Nortel-Magellan-Passport-VnetNisSigMIB

File: Nortel-Magellan-Passport-VnetNisSigMIB.mib (39321 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-VoiceNetworkingMIB

Imported symbols

OBJECT-TYPE passportMIBs DisplayString
StorageType RowStatus Unsigned32
NonReplicated Link sigChanIndex
sigChan

Defined Types

SigChanNisRowStatusEntry  
SEQUENCE    
  sigChanNisRowStatus RowStatus
  sigChanNisComponentName DisplayString
  sigChanNisStorageType StorageType
  sigChanNisIndex NonReplicated

SigChanNisL2Entry  
SEQUENCE    
  sigChanNisT23 Unsigned32
  sigChanNisT200 Unsigned32
  sigChanNisN200 Unsigned32
  sigChanNisT203 Unsigned32
  sigChanNisCircuitSwitchedK Unsigned32

SigChanNisL3Entry  
SEQUENCE    
  sigChanNisT309 Unsigned32
  sigChanNisT310 Unsigned32

SigChanNisProvEntry  
SEQUENCE    
  sigChanNisSide INTEGER
  sigChanNisMaxNonCallConcurrent Unsigned32

SigChanNisStateEntry  
SEQUENCE    
  sigChanNisAdminState INTEGER
  sigChanNisOperationalState INTEGER
  sigChanNisUsageState INTEGER

SigChanNisStatsEntry  
SEQUENCE    
  sigChanNisTotalCallsToIf Unsigned32
  sigChanNisTotalCallsFromIf Unsigned32
  sigChanNisNonCallAssocSessionsToIf Unsigned32
  sigChanNisNonCallAssocSessionsFromIf Unsigned32

SigChanNisOperEntry  
SEQUENCE    
  sigChanNisActiveChannels Unsigned32
  sigChanNisActiveVoiceChannels Unsigned32
  sigChanNisActiveDataChannels Unsigned32
  sigChanNisPeakActiveChannels Unsigned32
  sigChanNisPeakActiveVoiceChannels Unsigned32
  sigChanNisPeakActiveDataChannels Unsigned32
  sigChanNisDChanStatus INTEGER

SigChanNisToolsEntry  
SEQUENCE    
  sigChanNisTracing OCTET STRING

SigChanNisNisSpecificProvEntry  
SEQUENCE    
  sigChanNisChanMaintenanceHandling INTEGER

SigChanNisFramerRowStatusEntry  
SEQUENCE    
  sigChanNisFramerRowStatus RowStatus
  sigChanNisFramerComponentName DisplayString
  sigChanNisFramerStorageType StorageType
  sigChanNisFramerIndex NonReplicated

SigChanNisFramerProvEntry  
SEQUENCE    
  sigChanNisFramerInterfaceName Link

SigChanNisFramerStateEntry  
SEQUENCE    
  sigChanNisFramerAdminState INTEGER
  sigChanNisFramerOperationalState INTEGER
  sigChanNisFramerUsageState INTEGER

SigChanNisFramerStatsEntry  
SEQUENCE    
  sigChanNisFramerFrmToIf Unsigned32
  sigChanNisFramerFrmFromIf Unsigned32
  sigChanNisFramerOctetFromIf Unsigned32
  sigChanNisFramerAborts Unsigned32
  sigChanNisFramerCrcErrors Unsigned32
  sigChanNisFramerLrcErrors Unsigned32
  sigChanNisFramerNonOctetErrors Unsigned32
  sigChanNisFramerOverruns Unsigned32
  sigChanNisFramerUnderruns Unsigned32
  sigChanNisFramerLargeFrmErrors Unsigned32

Defined Values

vnetNisSigMIB 1.3.6.1.4.1.562.2.4.2.112
OBJECT IDENTIFIER    

sigChanNis 1.3.6.1.4.1.562.2.4.1.115.8
OBJECT IDENTIFIER    

sigChanNisRowStatusTable 1.3.6.1.4.1.562.2.4.1.115.8.1
This entry controls the addition and deletion of sigChanNis components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisRowStatusEntry

sigChanNisRowStatusEntry 1.3.6.1.4.1.562.2.4.1.115.8.1.1
A single entry in the table represents a single sigChanNis component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisRowStatusEntry  

sigChanNisRowStatus 1.3.6.1.4.1.562.2.4.1.115.8.1.1.1
This variable is used as the basis for SNMP naming of sigChanNis components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

sigChanNisComponentName 1.3.6.1.4.1.562.2.4.1.115.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sigChanNisStorageType 1.3.6.1.4.1.562.2.4.1.115.8.1.1.4
This variable represents the storage type value for the sigChanNis tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

sigChanNisIndex 1.3.6.1.4.1.562.2.4.1.115.8.1.1.10
This variable represents the index for the sigChanNis tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

sigChanNisL2Table 1.3.6.1.4.1.562.2.4.1.115.8.11
This group specifies the provisionable layer 2 attributes of the Q.931 ITU-T protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisL2Entry

sigChanNisL2Entry 1.3.6.1.4.1.562.2.4.1.115.8.11.1
An entry in the sigChanNisL2Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisL2Entry  

sigChanNisT23 1.3.6.1.4.1.562.2.4.1.115.8.11.1.1
This attribute specifies the layer 2 enable request timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

sigChanNisT200 1.3.6.1.4.1.562.2.4.1.115.8.11.1.2
This attribute specifies the maximum time between a layer 2 frame and its acknowledgment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..20  

sigChanNisN200 1.3.6.1.4.1.562.2.4.1.115.8.11.1.3
This attribute specifies the maximum number of re-transmissions of a layer 2 frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..8  

sigChanNisT203 1.3.6.1.4.1.562.2.4.1.115.8.11.1.4
This attribute specifies the maximum time for which layer 2 frames may be absent. Expiry triggers a check on whether the far end is alive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 2..40  

sigChanNisCircuitSwitchedK 1.3.6.1.4.1.562.2.4.1.115.8.11.1.6
This attribute specifies the maximum number of sequentially numbered I frames (that is, window size (k)) that may be unacknowledged at any given time for a SAP supporting primary rate (64kbit/sec) signalling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..127  

sigChanNisL3Table 1.3.6.1.4.1.562.2.4.1.115.8.12
This group represents the provisionable Layer 3 timer attributes of a the Nis signalling protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisL3Entry

sigChanNisL3Entry 1.3.6.1.4.1.562.2.4.1.115.8.12.1
An entry in the sigChanNisL3Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisL3Entry  

sigChanNisT309 1.3.6.1.4.1.562.2.4.1.115.8.12.1.3
This attribute specifies the data link failure timer; used to ride out temporary failures.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 15..120  

sigChanNisT310 1.3.6.1.4.1.562.2.4.1.115.8.12.1.4
This attribute specifies the call proceeding state timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 10..120  

sigChanNisProvTable 1.3.6.1.4.1.562.2.4.1.115.8.13
This group defines the general options of the D-channel signalling link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisProvEntry

sigChanNisProvEntry 1.3.6.1.4.1.562.2.4.1.115.8.13.1
An entry in the sigChanNisProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisProvEntry  

sigChanNisSide 1.3.6.1.4.1.562.2.4.1.115.8.13.1.1
This attribute specifies whether the interface is the network or user side of the connection. The parameter applies to both the layer 2 and layer 3 of the interface. If this attribute is set to network, then the interface is master during channel negotiation. If this attribute is set to user, then the interface is slave during channel negotiation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(1), user(2)  

sigChanNisMaxNonCallConcurrent 1.3.6.1.4.1.562.2.4.1.115.8.13.1.2
This attribute specifies the maximum number of simultaneous active non-call messages that are allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30  

sigChanNisStateTable 1.3.6.1.4.1.562.2.4.1.115.8.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisStateEntry

sigChanNisStateEntry 1.3.6.1.4.1.562.2.4.1.115.8.14.1
An entry in the sigChanNisStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisStateEntry  

sigChanNisAdminState 1.3.6.1.4.1.562.2.4.1.115.8.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

sigChanNisOperationalState 1.3.6.1.4.1.562.2.4.1.115.8.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

sigChanNisUsageState 1.3.6.1.4.1.562.2.4.1.115.8.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

sigChanNisStatsTable 1.3.6.1.4.1.562.2.4.1.115.8.15
This group provides the operational components for the NisSig component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisStatsEntry

sigChanNisStatsEntry 1.3.6.1.4.1.562.2.4.1.115.8.15.1
An entry in the sigChanNisStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisStatsEntry  

sigChanNisTotalCallsToIf 1.3.6.1.4.1.562.2.4.1.115.8.15.1.2
This attribute counts the total number of calls that have been made to the interface. The value wraps when it reaches its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisTotalCallsFromIf 1.3.6.1.4.1.562.2.4.1.115.8.15.1.3
This attribute counts the total number of calls from the interface. The value wraps when it reaches its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisNonCallAssocSessionsToIf 1.3.6.1.4.1.562.2.4.1.115.8.15.1.4
This attribute counts the total number of non-call associated sessions to the interface. The value wraps when it reaches its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisNonCallAssocSessionsFromIf 1.3.6.1.4.1.562.2.4.1.115.8.15.1.5
This attribute counts the total number of non-call associated sessions from the interface. The value wraps when it reaches its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisOperTable 1.3.6.1.4.1.562.2.4.1.115.8.16
This group provides the operational attributes for the NisSig protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisOperEntry

sigChanNisOperEntry 1.3.6.1.4.1.562.2.4.1.115.8.16.1
An entry in the sigChanNisOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisOperEntry  

sigChanNisActiveChannels 1.3.6.1.4.1.562.2.4.1.115.8.16.1.1
This attribute indicates the number of currently active channels. This includes data and voice channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanNisActiveVoiceChannels 1.3.6.1.4.1.562.2.4.1.115.8.16.1.2
This attribute indicates the number of channels that are currently carrying voice.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanNisActiveDataChannels 1.3.6.1.4.1.562.2.4.1.115.8.16.1.3
This attribute indicates the number of channels that are currently carrying data. This does not include modem data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanNisPeakActiveChannels 1.3.6.1.4.1.562.2.4.1.115.8.16.1.4
This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanNisPeakActiveVoiceChannels 1.3.6.1.4.1.562.2.4.1.115.8.16.1.5
This attribute indicates the maximum number of voice channels that have been active on this signalling channel during the last polling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanNisPeakActiveDataChannels 1.3.6.1.4.1.562.2.4.1.115.8.16.1.6
This attribute indicates the maximum number of data channels that have been active on this signalling channel during the last polling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanNisDChanStatus 1.3.6.1.4.1.562.2.4.1.115.8.16.1.7
This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is enabled. If the signalling channel stays in the established state, then it is waiting for a restart from the PBX. enabling means that the resources for processing calls are being initialized. If the signalling channel stays in the enabling state then it is waiting for a restart acknowledgement from the PBX. inService means that the resources for processing calls are available. restarting means that the resources for call processing are being rei-initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER outOfService(0), establishing(1), established(2), enabling(3), inService(4), restarting(5)  

sigChanNisToolsTable 1.3.6.1.4.1.562.2.4.1.115.8.17
This contains a series of operational attributes which turn on and off several kinds of tracing.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisToolsEntry

sigChanNisToolsEntry 1.3.6.1.4.1.562.2.4.1.115.8.17.1
An entry in the sigChanNisToolsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisToolsEntry  

sigChanNisTracing 1.3.6.1.4.1.562.2.4.1.115.8.17.1.1
This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list the debug stream in in its data streams (ex. set nmis telnet session/1 dataStreams debug). Different types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and will slow down call processing on a heavily loaded card. If there is message block exhaustion tracing will be suspended for a period and then automatically reenabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occuring. Protocol errors are also reported in summary form as alarms. q931Summary - Summary of the Q.931 messages on the signalling link, including certain call details (calling number, called number, release codes). q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

sigChanNisNisSpecificProvTable 1.3.6.1.4.1.562.2.4.1.115.8.18
This group provides NIS protocol specific provisioning.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisNisSpecificProvEntry

sigChanNisNisSpecificProvEntry 1.3.6.1.4.1.562.2.4.1.115.8.18.1
An entry in the sigChanNisNisSpecificProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisNisSpecificProvEntry  

sigChanNisChanMaintenanceHandling 1.3.6.1.4.1.562.2.4.1.115.8.18.1.1
This attribute specifies how channel maintenance events should be handled upon startup. Channel maintenance events include locking and unlocking a channel or channel registration. The decision is either to send individual channel RESTART messages, SERVICE messages, or nothing. Note that channel registration only occurs after the global interface restart at startup. Setting this attribute to enable SERVICE messages ensures that SERVICE messages occur at startup and whenever a channel goes into or out of service. If this attribute is not set to enable SERVICE messaging, a RESTART is always sent on unlocking a channel. globalOnStartup provides the minimum required functionality at startup, without any individual channel confirmation. Note that when this is set, channel RESTART is still used for channel unlock. globalOnStartup applies to SigChan startup only. serviceMessage enables sending and receiving SERVICE messages. If this attribute is set to serviceMessage, SERVICE messages are used for channel maintenance on channel lock, channel unlock, and startup. restartMessage specifies that individual channel RESTARTs when the SigChan starts up. If this attribute is set to restartMessage, a RESTART message is used to send at startup and channel unlock.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER globalOnStartup(0), serviceMessage(1), restartMessage(2)  

sigChanNisFramer 1.3.6.1.4.1.562.2.4.1.115.8.2
OBJECT IDENTIFIER    

sigChanNisFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.115.8.2.1
This entry controls the addition and deletion of sigChanNisFramer components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisFramerRowStatusEntry

sigChanNisFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.115.8.2.1.1
A single entry in the table represents a single sigChanNisFramer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisFramerRowStatusEntry  

sigChanNisFramerRowStatus 1.3.6.1.4.1.562.2.4.1.115.8.2.1.1.1
This variable is used as the basis for SNMP naming of sigChanNisFramer components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

sigChanNisFramerComponentName 1.3.6.1.4.1.562.2.4.1.115.8.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sigChanNisFramerStorageType 1.3.6.1.4.1.562.2.4.1.115.8.2.1.1.4
This variable represents the storage type value for the sigChanNisFramer tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

sigChanNisFramerIndex 1.3.6.1.4.1.562.2.4.1.115.8.2.1.1.10
This variable represents the index for the sigChanNisFramer tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

sigChanNisFramerProvTable 1.3.6.1.4.1.562.2.4.1.115.8.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisFramerProvEntry

sigChanNisFramerProvEntry 1.3.6.1.4.1.562.2.4.1.115.8.2.10.1
An entry in the sigChanNisFramerProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisFramerProvEntry  

sigChanNisFramerInterfaceName 1.3.6.1.4.1.562.2.4.1.115.8.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

sigChanNisFramerStateTable 1.3.6.1.4.1.562.2.4.1.115.8.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisFramerStateEntry

sigChanNisFramerStateEntry 1.3.6.1.4.1.562.2.4.1.115.8.2.12.1
An entry in the sigChanNisFramerStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisFramerStateEntry  

sigChanNisFramerAdminState 1.3.6.1.4.1.562.2.4.1.115.8.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

sigChanNisFramerOperationalState 1.3.6.1.4.1.562.2.4.1.115.8.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

sigChanNisFramerUsageState 1.3.6.1.4.1.562.2.4.1.115.8.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

sigChanNisFramerStatsTable 1.3.6.1.4.1.562.2.4.1.115.8.2.13
This group contains the operational statistics data for a Framer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanNisFramerStatsEntry

sigChanNisFramerStatsEntry 1.3.6.1.4.1.562.2.4.1.115.8.2.13.1
An entry in the sigChanNisFramerStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SigChanNisFramerStatsEntry  

sigChanNisFramerFrmToIf 1.3.6.1.4.1.562.2.4.1.115.8.2.13.1.1
This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisFramerFrmFromIf 1.3.6.1.4.1.562.2.4.1.115.8.2.13.1.2
This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisFramerOctetFromIf 1.3.6.1.4.1.562.2.4.1.115.8.2.13.1.3
The number of bytes received from the link interface by Framer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisFramerAborts 1.3.6.1.4.1.562.2.4.1.115.8.2.13.1.4
This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisFramerCrcErrors 1.3.6.1.4.1.562.2.4.1.115.8.2.13.1.5
This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisFramerLrcErrors 1.3.6.1.4.1.562.2.4.1.115.8.2.13.1.6
This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisFramerNonOctetErrors 1.3.6.1.4.1.562.2.4.1.115.8.2.13.1.7
This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisFramerOverruns 1.3.6.1.4.1.562.2.4.1.115.8.2.13.1.8
This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisFramerUnderruns 1.3.6.1.4.1.562.2.4.1.115.8.2.13.1.9
This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanNisFramerLargeFrmErrors 1.3.6.1.4.1.562.2.4.1.115.8.2.13.1.10
This attribute counts the total number of frames received which were too large (longer than 500 bytes). This count wraps to zero after reaching its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vnetNisSigGroup 1.3.6.1.4.1.562.2.4.2.112.1
OBJECT IDENTIFIER    

vnetNisSigGroupBE 1.3.6.1.4.1.562.2.4.2.112.1.5
OBJECT IDENTIFIER    

vnetNisSigGroupBE01 1.3.6.1.4.1.562.2.4.2.112.1.5.2
OBJECT IDENTIFIER    

vnetNisSigGroupBE01A 1.3.6.1.4.1.562.2.4.2.112.1.5.2.2
OBJECT IDENTIFIER    

vnetNisSigCapabilities 1.3.6.1.4.1.562.2.4.2.112.3
OBJECT IDENTIFIER    

vnetNisSigCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.112.3.5
OBJECT IDENTIFIER    

vnetNisSigCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.112.3.5.2
OBJECT IDENTIFIER    

vnetNisSigCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.112.3.5.2.2
OBJECT IDENTIFIER