Nortel-MsCarrier-MscPassport-AlarmMIB

File: Nortel-MsCarrier-MscPassport-AlarmMIB.mib (18149 bytes)

Imported modules

RFC-1212 RFC-1215 Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB

Imported symbols

OBJECT-TYPE TRAP-TYPE DisplayString
DateAndTime RowPointer Unsigned32
Hex AsciiString HexString
DigitString mscPassportMIBs mscPassportTraps

Defined Values

alarmMIB 1.3.6.1.4.1.562.36.2.2.4
OBJECT IDENTIFIER    

mscAlarmTrap 1.3.6.1.4.1.562.36.2.1.3.2
OBJECT IDENTIFIER    

mscMandatoryAlarmInfo 1.3.6.1.4.1.562.36.2.1.3.2.7
OBJECT IDENTIFIER    

mscComponentRowPointer 1.3.6.1.4.1.562.36.2.1.3.2.7.1
A pointer to the RowStatus variable of the component emitting the alarm.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RowPointer  

mscComponentName 1.3.6.1.4.1.562.36.2.1.3.2.7.2
The textual name of the component emitting the alarm in a format suitable for use in commands entered on the `console'. It includes the name of the node from which the alarm was sent, as specified in `ModuleData nodeName'.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

mscEventTime 1.3.6.1.4.1.562.36.2.1.3.2.7.3
The date and time at which the alarmed event occurred.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DateAndTime  

mscActiveListStatus 1.3.6.1.4.1.562.36.2.1.3.2.7.4
The active alarm list status. This may be used by the Manager to add (on receiving a set) and delete (on receiving a clear) alarms from the alarm displays.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER message(0), set(1), clear(2)  

mscSeverity 1.3.6.1.4.1.562.36.2.1.3.2.7.5
The severity of the alarm which should indicate what priority that fixing this problem should be given. All values are OSI-defined; refer to CCITT X.733/ISO 10164-4 for a more complete description.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER indeterminate(0), critical(1), major(2), minor(3), warning(4), cleared(5)  

mscAlarmType 1.3.6.1.4.1.562.36.2.1.3.2.7.6
The alarm type field as defined by OSI which is used to indicate a broad category of what is wrong. The first 6 values are OSI-defined; refer to CCITT X.733/ISO 10164-4 (for the first 5) and CCITT X.736/ISO 10164-4 (for the last) for a more complete description. The value 'operator' is used when an alarm is issued due to an operator command. The values 'debug' and 'unknown' are for compatibility with older switches and are used for debugging alarms and for those which do not fit any of the above, respectively.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER communications(0), qualityOfService(1), processing(2), equipment(3), environmental(4), security(5), operator(6), debug(7), unknown(8)  

mscProbableCause 1.3.6.1.4.1.562.36.2.1.3.2.7.7
The probable cause for the alarm which usually qualifies the Alarm Type field. Most values are OSI-defined; refer refer to CCITT X.733 and X.736 (ISO 10164-4 and 10164-7) for a more complete description.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER lossOfSignal(0), lossOfFrame(1), framingError(2), localTransmissionError(3), remoteTransmissionError(4), callEstablishmentError(5), degradedSignal(6), commSubsystemFailure(7), commProtocolError(8), lanError(9), dteDceInterfaceError(10), responseTimeExcessive(20), queueSizeExceeded(21), bandwidthReduced(22), retransmissionRateReduced(23), thresholdCrossed(24), performanceDegraded(25), congestion(26), atOrNearCapacity(27), storageCapacityProblem(40), versionMismatch(41), corruptData(42), cpuCyclesLimitExceeded(43), softwareError(44), softwareProgramError(45), softwareProgramTermination(46), fileError(47), outOfMemory(48), underlyingResourceUnavail(49), applicationSubsystemFailure(50), configurationError(51), powerProblem(60), timingProblem(61), processorProblem(62), datasetModemError(63), multiplexorProblem(64), receiverFailure(65), transmitterFailure(66), outputDeviceError(67), inputDeviceError(68), ioDeviceError(69), equipmentFailure(70), adapterError(71), duplicateInfo(80), infoMissing(81), infoModification(82), infoOutOfSequence(83), unexpectedInfo(84), denialOfService(90), outOfService(91), proceduralError(92), otherOperational(93), cableTamper(100), intrusionDetection(101), otherPhysical(102), authenticationFailure(110), breachOfConfidence(111), nonRepudiationFailure(112), unauthorizedAccess(113), otherSecurityService(114), delayedInfo(120), keyExpired(121), outOfHoursActivity(122), operationalCondition(200), debugging(201), unknown(202), inactiveVirtualCircuit(203), networkServerIntervention(204)  

mscNtpIndex 1.3.6.1.4.1.562.36.2.1.3.2.7.8
An 8-digit code which is an index into an NTP to provide more description of the alarm and possible actions to take. The first 4 digits indicate a 'group' of alarms (belonging to a particular subsystem or component, etc.). The last 4 digits are a subindex arbitrarily assigned by the application which is responsible for them.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DigitString Size(8)  

mscCommentData 1.3.6.1.4.1.562.36.2.1.3.2.7.9
Additional textual information for the network operator to use. It contains only ASCII characters. Note: The total number of bytes in mscCommentData, mscOperatorData, and mscInternalData may not exceed 750 bytes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiString Size(0..750)  

mscOptionalAlarmInfo 1.3.6.1.4.1.562.36.2.1.3.2.8
OBJECT IDENTIFIER    

mscNotificationID 1.3.6.1.4.1.562.36.2.1.3.2.8.1
The notification Id of the alarm. The high-order byte is the card number of the card from which this alarm originated. The low-order 24 bits contain a sequence number which increases each time an alarm is generated. Thus, this id provides a simple way of uniquely identifying an alarm as well as the order in which alarms are generated on a card. For cross-card ordering, one would have to look at the time stamp (see dateAndTime).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Hex  

mscLpForHierClear 1.3.6.1.4.1.562.36.2.1.3.2.8.2
A pointer to the RowStatus variable of the Logical Processor the component generating the alarm is running on. A component generating an Alarm with `mscActiveListStatus = set' can include this variable in the Alarm. If the identified Logical Processor generates a Hierarchical Clear Alarm, then it will clear the Set Alarm.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RowPointer  

mscOperatorData 1.3.6.1.4.1.562.36.2.1.3.2.8.3
Additional hexadecimal information for the network operator to use. Note: The total number of bytes in mscCommentData, mscOperatorData, and mscInternalData may not exceed 750 bytes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HexString Size(0..750)  

mscPid 1.3.6.1.4.1.562.36.2.1.3.2.8.4
A string representation of the internal process id (Pid) of the process which generated the alarm (for internal use only). Note that it may or may not map to the mscComponentName field.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..25)  

mscFileName 1.3.6.1.4.1.562.36.2.1.3.2.8.5
An internal filename (for internal use only).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

mscFileLineNumber 1.3.6.1.4.1.562.36.2.1.3.2.8.6
An internal line number in the file (see filename) referred to above (for internal use only).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

mscFileVersion 1.3.6.1.4.1.562.36.2.1.3.2.8.7
A version indicator of the file (filename) referred to above (for internal use only).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

mscInternalData 1.3.6.1.4.1.562.36.2.1.3.2.8.8
An additional internal hexadecimal information for internal use only. Note: The total number of bytes in comment, operator, and internal data may not exceed 750 bytes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HexString Size(0..750)  

mscProvisionalAlarmInfo 1.3.6.1.4.1.562.36.2.1.3.2.9
OBJECT IDENTIFIER    

mscCid 1.3.6.1.4.1.562.36.2.1.3.2.9.1
This is a Custom Identifier(CID) of the component which generated the alarm
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

mscCriticalAlarm 1
This trap is used to provide a real time indication of a critical Alarm condition. The variables listed in the VARIABLES clause, defined in the `mscMandatoryAlarmInfo' group are present in all critical alarms. Additional variables as defined in the 'mscOptionalAlarmInfo' group may be included if appropriate.
TRAP-TYPE    

mscMajorAlarm 2
This trap is used to provide a real time indication of a major Alarm condition. The variables listed in the VARIABLES clause, defined in the `mscMandatoryAlarmInfo' group are present in all major alarms. Additional variables as defined in the 'mscOptionalAlarmInfo' group may be included if appropriate.
TRAP-TYPE    

mscMinorAlarm 3
This trap is used to provide a real time indication of a minor Alarm condition. The variables listed in the VARIABLES clause, defined in the `mscMandatoryAlarmInfo' group are present in all minor alarms. Additional variables as defined in the 'mscOptionalAlarmInfo' group may be included if appropriate.
TRAP-TYPE    

mscWarningAlarm 4
This trap is used to provide a real time indication of a warning Alarm condition. The variables listed in the VARIABLES clause, defined in the `mscMandatoryAlarmInfo' group are present in all warning alarms. Additional variables as defined in the 'mscOptionalAlarmInfo' group may be included if appropriate.
TRAP-TYPE    

mscClearedAlarm 5
This trap is used to provide a real time indication of a cleared Alarm. The variables listed in the VARIABLES clause, defined in the `mscMandatoryAlarmInfo' group are present in all cleared alarms. Additional variables as defined in the 'mscOptionalAlarmInfo' group may be included if appropriate.
TRAP-TYPE    

mscIndeterminateAlarm 6
This trap is used to provide a real time indication of an indeterminate Alarm condition. The variables listed in the VARIABLES clause, defined in the `mscMandatoryAlarmInfo' group are present in all indeterminate alarms. Additional variables as defined in the 'mscOptionalAlarmInfo' group may be included if appropriate.
TRAP-TYPE    

alarmGroup 1.3.6.1.4.1.562.36.2.2.4.1
OBJECT IDENTIFIER    

alarmGroupCA 1.3.6.1.4.1.562.36.2.2.4.1.1
OBJECT IDENTIFIER    

alarmGroupCA01 1.3.6.1.4.1.562.36.2.2.4.1.1.2
OBJECT IDENTIFIER    

alarmGroupCA01A 1.3.6.1.4.1.562.36.2.2.4.1.1.2.2
OBJECT IDENTIFIER    

alarmNotifications 1.3.6.1.4.1.562.36.2.2.4.2
OBJECT IDENTIFIER    

alarmNotificationsGroupCA01A 1.3.6.1.4.1.562.36.2.2.4.2.1
OBJECT IDENTIFIER    

alarmCapabilities 1.3.6.1.4.1.562.36.2.2.4.3
OBJECT IDENTIFIER    

alarmCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.4.3.1
OBJECT IDENTIFIER    

alarmCapabilitiesCA01 1.3.6.1.4.1.562.36.2.2.4.3.1.2
OBJECT IDENTIFIER    

alarmCapabilitiesCA01A 1.3.6.1.4.1.562.36.2.2.4.3.1.2.2
OBJECT IDENTIFIER