Nortel-Magellan-Passport-LanDriversMIB
File:
Nortel-Magellan-Passport-LanDriversMIB.mib (459659 bytes)
Imported modules
Imported symbols
Defined Types
| LpEnetRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetRowStatus |
RowStatus |
|
| |
lpEnetComponentName |
DisplayString |
|
| |
lpEnetStorageType |
StorageType |
|
| |
lpEnetIndex |
Integer32 |
|
| LpEnetCidDataEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetCustomerIdentifier |
Unsigned32 |
|
| LpEnetIfEntryEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetIfAdminStatus |
INTEGER |
|
| |
lpEnetIfIndex |
InterfaceIndex |
|
| LpEnetProvEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetHeartbeatPacket |
INTEGER |
|
| |
lpEnetApplicationFramerName |
Link |
|
| LpEnetAdminInfoEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetVendor |
AsciiString |
|
| |
lpEnetCommentText |
AsciiString |
|
| LpEnetStateEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetAdminState |
INTEGER |
|
| |
lpEnetOperationalState |
INTEGER |
|
| |
lpEnetUsageState |
INTEGER |
|
| LpEnetOperStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetSnmpOperStatus |
INTEGER |
|
| LpEnetOperEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetMacAddress |
MacAddress |
|
| LpEnetStatsEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetAlignmentErrors |
Counter32 |
|
| |
lpEnetFcsErrors |
Counter32 |
|
| |
lpEnetSingleCollisionFrames |
Counter32 |
|
| |
lpEnetMultipleCollisionFrames |
Counter32 |
|
| |
lpEnetSqeTestErrors |
Counter32 |
|
| |
lpEnetDeferredTransmissions |
Counter32 |
|
| |
lpEnetLateCollisions |
Counter32 |
|
| |
lpEnetExcessiveCollisions |
Counter32 |
|
| |
lpEnetMacTransmitErrors |
Counter32 |
|
| |
lpEnetCarrierSenseErrors |
Counter32 |
|
| |
lpEnetFrameTooLongs |
Counter32 |
|
| |
lpEnetMacReceiveErrors |
Counter32 |
|
| LpEnetLtRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtRowStatus |
RowStatus |
|
| |
lpEnetLtComponentName |
DisplayString |
|
| |
lpEnetLtStorageType |
StorageType |
|
| |
lpEnetLtIndex |
NonReplicated |
|
| LpEnetLtFrmCmpRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtFrmCmpRowStatus |
RowStatus |
|
| |
lpEnetLtFrmCmpComponentName |
DisplayString |
|
| |
lpEnetLtFrmCmpStorageType |
StorageType |
|
| |
lpEnetLtFrmCmpIndex |
NonReplicated |
|
| LpEnetLtFrmCpyRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtFrmCpyRowStatus |
RowStatus |
|
| |
lpEnetLtFrmCpyComponentName |
DisplayString |
|
| |
lpEnetLtFrmCpyStorageType |
StorageType |
|
| |
lpEnetLtFrmCpyIndex |
NonReplicated |
|
| LpEnetLtPrtCfgRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtPrtCfgRowStatus |
RowStatus |
|
| |
lpEnetLtPrtCfgComponentName |
DisplayString |
|
| |
lpEnetLtPrtCfgStorageType |
StorageType |
|
| |
lpEnetLtPrtCfgIndex |
NonReplicated |
|
| LpEnetLtFbRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtFbRowStatus |
RowStatus |
|
| |
lpEnetLtFbComponentName |
DisplayString |
|
| |
lpEnetLtFbStorageType |
StorageType |
|
| |
lpEnetLtFbIndex |
NonReplicated |
|
| LpEnetLtFbTxInfoRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtFbTxInfoRowStatus |
RowStatus |
|
| |
lpEnetLtFbTxInfoComponentName |
DisplayString |
|
| |
lpEnetLtFbTxInfoStorageType |
StorageType |
|
| |
lpEnetLtFbTxInfoIndex |
NonReplicated |
|
| LpEnetLtFbFddiMacRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtFbFddiMacRowStatus |
RowStatus |
|
| |
lpEnetLtFbFddiMacComponentName |
DisplayString |
|
| |
lpEnetLtFbFddiMacStorageType |
StorageType |
|
| |
lpEnetLtFbFddiMacIndex |
NonReplicated |
|
| LpEnetLtFbMacEnetRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtFbMacEnetRowStatus |
RowStatus |
|
| |
lpEnetLtFbMacEnetComponentName |
DisplayString |
|
| |
lpEnetLtFbMacEnetStorageType |
StorageType |
|
| |
lpEnetLtFbMacEnetIndex |
NonReplicated |
|
| LpEnetLtFbMacTrRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtFbMacTrRowStatus |
RowStatus |
|
| |
lpEnetLtFbMacTrComponentName |
DisplayString |
|
| |
lpEnetLtFbMacTrStorageType |
StorageType |
|
| |
lpEnetLtFbMacTrIndex |
NonReplicated |
|
| LpEnetLtFbDataRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtFbDataRowStatus |
RowStatus |
|
| |
lpEnetLtFbDataComponentName |
DisplayString |
|
| |
lpEnetLtFbDataStorageType |
StorageType |
|
| |
lpEnetLtFbDataIndex |
NonReplicated |
|
| LpEnetLtFbIpHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtFbIpHRowStatus |
RowStatus |
|
| |
lpEnetLtFbIpHComponentName |
DisplayString |
|
| |
lpEnetLtFbIpHStorageType |
StorageType |
|
| |
lpEnetLtFbIpHIndex |
NonReplicated |
|
| LpEnetLtFbLlchRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtFbLlchRowStatus |
RowStatus |
|
| |
lpEnetLtFbLlchComponentName |
DisplayString |
|
| |
lpEnetLtFbLlchStorageType |
StorageType |
|
| |
lpEnetLtFbLlchIndex |
NonReplicated |
|
| LpEnetLtFbAppleHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtFbAppleHRowStatus |
RowStatus |
|
| |
lpEnetLtFbAppleHComponentName |
DisplayString |
|
| |
lpEnetLtFbAppleHStorageType |
StorageType |
|
| |
lpEnetLtFbAppleHIndex |
NonReplicated |
|
| LpEnetLtFbIpxHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtFbIpxHRowStatus |
RowStatus |
|
| |
lpEnetLtFbIpxHComponentName |
DisplayString |
|
| |
lpEnetLtFbIpxHStorageType |
StorageType |
|
| |
lpEnetLtFbIpxHIndex |
NonReplicated |
|
| LpEnetLtCntlRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetLtCntlRowStatus |
RowStatus |
|
| |
lpEnetLtCntlComponentName |
DisplayString |
|
| |
lpEnetLtCntlStorageType |
StorageType |
|
| |
lpEnetLtCntlIndex |
NonReplicated |
|
| LpEnetTestRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetTestRowStatus |
RowStatus |
|
| |
lpEnetTestComponentName |
DisplayString |
|
| |
lpEnetTestStorageType |
StorageType |
|
| |
lpEnetTestIndex |
NonReplicated |
|
| LpEnetTestPTOEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetTestType |
INTEGER |
|
| |
lpEnetTestFrmSize |
Unsigned32 |
|
| |
lpEnetTestDuration |
Unsigned32 |
|
| LpEnetTestResultsEntry |
|
| SEQUENCE |
|
|
|
| |
lpEnetTestElapsedTime |
Counter32 |
|
| |
lpEnetTestTimeRemaining |
Unsigned32 |
|
| |
lpEnetTestCauseOfTermination |
INTEGER |
|
| |
lpEnetTestFrmTx |
PassportCounter64 |
|
| |
lpEnetTestBitsTx |
PassportCounter64 |
|
| |
lpEnetTestFrmRx |
PassportCounter64 |
|
| |
lpEnetTestBitsRx |
PassportCounter64 |
|
| |
lpEnetTestErroredFrmRx |
PassportCounter64 |
|
| LpFiRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiRowStatus |
RowStatus |
|
| |
lpFiComponentName |
DisplayString |
|
| |
lpFiStorageType |
StorageType |
|
| |
lpFiIndex |
Integer32 |
|
| LpFiCidDataEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiCustomerIdentifier |
Unsigned32 |
|
| LpFiIfEntryEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiIfAdminStatus |
INTEGER |
|
| |
lpFiIfIndex |
InterfaceIndex |
|
| LpFiSmtProvEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiUserData |
AsciiString |
|
| |
lpFiAcceptAa |
INTEGER |
|
| |
lpFiAcceptBb |
INTEGER |
|
| |
lpFiAcceptAs |
INTEGER |
|
| |
lpFiAcceptBs |
INTEGER |
|
| |
lpFiAcceptAm |
INTEGER |
|
| |
lpFiAcceptBm |
INTEGER |
|
| |
lpFiUseThruBa |
INTEGER |
|
| |
lpFiNeighborNotifyInterval |
Unsigned32 |
|
| |
lpFiStatusReportPolicy |
INTEGER |
|
| |
lpFiTraceMaxExpirationTimer |
FddiTimeMilli |
|
| |
lpFiApplicationFramerName |
Link |
|
| LpFiMacProvEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiTokenRequestTimer |
FddiTimeNano |
|
| |
lpFiTokenMaxTimer |
FddiTimeNano |
|
| |
lpFiValidTransmissionTimer |
FddiTimeNano |
|
| LpFiStateEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiAdminState |
INTEGER |
|
| |
lpFiOperationalState |
INTEGER |
|
| |
lpFiUsageState |
INTEGER |
|
| LpFiOperStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiSnmpOperStatus |
INTEGER |
|
| LpFiSmtOperEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiVersion |
AsciiString |
|
| |
lpFiBypassPresent |
INTEGER |
|
| |
lpFiEcmState |
INTEGER |
|
| |
lpFiCfState |
INTEGER |
|
| LpFiMacOperEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiRingLatency |
Gauge32 |
|
| |
lpFiMacAddress |
FddiMACLongAddressType |
|
| |
lpFiUpstreamNeighbor |
FddiMACLongAddressType |
|
| |
lpFiDownstreamNeighbor |
FddiMACLongAddressType |
|
| |
lpFiOldUpstreamNeighbor |
FddiMACLongAddressType |
|
| |
lpFiOldDownstreamNeighbor |
FddiMACLongAddressType |
|
| |
lpFiDupAddressTest |
INTEGER |
|
| |
lpFiTokenNegotiatedTimer |
FddiTimeNano |
|
| |
lpFiFrameCounts |
Counter32 |
|
| |
lpFiCopiedCounts |
Counter32 |
|
| |
lpFiTransmitCounts |
Counter32 |
|
| |
lpFiErrorCounts |
Counter32 |
|
| |
lpFiLostCounts |
Counter32 |
|
| |
lpFiRmtState |
INTEGER |
|
| |
lpFiFrameErrorFlag |
INTEGER |
|
| LpFiMacCOperEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiTokenCounts |
Counter32 |
|
| |
lpFiTvxExpiredCounts |
Counter32 |
|
| |
lpFiNotCopiedCounts |
Counter32 |
|
| |
lpFiLateCounts |
Counter32 |
|
| |
lpFiRingOpCounts |
Counter32 |
|
| LpFiNcMacOperEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiNcMacAddress |
MacAddress |
|
| |
lpFiNcUpstreamNeighbor |
MacAddress |
|
| |
lpFiNcDownstreamNeighbor |
MacAddress |
|
| |
lpFiNcOldUpstreamNeighbor |
MacAddress |
|
| |
lpFiNcOldDownstreamNeighbor |
MacAddress |
|
| LpFiLtRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtRowStatus |
RowStatus |
|
| |
lpFiLtComponentName |
DisplayString |
|
| |
lpFiLtStorageType |
StorageType |
|
| |
lpFiLtIndex |
NonReplicated |
|
| LpFiLtFrmCmpRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtFrmCmpRowStatus |
RowStatus |
|
| |
lpFiLtFrmCmpComponentName |
DisplayString |
|
| |
lpFiLtFrmCmpStorageType |
StorageType |
|
| |
lpFiLtFrmCmpIndex |
NonReplicated |
|
| LpFiLtFrmCpyRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtFrmCpyRowStatus |
RowStatus |
|
| |
lpFiLtFrmCpyComponentName |
DisplayString |
|
| |
lpFiLtFrmCpyStorageType |
StorageType |
|
| |
lpFiLtFrmCpyIndex |
NonReplicated |
|
| LpFiLtPrtCfgRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtPrtCfgRowStatus |
RowStatus |
|
| |
lpFiLtPrtCfgComponentName |
DisplayString |
|
| |
lpFiLtPrtCfgStorageType |
StorageType |
|
| |
lpFiLtPrtCfgIndex |
NonReplicated |
|
| LpFiLtFbRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtFbRowStatus |
RowStatus |
|
| |
lpFiLtFbComponentName |
DisplayString |
|
| |
lpFiLtFbStorageType |
StorageType |
|
| |
lpFiLtFbIndex |
NonReplicated |
|
| LpFiLtFbTxInfoRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtFbTxInfoRowStatus |
RowStatus |
|
| |
lpFiLtFbTxInfoComponentName |
DisplayString |
|
| |
lpFiLtFbTxInfoStorageType |
StorageType |
|
| |
lpFiLtFbTxInfoIndex |
NonReplicated |
|
| LpFiLtFbFddiMacRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtFbFddiMacRowStatus |
RowStatus |
|
| |
lpFiLtFbFddiMacComponentName |
DisplayString |
|
| |
lpFiLtFbFddiMacStorageType |
StorageType |
|
| |
lpFiLtFbFddiMacIndex |
NonReplicated |
|
| LpFiLtFbMacEnetRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtFbMacEnetRowStatus |
RowStatus |
|
| |
lpFiLtFbMacEnetComponentName |
DisplayString |
|
| |
lpFiLtFbMacEnetStorageType |
StorageType |
|
| |
lpFiLtFbMacEnetIndex |
NonReplicated |
|
| LpFiLtFbMacTrRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtFbMacTrRowStatus |
RowStatus |
|
| |
lpFiLtFbMacTrComponentName |
DisplayString |
|
| |
lpFiLtFbMacTrStorageType |
StorageType |
|
| |
lpFiLtFbMacTrIndex |
NonReplicated |
|
| LpFiLtFbDataRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtFbDataRowStatus |
RowStatus |
|
| |
lpFiLtFbDataComponentName |
DisplayString |
|
| |
lpFiLtFbDataStorageType |
StorageType |
|
| |
lpFiLtFbDataIndex |
NonReplicated |
|
| LpFiLtFbIpHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtFbIpHRowStatus |
RowStatus |
|
| |
lpFiLtFbIpHComponentName |
DisplayString |
|
| |
lpFiLtFbIpHStorageType |
StorageType |
|
| |
lpFiLtFbIpHIndex |
NonReplicated |
|
| LpFiLtFbLlchRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtFbLlchRowStatus |
RowStatus |
|
| |
lpFiLtFbLlchComponentName |
DisplayString |
|
| |
lpFiLtFbLlchStorageType |
StorageType |
|
| |
lpFiLtFbLlchIndex |
NonReplicated |
|
| LpFiLtFbAppleHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtFbAppleHRowStatus |
RowStatus |
|
| |
lpFiLtFbAppleHComponentName |
DisplayString |
|
| |
lpFiLtFbAppleHStorageType |
StorageType |
|
| |
lpFiLtFbAppleHIndex |
NonReplicated |
|
| LpFiLtFbIpxHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtFbIpxHRowStatus |
RowStatus |
|
| |
lpFiLtFbIpxHComponentName |
DisplayString |
|
| |
lpFiLtFbIpxHStorageType |
StorageType |
|
| |
lpFiLtFbIpxHIndex |
NonReplicated |
|
| LpFiLtCntlRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiLtCntlRowStatus |
RowStatus |
|
| |
lpFiLtCntlComponentName |
DisplayString |
|
| |
lpFiLtCntlStorageType |
StorageType |
|
| |
lpFiLtCntlIndex |
NonReplicated |
|
| LpFiPhyRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiPhyRowStatus |
RowStatus |
|
| |
lpFiPhyComponentName |
DisplayString |
|
| |
lpFiPhyStorageType |
StorageType |
|
| |
lpFiPhyFddiPhyTypeIndex |
INTEGER |
|
| LpFiPhyProvEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiPhyLerCutoff |
Unsigned32 |
|
| |
lpFiPhyLerAlarm |
Unsigned32 |
|
| |
lpFiPhyLinkErrorMonitor |
INTEGER |
|
| LpFiPhyOperEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiPhyNeighborType |
INTEGER |
|
| |
lpFiPhyLctFailCounts |
Counter32 |
|
| |
lpFiPhyLerEstimate |
Unsigned32 |
|
| |
lpFiPhyLemRejectCounts |
Counter32 |
|
| |
lpFiPhyLemCounts |
Counter32 |
|
| |
lpFiPhyPcmState |
INTEGER |
|
| |
lpFiPhyLerFlag |
INTEGER |
|
| |
lpFiPhySignalState |
INTEGER |
|
| |
lpFiPhySignalBitsRcvd |
OCTET STRING |
|
| |
lpFiPhySignalBitsTxmt |
OCTET STRING |
|
| LpFiTestRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiTestRowStatus |
RowStatus |
|
| |
lpFiTestComponentName |
DisplayString |
|
| |
lpFiTestStorageType |
StorageType |
|
| |
lpFiTestIndex |
NonReplicated |
|
| LpFiTestPTOEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiTestType |
INTEGER |
|
| |
lpFiTestFrmSize |
Unsigned32 |
|
| |
lpFiTestDuration |
Unsigned32 |
|
| LpFiTestResultsEntry |
|
| SEQUENCE |
|
|
|
| |
lpFiTestElapsedTime |
Counter32 |
|
| |
lpFiTestTimeRemaining |
Unsigned32 |
|
| |
lpFiTestCauseOfTermination |
INTEGER |
|
| |
lpFiTestFrmTx |
PassportCounter64 |
|
| |
lpFiTestBitsTx |
PassportCounter64 |
|
| |
lpFiTestFrmRx |
PassportCounter64 |
|
| |
lpFiTestBitsRx |
PassportCounter64 |
|
| |
lpFiTestErroredFrmRx |
PassportCounter64 |
|
| LpTrRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrRowStatus |
RowStatus |
|
| |
lpTrComponentName |
DisplayString |
|
| |
lpTrStorageType |
StorageType |
|
| |
lpTrIndex |
Integer32 |
|
| LpTrCidDataEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrCustomerIdentifier |
Unsigned32 |
|
| LpTrIfEntryEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrIfAdminStatus |
INTEGER |
|
| |
lpTrIfIndex |
InterfaceIndex |
|
| LpTrProvEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrRingSpeed |
INTEGER |
|
| |
lpTrMonitorParticipate |
INTEGER |
|
| |
lpTrFunctionalAddress |
MacAddress |
|
| |
lpTrNodeAddress |
MacAddress |
|
| |
lpTrGroupAddress |
MacAddress |
|
| |
lpTrProductId |
AsciiString |
|
| |
lpTrApplicationFramerName |
Link |
|
| LpTrStateEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrAdminState |
INTEGER |
|
| |
lpTrOperationalState |
INTEGER |
|
| |
lpTrUsageState |
INTEGER |
|
| LpTrOperStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrSnmpOperStatus |
INTEGER |
|
| LpTrOperEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrMacAddress |
MacAddress |
|
| |
lpTrRingState |
INTEGER |
|
| |
lpTrRingStatus |
OCTET STRING |
|
| |
lpTrRingOpenStatus |
INTEGER |
|
| |
lpTrUpStream |
MacAddress |
|
| |
lpTrChipSet |
INTEGER |
|
| |
lpTrLastTimeBeaconSent |
EnterpriseDateAndTime |
|
| LpTrStatsEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLineErrors |
Counter32 |
|
| |
lpTrBurstErrors |
Counter32 |
|
| |
lpTrAcErrors |
Counter32 |
|
| |
lpTrAbortTransErrors |
Counter32 |
|
| |
lpTrInternalErrors |
Counter32 |
|
| |
lpTrLostFrameErrors |
Counter32 |
|
| |
lpTrReceiveCongestions |
Counter32 |
|
| |
lpTrFrameCopiedErrors |
Counter32 |
|
| |
lpTrTokenErrors |
Counter32 |
|
| |
lpTrSoftErrors |
Counter32 |
|
| |
lpTrHardErrors |
Counter32 |
|
| |
lpTrSignalLoss |
Counter32 |
|
| |
lpTrTransmitBeacons |
Counter32 |
|
| |
lpTrRingRecoverys |
Counter32 |
|
| |
lpTrLobeWires |
Counter32 |
|
| |
lpTrRemoveRings |
Counter32 |
|
| |
lpTrSingleStation |
Counter32 |
|
| |
lpTrFreqErrors |
Counter32 |
|
| LpTrNcMacOperEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrNcMacAddress |
MacAddress |
|
| |
lpTrNcUpStream |
MacAddress |
|
| LpTrLtRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtRowStatus |
RowStatus |
|
| |
lpTrLtComponentName |
DisplayString |
|
| |
lpTrLtStorageType |
StorageType |
|
| |
lpTrLtIndex |
NonReplicated |
|
| LpTrLtFrmCmpRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtFrmCmpRowStatus |
RowStatus |
|
| |
lpTrLtFrmCmpComponentName |
DisplayString |
|
| |
lpTrLtFrmCmpStorageType |
StorageType |
|
| |
lpTrLtFrmCmpIndex |
NonReplicated |
|
| LpTrLtFrmCpyRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtFrmCpyRowStatus |
RowStatus |
|
| |
lpTrLtFrmCpyComponentName |
DisplayString |
|
| |
lpTrLtFrmCpyStorageType |
StorageType |
|
| |
lpTrLtFrmCpyIndex |
NonReplicated |
|
| LpTrLtPrtCfgRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtPrtCfgRowStatus |
RowStatus |
|
| |
lpTrLtPrtCfgComponentName |
DisplayString |
|
| |
lpTrLtPrtCfgStorageType |
StorageType |
|
| |
lpTrLtPrtCfgIndex |
NonReplicated |
|
| LpTrLtFbRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtFbRowStatus |
RowStatus |
|
| |
lpTrLtFbComponentName |
DisplayString |
|
| |
lpTrLtFbStorageType |
StorageType |
|
| |
lpTrLtFbIndex |
NonReplicated |
|
| LpTrLtFbTxInfoRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtFbTxInfoRowStatus |
RowStatus |
|
| |
lpTrLtFbTxInfoComponentName |
DisplayString |
|
| |
lpTrLtFbTxInfoStorageType |
StorageType |
|
| |
lpTrLtFbTxInfoIndex |
NonReplicated |
|
| LpTrLtFbFddiMacRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtFbFddiMacRowStatus |
RowStatus |
|
| |
lpTrLtFbFddiMacComponentName |
DisplayString |
|
| |
lpTrLtFbFddiMacStorageType |
StorageType |
|
| |
lpTrLtFbFddiMacIndex |
NonReplicated |
|
| LpTrLtFbMacEnetRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtFbMacEnetRowStatus |
RowStatus |
|
| |
lpTrLtFbMacEnetComponentName |
DisplayString |
|
| |
lpTrLtFbMacEnetStorageType |
StorageType |
|
| |
lpTrLtFbMacEnetIndex |
NonReplicated |
|
| LpTrLtFbMacTrRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtFbMacTrRowStatus |
RowStatus |
|
| |
lpTrLtFbMacTrComponentName |
DisplayString |
|
| |
lpTrLtFbMacTrStorageType |
StorageType |
|
| |
lpTrLtFbMacTrIndex |
NonReplicated |
|
| LpTrLtFbDataRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtFbDataRowStatus |
RowStatus |
|
| |
lpTrLtFbDataComponentName |
DisplayString |
|
| |
lpTrLtFbDataStorageType |
StorageType |
|
| |
lpTrLtFbDataIndex |
NonReplicated |
|
| LpTrLtFbIpHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtFbIpHRowStatus |
RowStatus |
|
| |
lpTrLtFbIpHComponentName |
DisplayString |
|
| |
lpTrLtFbIpHStorageType |
StorageType |
|
| |
lpTrLtFbIpHIndex |
NonReplicated |
|
| LpTrLtFbLlchRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtFbLlchRowStatus |
RowStatus |
|
| |
lpTrLtFbLlchComponentName |
DisplayString |
|
| |
lpTrLtFbLlchStorageType |
StorageType |
|
| |
lpTrLtFbLlchIndex |
NonReplicated |
|
| LpTrLtFbAppleHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtFbAppleHRowStatus |
RowStatus |
|
| |
lpTrLtFbAppleHComponentName |
DisplayString |
|
| |
lpTrLtFbAppleHStorageType |
StorageType |
|
| |
lpTrLtFbAppleHIndex |
NonReplicated |
|
| LpTrLtFbIpxHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtFbIpxHRowStatus |
RowStatus |
|
| |
lpTrLtFbIpxHComponentName |
DisplayString |
|
| |
lpTrLtFbIpxHStorageType |
StorageType |
|
| |
lpTrLtFbIpxHIndex |
NonReplicated |
|
| LpTrLtCntlRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrLtCntlRowStatus |
RowStatus |
|
| |
lpTrLtCntlComponentName |
DisplayString |
|
| |
lpTrLtCntlStorageType |
StorageType |
|
| |
lpTrLtCntlIndex |
NonReplicated |
|
| LpTrTestRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrTestRowStatus |
RowStatus |
|
| |
lpTrTestComponentName |
DisplayString |
|
| |
lpTrTestStorageType |
StorageType |
|
| |
lpTrTestIndex |
NonReplicated |
|
| LpTrTestPTOEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrTestType |
INTEGER |
|
| |
lpTrTestFrmSize |
Unsigned32 |
|
| |
lpTrTestDuration |
Unsigned32 |
|
| LpTrTestResultsEntry |
|
| SEQUENCE |
|
|
|
| |
lpTrTestElapsedTime |
Counter32 |
|
| |
lpTrTestTimeRemaining |
Unsigned32 |
|
| |
lpTrTestCauseOfTermination |
INTEGER |
|
| |
lpTrTestFrmTx |
PassportCounter64 |
|
| |
lpTrTestBitsTx |
PassportCounter64 |
|
| |
lpTrTestFrmRx |
PassportCounter64 |
|
| |
lpTrTestBitsRx |
PassportCounter64 |
|
| |
lpTrTestErroredFrmRx |
PassportCounter64 |
|
| LpIlsFwdrRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrRowStatus |
RowStatus |
|
| |
lpIlsFwdrComponentName |
DisplayString |
|
| |
lpIlsFwdrStorageType |
StorageType |
|
| |
lpIlsFwdrIndex |
Integer32 |
|
| LpIlsFwdrIfEntryEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrIfAdminStatus |
INTEGER |
|
| |
lpIlsFwdrIfIndex |
InterfaceIndex |
|
| LpIlsFwdrStateEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrAdminState |
INTEGER |
|
| |
lpIlsFwdrOperationalState |
INTEGER |
|
| |
lpIlsFwdrUsageState |
INTEGER |
|
| LpIlsFwdrOperStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrSnmpOperStatus |
INTEGER |
|
| LpIlsFwdrStatsEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrFramesReceived |
PassportCounter64 |
|
| |
lpIlsFwdrProcessedCount |
PassportCounter64 |
|
| |
lpIlsFwdrErrorCount |
PassportCounter64 |
|
| |
lpIlsFwdrFramesDiscarded |
PassportCounter64 |
|
| LpIlsFwdrLinkToTrafficSourceEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLinkToTrafficSourceValue |
Link |
|
| LpIlsFwdrLtRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtComponentName |
DisplayString |
|
| |
lpIlsFwdrLtStorageType |
StorageType |
|
| |
lpIlsFwdrLtIndex |
NonReplicated |
|
| LpIlsFwdrLtFrmCmpRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtFrmCmpRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtFrmCmpComponentName |
DisplayString |
|
| |
lpIlsFwdrLtFrmCmpStorageType |
StorageType |
|
| |
lpIlsFwdrLtFrmCmpIndex |
NonReplicated |
|
| LpIlsFwdrLtFrmCpyRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtFrmCpyRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtFrmCpyComponentName |
DisplayString |
|
| |
lpIlsFwdrLtFrmCpyStorageType |
StorageType |
|
| |
lpIlsFwdrLtFrmCpyIndex |
NonReplicated |
|
| LpIlsFwdrLtPrtCfgRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtPrtCfgRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtPrtCfgComponentName |
DisplayString |
|
| |
lpIlsFwdrLtPrtCfgStorageType |
StorageType |
|
| |
lpIlsFwdrLtPrtCfgIndex |
NonReplicated |
|
| LpIlsFwdrLtFbRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtFbRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtFbComponentName |
DisplayString |
|
| |
lpIlsFwdrLtFbStorageType |
StorageType |
|
| |
lpIlsFwdrLtFbIndex |
NonReplicated |
|
| LpIlsFwdrLtFbTxInfoRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtFbTxInfoRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtFbTxInfoComponentName |
DisplayString |
|
| |
lpIlsFwdrLtFbTxInfoStorageType |
StorageType |
|
| |
lpIlsFwdrLtFbTxInfoIndex |
NonReplicated |
|
| LpIlsFwdrLtFbFddiMacRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtFbFddiMacRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtFbFddiMacComponentName |
DisplayString |
|
| |
lpIlsFwdrLtFbFddiMacStorageType |
StorageType |
|
| |
lpIlsFwdrLtFbFddiMacIndex |
NonReplicated |
|
| LpIlsFwdrLtFbMacEnetRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtFbMacEnetRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtFbMacEnetComponentName |
DisplayString |
|
| |
lpIlsFwdrLtFbMacEnetStorageType |
StorageType |
|
| |
lpIlsFwdrLtFbMacEnetIndex |
NonReplicated |
|
| LpIlsFwdrLtFbMacTrRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtFbMacTrRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtFbMacTrComponentName |
DisplayString |
|
| |
lpIlsFwdrLtFbMacTrStorageType |
StorageType |
|
| |
lpIlsFwdrLtFbMacTrIndex |
NonReplicated |
|
| LpIlsFwdrLtFbDataRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtFbDataRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtFbDataComponentName |
DisplayString |
|
| |
lpIlsFwdrLtFbDataStorageType |
StorageType |
|
| |
lpIlsFwdrLtFbDataIndex |
NonReplicated |
|
| LpIlsFwdrLtFbIpHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtFbIpHRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtFbIpHComponentName |
DisplayString |
|
| |
lpIlsFwdrLtFbIpHStorageType |
StorageType |
|
| |
lpIlsFwdrLtFbIpHIndex |
NonReplicated |
|
| LpIlsFwdrLtFbLlchRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtFbLlchRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtFbLlchComponentName |
DisplayString |
|
| |
lpIlsFwdrLtFbLlchStorageType |
StorageType |
|
| |
lpIlsFwdrLtFbLlchIndex |
NonReplicated |
|
| LpIlsFwdrLtFbAppleHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtFbAppleHRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtFbAppleHComponentName |
DisplayString |
|
| |
lpIlsFwdrLtFbAppleHStorageType |
StorageType |
|
| |
lpIlsFwdrLtFbAppleHIndex |
NonReplicated |
|
| LpIlsFwdrLtFbIpxHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtFbIpxHRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtFbIpxHComponentName |
DisplayString |
|
| |
lpIlsFwdrLtFbIpxHStorageType |
StorageType |
|
| |
lpIlsFwdrLtFbIpxHIndex |
NonReplicated |
|
| LpIlsFwdrLtCntlRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrLtCntlRowStatus |
RowStatus |
|
| |
lpIlsFwdrLtCntlComponentName |
DisplayString |
|
| |
lpIlsFwdrLtCntlStorageType |
StorageType |
|
| |
lpIlsFwdrLtCntlIndex |
NonReplicated |
|
| LpIlsFwdrTestRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrTestRowStatus |
RowStatus |
|
| |
lpIlsFwdrTestComponentName |
DisplayString |
|
| |
lpIlsFwdrTestStorageType |
StorageType |
|
| |
lpIlsFwdrTestIndex |
NonReplicated |
|
| LpIlsFwdrTestPTOEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrTestType |
INTEGER |
|
| |
lpIlsFwdrTestFrmSize |
Unsigned32 |
|
| |
lpIlsFwdrTestDuration |
Unsigned32 |
|
| LpIlsFwdrTestResultsEntry |
|
| SEQUENCE |
|
|
|
| |
lpIlsFwdrTestElapsedTime |
Counter32 |
|
| |
lpIlsFwdrTestTimeRemaining |
Unsigned32 |
|
| |
lpIlsFwdrTestCauseOfTermination |
INTEGER |
|
| |
lpIlsFwdrTestFrmTx |
PassportCounter64 |
|
| |
lpIlsFwdrTestBitsTx |
PassportCounter64 |
|
| |
lpIlsFwdrTestFrmRx |
PassportCounter64 |
|
| |
lpIlsFwdrTestBitsRx |
PassportCounter64 |
|
| |
lpIlsFwdrTestErroredFrmRx |
PassportCounter64 |
|
| LpEth100RowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100RowStatus |
RowStatus |
|
| |
lpEth100ComponentName |
DisplayString |
|
| |
lpEth100StorageType |
StorageType |
|
| |
lpEth100Index |
Integer32 |
|
| LpEth100CidDataEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100CustomerIdentifier |
Unsigned32 |
|
| LpEth100IfEntryEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100IfAdminStatus |
INTEGER |
|
| |
lpEth100IfIndex |
InterfaceIndex |
|
| LpEth100ProvEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100DuplexMode |
INTEGER |
|
| |
lpEth100LineSpeed |
Unsigned32 |
|
| |
lpEth100AutoNegotiation |
INTEGER |
|
| |
lpEth100ApplicationFramerName |
Link |
|
| LpEth100AdminInfoEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100Vendor |
AsciiString |
|
| |
lpEth100CommentText |
AsciiString |
|
| LpEth100StateEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100AdminState |
INTEGER |
|
| |
lpEth100OperationalState |
INTEGER |
|
| |
lpEth100UsageState |
INTEGER |
|
| LpEth100OperStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100SnmpOperStatus |
INTEGER |
|
| LpEth100OperEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100MacAddress |
MacAddress |
|
| |
lpEth100AutoNegStatus |
INTEGER |
|
| |
lpEth100ActualLineSpeed |
Unsigned32 |
|
| |
lpEth100ActualDuplexMode |
INTEGER |
|
| LpEth100Eth100StatsEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100FramesTransmittedOk |
Counter32 |
|
| |
lpEth100FramesReceivedOk |
Counter32 |
|
| |
lpEth100OctetsTransmittedOk |
Counter32 |
|
| |
lpEth100OctetsReceivedOk |
Counter32 |
|
| |
lpEth100UndersizeFrames |
Counter32 |
|
| |
lpEth100ReceivedOctetsIntoRouterBr |
Counter32 |
|
| |
lpEth100ReceivedFramesIntoRouterBr |
Counter32 |
|
| LpEth100StatsEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100AlignmentErrors |
Counter32 |
|
| |
lpEth100FcsErrors |
Counter32 |
|
| |
lpEth100SingleCollisionFrames |
Counter32 |
|
| |
lpEth100MultipleCollisionFrames |
Counter32 |
|
| |
lpEth100SqeTestErrors |
Counter32 |
|
| |
lpEth100DeferredTransmissions |
Counter32 |
|
| |
lpEth100LateCollisions |
Counter32 |
|
| |
lpEth100ExcessiveCollisions |
Counter32 |
|
| |
lpEth100MacTransmitErrors |
Counter32 |
|
| |
lpEth100CarrierSenseErrors |
Counter32 |
|
| |
lpEth100FrameTooLongs |
Counter32 |
|
| |
lpEth100MacReceiveErrors |
Counter32 |
|
| LpEth100LtRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtRowStatus |
RowStatus |
|
| |
lpEth100LtComponentName |
DisplayString |
|
| |
lpEth100LtStorageType |
StorageType |
|
| |
lpEth100LtIndex |
NonReplicated |
|
| LpEth100LtFrmCmpRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtFrmCmpRowStatus |
RowStatus |
|
| |
lpEth100LtFrmCmpComponentName |
DisplayString |
|
| |
lpEth100LtFrmCmpStorageType |
StorageType |
|
| |
lpEth100LtFrmCmpIndex |
NonReplicated |
|
| LpEth100LtFrmCpyRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtFrmCpyRowStatus |
RowStatus |
|
| |
lpEth100LtFrmCpyComponentName |
DisplayString |
|
| |
lpEth100LtFrmCpyStorageType |
StorageType |
|
| |
lpEth100LtFrmCpyIndex |
NonReplicated |
|
| LpEth100LtPrtCfgRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtPrtCfgRowStatus |
RowStatus |
|
| |
lpEth100LtPrtCfgComponentName |
DisplayString |
|
| |
lpEth100LtPrtCfgStorageType |
StorageType |
|
| |
lpEth100LtPrtCfgIndex |
NonReplicated |
|
| LpEth100LtFbRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtFbRowStatus |
RowStatus |
|
| |
lpEth100LtFbComponentName |
DisplayString |
|
| |
lpEth100LtFbStorageType |
StorageType |
|
| |
lpEth100LtFbIndex |
NonReplicated |
|
| LpEth100LtFbTxInfoRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtFbTxInfoRowStatus |
RowStatus |
|
| |
lpEth100LtFbTxInfoComponentName |
DisplayString |
|
| |
lpEth100LtFbTxInfoStorageType |
StorageType |
|
| |
lpEth100LtFbTxInfoIndex |
NonReplicated |
|
| LpEth100LtFbFddiMacRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtFbFddiMacRowStatus |
RowStatus |
|
| |
lpEth100LtFbFddiMacComponentName |
DisplayString |
|
| |
lpEth100LtFbFddiMacStorageType |
StorageType |
|
| |
lpEth100LtFbFddiMacIndex |
NonReplicated |
|
| LpEth100LtFbMacEnetRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtFbMacEnetRowStatus |
RowStatus |
|
| |
lpEth100LtFbMacEnetComponentName |
DisplayString |
|
| |
lpEth100LtFbMacEnetStorageType |
StorageType |
|
| |
lpEth100LtFbMacEnetIndex |
NonReplicated |
|
| LpEth100LtFbMacTrRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtFbMacTrRowStatus |
RowStatus |
|
| |
lpEth100LtFbMacTrComponentName |
DisplayString |
|
| |
lpEth100LtFbMacTrStorageType |
StorageType |
|
| |
lpEth100LtFbMacTrIndex |
NonReplicated |
|
| LpEth100LtFbDataRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtFbDataRowStatus |
RowStatus |
|
| |
lpEth100LtFbDataComponentName |
DisplayString |
|
| |
lpEth100LtFbDataStorageType |
StorageType |
|
| |
lpEth100LtFbDataIndex |
NonReplicated |
|
| LpEth100LtFbIpHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtFbIpHRowStatus |
RowStatus |
|
| |
lpEth100LtFbIpHComponentName |
DisplayString |
|
| |
lpEth100LtFbIpHStorageType |
StorageType |
|
| |
lpEth100LtFbIpHIndex |
NonReplicated |
|
| LpEth100LtFbLlchRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtFbLlchRowStatus |
RowStatus |
|
| |
lpEth100LtFbLlchComponentName |
DisplayString |
|
| |
lpEth100LtFbLlchStorageType |
StorageType |
|
| |
lpEth100LtFbLlchIndex |
NonReplicated |
|
| LpEth100LtFbAppleHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtFbAppleHRowStatus |
RowStatus |
|
| |
lpEth100LtFbAppleHComponentName |
DisplayString |
|
| |
lpEth100LtFbAppleHStorageType |
StorageType |
|
| |
lpEth100LtFbAppleHIndex |
NonReplicated |
|
| LpEth100LtFbIpxHRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtFbIpxHRowStatus |
RowStatus |
|
| |
lpEth100LtFbIpxHComponentName |
DisplayString |
|
| |
lpEth100LtFbIpxHStorageType |
StorageType |
|
| |
lpEth100LtFbIpxHIndex |
NonReplicated |
|
| LpEth100LtCntlRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100LtCntlRowStatus |
RowStatus |
|
| |
lpEth100LtCntlComponentName |
DisplayString |
|
| |
lpEth100LtCntlStorageType |
StorageType |
|
| |
lpEth100LtCntlIndex |
NonReplicated |
|
| LpEth100TestRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100TestRowStatus |
RowStatus |
|
| |
lpEth100TestComponentName |
DisplayString |
|
| |
lpEth100TestStorageType |
StorageType |
|
| |
lpEth100TestIndex |
NonReplicated |
|
| LpEth100TestPTOEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100TestType |
INTEGER |
|
| |
lpEth100TestFrmSize |
Unsigned32 |
|
| |
lpEth100TestDuration |
Unsigned32 |
|
| LpEth100TestResultsEntry |
|
| SEQUENCE |
|
|
|
| |
lpEth100TestElapsedTime |
Counter32 |
|
| |
lpEth100TestTimeRemaining |
Unsigned32 |
|
| |
lpEth100TestCauseOfTermination |
INTEGER |
|
| |
lpEth100TestFrmTx |
PassportCounter64 |
|
| |
lpEth100TestBitsTx |
PassportCounter64 |
|
| |
lpEth100TestFrmRx |
PassportCounter64 |
|
| |
lpEth100TestBitsRx |
PassportCounter64 |
|
| |
lpEth100TestErroredFrmRx |
PassportCounter64 |
|
| LaRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
laRowStatus |
RowStatus |
|
| |
laComponentName |
DisplayString |
|
| |
laStorageType |
StorageType |
|
| |
laIndex |
Integer32 |
|
| LaCidDataEntry |
|
| SEQUENCE |
|
|
|
| |
laCustomerIdentifier |
Unsigned32 |
|
| LaIfEntryEntry |
|
| SEQUENCE |
|
|
|
| |
laIfAdminStatus |
INTEGER |
|
| |
laIfIndex |
InterfaceIndex |
|
| LaStateEntry |
|
| SEQUENCE |
|
|
|
| |
laAdminState |
INTEGER |
|
| |
laOperationalState |
INTEGER |
|
| |
laUsageState |
INTEGER |
|
| LaOperStatusEntry |
|
| SEQUENCE |
|
|
|
| |
laSnmpOperStatus |
INTEGER |
|
| LaFramerRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
laFramerRowStatus |
RowStatus |
|
| |
laFramerComponentName |
DisplayString |
|
| |
laFramerStorageType |
StorageType |
|
| |
laFramerIndex |
NonReplicated |
|
| LaFramerProvEntry |
|
| SEQUENCE |
|
|
|
| |
laFramerInterfaceName |
Link |
|
| LaFramerInterfaceNamesEntry |
|
| SEQUENCE |
|
|
|
| |
laFramerInterfaceNamesValue |
Link |
|
| |
laFramerInterfaceNamesRowStatus |
RowStatus |
|
Defined Values
| lpEnet |
1.3.6.1.4.1.562.2.4.1.12.3 |
| OBJECT IDENTIFIER |
|
|
|
| lpEnetRowStatusTable |
1.3.6.1.4.1.562.2.4.1.12.3.1 |
| This entry controls the addition and deletion of
lpEnet components. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetRowStatusEntry |
|
| lpEnetRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.1.1 |
| A single entry in the table represents a single
lpEnet component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetRowStatusEntry |
|
|
| lpEnetRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnet components.
These components can be added and deleted. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.1.1.4 |
| This variable represents the storage type value for the
lpEnet tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetIndex |
1.3.6.1.4.1.562.2.4.1.12.3.1.1.10 |
| This variable represents the index for the lpEnet tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..5 |
|
| lpEnetCidDataTable |
1.3.6.1.4.1.562.2.4.1.12.3.10 |
| This group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetCidDataEntry |
|
| lpEnetCidDataEntry |
1.3.6.1.4.1.562.2.4.1.12.3.10.1 |
| An entry in the lpEnetCidDataTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetCidDataEntry |
|
|
| lpEnetCustomerIdentifier |
1.3.6.1.4.1.562.2.4.1.12.3.10.1.1 |
| This attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0 | 1..8191 |
|
| lpEnetIfEntryTable |
1.3.6.1.4.1.562.2.4.1.12.3.11 |
| This group contains the provisionable attributes for the ifEntry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetIfEntryEntry |
|
| lpEnetIfEntryEntry |
1.3.6.1.4.1.562.2.4.1.12.3.11.1 |
| An entry in the lpEnetIfEntryTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetIfEntryEntry |
|
|
| lpEnetIfAdminStatus |
1.3.6.1.4.1.562.2.4.1.12.3.11.1.1 |
| The desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| lpEnetIfIndex |
1.3.6.1.4.1.562.2.4.1.12.3.11.1.2 |
| This is the index for the IfEntry. Its value is automatically initialized
during the provisioning process. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
InterfaceIndex |
1..65535 |
|
| lpEnetProvTable |
1.3.6.1.4.1.562.2.4.1.12.3.12 |
| This group contains provisioned attributes for the Ethernet component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetProvEntry |
|
| lpEnetProvEntry |
1.3.6.1.4.1.562.2.4.1.12.3.12.1 |
| An entry in the lpEnetProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetProvEntry |
|
|
| lpEnetHeartbeatPacket |
1.3.6.1.4.1.562.2.4.1.12.3.12.1.1 |
| The heartbeat packet feature is used to select whether or not the station
will generate a heartbeat packet. If enabled, the station will generate one
heartbeat packet every second. If disabled, the station will not generate
any heartbeat packets. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| lpEnetApplicationFramerName |
1.3.6.1.4.1.562.2.4.1.12.3.12.1.2 |
| This attribute contains the component name of a Framer which is
associated with the Ethernet component. This link is used by the
component administration system (CAS) to identify which card the
application component (associated with the Framer component) is to be
created. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Link |
|
|
| lpEnetAdminInfoTable |
1.3.6.1.4.1.562.2.4.1.12.3.13 |
| This group contains the attributes pertaining to the vendor of the
equipment. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetAdminInfoEntry |
|
| lpEnetAdminInfoEntry |
1.3.6.1.4.1.562.2.4.1.12.3.13.1 |
| An entry in the lpEnetAdminInfoTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetAdminInfoEntry |
|
|
| lpEnetVendor |
1.3.6.1.4.1.562.2.4.1.12.3.13.1.1 |
| This is the name of the vendor supplying the facility. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..20) |
|
| lpEnetStateTable |
1.3.6.1.4.1.562.2.4.1.12.3.15 |
| This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetStateEntry |
|
| lpEnetStateEntry |
1.3.6.1.4.1.562.2.4.1.12.3.15.1 |
| An entry in the lpEnetStateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetStateEntry |
|
|
| lpEnetAdminState |
1.3.6.1.4.1.562.2.4.1.12.3.15.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| lpEnetOperationalState |
1.3.6.1.4.1.562.2.4.1.12.3.15.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| lpEnetUsageState |
1.3.6.1.4.1.562.2.4.1.12.3.15.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| lpEnetOperStatusTable |
1.3.6.1.4.1.562.2.4.1.12.3.16 |
| This group includes the Operational Status attribute. This attribute
defines the current operational state of this component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetOperStatusEntry |
|
| lpEnetOperStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.16.1 |
| An entry in the lpEnetOperStatusTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetOperStatusEntry |
|
|
| lpEnetSnmpOperStatus |
1.3.6.1.4.1.562.2.4.1.12.3.16.1.1 |
| The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| lpEnetOperTable |
1.3.6.1.4.1.562.2.4.1.12.3.17 |
| This group contains the operational attributes of the Ethernet
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetOperEntry |
|
| lpEnetOperEntry |
1.3.6.1.4.1.562.2.4.1.12.3.17.1 |
| An entry in the lpEnetOperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetOperEntry |
|
|
| lpEnetMacAddress |
1.3.6.1.4.1.562.2.4.1.12.3.17.1.1 |
| The medium access controller (MAC) address is an address that is only
recognized by one station on the network The value of this attribute will
be assigned by the system. MAC address is displayed in canonical
format. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpEnetStatsTable |
1.3.6.1.4.1.562.2.4.1.12.3.18 |
| This group contains statistical attributes for the Ethernet component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetStatsEntry |
|
| lpEnetStatsEntry |
1.3.6.1.4.1.562.2.4.1.12.3.18.1 |
| An entry in the lpEnetStatsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetStatsEntry |
|
|
| lpEnetAlignmentErrors |
1.3.6.1.4.1.562.2.4.1.12.3.18.1.2 |
| The alignmentErrors counter indicates the number of frames received
which were not an integral number of octets in length. Frames will be
checked for alignmentErrors before they are checked for Frame Check
Sequence (FCS) errors. If there is an alignment error, the error will only
be counted here and not in fcsErrors. This counter will wrap around
after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEnetFcsErrors |
1.3.6.1.4.1.562.2.4.1.12.3.18.1.3 |
| The fcsErrors, Frame Check Sequence (FCS) error, counter indicates the
number of frames received which were an integral number of octets in
length and did not pass the FCS check. This counter will wrap around
after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEnetSingleCollisionFrames |
1.3.6.1.4.1.562.2.4.1.12.3.18.1.4 |
| The singleCollisionFrames counter indicates the number of frames
successfully transmitted which experienced exactly one collision. This
counter will wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEnetMultipleCollisionFrames |
1.3.6.1.4.1.562.2.4.1.12.3.18.1.5 |
| The multipleCollisionFrames counter indicates the number of frames
successfully transmitted which experienced more than one collision.
This counter will wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEnetSqeTestErrors |
1.3.6.1.4.1.562.2.4.1.12.3.18.1.6 |
| The sqeTestErrors, Signal Quality Error (SQE) Test errors, counter
indicates the number of times the 'SQE Test Error' message has been
generated for the station. This counter will wrap around after it reaches
its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEnetDeferredTransmissions |
1.3.6.1.4.1.562.2.4.1.12.3.18.1.7 |
| The deferredTransmissions counter indicates the number of frames
which experienced a transmission delay because the medium was busy.
This counter will wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEnetLateCollisions |
1.3.6.1.4.1.562.2.4.1.12.3.18.1.8 |
| The lateCollisions counter indicates the number of times a collision was
detected later than 512 bit-times into the transmission of a packet. This
counter will wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEnetExcessiveCollisions |
1.3.6.1.4.1.562.2.4.1.12.3.18.1.9 |
| The excessiveCollisions counter indicates the number of frames which
failed to get transmitted due to excessive collisions. This counter will
wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEnetMacTransmitErrors |
1.3.6.1.4.1.562.2.4.1.12.3.18.1.10 |
| The Medium Access Controller (MAC) transmit error counter indicates
the number of times that a transmission failed due to internal MAC
transmit errors. This counter will wrap around after it reaches its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEnetCarrierSenseErrors |
1.3.6.1.4.1.562.2.4.1.12.3.18.1.11 |
| The carrier sense error counter indicates the number of times that the
carrier sense condition was lost or never asserted when attempting to
transmit a frame. This counter will wrap around after it reaches its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEnetMacReceiveErrors |
1.3.6.1.4.1.562.2.4.1.12.3.18.1.13 |
| The Medium Access Controller (MAC) receive error counter indicates
the number of times a receive failed due to internal MAC receive errors.
This counter will wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEnetLt |
1.3.6.1.4.1.562.2.4.1.12.3.2 |
| OBJECT IDENTIFIER |
|
|
|
| lpEnetLtRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.1.1 |
| A single entry in the table represents a single
lpEnetLt component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtRowStatusEntry |
|
|
| lpEnetLtRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLt components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.1.1.4 |
| This variable represents the storage type value for the
lpEnetLt tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.1.1.10 |
| This variable represents the index for the lpEnetLt tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.20 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtTopEntry |
|
| lpEnetLtTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.20.1 |
| An entry in the lpEnetLtTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtTopEntry |
|
|
| lpEnetLtTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.20.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtFrmCmpRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.2.1.1 |
| A single entry in the table represents a single
lpEnetLtFrmCmp component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFrmCmpRowStatusEntry |
|
|
| lpEnetLtFrmCmpRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtFrmCmp components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtFrmCmpComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtFrmCmpStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.2.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtFrmCmp tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtFrmCmpIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.2.1.1.10 |
| This variable represents the index for the lpEnetLtFrmCmp tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtFrmCmpTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.2.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtFrmCmpTopEntry |
|
| lpEnetLtFrmCmpTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.2.10.1 |
| An entry in the lpEnetLtFrmCmpTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFrmCmpTopEntry |
|
|
| lpEnetLtFrmCmpTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.2.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtFrmCpyRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.3.1.1 |
| A single entry in the table represents a single
lpEnetLtFrmCpy component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFrmCpyRowStatusEntry |
|
|
| lpEnetLtFrmCpyRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtFrmCpy components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtFrmCpyComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtFrmCpyStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.3.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtFrmCpy tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtFrmCpyIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.3.1.1.10 |
| This variable represents the index for the lpEnetLtFrmCpy tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtFrmCpyTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.3.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtFrmCpyTopEntry |
|
| lpEnetLtFrmCpyTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.3.10.1 |
| An entry in the lpEnetLtFrmCpyTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFrmCpyTopEntry |
|
|
| lpEnetLtFrmCpyTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.3.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtPrtCfgRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.4.1.1 |
| A single entry in the table represents a single
lpEnetLtPrtCfg component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtPrtCfgRowStatusEntry |
|
|
| lpEnetLtPrtCfgRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.4.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtPrtCfg components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtPrtCfgComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.4.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtPrtCfgStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.4.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtPrtCfg tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtPrtCfgIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.4.1.1.10 |
| This variable represents the index for the lpEnetLtPrtCfg tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtPrtCfgTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.4.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtPrtCfgTopEntry |
|
| lpEnetLtPrtCfgTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.4.10.1 |
| An entry in the lpEnetLtPrtCfgTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtPrtCfgTopEntry |
|
|
| lpEnetLtPrtCfgTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.4.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtFb |
1.3.6.1.4.1.562.2.4.1.12.3.2.5 |
| OBJECT IDENTIFIER |
|
|
|
| lpEnetLtFbRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.1.1 |
| A single entry in the table represents a single
lpEnetLtFb component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbRowStatusEntry |
|
|
| lpEnetLtFbRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtFb components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtFbComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtFbStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtFb tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtFbIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.1.1.10 |
| This variable represents the index for the lpEnetLtFb tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtFbTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.20 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtFbTopEntry |
|
| lpEnetLtFbTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.20.1 |
| An entry in the lpEnetLtFbTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbTopEntry |
|
|
| lpEnetLtFbTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.20.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtFbTxInfoRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.1.1 |
| A single entry in the table represents a single
lpEnetLtFbTxInfo component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbTxInfoRowStatusEntry |
|
|
| lpEnetLtFbTxInfoRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtFbTxInfo components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtFbTxInfoComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtFbTxInfoStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtFbTxInfo tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtFbTxInfoIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.1.1.10 |
| This variable represents the index for the lpEnetLtFbTxInfo tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtFbTxInfoTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtFbTxInfoTopEntry |
|
| lpEnetLtFbTxInfoTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.10.1 |
| An entry in the lpEnetLtFbTxInfoTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbTxInfoTopEntry |
|
|
| lpEnetLtFbTxInfoTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.2.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtFbFddiMacRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.1.1 |
| A single entry in the table represents a single
lpEnetLtFbFddiMac component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbFddiMacRowStatusEntry |
|
|
| lpEnetLtFbFddiMacRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtFbFddiMac components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtFbFddiMacComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtFbFddiMacStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtFbFddiMac tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtFbFddiMacIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.1.1.10 |
| This variable represents the index for the lpEnetLtFbFddiMac tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtFbFddiMacTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.10.1 |
| An entry in the lpEnetLtFbFddiMacTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbFddiMacTopEntry |
|
|
| lpEnetLtFbFddiMacTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.3.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtFbMacEnetRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.1.1 |
| A single entry in the table represents a single
lpEnetLtFbMacEnet component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbMacEnetRowStatusEntry |
|
|
| lpEnetLtFbMacEnetRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtFbMacEnet components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtFbMacEnetComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtFbMacEnetStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtFbMacEnet tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtFbMacEnetIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.1.1.10 |
| This variable represents the index for the lpEnetLtFbMacEnet tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtFbMacEnetTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.10.1 |
| An entry in the lpEnetLtFbMacEnetTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbMacEnetTopEntry |
|
|
| lpEnetLtFbMacEnetTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.4.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtFbMacTrRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.1.1 |
| A single entry in the table represents a single
lpEnetLtFbMacTr component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbMacTrRowStatusEntry |
|
|
| lpEnetLtFbMacTrRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtFbMacTr components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtFbMacTrComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtFbMacTrStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtFbMacTr tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtFbMacTrIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.1.1.10 |
| This variable represents the index for the lpEnetLtFbMacTr tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtFbMacTrTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtFbMacTrTopEntry |
|
| lpEnetLtFbMacTrTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.10.1 |
| An entry in the lpEnetLtFbMacTrTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbMacTrTopEntry |
|
|
| lpEnetLtFbMacTrTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.5.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtFbDataRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.1.1 |
| A single entry in the table represents a single
lpEnetLtFbData component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbDataRowStatusEntry |
|
|
| lpEnetLtFbDataRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtFbData components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtFbDataComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtFbDataStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtFbData tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtFbDataIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.1.1.10 |
| This variable represents the index for the lpEnetLtFbData tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtFbDataTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtFbDataTopEntry |
|
| lpEnetLtFbDataTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.10.1 |
| An entry in the lpEnetLtFbDataTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbDataTopEntry |
|
|
| lpEnetLtFbDataTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.6.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtFbIpHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.1.1 |
| A single entry in the table represents a single
lpEnetLtFbIpH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbIpHRowStatusEntry |
|
|
| lpEnetLtFbIpHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtFbIpH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtFbIpHComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtFbIpHStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtFbIpH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtFbIpHIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.1.1.10 |
| This variable represents the index for the lpEnetLtFbIpH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtFbIpHTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtFbIpHTopEntry |
|
| lpEnetLtFbIpHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.10.1 |
| An entry in the lpEnetLtFbIpHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbIpHTopEntry |
|
|
| lpEnetLtFbIpHTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.7.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtFbLlchRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.1.1 |
| A single entry in the table represents a single
lpEnetLtFbLlch component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbLlchRowStatusEntry |
|
|
| lpEnetLtFbLlchRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtFbLlch components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtFbLlchComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtFbLlchStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtFbLlch tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtFbLlchIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.1.1.10 |
| This variable represents the index for the lpEnetLtFbLlch tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtFbLlchTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtFbLlchTopEntry |
|
| lpEnetLtFbLlchTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.10.1 |
| An entry in the lpEnetLtFbLlchTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbLlchTopEntry |
|
|
| lpEnetLtFbLlchTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.8.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtFbAppleHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.1.1 |
| A single entry in the table represents a single
lpEnetLtFbAppleH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbAppleHRowStatusEntry |
|
|
| lpEnetLtFbAppleHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtFbAppleH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtFbAppleHComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtFbAppleHStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtFbAppleH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtFbAppleHIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.1.1.10 |
| This variable represents the index for the lpEnetLtFbAppleH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtFbAppleHTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtFbAppleHTopEntry |
|
| lpEnetLtFbAppleHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.10.1 |
| An entry in the lpEnetLtFbAppleHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbAppleHTopEntry |
|
|
| lpEnetLtFbAppleHTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.9.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtFbIpxHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.1.1 |
| A single entry in the table represents a single
lpEnetLtFbIpxH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbIpxHRowStatusEntry |
|
|
| lpEnetLtFbIpxHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtFbIpxH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtFbIpxHComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtFbIpxHStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtFbIpxH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtFbIpxHIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.1.1.10 |
| This variable represents the index for the lpEnetLtFbIpxH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtFbIpxHTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtFbIpxHTopEntry |
|
| lpEnetLtFbIpxHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.10.1 |
| An entry in the lpEnetLtFbIpxHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtFbIpxHTopEntry |
|
|
| lpEnetLtFbIpxHTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.5.10.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetLtCntl |
1.3.6.1.4.1.562.2.4.1.12.3.2.6 |
| OBJECT IDENTIFIER |
|
|
|
| lpEnetLtCntlRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.6.1.1 |
| A single entry in the table represents a single
lpEnetLtCntl component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtCntlRowStatusEntry |
|
|
| lpEnetLtCntlRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.2.6.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetLtCntl components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetLtCntlComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.2.6.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetLtCntlStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.2.6.1.1.4 |
| This variable represents the storage type value for the
lpEnetLtCntl tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetLtCntlIndex |
1.3.6.1.4.1.562.2.4.1.12.3.2.6.1.1.10 |
| This variable represents the index for the lpEnetLtCntl tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetLtCntlTopTable |
1.3.6.1.4.1.562.2.4.1.12.3.2.6.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetLtCntlTopEntry |
|
| lpEnetLtCntlTopEntry |
1.3.6.1.4.1.562.2.4.1.12.3.2.6.10.1 |
| An entry in the lpEnetLtCntlTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetLtCntlTopEntry |
|
|
| lpEnetLtCntlTData |
1.3.6.1.4.1.562.2.4.1.12.3.2.6.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEnetTest |
1.3.6.1.4.1.562.2.4.1.12.3.5 |
| OBJECT IDENTIFIER |
|
|
|
| lpEnetTestRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.3.5.1.1 |
| A single entry in the table represents a single
lpEnetTest component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetTestRowStatusEntry |
|
|
| lpEnetTestRowStatus |
1.3.6.1.4.1.562.2.4.1.12.3.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEnetTest components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEnetTestComponentName |
1.3.6.1.4.1.562.2.4.1.12.3.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEnetTestStorageType |
1.3.6.1.4.1.562.2.4.1.12.3.5.1.1.4 |
| This variable represents the storage type value for the
lpEnetTest tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEnetTestIndex |
1.3.6.1.4.1.562.2.4.1.12.3.5.1.1.10 |
| This variable represents the index for the lpEnetTest tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEnetTestPTOTable |
1.3.6.1.4.1.562.2.4.1.12.3.5.10 |
| This group contains the operational data for the LanPortTest
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetTestPTOEntry |
|
| lpEnetTestPTOEntry |
1.3.6.1.4.1.562.2.4.1.12.3.5.10.1 |
| An entry in the lpEnetTestPTOTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetTestPTOEntry |
|
|
| lpEnetTestType |
1.3.6.1.4.1.562.2.4.1.12.3.5.10.1.1 |
| This attribute is the type of test to be run. The available test types
include the following: card test sets up an internal loop on the board
and runs a bit error rate test; manual test assumes the line is looped
back externally and a bit error rate test is performed; localLoop test
loops back the local modem and performs a bit error rate test;
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test; externalLoop test loops back the line
to the far end; payloadLoop test only loops back the payload data
received from the incoming line; Note that localLoop, remoteLoop
and payloadLoop are not supported by all function processors. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) |
|
| lpEnetTestFrmSize |
1.3.6.1.4.1.562.2.4.1.12.3.5.10.1.2 |
| This attribute defines the size of the test data frames in number of
bytes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
4..4096 |
|
| lpEnetTestDuration |
1.3.6.1.4.1.562.2.4.1.12.3.5.10.1.3 |
| This attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..30240 |
|
| lpEnetTestResultsTable |
1.3.6.1.4.1.562.2.4.1.12.3.5.11 |
| This group contains all the statistics related attributes of the Test
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEnetTestResultsEntry |
|
| lpEnetTestResultsEntry |
1.3.6.1.4.1.562.2.4.1.12.3.5.11.1 |
| An entry in the lpEnetTestResultsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEnetTestResultsEntry |
|
|
| lpEnetTestElapsedTime |
1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.4 |
| This attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEnetTestTimeRemaining |
1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.5 |
| This attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| lpEnetTestCauseOfTermination |
1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.6 |
| This attribute records the reason the test is terminated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) |
|
| lpEnetTestFrmTx |
1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.7 |
| This attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpEnetTestBitsTx |
1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.8 |
| This attribute is the total number of bits sent during the test period.
This counter is not expected to reach its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpEnetTestFrmRx |
1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.9 |
| This attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpEnetTestBitsRx |
1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.10 |
| This attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpEnetTestErroredFrmRx |
1.3.6.1.4.1.562.2.4.1.12.3.5.11.1.11 |
| This attribute is the total number of errored frames received during
the test period. This counter is not expected to reach its maximum
value. The counter will wrap around to 0 if it does reach its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpFi |
1.3.6.1.4.1.562.2.4.1.12.4 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiRowStatusTable |
1.3.6.1.4.1.562.2.4.1.12.4.1 |
| This entry controls the addition and deletion of
lpFi components. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiRowStatusEntry |
|
| lpFiRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.1.1 |
| A single entry in the table represents a single
lpFi component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiRowStatusEntry |
|
|
| lpFiRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFi components.
These components can be added and deleted. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.1.1.4 |
| This variable represents the storage type value for the
lpFi tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiIndex |
1.3.6.1.4.1.562.2.4.1.12.4.1.1.10 |
| This variable represents the index for the lpFi tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0 |
|
| lpFiCidDataTable |
1.3.6.1.4.1.562.2.4.1.12.4.10 |
| This group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiCidDataEntry |
|
| lpFiCidDataEntry |
1.3.6.1.4.1.562.2.4.1.12.4.10.1 |
| An entry in the lpFiCidDataTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiCidDataEntry |
|
|
| lpFiCustomerIdentifier |
1.3.6.1.4.1.562.2.4.1.12.4.10.1.1 |
| This attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0 | 1..8191 |
|
| lpFiIfEntryTable |
1.3.6.1.4.1.562.2.4.1.12.4.11 |
| This group contains the provisionable attributes for the ifEntry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiIfEntryEntry |
|
| lpFiIfEntryEntry |
1.3.6.1.4.1.562.2.4.1.12.4.11.1 |
| An entry in the lpFiIfEntryTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiIfEntryEntry |
|
|
| lpFiIfAdminStatus |
1.3.6.1.4.1.562.2.4.1.12.4.11.1.1 |
| The desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| lpFiIfIndex |
1.3.6.1.4.1.562.2.4.1.12.4.11.1.2 |
| This is the index for the IfEntry. Its value is automatically initialized
during the provisioning process. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
InterfaceIndex |
1..65535 |
|
| lpFiSmtProvTable |
1.3.6.1.4.1.562.2.4.1.12.4.12 |
| This group contains the provisionable Station Management (SMT)
attributes of the Fddi component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiSmtProvEntry |
|
| lpFiSmtProvEntry |
1.3.6.1.4.1.562.2.4.1.12.4.12.1 |
| An entry in the lpFiSmtProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiSmtProvEntry |
|
|
| lpFiUserData |
1.3.6.1.4.1.562.2.4.1.12.4.12.1.1 |
| The user data field is used to identify the FDDI interface on the ring.
The user data contains a message with a maximum of 32 characters. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..32) |
|
| lpFiAcceptAa |
1.3.6.1.4.1.562.2.4.1.12.4.12.1.2 |
| The acceptAa attribute defines the station type A to station type A
connection policy. If enabled, the connection will be accepted. If
disabled, the connection will be rejected. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| lpFiAcceptBb |
1.3.6.1.4.1.562.2.4.1.12.4.12.1.3 |
| The acceptBb attribute defines the station type B to station type B
connection policy. If enabled, the connection will be accepted. If
disabled, the connection will be rejected. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| lpFiAcceptAs |
1.3.6.1.4.1.562.2.4.1.12.4.12.1.4 |
| The acceptAs attribute defines the station type A to station type S
connection policy. If enabled, the connection will be accepted. If
disabled, the connection will be rejected. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| lpFiAcceptBs |
1.3.6.1.4.1.562.2.4.1.12.4.12.1.5 |
| The acceptBs attribute defines the station type B to station type S
connection policy. If enabled, the connection will be accepted. If
disabled, the connection will be rejected. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| lpFiAcceptAm |
1.3.6.1.4.1.562.2.4.1.12.4.12.1.6 |
| The acceptAm attribute defines the station type A to station type M
connection policy. If enabled, the connection will be accepted. If
disabled, the connection will be rejected. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| lpFiAcceptBm |
1.3.6.1.4.1.562.2.4.1.12.4.12.1.7 |
| The acceptBm attribute defines the station type B to station type M
connection policy. If enabled, the connection will be accepted. If
disabled, the connection will be rejected. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| lpFiUseThruBa |
1.3.6.1.4.1.562.2.4.1.12.4.12.1.8 |
| The useThruBa attribute is used to configure the requested path of the
associated station. If enabled, only the secondary preferred path is
permitted. If disabled, only the primary preferred path is permitted. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| lpFiNeighborNotifyInterval |
1.3.6.1.4.1.562.2.4.1.12.4.12.1.10 |
| The neighborNotifyInterval attribute contains the amount of time,
expressed in seconds, between neighbor notification frames. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
2..30 |
|
| lpFiStatusReportPolicy |
1.3.6.1.4.1.562.2.4.1.12.4.12.1.11 |
| The statusReportPolicy attribute indicates whether or not the station will
generate status reporting frames for its implemented events and
conditions. If true, the station will generate the status frames. If false,
the station will not generate the status frames. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2) |
|
| lpFiTraceMaxExpirationTimer |
1.3.6.1.4.1.562.2.4.1.12.4.12.1.12 |
| The traceMaxExpirationTimer attribute is used to configure the
maximum propagation time, expressed in milliseconds, for a trace on a
FDDI topology. This value places a lower bound on the detection time
for an unrecovered ring. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
FddiTimeMilli |
0..1000000 |
|
| lpFiApplicationFramerName |
1.3.6.1.4.1.562.2.4.1.12.4.12.1.13 |
| This attribute contains the component name of a Framer which is
associated with the Fddi component. This defines which
LanApplication/n Framer will be using this Fddi interface. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Link |
|
|
| lpFiMacProvTable |
1.3.6.1.4.1.562.2.4.1.12.4.13 |
| This group contains the provisionable MAC attributes of the Fddi
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiMacProvEntry |
|
| lpFiMacProvEntry |
1.3.6.1.4.1.562.2.4.1.12.4.13.1 |
| An entry in the lpFiMacProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiMacProvEntry |
|
|
| lpFiTokenRequestTimer |
1.3.6.1.4.1.562.2.4.1.12.4.13.1.1 |
| The tokenRequestTimer value contains the token request value assigned
to the associated medium access controller (MAC).
Warning:
Changes to this attribute can have adverse effects on the performance of
the FDDI ring. Therefore it is recommended that this parameter only be
modified by personnel with a thorough understanding of the
consequences that may result from changes to this attribute. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
FddiTimeNano |
20480..1340000000 |
|
| lpFiTokenMaxTimer |
1.3.6.1.4.1.562.2.4.1.12.4.13.1.2 |
| The tokenMaxTimer value is the maximum timer value the negotiated
token rotation time may assume.
Warning:
Changes to this attribute can have adverse effects on the performance of
the FDDI ring. Therefore it is recommended that this parameter only be
modified by personnel with a thorough understanding of the
consequences that may result from changes to this attribute. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
FddiTimeNano |
40960..1342200000 |
|
| lpFiValidTransmissionTimer |
1.3.6.1.4.1.562.2.4.1.12.4.13.1.3 |
| The validTransmissionTimer (Tvx) value specifies the amount of time
required for a valid transmission. The station must receive a valid
transmission once every Tvx.
Warning:
Changes to this attribute can have adverse effects on the performance of
the FDDI ring. Therefore it is recommended that this parameter only be
modified by personnel with a thorough understanding of the
consequences that may result from changes to this attribute. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
FddiTimeNano |
40960..1342200000 |
|
| lpFiAdminInfoTable |
1.3.6.1.4.1.562.2.4.1.12.4.14 |
| This group contains the attributes pertaining to the vendor of the
equipment. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiAdminInfoEntry |
|
| lpFiAdminInfoEntry |
1.3.6.1.4.1.562.2.4.1.12.4.14.1 |
| An entry in the lpFiAdminInfoTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiAdminInfoEntry |
|
|
| lpFiVendor |
1.3.6.1.4.1.562.2.4.1.12.4.14.1.1 |
| This is the name of the vendor supplying the facility. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..20) |
|
| lpFiStateTable |
1.3.6.1.4.1.562.2.4.1.12.4.16 |
| This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiStateEntry |
|
| lpFiStateEntry |
1.3.6.1.4.1.562.2.4.1.12.4.16.1 |
| An entry in the lpFiStateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiStateEntry |
|
|
| lpFiAdminState |
1.3.6.1.4.1.562.2.4.1.12.4.16.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| lpFiOperationalState |
1.3.6.1.4.1.562.2.4.1.12.4.16.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| lpFiUsageState |
1.3.6.1.4.1.562.2.4.1.12.4.16.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| lpFiOperStatusTable |
1.3.6.1.4.1.562.2.4.1.12.4.17 |
| This group includes the Operational Status attribute. This attribute
defines the current operational state of this component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiOperStatusEntry |
|
| lpFiOperStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.17.1 |
| An entry in the lpFiOperStatusTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiOperStatusEntry |
|
|
| lpFiSnmpOperStatus |
1.3.6.1.4.1.562.2.4.1.12.4.17.1.1 |
| The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| lpFiSmtOperTable |
1.3.6.1.4.1.562.2.4.1.12.4.18 |
| This group contains the operational station management (SMT)
attributes of the Fddi component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiSmtOperEntry |
|
| lpFiSmtOperEntry |
1.3.6.1.4.1.562.2.4.1.12.4.18.1 |
| An entry in the lpFiSmtOperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiSmtOperEntry |
|
|
| lpFiVersion |
1.3.6.1.4.1.562.2.4.1.12.4.18.1.1 |
| The version attribute contains a copy of the currently supported version
numbers of the management information base (MIB) and the station
management (SMT). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..32) |
|
| lpFiBypassPresent |
1.3.6.1.4.1.562.2.4.1.12.4.18.1.14 |
| The bypassPresent attribute indicates whether the optical bypass switch
is present on its AB port pair. If true, the optical bypass switch is
present. If false, it is not present. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2) |
|
| lpFiEcmState |
1.3.6.1.4.1.562.2.4.1.12.4.18.1.15 |
| The ecmState, Entity Coordination Manager (ECM), state indicates the
current state of the ECM state machine. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
out(1), in(2), trace(3), leave(4), pathTest(5), insert(6), check(7), deinsert(8) |
|
| lpFiCfState |
1.3.6.1.4.1.562.2.4.1.12.4.18.1.16 |
| The cfState attribute indicates the current state of the configuration
management (CFM) state machine. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
isolated(1), localA(2), localB(3), localAB(4), localS(5), wrapA(6), wrapB(7), wrapAB(8), wrapS(9), cWrapA(10), cWrapB(11), cWrapS(12), thru(13) |
|
| lpFiMacOperTable |
1.3.6.1.4.1.562.2.4.1.12.4.19 |
| This group contains the operational Medium Access Controller (MAC)
attributes of the of the Fddi component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiMacOperEntry |
|
| lpFiMacOperEntry |
1.3.6.1.4.1.562.2.4.1.12.4.19.1 |
| An entry in the lpFiMacOperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiMacOperEntry |
|
|
| lpFiRingLatency |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.1 |
| The ringLatency attribute contains the measured ring latency of the ring
the station is attached to. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
1280..1342000000 |
|
| lpFiMacAddress |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.10 |
| The medium access controller (MAC) address is an address that is
recognized by only one station on the attached ring. The value of this
attribute is assigned by the system. This attribute is displayed in
canonical format. The non-canonical version of this address is indicated
in ncMacAddress. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
FddiMACLongAddressType |
Size(6) |
|
| lpFiUpstreamNeighbor |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.11 |
| The upstreamNeighbor attribute contains the MAC address associated
with the upstream neighbor station on the ring. This attribute is
displayed in canonical format. The non-canonical version of this address
is indicated in ncUpstreamNeighbor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
FddiMACLongAddressType |
Size(6) |
|
| lpFiDownstreamNeighbor |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.12 |
| The downstreamNeighbor attribute contains the MAC address
associated with the downstream station on the ring. This attribute is
displayed in canonical format. The non-canonical version of this address
is indicated in ncDownstreamNeighbor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
FddiMACLongAddressType |
Size(6) |
|
| lpFiOldUpstreamNeighbor |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.13 |
| The oldUpstreamNeighbor attribute contains the previous value of the
MAC address associated with the upstream station on the ring. This
attribute is displayed in canonical format. The non-canonical version of
this address is indicated in ncOldUpstreamNeighbor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
FddiMACLongAddressType |
Size(6) |
|
| lpFiOldDownstreamNeighbor |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.14 |
| The oldDownstreamNeighbor attribute contains the previous value of
the MAC address associated with the downstream station on the ring.
This attribute is displayed in canonical format. The non-canonical
version of this address is indicated in ncOldDownstreamNeighbor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
FddiMACLongAddressType |
Size(6) |
|
| lpFiDupAddressTest |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.15 |
| The dupAddressTest attribute indicates the condition results of the
duplicate address test. If notDone, the test has not been executed. If
pass, the test has successfully executed. If fail, the test has failed. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notDone(1), pass(2), fail(3) |
|
| lpFiTokenNegotiatedTimer |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.18 |
| The tokenNegotiatedTimer specifies the negotiated token rotation time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
FddiTimeNano |
80..1340000000 |
|
| lpFiFrameCounts |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.19 |
| The frameCounts attribute contains the number of frames that have been
received by the station. This counter will wrap around after it reaches its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiCopiedCounts |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.20 |
| The copiedCounts attribute contains the number of frames successfully
copied into this station's receive buffers, not including MAC control
frames. This counter will wrap around after it reaches its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiTransmitCounts |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.21 |
| The transmitCounts attribute contains the number of frames transmitted
by this station, not including MAC control frames. This counter will
wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiErrorCounts |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.22 |
| The errorCounts attribute contains the number of error frames first
detected by this station. This counter will wrap around after it reaches its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiLostCounts |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.23 |
| The lostCounts attribute contains the number of instances that the station
has detected a format error during frame reception such that the frame
was stripped. This counter will wrap around after it reaches its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiRmtState |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.25 |
| The rmtState, ring management (RMT), state indicates the current state
of the RMT state machine. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
isolated(1), nonOp(2), ringOp(3), detect(4), nonOpDup(5), ringOpDup(6), directed(7), trace(8) |
|
| lpFiFrameErrorFlag |
1.3.6.1.4.1.562.2.4.1.12.4.19.1.28 |
| The frameErrorFlag attribute indicates the MAC frame error condition
status. If true, a MAC frame error is present. If false, a MAC frame
error condition is not present. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2) |
|
| lpFiMacCOperTable |
1.3.6.1.4.1.562.2.4.1.12.4.20 |
| This group contains the operational attributes of the Medium Access
Controller (MAC) Counters Table of the Fddi component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiMacCOperEntry |
|
| lpFiMacCOperEntry |
1.3.6.1.4.1.562.2.4.1.12.4.20.1 |
| An entry in the lpFiMacCOperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiMacCOperEntry |
|
|
| lpFiTokenCounts |
1.3.6.1.4.1.562.2.4.1.12.4.20.1.1 |
| The tokenCounts attribute contains the number of times the station has
received a token. This counter will wrap around after it reaches its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiTvxExpiredCounts |
1.3.6.1.4.1.562.2.4.1.12.4.20.1.2 |
| The tvxExpiredCounts, Transmission Valid eXpired (TVX), attribute
contains the number of times that TVX timer has expired. This counter
may increment as stations go on and off the ring. A rapidly increasing
value may indicate a problem. This counter will wrap around after it
reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiNotCopiedCounts |
1.3.6.1.4.1.562.2.4.1.12.4.20.1.3 |
| The notCopiedCounts attribute contains the number of times that the
station has detected a frame addressed to itself but did not copy it due to
local buffer congestion. This counter will wrap around after it reaches its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiLateCounts |
1.3.6.1.4.1.562.2.4.1.12.4.20.1.4 |
| The lateCounts attribute contains the number of token rotation time
(TRT) expirations since the station was reset or a token was received.
This counter may increment as stations go on and off the ring. A rapidly
increasing value may indicate a problem. This counter will wrap around
after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiRingOpCounts |
1.3.6.1.4.1.562.2.4.1.12.4.20.1.5 |
| The ringOpCounts attribute contains the number of times the station has
made the transition from the ring not operational state to the ring
operational state. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiNcMacOperTable |
1.3.6.1.4.1.562.2.4.1.12.4.26 |
| This group contains the operational attributes of the Fddi component
related to non-canonical MAC addresses. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiNcMacOperEntry |
|
| lpFiNcMacOperEntry |
1.3.6.1.4.1.562.2.4.1.12.4.26.1 |
| An entry in the lpFiNcMacOperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiNcMacOperEntry |
|
|
| lpFiNcMacAddress |
1.3.6.1.4.1.562.2.4.1.12.4.26.1.1 |
| The medium access controller (MAC) address is an address that is
recognized by only one station on the attached ring. The value of this
attribute is assigned by the system. This attribute is displayed in non-
canonical format. The canonical version of this address is indicated in
macAddress. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpFiNcUpstreamNeighbor |
1.3.6.1.4.1.562.2.4.1.12.4.26.1.2 |
| The ncUpstreamNeighbor attribute contains the MAC address
associated with the upstream neighbor station on the ring. This attribute
is displayed in non-canonical format. The canonical version of this
address is indicated in upstreamNeighbor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpFiNcDownstreamNeighbor |
1.3.6.1.4.1.562.2.4.1.12.4.26.1.3 |
| The ncDownstreamNeighbor attribute contains the MAC address
associated with the downstream station on the ring. This attribute is
displayed in non-canonical format. The canonical version of this address
is indicated in downstreamNeighbor |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpFiNcOldUpstreamNeighbor |
1.3.6.1.4.1.562.2.4.1.12.4.26.1.4 |
| The ncOldUpstreamNeighbor attribute contains the previous value of the
MAC address associated with the upstream station on the ring. This
attribute is displayed in non-canonical format. The canonical version of
this address is indicated in oldUpstreamNeighbor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpFiNcOldDownstreamNeighbor |
1.3.6.1.4.1.562.2.4.1.12.4.26.1.5 |
| The ncOldDownstreamNeighbor attribute contains the previous value of
the MAC address associated with the downstream station on the ring.
This attribute is displayed in non-canonical format. The canonical
version of this address is indicated in oldDownstreamNeighbor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpFiLt |
1.3.6.1.4.1.562.2.4.1.12.4.2 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiLtRowStatusTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.1 |
| This entry controls the addition and deletion of
lpFiLt components. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtRowStatusEntry |
|
| lpFiLtRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.1.1 |
| A single entry in the table represents a single
lpFiLt component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtRowStatusEntry |
|
|
| lpFiLtRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLt components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.1.1.4 |
| This variable represents the storage type value for the
lpFiLt tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.1.1.10 |
| This variable represents the index for the lpFiLt tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.20 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtTopEntry |
|
| lpFiLtTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.20.1 |
| An entry in the lpFiLtTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtTopEntry |
|
|
| lpFiLtTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.20.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtFrmCmp |
1.3.6.1.4.1.562.2.4.1.12.4.2.2 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiLtFrmCmpRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.2.1.1 |
| A single entry in the table represents a single
lpFiLtFrmCmp component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFrmCmpRowStatusEntry |
|
|
| lpFiLtFrmCmpRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtFrmCmp components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtFrmCmpComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtFrmCmpStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.2.1.1.4 |
| This variable represents the storage type value for the
lpFiLtFrmCmp tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtFrmCmpIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.2.1.1.10 |
| This variable represents the index for the lpFiLtFrmCmp tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtFrmCmpTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.2.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtFrmCmpTopEntry |
|
| lpFiLtFrmCmpTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.2.10.1 |
| An entry in the lpFiLtFrmCmpTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFrmCmpTopEntry |
|
|
| lpFiLtFrmCmpTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.2.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtFrmCpy |
1.3.6.1.4.1.562.2.4.1.12.4.2.3 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiLtFrmCpyRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.3.1.1 |
| A single entry in the table represents a single
lpFiLtFrmCpy component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFrmCpyRowStatusEntry |
|
|
| lpFiLtFrmCpyRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtFrmCpy components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtFrmCpyComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtFrmCpyStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.3.1.1.4 |
| This variable represents the storage type value for the
lpFiLtFrmCpy tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtFrmCpyIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.3.1.1.10 |
| This variable represents the index for the lpFiLtFrmCpy tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtFrmCpyTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.3.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtFrmCpyTopEntry |
|
| lpFiLtFrmCpyTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.3.10.1 |
| An entry in the lpFiLtFrmCpyTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFrmCpyTopEntry |
|
|
| lpFiLtFrmCpyTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.3.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtPrtCfg |
1.3.6.1.4.1.562.2.4.1.12.4.2.4 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiLtPrtCfgRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.4.1.1 |
| A single entry in the table represents a single
lpFiLtPrtCfg component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtPrtCfgRowStatusEntry |
|
|
| lpFiLtPrtCfgRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.4.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtPrtCfg components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtPrtCfgComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.4.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtPrtCfgStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.4.1.1.4 |
| This variable represents the storage type value for the
lpFiLtPrtCfg tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtPrtCfgIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.4.1.1.10 |
| This variable represents the index for the lpFiLtPrtCfg tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtPrtCfgTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.4.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtPrtCfgTopEntry |
|
| lpFiLtPrtCfgTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.4.10.1 |
| An entry in the lpFiLtPrtCfgTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtPrtCfgTopEntry |
|
|
| lpFiLtPrtCfgTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.4.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtFb |
1.3.6.1.4.1.562.2.4.1.12.4.2.5 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiLtFbRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.1.1 |
| A single entry in the table represents a single
lpFiLtFb component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbRowStatusEntry |
|
|
| lpFiLtFbRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtFb components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtFbComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtFbStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.1.1.4 |
| This variable represents the storage type value for the
lpFiLtFb tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtFbIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.1.1.10 |
| This variable represents the index for the lpFiLtFb tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtFbTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.20 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtFbTopEntry |
|
| lpFiLtFbTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.20.1 |
| An entry in the lpFiLtFbTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbTopEntry |
|
|
| lpFiLtFbTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.20.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtFbTxInfoRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.1.1 |
| A single entry in the table represents a single
lpFiLtFbTxInfo component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbTxInfoRowStatusEntry |
|
|
| lpFiLtFbTxInfoRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtFbTxInfo components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtFbTxInfoComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtFbTxInfoStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.1.1.4 |
| This variable represents the storage type value for the
lpFiLtFbTxInfo tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtFbTxInfoIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.1.1.10 |
| This variable represents the index for the lpFiLtFbTxInfo tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtFbTxInfoTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtFbTxInfoTopEntry |
|
| lpFiLtFbTxInfoTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.10.1 |
| An entry in the lpFiLtFbTxInfoTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbTxInfoTopEntry |
|
|
| lpFiLtFbTxInfoTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.2.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtFbFddiMacRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.1.1 |
| A single entry in the table represents a single
lpFiLtFbFddiMac component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbFddiMacRowStatusEntry |
|
|
| lpFiLtFbFddiMacRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtFbFddiMac components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtFbFddiMacComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtFbFddiMacStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.1.1.4 |
| This variable represents the storage type value for the
lpFiLtFbFddiMac tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtFbFddiMacIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.1.1.10 |
| This variable represents the index for the lpFiLtFbFddiMac tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtFbFddiMacTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtFbFddiMacTopEntry |
|
| lpFiLtFbFddiMacTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.10.1 |
| An entry in the lpFiLtFbFddiMacTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbFddiMacTopEntry |
|
|
| lpFiLtFbFddiMacTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.3.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtFbMacEnetRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.1.1 |
| A single entry in the table represents a single
lpFiLtFbMacEnet component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbMacEnetRowStatusEntry |
|
|
| lpFiLtFbMacEnetRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtFbMacEnet components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtFbMacEnetComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtFbMacEnetStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.1.1.4 |
| This variable represents the storage type value for the
lpFiLtFbMacEnet tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtFbMacEnetIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.1.1.10 |
| This variable represents the index for the lpFiLtFbMacEnet tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtFbMacEnetTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtFbMacEnetTopEntry |
|
| lpFiLtFbMacEnetTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.10.1 |
| An entry in the lpFiLtFbMacEnetTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbMacEnetTopEntry |
|
|
| lpFiLtFbMacEnetTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.4.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtFbMacTrRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.1.1 |
| A single entry in the table represents a single
lpFiLtFbMacTr component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbMacTrRowStatusEntry |
|
|
| lpFiLtFbMacTrRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtFbMacTr components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtFbMacTrComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtFbMacTrStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.1.1.4 |
| This variable represents the storage type value for the
lpFiLtFbMacTr tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtFbMacTrIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.1.1.10 |
| This variable represents the index for the lpFiLtFbMacTr tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtFbMacTrTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtFbMacTrTopEntry |
|
| lpFiLtFbMacTrTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.10.1 |
| An entry in the lpFiLtFbMacTrTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbMacTrTopEntry |
|
|
| lpFiLtFbMacTrTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.5.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtFbData |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.6 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiLtFbDataRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.1.1 |
| A single entry in the table represents a single
lpFiLtFbData component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbDataRowStatusEntry |
|
|
| lpFiLtFbDataRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtFbData components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtFbDataComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtFbDataStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.1.1.4 |
| This variable represents the storage type value for the
lpFiLtFbData tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtFbDataIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.1.1.10 |
| This variable represents the index for the lpFiLtFbData tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtFbDataTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtFbDataTopEntry |
|
| lpFiLtFbDataTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.10.1 |
| An entry in the lpFiLtFbDataTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbDataTopEntry |
|
|
| lpFiLtFbDataTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.6.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtFbIpH |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.7 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiLtFbIpHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.1.1 |
| A single entry in the table represents a single
lpFiLtFbIpH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbIpHRowStatusEntry |
|
|
| lpFiLtFbIpHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtFbIpH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtFbIpHComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtFbIpHStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.1.1.4 |
| This variable represents the storage type value for the
lpFiLtFbIpH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtFbIpHIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.1.1.10 |
| This variable represents the index for the lpFiLtFbIpH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtFbIpHTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtFbIpHTopEntry |
|
| lpFiLtFbIpHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.10.1 |
| An entry in the lpFiLtFbIpHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbIpHTopEntry |
|
|
| lpFiLtFbIpHTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.7.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtFbLlch |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.8 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiLtFbLlchRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.1.1 |
| A single entry in the table represents a single
lpFiLtFbLlch component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbLlchRowStatusEntry |
|
|
| lpFiLtFbLlchRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtFbLlch components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtFbLlchComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtFbLlchStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.1.1.4 |
| This variable represents the storage type value for the
lpFiLtFbLlch tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtFbLlchIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.1.1.10 |
| This variable represents the index for the lpFiLtFbLlch tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtFbLlchTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtFbLlchTopEntry |
|
| lpFiLtFbLlchTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.10.1 |
| An entry in the lpFiLtFbLlchTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbLlchTopEntry |
|
|
| lpFiLtFbLlchTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.8.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtFbAppleHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.1.1 |
| A single entry in the table represents a single
lpFiLtFbAppleH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbAppleHRowStatusEntry |
|
|
| lpFiLtFbAppleHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtFbAppleH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtFbAppleHComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtFbAppleHStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.1.1.4 |
| This variable represents the storage type value for the
lpFiLtFbAppleH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtFbAppleHIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.1.1.10 |
| This variable represents the index for the lpFiLtFbAppleH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtFbAppleHTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtFbAppleHTopEntry |
|
| lpFiLtFbAppleHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.10.1 |
| An entry in the lpFiLtFbAppleHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbAppleHTopEntry |
|
|
| lpFiLtFbAppleHTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.9.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtFbIpxH |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.10 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiLtFbIpxHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.1.1 |
| A single entry in the table represents a single
lpFiLtFbIpxH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbIpxHRowStatusEntry |
|
|
| lpFiLtFbIpxHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtFbIpxH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtFbIpxHComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtFbIpxHStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.1.1.4 |
| This variable represents the storage type value for the
lpFiLtFbIpxH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtFbIpxHIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.1.1.10 |
| This variable represents the index for the lpFiLtFbIpxH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtFbIpxHTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtFbIpxHTopEntry |
|
| lpFiLtFbIpxHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.10.1 |
| An entry in the lpFiLtFbIpxHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtFbIpxHTopEntry |
|
|
| lpFiLtFbIpxHTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.5.10.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiLtCntl |
1.3.6.1.4.1.562.2.4.1.12.4.2.6 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiLtCntlRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.6.1.1 |
| A single entry in the table represents a single
lpFiLtCntl component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtCntlRowStatusEntry |
|
|
| lpFiLtCntlRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.2.6.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiLtCntl components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiLtCntlComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.2.6.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiLtCntlStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.2.6.1.1.4 |
| This variable represents the storage type value for the
lpFiLtCntl tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiLtCntlIndex |
1.3.6.1.4.1.562.2.4.1.12.4.2.6.1.1.10 |
| This variable represents the index for the lpFiLtCntl tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiLtCntlTopTable |
1.3.6.1.4.1.562.2.4.1.12.4.2.6.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiLtCntlTopEntry |
|
| lpFiLtCntlTopEntry |
1.3.6.1.4.1.562.2.4.1.12.4.2.6.10.1 |
| An entry in the lpFiLtCntlTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiLtCntlTopEntry |
|
|
| lpFiLtCntlTData |
1.3.6.1.4.1.562.2.4.1.12.4.2.6.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpFiPhy |
1.3.6.1.4.1.562.2.4.1.12.4.3 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiPhyRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.3.1.1 |
| A single entry in the table represents a single
lpFiPhy component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiPhyRowStatusEntry |
|
|
| lpFiPhyRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiPhy components.
These components can be added. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiPhyComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiPhyStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.3.1.1.4 |
| This variable represents the storage type value for the
lpFiPhy tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiPhyFddiPhyTypeIndex |
1.3.6.1.4.1.562.2.4.1.12.4.3.1.1.10 |
| This variable represents the index for the lpFiPhy tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
a(0), b(1) |
|
| lpFiPhyProvTable |
1.3.6.1.4.1.562.2.4.1.12.4.3.10 |
| This group contains the provisionable attributes of the Fddi Phy
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiPhyProvEntry |
|
| lpFiPhyProvEntry |
1.3.6.1.4.1.562.2.4.1.12.4.3.10.1 |
| An entry in the lpFiPhyProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiPhyProvEntry |
|
|
| lpFiPhyLerCutoff |
1.3.6.1.4.1.562.2.4.1.12.4.3.10.1.1 |
| The lerCutoff attribute contains the link error rate estimate at which a
link connection will be broken. The values will range from 10**-4 to
10**-15. Only the absolute value of the base 10 log is reported. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
4..15 |
|
| lpFiPhyLerAlarm |
1.3.6.1.4.1.562.2.4.1.12.4.3.10.1.2 |
| The lerAlarm attribute contains the link error rate estimate at which a
link connection will generate an alarm. The values will range from
10**-4 to 10**-15. Only the absolute value of the base 10 log is
reported |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
4..15 |
|
| lpFiPhyLinkErrorMonitor |
1.3.6.1.4.1.562.2.4.1.12.4.3.10.1.3 |
| The linkErrorMonitor attribute is used to select the state of the link error
monitor for the associated Phy component. If enabled, the link error
monitor will send the correct test status to the neighboring station. If
disabled, the link error monitor will always send a test passed status to
the neighboring station. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| lpFiPhyOperTable |
1.3.6.1.4.1.562.2.4.1.12.4.3.11 |
| This group contains the operational attributes of the Fddi Phy
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiPhyOperEntry |
|
| lpFiPhyOperEntry |
1.3.6.1.4.1.562.2.4.1.12.4.3.11.1 |
| An entry in the lpFiPhyOperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiPhyOperEntry |
|
|
| lpFiPhyNeighborType |
1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.4 |
| This attribute indicates the neighbor type of the neighbor physical layer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
a(1), b(2), s(3), m(4), none(5) |
|
| lpFiPhyLctFailCounts |
1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.13 |
| The lctFailCounts attribute contains the number of consecutive times the
Link Confidence Test (LCT) has failed. This counter will wrap around
after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiPhyLerEstimate |
1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.14 |
| The lerEstimate attribute contains a long term average link error rate.
The values will range from 10**-4 to 10**-15. Only the absolute value
of the base 10 log is reported |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
4..15 |
|
| lpFiPhyLemRejectCounts |
1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.15 |
| The lemRejectCounts attribute contains the number of times that a link
has been rejected. This counter will wrap around after it reaches its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiPhyLemCounts |
1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.16 |
| The lemCounts attribute contains the aggregate link error monitor error
count. This counter is set to zero only on station initialization. This
counter will wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiPhyPcmState |
1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.18 |
| The pcmState, physical connection manager (PCM), state indicates the
current state of the PCM state machine. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(1), break(2), trace(3), connect(4), next(5), signal(6), join(7), verify(8), active(9), maint(10) |
|
| lpFiPhyLerFlag |
1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.20 |
| The lerFlag attribute indicates when the link error rate estimate is less
than or equal to the link error rate alarm. If true, the value of the link
error rate estimate is less than or equal to the link error rate alarm. If
false, the value of the link error rate estimate is greater than the link
error rate alarm. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2) |
|
| lpFiPhySignalState |
1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.23 |
| The signalState attribute contains the current physical connection
manager (PCM) signal bit being transmitted, or was transmitted, during
the PCM signal state. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
escape(0), phyTypeL(1), phyTypeH(2), accept(3), lctLengthL(4), lctLengthH(5), macAvail(6), lctResult(7), macLoop(8), macOnPhy(9), signalingDone(10) |
|
| lpFiPhySignalBitsRcvd |
1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.24 |
| The signalBitsRcvd attribute contains the current physical connection
manager (PCM) signal bits received.
Description of bits:
escape(0)
phyTypeL(1)
phyTypeH(2)
accept(3)
lctLengthL(4)
lctLengthH(5)
macAvail(6)
lctResult(7)
macLoop(8)
macOnPhy(9) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(2) |
|
| lpFiPhySignalBitsTxmt |
1.3.6.1.4.1.562.2.4.1.12.4.3.11.1.25 |
| The signalBitsTxmt attribute contains the current physical connection
manager (PCM) signal bits transmitted.
Description of bits:
escape(0)
phyTypeL(1)
phyTypeH(2)
accept(3)
lctLengthL(4)
lctLengthH(5)
macAvail(6)
lctResult(7)
macLoop(8)
macOnPhy(9) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(2) |
|
| lpFiTest |
1.3.6.1.4.1.562.2.4.1.12.4.5 |
| OBJECT IDENTIFIER |
|
|
|
| lpFiTestRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.4.5.1.1 |
| A single entry in the table represents a single
lpFiTest component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiTestRowStatusEntry |
|
|
| lpFiTestRowStatus |
1.3.6.1.4.1.562.2.4.1.12.4.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpFiTest components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpFiTestComponentName |
1.3.6.1.4.1.562.2.4.1.12.4.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpFiTestStorageType |
1.3.6.1.4.1.562.2.4.1.12.4.5.1.1.4 |
| This variable represents the storage type value for the
lpFiTest tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpFiTestIndex |
1.3.6.1.4.1.562.2.4.1.12.4.5.1.1.10 |
| This variable represents the index for the lpFiTest tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpFiTestPTOTable |
1.3.6.1.4.1.562.2.4.1.12.4.5.10 |
| This group contains the operational data for the LanPortTest
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiTestPTOEntry |
|
| lpFiTestPTOEntry |
1.3.6.1.4.1.562.2.4.1.12.4.5.10.1 |
| An entry in the lpFiTestPTOTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiTestPTOEntry |
|
|
| lpFiTestType |
1.3.6.1.4.1.562.2.4.1.12.4.5.10.1.1 |
| This attribute is the type of test to be run. The available test types
include the following: card test sets up an internal loop on the board
and runs a bit error rate test; manual test assumes the line is looped
back externally and a bit error rate test is performed; localLoop test
loops back the local modem and performs a bit error rate test;
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test; externalLoop test loops back the line
to the far end; payloadLoop test only loops back the payload data
received from the incoming line; Note that localLoop, remoteLoop
and payloadLoop are not supported by all function processors. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) |
|
| lpFiTestFrmSize |
1.3.6.1.4.1.562.2.4.1.12.4.5.10.1.2 |
| This attribute defines the size of the test data frames in number of
bytes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
4..4096 |
|
| lpFiTestDuration |
1.3.6.1.4.1.562.2.4.1.12.4.5.10.1.3 |
| This attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..30240 |
|
| lpFiTestResultsTable |
1.3.6.1.4.1.562.2.4.1.12.4.5.11 |
| This group contains all the statistics related attributes of the Test
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpFiTestResultsEntry |
|
| lpFiTestResultsEntry |
1.3.6.1.4.1.562.2.4.1.12.4.5.11.1 |
| An entry in the lpFiTestResultsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpFiTestResultsEntry |
|
|
| lpFiTestElapsedTime |
1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.4 |
| This attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpFiTestTimeRemaining |
1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.5 |
| This attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| lpFiTestCauseOfTermination |
1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.6 |
| This attribute records the reason the test is terminated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) |
|
| lpFiTestFrmTx |
1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.7 |
| This attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpFiTestBitsTx |
1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.8 |
| This attribute is the total number of bits sent during the test period.
This counter is not expected to reach its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpFiTestFrmRx |
1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.9 |
| This attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpFiTestBitsRx |
1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.10 |
| This attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpFiTestErroredFrmRx |
1.3.6.1.4.1.562.2.4.1.12.4.5.11.1.11 |
| This attribute is the total number of errored frames received during
the test period. This counter is not expected to reach its maximum
value. The counter will wrap around to 0 if it does reach its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpTr |
1.3.6.1.4.1.562.2.4.1.12.13 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrRowStatusTable |
1.3.6.1.4.1.562.2.4.1.12.13.1 |
| This entry controls the addition and deletion of
lpTr components. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrRowStatusEntry |
|
| lpTrRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.1.1 |
| A single entry in the table represents a single
lpTr component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrRowStatusEntry |
|
|
| lpTrRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTr components.
These components can be added and deleted. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.1.1.4 |
| This variable represents the storage type value for the
lpTr tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrIndex |
1.3.6.1.4.1.562.2.4.1.12.13.1.1.10 |
| This variable represents the index for the lpTr tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..5 |
|
| lpTrCidDataTable |
1.3.6.1.4.1.562.2.4.1.12.13.10 |
| This group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrCidDataEntry |
|
| lpTrCidDataEntry |
1.3.6.1.4.1.562.2.4.1.12.13.10.1 |
| An entry in the lpTrCidDataTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrCidDataEntry |
|
|
| lpTrCustomerIdentifier |
1.3.6.1.4.1.562.2.4.1.12.13.10.1.1 |
| This attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0 | 1..8191 |
|
| lpTrIfEntryTable |
1.3.6.1.4.1.562.2.4.1.12.13.11 |
| This group contains the provisionable attributes for the ifEntry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrIfEntryEntry |
|
| lpTrIfEntryEntry |
1.3.6.1.4.1.562.2.4.1.12.13.11.1 |
| An entry in the lpTrIfEntryTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrIfEntryEntry |
|
|
| lpTrIfAdminStatus |
1.3.6.1.4.1.562.2.4.1.12.13.11.1.1 |
| The desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| lpTrIfIndex |
1.3.6.1.4.1.562.2.4.1.12.13.11.1.2 |
| This is the index for the IfEntry. Its value is automatically initialized
during the provisioning process. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
InterfaceIndex |
1..65535 |
|
| lpTrProvTable |
1.3.6.1.4.1.562.2.4.1.12.13.12 |
| This group contains the provisionable attributes of the Token Ring
port. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrProvEntry |
|
| lpTrProvEntry |
1.3.6.1.4.1.562.2.4.1.12.13.12.1 |
| An entry in the lpTrProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrProvEntry |
|
|
| lpTrRingSpeed |
1.3.6.1.4.1.562.2.4.1.12.13.12.1.1 |
| This attribute indicates the ring speed at the next insertion into the
ring. Note that all the interfaces on a ring must operate at the same
speed. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
fourMegabit(3), sixteenMegabit(4) |
|
| lpTrMonitorParticipate |
1.3.6.1.4.1.562.2.4.1.12.13.12.1.2 |
| This attribute determines whether the interface will participate in
the active monitor selection process. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2) |
|
| lpTrFunctionalAddress |
1.3.6.1.4.1.562.2.4.1.12.13.12.1.3 |
| This attribute contains a bit mask of all token ring functional
addresses for which this interface will accept frames. The address is
displayed in canonical form. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpTrNodeAddress |
1.3.6.1.4.1.562.2.4.1.12.13.12.1.4 |
| This attribute identifies the primary, node specific address
recognized by this interface. If an operator does not provision a
MAC address, the interface will use a predefined, permanently
assigned address.
A valid node address must not be any of the following: a broadcast
address, a group address, a functional address or a null address. A
node address should be entered in the canonical form. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpTrGroupAddress |
1.3.6.1.4.1.562.2.4.1.12.13.12.1.5 |
| This attribute identifies the group address for which this interface
will accept frames. The address is displayed in canonical form. For
a valid group address, the least significant bit of the first octet
should be set to 1. Currently, only one group address can be
provisioned for one interface. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpTrProductId |
1.3.6.1.4.1.562.2.4.1.12.13.12.1.6 |
| This attribute is used to identify the host system attached to this
interface. This information is transmitted in response to Request
Station Attachment MAC frames. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..18) |
|
| lpTrApplicationFramerName |
1.3.6.1.4.1.562.2.4.1.12.13.12.1.7 |
| This attribute contains the component name of a Framer which is
associated with the Tr component. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Link |
|
|
| lpTrAdminInfoTable |
1.3.6.1.4.1.562.2.4.1.12.13.13 |
| This group contains the attributes pertaining to the vendor of the
equipment. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrAdminInfoEntry |
|
| lpTrAdminInfoEntry |
1.3.6.1.4.1.562.2.4.1.12.13.13.1 |
| An entry in the lpTrAdminInfoTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrAdminInfoEntry |
|
|
| lpTrVendor |
1.3.6.1.4.1.562.2.4.1.12.13.13.1.1 |
| This is the name of the vendor supplying the facility. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..20) |
|
| lpTrStateTable |
1.3.6.1.4.1.562.2.4.1.12.13.15 |
| This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrStateEntry |
|
| lpTrStateEntry |
1.3.6.1.4.1.562.2.4.1.12.13.15.1 |
| An entry in the lpTrStateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrStateEntry |
|
|
| lpTrAdminState |
1.3.6.1.4.1.562.2.4.1.12.13.15.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| lpTrOperationalState |
1.3.6.1.4.1.562.2.4.1.12.13.15.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| lpTrUsageState |
1.3.6.1.4.1.562.2.4.1.12.13.15.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| lpTrOperStatusTable |
1.3.6.1.4.1.562.2.4.1.12.13.16 |
| This group includes the Operational Status attribute. This attribute
defines the current operational state of this component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrOperStatusEntry |
|
| lpTrOperStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.16.1 |
| An entry in the lpTrOperStatusTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrOperStatusEntry |
|
|
| lpTrSnmpOperStatus |
1.3.6.1.4.1.562.2.4.1.12.13.16.1.1 |
| The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| lpTrOperTable |
1.3.6.1.4.1.562.2.4.1.12.13.17 |
| This group contains the operational attributes of the Token Ring
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrOperEntry |
|
| lpTrOperEntry |
1.3.6.1.4.1.562.2.4.1.12.13.17.1 |
| An entry in the lpTrOperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrOperEntry |
|
|
| lpTrMacAddress |
1.3.6.1.4.1.562.2.4.1.12.13.17.1.2 |
| This attribute contains the actual MAC address. The value is
assigned by the system if nodeAddress is not provisioned. This
address is displayed in canonical form. The non-canonical version
of this address is indicated in ncMacAddress. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpTrRingState |
1.3.6.1.4.1.562.2.4.1.12.13.17.1.4 |
| This attribute contains the value of the current interface state with
respect to entering or leaving the ring. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
opened(1), closed(2), opening(3), closing(4), openFailure(5), ringFailure(6) |
|
| lpTrRingStatus |
1.3.6.1.4.1.562.2.4.1.12.13.17.1.5 |
| This attribute contains the value of the current interface status after
the station has entered the ring. The value is a sum of values, one
for each currently applicable condition. Before the station attempts
an open this attribute has the value of noStatus.
noProblems = 0,
ringRecovery = 32,
singleStation = 64,
removeReceived = 256,
reserved = 512,
autoRemovalError = 1024,
lobeWireFault = 2048,
transmitBeacon = 4096,
softError = 8192,
hardError = 16384,
signalLoss = 32768,
noStatus = 131072
Description of bits:
noProblems(0)
notused1(1)
notused2(2)
notused3(3)
notused4(4)
ringRecovery(5)
singleStation(6)
notused7(7)
removeReceived(8)
reserved(9)
autoRemovalError(10)
lobeWireFault(11)
transmitBeacon(12)
softError(13)
hardError(14)
signalLoss(15)
notused16(16)
noStatus(17) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(3) |
|
| lpTrRingOpenStatus |
1.3.6.1.4.1.562.2.4.1.12.13.17.1.6 |
| This attribute indicates what happened the last time the station
attempted to enter into the ring. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
noOpen(1), badParam(2), lobeFailed(3), signalLoss(4), insertionTimeout(5), ringFailed(6), beaconing(7), duplicateMac(8), requestFailed(9), removeReceived(10), open(11) |
|
| lpTrUpStream |
1.3.6.1.4.1.562.2.4.1.12.13.17.1.7 |
| This attribute is the MAC address of the station's up-stream
neighbor. This address is displayed in canonical form. The non-
canonical version of this address is indicated in ncUpStream. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpTrChipSet |
1.3.6.1.4.1.562.2.4.1.12.13.17.1.9 |
| This attribute identifies the hardware chip set in use by an interface. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ibm16(1), titms380(2), titms380c16(3), titms380c26(4) |
|
| lpTrLastTimeBeaconSent |
1.3.6.1.4.1.562.2.4.1.12.13.17.1.10 |
| This attribute indicates the time at which a Beacon frame was last
transmitted on this interface. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
EnterpriseDateAndTime |
Size(0|19) |
|
| lpTrStatsTable |
1.3.6.1.4.1.562.2.4.1.12.13.18 |
| This group contains statistical information for the Token Ring port. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrStatsEntry |
|
| lpTrStatsEntry |
1.3.6.1.4.1.562.2.4.1.12.13.18.1 |
| An entry in the lpTrStatsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrStatsEntry |
|
|
| lpTrLineErrors |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.2 |
| This attribute contains the number of frames or tokens copied or
repeated by a station where there is a non-data bit or a FCS error.
This counter wraps around when the maximum value is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrBurstErrors |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.3 |
| This attribute contains the number of times the station detects the
absence of transitions for five consecutive half-bit times. This
counter wraps around when the maximum value is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrAcErrors |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.4 |
| This attribute contains the number of times that a station can not set
the AC bits properly. This counter wraps around when the
maximum value is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrAbortTransErrors |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.5 |
| This attribute contains the number of aborted frames. This counter
wraps around when the maximum value is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrInternalErrors |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.6 |
| This attribute contains the number of internal errors. When the
value of the counter soars up quickly, it indicates a potential
hardware problem. This counter wraps around when the maximum
value is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrLostFrameErrors |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.7 |
| This attribute contains the number of times a station is transmitting
and its TRR timer expires. This counter wraps around when the
maximum value is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrReceiveCongestions |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.8 |
| This attribute contains the number of times a station is supposed to
receive a frame but cannot due to lack of buffer space. This counter
wraps around when the maximum value is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrFrameCopiedErrors |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.9 |
| This attribute contains the number of times a station receives a
frame addressed to its specific address and detects that the A bit is
set. This counter wraps around when the maximum value is
reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrTokenErrors |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.10 |
| This attribute contains the number of times a station acting as the
active monitor recognizes an error condition that needs a token
transmission. This counter wraps around when the maximum value
is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrSoftErrors |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.11 |
| This attribute contains the number of soft errors or the number of
Report Error Mac frames the station has transmitted. This counter
wraps around when the maximum value is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrHardErrors |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.12 |
| This attribute contains the number of times this interface has
detected an immediately recoverable fatal error. This counter wraps
around when the maximum value is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrSignalLoss |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.13 |
| This attribute contains the number of times signal condition has
been lost. This counter wraps around when the maximum value is
reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrTransmitBeacons |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.14 |
| This attribute contains the number of beacon frames transmitted.
This counter wraps around when the maximum value is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrRingRecoverys |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.15 |
| This attribute contains the number of times the ring has been
purged. This counter wraps around when the maximum value is
reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrLobeWires |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.16 |
| This attribute contains the number of times the interface has
detected a short circuit in the lobe data path. This counter wraps
around when the maximum value is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrRemoveRings |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.17 |
| This attribute contains the number of Remove Ring Station Mac
frames received. This counter wraps around when the maximum
value is reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrSingleStation |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.18 |
| This attribute contains the number of times the station has
determined it is the only one on the ring. This is not necessarily an
error. This counter wraps around when the maximum value is
reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrFreqErrors |
1.3.6.1.4.1.562.2.4.1.12.13.18.1.19 |
| This attribute contains the number of signal frequency errors
detected. This counter wraps around when the maximum value is
reached. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrNcMacOperTable |
1.3.6.1.4.1.562.2.4.1.12.13.20 |
| This group contains the operational attributes of the TokenRing port
component related to non-canonical MAC addresses. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrNcMacOperEntry |
|
| lpTrNcMacOperEntry |
1.3.6.1.4.1.562.2.4.1.12.13.20.1 |
| An entry in the lpTrNcMacOperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrNcMacOperEntry |
|
|
| lpTrNcMacAddress |
1.3.6.1.4.1.562.2.4.1.12.13.20.1.1 |
| This attribute contains the actual MAC address. The value is
assigned by the system if nodeAddress is not provisioned. This
address is displayed in non-canonical form. The canonical version
of this address is indicated in macAddress. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpTrNcUpStream |
1.3.6.1.4.1.562.2.4.1.12.13.20.1.2 |
| This attribute is the MAC address of the station's up-stream
neighbor. This address is displayed in non-canonical form. The
canonical version of this address is indicated in upStream. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpTrLt |
1.3.6.1.4.1.562.2.4.1.12.13.2 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrLtRowStatusTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.1 |
| This entry controls the addition and deletion of
lpTrLt components. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtRowStatusEntry |
|
| lpTrLtRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.1.1 |
| A single entry in the table represents a single
lpTrLt component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtRowStatusEntry |
|
|
| lpTrLtRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLt components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.1.1.4 |
| This variable represents the storage type value for the
lpTrLt tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.1.1.10 |
| This variable represents the index for the lpTrLt tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.20 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtTopEntry |
|
| lpTrLtTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.20.1 |
| An entry in the lpTrLtTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtTopEntry |
|
|
| lpTrLtTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.20.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtFrmCmp |
1.3.6.1.4.1.562.2.4.1.12.13.2.2 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrLtFrmCmpRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.2.1.1 |
| A single entry in the table represents a single
lpTrLtFrmCmp component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFrmCmpRowStatusEntry |
|
|
| lpTrLtFrmCmpRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtFrmCmp components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtFrmCmpComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtFrmCmpStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.2.1.1.4 |
| This variable represents the storage type value for the
lpTrLtFrmCmp tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtFrmCmpIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.2.1.1.10 |
| This variable represents the index for the lpTrLtFrmCmp tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtFrmCmpTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.2.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtFrmCmpTopEntry |
|
| lpTrLtFrmCmpTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.2.10.1 |
| An entry in the lpTrLtFrmCmpTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFrmCmpTopEntry |
|
|
| lpTrLtFrmCmpTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.2.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtFrmCpy |
1.3.6.1.4.1.562.2.4.1.12.13.2.3 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrLtFrmCpyRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.3.1.1 |
| A single entry in the table represents a single
lpTrLtFrmCpy component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFrmCpyRowStatusEntry |
|
|
| lpTrLtFrmCpyRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtFrmCpy components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtFrmCpyComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtFrmCpyStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.3.1.1.4 |
| This variable represents the storage type value for the
lpTrLtFrmCpy tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtFrmCpyIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.3.1.1.10 |
| This variable represents the index for the lpTrLtFrmCpy tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtFrmCpyTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.3.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtFrmCpyTopEntry |
|
| lpTrLtFrmCpyTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.3.10.1 |
| An entry in the lpTrLtFrmCpyTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFrmCpyTopEntry |
|
|
| lpTrLtFrmCpyTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.3.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtPrtCfg |
1.3.6.1.4.1.562.2.4.1.12.13.2.4 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrLtPrtCfgRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.4.1.1 |
| A single entry in the table represents a single
lpTrLtPrtCfg component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtPrtCfgRowStatusEntry |
|
|
| lpTrLtPrtCfgRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.4.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtPrtCfg components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtPrtCfgComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.4.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtPrtCfgStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.4.1.1.4 |
| This variable represents the storage type value for the
lpTrLtPrtCfg tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtPrtCfgIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.4.1.1.10 |
| This variable represents the index for the lpTrLtPrtCfg tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtPrtCfgTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.4.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtPrtCfgTopEntry |
|
| lpTrLtPrtCfgTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.4.10.1 |
| An entry in the lpTrLtPrtCfgTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtPrtCfgTopEntry |
|
|
| lpTrLtPrtCfgTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.4.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtFb |
1.3.6.1.4.1.562.2.4.1.12.13.2.5 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrLtFbRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.1.1 |
| A single entry in the table represents a single
lpTrLtFb component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbRowStatusEntry |
|
|
| lpTrLtFbRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtFb components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtFbComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtFbStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.1.1.4 |
| This variable represents the storage type value for the
lpTrLtFb tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtFbIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.1.1.10 |
| This variable represents the index for the lpTrLtFb tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtFbTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.20 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtFbTopEntry |
|
| lpTrLtFbTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.20.1 |
| An entry in the lpTrLtFbTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbTopEntry |
|
|
| lpTrLtFbTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.20.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtFbTxInfoRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.1.1 |
| A single entry in the table represents a single
lpTrLtFbTxInfo component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbTxInfoRowStatusEntry |
|
|
| lpTrLtFbTxInfoRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtFbTxInfo components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtFbTxInfoComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtFbTxInfoStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.1.1.4 |
| This variable represents the storage type value for the
lpTrLtFbTxInfo tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtFbTxInfoIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.1.1.10 |
| This variable represents the index for the lpTrLtFbTxInfo tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtFbTxInfoTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtFbTxInfoTopEntry |
|
| lpTrLtFbTxInfoTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.10.1 |
| An entry in the lpTrLtFbTxInfoTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbTxInfoTopEntry |
|
|
| lpTrLtFbTxInfoTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.2.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtFbFddiMacRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.1.1 |
| A single entry in the table represents a single
lpTrLtFbFddiMac component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbFddiMacRowStatusEntry |
|
|
| lpTrLtFbFddiMacRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtFbFddiMac components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtFbFddiMacComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtFbFddiMacStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.1.1.4 |
| This variable represents the storage type value for the
lpTrLtFbFddiMac tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtFbFddiMacIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.1.1.10 |
| This variable represents the index for the lpTrLtFbFddiMac tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtFbFddiMacTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtFbFddiMacTopEntry |
|
| lpTrLtFbFddiMacTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.10.1 |
| An entry in the lpTrLtFbFddiMacTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbFddiMacTopEntry |
|
|
| lpTrLtFbFddiMacTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.3.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtFbMacEnetRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.1.1 |
| A single entry in the table represents a single
lpTrLtFbMacEnet component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbMacEnetRowStatusEntry |
|
|
| lpTrLtFbMacEnetRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtFbMacEnet components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtFbMacEnetComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtFbMacEnetStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.1.1.4 |
| This variable represents the storage type value for the
lpTrLtFbMacEnet tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtFbMacEnetIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.1.1.10 |
| This variable represents the index for the lpTrLtFbMacEnet tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtFbMacEnetTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtFbMacEnetTopEntry |
|
| lpTrLtFbMacEnetTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.10.1 |
| An entry in the lpTrLtFbMacEnetTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbMacEnetTopEntry |
|
|
| lpTrLtFbMacEnetTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.4.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtFbMacTr |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.5 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrLtFbMacTrRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.1.1 |
| A single entry in the table represents a single
lpTrLtFbMacTr component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbMacTrRowStatusEntry |
|
|
| lpTrLtFbMacTrRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtFbMacTr components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtFbMacTrComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtFbMacTrStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.1.1.4 |
| This variable represents the storage type value for the
lpTrLtFbMacTr tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtFbMacTrIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.1.1.10 |
| This variable represents the index for the lpTrLtFbMacTr tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtFbMacTrTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtFbMacTrTopEntry |
|
| lpTrLtFbMacTrTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.10.1 |
| An entry in the lpTrLtFbMacTrTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbMacTrTopEntry |
|
|
| lpTrLtFbMacTrTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.5.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtFbData |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.6 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrLtFbDataRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.1.1 |
| A single entry in the table represents a single
lpTrLtFbData component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbDataRowStatusEntry |
|
|
| lpTrLtFbDataRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtFbData components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtFbDataComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtFbDataStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.1.1.4 |
| This variable represents the storage type value for the
lpTrLtFbData tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtFbDataIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.1.1.10 |
| This variable represents the index for the lpTrLtFbData tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtFbDataTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtFbDataTopEntry |
|
| lpTrLtFbDataTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.10.1 |
| An entry in the lpTrLtFbDataTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbDataTopEntry |
|
|
| lpTrLtFbDataTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.6.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtFbIpH |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.7 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrLtFbIpHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.1.1 |
| A single entry in the table represents a single
lpTrLtFbIpH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbIpHRowStatusEntry |
|
|
| lpTrLtFbIpHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtFbIpH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtFbIpHComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtFbIpHStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.1.1.4 |
| This variable represents the storage type value for the
lpTrLtFbIpH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtFbIpHIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.1.1.10 |
| This variable represents the index for the lpTrLtFbIpH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtFbIpHTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtFbIpHTopEntry |
|
| lpTrLtFbIpHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.10.1 |
| An entry in the lpTrLtFbIpHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbIpHTopEntry |
|
|
| lpTrLtFbIpHTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.7.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtFbLlch |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.8 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrLtFbLlchRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.1.1 |
| A single entry in the table represents a single
lpTrLtFbLlch component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbLlchRowStatusEntry |
|
|
| lpTrLtFbLlchRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtFbLlch components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtFbLlchComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtFbLlchStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.1.1.4 |
| This variable represents the storage type value for the
lpTrLtFbLlch tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtFbLlchIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.1.1.10 |
| This variable represents the index for the lpTrLtFbLlch tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtFbLlchTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtFbLlchTopEntry |
|
| lpTrLtFbLlchTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.10.1 |
| An entry in the lpTrLtFbLlchTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbLlchTopEntry |
|
|
| lpTrLtFbLlchTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.8.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtFbAppleHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.1.1 |
| A single entry in the table represents a single
lpTrLtFbAppleH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbAppleHRowStatusEntry |
|
|
| lpTrLtFbAppleHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtFbAppleH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtFbAppleHComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtFbAppleHStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.1.1.4 |
| This variable represents the storage type value for the
lpTrLtFbAppleH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtFbAppleHIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.1.1.10 |
| This variable represents the index for the lpTrLtFbAppleH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtFbAppleHTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtFbAppleHTopEntry |
|
| lpTrLtFbAppleHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.10.1 |
| An entry in the lpTrLtFbAppleHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbAppleHTopEntry |
|
|
| lpTrLtFbAppleHTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.9.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtFbIpxH |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.10 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrLtFbIpxHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.1.1 |
| A single entry in the table represents a single
lpTrLtFbIpxH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbIpxHRowStatusEntry |
|
|
| lpTrLtFbIpxHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtFbIpxH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtFbIpxHComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtFbIpxHStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.1.1.4 |
| This variable represents the storage type value for the
lpTrLtFbIpxH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtFbIpxHIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.1.1.10 |
| This variable represents the index for the lpTrLtFbIpxH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtFbIpxHTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtFbIpxHTopEntry |
|
| lpTrLtFbIpxHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.10.1 |
| An entry in the lpTrLtFbIpxHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtFbIpxHTopEntry |
|
|
| lpTrLtFbIpxHTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.5.10.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrLtCntl |
1.3.6.1.4.1.562.2.4.1.12.13.2.6 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrLtCntlRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.6.1.1 |
| A single entry in the table represents a single
lpTrLtCntl component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtCntlRowStatusEntry |
|
|
| lpTrLtCntlRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.2.6.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrLtCntl components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrLtCntlComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.2.6.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrLtCntlStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.2.6.1.1.4 |
| This variable represents the storage type value for the
lpTrLtCntl tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrLtCntlIndex |
1.3.6.1.4.1.562.2.4.1.12.13.2.6.1.1.10 |
| This variable represents the index for the lpTrLtCntl tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrLtCntlTopTable |
1.3.6.1.4.1.562.2.4.1.12.13.2.6.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrLtCntlTopEntry |
|
| lpTrLtCntlTopEntry |
1.3.6.1.4.1.562.2.4.1.12.13.2.6.10.1 |
| An entry in the lpTrLtCntlTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrLtCntlTopEntry |
|
|
| lpTrLtCntlTData |
1.3.6.1.4.1.562.2.4.1.12.13.2.6.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpTrTest |
1.3.6.1.4.1.562.2.4.1.12.13.5 |
| OBJECT IDENTIFIER |
|
|
|
| lpTrTestRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.13.5.1.1 |
| A single entry in the table represents a single
lpTrTest component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrTestRowStatusEntry |
|
|
| lpTrTestRowStatus |
1.3.6.1.4.1.562.2.4.1.12.13.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpTrTest components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpTrTestComponentName |
1.3.6.1.4.1.562.2.4.1.12.13.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpTrTestStorageType |
1.3.6.1.4.1.562.2.4.1.12.13.5.1.1.4 |
| This variable represents the storage type value for the
lpTrTest tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpTrTestIndex |
1.3.6.1.4.1.562.2.4.1.12.13.5.1.1.10 |
| This variable represents the index for the lpTrTest tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpTrTestPTOTable |
1.3.6.1.4.1.562.2.4.1.12.13.5.10 |
| This group contains the operational data for the LanPortTest
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrTestPTOEntry |
|
| lpTrTestPTOEntry |
1.3.6.1.4.1.562.2.4.1.12.13.5.10.1 |
| An entry in the lpTrTestPTOTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrTestPTOEntry |
|
|
| lpTrTestType |
1.3.6.1.4.1.562.2.4.1.12.13.5.10.1.1 |
| This attribute is the type of test to be run. The available test types
include the following: card test sets up an internal loop on the board
and runs a bit error rate test; manual test assumes the line is looped
back externally and a bit error rate test is performed; localLoop test
loops back the local modem and performs a bit error rate test;
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test; externalLoop test loops back the line
to the far end; payloadLoop test only loops back the payload data
received from the incoming line; Note that localLoop, remoteLoop
and payloadLoop are not supported by all function processors. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) |
|
| lpTrTestFrmSize |
1.3.6.1.4.1.562.2.4.1.12.13.5.10.1.2 |
| This attribute defines the size of the test data frames in number of
bytes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
4..4096 |
|
| lpTrTestDuration |
1.3.6.1.4.1.562.2.4.1.12.13.5.10.1.3 |
| This attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..30240 |
|
| lpTrTestResultsTable |
1.3.6.1.4.1.562.2.4.1.12.13.5.11 |
| This group contains all the statistics related attributes of the Test
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpTrTestResultsEntry |
|
| lpTrTestResultsEntry |
1.3.6.1.4.1.562.2.4.1.12.13.5.11.1 |
| An entry in the lpTrTestResultsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpTrTestResultsEntry |
|
|
| lpTrTestElapsedTime |
1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.4 |
| This attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpTrTestTimeRemaining |
1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.5 |
| This attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| lpTrTestCauseOfTermination |
1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.6 |
| This attribute records the reason the test is terminated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) |
|
| lpTrTestFrmTx |
1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.7 |
| This attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpTrTestBitsTx |
1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.8 |
| This attribute is the total number of bits sent during the test period.
This counter is not expected to reach its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpTrTestFrmRx |
1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.9 |
| This attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpTrTestBitsRx |
1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.10 |
| This attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpTrTestErroredFrmRx |
1.3.6.1.4.1.562.2.4.1.12.13.5.11.1.11 |
| This attribute is the total number of errored frames received during
the test period. This counter is not expected to reach its maximum
value. The counter will wrap around to 0 if it does reach its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpIlsFwdr |
1.3.6.1.4.1.562.2.4.1.12.21 |
| OBJECT IDENTIFIER |
|
|
|
| lpIlsFwdrRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.1.1 |
| A single entry in the table represents a single
lpIlsFwdr component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrRowStatusEntry |
|
|
| lpIlsFwdrRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdr components.
These components can be added and deleted. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdr tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrIndex |
1.3.6.1.4.1.562.2.4.1.12.21.1.1.10 |
| This variable represents the index for the lpIlsFwdr tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0 |
|
| lpIlsFwdrIfEntryTable |
1.3.6.1.4.1.562.2.4.1.12.21.11 |
| This group contains the provisionable attributes for the ifEntry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpIlsFwdrIfEntryEntry |
|
| lpIlsFwdrIfEntryEntry |
1.3.6.1.4.1.562.2.4.1.12.21.11.1 |
| An entry in the lpIlsFwdrIfEntryTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrIfEntryEntry |
|
|
| lpIlsFwdrIfAdminStatus |
1.3.6.1.4.1.562.2.4.1.12.21.11.1.1 |
| The desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| lpIlsFwdrIfIndex |
1.3.6.1.4.1.562.2.4.1.12.21.11.1.2 |
| This is the index for the IfEntry. Its value is automatically initialized
during the provisioning process. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
InterfaceIndex |
1..65535 |
|
| lpIlsFwdrStateTable |
1.3.6.1.4.1.562.2.4.1.12.21.12 |
| This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpIlsFwdrStateEntry |
|
| lpIlsFwdrStateEntry |
1.3.6.1.4.1.562.2.4.1.12.21.12.1 |
| An entry in the lpIlsFwdrStateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrStateEntry |
|
|
| lpIlsFwdrAdminState |
1.3.6.1.4.1.562.2.4.1.12.21.12.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| lpIlsFwdrOperationalState |
1.3.6.1.4.1.562.2.4.1.12.21.12.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| lpIlsFwdrUsageState |
1.3.6.1.4.1.562.2.4.1.12.21.12.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| lpIlsFwdrOperStatusTable |
1.3.6.1.4.1.562.2.4.1.12.21.13 |
| This group includes the Operational Status attribute. This attribute
defines the current operational state of this component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpIlsFwdrOperStatusEntry |
|
| lpIlsFwdrOperStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.13.1 |
| An entry in the lpIlsFwdrOperStatusTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrOperStatusEntry |
|
|
| lpIlsFwdrSnmpOperStatus |
1.3.6.1.4.1.562.2.4.1.12.21.13.1.1 |
| The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| lpIlsFwdrStatsTable |
1.3.6.1.4.1.562.2.4.1.12.21.14 |
| This group contains the operational frame statistics related attributes of
the IlsForwarder component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpIlsFwdrStatsEntry |
|
| lpIlsFwdrStatsEntry |
1.3.6.1.4.1.562.2.4.1.12.21.14.1 |
| An entry in the lpIlsFwdrStatsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrStatsEntry |
|
|
| lpIlsFwdrFramesReceived |
1.3.6.1.4.1.562.2.4.1.12.21.14.1.1 |
| This attribute counts the total number of frames that have been received
by this card. This counter will wrap around after it reaches its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpIlsFwdrProcessedCount |
1.3.6.1.4.1.562.2.4.1.12.21.14.1.2 |
| This attribute counts the number of frames successfully processed by
this card. This counter will wrap around after it reaches its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpIlsFwdrErrorCount |
1.3.6.1.4.1.562.2.4.1.12.21.14.1.3 |
| This attribute counts the number of internal errors detected in
transferring frames from an ATM card to this card. A continuous
increment of this count indicates that the hardware may probably be
defective. This counter will wrap around after it reaches its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpIlsFwdrFramesDiscarded |
1.3.6.1.4.1.562.2.4.1.12.21.14.1.4 |
| This attribute counts the number of frames which are discarded due to
local buffer congestion. This counter will wrap around after it reaches its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpIlsFwdrLinkToTrafficSourceEntry |
1.3.6.1.4.1.562.2.4.1.12.21.312.1 |
| An entry in the lpIlsFwdrLinkToTrafficSourceTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLinkToTrafficSourceEntry |
|
|
| lpIlsFwdrLinkToTrafficSourceValue |
1.3.6.1.4.1.562.2.4.1.12.21.312.1.1 |
| This variable represents both the value and the index for the
lpIlsFwdrLinkToTrafficSourceTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Link |
|
|
| lpIlsFwdrLt |
1.3.6.1.4.1.562.2.4.1.12.21.2 |
| OBJECT IDENTIFIER |
|
|
|
| lpIlsFwdrLtRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLt component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtRowStatusEntry |
|
|
| lpIlsFwdrLtRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLt components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLt tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.1.1.10 |
| This variable represents the index for the lpIlsFwdrLt tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtTopTable |
1.3.6.1.4.1.562.2.4.1.12.21.2.20 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpIlsFwdrLtTopEntry |
|
| lpIlsFwdrLtTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.20.1 |
| An entry in the lpIlsFwdrLtTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtTopEntry |
|
|
| lpIlsFwdrLtTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.20.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtFrmCmpRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.2.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtFrmCmp component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFrmCmpRowStatusEntry |
|
|
| lpIlsFwdrLtFrmCmpRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtFrmCmp components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtFrmCmpComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtFrmCmpStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.2.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtFrmCmp tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtFrmCmpIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.2.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtFrmCmp tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtFrmCmpTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.2.10.1 |
| An entry in the lpIlsFwdrLtFrmCmpTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFrmCmpTopEntry |
|
|
| lpIlsFwdrLtFrmCmpTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.2.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtFrmCpyRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.3.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtFrmCpy component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFrmCpyRowStatusEntry |
|
|
| lpIlsFwdrLtFrmCpyRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtFrmCpy components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtFrmCpyComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtFrmCpyStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.3.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtFrmCpy tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtFrmCpyIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.3.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtFrmCpy tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtFrmCpyTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.3.10.1 |
| An entry in the lpIlsFwdrLtFrmCpyTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFrmCpyTopEntry |
|
|
| lpIlsFwdrLtFrmCpyTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.3.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtPrtCfgRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.4.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtPrtCfg component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtPrtCfgRowStatusEntry |
|
|
| lpIlsFwdrLtPrtCfgRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.4.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtPrtCfg components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtPrtCfgComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.4.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtPrtCfgStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.4.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtPrtCfg tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtPrtCfgIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.4.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtPrtCfg tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtPrtCfgTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.4.10.1 |
| An entry in the lpIlsFwdrLtPrtCfgTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtPrtCfgTopEntry |
|
|
| lpIlsFwdrLtPrtCfgTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.4.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtFbRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtFb component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbRowStatusEntry |
|
|
| lpIlsFwdrLtFbRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtFb components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtFbComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtFbStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtFb tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtFbIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtFb tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtFbTopTable |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.20 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpIlsFwdrLtFbTopEntry |
|
| lpIlsFwdrLtFbTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.20.1 |
| An entry in the lpIlsFwdrLtFbTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbTopEntry |
|
|
| lpIlsFwdrLtFbTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.20.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtFbTxInfoRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtFbTxInfo component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbTxInfoRowStatusEntry |
|
|
| lpIlsFwdrLtFbTxInfoRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtFbTxInfo components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtFbTxInfoComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtFbTxInfoStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtFbTxInfo tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtFbTxInfoIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtFbTxInfo tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtFbTxInfoTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.10.1 |
| An entry in the lpIlsFwdrLtFbTxInfoTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbTxInfoTopEntry |
|
|
| lpIlsFwdrLtFbTxInfoTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.2.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtFbFddiMacRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtFbFddiMac component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbFddiMacRowStatusEntry |
|
|
| lpIlsFwdrLtFbFddiMacRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtFbFddiMac components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtFbFddiMacStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtFbFddiMac tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtFbFddiMacIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtFbFddiMac tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtFbFddiMacTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.10.1 |
| An entry in the lpIlsFwdrLtFbFddiMacTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbFddiMacTopEntry |
|
|
| lpIlsFwdrLtFbFddiMacTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.3.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtFbMacEnetRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtFbMacEnet component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbMacEnetRowStatusEntry |
|
|
| lpIlsFwdrLtFbMacEnetRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtFbMacEnet components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtFbMacEnetStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtFbMacEnet tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtFbMacEnetIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtFbMacEnet tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtFbMacEnetTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.10.1 |
| An entry in the lpIlsFwdrLtFbMacEnetTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbMacEnetTopEntry |
|
|
| lpIlsFwdrLtFbMacEnetTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.4.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtFbMacTrRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtFbMacTr component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbMacTrRowStatusEntry |
|
|
| lpIlsFwdrLtFbMacTrRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtFbMacTr components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtFbMacTrComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtFbMacTrStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtFbMacTr tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtFbMacTrIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtFbMacTr tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtFbMacTrTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.10.1 |
| An entry in the lpIlsFwdrLtFbMacTrTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbMacTrTopEntry |
|
|
| lpIlsFwdrLtFbMacTrTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.5.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtFbDataRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtFbData component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbDataRowStatusEntry |
|
|
| lpIlsFwdrLtFbDataRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtFbData components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtFbDataComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtFbDataStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtFbData tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtFbDataIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtFbData tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtFbDataTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.10.1 |
| An entry in the lpIlsFwdrLtFbDataTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbDataTopEntry |
|
|
| lpIlsFwdrLtFbDataTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.6.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtFbIpHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtFbIpH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbIpHRowStatusEntry |
|
|
| lpIlsFwdrLtFbIpHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtFbIpH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtFbIpHComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtFbIpHStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtFbIpH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtFbIpHIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtFbIpH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtFbIpHTopTable |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpIlsFwdrLtFbIpHTopEntry |
|
| lpIlsFwdrLtFbIpHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.10.1 |
| An entry in the lpIlsFwdrLtFbIpHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbIpHTopEntry |
|
|
| lpIlsFwdrLtFbIpHTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.7.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtFbLlchRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtFbLlch component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbLlchRowStatusEntry |
|
|
| lpIlsFwdrLtFbLlchRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtFbLlch components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtFbLlchComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtFbLlchStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtFbLlch tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtFbLlchIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtFbLlch tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtFbLlchTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.10.1 |
| An entry in the lpIlsFwdrLtFbLlchTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbLlchTopEntry |
|
|
| lpIlsFwdrLtFbLlchTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.8.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtFbAppleHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtFbAppleH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbAppleHRowStatusEntry |
|
|
| lpIlsFwdrLtFbAppleHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtFbAppleH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtFbAppleHComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtFbAppleHStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtFbAppleH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtFbAppleHIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtFbAppleH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtFbAppleHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.10.1 |
| An entry in the lpIlsFwdrLtFbAppleHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbAppleHTopEntry |
|
|
| lpIlsFwdrLtFbAppleHTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.9.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtFbIpxHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtFbIpxH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbIpxHRowStatusEntry |
|
|
| lpIlsFwdrLtFbIpxHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtFbIpxH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtFbIpxHComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtFbIpxHStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtFbIpxH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtFbIpxHIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtFbIpxH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtFbIpxHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.10.1 |
| An entry in the lpIlsFwdrLtFbIpxHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtFbIpxHTopEntry |
|
|
| lpIlsFwdrLtFbIpxHTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.5.10.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrLtCntlRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.6.1.1 |
| A single entry in the table represents a single
lpIlsFwdrLtCntl component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtCntlRowStatusEntry |
|
|
| lpIlsFwdrLtCntlRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.2.6.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrLtCntl components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrLtCntlComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.2.6.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrLtCntlStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.2.6.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrLtCntl tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrLtCntlIndex |
1.3.6.1.4.1.562.2.4.1.12.21.2.6.1.1.10 |
| This variable represents the index for the lpIlsFwdrLtCntl tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrLtCntlTopTable |
1.3.6.1.4.1.562.2.4.1.12.21.2.6.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpIlsFwdrLtCntlTopEntry |
|
| lpIlsFwdrLtCntlTopEntry |
1.3.6.1.4.1.562.2.4.1.12.21.2.6.10.1 |
| An entry in the lpIlsFwdrLtCntlTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrLtCntlTopEntry |
|
|
| lpIlsFwdrLtCntlTData |
1.3.6.1.4.1.562.2.4.1.12.21.2.6.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpIlsFwdrTestRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.21.5.1.1 |
| A single entry in the table represents a single
lpIlsFwdrTest component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrTestRowStatusEntry |
|
|
| lpIlsFwdrTestRowStatus |
1.3.6.1.4.1.562.2.4.1.12.21.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpIlsFwdrTest components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpIlsFwdrTestComponentName |
1.3.6.1.4.1.562.2.4.1.12.21.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpIlsFwdrTestStorageType |
1.3.6.1.4.1.562.2.4.1.12.21.5.1.1.4 |
| This variable represents the storage type value for the
lpIlsFwdrTest tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpIlsFwdrTestIndex |
1.3.6.1.4.1.562.2.4.1.12.21.5.1.1.10 |
| This variable represents the index for the lpIlsFwdrTest tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpIlsFwdrTestPTOTable |
1.3.6.1.4.1.562.2.4.1.12.21.5.10 |
| This group contains the operational data for the LanPortTest
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpIlsFwdrTestPTOEntry |
|
| lpIlsFwdrTestPTOEntry |
1.3.6.1.4.1.562.2.4.1.12.21.5.10.1 |
| An entry in the lpIlsFwdrTestPTOTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrTestPTOEntry |
|
|
| lpIlsFwdrTestType |
1.3.6.1.4.1.562.2.4.1.12.21.5.10.1.1 |
| This attribute is the type of test to be run. The available test types
include the following: card test sets up an internal loop on the board
and runs a bit error rate test; manual test assumes the line is looped
back externally and a bit error rate test is performed; localLoop test
loops back the local modem and performs a bit error rate test;
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test; externalLoop test loops back the line
to the far end; payloadLoop test only loops back the payload data
received from the incoming line; Note that localLoop, remoteLoop
and payloadLoop are not supported by all function processors. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) |
|
| lpIlsFwdrTestFrmSize |
1.3.6.1.4.1.562.2.4.1.12.21.5.10.1.2 |
| This attribute defines the size of the test data frames in number of
bytes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
4..4096 |
|
| lpIlsFwdrTestDuration |
1.3.6.1.4.1.562.2.4.1.12.21.5.10.1.3 |
| This attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..30240 |
|
| lpIlsFwdrTestResultsEntry |
1.3.6.1.4.1.562.2.4.1.12.21.5.11.1 |
| An entry in the lpIlsFwdrTestResultsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpIlsFwdrTestResultsEntry |
|
|
| lpIlsFwdrTestElapsedTime |
1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.4 |
| This attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpIlsFwdrTestTimeRemaining |
1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.5 |
| This attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| lpIlsFwdrTestCauseOfTermination |
1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.6 |
| This attribute records the reason the test is terminated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) |
|
| lpIlsFwdrTestFrmTx |
1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.7 |
| This attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpIlsFwdrTestBitsTx |
1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.8 |
| This attribute is the total number of bits sent during the test period.
This counter is not expected to reach its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpIlsFwdrTestFrmRx |
1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.9 |
| This attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpIlsFwdrTestBitsRx |
1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.10 |
| This attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpIlsFwdrTestErroredFrmRx |
1.3.6.1.4.1.562.2.4.1.12.21.5.11.1.11 |
| This attribute is the total number of errored frames received during
the test period. This counter is not expected to reach its maximum
value. The counter will wrap around to 0 if it does reach its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpEth100 |
1.3.6.1.4.1.562.2.4.1.12.25 |
| OBJECT IDENTIFIER |
|
|
|
| lpEth100RowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.1.1 |
| A single entry in the table represents a single
lpEth100 component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100RowStatusEntry |
|
|
| lpEth100RowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100 components.
These components can be added and deleted. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100ComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100StorageType |
1.3.6.1.4.1.562.2.4.1.12.25.1.1.4 |
| This variable represents the storage type value for the
lpEth100 tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100Index |
1.3.6.1.4.1.562.2.4.1.12.25.1.1.10 |
| This variable represents the index for the lpEth100 tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..1 |
|
| lpEth100CidDataTable |
1.3.6.1.4.1.562.2.4.1.12.25.10 |
| This group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100CidDataEntry |
|
| lpEth100CidDataEntry |
1.3.6.1.4.1.562.2.4.1.12.25.10.1 |
| An entry in the lpEth100CidDataTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100CidDataEntry |
|
|
| lpEth100CustomerIdentifier |
1.3.6.1.4.1.562.2.4.1.12.25.10.1.1 |
| This attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0 | 1..8191 |
|
| lpEth100IfEntryTable |
1.3.6.1.4.1.562.2.4.1.12.25.11 |
| This group contains the provisionable attributes for the ifEntry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100IfEntryEntry |
|
| lpEth100IfEntryEntry |
1.3.6.1.4.1.562.2.4.1.12.25.11.1 |
| An entry in the lpEth100IfEntryTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100IfEntryEntry |
|
|
| lpEth100IfAdminStatus |
1.3.6.1.4.1.562.2.4.1.12.25.11.1.1 |
| The desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| lpEth100IfIndex |
1.3.6.1.4.1.562.2.4.1.12.25.11.1.2 |
| This is the index for the IfEntry. Its value is automatically initialized
during the provisioning process. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
InterfaceIndex |
1..65535 |
|
| lpEth100ProvTable |
1.3.6.1.4.1.562.2.4.1.12.25.12 |
| This group contains the provisionable attributes of the Eth100BaseT
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100ProvEntry |
|
| lpEth100ProvEntry |
1.3.6.1.4.1.562.2.4.1.12.25.12.1 |
| An entry in the lpEth100ProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100ProvEntry |
|
|
| lpEth100DuplexMode |
1.3.6.1.4.1.562.2.4.1.12.25.12.1.1 |
| This attribute specifies the duplex mode of the port. This attribute is
ignored if auto negotiation is successful. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
half(1), full(2) |
|
| lpEth100LineSpeed |
1.3.6.1.4.1.562.2.4.1.12.25.12.1.2 |
| This attribute sets the operating speed for the Ethernet 100BaseT port.
This attribute is ignored if auto negotiation is successful. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
10 | 100 |
|
| lpEth100AutoNegotiation |
1.3.6.1.4.1.562.2.4.1.12.25.12.1.3 |
| This attribute is used to select whether or not the port does auto
negotiation. The provisionable values of duplexMode and lineSpeed are
ignored if auto negotiation is successful. Refer to the operational
attribute autoNegStatus for auto negotiation results. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| lpEth100ApplicationFramerName |
1.3.6.1.4.1.562.2.4.1.12.25.12.1.4 |
| This attribute contains the component name of a Framer which is
associated with the Eth100BaseT component. This defines which Lan
Application will be using this Eth100BaseT interface. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Link |
|
|
| lpEth100AdminInfoEntry |
1.3.6.1.4.1.562.2.4.1.12.25.13.1 |
| An entry in the lpEth100AdminInfoTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100AdminInfoEntry |
|
|
| lpEth100Vendor |
1.3.6.1.4.1.562.2.4.1.12.25.13.1.1 |
| This is the name of the vendor supplying the facility. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..20) |
|
| lpEth100StateTable |
1.3.6.1.4.1.562.2.4.1.12.25.15 |
| This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100StateEntry |
|
| lpEth100StateEntry |
1.3.6.1.4.1.562.2.4.1.12.25.15.1 |
| An entry in the lpEth100StateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100StateEntry |
|
|
| lpEth100AdminState |
1.3.6.1.4.1.562.2.4.1.12.25.15.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| lpEth100OperationalState |
1.3.6.1.4.1.562.2.4.1.12.25.15.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| lpEth100UsageState |
1.3.6.1.4.1.562.2.4.1.12.25.15.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| lpEth100OperStatusTable |
1.3.6.1.4.1.562.2.4.1.12.25.16 |
| This group includes the Operational Status attribute. This attribute
defines the current operational state of this component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100OperStatusEntry |
|
| lpEth100OperStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.16.1 |
| An entry in the lpEth100OperStatusTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100OperStatusEntry |
|
|
| lpEth100SnmpOperStatus |
1.3.6.1.4.1.562.2.4.1.12.25.16.1.1 |
| The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| lpEth100OperTable |
1.3.6.1.4.1.562.2.4.1.12.25.17 |
| This group contains the Port operational attributes of the Eth100BaseT
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100OperEntry |
|
| lpEth100OperEntry |
1.3.6.1.4.1.562.2.4.1.12.25.17.1 |
| An entry in the lpEth100OperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100OperEntry |
|
|
| lpEth100MacAddress |
1.3.6.1.4.1.562.2.4.1.12.25.17.1.1 |
| This attribute indicates the medium access controller (MAC) address.
The MAC address is displayed in canonical format. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
Size(6) |
|
| lpEth100AutoNegStatus |
1.3.6.1.4.1.562.2.4.1.12.25.17.1.4 |
| This attribute displays the status of the auto negotiation at the Phy level. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
succeeded(1), failed(2), disabled(3) |
|
| lpEth100ActualLineSpeed |
1.3.6.1.4.1.562.2.4.1.12.25.17.1.5 |
| This attribute indicates the line speed of the Eth100BaseT port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
10 | 100 |
|
| lpEth100ActualDuplexMode |
1.3.6.1.4.1.562.2.4.1.12.25.17.1.6 |
| This attribute indicates whether the hardware is in half duplex or full
duplex mode. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
half(1), full(2) |
|
| lpEth100Eth100StatsEntry |
1.3.6.1.4.1.562.2.4.1.12.25.18.1 |
| An entry in the lpEth100Eth100StatsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100Eth100StatsEntry |
|
|
| lpEth100FramesTransmittedOk |
1.3.6.1.4.1.562.2.4.1.12.25.18.1.1 |
| This attribute counts the number of frames which were transmitted
without errors. This counter wraps to zero after it reaches its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100FramesReceivedOk |
1.3.6.1.4.1.562.2.4.1.12.25.18.1.2 |
| This attribute counts the number of frames which were received without
errors. This counter wraps to zero after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100OctetsTransmittedOk |
1.3.6.1.4.1.562.2.4.1.12.25.18.1.3 |
| This attribute counts the number of octets which were transmitted
without errors. This counter wraps to zero after it reaches its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100OctetsReceivedOk |
1.3.6.1.4.1.562.2.4.1.12.25.18.1.4 |
| This attribute counts the number of octets which were received without
errors. This counter wraps to zero after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100UndersizeFrames |
1.3.6.1.4.1.562.2.4.1.12.25.18.1.5 |
| This attribute counts the number of frames that were received but were
less than the minimum size (64 bytes). This counter wraps to zero after
it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100ReceivedOctetsIntoRouterBr |
1.3.6.1.4.1.562.2.4.1.12.25.18.1.6 |
| This attribute counts the number of octets that were not hardware
switched but were passed the Router or Bridge software. This counter
wraps to zero after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100ReceivedFramesIntoRouterBr |
1.3.6.1.4.1.562.2.4.1.12.25.18.1.7 |
| This attribute counts the number of frames which were not hardware
switched but were passed to the Router or Bridge software. This counter
wraps to zero after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100StatsTable |
1.3.6.1.4.1.562.2.4.1.12.25.19 |
| This group contains statistical attributes for the Ethernet component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100StatsEntry |
|
| lpEth100StatsEntry |
1.3.6.1.4.1.562.2.4.1.12.25.19.1 |
| An entry in the lpEth100StatsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100StatsEntry |
|
|
| lpEth100AlignmentErrors |
1.3.6.1.4.1.562.2.4.1.12.25.19.1.2 |
| The alignmentErrors counter indicates the number of frames received
which were not an integral number of octets in length. Frames will be
checked for alignmentErrors before they are checked for Frame Check
Sequence (FCS) errors. If there is an alignment error, the error will only
be counted here and not in fcsErrors. This counter will wrap around
after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100FcsErrors |
1.3.6.1.4.1.562.2.4.1.12.25.19.1.3 |
| The fcsErrors, Frame Check Sequence (FCS) error, counter indicates the
number of frames received which were an integral number of octets in
length and did not pass the FCS check. This counter will wrap around
after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100SingleCollisionFrames |
1.3.6.1.4.1.562.2.4.1.12.25.19.1.4 |
| The singleCollisionFrames counter indicates the number of frames
successfully transmitted which experienced exactly one collision. This
counter will wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100MultipleCollisionFrames |
1.3.6.1.4.1.562.2.4.1.12.25.19.1.5 |
| The multipleCollisionFrames counter indicates the number of frames
successfully transmitted which experienced more than one collision.
This counter will wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100SqeTestErrors |
1.3.6.1.4.1.562.2.4.1.12.25.19.1.6 |
| The sqeTestErrors, Signal Quality Error (SQE) Test errors, counter
indicates the number of times the 'SQE Test Error' message has been
generated for the station. This counter will wrap around after it reaches
its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100DeferredTransmissions |
1.3.6.1.4.1.562.2.4.1.12.25.19.1.7 |
| The deferredTransmissions counter indicates the number of frames
which experienced a transmission delay because the medium was busy.
This counter will wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100LateCollisions |
1.3.6.1.4.1.562.2.4.1.12.25.19.1.8 |
| The lateCollisions counter indicates the number of times a collision was
detected later than 512 bit-times into the transmission of a packet. This
counter will wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100ExcessiveCollisions |
1.3.6.1.4.1.562.2.4.1.12.25.19.1.9 |
| The excessiveCollisions counter indicates the number of frames which
failed to get transmitted due to excessive collisions. This counter will
wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100MacTransmitErrors |
1.3.6.1.4.1.562.2.4.1.12.25.19.1.10 |
| The Medium Access Controller (MAC) transmit error counter indicates
the number of times that a transmission failed due to internal MAC
transmit errors. This counter will wrap around after it reaches its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100CarrierSenseErrors |
1.3.6.1.4.1.562.2.4.1.12.25.19.1.11 |
| The carrier sense error counter indicates the number of times that the
carrier sense condition was lost or never asserted when attempting to
transmit a frame. This counter will wrap around after it reaches its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100MacReceiveErrors |
1.3.6.1.4.1.562.2.4.1.12.25.19.1.13 |
| The Medium Access Controller (MAC) receive error counter indicates
the number of times a receive failed due to internal MAC receive errors.
This counter will wrap around after it reaches its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100Lt |
1.3.6.1.4.1.562.2.4.1.12.25.2 |
| OBJECT IDENTIFIER |
|
|
|
| lpEth100LtRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.1.1 |
| A single entry in the table represents a single
lpEth100Lt component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtRowStatusEntry |
|
|
| lpEth100LtRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100Lt components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.1.1.4 |
| This variable represents the storage type value for the
lpEth100Lt tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.1.1.10 |
| This variable represents the index for the lpEth100Lt tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtTopTable |
1.3.6.1.4.1.562.2.4.1.12.25.2.20 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100LtTopEntry |
|
| lpEth100LtTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.20.1 |
| An entry in the lpEth100LtTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtTopEntry |
|
|
| lpEth100LtTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.20.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtFrmCmpRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.2.1.1 |
| A single entry in the table represents a single
lpEth100LtFrmCmp component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFrmCmpRowStatusEntry |
|
|
| lpEth100LtFrmCmpRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtFrmCmp components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtFrmCmpComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtFrmCmpStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.2.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtFrmCmp tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtFrmCmpIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.2.1.1.10 |
| This variable represents the index for the lpEth100LtFrmCmp tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtFrmCmpTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.2.10.1 |
| An entry in the lpEth100LtFrmCmpTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFrmCmpTopEntry |
|
|
| lpEth100LtFrmCmpTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.2.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtFrmCpyRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.3.1.1 |
| A single entry in the table represents a single
lpEth100LtFrmCpy component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFrmCpyRowStatusEntry |
|
|
| lpEth100LtFrmCpyRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtFrmCpy components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtFrmCpyComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtFrmCpyStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.3.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtFrmCpy tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtFrmCpyIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.3.1.1.10 |
| This variable represents the index for the lpEth100LtFrmCpy tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtFrmCpyTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.3.10.1 |
| An entry in the lpEth100LtFrmCpyTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFrmCpyTopEntry |
|
|
| lpEth100LtFrmCpyTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.3.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtPrtCfgRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.4.1.1 |
| A single entry in the table represents a single
lpEth100LtPrtCfg component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtPrtCfgRowStatusEntry |
|
|
| lpEth100LtPrtCfgRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.4.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtPrtCfg components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtPrtCfgComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.4.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtPrtCfgStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.4.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtPrtCfg tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtPrtCfgIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.4.1.1.10 |
| This variable represents the index for the lpEth100LtPrtCfg tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtPrtCfgTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.4.10.1 |
| An entry in the lpEth100LtPrtCfgTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtPrtCfgTopEntry |
|
|
| lpEth100LtPrtCfgTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.4.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtFb |
1.3.6.1.4.1.562.2.4.1.12.25.2.5 |
| OBJECT IDENTIFIER |
|
|
|
| lpEth100LtFbRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.1.1 |
| A single entry in the table represents a single
lpEth100LtFb component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbRowStatusEntry |
|
|
| lpEth100LtFbRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtFb components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtFbComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtFbStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtFb tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtFbIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.1.1.10 |
| This variable represents the index for the lpEth100LtFb tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtFbTopTable |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.20 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100LtFbTopEntry |
|
| lpEth100LtFbTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.20.1 |
| An entry in the lpEth100LtFbTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbTopEntry |
|
|
| lpEth100LtFbTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.20.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtFbTxInfoRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.1.1 |
| A single entry in the table represents a single
lpEth100LtFbTxInfo component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbTxInfoRowStatusEntry |
|
|
| lpEth100LtFbTxInfoRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtFbTxInfo components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtFbTxInfoComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtFbTxInfoStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtFbTxInfo tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtFbTxInfoIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.1.1.10 |
| This variable represents the index for the lpEth100LtFbTxInfo tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtFbTxInfoTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.10.1 |
| An entry in the lpEth100LtFbTxInfoTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbTxInfoTopEntry |
|
|
| lpEth100LtFbTxInfoTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.2.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtFbFddiMacRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.1.1 |
| A single entry in the table represents a single
lpEth100LtFbFddiMac component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbFddiMacRowStatusEntry |
|
|
| lpEth100LtFbFddiMacRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtFbFddiMac components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtFbFddiMacComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtFbFddiMacStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtFbFddiMac tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtFbFddiMacIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.1.1.10 |
| This variable represents the index for the lpEth100LtFbFddiMac tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtFbFddiMacTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.10.1 |
| An entry in the lpEth100LtFbFddiMacTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbFddiMacTopEntry |
|
|
| lpEth100LtFbFddiMacTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.3.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtFbMacEnetRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.1.1 |
| A single entry in the table represents a single
lpEth100LtFbMacEnet component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbMacEnetRowStatusEntry |
|
|
| lpEth100LtFbMacEnetRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtFbMacEnet components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtFbMacEnetComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtFbMacEnetStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtFbMacEnet tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtFbMacEnetIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.1.1.10 |
| This variable represents the index for the lpEth100LtFbMacEnet tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtFbMacEnetTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.10.1 |
| An entry in the lpEth100LtFbMacEnetTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbMacEnetTopEntry |
|
|
| lpEth100LtFbMacEnetTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.4.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtFbMacTrRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.1.1 |
| A single entry in the table represents a single
lpEth100LtFbMacTr component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbMacTrRowStatusEntry |
|
|
| lpEth100LtFbMacTrRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtFbMacTr components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtFbMacTrComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtFbMacTrStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtFbMacTr tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtFbMacTrIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.1.1.10 |
| This variable represents the index for the lpEth100LtFbMacTr tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtFbMacTrTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.10.1 |
| An entry in the lpEth100LtFbMacTrTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbMacTrTopEntry |
|
|
| lpEth100LtFbMacTrTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.5.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtFbDataRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.1.1 |
| A single entry in the table represents a single
lpEth100LtFbData component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbDataRowStatusEntry |
|
|
| lpEth100LtFbDataRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtFbData components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtFbDataComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtFbDataStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtFbData tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtFbDataIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.1.1.10 |
| This variable represents the index for the lpEth100LtFbData tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtFbDataTopTable |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100LtFbDataTopEntry |
|
| lpEth100LtFbDataTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.10.1 |
| An entry in the lpEth100LtFbDataTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbDataTopEntry |
|
|
| lpEth100LtFbDataTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.6.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtFbIpHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.1.1 |
| A single entry in the table represents a single
lpEth100LtFbIpH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbIpHRowStatusEntry |
|
|
| lpEth100LtFbIpHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtFbIpH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtFbIpHComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtFbIpHStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtFbIpH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtFbIpHIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.1.1.10 |
| This variable represents the index for the lpEth100LtFbIpH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtFbIpHTopTable |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100LtFbIpHTopEntry |
|
| lpEth100LtFbIpHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.10.1 |
| An entry in the lpEth100LtFbIpHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbIpHTopEntry |
|
|
| lpEth100LtFbIpHTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.7.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtFbLlchRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.1.1 |
| A single entry in the table represents a single
lpEth100LtFbLlch component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbLlchRowStatusEntry |
|
|
| lpEth100LtFbLlchRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtFbLlch components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtFbLlchComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtFbLlchStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtFbLlch tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtFbLlchIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.1.1.10 |
| This variable represents the index for the lpEth100LtFbLlch tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtFbLlchTopTable |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100LtFbLlchTopEntry |
|
| lpEth100LtFbLlchTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.10.1 |
| An entry in the lpEth100LtFbLlchTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbLlchTopEntry |
|
|
| lpEth100LtFbLlchTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.8.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtFbAppleHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.1.1 |
| A single entry in the table represents a single
lpEth100LtFbAppleH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbAppleHRowStatusEntry |
|
|
| lpEth100LtFbAppleHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtFbAppleH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtFbAppleHComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtFbAppleHStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtFbAppleH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtFbAppleHIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.1.1.10 |
| This variable represents the index for the lpEth100LtFbAppleH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtFbAppleHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.10.1 |
| An entry in the lpEth100LtFbAppleHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbAppleHTopEntry |
|
|
| lpEth100LtFbAppleHTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.9.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtFbIpxHRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.1.1 |
| A single entry in the table represents a single
lpEth100LtFbIpxH component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbIpxHRowStatusEntry |
|
|
| lpEth100LtFbIpxHRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtFbIpxH components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtFbIpxHComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtFbIpxHStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtFbIpxH tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtFbIpxHIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.1.1.10 |
| This variable represents the index for the lpEth100LtFbIpxH tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtFbIpxHTopTable |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100LtFbIpxHTopEntry |
|
| lpEth100LtFbIpxHTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.10.1 |
| An entry in the lpEth100LtFbIpxHTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtFbIpxHTopEntry |
|
|
| lpEth100LtFbIpxHTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.5.10.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100LtCntlRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.6.1.1 |
| A single entry in the table represents a single
lpEth100LtCntl component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtCntlRowStatusEntry |
|
|
| lpEth100LtCntlRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.2.6.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100LtCntl components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100LtCntlComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.2.6.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100LtCntlStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.2.6.1.1.4 |
| This variable represents the storage type value for the
lpEth100LtCntl tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100LtCntlIndex |
1.3.6.1.4.1.562.2.4.1.12.25.2.6.1.1.10 |
| This variable represents the index for the lpEth100LtCntl tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100LtCntlTopTable |
1.3.6.1.4.1.562.2.4.1.12.25.2.6.10 |
| This group contains the operational data for the LanTest component
and its subcomponents. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100LtCntlTopEntry |
|
| lpEth100LtCntlTopEntry |
1.3.6.1.4.1.562.2.4.1.12.25.2.6.10.1 |
| An entry in the lpEth100LtCntlTopTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100LtCntlTopEntry |
|
|
| lpEth100LtCntlTData |
1.3.6.1.4.1.562.2.4.1.12.25.2.6.10.1.1 |
| This attribute is used to display and set attributes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
AsciiString |
Size(0..255) |
|
| lpEth100Test |
1.3.6.1.4.1.562.2.4.1.12.25.3 |
| OBJECT IDENTIFIER |
|
|
|
| lpEth100TestRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.12.25.3.1.1 |
| A single entry in the table represents a single
lpEth100Test component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100TestRowStatusEntry |
|
|
| lpEth100TestRowStatus |
1.3.6.1.4.1.562.2.4.1.12.25.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
lpEth100Test components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| lpEth100TestComponentName |
1.3.6.1.4.1.562.2.4.1.12.25.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| lpEth100TestStorageType |
1.3.6.1.4.1.562.2.4.1.12.25.3.1.1.4 |
| This variable represents the storage type value for the
lpEth100Test tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| lpEth100TestIndex |
1.3.6.1.4.1.562.2.4.1.12.25.3.1.1.10 |
| This variable represents the index for the lpEth100Test tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| lpEth100TestPTOTable |
1.3.6.1.4.1.562.2.4.1.12.25.3.10 |
| This group contains the operational data for the LanPortTest
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LpEth100TestPTOEntry |
|
| lpEth100TestPTOEntry |
1.3.6.1.4.1.562.2.4.1.12.25.3.10.1 |
| An entry in the lpEth100TestPTOTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100TestPTOEntry |
|
|
| lpEth100TestType |
1.3.6.1.4.1.562.2.4.1.12.25.3.10.1.1 |
| This attribute is the type of test to be run. The available test types
include the following: card test sets up an internal loop on the board
and runs a bit error rate test; manual test assumes the line is looped
back externally and a bit error rate test is performed; localLoop test
loops back the local modem and performs a bit error rate test;
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test; externalLoop test loops back the line
to the far end; payloadLoop test only loops back the payload data
received from the incoming line; Note that localLoop, remoteLoop
and payloadLoop are not supported by all function processors. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) |
|
| lpEth100TestFrmSize |
1.3.6.1.4.1.562.2.4.1.12.25.3.10.1.2 |
| This attribute defines the size of the test data frames in number of
bytes. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
4..4096 |
|
| lpEth100TestDuration |
1.3.6.1.4.1.562.2.4.1.12.25.3.10.1.3 |
| This attribute is the duration (in minutes) that test data will be
transmitted. In the case of an externalLoop, this is the time that the
loop is in effect. Note that dataStartDelay does not apply to the
externalLoop. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..30240 |
|
| lpEth100TestResultsEntry |
1.3.6.1.4.1.562.2.4.1.12.25.3.11.1 |
| An entry in the lpEth100TestResultsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LpEth100TestResultsEntry |
|
|
| lpEth100TestElapsedTime |
1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.4 |
| This attribute is the number of minutes elapsed since the test started
for an externalLoop test. For a data test, this is the time since test
data was first transmitted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| lpEth100TestTimeRemaining |
1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.5 |
| This attribute is the number of minutes remaining before the test is
to be stopped according to the duration attribute. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| lpEth100TestCauseOfTermination |
1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.6 |
| This attribute records the reason the test is terminated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) |
|
| lpEth100TestFrmTx |
1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.7 |
| This attribute is the total number of frames sent during the test
period. This counter is not expected to reach its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpEth100TestBitsTx |
1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.8 |
| This attribute is the total number of bits sent during the test period.
This counter is not expected to reach its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpEth100TestFrmRx |
1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.9 |
| This attribute is the total number of frames received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpEth100TestBitsRx |
1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.10 |
| This attribute is the total number of bits received during the test
period. This counter is not expected to reach its maximum value.
The counter will wrap around to 0 if it does reach its maximum
value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| lpEth100TestErroredFrmRx |
1.3.6.1.4.1.562.2.4.1.12.25.3.11.1.11 |
| This attribute is the total number of errored frames received during
the test period. This counter is not expected to reach its maximum
value. The counter will wrap around to 0 if it does reach its
maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| la |
1.3.6.1.4.1.562.2.4.1.105 |
| OBJECT IDENTIFIER |
|
|
|
| laRowStatusTable |
1.3.6.1.4.1.562.2.4.1.105.1 |
| This entry controls the addition and deletion of
la components. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LaRowStatusEntry |
|
| laRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.105.1.1 |
| A single entry in the table represents a single
la component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LaRowStatusEntry |
|
|
| laRowStatus |
1.3.6.1.4.1.562.2.4.1.105.1.1.1 |
| This variable is used as the basis for SNMP naming of
la components.
These components can be added and deleted. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| laComponentName |
1.3.6.1.4.1.562.2.4.1.105.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| laStorageType |
1.3.6.1.4.1.562.2.4.1.105.1.1.4 |
| This variable represents the storage type value for the
la tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| laIndex |
1.3.6.1.4.1.562.2.4.1.105.1.1.10 |
| This variable represents the index for the la tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..255 |
|
| laCidDataTable |
1.3.6.1.4.1.562.2.4.1.105.10 |
| This group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LaCidDataEntry |
|
| laCidDataEntry |
1.3.6.1.4.1.562.2.4.1.105.10.1 |
| An entry in the laCidDataTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LaCidDataEntry |
|
|
| laCustomerIdentifier |
1.3.6.1.4.1.562.2.4.1.105.10.1.1 |
| This attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0 | 1..8191 |
|
| laLinkToProtocolPort |
1.3.6.1.4.1.562.2.4.1.105.11.1.1 |
| This attribute contains a protocol port component name. The attribute
associates the application with a protocol port. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Link |
|
|
| laIfEntryTable |
1.3.6.1.4.1.562.2.4.1.105.12 |
| This group contains the provisionable attributes for the ifEntry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LaIfEntryEntry |
|
| laIfEntryEntry |
1.3.6.1.4.1.562.2.4.1.105.12.1 |
| An entry in the laIfEntryTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LaIfEntryEntry |
|
|
| laIfAdminStatus |
1.3.6.1.4.1.562.2.4.1.105.12.1.1 |
| The desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| laIfIndex |
1.3.6.1.4.1.562.2.4.1.105.12.1.2 |
| This is the index for the IfEntry. Its value is automatically initialized
during the provisioning process. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
InterfaceIndex |
1..65535 |
|
| laStateTable |
1.3.6.1.4.1.562.2.4.1.105.13 |
| This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LaStateEntry |
|
| laStateEntry |
1.3.6.1.4.1.562.2.4.1.105.13.1 |
| An entry in the laStateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LaStateEntry |
|
|
| laAdminState |
1.3.6.1.4.1.562.2.4.1.105.13.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| laOperationalState |
1.3.6.1.4.1.562.2.4.1.105.13.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| laUsageState |
1.3.6.1.4.1.562.2.4.1.105.13.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| laOperStatusTable |
1.3.6.1.4.1.562.2.4.1.105.14 |
| This group includes the Operational Status attribute. This attribute
defines the current operational state of this component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LaOperStatusEntry |
|
| laOperStatusEntry |
1.3.6.1.4.1.562.2.4.1.105.14.1 |
| An entry in the laOperStatusTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LaOperStatusEntry |
|
|
| laSnmpOperStatus |
1.3.6.1.4.1.562.2.4.1.105.14.1.1 |
| The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| laFramer |
1.3.6.1.4.1.562.2.4.1.105.2 |
| OBJECT IDENTIFIER |
|
|
|
| laFramerRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.105.2.1.1 |
| A single entry in the table represents a single
laFramer component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LaFramerRowStatusEntry |
|
|
| laFramerRowStatus |
1.3.6.1.4.1.562.2.4.1.105.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
laFramer components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| laFramerComponentName |
1.3.6.1.4.1.562.2.4.1.105.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| laFramerStorageType |
1.3.6.1.4.1.562.2.4.1.105.2.1.1.4 |
| This variable represents the storage type value for the
laFramer tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| laFramerIndex |
1.3.6.1.4.1.562.2.4.1.105.2.1.1.10 |
| This variable represents the index for the laFramer tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| laFramerProvTable |
1.3.6.1.4.1.562.2.4.1.105.2.10 |
| This group contains the link to the Lan interface such as Ethernet, Fddi,
or TokenRing. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LaFramerProvEntry |
|
| laFramerProvEntry |
1.3.6.1.4.1.562.2.4.1.105.2.10.1 |
| An entry in the laFramerProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LaFramerProvEntry |
|
|
| laFramerInterfaceName |
1.3.6.1.4.1.562.2.4.1.105.2.10.1.1 |
| This attribute associates the LanApplication with a specific Lan interface
such as Ethernet, Fddi, or TokenRing. This also defines the
LogicalProcessor on which Framer's parent component (as well as
Framer itself) will run. This attribute is OBSOLETED and is redefined
above as InterfaceName. The new attribute type is a LIST OF LINK
with a maximum of two (2) HW components in a list.
DESCRIPTION |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Link |
|
|
| laFramerInterfaceNamesTable |
1.3.6.1.4.1.562.2.4.1.105.2.431 |
| This attribute associates the LanApplication with a specific Lan interface
such as Ethernet, Fddi, or TokenRing. This also defines the
LogicalProcessor on which Framer's parent component (as well as
Framer itself) will run. Only one (1) LAN interface can be linked to a
Framer except for Ethernet100BaseT LAN interface, for which up to
two (2) interfaces residing on the same LogicalProcessor can be linked.
DESCRIPTION |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LaFramerInterfaceNamesEntry |
|
| laFramerInterfaceNamesEntry |
1.3.6.1.4.1.562.2.4.1.105.2.431.1 |
| An entry in the laFramerInterfaceNamesTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LaFramerInterfaceNamesEntry |
|
|
| laFramerInterfaceNamesValue |
1.3.6.1.4.1.562.2.4.1.105.2.431.1.1 |
| This variable represents both the value and the index for the
laFramerInterfaceNamesTable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Link |
|
|
| laFramerInterfaceNamesRowStatus |
1.3.6.1.4.1.562.2.4.1.105.2.431.1.2 |
| This variable is used to control the addition and deletion
of individual values of the laFramerInterfaceNamesTable. |
| Status: mandatory |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|