1.4
This variable represents the storage type value for the gsmBcV42bis tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmBcV42bisIndex		1.3.6.1.4.1.562.2.4.1.128.9.1.1.10
This variable represents the index for the gsmBcV42bis tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmBcV42bisOperTable		1.3.6.1.4.1.562.2.4.1.128.9.10
This group contains operational attributes that measure the performance of V.42bis.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcV42bisOperEntry

gsmBcV42bisOperEntry		1.3.6.1.4.1.562.2.4.1.128.9.10.1
An entry in the gsmBcV42bisOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcV42bisOperEntry

gsmBcV42bisProtocolModeEncoder		1.3.6.1.4.1.562.2.4.1.128.9.10.1.1
This attribute indicates the current mode of the V.42bis encoder. This mode can be either: transparent - A mode of operation in which compression has been selected but data is being transmitted in uncompressed form. Transparent mode command sequences may be inserted into the data stream. compressed - A mode of operation in which data is transmitted in codewords. The encoder switches between the two modes depending on whether the data coming from the Date Terminal Equipment (DTE) is suitable for compression. The data comression function periodically determines the compressibility of the data based on a comparison of the number of bits required to represent a segment of the data stream before and after compression.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	transparent(0), compressed(1)

gsmBcV42bisProtocolModeDecoder		1.3.6.1.4.1.562.2.4.1.128.9.10.1.2
This attribute indicates the current mode of the V.42bis decoder. This mode can be either: transparent - A mode of operation in which compression has been selected but data is being transmitted in uncompressed form. Transparent mode command sequences may be inserted into the data stream. compressed - A mode of operation in which data is transmitted in codewords. The encoder (at the mobile or Public Switched Telephone Network) switches between the two modes depending on whether the data coming from the Date Terminal Equipment (DTE) is suitable for compression. The data comression function periodically determines the compressibility of the data based on a comparison of the number of bits required to represent a segment of the data stream before and after compression.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	transparent(0), compressed(1)

gsmBcV42bisCompressionDirection		1.3.6.1.4.1.562.2.4.1.128.9.10.1.3
This attribute indicates the direction in which V.42bis is active, negotiated at link setup by the data link protocol through Exchange Identification (XID) negotiation of parameter P0 (compression direction). The value used for XID negotiations can be provisioned by component GsmIwfV42bisProv attribute compressionDirection. Valid values are: none, No compression is present. encode, The data sent by the IWF to the other entity is compressed. decode, The data received by the IWF from the other entity is compressed. both, The data sent and received by the IWF is compressed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), encode(1), decode(2), both(3)

gsmBcV42bisMaximumCodewords		1.3.6.1.4.1.562.2.4.1.128.9.10.1.4
This attribute indicates the maximum number of codewords in the dictionary negotiated at link setup by the data link protocol by way of the Exchange Identification (XID) negotiation of parameter P1 (number of codewords). The value used for XID negotiations can be provisioned by component GsmIwfV42bisProv attribute maximumCodewords.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4096

gsmBcV42bisMaximumStringSize		1.3.6.1.4.1.562.2.4.1.128.9.10.1.5
This attribute indicates the maximum number of characters allowed in a string represented by a codeword negotiated at link setup by the data link protocol by way of the Exchange Identification (XID) negotiation of parameter P2 (maximum string size). The value used for XID negotiations can be provisioned by component GsmIwfV42bisProv attribute maximumStringSize.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	6..250

gsmBcV42bisLastDecodeError		1.3.6.1.4.1.562.2.4.1.128.9.10.1.6
This attribute indicates last error found by the decoder. Error values are: none, No errors found. badStepup, Receipt of STEPUP (step up codeword size) codeword when it would cause C2 (current code word size) to exceed N1 (maximum code word size). codewordEqC1, Receipt of a codeword, at any time, equal to C1 (next empty dictionary entry). emptyCodeword, Receipt of a codeword representing an empty dictionary entry. reservedCommand, Receipt of a reserved command code. generalError, Receipt of any other error. The action taken by V.42bis on detecting an error is provisioned by component GsmIwfV42bis attribute actionOnError.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), badStepup(1), codewordEqC1(2), emptyCodeword(3), reservedCommand(4), generalError(5)

gsmBcV42bisCompRatioEncoder		1.3.6.1.4.1.562.2.4.1.128.9.10.1.7
This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being compressed. This is the compression ratio achieved by the V.42bis encoder running on the Passport. This attribute is relevant for both protocol modes transparent and compressed as the encoder switches between the two modes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	FixedPoint2	0..30000

gsmBcV42bisCompRatioDecoder		1.3.6.1.4.1.562.2.4.1.128.9.10.1.8
This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being compressed. This is the compression ratio achieved by the V.42bis encoder at the mobile or Public Switched Telephone Network (PSTN). This attribute is relevant for both protocol modes transparent and compressed as the encoder switches between the two modes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	FixedPoint2	0..30000

gsmBcV42bisStatsTable		1.3.6.1.4.1.562.2.4.1.128.9.11
This group contains operational attributes that measure the performance of V.42bis.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcV42bisStatsEntry

gsmBcV42bisStatsEntry		1.3.6.1.4.1.562.2.4.1.128.9.11.1
An entry in the gsmBcV42bisStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcV42bisStatsEntry

gsmBcV42bisModeChangesEncode		1.3.6.1.4.1.562.2.4.1.128.9.11.1.1
This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the encoder. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42bisModeChangesDecode		1.3.6.1.4.1.562.2.4.1.128.9.11.1.2
This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the decoder. The mode changes are determined by the encoder at the mobile or the Public Switched Telephone Network (PSTN). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42bisResetsEncode		1.3.6.1.4.1.562.2.4.1.128.9.11.1.3
This attribute counts the number of resets sent by the encoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42bisResetsDecode		1.3.6.1.4.1.562.2.4.1.128.9.11.1.4
This attribute counts the number of resets received by the decoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The resets of the decoder are determined by the encoder at the mobile or Public Switched Telephone Network (PSTN). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42bisReInitializations		1.3.6.1.4.1.562.2.4.1.128.9.11.1.5
This attribute counts the number of times V.42bis is reinitialized because of a destructive break (a destructive break is a break that causes data to be discarded) occurring on the error-corrected connection initiatated by either the mobile or Public Switched Telephone Network (PSTN). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcV42bisErrorsInDecode		1.3.6.1.4.1.562.2.4.1.128.9.11.1.6
This attribute counts the number of errors found by the decoder. The errors could be any of the following: 1.Receipt of STEPUP (step up codeword size) codeword when it would cause C2 (current code word size) to exceed N1 (maximum code word size). 2. Receipt of a codeword, at any time, equal to C1 (next empty dictionary entry). 3. Receipt of a codeword representing an empty dictionary entry. 4. Receipt of a reserved command code. 5. Receipt of any other error. The counter wraps when it exceeds the maximum value. The action taken by V.42bis on detecting any of these errors is provisioned by component GsmIwfV42bis attribute actionOnError.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcL2RCop		1.3.6.1.4.1.562.2.4.1.128.10
OBJECT IDENTIFIER

gsmBcL2RCopRowStatusTable		1.3.6.1.4.1.562.2.4.1.128.10.1
This entry controls the addition and deletion of gsmBcL2RCop components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcL2RCopRowStatusEntry

gsmBcL2RCopRowStatusEntry		1.3.6.1.4.1.562.2.4.1.128.10.1.1
A single entry in the table represents a single gsmBcL2RCop component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcL2RCopRowStatusEntry

gsmBcL2RCopRowStatus		1.3.6.1.4.1.562.2.4.1.128.10.1.1.1
This variable is used as the basis for SNMP naming of gsmBcL2RCop components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmBcL2RCopComponentName		1.3.6.1.4.1.562.2.4.1.128.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmBcL2RCopStorageType		1.3.6.1.4.1.562.2.4.1.128.10.1.1.4
This variable represents the storage type value for the gsmBcL2RCop tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmBcL2RCopIndex		1.3.6.1.4.1.562.2.4.1.128.10.1.1.10
This variable represents the index for the gsmBcL2RCop tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmBcL2RCopOperTable		1.3.6.1.4.1.562.2.4.1.128.10.10
This group contains operational attributes that measure the performance of L2RCop.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcL2RCopOperEntry

gsmBcL2RCopOperEntry		1.3.6.1.4.1.562.2.4.1.128.10.10.1
An entry in the gsmBcL2RCopOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcL2RCopOperEntry

gsmBcL2RCopFlowControlStateTx		1.3.6.1.4.1.562.2.4.1.128.10.10.1.1
This attribute indicates whether flow control is active in the transmit direction (towards the network side) for Layer2 Relay.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(0), inactive(1)

gsmBcL2RCopFlowControlStateRx		1.3.6.1.4.1.562.2.4.1.128.10.10.1.2
This attribute indicates whether flow control is active in the receive direction (towards the mobile) for Layer2 Relay.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(0), inactive(1)

gsmBcL2RCopStatsTable		1.3.6.1.4.1.562.2.4.1.128.10.11
This group contains operational attributes that measure the performance of L2RCop.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcL2RCopStatsEntry

gsmBcL2RCopStatsEntry		1.3.6.1.4.1.562.2.4.1.128.10.11.1
An entry in the gsmBcL2RCopStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcL2RCopStatsEntry

gsmBcL2RCopBytesTx		1.3.6.1.4.1.562.2.4.1.128.10.11.1.1
This attribute counts the number of data bytes relayed by Layer2 Relay in the transmit direction (towards the network). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcL2RCopBytesRx		1.3.6.1.4.1.562.2.4.1.128.10.11.1.2
This attribute counts the number of data bytes relayed by Layer2 Relay in the receive direction (towards the mobile). The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcL2RCopBreakCountRx		1.3.6.1.4.1.562.2.4.1.128.10.11.1.3
This attribute counts the number of breaks received from the mobile. A break received from the mobile results in the V.42bis function being reset and the break condition forwarded to the network. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcL2RCopBreakCountTx		1.3.6.1.4.1.562.2.4.1.128.10.11.1.4
This attribute counts the number of breaks transmitted to the mobile (a break was received from the network). A break received from the network results in the V.42bis function being reset and the break condition forwarded to the mobile. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcUpperRelay		1.3.6.1.4.1.562.2.4.1.128.11
OBJECT IDENTIFIER

gsmBcUpperRelayRowStatusTable		1.3.6.1.4.1.562.2.4.1.128.11.1
This entry controls the addition and deletion of gsmBcUpperRelay components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcUpperRelayRowStatusEntry

gsmBcUpperRelayRowStatusEntry		1.3.6.1.4.1.562.2.4.1.128.11.1.1
A single entry in the table represents a single gsmBcUpperRelay component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcUpperRelayRowStatusEntry

gsmBcUpperRelayRowStatus		1.3.6.1.4.1.562.2.4.1.128.11.1.1.1
This variable is used as the basis for SNMP naming of gsmBcUpperRelay components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

gsmBcUpperRelayComponentName		1.3.6.1.4.1.562.2.4.1.128.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

gsmBcUpperRelayStorageType		1.3.6.1.4.1.562.2.4.1.128.11.1.1.4
This variable represents the storage type value for the gsmBcUpperRelay tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

gsmBcUpperRelayIndex		1.3.6.1.4.1.562.2.4.1.128.11.1.1.10
This variable represents the index for the gsmBcUpperRelay tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

gsmBcUpperRelayOperTable		1.3.6.1.4.1.562.2.4.1.128.11.10
This group contains operational attributes that measure the performance of the UpperRelay.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcUpperRelayOperEntry

gsmBcUpperRelayOperEntry		1.3.6.1.4.1.562.2.4.1.128.11.10.1
An entry in the gsmBcUpperRelayOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcUpperRelayOperEntry

gsmBcUpperRelayBufferSize		1.3.6.1.4.1.562.2.4.1.128.11.10.1.1
This attribute indicates the size of the transmit and receive flow control buffers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

gsmBcUpperRelayFlowControlStateTx		1.3.6.1.4.1.562.2.4.1.128.11.10.1.2
This attribute indicates whether the transmit flow control is active or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(0), inactive(1)

gsmBcUpperRelayFlowControlStateRx		1.3.6.1.4.1.562.2.4.1.128.11.10.1.3
This attribute indicates whether the receive flow control is active or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(0), inactive(1)

gsmBcUpperRelayStatsTable		1.3.6.1.4.1.562.2.4.1.128.11.11
This group contains operational attributes that measure the performance of the UpperRelay.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GsmBcUpperRelayStatsEntry

gsmBcUpperRelayStatsEntry		1.3.6.1.4.1.562.2.4.1.128.11.11.1
An entry in the gsmBcUpperRelayStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	GsmBcUpperRelayStatsEntry

gsmBcUpperRelayFramesTx		1.3.6.1.4.1.562.2.4.1.128.11.11.1.1
This attribute counts the number of frames that are sent in the transmit direction. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcUpperRelayFramesRx		1.3.6.1.4.1.562.2.4.1.128.11.11.1.2
This attribute counts the number of frames that are sent in the receive direction. The counter wraps when it exceeds the maximum value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

gsmBcUpperRelayUnacknowledgedFrames		1.3.6.1.4.1.562.2.4.1.128.11.11.1.3
This attribute indicates the number of current frames sent that have not been acknowledged.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32	0..4294967295

gsmIwfGroup		1.3.6.1.4.1.562.2.4.2.129.1
OBJECT IDENTIFIER

gsmIwfGroupBE		1.3.6.1.4.1.562.2.4.2.129.1.5
OBJECT IDENTIFIER

gsmIwfGroupBE01		1.3.6.1.4.1.562.2.4.2.129.1.5.2
OBJECT IDENTIFIER

gsmIwfGroupBE01A		1.3.6.1.4.1.562.2.4.2.129.1.5.2.2
OBJECT IDENTIFIER

gsmIwfCapabilities		1.3.6.1.4.1.562.2.4.2.129.3
OBJECT IDENTIFIER

gsmIwfCapabilitiesBE		1.3.6.1.4.1.562.2.4.2.129.3.5
OBJECT IDENTIFIER

gsmIwfCapabilitiesBE01		1.3.6.1.4.1.562.2.4.2.129.3.5.2
OBJECT IDENTIFIER

gsmIwfCapabilitiesBE01A		1.3.6.1.4.1.562.2.4.2.129.3.5.2.2
OBJECT IDENTIFIER