Nortel-Magellan-Passport-TdmaIwfMIB

File: Nortel-Magellan-Passport-TdmaIwfMIB.mib (169964 bytes)

Imported modules

RFC-1212 RFC1155-SMI Nortel-Magellan-Passport-UsefulDefinitionsMIB
Nortel-Magellan-Passport-StandardTextualConventionsMIB Nortel-Magellan-Passport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE IpAddress components
passportMIBs Counter32 RowPointer
DisplayString StorageType RowStatus
Gauge32 Integer32 Unsigned32
AsciiString NonReplicated Link
FixedPoint2

Defined Types

TdmaCsRowStatusEntry  
SEQUENCE    
  tdmaCsRowStatus RowStatus
  tdmaCsComponentName DisplayString
  tdmaCsStorageType StorageType
  tdmaCsCsIndex Integer32

TdmaCsServProvEntry  
SEQUENCE    
  tdmaCsTIwf1 Unsigned32
  tdmaCsTIwf2 Unsigned32
  tdmaCsT303 Unsigned32
  tdmaCsT305 Unsigned32
  tdmaCsT308 Unsigned32
  tdmaCsT313 Unsigned32
  tdmaCsT999 Unsigned32
  tdmaCsSupportedTechnology INTEGER
  tdmaCsSupportedService INTEGER

TdmaCsMiscProvEntry  
SEQUENCE    
  tdmaCsCommentText AsciiString
  tdmaCsMscIpAddress IpAddress
  tdmaCsVirtualRouterName RowPointer
  tdmaCsVoiceLaw INTEGER

TdmaCsCidDataEntry  
SEQUENCE    
  tdmaCsCustomerIdentifier Unsigned32

TdmaCsStateEntry  
SEQUENCE    
  tdmaCsAdminState INTEGER
  tdmaCsOperationalState INTEGER
  tdmaCsUsageState INTEGER

TdmaCsStatsEntry  
SEQUENCE    
  tdmaCsCurrentCalls Gauge32
  tdmaCsCallsRequested Counter32
  tdmaCsCallsSetUp Counter32
  tdmaCsCallsReleasedNormal Counter32
  tdmaCsCallsReleasedAbnormal Counter32
  tdmaCsErroredLFrames Counter32

TdmaCsModemRowStatusEntry  
SEQUENCE    
  tdmaCsModemRowStatus RowStatus
  tdmaCsModemComponentName DisplayString
  tdmaCsModemStorageType StorageType
  tdmaCsModemIndex NonReplicated

TdmaCsFaxRowStatusEntry  
SEQUENCE    
  tdmaCsFaxRowStatus RowStatus
  tdmaCsFaxComponentName DisplayString
  tdmaCsFaxStorageType StorageType
  tdmaCsFaxIndex NonReplicated

TdmaCsDceRowStatusEntry  
SEQUENCE    
  tdmaCsDceRowStatus RowStatus
  tdmaCsDceComponentName DisplayString
  tdmaCsDceStorageType StorageType
  tdmaCsDceIndex NonReplicated

TdmaCsDscRowStatusEntry  
SEQUENCE    
  tdmaCsDscRowStatus RowStatus
  tdmaCsDscComponentName DisplayString
  tdmaCsDscStorageType StorageType
  tdmaCsDscIndex NonReplicated

TdmaCsDscProvEntry  
SEQUENCE    
  tdmaCsDscLl0BufferSize Unsigned32
  tdmaCsDscLl1BufferSize Unsigned32
  tdmaCsDscK0Ll0WindowSize Unsigned32
  tdmaCsDscK1Ll1WindowSize Unsigned32
  tdmaCsDscP0CompressionDirection INTEGER
  tdmaCsDscP1CompressionMaximumCodewords Unsigned32
  tdmaCsDscP2CompressionMaximumCharacters Unsigned32

TdmaCsRlp1RowStatusEntry  
SEQUENCE    
  tdmaCsRlp1RowStatus RowStatus
  tdmaCsRlp1ComponentName DisplayString
  tdmaCsRlp1StorageType StorageType
  tdmaCsRlp1Index INTEGER

TdmaCsRlp1ProvEntry  
SEQUENCE    
  tdmaCsRlp1T1ResponseTimer Unsigned32
  tdmaCsRlp1T2LinkActivityTimer Unsigned32
  tdmaCsRlp1T3PeerAckTimer Unsigned32

TdmaCsV42RowStatusEntry  
SEQUENCE    
  tdmaCsV42RowStatus RowStatus
  tdmaCsV42ComponentName DisplayString
  tdmaCsV42StorageType StorageType
  tdmaCsV42Index NonReplicated

TdmaCsV42ProvEntry  
SEQUENCE    
  tdmaCsV42T400DetectTimer FixedPoint2
  tdmaCsV42T401AckTimer FixedPoint2
  tdmaCsV42T402AckDelayTimer FixedPoint2
  tdmaCsV42T403IdleProbeTimer Unsigned32
  tdmaCsV42TxN401FrameSize Unsigned32
  tdmaCsV42RxN401FrameSize Unsigned32
  tdmaCsV42TxKWindowSize Unsigned32
  tdmaCsV42RxKWindowSize Unsigned32
  tdmaCsV42N400RetransLimit Unsigned32
  tdmaCsV42FcsLength INTEGER

TdmaCsV42BisRowStatusEntry  
SEQUENCE    
  tdmaCsV42BisRowStatus RowStatus
  tdmaCsV42BisComponentName DisplayString
  tdmaCsV42BisStorageType StorageType
  tdmaCsV42BisIndex NonReplicated

TdmaCsV42BisProvEntry  
SEQUENCE    
  tdmaCsV42BisP0CompressionDirection INTEGER
  tdmaCsV42BisP1MaximumCodewords Unsigned32
  tdmaCsV42BisP2MaximumStringSize Unsigned32
  tdmaCsV42BisActionOnError INTEGER

TdmaCsLpRowStatusEntry  
SEQUENCE    
  tdmaCsLpRowStatus RowStatus
  tdmaCsLpComponentName DisplayString
  tdmaCsLpStorageType StorageType
  tdmaCsLpIndex Integer32

TdmaCsLpOperEntry  
SEQUENCE    
  tdmaCsLpConfiguredBearerChannels Unsigned32
  tdmaCsLpActiveCalls Gauge32
  tdmaCsLpModemsSupported INTEGER

TdmaBcRowStatusEntry  
SEQUENCE    
  tdmaBcRowStatus RowStatus
  tdmaBcComponentName DisplayString
  tdmaBcStorageType StorageType
  tdmaBcCsIndex Integer32
  tdmaBcBcIndex Integer32

TdmaBcOperEntry  
SEQUENCE    
  tdmaBcState INTEGER
  tdmaBcCallType INTEGER
  tdmaBcLastResponseCode INTEGER
  tdmaBcMateBearerChannel RowPointer

TdmaBcCidDataEntry  
SEQUENCE    
  tdmaBcCustomerIdentifier Unsigned32

TdmaBcStateEntry  
SEQUENCE    
  tdmaBcAdminState INTEGER
  tdmaBcOperationalState INTEGER
  tdmaBcUsageState INTEGER

TdmaBcFramerRowStatusEntry  
SEQUENCE    
  tdmaBcFramerRowStatus RowStatus
  tdmaBcFramerComponentName DisplayString
  tdmaBcFramerStorageType StorageType
  tdmaBcFramerIndex NonReplicated

TdmaBcFramerProvEntry  
SEQUENCE    
  tdmaBcFramerInterfaceName Link

TdmaBcFramerStatsEntry  
SEQUENCE    
  tdmaBcFramerTxFrames Counter32
  tdmaBcFramerRxFrames Counter32
  tdmaBcFramerRxBytes Counter32

TdmaBcFramerLinkEntry  
SEQUENCE    
  tdmaBcFramerFramingType INTEGER

TdmaBcFramerStateEntry  
SEQUENCE    
  tdmaBcFramerAdminState INTEGER
  tdmaBcFramerOperationalState INTEGER
  tdmaBcFramerUsageState INTEGER

TdmaBcModemRowStatusEntry  
SEQUENCE    
  tdmaBcModemRowStatus RowStatus
  tdmaBcModemComponentName DisplayString
  tdmaBcModemStorageType StorageType
  tdmaBcModemIndex NonReplicated

TdmaBcModemOperEntry  
SEQUENCE    
  tdmaBcModemVoiceLaw INTEGER
  tdmaBcModemRate INTEGER
  tdmaBcModemModemAlgorithmInUse OCTET STRING
  tdmaBcModemProtocolState INTEGER
  tdmaBcModemMobileSideFlowControlState INTEGER
  tdmaBcModemPstnSideFlowControlState INTEGER
  tdmaBcModemAsyncMode INTEGER
  tdmaBcModemOutbandFlowControl INTEGER
  tdmaBcModemOutbandBreak INTEGER
  tdmaBcModemAutobaud INTEGER

TdmaBcModemStatsEntry  
SEQUENCE    
  tdmaBcModemTxBytes Counter32
  tdmaBcModemRxBytes Counter32
  tdmaBcModemFramingErrors Counter32

TdmaBcFaxRowStatusEntry  
SEQUENCE    
  tdmaBcFaxRowStatus RowStatus
  tdmaBcFaxComponentName DisplayString
  tdmaBcFaxStorageType StorageType
  tdmaBcFaxIndex NonReplicated

TdmaBcFaxOperEntry  
SEQUENCE    
  tdmaBcFaxActiveMode INTEGER
  tdmaBcFaxProtocolState INTEGER
  tdmaBcFaxMessageRate Unsigned32

TdmaBcFaxStatsEntry  
SEQUENCE    
  tdmaBcFaxTxPagesToMobile Counter32
  tdmaBcFaxRxPagesFromMobile Counter32

TdmaBcDceRowStatusEntry  
SEQUENCE    
  tdmaBcDceRowStatus RowStatus
  tdmaBcDceComponentName DisplayString
  tdmaBcDceStorageType StorageType
  tdmaBcDceIndex NonReplicated

TdmaBcDscRowStatusEntry  
SEQUENCE    
  tdmaBcDscRowStatus RowStatus
  tdmaBcDscComponentName DisplayString
  tdmaBcDscStorageType StorageType
  tdmaBcDscIndex NonReplicated

TdmaBcDscOperEntry  
SEQUENCE    
  tdmaBcDscP0CompressionDirection INTEGER
  tdmaBcDscP1CompressionMaximumCodewords Unsigned32
  tdmaBcDscP2CompressionMaximumCharacters Unsigned32

TdmaBcDscStatsEntry  
SEQUENCE    
  tdmaBcDscTxBytes Counter32
  tdmaBcDscRxBytes Counter32

TdmaBcRlp1RowStatusEntry  
SEQUENCE    
  tdmaBcRlp1RowStatus RowStatus
  tdmaBcRlp1ComponentName DisplayString
  tdmaBcRlp1StorageType StorageType
  tdmaBcRlp1Index NonReplicated

TdmaBcRlp1OperEntry  
SEQUENCE    
  tdmaBcRlp1Layer3L0ReqWinSize Unsigned32
  tdmaBcRlp1Layer3L1ReqWinSize1 Unsigned32
  tdmaBcRlp1T1ResponseTimer Unsigned32
  tdmaBcRlp1T2LinkActivityTimer Unsigned32
  tdmaBcRlp1T3PeerAckTimer Unsigned32

TdmaBcRlp1StatsEntry  
SEQUENCE    
  tdmaBcRlp1TxFrames Counter32
  tdmaBcRlp1RxFrames Counter32
  tdmaBcRlp1BadRxFrames Counter32

TdmaBcV42RowStatusEntry  
SEQUENCE    
  tdmaBcV42RowStatus RowStatus
  tdmaBcV42ComponentName DisplayString
  tdmaBcV42StorageType StorageType
  tdmaBcV42Index NonReplicated

TdmaBcV42OperEntry  
SEQUENCE    
  tdmaBcV42ProtocolState INTEGER
  tdmaBcV42TxN401FrameSize Unsigned32
  tdmaBcV42RxN401FrameSize Unsigned32
  tdmaBcV42TxKWindowSize Unsigned32
  tdmaBcV42RxKWindowSize Unsigned32
  tdmaBcV42V42ActiveInCall INTEGER
  tdmaBcV42V42BisActiveInCall INTEGER

TdmaBcV42StatsEntry  
SEQUENCE    
  tdmaBcV42RxIBytes Counter32
  tdmaBcV42TxIBytes Counter32
  tdmaBcV42RxIFrames Counter32
  tdmaBcV42TxIFrames Counter32
  tdmaBcV42RetransmittedFrames Counter32
  tdmaBcV42T1AckTimeouts Counter32
  tdmaBcV42RemoteBusyIndications Counter32
  tdmaBcV42LocalBusyIndications Counter32
  tdmaBcV42BadFramesRx Counter32
  tdmaBcV42CrcErrorsRx Counter32

TdmaBcV42BisRowStatusEntry  
SEQUENCE    
  tdmaBcV42BisRowStatus RowStatus
  tdmaBcV42BisComponentName DisplayString
  tdmaBcV42BisStorageType StorageType
  tdmaBcV42BisIndex NonReplicated

TdmaBcV42BisOperEntry  
SEQUENCE    
  tdmaBcV42BisProtocolModeEncoder INTEGER
  tdmaBcV42BisProtocolModeDecoder INTEGER
  tdmaBcV42BisP0CompressionDirection INTEGER
  tdmaBcV42BisP1MaximumCodewords Unsigned32
  tdmaBcV42BisP2MaximumStringSize Unsigned32
  tdmaBcV42BisLastDecodeError INTEGER
  tdmaBcV42BisCompRatioEncoder FixedPoint2
  tdmaBcV42BisCompRatioDecoder FixedPoint2

TdmaBcV42BisStatsEntry  
SEQUENCE    
  tdmaBcV42BisModeChangesEncode Counter32
  tdmaBcV42BisModeChangesDecode Counter32
  tdmaBcV42BisResetsEncode Counter32
  tdmaBcV42BisResetsDecode Counter32
  tdmaBcV42BisReinitializations Counter32
  tdmaBcV42BisErrorsInDecode Counter32

TdmaBcUrRowStatusEntry  
SEQUENCE    
  tdmaBcUrRowStatus RowStatus
  tdmaBcUrComponentName DisplayString
  tdmaBcUrStorageType StorageType
  tdmaBcUrIndex NonReplicated

TdmaBcUrOperEntry  
SEQUENCE    
  tdmaBcUrRxBufferSize Unsigned32
  tdmaBcUrTxFlowControlState INTEGER
  tdmaBcUrRxFlowControlState INTEGER

TdmaBcUrStatsEntry  
SEQUENCE    
  tdmaBcUrTxFrames Counter32
  tdmaBcUrRxFrames Counter32
  tdmaBcUrUnacknowledgedFrames Counter32
  tdmaBcUrCumUnacknowledgedFrames Counter32

Defined Values

tdmaIwfMIB 1.3.6.1.4.1.562.2.4.2.140
OBJECT IDENTIFIER    

tdmaCs 1.3.6.1.4.1.562.2.4.1.135
OBJECT IDENTIFIER    

tdmaCsRowStatusTable 1.3.6.1.4.1.562.2.4.1.135.1
This entry controls the addition and deletion of tdmaCs components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsRowStatusEntry

tdmaCsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.135.1.1
A single entry in the table represents a single tdmaCs component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsRowStatusEntry  

tdmaCsRowStatus 1.3.6.1.4.1.562.2.4.1.135.1.1.1
This variable is used as the basis for SNMP naming of tdmaCs components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

tdmaCsComponentName 1.3.6.1.4.1.562.2.4.1.135.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaCsStorageType 1.3.6.1.4.1.562.2.4.1.135.1.1.4
This variable represents the storage type value for the tdmaCs tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaCsCsIndex 1.3.6.1.4.1.562.2.4.1.135.1.1.10
This variable represents the index for the tdmaCs tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..10  

tdmaCsServProvTable 1.3.6.1.4.1.562.2.4.1.135.100
This group contains all the necessary timers for call setup and call clearing scenarios on the IWF.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsServProvEntry

tdmaCsServProvEntry 1.3.6.1.4.1.562.2.4.1.135.100.1
An entry in the tdmaCsServProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsServProvEntry  

tdmaCsTIwf1 1.3.6.1.4.1.562.2.4.1.135.100.1.1
This is an internal timer to the call server of the IWF and is used during call setup for ensuring the MIT protocol stack and the NIT modem for a new call have been allocated and initialized.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3600  

tdmaCsTIwf2 1.3.6.1.4.1.562.2.4.1.135.100.1.2
This is an internal timer to the call server of the IWF and is used during call clearing for ensuring the MIT protocol stack and NIT modem for a call have been deallocated correctly.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3600  

tdmaCsT303 1.3.6.1.4.1.562.2.4.1.135.100.1.3
This timer is a call setup timer and is used for ensuring a CallProceeding message is received for a Setup message that has been sent by the IWF to the MTX.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3600  

tdmaCsT305 1.3.6.1.4.1.562.2.4.1.135.100.1.4
This timer is a call clearing timer and is used for ensuring a Release message is received for a Disconnect message the IWF has sent to the MTX.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3600  

tdmaCsT308 1.3.6.1.4.1.562.2.4.1.135.100.1.5
This timer is a call clearing timer and is used for ensuring a ReleaseComplete message is received for the Release message the IWF has sent to the MTX.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3600  

tdmaCsT313 1.3.6.1.4.1.562.2.4.1.135.100.1.6
This is a call setup timer and is used for ensuring a ConnectAck message is received in response for the Connect message the IWF has sent to the MTX.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3600  

tdmaCsT999 1.3.6.1.4.1.562.2.4.1.135.100.1.7
This timer is used during a mobile termination call setup and is used for ensuring the Setup message is received from the MTX.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3600  

tdmaCsSupportedTechnology 1.3.6.1.4.1.562.2.4.1.135.100.1.8
This attribute specifies the wireless technology that is supported for data calls on this IWF.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tdmaOnly(0), cdmaOnly(1), tdmaAndCdma(2)  

tdmaCsSupportedService 1.3.6.1.4.1.562.2.4.1.135.100.1.9
This attribute specifies the type(s) of data calls this IWF supports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER asyncDataOnly(0), g3FaxOnly(1), analogFaxOnly(2), packetOnly(3), asyncDataAndG3Fax(4), asyncDataAndAnalogFax(5), asyncDataAndPacket(6), asyncDataG3FaxAndPacket(7), asyncDataAFaxAndPacket(8)  

tdmaCsMiscProvTable 1.3.6.1.4.1.562.2.4.1.135.101
This group contains general provisioning data for the TdmaIwfCallServer that does not fit within other provisioning groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsMiscProvEntry

tdmaCsMiscProvEntry 1.3.6.1.4.1.562.2.4.1.135.101.1
An entry in the tdmaCsMiscProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsMiscProvEntry  

tdmaCsCommentText 1.3.6.1.4.1.562.2.4.1.135.101.1.1
Use of this attribute is at the discretion of the system administrator. Typically, this attribute is used to specify the name of the DMS- MTX configured for this TdmaIwfCallServer plus any other commentary information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..40)  

tdmaCsMscIpAddress 1.3.6.1.4.1.562.2.4.1.135.101.1.2
This attribute specifies the Internet Protocol (IP) Address of the Mobile Telephone Exchange (MTX) that is permitted to set up MTX InterWorking Function (IWF) data calls using this TdmaIwfCallServer. This address must be specified in order for this TdmaIwfCallServer to provide service. If call setups are attempted from an MSC which does not have this address, those calls are rejected. The callsRequested statistic of this TdmaIwfCallServer is incremented and appropriate call failure logs are generated at the MSC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

tdmaCsVirtualRouterName 1.3.6.1.4.1.562.2.4.1.135.101.1.3
This attribute specifies the virtual router that this TdmaIwfCallServer uses for transmitting and receiving signaling messages to and from the DMS-MTX.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowPointer  

tdmaCsVoiceLaw 1.3.6.1.4.1.562.2.4.1.135.101.1.4
This attribute specifies the voice law to be established for the IWF to PSTN modem link for calls established by this TdmaIwfCallServer. This attribute has one of the following values: aLaw: A protocol for encoding voice-band audio, Pulse Code Modulation (PCM). muLaw: A protocol for encoding voice-band audio, PCM. Note that this value must match the voice law used at the DMS- MTX connected to this TdmaIwfCallServer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER aLaw(0), muLaw(1)  

tdmaCsCidDataTable 1.3.6.1.4.1.562.2.4.1.135.103
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsCidDataEntry

tdmaCsCidDataEntry 1.3.6.1.4.1.562.2.4.1.135.103.1
An entry in the tdmaCsCidDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsCidDataEntry  

tdmaCsCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.135.103.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

tdmaCsStateTable 1.3.6.1.4.1.562.2.4.1.135.104
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsStateEntry

tdmaCsStateEntry 1.3.6.1.4.1.562.2.4.1.135.104.1
An entry in the tdmaCsStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsStateEntry  

tdmaCsAdminState 1.3.6.1.4.1.562.2.4.1.135.104.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

tdmaCsOperationalState 1.3.6.1.4.1.562.2.4.1.135.104.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

tdmaCsUsageState 1.3.6.1.4.1.562.2.4.1.135.104.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

tdmaCsStatsTable 1.3.6.1.4.1.562.2.4.1.135.121
This group contains operational attributes that measure the performance used for the calls set up by this particular TdmaIwfCallServer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsStatsEntry

tdmaCsStatsEntry 1.3.6.1.4.1.562.2.4.1.135.121.1
An entry in the tdmaCsStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsStatsEntry  

tdmaCsCurrentCalls 1.3.6.1.4.1.562.2.4.1.135.121.1.1
This attribute indicates the number of active calls currently serviced by this particular TdmaIwfCallServer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2047  

tdmaCsCallsRequested 1.3.6.1.4.1.562.2.4.1.135.121.1.2
This attribute counts the number of IWF call setup requests received at this particular TdmaIwfCallServer from the DMS-MTX. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaCsCallsSetUp 1.3.6.1.4.1.562.2.4.1.135.121.1.3
This attribute counts the number of IWF calls successfully setup by this particular TdmaIwfCallServer. A call is considered setup when the IWF-Setup-Request message is received, indicating a request for a data communications service, and the IWF has successfully allocated the necessary resources to fulfill the request. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaCsCallsReleasedNormal 1.3.6.1.4.1.562.2.4.1.135.121.1.4
This attribute counts the number of IWF calls that have completed successfully on this particular TdmaIwfCallServer. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaCsCallsReleasedAbnormal 1.3.6.1.4.1.562.2.4.1.135.121.1.5
This attribute counts the number of IWF calls that have been released due to error conditions at this particular TdmaIwfCallServer or one if its TdmaIwfBearerChannel(s). The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaCsErroredLFrames 1.3.6.1.4.1.562.2.4.1.135.121.1.6
This attribute counts the number of CM/IWF Control Interface (CCI) messages received from the DMS-MTX that have an incorrect format. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaCsModem 1.3.6.1.4.1.562.2.4.1.135.2
OBJECT IDENTIFIER    

tdmaCsModemRowStatusTable 1.3.6.1.4.1.562.2.4.1.135.2.1
This entry controls the addition and deletion of tdmaCsModem components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsModemRowStatusEntry

tdmaCsModemRowStatusEntry 1.3.6.1.4.1.562.2.4.1.135.2.1.1
A single entry in the table represents a single tdmaCsModem component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsModemRowStatusEntry  

tdmaCsModemRowStatus 1.3.6.1.4.1.562.2.4.1.135.2.1.1.1
This variable is used as the basis for SNMP naming of tdmaCsModem components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaCsModemComponentName 1.3.6.1.4.1.562.2.4.1.135.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaCsModemStorageType 1.3.6.1.4.1.562.2.4.1.135.2.1.1.4
This variable represents the storage type value for the tdmaCsModem tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaCsModemIndex 1.3.6.1.4.1.562.2.4.1.135.2.1.1.10
This variable represents the index for the tdmaCsModem tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaCsFax 1.3.6.1.4.1.562.2.4.1.135.3
OBJECT IDENTIFIER    

tdmaCsFaxRowStatusTable 1.3.6.1.4.1.562.2.4.1.135.3.1
This entry controls the addition and deletion of tdmaCsFax components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsFaxRowStatusEntry

tdmaCsFaxRowStatusEntry 1.3.6.1.4.1.562.2.4.1.135.3.1.1
A single entry in the table represents a single tdmaCsFax component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsFaxRowStatusEntry  

tdmaCsFaxRowStatus 1.3.6.1.4.1.562.2.4.1.135.3.1.1.1
This variable is used as the basis for SNMP naming of tdmaCsFax components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaCsFaxComponentName 1.3.6.1.4.1.562.2.4.1.135.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaCsFaxStorageType 1.3.6.1.4.1.562.2.4.1.135.3.1.1.4
This variable represents the storage type value for the tdmaCsFax tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaCsFaxIndex 1.3.6.1.4.1.562.2.4.1.135.3.1.1.10
This variable represents the index for the tdmaCsFax tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaCsDce 1.3.6.1.4.1.562.2.4.1.135.4
OBJECT IDENTIFIER    

tdmaCsDceRowStatusTable 1.3.6.1.4.1.562.2.4.1.135.4.1
This entry controls the addition and deletion of tdmaCsDce components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsDceRowStatusEntry

tdmaCsDceRowStatusEntry 1.3.6.1.4.1.562.2.4.1.135.4.1.1
A single entry in the table represents a single tdmaCsDce component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsDceRowStatusEntry  

tdmaCsDceRowStatus 1.3.6.1.4.1.562.2.4.1.135.4.1.1.1
This variable is used as the basis for SNMP naming of tdmaCsDce components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaCsDceComponentName 1.3.6.1.4.1.562.2.4.1.135.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaCsDceStorageType 1.3.6.1.4.1.562.2.4.1.135.4.1.1.4
This variable represents the storage type value for the tdmaCsDce tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaCsDceIndex 1.3.6.1.4.1.562.2.4.1.135.4.1.1.10
This variable represents the index for the tdmaCsDce tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaCsDsc 1.3.6.1.4.1.562.2.4.1.135.5
OBJECT IDENTIFIER    

tdmaCsDscRowStatusTable 1.3.6.1.4.1.562.2.4.1.135.5.1
This entry controls the addition and deletion of tdmaCsDsc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsDscRowStatusEntry

tdmaCsDscRowStatusEntry 1.3.6.1.4.1.562.2.4.1.135.5.1.1
A single entry in the table represents a single tdmaCsDsc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsDscRowStatusEntry  

tdmaCsDscRowStatus 1.3.6.1.4.1.562.2.4.1.135.5.1.1.1
This variable is used as the basis for SNMP naming of tdmaCsDsc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaCsDscComponentName 1.3.6.1.4.1.562.2.4.1.135.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaCsDscStorageType 1.3.6.1.4.1.562.2.4.1.135.5.1.1.4
This variable represents the storage type value for the tdmaCsDsc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaCsDscIndex 1.3.6.1.4.1.562.2.4.1.135.5.1.1.10
This variable represents the index for the tdmaCsDsc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaCsDscProvTable 1.3.6.1.4.1.562.2.4.1.135.5.10
This group contains the provisionable attributes for Data Service Control Asynchronous Data Service portion of the wireless protocol stack used for the calls set up by this particular TdmaIwfCallServer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsDscProvEntry

tdmaCsDscProvEntry 1.3.6.1.4.1.562.2.4.1.135.5.10.1
An entry in the tdmaCsDscProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsDscProvEntry  

tdmaCsDscLl0BufferSize 1.3.6.1.4.1.562.2.4.1.135.5.10.1.1
This attribute specifies the maximum size of the DSC logical link 0 control buffer. Changes impact the amount of memory used (more memory is used when increasing the attribute). The gain in performance obtained from the selection of a larger buffer size may be offset by less memory being available. The customer might wish to increase the buffer size when a degradation in throughput of the system is seen.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 80..65535  

tdmaCsDscLl1BufferSize 1.3.6.1.4.1.562.2.4.1.135.5.10.1.2
This attribute specifies the maximum size of the DSC logical link 1 data buffer. Changes impact the amount of memory used (more memory is used when increasing the attribute). The gain in performance obtained from the selection of a larger buffer size may be offset by less memory being available. The customer might wish to increase the buffer size when a degradation in throughput of the system is seen.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 160..65535  

tdmaCsDscK0Ll0WindowSize 1.3.6.1.4.1.562.2.4.1.135.5.10.1.3
This attribute specifies the maximum size of the DSC logical link 0 window.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..64  

tdmaCsDscK1Ll1WindowSize 1.3.6.1.4.1.562.2.4.1.135.5.10.1.4
This attribute specifies the maximum size of the DSC logical link 1 window.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..64  

tdmaCsDscP0CompressionDirection 1.3.6.1.4.1.562.2.4.1.135.5.10.1.5
This attribute specifies the compression configuration for DSC. This attribute has one of the following values: noCompression: No compression. compInitrResp: Compression initiator to responder. compRespInitr: Compression responder to initiator. compBoth: Compression both directions.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER noCompression(0), compInitrResp(1), compRespInitr(2), compBoth(3)  

tdmaCsDscP1CompressionMaximumCodewords 1.3.6.1.4.1.562.2.4.1.135.5.10.1.6
This attribute specifies the maximum number of codewords to be used for compression. A codeword is a binary number that represents a string of characters. Changes to this attribute impact the amount of memory used (more memory is used when increasing the attribute). The gain in performance obtained from the selection of a larger dictionary may be offset by the larger codeword size needed, and for certain types of data, better performance may be obtained by using a smaller dictionary. Changes to this attribute do not affect existing calls.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 512..4096  

tdmaCsDscP2CompressionMaximumCharacters 1.3.6.1.4.1.562.2.4.1.135.5.10.1.7
This attribute specifies the maximum number of characters that can be represented by a single codeword to be used for compression from logical link 0.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 6..150  

tdmaCsRlp1 1.3.6.1.4.1.562.2.4.1.135.6
OBJECT IDENTIFIER    

tdmaCsRlp1RowStatusTable 1.3.6.1.4.1.562.2.4.1.135.6.1
This entry controls the addition and deletion of tdmaCsRlp1 components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsRlp1RowStatusEntry

tdmaCsRlp1RowStatusEntry 1.3.6.1.4.1.562.2.4.1.135.6.1.1
A single entry in the table represents a single tdmaCsRlp1 component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsRlp1RowStatusEntry  

tdmaCsRlp1RowStatus 1.3.6.1.4.1.562.2.4.1.135.6.1.1.1
This variable is used as the basis for SNMP naming of tdmaCsRlp1 components. These components can be added.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

tdmaCsRlp1ComponentName 1.3.6.1.4.1.562.2.4.1.135.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaCsRlp1StorageType 1.3.6.1.4.1.562.2.4.1.135.6.1.1.4
This variable represents the storage type value for the tdmaCsRlp1 tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaCsRlp1Index 1.3.6.1.4.1.562.2.4.1.135.6.1.1.10
This variable represents the index for the tdmaCsRlp1 tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER halfRate(0), fullRate(1), doubleRate(2), tripleRate(3)  

tdmaCsRlp1ProvTable 1.3.6.1.4.1.562.2.4.1.135.6.10
This group contains provisionable attributes for the Radio Link Protocol 1 (RLP1) parameters used for the calls set up by this particular TdmaIwfCallServer. Changes to these attributes do not affect existing calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsRlp1ProvEntry

tdmaCsRlp1ProvEntry 1.3.6.1.4.1.562.2.4.1.135.6.10.1
An entry in the tdmaCsRlp1ProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsRlp1ProvEntry  

tdmaCsRlp1T1ResponseTimer 1.3.6.1.4.1.562.2.4.1.135.6.10.1.1
This attribute specifies the time the receiving Radio Link Protocol (RLP1) entity shall wait for a response from the peer TIA-136-310 (formerly IS-130) application. During the Exchange Information (XID) negotiation, both RLP1 entities (mobile station and IWF) can agree to use a specific value for this timer (T1). The IWF attempts to negotiate to the value specified by this attribute. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 5..20  

tdmaCsRlp1T2LinkActivityTimer 1.3.6.1.4.1.562.2.4.1.135.6.10.1.2
This attribute specifies the maximum time the receiving Radio Link Protocol (RLP1) entity shall wait for link activity. During the Exchange Information (XID) negotiation, both RLP1 entities (mobile station and IWF) can agree to use a specific value for this timer (T2). The IWF attempts to negotiate to the value specified by this attribute. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 10..120  

tdmaCsRlp1T3PeerAckTimer 1.3.6.1.4.1.562.2.4.1.135.6.10.1.3
This attribute specifies the maximum time the receiving Radio Link Protocol (RLP1) entity shall wait for the peer to ACK or NAK data. During the Exchange Information (XID) negotiation, both RLP1 entities (mobile station and IWF) can agree to use a specific value for this timer (T3). The IWF attempts to negotiate to the value specified by this attribute. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 5..20  

tdmaCsV42 1.3.6.1.4.1.562.2.4.1.135.7
OBJECT IDENTIFIER    

tdmaCsV42RowStatusTable 1.3.6.1.4.1.562.2.4.1.135.7.1
This entry controls the addition and deletion of tdmaCsV42 components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsV42RowStatusEntry

tdmaCsV42RowStatusEntry 1.3.6.1.4.1.562.2.4.1.135.7.1.1
A single entry in the table represents a single tdmaCsV42 component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsV42RowStatusEntry  

tdmaCsV42RowStatus 1.3.6.1.4.1.562.2.4.1.135.7.1.1.1
This variable is used as the basis for SNMP naming of tdmaCsV42 components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaCsV42ComponentName 1.3.6.1.4.1.562.2.4.1.135.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaCsV42StorageType 1.3.6.1.4.1.562.2.4.1.135.7.1.1.4
This variable represents the storage type value for the tdmaCsV42 tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaCsV42Index 1.3.6.1.4.1.562.2.4.1.135.7.1.1.10
This variable represents the index for the tdmaCsV42 tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaCsV42ProvTable 1.3.6.1.4.1.562.2.4.1.135.7.10
This group contains the provisionable attributes for the V.42 protocol used for the calls set up by this particular IwfCallServer. Changes to these attributes do not affect existing calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsV42ProvEntry

tdmaCsV42ProvEntry 1.3.6.1.4.1.562.2.4.1.135.7.10.1
An entry in the tdmaCsV42ProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsV42ProvEntry  

tdmaCsV42T400DetectTimer 1.3.6.1.4.1.562.2.4.1.135.7.10.1.1
This attribute specifies the maximum amount of time that the IWF waits for an Originator Detection Pattern (ODP) or Answerer Detection Pattern (ADP). ODP/ADP is a series of special bit patterns used during the call setup procedures. If the IWF is the originator of the call, it starts sending ODP patterns and waits for an ADP for the duration of T400 from the answerer at call setup time. If the IWF is the answerer of the call, it waits for an ODP for T400 seconds from the originator and if it receives during that time it sends an ADP pattern to the originator at the call setup time. Since both sides operate with different values of T400 timer, a higher value increases the chance of a successful call setup. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint2 75..254  

tdmaCsV42T401AckTimer 1.3.6.1.4.1.562.2.4.1.135.7.10.1.2
This attribute specifies the maximum amount of time that the IWF waits for an acknowledgment before retransmitting a frame. Since information about the T401 timer is not carried in the Exchange Identification (XID) negotiations at call setup time, both sides operate with different timer values. The value for T401 depends on many factors, such as propagation delay or frame processing time. A frame is retransmitted up to N400 times if the timer T401 expires before an acknowledgment for a frame is actually received. The performance of the data link layer can be impacted by the value of this timer as retransmissions of frames occur on expiry of timer T401. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint2 50..900  

tdmaCsV42T402AckDelayTimer 1.3.6.1.4.1.562.2.4.1.135.7.10.1.3
This attribute specifies the maximum amount of time that the IWF may wait following the receipt of any frame requiring a reply before it initiates transmission of an appropriate reply in order to ensure that the reply frame is received by the remote error-correcting entity prior to expiration of the T401 timer of the remote error-correcting entity. Since information about the T402 timer is not carried in the Exchange Identification (XID) negotiations at call setup, both sides operate with different timer values. If this timer expires, then the reply that would have been returned prior to its expiration is not sent. The performance of the data link layer can be impacted by the value of this timer as retransmissions of frames occur on expiry of timer T401. For better performance, a value of t402AckDelayTimer (T402) equal to half the value of t401AckTimer (T401) is recommended. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FixedPoint2 25..450  

tdmaCsV42T403IdleProbeTimer 1.3.6.1.4.1.562.2.4.1.135.7.10.1.4
This attribute specifies the maximum amount of time that the IWF allows to elapse without frames being exchanged. The link is permitted to remain idle with no frames being exchanged on the data link. Upon expiry of this timer, the IWF polls its peer for status. Since information about the T403 timer is not carried in the Exchange Identification (XID) negotiations at call setup time, both sides operate with different timer values. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 30..90  

tdmaCsV42TxN401FrameSize 1.3.6.1.4.1.562.2.4.1.135.7.10.1.5
This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) frame, and a Unnumbered Information (UI) frame from the IWF to the remote entity. The default value is 128 octets, and no XID negotiations required for txN401FrameSize. If the value for txN401FrameSize value is set to other than 128 octets, then XID frames are exchanged to negotiate a value. The value provided for txN401FrameSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 128 is specified, then the IWF negotiates or attempts to negotiate a value between the 128 (as a minimum) and the given value (as a maximum). If a value less than 128 is specified, then the IWF attempts to negotiate a value between the given value (as a minimum) and 128 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to 128 is recommended. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

tdmaCsV42RxN401FrameSize 1.3.6.1.4.1.562.2.4.1.135.7.10.1.6
This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) frame, and a Unnumbered Information (UI) frame from the remote entity to the IWF. The default value is 128 octets, and no XID negotiations are required for rxN401FrameSize. If the value set for rxN401FrameSize is other than 128, XID frames are exchanged to negotiate a value. The value provided for rxN401FrameSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 128 is specified, then the IWF attempts to negotiate for a value between 128 (as a minimum) and the given value (as a maximum). If a value less than 128 value is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 128 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to the default is recommended. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

tdmaCsV42TxKWindowSize 1.3.6.1.4.1.562.2.4.1.135.7.10.1.7
This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the IWF to the remote entity. The default value is 15 frames, and if this value is used then no Exchange Identification (XID) negotiations are required for txKWindowSize. If the value set for txKWindowSize is other than 15, then XID frames are exchanged to negotiate a value. The value provided for txKWindowSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 15 is specified, then the IWF attempts to negotiate a value between 15 (as a minimum) and the given value (as a maximum). If a value less than 15 is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 15 (as a maximum). Any value can be specified as long at it is within the provisionable limits. However, a value equal to or close to the default is recommended. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

tdmaCsV42RxKWindowSize 1.3.6.1.4.1.562.2.4.1.135.7.10.1.8
This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the remote entity to the IWF. The default value is 15 frames, and if this value is used then no Exchange Identification (XID) negotiations are required for rxKWindowSize. If the value set for rxKWindowSize is other than 15, then XID frames are exchanged to negotiate a value. The value provided for rxKWindowSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 15 is specified, then the IWF attempts to negotiate a value between 15 (as a minimum) and the given value (as a maximum). If a value less than 15 is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 15 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to the default is recommended. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

tdmaCsV42N400RetransLimit 1.3.6.1.4.1.562.2.4.1.135.7.10.1.9
This attribute specifies the maximum number of times the IWF retransmits a frame upon expiry of t401AckTimer before appropriate recovery action is taken. Information about N400 (Retransmission Limit) is not carried in the Exchange Identification (XID) negotiation at call setup time so both sides operate with different N400 values. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

tdmaCsV42FcsLength 1.3.6.1.4.1.562.2.4.1.135.7.10.1.10
This attribute specifies whether a 16 bit or a 32 bit Frame Check Sequence (FCS) will be used for the link between the IWF and the far end DCE. This attribute has one of the following values: fcs16: Use only a 16 bit FCS. fcs32Or16: 32 bit FCS is preferred; Use a 16 bit FCS if needed. fcs32Only: Use only a 32 it FCS; If unavailable, drop the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fcs16(0), fcs32Or16(1), fcs32(2)  

tdmaCsV42Bis 1.3.6.1.4.1.562.2.4.1.135.8
OBJECT IDENTIFIER    

tdmaCsV42BisRowStatusTable 1.3.6.1.4.1.562.2.4.1.135.8.1
This entry controls the addition and deletion of tdmaCsV42Bis components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsV42BisRowStatusEntry

tdmaCsV42BisRowStatusEntry 1.3.6.1.4.1.562.2.4.1.135.8.1.1
A single entry in the table represents a single tdmaCsV42Bis component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsV42BisRowStatusEntry  

tdmaCsV42BisRowStatus 1.3.6.1.4.1.562.2.4.1.135.8.1.1.1
This variable is used as the basis for SNMP naming of tdmaCsV42Bis components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaCsV42BisComponentName 1.3.6.1.4.1.562.2.4.1.135.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaCsV42BisStorageType 1.3.6.1.4.1.562.2.4.1.135.8.1.1.4
This variable represents the storage type value for the tdmaCsV42Bis tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaCsV42BisIndex 1.3.6.1.4.1.562.2.4.1.135.8.1.1.10
This variable represents the index for the tdmaCsV42Bis tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaCsV42BisProvTable 1.3.6.1.4.1.562.2.4.1.135.8.10
This group contains the provisionable attributes for the V.42bis data compression protocol parameters used for the calls set up by this particular CallServer. Changes to these attributes do not affect existing calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsV42BisProvEntry

tdmaCsV42BisProvEntry 1.3.6.1.4.1.562.2.4.1.135.8.10.1
An entry in the tdmaCsV42BisProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsV42BisProvEntry  

tdmaCsV42BisP0CompressionDirection 1.3.6.1.4.1.562.2.4.1.135.8.10.1.1
This attribute specifies the V.42bis data compression direction to be supported. The value for compression direction is negotiated at link setup by the data link protocol by way of the Exchange Identification (XID) negotiation of parameter P0 (compression direction). During XID negotiation of parameter P0, both sides (IWF and mobile or IWF and PSTN) agree on the compression direction. This attribute has one of the following values: noCompression: No compression is present. compInitrResp: The data sent by the IWF to the other entity is compressed. compRespInitr: The data received by the IWF from the other entity is compressed. compBoth: The data sent and received by the IWF is compressed. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noCompression(0), compInitrResp(1), compRespInitr(2), compBoth(3)  

tdmaCsV42BisP1MaximumCodewords 1.3.6.1.4.1.562.2.4.1.135.8.10.1.2
This attribute specifies the maximum number of V.42bis codewords the IWF supports. A codeword is a binary number that represents a string of characters in compressed form. V.42bis keeps a dictionary of codewords for each compression direction. Changes to this attribute impact the compression ratio for the encoder (component TdmaBc V42Bis attribute compRatioEncoder). Changes also impact the amount of memory used (more memory is used when increasing the attribute). The gain in performance obtained from the selection of a larger dictionary may be offset by the larger codeword size needed, and for certain types of data, better performance may be obtained by using a smaller dictionary. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 512..4096  

tdmaCsV42BisP2MaximumStringSize 1.3.6.1.4.1.562.2.4.1.135.8.10.1.3
This attribute specifies the maximum number of characters allowed in a string represented by a codeword that the IWF supports. Each codeword in a V.42bis dictionary represents a string of characters. Changes to this attribute impact the compression ratio for the encoder. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 6..250  

tdmaCsV42BisActionOnError 1.3.6.1.4.1.562.2.4.1.135.8.10.1.4
This attribute specifies whether or not V.42bis takes down the call or resets the link when any of the following errors occur: 1.Receipt of STEPUP (step up codeword size) codeword when it would cause C2 (current code word size) to exceed N1 (maximum code word size). 2. Receipt of a codeword, at any time, equal to C1 (next empty dictionary entry). 3. Receipt of a codeword representing an empty dictionary entry. 4. Receipt of a reserved command code. 5. Receipt of any other error. If the value is resetLink, the error corrected connection and V.42bis dictionaries are reset. Some data is lost but the call continues. If the value is takeDownCall, the call is taken down. Changes to this attribute do not affect existing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER resetLink(0), takeDownCall(1)  

tdmaCsLp 1.3.6.1.4.1.562.2.4.1.135.9
OBJECT IDENTIFIER    

tdmaCsLpRowStatusTable 1.3.6.1.4.1.562.2.4.1.135.9.1
This entry controls the addition and deletion of tdmaCsLp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsLpRowStatusEntry

tdmaCsLpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.135.9.1.1
A single entry in the table represents a single tdmaCsLp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsLpRowStatusEntry  

tdmaCsLpRowStatus 1.3.6.1.4.1.562.2.4.1.135.9.1.1.1
This variable is used as the basis for SNMP naming of tdmaCsLp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

tdmaCsLpComponentName 1.3.6.1.4.1.562.2.4.1.135.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaCsLpStorageType 1.3.6.1.4.1.562.2.4.1.135.9.1.1.4
This variable represents the storage type value for the tdmaCsLp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaCsLpIndex 1.3.6.1.4.1.562.2.4.1.135.9.1.1.10
This variable represents the index for the tdmaCsLp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

tdmaCsLpOperTable 1.3.6.1.4.1.562.2.4.1.135.9.10
This group contains operational attributes pertaining to information about TdmaIwfBearerChannels and TdmaIwfLogicalProcessor associated with a TdmaIwfCallServer from a high-level view.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaCsLpOperEntry

tdmaCsLpOperEntry 1.3.6.1.4.1.562.2.4.1.135.9.10.1
An entry in the tdmaCsLpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaCsLpOperEntry  

tdmaCsLpConfiguredBearerChannels 1.3.6.1.4.1.562.2.4.1.135.9.10.1.1
This attribute indicates the number of TdmaIwfBearerChannel components provisioned for the TdmaIwfLogicalProcessor represented by this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..124  

tdmaCsLpActiveCalls 1.3.6.1.4.1.562.2.4.1.135.9.10.1.2
This attribute indicates the number of calls currently active on this LogicalProcessor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..124  

tdmaCsLpModemsSupported 1.3.6.1.4.1.562.2.4.1.135.9.10.1.3
This attribute indicates if modems are supported with this TdmaIwfLogicalProcessor. This attribute has one of the following values: yes: Modems are supported with this TdmaIwfLogicalProcessor. no: Modems are not supported with this TdmaIwfLogicalProcessor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

tdmaBc 1.3.6.1.4.1.562.2.4.1.136
OBJECT IDENTIFIER    

tdmaBcRowStatusTable 1.3.6.1.4.1.562.2.4.1.136.1
This entry controls the addition and deletion of tdmaBc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcRowStatusEntry

tdmaBcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.136.1.1
A single entry in the table represents a single tdmaBc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcRowStatusEntry  

tdmaBcRowStatus 1.3.6.1.4.1.562.2.4.1.136.1.1.1
This variable is used as the basis for SNMP naming of tdmaBc components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

tdmaBcComponentName 1.3.6.1.4.1.562.2.4.1.136.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaBcStorageType 1.3.6.1.4.1.562.2.4.1.136.1.1.4
This variable represents the storage type value for the tdmaBc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaBcCsIndex 1.3.6.1.4.1.562.2.4.1.136.1.1.10
This variable represents an index for the tdmaBc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..10  

tdmaBcBcIndex 1.3.6.1.4.1.562.2.4.1.136.1.1.11
This variable represents an index for the tdmaBc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

tdmaBcOperTable 1.3.6.1.4.1.562.2.4.1.136.101
This group contains operational attributes concerning the operation of this particular TdmaIwfBearerChannel for the current or most recent call.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcOperEntry

tdmaBcOperEntry 1.3.6.1.4.1.562.2.4.1.136.101.1
An entry in the tdmaBcOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcOperEntry  

tdmaBcState 1.3.6.1.4.1.562.2.4.1.136.101.1.1
This attribute indicates the current state of the MSC/IWF Interface Protocol (MIP) Message Router (MMR) for an IWF element. This attribute has one of the following values: idle: Startup state of IWF element. setup: This call half is being set up. active: This call half has been connected by both the MTX and IWF and is active. release: This call half is being released.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), setup(1), active(2), release(3)  

tdmaBcCallType 1.3.6.1.4.1.562.2.4.1.136.101.1.2
This attribute indicates the current call type. This attribute has one of the following values: analogSpeech: Analog speech calls. digitalSpeech: Digital speech calls. analogPrefSpeech: Analog preferred speech calls. digitalPrefSpeech: Digital preferred speech calls. asyncData: Asynchronous data service calls. g3Fax: Group 3 fax calls. rejected: Rejected calls. stuIII: STU III calls. notUsedYet: Bearer Channel has not been used in a call yet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER analogSpeech(0), digitalSpeech(1), analogPrefSpeech(2), digitalPrefSpeech(3), asyncData(4), g3Fax(5), rejected(6), stuIII(7), notUsedYet(8)  

tdmaBcLastResponseCode 1.3.6.1.4.1.562.2.4.1.136.101.1.3
This attribute indicates the MSC/IWF Interface Protocol (MIP) Message Router (MMR) response code returned for the last call which was active on this particular TdmaIwfBearerChannel. This attribute has one of the following values: noCause: No cause available. unassignedNumber: Unallocated or unassigned number. noRouteToDest: No route to destination. normalClearing: The call was terminated normally. userBusy: User busy. noResponse: No carrier. userNoAnswer: No answer from user. invalidNumberFormat: Translation or routing problem. unspecNormal: Normal, unspecified. temporaryFailure: Temporary failure. channelUnavailable: Channel unavailable. resourceUnavailable: Resources unavailable to handle call. qosUnavailabled: Specified rate of call unavailable. serviceUnavailable: Service not implemented. unimplementedOption: Option not implemented. invalidCallRefValue: Invalid call reference value. invalidChannel: Identified channel does not exist. unspecInvalidMessage: Invalid message, unspecified. missingMandatoryIe: Missing mandatory information element. invalidMessageType: Message type not implemented. incompatibleMessage: Message not compatible with call state. timerRecovery: Recovery on timer expiration. protocolError: Protocol error, unspecified.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noCause(0), unassignedNumber(129), noRouteToDest(131), normalClearing(144), userBusy(145), noResponse(146), userNoAnswer(147), invalidNumberFormat(156), unspecNormal(159), temporaryFailure(169), channelUnavailable(172), resourceUnavailable(175), qosUnavailable(177), serviceUnavailable(191), unimplementedOption(207), invalidCallRefValue(209), invalidChannel(210), unspecInvalidMessage(223), missingMandatoryIe(224), invalidMessageType(225), incompatibleMessage(226), timerRecovery(230), unspecProtocolError(239)  

tdmaBcMateBearerChannel 1.3.6.1.4.1.562.2.4.1.136.101.1.4
This attribute contains the name of the mate TdmaIwfBearerChannel that this TdmaIwfBearerChannel is involved with in the currently active call. In the case of a FastConnect call, this mate is a TdmaIwfFcBearerChannel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

tdmaBcCidDataTable 1.3.6.1.4.1.562.2.4.1.136.103
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcCidDataEntry

tdmaBcCidDataEntry 1.3.6.1.4.1.562.2.4.1.136.103.1
An entry in the tdmaBcCidDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcCidDataEntry  

tdmaBcCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.136.103.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

tdmaBcStateTable 1.3.6.1.4.1.562.2.4.1.136.104
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcStateEntry

tdmaBcStateEntry 1.3.6.1.4.1.562.2.4.1.136.104.1
An entry in the tdmaBcStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcStateEntry  

tdmaBcAdminState 1.3.6.1.4.1.562.2.4.1.136.104.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

tdmaBcOperationalState 1.3.6.1.4.1.562.2.4.1.136.104.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

tdmaBcUsageState 1.3.6.1.4.1.562.2.4.1.136.104.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

tdmaBcFramer 1.3.6.1.4.1.562.2.4.1.136.2
OBJECT IDENTIFIER    

tdmaBcFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.136.2.1
This entry controls the addition and deletion of tdmaBcFramer components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcFramerRowStatusEntry

tdmaBcFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.136.2.1.1
A single entry in the table represents a single tdmaBcFramer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcFramerRowStatusEntry  

tdmaBcFramerRowStatus 1.3.6.1.4.1.562.2.4.1.136.2.1.1.1
This variable is used as the basis for SNMP naming of tdmaBcFramer components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaBcFramerComponentName 1.3.6.1.4.1.562.2.4.1.136.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaBcFramerStorageType 1.3.6.1.4.1.562.2.4.1.136.2.1.1.4
This variable represents the storage type value for the tdmaBcFramer tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaBcFramerIndex 1.3.6.1.4.1.562.2.4.1.136.2.1.1.10
This variable represents the index for the tdmaBcFramer tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaBcFramerProvTable 1.3.6.1.4.1.562.2.4.1.136.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcFramerProvEntry

tdmaBcFramerProvEntry 1.3.6.1.4.1.562.2.4.1.136.2.10.1
An entry in the tdmaBcFramerProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcFramerProvEntry  

tdmaBcFramerInterfaceName 1.3.6.1.4.1.562.2.4.1.136.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

tdmaBcFramerStatsTable 1.3.6.1.4.1.562.2.4.1.136.2.11
This group contains the operational statistics data for a TdmaIwfFramer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcFramerStatsEntry

tdmaBcFramerStatsEntry 1.3.6.1.4.1.562.2.4.1.136.2.11.1
An entry in the tdmaBcFramerStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcFramerStatsEntry  

tdmaBcFramerTxFrames 1.3.6.1.4.1.562.2.4.1.136.2.11.1.1
This attribute counts the number of frames transmitted to the link interface by TdmaIwfFramer. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcFramerRxFrames 1.3.6.1.4.1.562.2.4.1.136.2.11.1.2
This attribute counts the number of frames received from the link interface by TdmaIwfFramer. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcFramerRxBytes 1.3.6.1.4.1.562.2.4.1.136.2.11.1.3
This attribute counts the number of bytes received from the link interface by TdmaIwfFramer. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcFramerLinkTable 1.3.6.1.4.1.562.2.4.1.136.2.12
This group contains provisionable attributes for the TdmaIwfFramer which controls link layer framing for application components sending and receiving data on a link interface for this particular TdmaIwfBearerChannel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcFramerLinkEntry

tdmaBcFramerLinkEntry 1.3.6.1.4.1.562.2.4.1.136.2.12.1
An entry in the tdmaBcFramerLinkTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcFramerLinkEntry  

tdmaBcFramerFramingType 1.3.6.1.4.1.562.2.4.1.136.2.12.1.1
This attribute indicates the type of framing for the link layer data received and transmitted on this channel. This attribute has one of the following values: btdsFraming: Bit transparent framing for the TdmaIwfBearerChannel components on MVP cards. mtxFraming: DMS-MTX InterSystem Link Protocol (ISLP) framing required for the TdmaIwfBearerChannel components on DS1C/E1C cards.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER btdsFraming(2), mtxFraming(8)  

tdmaBcFramerStateTable 1.3.6.1.4.1.562.2.4.1.136.2.13
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcFramerStateEntry

tdmaBcFramerStateEntry 1.3.6.1.4.1.562.2.4.1.136.2.13.1
An entry in the tdmaBcFramerStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcFramerStateEntry  

tdmaBcFramerAdminState 1.3.6.1.4.1.562.2.4.1.136.2.13.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

tdmaBcFramerOperationalState 1.3.6.1.4.1.562.2.4.1.136.2.13.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

tdmaBcFramerUsageState 1.3.6.1.4.1.562.2.4.1.136.2.13.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

tdmaBcModem 1.3.6.1.4.1.562.2.4.1.136.3
OBJECT IDENTIFIER    

tdmaBcModemRowStatusTable 1.3.6.1.4.1.562.2.4.1.136.3.1
This entry controls the addition and deletion of tdmaBcModem components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcModemRowStatusEntry

tdmaBcModemRowStatusEntry 1.3.6.1.4.1.562.2.4.1.136.3.1.1
A single entry in the table represents a single tdmaBcModem component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcModemRowStatusEntry  

tdmaBcModemRowStatus 1.3.6.1.4.1.562.2.4.1.136.3.1.1.1
This variable is used as the basis for SNMP naming of tdmaBcModem components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaBcModemComponentName 1.3.6.1.4.1.562.2.4.1.136.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaBcModemStorageType 1.3.6.1.4.1.562.2.4.1.136.3.1.1.4
This variable represents the storage type value for the tdmaBcModem tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaBcModemIndex 1.3.6.1.4.1.562.2.4.1.136.3.1.1.10
This variable represents the index for the tdmaBcModem tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaBcModemOperTable 1.3.6.1.4.1.562.2.4.1.136.3.10
This group contains operational attributes that measure performance of the modem component for this particular TdmaIwfBearerChannel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcModemOperEntry

tdmaBcModemOperEntry 1.3.6.1.4.1.562.2.4.1.136.3.10.1
An entry in the tdmaBcModemOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcModemOperEntry  

tdmaBcModemVoiceLaw 1.3.6.1.4.1.562.2.4.1.136.3.10.1.1
This attribute indicates the active voice law associated with the modem component. This attribute has one of the following values: aLaw and muLaw. Both protocols are utilized for encoding voice- band audio. For additional information on each, refer to ITU-T G.711 'Pulse Code Modulation (PCM) of Voice Frequencies'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER aLaw(0), muLaw(1)  

tdmaBcModemRate 1.3.6.1.4.1.562.2.4.1.136.3.10.1.2
This attribute indicates the transmission rate of the current modem in use. All rates are the same in both the transmit and receive directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER n50(0), n300(1), n600(2), n1200(3), n2400(4), n4800(5), n7200(6), n9600(7), n12000(8), n14400(9), n16800(10), n19200(11), n21600(12), n24000(13), n26400(14), n28800(15), n31200(16), n32000(17), n33600(18), n38400(19), n43200(20), n48000(21), n56000(22), n57600(23), n64000(24)  

tdmaBcModemModemAlgorithmInUse 1.3.6.1.4.1.562.2.4.1.136.3.10.1.3
This attribute indicates the current modem algorithm(s) active for the channel. This attribute has one of the following values: t30: T.30 is active. T.30 is the Group 3 fax protocol. v17: V.17 is active.V.17 is an ITU-T 14400bit/s modem standard. v21: V.21 is active. V.21 is an ITU-4 300bit/s modem standard. v22: V.22 ia active. V.22 is an ITU-T modem standard that operates at 1200bit/s and 600 baud. v22bis: V.22bis is active. V.22bis is an ITU-T modem standard that operates at 2400bit/s and 600 baud. v27ter: V.27ter is active. V.27ter is an ITU-T 7200bit/s modem standard. v29: V.29 is active. V.29 is an ITU-T 9600bit/s modem standard. v32: V.32 is active. V.32 is an ITU-T modem standard that operates at 9600bit/s and 2400 baud. v32bis: V.32bis is an ITU-T modem standard that operates at a speed of 14.4kbit/s. Description of bits: t30(0) v17(1) v21(2) v22(3) v22bis(4) v27ter(5) v29(6) v32(7) v32bis(8)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

tdmaBcModemProtocolState 1.3.6.1.4.1.562.2.4.1.136.3.10.1.4
This attribute indicates the active protocol state of the modem in use.This attribute has one of the following values: idle: Modem is in an inactive state and has no current connection established. training: Modem is attempting to establish a connection with the far end modem via handshaking. connected: Modem has establish a connection with the far end modem. releasing: Modem has begun tearing down the connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), training(1), connected(2), releasing(3)  

tdmaBcModemMobileSideFlowControlState 1.3.6.1.4.1.562.2.4.1.136.3.10.1.5
This attribute indicates the state of flow control based on whether flow control was requested by the mobile side of the connection and an indication was sent to an upper layer protocol. This attribute has one of the following values: on: Flow control is active towards the mobile side of the call. off: Flow control is not active towards the mobile side of the call. DESCRIPTION
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(0), off(1)  

tdmaBcModemPstnSideFlowControlState 1.3.6.1.4.1.562.2.4.1.136.3.10.1.6
This attribute indicates the state of flow control based on whether flow control was requested by the PSTN side of the connection and an indication was sent to the Digital Signal Processor. This attribute has one of the following values: on: Flow control is active towards the DSP (PSTN side of the call). off: Flow control is not active towards the DSP (PSTN side of the call).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(0), off(1)  

tdmaBcModemAsyncMode 1.3.6.1.4.1.562.2.4.1.136.3.10.1.7
This attribute indicates whether conversion between synchronous and asynchronous data format (specifically, the stripping or insertion of start and stop bits) is being performed. The value is on unless the V.42 layer is active or it is a fax call. This attribute has one of the following values: on: Conversion between synchronous and asynchronous data is being performed. off: Conversion between synchronous and asynchronous data is not being performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(0), off(1)  

tdmaBcModemOutbandFlowControl 1.3.6.1.4.1.562.2.4.1.136.3.10.1.8
This attribute indicates whether outband flow control conversions are being performed. If outband flow control is on, then when the Modem Application Layer (MAL) receives an xon or xoff from the PSTN, the MAL converts the instruction into a primitive and sends it to the Data Service Control (DSC). In the opposite direction with outband flow control on, when the MAL receives a primitive from the DSC, the MAL converts the primitive into an xon or xoff and forwards it to the PSTN. If outband flow control is off, then all flow control is handled inband. The modem performs either inband or outband flow control unless V.42 layer is active, it is a fax call, or no flow control was specified by the DMS-MTX. This attribute has one of the following values: on: Conversion to and from out-of-band signaling is enabled. off: Conversion to and from out-of-band signaling is disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(0), off(1)  

tdmaBcModemOutbandBreak 1.3.6.1.4.1.562.2.4.1.136.3.10.1.9
This attribute indicates whether inband or outband break control conversions are being performed. If outband break control is on, when the modem detects a break condition coming from the PSTN, the Modem Application Layer (MAL) converts the instruction into a primitive and forwards it to the Data Service Control (DSC). In the opposite direction with outband break control on, when the MAL receives a primitive from the DSC, the MAL converts the primitive into a break and forwards it to the PSTN. When a break condition is discovered all subsequent incoming data is discarded until a start bit is received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(0), off(1)  

tdmaBcModemAutobaud 1.3.6.1.4.1.562.2.4.1.136.3.10.1.10
This attribute indicates whether autobaud is active. The modem is instructed at call setup time by the DMS-MTX on the following: (1) the initial modem data rate value, and (2) whether a modem is allowed to perform autobauding (on) or not (off). With autobauding on, the modem is allowed to connect using a valid modem data rate less than or equal to the initial rate specified to the modem by the DMS-MTX. If a modem cannot perform autobauding and the carrier cannot be established at the initial data rate, the modem is disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(0), off(1)  

tdmaBcModemStatsTable 1.3.6.1.4.1.562.2.4.1.136.3.11
This group contains operational attributes that measure performance of the modem component for this particular TdmaIwfBearerChannel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcModemStatsEntry

tdmaBcModemStatsEntry 1.3.6.1.4.1.562.2.4.1.136.3.11.1
An entry in the tdmaBcModemStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcModemStatsEntry  

tdmaBcModemTxBytes 1.3.6.1.4.1.562.2.4.1.136.3.11.1.1
This attribute counts the number of payload bytes transmitted. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcModemRxBytes 1.3.6.1.4.1.562.2.4.1.136.3.11.1.2
This attribute counts the number of payload bytes received. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcModemFramingErrors 1.3.6.1.4.1.562.2.4.1.136.3.11.1.3
This attribute counts the number of framing errors detected by the hardware. This is the absence of a stop bit after a start bit and eight bits of data. All incoming data is discarded until the next start bit is received. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcFax 1.3.6.1.4.1.562.2.4.1.136.4
OBJECT IDENTIFIER    

tdmaBcFaxRowStatusTable 1.3.6.1.4.1.562.2.4.1.136.4.1
This entry controls the addition and deletion of tdmaBcFax components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcFaxRowStatusEntry

tdmaBcFaxRowStatusEntry 1.3.6.1.4.1.562.2.4.1.136.4.1.1
A single entry in the table represents a single tdmaBcFax component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcFaxRowStatusEntry  

tdmaBcFaxRowStatus 1.3.6.1.4.1.562.2.4.1.136.4.1.1.1
This variable is used as the basis for SNMP naming of tdmaBcFax components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaBcFaxComponentName 1.3.6.1.4.1.562.2.4.1.136.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaBcFaxStorageType 1.3.6.1.4.1.562.2.4.1.136.4.1.1.4
This variable represents the storage type value for the tdmaBcFax tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaBcFaxIndex 1.3.6.1.4.1.562.2.4.1.136.4.1.1.10
This variable represents the index for the tdmaBcFax tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaBcFaxOperTable 1.3.6.1.4.1.562.2.4.1.136.4.10
This group contains operational attributes which measure the performance of the fax protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcFaxOperEntry

tdmaBcFaxOperEntry 1.3.6.1.4.1.562.2.4.1.136.4.10.1
An entry in the tdmaBcFaxOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcFaxOperEntry  

tdmaBcFaxActiveMode 1.3.6.1.4.1.562.2.4.1.136.4.10.1.1
This attribute indicates the mode of the fax T.30 protocol, determined during Exchange Identification (XID) negotiations. The following modes are supported: normal: Normal T.30 protocol, Error Correction Mode (ECM) not used. ecm: Error Correction Mode used. Fax error correction is done using a half-duplex page selective repeat technique.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), ecm(1)  

tdmaBcFaxProtocolState 1.3.6.1.4.1.562.2.4.1.136.4.10.1.2
This attribute indicates the protocol state of the fax adaptor. This attribute has one of the following values: setup: Call setup state. idle: Idle state only transmitting Synchronize (SYNC) frames. bcsRx: Receiving Binary Coded Signal (BCS) packet from modem. bcsTx: Transmitting BCS packet to modem. msgRx: Receiving fax message from modem. msgTx: Transmitting fax message to modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER setup(0), idle(1), bcsRx(2), bcsTx(3), msgRx(4), msgTx(5)  

tdmaBcFaxMessageRate 1.3.6.1.4.1.562.2.4.1.136.4.10.1.3
This attribute indicates the fax message rate used for sending fax documents.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65000  

tdmaBcFaxStatsTable 1.3.6.1.4.1.562.2.4.1.136.4.11
This group contains statistical attributes which measure the performance of the fax protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcFaxStatsEntry

tdmaBcFaxStatsEntry 1.3.6.1.4.1.562.2.4.1.136.4.11.1
An entry in the tdmaBcFaxStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcFaxStatsEntry  

tdmaBcFaxTxPagesToMobile 1.3.6.1.4.1.562.2.4.1.136.4.11.1.1
The attribute counts the number of fax pages transmitted to the mobile. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcFaxRxPagesFromMobile 1.3.6.1.4.1.562.2.4.1.136.4.11.1.2
This attribute counts the number of fax pages received from the mobile. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcDce 1.3.6.1.4.1.562.2.4.1.136.5
OBJECT IDENTIFIER    

tdmaBcDceRowStatusTable 1.3.6.1.4.1.562.2.4.1.136.5.1
This entry controls the addition and deletion of tdmaBcDce components.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcDceRowStatusEntry

tdmaBcDceRowStatusEntry 1.3.6.1.4.1.562.2.4.1.136.5.1.1
A single entry in the table represents a single tdmaBcDce component.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  TdmaBcDceRowStatusEntry  

tdmaBcDceRowStatus 1.3.6.1.4.1.562.2.4.1.136.5.1.1.1
This variable is used as the basis for SNMP naming of tdmaBcDce components. These components cannot be added nor deleted.
Status: obsolete Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaBcDceComponentName 1.3.6.1.4.1.562.2.4.1.136.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaBcDceStorageType 1.3.6.1.4.1.562.2.4.1.136.5.1.1.4
This variable represents the storage type value for the tdmaBcDce tables.
Status: obsolete Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaBcDceIndex 1.3.6.1.4.1.562.2.4.1.136.5.1.1.10
This variable represents the index for the tdmaBcDce tables.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaBcDsc 1.3.6.1.4.1.562.2.4.1.136.6
OBJECT IDENTIFIER    

tdmaBcDscRowStatusTable 1.3.6.1.4.1.562.2.4.1.136.6.1
This entry controls the addition and deletion of tdmaBcDsc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcDscRowStatusEntry

tdmaBcDscRowStatusEntry 1.3.6.1.4.1.562.2.4.1.136.6.1.1
A single entry in the table represents a single tdmaBcDsc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcDscRowStatusEntry  

tdmaBcDscRowStatus 1.3.6.1.4.1.562.2.4.1.136.6.1.1.1
This variable is used as the basis for SNMP naming of tdmaBcDsc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaBcDscComponentName 1.3.6.1.4.1.562.2.4.1.136.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaBcDscStorageType 1.3.6.1.4.1.562.2.4.1.136.6.1.1.4
This variable represents the storage type value for the tdmaBcDsc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaBcDscIndex 1.3.6.1.4.1.562.2.4.1.136.6.1.1.10
This variable represents the index for the tdmaBcDsc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaBcDscOperTable 1.3.6.1.4.1.562.2.4.1.136.6.10
This group contains operational attributes that measure the performance of the DSC asynchronous data service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcDscOperEntry

tdmaBcDscOperEntry 1.3.6.1.4.1.562.2.4.1.136.6.10.1
An entry in the tdmaBcDscOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcDscOperEntry  

tdmaBcDscP0CompressionDirection 1.3.6.1.4.1.562.2.4.1.136.6.10.1.1
This attribute indicates the direction of compression requested from logical link 0 (LL0). This attribute has one of the following values: noCpmpression: No data compression. compInitrResp: Compression initiator to responder. compRespInitr: compression responder to initiator. compBoth: compression in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noCompression(0), compInitrResp(1), compRespInitr(2), compBoth(3)  

tdmaBcDscP1CompressionMaximumCodewords 1.3.6.1.4.1.562.2.4.1.136.6.10.1.2
This attribute indicates the maximum number of codewords to be requested from logical link 0 (LL0) for compression. A codeword is a binary number that represents a string of characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 512..65535  

tdmaBcDscP2CompressionMaximumCharacters 1.3.6.1.4.1.562.2.4.1.136.6.10.1.3
This attribute indicates the maximum number of characters that can be represented by a single codeword to be requested from logical link 0 (LL0) for compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 6..250  

tdmaBcDscStatsTable 1.3.6.1.4.1.562.2.4.1.136.6.11
This group contains statistical attributes that measure the performance of the DSC asynchronous data service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcDscStatsEntry

tdmaBcDscStatsEntry 1.3.6.1.4.1.562.2.4.1.136.6.11.1
An entry in the tdmaBcDscStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcDscStatsEntry  

tdmaBcDscTxBytes 1.3.6.1.4.1.562.2.4.1.136.6.11.1.1
This attribute counts the number of data bytes relayed by DSC in the transmit direction (towards the mobile). The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcDscRxBytes 1.3.6.1.4.1.562.2.4.1.136.6.11.1.2
This attribute counts the number of data bytes relayed by DSC in the receive direction (from the mobile). The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcRlp1 1.3.6.1.4.1.562.2.4.1.136.7
OBJECT IDENTIFIER    

tdmaBcRlp1RowStatusTable 1.3.6.1.4.1.562.2.4.1.136.7.1
This entry controls the addition and deletion of tdmaBcRlp1 components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcRlp1RowStatusEntry

tdmaBcRlp1RowStatusEntry 1.3.6.1.4.1.562.2.4.1.136.7.1.1
A single entry in the table represents a single tdmaBcRlp1 component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcRlp1RowStatusEntry  

tdmaBcRlp1RowStatus 1.3.6.1.4.1.562.2.4.1.136.7.1.1.1
This variable is used as the basis for SNMP naming of tdmaBcRlp1 components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaBcRlp1ComponentName 1.3.6.1.4.1.562.2.4.1.136.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaBcRlp1StorageType 1.3.6.1.4.1.562.2.4.1.136.7.1.1.4
This variable represents the storage type value for the tdmaBcRlp1 tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaBcRlp1Index 1.3.6.1.4.1.562.2.4.1.136.7.1.1.10
This variable represents the index for the tdmaBcRlp1 tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaBcRlp1OperTable 1.3.6.1.4.1.562.2.4.1.136.7.10
This group contains operational attributes that measure performance of the TdmaIwfBearerChannel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcRlp1OperEntry

tdmaBcRlp1OperEntry 1.3.6.1.4.1.562.2.4.1.136.7.10.1
An entry in the tdmaBcRlp1OperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcRlp1OperEntry  

tdmaBcRlp1Layer3L0ReqWinSize 1.3.6.1.4.1.562.2.4.1.136.7.10.1.1
This attribute indicates the window size for Service Access Point (SAP) 0 requested by layer 3. The window size is the maximum number of sequentially numbered Information (I) frames that may be unacknowledged at any given time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..64  

tdmaBcRlp1Layer3L1ReqWinSize1 1.3.6.1.4.1.562.2.4.1.136.7.10.1.2
This attribute indicates the window size for Service Access Point (SAP) 1 requested by layer 3. The window size is the maximum number of sequentially numbered Information (I) frames that may be unacknowledged at any given time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..64  

tdmaBcRlp1T1ResponseTimer 1.3.6.1.4.1.562.2.4.1.136.7.10.1.3
This attribute indicates the current T1 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Information (XID). This attribute specifies the time the receiving RLP1 entity shall wait for a response from the peer TIA-136-310 (formerly IS-130) application. The value used for XID negotiations can be provisioned in the TdmaCs/* Rlp1 t1ResponseTimer attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 5..20  

tdmaBcRlp1T2LinkActivityTimer 1.3.6.1.4.1.562.2.4.1.136.7.10.1.4
This attribute indicates the current T2 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Information (XID). This attribute specifies the maximum time the receiving RLP1 entity shall wait for link activity. The value used for XID negotiations can be provisioned in the TdmaCs/* Rlp1 t2LinkActivityTimer attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 10..120  

tdmaBcRlp1T3PeerAckTimer 1.3.6.1.4.1.562.2.4.1.136.7.10.1.5
This attribute indicates the current T3 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Information (XID). The attribute specifies the maximum time the receiving RLP1 entity shall wait for the peer to ACK or NAK data. The value used for XID negotiations can be provisioned in the TdmaCs/* Rlp1 t3PeerAckTimer attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 5..20  

tdmaBcRlp1StatsTable 1.3.6.1.4.1.562.2.4.1.136.7.11
This group contains operational attributes that measure performance of the TdmaIwfBearerChannel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcRlp1StatsEntry

tdmaBcRlp1StatsEntry 1.3.6.1.4.1.562.2.4.1.136.7.11.1
An entry in the tdmaBcRlp1StatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcRlp1StatsEntry  

tdmaBcRlp1TxFrames 1.3.6.1.4.1.562.2.4.1.136.7.11.1.1
This attribute counts the number of valid frames transmitted to the mobile. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcRlp1RxFrames 1.3.6.1.4.1.562.2.4.1.136.7.11.1.2
This attributes counts the number of valid frames received from the mobile. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcRlp1BadRxFrames 1.3.6.1.4.1.562.2.4.1.136.7.11.1.3
This attribute count the total number of bad RLP1 frames received from the mobile. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42 1.3.6.1.4.1.562.2.4.1.136.8
OBJECT IDENTIFIER    

tdmaBcV42RowStatusTable 1.3.6.1.4.1.562.2.4.1.136.8.1
This entry controls the addition and deletion of tdmaBcV42 components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcV42RowStatusEntry

tdmaBcV42RowStatusEntry 1.3.6.1.4.1.562.2.4.1.136.8.1.1
A single entry in the table represents a single tdmaBcV42 component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcV42RowStatusEntry  

tdmaBcV42RowStatus 1.3.6.1.4.1.562.2.4.1.136.8.1.1.1
This variable is used as the basis for SNMP naming of tdmaBcV42 components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaBcV42ComponentName 1.3.6.1.4.1.562.2.4.1.136.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaBcV42StorageType 1.3.6.1.4.1.562.2.4.1.136.8.1.1.4
This variable represents the storage type value for the tdmaBcV42 tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaBcV42Index 1.3.6.1.4.1.562.2.4.1.136.8.1.1.10
This variable represents the index for the tdmaBcV42 tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaBcV42OperTable 1.3.6.1.4.1.562.2.4.1.136.8.10
This group contains operational attributes which measure V.42 error detection and correction performance.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcV42OperEntry

tdmaBcV42OperEntry 1.3.6.1.4.1.562.2.4.1.136.8.10.1
An entry in the tdmaBcV42OperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcV42OperEntry  

tdmaBcV42ProtocolState 1.3.6.1.4.1.562.2.4.1.136.8.10.1.1
This attribute indicates the state of V.42. Valid states are: notActive: The V.42 link connection with the PSTN modem is not established. None of the V.42 functions including the error detection, error correction, and flow control is provided to the data call. This is the initial state of V.42. disconnected: This means that the V42 link is disconnected. linkSetup: The V.42 operation enters this state from the disconnected state after the V.42 sends to the PSTN modem a Set Asynchronous Balanced Mode Extended (SABME) frame in an attempt to establish the error control connection with the PSTN modem. frameReject: The V.42 operation enters into this state after it identifies an invalid frame sent by the peer and it sends back a frame reject (FRMR) frame to the peer. disconnectRequest: The V.42 operation enters into this state after it sends to the peer a disconnect (DISC) frame with the attempt to disconnect the V.42 error control link. informationTransfer: The V.42 enters into this state after it receives a UA (unnumbered acknowledgment) frame which the peer sent upon receipt of the SAMBE frame from IWF V.42. Once in this state, the V.42 can exchange data and supervisory information with its peer. waitingAck: The V.42 enters this state after it sends polling enquiry to its peer. The V.42 sends the polling enquiry when it receives a reject frame (REJ) from its peer or either its acknowledgment timer or inactivity timer timed out on the information frames sent out.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notActive(0), disconnected(1), linkSetup(2), frameReject(3), disconnectRequest(4), informationTransfer(5), waitingAck(6)  

tdmaBcV42TxN401FrameSize 1.3.6.1.4.1.562.2.4.1.136.8.10.1.2
This attribute indicates the current value of parameter N401 for V.42 which is negotiated during Exchange Information (XID). This is the maximum number of octets that can be carried in the information field of an information frame that the IWF V.42 transmits to the PSTN modem. The IWF V.42 puts this or even smaller size of data into the outgoing information frame. The value used for XID negotiations can be provisioned via TdmaCs/* V42.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65355  

tdmaBcV42RxN401FrameSize 1.3.6.1.4.1.562.2.4.1.136.8.10.1.3
This attribute indicates the current value of N401, that is negotiated during Exchange Identification (XID). This is the maximum number of octets that can be carried in the information field of an information frame received from the PSTN modem. An incoming information frame carrying data octets more than this size shall be rejected by the IWF V.42. The value used for XID negotiations can be provisioned via TdmaCs/* V42.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

tdmaBcV42TxKWindowSize 1.3.6.1.4.1.562.2.4.1.136.8.10.1.4
This attribute indicates the current value of k, that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used for the information frames that the V.42 transmits to the PSTN modem. This size governs the maximum number of information frames that the IWF V.42 error- correcting entity can have outstanding (that is, unacknowledged). The value used for XID negotiations can be provisioned via TdmaCs/* V42.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..127  

tdmaBcV42RxKWindowSize 1.3.6.1.4.1.562.2.4.1.136.8.10.1.5
This attribute indicates the current value of k that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used for information frames transmitted from the PSTN modem. This size governs the maximum number of information frames that the peer of the IWF V.42 error-correcting entity can have outstanding (that is, unacknowledged). The value used for XID negotiations can be provisioned via TdmaCs/* V42.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..127  

tdmaBcV42V42ActiveInCall 1.3.6.1.4.1.562.2.4.1.136.8.10.1.6
This attribute indicates whether V42 is really being used in this data call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notActiveInCall(0), activeInCall(1)  

tdmaBcV42V42BisActiveInCall 1.3.6.1.4.1.562.2.4.1.136.8.10.1.7
This attribute indicates whether V42bis is really being used in this data call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notActiveInCall(0), activeInCall(1)  

tdmaBcV42StatsTable 1.3.6.1.4.1.562.2.4.1.136.8.11
This group contains statistical attributes that measure the V.42 error detection and correction performance.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcV42StatsEntry

tdmaBcV42StatsEntry 1.3.6.1.4.1.562.2.4.1.136.8.11.1
An entry in the tdmaBcV42StatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcV42StatsEntry  

tdmaBcV42RxIBytes 1.3.6.1.4.1.562.2.4.1.136.8.11.1.1
This attribute counts the total number of bytes that the V.42 actually received from the PSTN modem in a data call. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42TxIBytes 1.3.6.1.4.1.562.2.4.1.136.8.11.1.2
This attribute counts the total number of bytes that the V.42 transmitted to the PSTN modem in a data call. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42RxIFrames 1.3.6.1.4.1.562.2.4.1.136.8.11.1.3
This attribute counts the total number of Information (I) frames that the V.42 received from the PSTN modem in a data call. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42TxIFrames 1.3.6.1.4.1.562.2.4.1.136.8.11.1.4
This attribute counts the total number of information frames that the V.42 transmitted to the PSTN modem in a data call. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42RetransmittedFrames 1.3.6.1.4.1.562.2.4.1.136.8.11.1.5
This attribute counts the total number of frames retransmitted by the IWF V.42 entity in a data call. The V.42 retransmits the same frame when the associated T401 acknowledgment timer timeouts or when a Reject (REJ) supervisory frame has been received from the PSTN modem. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42T1AckTimeouts 1.3.6.1.4.1.562.2.4.1.136.8.11.1.6
This attribute counts the total number of times that the T401 timer has timed out within a data call. If this timer times-out frequently, the operator may need to adjust the provisioned parameter T401 acknowledgment timer to a larger time amount, since every time that V.42 sends out a frame it sets the T401 timer to wait for the peer's acknowledgment of the frame. When the timer times-out and no acknowledgment has been received, the V.42 sends the same frame to its peer. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42RemoteBusyIndications 1.3.6.1.4.1.562.2.4.1.136.8.11.1.7
This attribute counts the total number of times the PSTN modem enters a busy state (the IWF has received a Receive Not Ready message) and asks the IWF V.42 not to send Information (I) frames to it until it is ready to receive information frames again (indicated by receipt of a Receive Ready message or a data message). The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42LocalBusyIndications 1.3.6.1.4.1.562.2.4.1.136.8.11.1.8
This attribute counts the total number of times the IWF V.42 enters in a busy condition and asks the peer to stop sending information frames until it has cleared up from the busy condition. The V.42 enters busy condition when its data buffer is about to be overflowed by the incoming Information (I) frames. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42BadFramesRx 1.3.6.1.4.1.562.2.4.1.136.8.11.1.9
This attribute counts the total number of bad frames the IWF V.42 has received from the PSTN remote modem within the data call. In this instance, 'bad frames' refer to the V.42 protocol error frames other than the check sequence error frames. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42CrcErrorsRx 1.3.6.1.4.1.562.2.4.1.136.8.11.1.10
This attribute counts the total number of frames received from the remote PSTN modem that contain incorrect frame check sequence. A high value signifies the condition of the physical medium is poor. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42Bis 1.3.6.1.4.1.562.2.4.1.136.9
OBJECT IDENTIFIER    

tdmaBcV42BisRowStatusTable 1.3.6.1.4.1.562.2.4.1.136.9.1
This entry controls the addition and deletion of tdmaBcV42Bis components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcV42BisRowStatusEntry

tdmaBcV42BisRowStatusEntry 1.3.6.1.4.1.562.2.4.1.136.9.1.1
A single entry in the table represents a single tdmaBcV42Bis component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcV42BisRowStatusEntry  

tdmaBcV42BisRowStatus 1.3.6.1.4.1.562.2.4.1.136.9.1.1.1
This variable is used as the basis for SNMP naming of tdmaBcV42Bis components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaBcV42BisComponentName 1.3.6.1.4.1.562.2.4.1.136.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaBcV42BisStorageType 1.3.6.1.4.1.562.2.4.1.136.9.1.1.4
This variable represents the storage type value for the tdmaBcV42Bis tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaBcV42BisIndex 1.3.6.1.4.1.562.2.4.1.136.9.1.1.10
This variable represents the index for the tdmaBcV42Bis tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaBcV42BisOperTable 1.3.6.1.4.1.562.2.4.1.136.9.10
This group contains operational attributes that measure the performance of IwfV42bis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcV42BisOperEntry

tdmaBcV42BisOperEntry 1.3.6.1.4.1.562.2.4.1.136.9.10.1
An entry in the tdmaBcV42BisOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcV42BisOperEntry  

tdmaBcV42BisProtocolModeEncoder 1.3.6.1.4.1.562.2.4.1.136.9.10.1.1
This attribute indicates the current mode of the IwfV42bis encoder. This mode can be either: transparent: A mode of operation in which compression has been selected but data is being transmitted in uncompressed form. Transparent mode command sequences may be inserted into the data stream. compressed: A mode of operation in which data is transmitted in codewords. The encoder switches between the two modes depending on whether the data coming from the Date Terminal Equipment (DTE) is suitable for compression. The data compression function periodically determines the compressibility of the data based on a comparison of the number of bits required to represent a segment of the data stream before and after compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER transparent(0), compressed(1)  

tdmaBcV42BisProtocolModeDecoder 1.3.6.1.4.1.562.2.4.1.136.9.10.1.2
This attribute indicates the current mode of the V.42bis decoder. This mode can be either: transparent: A mode of operation in which compression has been selected but data is being transmitted in uncompressed form. Transparent mode command sequences may be inserted into the data stream. compressed: A mode of operation in which data is transmitted in codewords. The encoder (at the mobile or PSTN) switches between the two modes depending on whether the data coming from the Date Terminal Equipment (DTE) is suitable for compression. The data compression function periodically determines the compressibility of the data based on a comparison of the number of bits required to represent a segment of the data stream before and after compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER transparent(0), compressed(1)  

tdmaBcV42BisP0CompressionDirection 1.3.6.1.4.1.562.2.4.1.136.9.10.1.3
This attribute indicates the direction in which V.42bis is active, negotiated at link setup by the data link protocol through Exchange Identification (XID) negotiation of parameter P0 (compression direction). The value used for XID negotiations can be provisioned via TdmaCs/* V42bis. This attribute has one of the following values: noCompression: No data compression. compInitrResp: The data sent by the IWF to the other entity is compressed. compRespInitr: The data received by the IWF from the other entity is compressed. compBoth: compression in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noCompression(0), compInitrResp(1), compRespInitr(2), compBoth(3)  

tdmaBcV42BisP1MaximumCodewords 1.3.6.1.4.1.562.2.4.1.136.9.10.1.4
This attribute indicates the maximum number of codewords in the dictionary negotiated at link setup by the data link protocol by way of the Exchange Identification (XID) negotiation of parameter P1 (number of codewords). The value used for XID negotiations can be provisioned via TdmaCs/* V42bis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

tdmaBcV42BisP2MaximumStringSize 1.3.6.1.4.1.562.2.4.1.136.9.10.1.5
This attribute indicates the maximum number of characters allowed in a string represented by a codeword negotiated at link setup by the data link protocol by way of the Exchange Identification (XID) negotiation of parameter P2 (maximum string size). The value used for XID negotiations can be provisioned via TdmaCs/* V42bis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 6..250  

tdmaBcV42BisLastDecodeError 1.3.6.1.4.1.562.2.4.1.136.9.10.1.6
This attribute indicates last error found by the decoder. This attribute has one of the following values: none: No errors found. badStepup: Receipt of STEPUP (step up codeword size) codeword when it would cause C2 (current code word size) to exceed N1 (maximum code word size). codewordEqC1: Receipt of a codeword, at any time, equal to C1 (next empty dictionary entry). emptyCodeword: Receipt of a codeword representing an empty dictionary entry. reservedCommand: Receipt of a reserved command code. generalError: Receipt of any other error. The action taken by V.42bis on detecting an error is provisioned via TdmaCs/* V42bis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), badStepup(1), codewordEqC1(2), emptyCodeword(3), rsvdCommand(4), generalError(5)  

tdmaBcV42BisCompRatioEncoder 1.3.6.1.4.1.562.2.4.1.136.9.10.1.7
This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being compressed. This is the compression ratio achieved by the V.42bis encoder running on the Passport. This attribute is relevant for both protocol modes transparent and compressed as the encoder switches between the two modes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FixedPoint2 0..30000  

tdmaBcV42BisCompRatioDecoder 1.3.6.1.4.1.562.2.4.1.136.9.10.1.8
This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being compressed. This is the compression ratio achieved by the V.42bis encoder at the mobile or PSTN. This attribute is relevant for both protocol modes transparent and compressed as the encoder switches between the two modes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FixedPoint2 0..30000  

tdmaBcV42BisStatsTable 1.3.6.1.4.1.562.2.4.1.136.9.11
This group contains statistical attributes that measure the performance of IwfV42bis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcV42BisStatsEntry

tdmaBcV42BisStatsEntry 1.3.6.1.4.1.562.2.4.1.136.9.11.1
An entry in the tdmaBcV42BisStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcV42BisStatsEntry  

tdmaBcV42BisModeChangesEncode 1.3.6.1.4.1.562.2.4.1.136.9.11.1.1
This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the encoder. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42BisModeChangesDecode 1.3.6.1.4.1.562.2.4.1.136.9.11.1.2
This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the decoder. The mode changes are determined by the encoder at the mobile or the PSTN. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42BisResetsEncode 1.3.6.1.4.1.562.2.4.1.136.9.11.1.3
This attribute counts the number of resets sent by the encoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42BisResetsDecode 1.3.6.1.4.1.562.2.4.1.136.9.11.1.4
This attribute counts the number of resets received by the decoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The resets of the decoder are determined by the encoder at the mobile or PSTN. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42BisReinitializations 1.3.6.1.4.1.562.2.4.1.136.9.11.1.5
This attribute counts the number of times V.42bis is reinitialized because of a destructive break (a destructive break is a break that causes data to be discarded) occurring on the error-corrected connection initiated by either the mobile or PSTN. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcV42BisErrorsInDecode 1.3.6.1.4.1.562.2.4.1.136.9.11.1.6
This attribute counts the number of errors found by the decoder. The errors could be any of the following: 1.Receipt of STEPUP (step up codeword size) codeword when it would cause C2 (current code word size) to exceed N1 (maximum code word size). 2. Receipt of a codeword, at any time, equal to C1 (next empty dictionary entry). 3. Receipt of a codeword representing an empty dictionary entry. 4. Receipt of a reserved command code. 5. Receipt of any other error. The counter wraps when it exceeds the maximum value. The action taken by V.42bis on detecting any of these errors is provisioned via TdmaCs/* V42bis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcUr 1.3.6.1.4.1.562.2.4.1.136.10
OBJECT IDENTIFIER    

tdmaBcUrRowStatusTable 1.3.6.1.4.1.562.2.4.1.136.10.1
This entry controls the addition and deletion of tdmaBcUr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcUrRowStatusEntry

tdmaBcUrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.136.10.1.1
A single entry in the table represents a single tdmaBcUr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcUrRowStatusEntry  

tdmaBcUrRowStatus 1.3.6.1.4.1.562.2.4.1.136.10.1.1.1
This variable is used as the basis for SNMP naming of tdmaBcUr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

tdmaBcUrComponentName 1.3.6.1.4.1.562.2.4.1.136.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tdmaBcUrStorageType 1.3.6.1.4.1.562.2.4.1.136.10.1.1.4
This variable represents the storage type value for the tdmaBcUr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

tdmaBcUrIndex 1.3.6.1.4.1.562.2.4.1.136.10.1.1.10
This variable represents the index for the tdmaBcUr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

tdmaBcUrOperTable 1.3.6.1.4.1.562.2.4.1.136.10.10
This group contains operational attributes that measure the performance of the UpperRelay.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcUrOperEntry

tdmaBcUrOperEntry 1.3.6.1.4.1.562.2.4.1.136.10.10.1
An entry in the tdmaBcUrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcUrOperEntry  

tdmaBcUrRxBufferSize 1.3.6.1.4.1.562.2.4.1.136.10.10.1.1
This attribute indicates the size of the receive flow control buffer. This attribute may be viewed via TdmaBc/*,*,*,* UpperRelay.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

tdmaBcUrTxFlowControlState 1.3.6.1.4.1.562.2.4.1.136.10.10.1.2
This attribute indicates whether the transmit flow control is active or not. This attribute has one of the following values: active: The transmit flow control is active. inactive: The transmit flow control is inactive. This attribute may be viewed via TdmaBc/*,*,*,* UpperRelay.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(0), inactive(1)  

tdmaBcUrRxFlowControlState 1.3.6.1.4.1.562.2.4.1.136.10.10.1.3
This attribute indicates whether the receive flow control is active or not. This attribute has one of the following values: active: The receive flow control is active. inactive: The receive flow control is inactive. This attribute may be viewed via TdmaBc/*,*,*,* UpperRelay.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(0), inactive(1)  

tdmaBcUrStatsTable 1.3.6.1.4.1.562.2.4.1.136.10.11
This group contains operational attributes that measure the performance of the UpperRelay.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TdmaBcUrStatsEntry

tdmaBcUrStatsEntry 1.3.6.1.4.1.562.2.4.1.136.10.11.1
An entry in the tdmaBcUrStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TdmaBcUrStatsEntry  

tdmaBcUrTxFrames 1.3.6.1.4.1.562.2.4.1.136.10.11.1.1
This attribute counts the number of frames that are sent in the transmit direction. The counter wraps when it exceeds the maximum value. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcUrRxFrames 1.3.6.1.4.1.562.2.4.1.136.10.11.1.2
This attribute counts the number of frames that are sent in the receive direction. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcUrUnacknowledgedFrames 1.3.6.1.4.1.562.2.4.1.136.10.11.1.3
This attribute indicates the current number of frames sent that have not been acknowledged for this instance of the UpperRelay. The counter wraps when it exceeds the maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaBcUrCumUnacknowledgedFrames 1.3.6.1.4.1.562.2.4.1.136.10.11.1.4
This attribute is the total number of unacknowledged frames for this instance of the UpperRelay. It is not reset when a new call starts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

tdmaIwfGroup 1.3.6.1.4.1.562.2.4.2.140.1
OBJECT IDENTIFIER    

tdmaIwfGroupBE 1.3.6.1.4.1.562.2.4.2.140.1.5
OBJECT IDENTIFIER    

tdmaIwfGroupBE01 1.3.6.1.4.1.562.2.4.2.140.1.5.2
OBJECT IDENTIFIER    

tdmaIwfGroupBE01A 1.3.6.1.4.1.562.2.4.2.140.1.5.2.2
OBJECT IDENTIFIER    

tdmaIwfCapabilities 1.3.6.1.4.1.562.2.4.2.140.3
OBJECT IDENTIFIER    

tdmaIwfCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.140.3.5
OBJECT IDENTIFIER    

tdmaIwfCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.140.3.5.2
OBJECT IDENTIFIER    

tdmaIwfCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.140.3.5.2.2
OBJECT IDENTIFIER    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor