Nortel-Magellan-Passport-IpxMIB

File: Nortel-Magellan-Passport-IpxMIB.mib (127924 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-VirtualRouterMIB

Imported symbols

OBJECT-TYPE passportMIBs Counter32
PhysAddress DisplayString StorageType
RowStatus Gauge32 Integer32
Unsigned32 AsciiString DashedHexString
NonReplicated Hex AsciiStringIndex
vrIndex vrPpIndex vrPp
vr

Defined Types

VrPpIpxPRowStatusEntry  
SEQUENCE    
  vrPpIpxPRowStatus RowStatus
  vrPpIpxPComponentName DisplayString
  vrPpIpxPStorageType StorageType
  vrPpIpxPIndex INTEGER

VrPpIpxPAdminControlEntry  
SEQUENCE    
  vrPpIpxPSnmpAdminStatus INTEGER

VrPpIpxPProvEntry  
SEQUENCE    
  vrPpIpxPNetworkNumberProv DashedHexString
  vrPpIpxPDefaultType INTEGER
  vrPpIpxPBroadcastInhibit INTEGER

VrPpIpxPSresProvEntry  
SEQUENCE    
  vrPpIpxPSourceRouteEndStationSupport INTEGER

VrPpIpxPStateEntry  
SEQUENCE    
  vrPpIpxPAdminState INTEGER
  vrPpIpxPOperationalState INTEGER
  vrPpIpxPUsageState INTEGER

VrPpIpxPOperStatusEntry  
SEQUENCE    
  vrPpIpxPSnmpOperStatus INTEGER

VrPpIpxPOperEntry  
SEQUENCE    
  vrPpIpxPType INTEGER
  vrPpIpxPEncapsulation INTEGER
  vrPpIpxPNetworkNumber DashedHexString
  vrPpIpxPNode DashedHexString

VrPpIpxPStatsEntry  
SEQUENCE    
  vrPpIpxPStateChanges Counter32
  vrPpIpxPInReceives Counter32
  vrPpIpxPForwarded Counter32

VrPpIpxPRipPRowStatusEntry  
SEQUENCE    
  vrPpIpxPRipPRowStatus RowStatus
  vrPpIpxPRipPComponentName DisplayString
  vrPpIpxPRipPStorageType StorageType
  vrPpIpxPRipPIndex NonReplicated

VrPpIpxPRipPStatsEntry  
SEQUENCE    
  vrPpIpxPRipPInPackets Counter32
  vrPpIpxPRipPInRequests Counter32
  vrPpIpxPRipPInResponses Counter32
  vrPpIpxPRipPOutPackets Counter32
  vrPpIpxPRipPOutRequests Counter32
  vrPpIpxPRipPOutResponses Counter32
  vrPpIpxPRipPIncorrectPackets Counter32

VrPpIpxPSapPRowStatusEntry  
SEQUENCE    
  vrPpIpxPSapPRowStatus RowStatus
  vrPpIpxPSapPComponentName DisplayString
  vrPpIpxPSapPStorageType StorageType
  vrPpIpxPSapPIndex NonReplicated

VrPpIpxPSapPStatsEntry  
SEQUENCE    
  vrPpIpxPSapPInPackets Counter32
  vrPpIpxPSapPInRequests Counter32
  vrPpIpxPSapPInResponses Counter32
  vrPpIpxPSapPOutPackets Counter32
  vrPpIpxPSapPOutRequests Counter32
  vrPpIpxPSapPOutResponses Counter32
  vrPpIpxPSapPIncorrectPackets Counter32

VrPpIpxPIWPRowStatusEntry  
SEQUENCE    
  vrPpIpxPIWPRowStatus RowStatus
  vrPpIpxPIWPComponentName DisplayString
  vrPpIpxPIWPStorageType StorageType
  vrPpIpxPIWPRemoteStationIdentifierIndex DashedHexString

VrPpIpxPIWPOperEntry  
SEQUENCE    
  vrPpIpxPIWPNeighbourRouterName AsciiString
  vrPpIpxPIWPNeighbourInternalNetworkNumber DashedHexString
  vrPpIpxPIWPInitFails Counter32

VrPpIpxPNetSentryPRowStatusEntry  
SEQUENCE    
  vrPpIpxPNetSentryPRowStatus RowStatus
  vrPpIpxPNetSentryPComponentName DisplayString
  vrPpIpxPNetSentryPStorageType StorageType
  vrPpIpxPNetSentryPIndex NonReplicated

VrPpIpxPNetSentryPProvEntry  
SEQUENCE    
  vrPpIpxPNetSentryPInComingFilter AsciiString
  vrPpIpxPNetSentryPOutGoingFilter AsciiString

VrIpxRowStatusEntry  
SEQUENCE    
  vrIpxRowStatus RowStatus
  vrIpxComponentName DisplayString
  vrIpxStorageType StorageType
  vrIpxIndex NonReplicated

VrIpxAdminControlEntry  
SEQUENCE    
  vrIpxSnmpAdminStatus INTEGER

VrIpxProvEntry  
SEQUENCE    
  vrIpxNetworkNumber DashedHexString
  vrIpxMaxPathSplits Unsigned32
  vrIpxMaxHops Unsigned32
  vrIpxRipUpdateInterval Unsigned32
  vrIpxSapUpdateInterval Unsigned32
  vrIpxControlDelay Unsigned32
  vrIpxUpdateDelay Unsigned32
  vrIpxRipAgeMultiplier Unsigned32
  vrIpxSapAgeMultiplier Unsigned32
  vrIpxDamping INTEGER
  vrIpxRipMaxDampedGeneralRequests Unsigned32
  vrIpxRipMaxDampedSpecificRequests Unsigned32
  vrIpxSapMaxDampedGeneralRequests Unsigned32
  vrIpxSapMaxDampedSpecificRequests Unsigned32
  vrIpxInitialGeneralRequests INTEGER
  vrIpxHoldDownInterval Unsigned32

VrIpxStateEntry  
SEQUENCE    
  vrIpxAdminState INTEGER
  vrIpxOperationalState INTEGER
  vrIpxUsageState INTEGER

VrIpxOperStatusEntry  
SEQUENCE    
  vrIpxSnmpOperStatus INTEGER

VrIpxOperEntry  
SEQUENCE    
  vrIpxProtocolPortCount Unsigned32
  vrIpxDestinationCount Unsigned32
  vrIpxServicesCount Unsigned32

VrIpxStatsEntry  
SEQUENCE    
  vrIpxInReceives Counter32
  vrIpxInHeaderErrors Counter32
  vrIpxInUnknownSocket Counter32
  vrIpxInDiscards Counter32
  vrIpxInBadChecksums Counter32
  vrIpxInDelivers Counter32
  vrIpxNoRoutes Counter32
  vrIpxOutRequests Counter32
  vrIpxOutMalformedRequests Counter32
  vrIpxOutDiscards Counter32
  vrIpxOutPackets Counter32
  vrIpxInTooManyHops Counter32
  vrIpxInFiltered Counter32
  vrIpxInNetBIOS Counter32
  vrIpxForwarded Counter32
  vrIpxOutFiltered Counter32

VrIpxRipRowStatusEntry  
SEQUENCE    
  vrIpxRipRowStatus RowStatus
  vrIpxRipComponentName DisplayString
  vrIpxRipStorageType StorageType
  vrIpxRipIndex NonReplicated

VrIpxRipStatsEntry  
SEQUENCE    
  vrIpxRipRipIn Counter32
  vrIpxRipRipOut Counter32
  vrIpxRipRipIncorrectPackets Counter32

VrIpxRipRFltrRowStatusEntry  
SEQUENCE    
  vrIpxRipRFltrRowStatus RowStatus
  vrIpxRipRFltrComponentName DisplayString
  vrIpxRipRFltrStorageType StorageType
  vrIpxRipRFltrIdentifierIndex Integer32

VrIpxRipRFltrProvEntry  
SEQUENCE    
  vrIpxRipRFltrHops AsciiString
  vrIpxRipRFltrTicks AsciiString
  vrIpxRipRFltrNetworkNumber AsciiString
  vrIpxRipRFltrNode AsciiString
  vrIpxRipRFltrPort AsciiString
  vrIpxRipRFltrDisposition INTEGER

VrIpxRipRFltrOperEntry  
SEQUENCE    
  vrIpxRipRFltrNumberOfApplyEntries Gauge32

VrIpxRipRipAppRowStatusEntry  
SEQUENCE    
  vrIpxRipRipAppRowStatus RowStatus
  vrIpxRipRipAppComponentName DisplayString
  vrIpxRipRipAppStorageType StorageType
  vrIpxRipRipAppProtocolPortNameIndex AsciiStringIndex
  vrIpxRipRipAppFilterIdentifierIndex Integer32

VrIpxRipRipAppProvEntry  
SEQUENCE    
  vrIpxRipRipAppDirection INTEGER

VrIpxSapRowStatusEntry  
SEQUENCE    
  vrIpxSapRowStatus RowStatus
  vrIpxSapComponentName DisplayString
  vrIpxSapStorageType StorageType
  vrIpxSapIndex NonReplicated

VrIpxSapStatsEntry  
SEQUENCE    
  vrIpxSapSapIn Counter32
  vrIpxSapSapOut Counter32
  vrIpxSapSapIncorrectPackets Counter32

VrIpxSapSFltrRowStatusEntry  
SEQUENCE    
  vrIpxSapSFltrRowStatus RowStatus
  vrIpxSapSFltrComponentName DisplayString
  vrIpxSapSFltrStorageType StorageType
  vrIpxSapSFltrIdentifierIndex Integer32

VrIpxSapSFltrProvEntry  
SEQUENCE    
  vrIpxSapSFltrType AsciiString
  vrIpxSapSFltrName AsciiString
  vrIpxSapSFltrNetworkNumber AsciiString
  vrIpxSapSFltrNode AsciiString
  vrIpxSapSFltrDisposition INTEGER

VrIpxSapSFltrOperEntry  
SEQUENCE    
  vrIpxSapSFltrNumberOfApplyEntries Gauge32

VrIpxSapSapAppRowStatusEntry  
SEQUENCE    
  vrIpxSapSapAppRowStatus RowStatus
  vrIpxSapSapAppComponentName DisplayString
  vrIpxSapSapAppStorageType StorageType
  vrIpxSapSapAppProtocolPortNameIndex AsciiStringIndex
  vrIpxSapSapAppFilterIdentifierIndex Integer32

VrIpxSapSapAppProvEntry  
SEQUENCE    
  vrIpxSapSapAppDirection INTEGER

VrIpxFwdRowStatusEntry  
SEQUENCE    
  vrIpxFwdRowStatus RowStatus
  vrIpxFwdComponentName DisplayString
  vrIpxFwdStorageType StorageType
  vrIpxFwdNetworkNumberIndex DashedHexString

VrIpxFwdOperEntry  
SEQUENCE    
  vrIpxFwdProtocol INTEGER
  vrIpxFwdTicks Unsigned32
  vrIpxFwdHopCount Gauge32
  vrIpxFwdProtocolPortId AsciiString
  vrIpxFwdNextHopPhysAddress PhysAddress
  vrIpxFwdNextHopNetworkNumber DashedHexString

VrIpxSrvcRowStatusEntry  
SEQUENCE    
  vrIpxSrvcRowStatus RowStatus
  vrIpxSrvcComponentName DisplayString
  vrIpxSrvcStorageType StorageType
  vrIpxSrvcNetworkNumberIndex DashedHexString
  vrIpxSrvcNodeIndex DashedHexString
  vrIpxSrvcTypeIndex Integer32
  vrIpxSrvcNameIndex AsciiStringIndex

VrIpxSrvcOperEntry  
SEQUENCE    
  vrIpxSrvcSocket Hex
  vrIpxSrvcProtocol INTEGER
  vrIpxSrvcHopCount Gauge32

VrIpxAdjRowStatusEntry  
SEQUENCE    
  vrIpxAdjRowStatus RowStatus
  vrIpxAdjComponentName DisplayString
  vrIpxAdjStorageType StorageType
  vrIpxAdjProtocolPortIdentifierIndex AsciiStringIndex
  vrIpxAdjNetworkNumberIndex DashedHexString

VrIpxAdjOperEntry  
SEQUENCE    
  vrIpxAdjPhysAddress PhysAddress
  vrIpxAdjAdjacencyState INTEGER

VrIpxNsRowStatusEntry  
SEQUENCE    
  vrIpxNsRowStatus RowStatus
  vrIpxNsComponentName DisplayString
  vrIpxNsStorageType StorageType
  vrIpxNsIndex NonReplicated

VrIpxNsProvEntry  
SEQUENCE    
  vrIpxNsFirstFilter AsciiString
  vrIpxNsLastFilter AsciiString
  vrIpxNsLocalInFilter AsciiString
  vrIpxNsLocalOutFilter AsciiString

VrIpxNsNetSentryAppRowStatusEntry  
SEQUENCE    
  vrIpxNsNetSentryAppRowStatus RowStatus
  vrIpxNsNetSentryAppComponentName DisplayString
  vrIpxNsNetSentryAppStorageType StorageType
  vrIpxNsNetSentryAppEntryIndex Integer32

VrIpxNsNetSentryAppProvEntry  
SEQUENCE    
  vrIpxNsNetSentryAppFilter AsciiString
  vrIpxNsNetSentryAppNetworkNumber1 AsciiString
  vrIpxNsNetSentryAppNode1 AsciiString
  vrIpxNsNetSentryAppDirection INTEGER
  vrIpxNsNetSentryAppNetworkNumber2 AsciiString
  vrIpxNsNetSentryAppNode2 AsciiString

Defined Values

ipxMIB 1.3.6.1.4.1.562.2.4.2.28
OBJECT IDENTIFIER    

vrPpIpxP 1.3.6.1.4.1.562.2.4.1.100.3.6
OBJECT IDENTIFIER    

vrPpIpxPRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.6.1
This entry controls the addition and deletion of vrPpIpxP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPRowStatusEntry

vrPpIpxPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.1.1
A single entry in the table represents a single vrPpIpxP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPRowStatusEntry  

vrPpIpxPRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.6.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpxP components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpxPComponentName 1.3.6.1.4.1.562.2.4.1.100.3.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpxPStorageType 1.3.6.1.4.1.562.2.4.1.100.3.6.1.1.4
This variable represents the storage type value for the vrPpIpxP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpxPIndex 1.3.6.1.4.1.562.2.4.1.100.3.6.1.1.10
This variable represents the index for the vrPpIpxP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER link(1), ethernet(2), novell(3), sap(4), snap(5), vns(6), tunnel(7)  

vrPpIpxPAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.3.6.100
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPAdminControlEntry

vrPpIpxPAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.100.1
An entry in the vrPpIpxPAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPAdminControlEntry  

vrPpIpxPSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.3.6.100.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrPpIpxPProvTable 1.3.6.1.4.1.562.2.4.1.100.3.6.101
The Provisionable group for the IpxPort component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPProvEntry

vrPpIpxPProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.101.1
An entry in the vrPpIpxPProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPProvEntry  

vrPpIpxPNetworkNumberProv 1.3.6.1.4.1.562.2.4.1.100.3.6.101.1.1
The Ipx network number of the network directly connected to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DashedHexString Size(0..4)  

vrPpIpxPDefaultType 1.3.6.1.4.1.562.2.4.1.100.3.6.101.1.2
This attribute indicates which protocol is to run on a protocol port. In the case of a lan media it is to be set to broadcast. In the case of WAN media the following choices are to be exercised: For running Pre-IPXWAN RIP set value to other. For running numbered RIP set value to wanRip. For running un-numbered RIP set value to unnumberedRip. Setting this value to ppp will signify unnumbered Rip running on a ppp port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), broadcast(2), ppp(3), wanRip(4), unnumberedRip(5)  

vrPpIpxPBroadcastInhibit 1.3.6.1.4.1.562.2.4.1.100.3.6.101.1.3
If this attribute is set, all outgoing periodic and triggered updates for RIP and SAP will be inhibited for the port. However the port will still accept incoming RIP and SAP packets on the port. This may be useful for ports with only a bank of servers on its network in order to limit the routing traffic, assuming that servers don't require routing information or other server information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrPpIpxPSresProvTable 1.3.6.1.4.1.562.2.4.1.100.3.6.102
This group contains the provisioned attributes for SourceRouteEndStation support.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPSresProvEntry

vrPpIpxPSresProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.102.1
An entry in the vrPpIpxPSresProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPSresProvEntry  

vrPpIpxPSourceRouteEndStationSupport 1.3.6.1.4.1.562.2.4.1.100.3.6.102.1.1
This attribute is used to enable or disable support for SourceRouteEndStation (Sres). If set to enable, Sres will be supported on this protocol on this ProtocolPort (Pp). If set to disable, it will not be supported. An Sres component must be provisioned under the VirtualRouter if this attribute is set to enable. If this attribute is set to enable and this Pp has its linkToMedia attribute set, it must be linked to a LanApplication (La) that has its Framer interfaceName linked to a Fddi or TokenRing component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vrPpIpxPStateTable 1.3.6.1.4.1.562.2.4.1.100.3.6.103
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPStateEntry

vrPpIpxPStateEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.103.1
An entry in the vrPpIpxPStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPStateEntry  

vrPpIpxPAdminState 1.3.6.1.4.1.562.2.4.1.100.3.6.103.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrPpIpxPOperationalState 1.3.6.1.4.1.562.2.4.1.100.3.6.103.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrPpIpxPUsageState 1.3.6.1.4.1.562.2.4.1.100.3.6.103.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrPpIpxPOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.6.104
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPOperStatusEntry

vrPpIpxPOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.104.1
An entry in the vrPpIpxPOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPOperStatusEntry  

vrPpIpxPSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.3.6.104.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrPpIpxPOperTable 1.3.6.1.4.1.562.2.4.1.100.3.6.105
The IpxPort Operational Attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPOperEntry

vrPpIpxPOperEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.105.1
An entry in the vrPpIpxPOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPOperEntry  

vrPpIpxPType 1.3.6.1.4.1.562.2.4.1.100.3.6.105.1.1
The type of the circuit. This would differ from the provisioned type when a different routing protocol is negotiated with the peer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), broadcast(2), ppp(3), wanRip(4), unnumberedRip(5)  

vrPpIpxPEncapsulation 1.3.6.1.4.1.562.2.4.1.100.3.6.105.1.2
Packet encapsulation type that the router has determined to use on the port. There are seven encapsulation types used to identify IPX datagram as listed below. 1. link: IPX encapsulation type for PPP, ATM MPE, and X25DTE media types. 2. ethernet: IPX encapsulation type for Ethernet and FrDte media types. 3. novell: IPX encapsulation type for Ethernet and FrDte media types. 4. sap: IPX encapsulation type for FDDI, Token Ring, Ethernet and FrDte media types. 5. snap: IPX encapsulation type for FDDI, Token Ring, Ethernet, and FrDte media types. 6. vns: IPX encapsulation type for VNS media type. 7. tunnel: IPX encapsulation type for Tunnel media type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER link(1), ethernet(2), novell(3), sap(4), snap(5), vns(6), tunnel(7)  

vrPpIpxPNetworkNumber 1.3.6.1.4.1.562.2.4.1.100.3.6.105.1.3
The Ipx network number from the provisioned networkNumberProv value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DashedHexString Size(0..4)  

vrPpIpxPNode 1.3.6.1.4.1.562.2.4.1.100.3.6.105.1.4
The Ipx node address of this IpxPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DashedHexString Size(1..6)  

vrPpIpxPStatsTable 1.3.6.1.4.1.562.2.4.1.100.3.6.106
The IpxPort Statistics group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPStatsEntry

vrPpIpxPStatsEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.106.1
An entry in the vrPpIpxPStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPStatsEntry  

vrPpIpxPStateChanges 1.3.6.1.4.1.562.2.4.1.100.3.6.106.1.1
Number of times the port has changed state. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPInReceives 1.3.6.1.4.1.562.2.4.1.100.3.6.106.1.2
Total number of packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPForwarded 1.3.6.1.4.1.562.2.4.1.100.3.6.106.1.3
Number of packets forwarded. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPRipP 1.3.6.1.4.1.562.2.4.1.100.3.6.2
OBJECT IDENTIFIER    

vrPpIpxPRipPRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.6.2.1
This entry controls the addition and deletion of vrPpIpxPRipP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPRipPRowStatusEntry

vrPpIpxPRipPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.2.1.1
A single entry in the table represents a single vrPpIpxPRipP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPRipPRowStatusEntry  

vrPpIpxPRipPRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.6.2.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpxPRipP components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrPpIpxPRipPComponentName 1.3.6.1.4.1.562.2.4.1.100.3.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpxPRipPStorageType 1.3.6.1.4.1.562.2.4.1.100.3.6.2.1.1.4
This variable represents the storage type value for the vrPpIpxPRipP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpxPRipPIndex 1.3.6.1.4.1.562.2.4.1.100.3.6.2.1.1.10
This variable represents the index for the vrPpIpxPRipP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrPpIpxPRipPStatsTable 1.3.6.1.4.1.562.2.4.1.100.3.6.2.10
RIP specific statistics for this IpxPort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPRipPStatsEntry

vrPpIpxPRipPStatsEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.2.10.1
An entry in the vrPpIpxPRipPStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPRipPStatsEntry  

vrPpIpxPRipPInPackets 1.3.6.1.4.1.562.2.4.1.100.3.6.2.10.1.1
The number of RIP packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPRipPInRequests 1.3.6.1.4.1.562.2.4.1.100.3.6.2.10.1.2
The number of RIP request packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPRipPInResponses 1.3.6.1.4.1.562.2.4.1.100.3.6.2.10.1.3
The number of RIP response packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPRipPOutPackets 1.3.6.1.4.1.562.2.4.1.100.3.6.2.10.1.4
The number of RIP packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPRipPOutRequests 1.3.6.1.4.1.562.2.4.1.100.3.6.2.10.1.5
The number of RIP request packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPRipPOutResponses 1.3.6.1.4.1.562.2.4.1.100.3.6.2.10.1.6
The number of RIP response packets sent out on this IpxPort. This includes RIP periodic update packets. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPRipPIncorrectPackets 1.3.6.1.4.1.562.2.4.1.100.3.6.2.10.1.7
Number of times that an incorrectly formatted RIP packet was received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPSapP 1.3.6.1.4.1.562.2.4.1.100.3.6.3
OBJECT IDENTIFIER    

vrPpIpxPSapPRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.6.3.1
This entry controls the addition and deletion of vrPpIpxPSapP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPSapPRowStatusEntry

vrPpIpxPSapPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.3.1.1
A single entry in the table represents a single vrPpIpxPSapP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPSapPRowStatusEntry  

vrPpIpxPSapPRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.6.3.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpxPSapP components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrPpIpxPSapPComponentName 1.3.6.1.4.1.562.2.4.1.100.3.6.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpxPSapPStorageType 1.3.6.1.4.1.562.2.4.1.100.3.6.3.1.1.4
This variable represents the storage type value for the vrPpIpxPSapP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpxPSapPIndex 1.3.6.1.4.1.562.2.4.1.100.3.6.3.1.1.10
This variable represents the index for the vrPpIpxPSapP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrPpIpxPSapPStatsTable 1.3.6.1.4.1.562.2.4.1.100.3.6.3.10
SAP specific statistics for this IpxPort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPSapPStatsEntry

vrPpIpxPSapPStatsEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.3.10.1
An entry in the vrPpIpxPSapPStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPSapPStatsEntry  

vrPpIpxPSapPInPackets 1.3.6.1.4.1.562.2.4.1.100.3.6.3.10.1.1
The total number of SAP packets received on this IpxPort. Includes SAP requests and responses. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPSapPInRequests 1.3.6.1.4.1.562.2.4.1.100.3.6.3.10.1.2
The number of SAP Request packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPSapPInResponses 1.3.6.1.4.1.562.2.4.1.100.3.6.3.10.1.3
The number of SAP response packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPSapPOutPackets 1.3.6.1.4.1.562.2.4.1.100.3.6.3.10.1.4
The total number of SAP packets sent out this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPSapPOutRequests 1.3.6.1.4.1.562.2.4.1.100.3.6.3.10.1.5
The number of SAP request packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPSapPOutResponses 1.3.6.1.4.1.562.2.4.1.100.3.6.3.10.1.6
The number of SAP response packets sent out this IpxPort. This includes periodic SAP update packets. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPSapPIncorrectPackets 1.3.6.1.4.1.562.2.4.1.100.3.6.3.10.1.7
Number of times an incorrectly formatted SAP packet was received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPIWP 1.3.6.1.4.1.562.2.4.1.100.3.6.4
OBJECT IDENTIFIER    

vrPpIpxPIWPRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.6.4.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrPpIpxPIWP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPIWPRowStatusEntry

vrPpIpxPIWPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.4.1.1
A single entry in the table represents a single vrPpIpxPIWP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPIWPRowStatusEntry  

vrPpIpxPIWPRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.6.4.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpxPIWP components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrPpIpxPIWPComponentName 1.3.6.1.4.1.562.2.4.1.100.3.6.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpxPIWPStorageType 1.3.6.1.4.1.562.2.4.1.100.3.6.4.1.1.4
This variable represents the storage type value for the vrPpIpxPIWP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpxPIWPRemoteStationIdentifierIndex 1.3.6.1.4.1.562.2.4.1.100.3.6.4.1.1.10
This variable represents the index for the vrPpIpxPIWP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DashedHexString Size(1..8)  

vrPpIpxPIWPOperTable 1.3.6.1.4.1.562.2.4.1.100.3.6.4.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains operational attributes that are specific for the IPXWAN protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPIWPOperEntry

vrPpIpxPIWPOperEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.4.10.1
An entry in the vrPpIpxPIWPOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPIWPOperEntry  

vrPpIpxPIWPNeighbourRouterName 1.3.6.1.4.1.562.2.4.1.100.3.6.4.10.1.1
The name of the neighboring router on a WAN circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..48)  

vrPpIpxPIWPNeighbourInternalNetworkNumber 1.3.6.1.4.1.562.2.4.1.100.3.6.4.10.1.2
The internal network number of the neighboring router on a WAN circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DashedHexString Size(1..4)  

vrPpIpxPIWPInitFails 1.3.6.1.4.1.562.2.4.1.100.3.6.4.10.1.3
The number of times initialization has failed on this circuit. This counter wraps around to zero after reaching the maximum value of 4294967295
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrPpIpxPNetSentryP 1.3.6.1.4.1.562.2.4.1.100.3.6.5
OBJECT IDENTIFIER    

vrPpIpxPNetSentryPRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.6.5.1
This entry controls the addition and deletion of vrPpIpxPNetSentryP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPNetSentryPRowStatusEntry

vrPpIpxPNetSentryPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.5.1.1
A single entry in the table represents a single vrPpIpxPNetSentryP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPNetSentryPRowStatusEntry  

vrPpIpxPNetSentryPRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.6.5.1.1.1
This variable is used as the basis for SNMP naming of vrPpIpxPNetSentryP components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpIpxPNetSentryPComponentName 1.3.6.1.4.1.562.2.4.1.100.3.6.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpIpxPNetSentryPStorageType 1.3.6.1.4.1.562.2.4.1.100.3.6.5.1.1.4
This variable represents the storage type value for the vrPpIpxPNetSentryP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIpxPNetSentryPIndex 1.3.6.1.4.1.562.2.4.1.100.3.6.5.1.1.10
This variable represents the index for the vrPpIpxPNetSentryP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrPpIpxPNetSentryPProvTable 1.3.6.1.4.1.562.2.4.1.100.3.6.5.10
This group contains the NetSentry attributes that specify the names of the NetSentry filters which will be applied to IPX packets as incoming and outgoing filters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpIpxPNetSentryPProvEntry

vrPpIpxPNetSentryPProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.6.5.10.1
An entry in the vrPpIpxPNetSentryPProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpIpxPNetSentryPProvEntry  

vrPpIpxPNetSentryPInComingFilter 1.3.6.1.4.1.562.2.4.1.100.3.6.5.10.1.1
This attribute specifies the name of the NetSentry filter applied to incoming IPX packets on this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrPpIpxPNetSentryPOutGoingFilter 1.3.6.1.4.1.562.2.4.1.100.3.6.5.10.1.2
The name of the filter applied to outgoing IPX packets on this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrIpx 1.3.6.1.4.1.562.2.4.1.100.7
OBJECT IDENTIFIER    

vrIpxRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.1
This entry controls the addition and deletion of vrIpx components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxRowStatusEntry

vrIpxRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.1.1
A single entry in the table represents a single vrIpx component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxRowStatusEntry  

vrIpxRowStatus 1.3.6.1.4.1.562.2.4.1.100.7.1.1.1
This variable is used as the basis for SNMP naming of vrIpx components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpxComponentName 1.3.6.1.4.1.562.2.4.1.100.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpxStorageType 1.3.6.1.4.1.562.2.4.1.100.7.1.1.4
This variable represents the storage type value for the vrIpx tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpxIndex 1.3.6.1.4.1.562.2.4.1.100.7.1.1.10
This variable represents the index for the vrIpx tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpxAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.7.100
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxAdminControlEntry

vrIpxAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.7.100.1
An entry in the vrIpxAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxAdminControlEntry  

vrIpxSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.7.100.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpxProvTable 1.3.6.1.4.1.562.2.4.1.100.7.101
IPX system provisionable attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxProvEntry

vrIpxProvEntry 1.3.6.1.4.1.562.2.4.1.100.7.101.1
An entry in the vrIpxProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxProvEntry  

vrIpxNetworkNumber 1.3.6.1.4.1.562.2.4.1.100.7.101.1.1
This attribute indicates the internal network number portion of the IPX address. This network number must be unique within the internetwork and is necessary to determine master/slave relationships during IPXWAN negotiations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DashedHexString Size(1..4)  

vrIpxMaxPathSplits 1.3.6.1.4.1.562.2.4.1.100.7.101.1.2
This attribute indicates the maximum number of paths with equal routing metric value which this instance of IPX may split between when forwarding packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4  

vrIpxMaxHops 1.3.6.1.4.1.562.2.4.1.100.7.101.1.3
This attribute indicates the maximum number of hops a packet may take.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..64  

vrIpxRipUpdateInterval 1.3.6.1.4.1.562.2.4.1.100.7.101.1.4
The RIP periodic update interval, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

vrIpxSapUpdateInterval 1.3.6.1.4.1.562.2.4.1.100.7.101.1.5
The SAP periodic update interval, in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

vrIpxControlDelay 1.3.6.1.4.1.562.2.4.1.100.7.101.1.6
The delay, in microsecs, between receiving a request from a client and sending a response. This router is significantly faster than some Ipx clients. If a problem is being experienced between a router and an Ipx client, it might be resolved by changing the controlDelay.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30  

vrIpxUpdateDelay 1.3.6.1.4.1.562.2.4.1.100.7.101.1.7
The delay, in milliseconds, between sending consecutive (RIP and/or SAP) packets. 55 milliseconds is the minimum specified in the Ipx Router Specification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 55..500  

vrIpxRipAgeMultiplier 1.3.6.1.4.1.562.2.4.1.100.7.101.1.8
After this many Rip Update intervals unrefreshed Rip information is considered expired.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

vrIpxSapAgeMultiplier 1.3.6.1.4.1.562.2.4.1.100.7.101.1.9
After this many SAP Update intervals unrefreshed SAP information is considered expired.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

vrIpxDamping 1.3.6.1.4.1.562.2.4.1.100.7.101.1.10
This attribute specifies whether damping is applied. Damping refers to the damping of incoming RIP and SAP requests. It handles cases where a rogue client or server is making an extraodinary number of requests. With damping set to disabled, the switch will reply to all requests with no check for rogue nodes.With damping set to enabled, the switch will not reply to a request if the same node made more than the allowable number of requests within 10 seconds. The maximum number of requests to damp at is specified by the following provisionable attributes: ripMaxDampedGeneralRequest, ripMaxDampedSpecificRequests, sapMaxDampedGeneralRequests, sapMaxDampedSpecificRequests.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpxRipMaxDampedGeneralRequests 1.3.6.1.4.1.562.2.4.1.100.7.101.1.11
This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to general RIP requests. If more than this number are received within a ten second interval, the first ripMaxDampedGeneralRequests are responded to and the remainder are ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

vrIpxRipMaxDampedSpecificRequests 1.3.6.1.4.1.562.2.4.1.100.7.101.1.12
This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to specific RIP requests. If more than this number are received within a ten second interval, the first ripMaxDampedSpecificRequests are responded to and the remainder are ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

vrIpxSapMaxDampedGeneralRequests 1.3.6.1.4.1.562.2.4.1.100.7.101.1.13
This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to general SAP requests. If more than this number are received within a ten second interval, the first sapMaxDampedGeneralRequests are responded to and the remainder are ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

vrIpxSapMaxDampedSpecificRequests 1.3.6.1.4.1.562.2.4.1.100.7.101.1.14
This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to specific SAP requests. If more than this number are received within a ten second interval, the first sapMaxDampedSpecificRequests are responded to and the remainder are ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

vrIpxInitialGeneralRequests 1.3.6.1.4.1.562.2.4.1.100.7.101.1.15
This attribute specifies whether the RIP and SAP general requests are sent out a port when the port first comes up. If this attribute is enabled the initial requests will be made; whereas if the attribute is disabled the initial requests will not be made. This attribute may be disabled in order to avoid the traffic resulting within the network from these initial requests and the ensuing responses. With the initial request disabled, the switch will learn about other network segments off of the IPX ports via the periodic broadcasts which are received on those port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpxHoldDownInterval 1.3.6.1.4.1.562.2.4.1.100.7.101.1.16
This attribute specifies an interval, after a network is removed from the route table, during which other incoming route updates for the same network will be ignored. The use of this interval prevents the slow convergence which results when switches that receive late network down broadcasts advertise false routes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

vrIpxStateTable 1.3.6.1.4.1.562.2.4.1.100.7.103
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxStateEntry

vrIpxStateEntry 1.3.6.1.4.1.562.2.4.1.100.7.103.1
An entry in the vrIpxStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxStateEntry  

vrIpxAdminState 1.3.6.1.4.1.562.2.4.1.100.7.103.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrIpxOperationalState 1.3.6.1.4.1.562.2.4.1.100.7.103.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrIpxUsageState 1.3.6.1.4.1.562.2.4.1.100.7.103.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIpxOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.104
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxOperStatusEntry

vrIpxOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.104.1
An entry in the vrIpxOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxOperStatusEntry  

vrIpxSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.7.104.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIpxOperTable 1.3.6.1.4.1.562.2.4.1.100.7.105
This group contains IPX related operational attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxOperEntry

vrIpxOperEntry 1.3.6.1.4.1.562.2.4.1.100.7.105.1
An entry in the vrIpxOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxOperEntry  

vrIpxProtocolPortCount 1.3.6.1.4.1.562.2.4.1.100.7.105.1.1
The number of portsknown to this instance of Ipx.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vrIpxDestinationCount 1.3.6.1.4.1.562.2.4.1.100.7.105.1.2
The number of currently reachable destinations known to Ipx.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

vrIpxServicesCount 1.3.6.1.4.1.562.2.4.1.100.7.105.1.3
The number of Services known to Ipx.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

vrIpxStatsTable 1.3.6.1.4.1.562.2.4.1.100.7.107
This group contains IPX related statistics on the CP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxStatsEntry

vrIpxStatsEntry 1.3.6.1.4.1.562.2.4.1.100.7.107.1
An entry in the vrIpxStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxStatsEntry  

vrIpxInReceives 1.3.6.1.4.1.562.2.4.1.100.7.107.1.1
This attribute counts the total number of IPX packets received, including those received in error. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxInHeaderErrors 1.3.6.1.4.1.562.2.4.1.100.7.107.1.2
The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxInUnknownSocket 1.3.6.1.4.1.562.2.4.1.100.7.107.1.3
The number of IPX packets discarded because the destination socket was not open. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxInDiscards 1.3.6.1.4.1.562.2.4.1.100.7.107.1.4
Number of packets received but discarded due to reasons other than those accounted for by inHeaderErrors and inUnknownSocket. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxInBadChecksums 1.3.6.1.4.1.562.2.4.1.100.7.107.1.5
Number of packets received with incorrect checksums. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxInDelivers 1.3.6.1.4.1.562.2.4.1.100.7.107.1.6
Number of IPX packets delivered locally, including packets from local applications. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxNoRoutes 1.3.6.1.4.1.562.2.4.1.100.7.107.1.7
Number of times no route to a destination was found. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxOutRequests 1.3.6.1.4.1.562.2.4.1.100.7.107.1.8
The number of IPX packets supplied locally for transmission, not including any packets counted in the forwarded attribute. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxOutMalformedRequests 1.3.6.1.4.1.562.2.4.1.100.7.107.1.9
Number of outgoing packets supplied locally that contained errors in their structure. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxOutDiscards 1.3.6.1.4.1.562.2.4.1.100.7.107.1.10
The number of outgoing IPX packets discarded due to reasons other than those accounted for in outMalformedRequests or outFiltered. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxOutPackets 1.3.6.1.4.1.562.2.4.1.100.7.107.1.11
The total number of IPX packets transmitted. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxInTooManyHops 1.3.6.1.4.1.562.2.4.1.100.7.107.1.12
Number of packets discarded due to exceeding the maxHops value. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxInFiltered 1.3.6.1.4.1.562.2.4.1.100.7.107.1.13
The number of incoming IPX packets discarded due to filtering. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxInNetBIOS 1.3.6.1.4.1.562.2.4.1.100.7.107.1.14
The number of NetBIOS packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxForwarded 1.3.6.1.4.1.562.2.4.1.100.7.107.1.15
The number of IPX packets forwarded. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxOutFiltered 1.3.6.1.4.1.562.2.4.1.100.7.107.1.16
The number of outgoing packets discarded due to filtering. This also includes the number of forwarded packets filtered. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxRip 1.3.6.1.4.1.562.2.4.1.100.7.2
OBJECT IDENTIFIER    

vrIpxRipRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.2.1
This entry controls the addition and deletion of vrIpxRip components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxRipRowStatusEntry

vrIpxRipRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.2.1.1
A single entry in the table represents a single vrIpxRip component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxRipRowStatusEntry  

vrIpxRipRowStatus 1.3.6.1.4.1.562.2.4.1.100.7.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpxRip components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpxRipComponentName 1.3.6.1.4.1.562.2.4.1.100.7.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpxRipStorageType 1.3.6.1.4.1.562.2.4.1.100.7.2.1.1.4
This variable represents the storage type value for the vrIpxRip tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpxRipIndex 1.3.6.1.4.1.562.2.4.1.100.7.2.1.1.10
This variable represents the index for the vrIpxRip tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpxRipStatsTable 1.3.6.1.4.1.562.2.4.1.100.7.2.10
IPX statistics related to the RIP protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxRipStatsEntry

vrIpxRipStatsEntry 1.3.6.1.4.1.562.2.4.1.100.7.2.10.1
An entry in the vrIpxRipStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxRipStatsEntry  

vrIpxRipRipIn 1.3.6.1.4.1.562.2.4.1.100.7.2.10.1.1
This attribute counts the total number of IPX RIP packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxRipRipOut 1.3.6.1.4.1.562.2.4.1.100.7.2.10.1.2
This attribute counts the total number of RIP packets locally generated and sent out. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxRipRipIncorrectPackets 1.3.6.1.4.1.562.2.4.1.100.7.2.10.1.3
This attribute counts the number of times an incorrectly formatted RIP packet was received. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxRipRFltr 1.3.6.1.4.1.562.2.4.1.100.7.2.2
OBJECT IDENTIFIER    

vrIpxRipRFltrRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.2.2.1
This entry controls the addition and deletion of vrIpxRipRFltr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxRipRFltrRowStatusEntry

vrIpxRipRFltrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.2.2.1.1
A single entry in the table represents a single vrIpxRipRFltr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxRipRFltrRowStatusEntry  

vrIpxRipRFltrRowStatus 1.3.6.1.4.1.562.2.4.1.100.7.2.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpxRipRFltr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpxRipRFltrComponentName 1.3.6.1.4.1.562.2.4.1.100.7.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpxRipRFltrStorageType 1.3.6.1.4.1.562.2.4.1.100.7.2.2.1.1.4
This variable represents the storage type value for the vrIpxRipRFltr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpxRipRFltrIdentifierIndex 1.3.6.1.4.1.562.2.4.1.100.7.2.2.1.1.10
This variable represents the index for the vrIpxRipRFltr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..268435455  

vrIpxRipRFltrProvTable 1.3.6.1.4.1.562.2.4.1.100.7.2.2.10
This is the provisionable attribute group for RipFilter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxRipRFltrProvEntry

vrIpxRipRFltrProvEntry 1.3.6.1.4.1.562.2.4.1.100.7.2.2.10.1
An entry in the vrIpxRipRFltrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxRipRFltrProvEntry  

vrIpxRipRFltrHops 1.3.6.1.4.1.562.2.4.1.100.7.2.2.10.1.1
This attribute specifies the distance in terms of number of hops. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A hops value preceded by an equality operator(=), less than operator(<) or greater than operator(>) should be interpreted as matching all RIP packet tuples which are an equal, smaller or greater distance, respectively, away from the switch than the hops value specified. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter. The number of hops is specified as a decimal number between 0 and 999.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..4)  

vrIpxRipRFltrTicks 1.3.6.1.4.1.562.2.4.1.100.7.2.2.10.1.2
This attribute specifies the distance in terms of delay in ticks. A tick is 1/ 18 of a second. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A ticks value preceded by a equality operator(=), less than operator(<) or greater than operator(>) should be interpreted as matching all RIP packet tuples which are an equal, greater or lower delay, respectively, away from the switch than the ticks value specified. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter. The ticks value is specified as a decimal number between 0 and 999.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..4)  

vrIpxRipRFltrNetworkNumber 1.3.6.1.4.1.562.2.4.1.100.7.2.2.10.1.3
This attribute specifies the network number of matching networks in RIP packets to be filtered or passed depending on the disposition of the filter. The network number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 8 digits; in addition to hex digits, use of the character '?' to indicate wildcarding is allowed. (For example a valid network number would be ff-ff-ff-?? or ffffff??). Wildcard characters may be used only in pairs to replace a pair of hex digits. Filters with a network number preceded by a caret (^) should be interpreted as matching all RIP packet tuples except for the tuples with this network number. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..12)  

vrIpxRipRFltrNode 1.3.6.1.4.1.562.2.4.1.100.7.2.2.10.1.4
This attribute specifies the node portion in the source IPX address (that is, the MAC address or circuit ID) of received RIP packets for which the contained network tuples should be filtered or passed depending on the disposition of the filter. This attribute is only valid for filters applied to a port in the input direction and will be ignored if the filter is applied in the output direction.The node number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 12 digits; in addition to hex digits, use of the character '?' to indicate wildcarding is allowed. (For example a valid node number would be 00-20-??-??-??-?? or 0020???????? ). Wildcard characters may be used only in pairs to replace a pair of hex digits. A node number preceded by a caret (^) should be interpreted as matching all RIP packets' network tuples except for the RIP packets with this source node address. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..18)  

vrIpxRipRFltrPort 1.3.6.1.4.1.562.2.4.1.100.7.2.2.10.1.5
This attribute specifies the name of a protocol port whereby networks learned over this port are to be filtered or passed depending on the disposition of the filter. This attribute is only valid for filters applied to a port in the output direction and will be ignored if the filter is applied in the input direction. This attribute is entered as an ascii string and must correspond to a name of a provisioned protocol port. A port name preceded by a caret (^) should be interpreted as matching all RIP packet tuples except for those learned on this port. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..18)  

vrIpxRipRFltrDisposition 1.3.6.1.4.1.562.2.4.1.100.7.2.2.10.1.6
This attribute indicates a reversal of the filter pattern match. If the value is pass, then matching filters will cause the RIP packet tuple to be passed. If the value is filter, then matching filters will cause the RIP packet tuple to be filtered.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pass(1), filter(2)  

vrIpxRipRFltrOperTable 1.3.6.1.4.1.562.2.4.1.100.7.2.2.11
This is the operational attribute group for IpxRipFilter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxRipRFltrOperEntry

vrIpxRipRFltrOperEntry 1.3.6.1.4.1.562.2.4.1.100.7.2.2.11.1
An entry in the vrIpxRipRFltrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxRipRFltrOperEntry  

vrIpxRipRFltrNumberOfApplyEntries 1.3.6.1.4.1.562.2.4.1.100.7.2.2.11.1.1
This attribute indicates the number of times this filter is referenced by a RipApplyEntry. If zero, this filter is not applied on any ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrIpxRipRipApp 1.3.6.1.4.1.562.2.4.1.100.7.2.3
OBJECT IDENTIFIER    

vrIpxRipRipAppRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.2.3.1
This entry controls the addition and deletion of vrIpxRipRipApp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxRipRipAppRowStatusEntry

vrIpxRipRipAppRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.2.3.1.1
A single entry in the table represents a single vrIpxRipRipApp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxRipRipAppRowStatusEntry  

vrIpxRipRipAppRowStatus 1.3.6.1.4.1.562.2.4.1.100.7.2.3.1.1.1
This variable is used as the basis for SNMP naming of vrIpxRipRipApp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpxRipRipAppComponentName 1.3.6.1.4.1.562.2.4.1.100.7.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpxRipRipAppStorageType 1.3.6.1.4.1.562.2.4.1.100.7.2.3.1.1.4
This variable represents the storage type value for the vrIpxRipRipApp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpxRipRipAppProtocolPortNameIndex 1.3.6.1.4.1.562.2.4.1.100.7.2.3.1.1.10
This variable represents an index for the vrIpxRipRipApp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..20)  

vrIpxRipRipAppFilterIdentifierIndex 1.3.6.1.4.1.562.2.4.1.100.7.2.3.1.1.11
This variable represents an index for the vrIpxRipRipApp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..268435455  

vrIpxRipRipAppProvTable 1.3.6.1.4.1.562.2.4.1.100.7.2.3.10
This is the RipApplyEntry provisionable group of attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxRipRipAppProvEntry

vrIpxRipRipAppProvEntry 1.3.6.1.4.1.562.2.4.1.100.7.2.3.10.1
An entry in the vrIpxRipRipAppProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxRipRipAppProvEntry  

vrIpxRipRipAppDirection 1.3.6.1.4.1.562.2.4.1.100.7.2.3.10.1.1
This attribute specifies whether this RIP filter is applied as an input filter or an output filter. If set to none, this indicates that the filter, though applied to the port, is not currently active in either direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), output(1), input(2)  

vrIpxSap 1.3.6.1.4.1.562.2.4.1.100.7.3
OBJECT IDENTIFIER    

vrIpxSapRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.3.1
This entry controls the addition and deletion of vrIpxSap components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxSapRowStatusEntry

vrIpxSapRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.3.1.1
A single entry in the table represents a single vrIpxSap component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxSapRowStatusEntry  

vrIpxSapRowStatus 1.3.6.1.4.1.562.2.4.1.100.7.3.1.1.1
This variable is used as the basis for SNMP naming of vrIpxSap components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpxSapComponentName 1.3.6.1.4.1.562.2.4.1.100.7.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpxSapStorageType 1.3.6.1.4.1.562.2.4.1.100.7.3.1.1.4
This variable represents the storage type value for the vrIpxSap tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpxSapIndex 1.3.6.1.4.1.562.2.4.1.100.7.3.1.1.10
This variable represents the index for the vrIpxSap tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpxSapStatsTable 1.3.6.1.4.1.562.2.4.1.100.7.3.10
IPX statistics specific to the SAP protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxSapStatsEntry

vrIpxSapStatsEntry 1.3.6.1.4.1.562.2.4.1.100.7.3.10.1
An entry in the vrIpxSapStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxSapStatsEntry  

vrIpxSapSapIn 1.3.6.1.4.1.562.2.4.1.100.7.3.10.1.1
The total number of SAP packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxSapSapOut 1.3.6.1.4.1.562.2.4.1.100.7.3.10.1.2
The total number of SAP packets locally generated and sent out. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxSapSapIncorrectPackets 1.3.6.1.4.1.562.2.4.1.100.7.3.10.1.3
The number of times an incorrectly formatted SAP packet was received. This counter wraps around to zero after reaching the maximum value of 4294967295.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIpxSapSFltr 1.3.6.1.4.1.562.2.4.1.100.7.3.2
OBJECT IDENTIFIER    

vrIpxSapSFltrRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.3.2.1
This entry controls the addition and deletion of vrIpxSapSFltr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxSapSFltrRowStatusEntry

vrIpxSapSFltrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.3.2.1.1
A single entry in the table represents a single vrIpxSapSFltr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxSapSFltrRowStatusEntry  

vrIpxSapSFltrRowStatus 1.3.6.1.4.1.562.2.4.1.100.7.3.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpxSapSFltr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpxSapSFltrComponentName 1.3.6.1.4.1.562.2.4.1.100.7.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpxSapSFltrStorageType 1.3.6.1.4.1.562.2.4.1.100.7.3.2.1.1.4
This variable represents the storage type value for the vrIpxSapSFltr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpxSapSFltrIdentifierIndex 1.3.6.1.4.1.562.2.4.1.100.7.3.2.1.1.10
This variable represents the index for the vrIpxSapSFltr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..268435455  

vrIpxSapSFltrProvTable 1.3.6.1.4.1.562.2.4.1.100.7.3.2.10
The provisionable attribute group for SapFilter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxSapSFltrProvEntry

vrIpxSapSFltrProvEntry 1.3.6.1.4.1.562.2.4.1.100.7.3.2.10.1
An entry in the vrIpxSapSFltrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxSapSFltrProvEntry  

vrIpxSapSFltrType 1.3.6.1.4.1.562.2.4.1.100.7.3.2.10.1.1
This attribute specifies the Novell Service type of the services to be filtered from the SAP packets. The type can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 4 digits. (For example a valid type would be ff-ff or ffff). A type preceded by a caret(^) should be interpreted as filtering all SAP packets except for those with this type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..6)  

vrIpxSapSFltrName 1.3.6.1.4.1.562.2.4.1.100.7.3.2.10.1.2
This attribute specifies the readable name of the service to be filtered from SAP packets. The name can be 47 characters or less. This does not include the caret (^) character which precedes the name. A name preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..48)  

vrIpxSapSFltrNetworkNumber 1.3.6.1.4.1.562.2.4.1.100.7.3.2.10.1.3
This attribute specifies the network number of the service to be filtered from SAP packets. The network number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 8 digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). A network number preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this network number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..12)  

vrIpxSapSFltrNode 1.3.6.1.4.1.562.2.4.1.100.7.3.2.10.1.4
This attribute specifies the node portion of the IPX address of the service to be filtered from SAP packets. The node number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 12 digits.. (For example a valid node number would be ff-ff-ff-ff-ff-ff or ffffffffffff). A node number preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this node number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..18)  

vrIpxSapSFltrDisposition 1.3.6.1.4.1.562.2.4.1.100.7.3.2.10.1.5
Indicates a reversal of the filter pattern match.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pass(1), filter(2)  

vrIpxSapSFltrOperTable 1.3.6.1.4.1.562.2.4.1.100.7.3.2.11
The operational attribute group for IpxSapFilter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxSapSFltrOperEntry

vrIpxSapSFltrOperEntry 1.3.6.1.4.1.562.2.4.1.100.7.3.2.11.1
An entry in the vrIpxSapSFltrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxSapSFltrOperEntry  

vrIpxSapSFltrNumberOfApplyEntries 1.3.6.1.4.1.562.2.4.1.100.7.3.2.11.1.1
The number of times this filter appears in IpxSapApplyEntry. If zero, this filter is not applied on any ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrIpxSapSapApp 1.3.6.1.4.1.562.2.4.1.100.7.3.3
OBJECT IDENTIFIER    

vrIpxSapSapAppRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.3.3.1
This entry controls the addition and deletion of vrIpxSapSapApp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxSapSapAppRowStatusEntry

vrIpxSapSapAppRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.3.3.1.1
A single entry in the table represents a single vrIpxSapSapApp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxSapSapAppRowStatusEntry  

vrIpxSapSapAppRowStatus 1.3.6.1.4.1.562.2.4.1.100.7.3.3.1.1.1
This variable is used as the basis for SNMP naming of vrIpxSapSapApp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpxSapSapAppComponentName 1.3.6.1.4.1.562.2.4.1.100.7.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpxSapSapAppStorageType 1.3.6.1.4.1.562.2.4.1.100.7.3.3.1.1.4
This variable represents the storage type value for the vrIpxSapSapApp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpxSapSapAppProtocolPortNameIndex 1.3.6.1.4.1.562.2.4.1.100.7.3.3.1.1.10
This variable represents an index for the vrIpxSapSapApp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..20)  

vrIpxSapSapAppFilterIdentifierIndex 1.3.6.1.4.1.562.2.4.1.100.7.3.3.1.1.11
This variable represents an index for the vrIpxSapSapApp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..268435455  

vrIpxSapSapAppProvTable 1.3.6.1.4.1.562.2.4.1.100.7.3.3.10
The IpxSapApplyEntry provisionable group of attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxSapSapAppProvEntry

vrIpxSapSapAppProvEntry 1.3.6.1.4.1.562.2.4.1.100.7.3.3.10.1
An entry in the vrIpxSapSapAppProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxSapSapAppProvEntry  

vrIpxSapSapAppDirection 1.3.6.1.4.1.562.2.4.1.100.7.3.3.10.1.1
Indicates whether this SAP filter is applied as an input filter or an output filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), output(1), input(2)  

vrIpxFwd 1.3.6.1.4.1.562.2.4.1.100.7.4
OBJECT IDENTIFIER    

vrIpxFwdRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.4.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpxFwd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxFwdRowStatusEntry

vrIpxFwdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.4.1.1
A single entry in the table represents a single vrIpxFwd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxFwdRowStatusEntry  

vrIpxFwdRowStatus 1.3.6.1.4.1.562.2.4.1.100.7.4.1.1.1
This variable is used as the basis for SNMP naming of vrIpxFwd components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpxFwdComponentName 1.3.6.1.4.1.562.2.4.1.100.7.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpxFwdStorageType 1.3.6.1.4.1.562.2.4.1.100.7.4.1.1.4
This variable represents the storage type value for the vrIpxFwd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpxFwdNetworkNumberIndex 1.3.6.1.4.1.562.2.4.1.100.7.4.1.1.10
This variable represents the index for the vrIpxFwd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DashedHexString Size(1..4)  

vrIpxFwdOperTable 1.3.6.1.4.1.562.2.4.1.100.7.4.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** IpxForwarding operational attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxFwdOperEntry

vrIpxFwdOperEntry 1.3.6.1.4.1.562.2.4.1.100.7.4.10.1
An entry in the vrIpxFwdOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxFwdOperEntry  

vrIpxFwdProtocol 1.3.6.1.4.1.562.2.4.1.100.7.4.10.1.1
The routing protocol from which knowledge of this destination was obtained.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), local(2), rip(3), nlsp(4), static(5)  

vrIpxFwdTicks 1.3.6.1.4.1.562.2.4.1.100.7.4.10.1.2
The delay, in ticks, to reach this destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIpxFwdHopCount 1.3.6.1.4.1.562.2.4.1.100.7.4.10.1.3
The number of hops required to reach this destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 1..64  

vrIpxFwdProtocolPortId 1.3.6.1.4.1.562.2.4.1.100.7.4.10.1.4
The unique identifier of the ProtocolPort used to reach the next hop.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..20)  

vrIpxFwdNextHopPhysAddress 1.3.6.1.4.1.562.2.4.1.100.7.4.10.1.5
The physical address of the next hop
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress Size(1..6)  

vrIpxFwdNextHopNetworkNumber 1.3.6.1.4.1.562.2.4.1.100.7.4.10.1.6
The IPX network number of the next hop.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DashedHexString Size(1..4)  

vrIpxSrvc 1.3.6.1.4.1.562.2.4.1.100.7.5
OBJECT IDENTIFIER    

vrIpxSrvcRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.5.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpxSrvc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxSrvcRowStatusEntry

vrIpxSrvcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.5.1.1
A single entry in the table represents a single vrIpxSrvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxSrvcRowStatusEntry  

vrIpxSrvcRowStatus 1.3.6.1.4.1.562.2.4.1.100.7.5.1.1.1
This variable is used as the basis for SNMP naming of vrIpxSrvc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpxSrvcComponentName 1.3.6.1.4.1.562.2.4.1.100.7.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpxSrvcStorageType 1.3.6.1.4.1.562.2.4.1.100.7.5.1.1.4
This variable represents the storage type value for the vrIpxSrvc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpxSrvcNetworkNumberIndex 1.3.6.1.4.1.562.2.4.1.100.7.5.1.1.10
This variable represents an index for the vrIpxSrvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DashedHexString Size(1..4)  

vrIpxSrvcNodeIndex 1.3.6.1.4.1.562.2.4.1.100.7.5.1.1.11
This variable represents an index for the vrIpxSrvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DashedHexString Size(1..6)  

vrIpxSrvcTypeIndex 1.3.6.1.4.1.562.2.4.1.100.7.5.1.1.12
This variable represents an index for the vrIpxSrvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

vrIpxSrvcNameIndex 1.3.6.1.4.1.562.2.4.1.100.7.5.1.1.13
This variable represents an index for the vrIpxSrvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..48)  

vrIpxSrvcOperTable 1.3.6.1.4.1.562.2.4.1.100.7.5.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Ipx Services Operational group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxSrvcOperEntry

vrIpxSrvcOperEntry 1.3.6.1.4.1.562.2.4.1.100.7.5.10.1
An entry in the vrIpxSrvcOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxSrvcOperEntry  

vrIpxSrvcSocket 1.3.6.1.4.1.562.2.4.1.100.7.5.10.1.1
Socket at which the service is available
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..65535  

vrIpxSrvcProtocol 1.3.6.1.4.1.562.2.4.1.100.7.5.10.1.2
The protocol from which knowledge of this service was obtained.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), local(2), nlsp(4), static(5), sap(6)  

vrIpxSrvcHopCount 1.3.6.1.4.1.562.2.4.1.100.7.5.10.1.3
Number of hops to the service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..64  

vrIpxAdj 1.3.6.1.4.1.562.2.4.1.100.7.6
OBJECT IDENTIFIER    

vrIpxAdjRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.6.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpxAdj components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxAdjRowStatusEntry

vrIpxAdjRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.6.1.1
A single entry in the table represents a single vrIpxAdj component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxAdjRowStatusEntry  

vrIpxAdjRowStatus 1.3.6.1.4.1.562.2.4.1.100.7.6.1.1.1
This variable is used as the basis for SNMP naming of vrIpxAdj components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIpxAdjComponentName 1.3.6.1.4.1.562.2.4.1.100.7.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpxAdjStorageType 1.3.6.1.4.1.562.2.4.1.100.7.6.1.1.4
This variable represents the storage type value for the vrIpxAdj tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpxAdjProtocolPortIdentifierIndex 1.3.6.1.4.1.562.2.4.1.100.7.6.1.1.10
This variable represents an index for the vrIpxAdj tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..20)  

vrIpxAdjNetworkNumberIndex 1.3.6.1.4.1.562.2.4.1.100.7.6.1.1.11
This variable represents an index for the vrIpxAdj tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DashedHexString Size(1..4)  

vrIpxAdjOperTable 1.3.6.1.4.1.562.2.4.1.100.7.6.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Adjacencies operational group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxAdjOperEntry

vrIpxAdjOperEntry 1.3.6.1.4.1.562.2.4.1.100.7.6.10.1
An entry in the vrIpxAdjOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxAdjOperEntry  

vrIpxAdjPhysAddress 1.3.6.1.4.1.562.2.4.1.100.7.6.10.1.1
The physical address of the adjacent router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress Size(1..6)  

vrIpxAdjAdjacencyState 1.3.6.1.4.1.562.2.4.1.100.7.6.10.1.2
The state of the connection to the adjacent router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initializing(1), up(2), failed(3), down(4)  

vrIpxNs 1.3.6.1.4.1.562.2.4.1.100.7.7
OBJECT IDENTIFIER    

vrIpxNsRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.7.1
This entry controls the addition and deletion of vrIpxNs components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxNsRowStatusEntry

vrIpxNsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.7.1.1
A single entry in the table represents a single vrIpxNs component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxNsRowStatusEntry  

vrIpxNsRowStatus 1.3.6.1.4.1.562.2.4.1.100.7.7.1.1.1
This variable is used as the basis for SNMP naming of vrIpxNs components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpxNsComponentName 1.3.6.1.4.1.562.2.4.1.100.7.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpxNsStorageType 1.3.6.1.4.1.562.2.4.1.100.7.7.1.1.4
This variable represents the storage type value for the vrIpxNs tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpxNsIndex 1.3.6.1.4.1.562.2.4.1.100.7.7.1.1.10
This variable represents the index for the vrIpxNs tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrIpxNsProvTable 1.3.6.1.4.1.562.2.4.1.100.7.7.10
The provisionable attribute group for the IpxNetSentry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxNsProvEntry

vrIpxNsProvEntry 1.3.6.1.4.1.562.2.4.1.100.7.7.10.1
An entry in the vrIpxNsProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxNsProvEntry  

vrIpxNsFirstFilter 1.3.6.1.4.1.562.2.4.1.100.7.7.10.1.1
First NetSentry filter for Ipx. If specified this filter is applied before any other NetSentry filters applicable to the packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrIpxNsLastFilter 1.3.6.1.4.1.562.2.4.1.100.7.7.10.1.2
Last filter for Ipx. If specified this filter is applied after all other NetSentry filters applicable to the packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrIpxNsLocalInFilter 1.3.6.1.4.1.562.2.4.1.100.7.7.10.1.3
The filter name of the NetSentry filter to be applied at the Local In filter point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrIpxNsLocalOutFilter 1.3.6.1.4.1.562.2.4.1.100.7.7.10.1.4
The filter name of the NetSentry filter to be applied at the Local Out filter point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrIpxNsNetSentryApp 1.3.6.1.4.1.562.2.4.1.100.7.7.2
OBJECT IDENTIFIER    

vrIpxNsNetSentryAppRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.7.7.2.1
This entry controls the addition and deletion of vrIpxNsNetSentryApp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxNsNetSentryAppRowStatusEntry

vrIpxNsNetSentryAppRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.7.7.2.1.1
A single entry in the table represents a single vrIpxNsNetSentryApp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxNsNetSentryAppRowStatusEntry  

vrIpxNsNetSentryAppRowStatus 1.3.6.1.4.1.562.2.4.1.100.7.7.2.1.1.1
This variable is used as the basis for SNMP naming of vrIpxNsNetSentryApp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrIpxNsNetSentryAppComponentName 1.3.6.1.4.1.562.2.4.1.100.7.7.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIpxNsNetSentryAppStorageType 1.3.6.1.4.1.562.2.4.1.100.7.7.2.1.1.4
This variable represents the storage type value for the vrIpxNsNetSentryApp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIpxNsNetSentryAppEntryIndex 1.3.6.1.4.1.562.2.4.1.100.7.7.2.1.1.10
This variable represents the index for the vrIpxNsNetSentryApp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..268435455  

vrIpxNsNetSentryAppProvTable 1.3.6.1.4.1.562.2.4.1.100.7.7.2.10
The Provisionable group for the IpxNetSentryApplyList.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIpxNsNetSentryAppProvEntry

vrIpxNsNetSentryAppProvEntry 1.3.6.1.4.1.562.2.4.1.100.7.7.2.10.1
An entry in the vrIpxNsNetSentryAppProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIpxNsNetSentryAppProvEntry  

vrIpxNsNetSentryAppFilter 1.3.6.1.4.1.562.2.4.1.100.7.7.2.10.1.1
The name of the filter to be applied to packets matching the conditions in this entry of the IpxNetSentryApplyList.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..32)  

vrIpxNsNetSentryAppNetworkNumber1 1.3.6.1.4.1.562.2.4.1.100.7.7.2.10.1.2
The first IPX network Number used to compare. This network number can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). In addition a value of * will be accepted as a wildcard for all networks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..11)  

vrIpxNsNetSentryAppNode1 1.3.6.1.4.1.562.2.4.1.100.7.7.2.10.1.3
This attribute is the first IPX node address used to compare. This node number can be entered either as a dashed hex string or a string of hex digits. (For example a valid node number would be ff-ff-ff-ff-ff-ff or ffffffffffff). In addition a value of * will be accepted as a wildcard for all nodes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..17)  

vrIpxNsNetSentryAppDirection 1.3.6.1.4.1.562.2.4.1.100.7.7.2.10.1.4
Indicates the direction a packet must be moving between the first and second apply list entries in order for the entries to match. First 'to' second, first 'from' second, or first 'tofrom' second (either direction).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER to(1), from(2), tofrom(3)  

vrIpxNsNetSentryAppNetworkNumber2 1.3.6.1.4.1.562.2.4.1.100.7.7.2.10.1.5
The second IPX network Number used to compare. This network number can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). In addition a value of * will be accepted as a wildcard for all networks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..11)  

vrIpxNsNetSentryAppNode2 1.3.6.1.4.1.562.2.4.1.100.7.7.2.10.1.6
This attribute is the second IPX node address used to compared. This node can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff-ff-ff or ffffffffffff). In addition a value of * will be accepted as a wildcard for all nodes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..17)  

ipxGroup 1.3.6.1.4.1.562.2.4.2.28.1
OBJECT IDENTIFIER    

ipxGroupBE 1.3.6.1.4.1.562.2.4.2.28.1.5
OBJECT IDENTIFIER    

ipxGroupBE01 1.3.6.1.4.1.562.2.4.2.28.1.5.2
OBJECT IDENTIFIER    

ipxGroupBE01A 1.3.6.1.4.1.562.2.4.2.28.1.5.2.2
OBJECT IDENTIFIER    

ipxCapabilities 1.3.6.1.4.1.562.2.4.2.28.3
OBJECT IDENTIFIER    

ipxCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.28.3.5
OBJECT IDENTIFIER    

ipxCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.28.3.5.2
OBJECT IDENTIFIER    

ipxCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.28.3.5.2.2
OBJECT IDENTIFIER    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor