Nortel-MsCarrier-MscPassport-Frf5EpMIB

File: Nortel-MsCarrier-MscPassport-Frf5EpMIB.mib (87999 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-McsMgrMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs Counter32
RowPointer DisplayString StorageType
RowStatus Integer32 Unsigned32
AsciiString NonReplicated HexString
IntegerSequence mscMcsMgrIndex mscMcsMgr

Defined Types

MscMcsMgrFrf5EpGRowStatusEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGRowStatus RowStatus
  mscMcsMgrFrf5EpGComponentName DisplayString
  mscMcsMgrFrf5EpGStorageType StorageType
  mscMcsMgrFrf5EpGIndex Integer32

MscMcsMgrFrf5EpGAddrRowStatusEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGAddrRowStatus RowStatus
  mscMcsMgrFrf5EpGAddrComponentName DisplayString
  mscMcsMgrFrf5EpGAddrStorageType StorageType
  mscMcsMgrFrf5EpGAddrIndex NonReplicated

MscMcsMgrFrf5EpGAddrProvEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGAddrRemoteAddress AsciiString
  mscMcsMgrFrf5EpGAddrCommentText AsciiString

MscMcsMgrFrf5EpGAddrAddrPreEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGAddrAddrPreValue AsciiString
  mscMcsMgrFrf5EpGAddrAddrPreRowStatus RowStatus

MscMcsMgrFrf5EpGEpRowStatusEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpRowStatus RowStatus
  mscMcsMgrFrf5EpGEpComponentName DisplayString
  mscMcsMgrFrf5EpGEpStorageType StorageType
  mscMcsMgrFrf5EpGEpIndex Integer32

MscMcsMgrFrf5EpGEpStateEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpAdminState INTEGER
  mscMcsMgrFrf5EpGEpOperationalState INTEGER
  mscMcsMgrFrf5EpGEpUsageState INTEGER
  mscMcsMgrFrf5EpGEpAvailabilityStatus OCTET STRING
  mscMcsMgrFrf5EpGEpProceduralStatus OCTET STRING
  mscMcsMgrFrf5EpGEpControlStatus OCTET STRING
  mscMcsMgrFrf5EpGEpAlarmStatus OCTET STRING
  mscMcsMgrFrf5EpGEpStandbyStatus INTEGER
  mscMcsMgrFrf5EpGEpUnknownStatus INTEGER

MscMcsMgrFrf5EpGEpOperEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpLastVccClearCause Unsigned32
  mscMcsMgrFrf5EpGEpConnectionTransferPriority Unsigned32
  mscMcsMgrFrf5EpGEpServiceCategory INTEGER
  mscMcsMgrFrf5EpGEpPeakCellRate01 Unsigned32
  mscMcsMgrFrf5EpGEpSustainedCellRate0 Unsigned32
  mscMcsMgrFrf5EpGEpSustainedCellRate01 Unsigned32
  mscMcsMgrFrf5EpGEpMaximumBurstSize0 Unsigned32
  mscMcsMgrFrf5EpGEpMaximumBurstSize01 Unsigned32
  mscMcsMgrFrf5EpGEpAvgFrameSize Unsigned32
  mscMcsMgrFrf5EpGEpTrafficParmConversionPolicy INTEGER
  mscMcsMgrFrf5EpGEpType INTEGER
  mscMcsMgrFrf5EpGEpLastVccCauseDiag HexString

MscMcsMgrFrf5EpGEpLmiRowStatusEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpLmiRowStatus RowStatus
  mscMcsMgrFrf5EpGEpLmiComponentName DisplayString
  mscMcsMgrFrf5EpGEpLmiStorageType StorageType
  mscMcsMgrFrf5EpGEpLmiIndex NonReplicated

MscMcsMgrFrf5EpGEpLmiParmsEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpLmiProcedures INTEGER
  mscMcsMgrFrf5EpGEpLmiAsyncStatusReport INTEGER
  mscMcsMgrFrf5EpGEpLmiErrorEventThreshold Unsigned32
  mscMcsMgrFrf5EpGEpLmiEventCount Unsigned32
  mscMcsMgrFrf5EpGEpLmiCheckPointTimer Unsigned32
  mscMcsMgrFrf5EpGEpLmiSide INTEGER

MscMcsMgrFrf5EpGEpLmiNniParmsEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpLmiFullStatusPollingCycles Unsigned32
  mscMcsMgrFrf5EpGEpLmiLinkVerificationTimer Unsigned32

MscMcsMgrFrf5EpGEpLmiStateEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpLmiAdminState INTEGER
  mscMcsMgrFrf5EpGEpLmiOperationalState INTEGER
  mscMcsMgrFrf5EpGEpLmiUsageState INTEGER

MscMcsMgrFrf5EpGEpLmiPsiEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpLmiProtocolStatus INTEGER

MscMcsMgrFrf5EpGEpLmiStatsEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpLmiKeepAliveStatusToInterface Counter32
  mscMcsMgrFrf5EpGEpLmiFullStatusToInterface Counter32
  mscMcsMgrFrf5EpGEpLmiKeepAliveStatusEnqFromInterface Counter32
  mscMcsMgrFrf5EpGEpLmiFullStatusEnqFromInterface Counter32
  mscMcsMgrFrf5EpGEpLmiNetworkSideEventHistory AsciiString
  mscMcsMgrFrf5EpGEpLmiUserSideEventHistory AsciiString
  mscMcsMgrFrf5EpGEpLmiProtocolErrors Counter32
  mscMcsMgrFrf5EpGEpLmiUnexpectedIes Counter32
  mscMcsMgrFrf5EpGEpLmiSequenceErrors Counter32
  mscMcsMgrFrf5EpGEpLmiStatusSequenceErrors Counter32
  mscMcsMgrFrf5EpGEpLmiUnexpectedReports Counter32
  mscMcsMgrFrf5EpGEpLmiPollingVerifTimeouts Counter32
  mscMcsMgrFrf5EpGEpLmiNoStatusReportCount Counter32
  mscMcsMgrFrf5EpGEpLmiKeepAliveEnqToIf Counter32
  mscMcsMgrFrf5EpGEpLmiFullStatusEnqToIf Counter32

MscMcsMgrFrf5EpGEpEpdRowStatusEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpEpdRowStatus RowStatus
  mscMcsMgrFrf5EpGEpEpdComponentName DisplayString
  mscMcsMgrFrf5EpGEpEpdStorageType StorageType
  mscMcsMgrFrf5EpGEpEpdIndex NonReplicated

MscMcsMgrFrf5EpGEpEpdProvEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpEpdRemoteConnectionIdentifier IntegerSequence
  mscMcsMgrFrf5EpGEpEpdConnectionTransferPriority Unsigned32
  mscMcsMgrFrf5EpGEpEpdCommittedInformationRate Unsigned32
  mscMcsMgrFrf5EpGEpEpdExcessInformationRate Unsigned32
  mscMcsMgrFrf5EpGEpEpdCommittedBurstSize Unsigned32
  mscMcsMgrFrf5EpGEpEpdType INTEGER
  mscMcsMgrFrf5EpGEpEpdAccessRate Unsigned32
  mscMcsMgrFrf5EpGEpEpdExcessBurstSize Unsigned32

MscMcsMgrFrf5EpGEpEpdCidDataEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpEpdCustomerIdentifier Unsigned32

MscMcsMgrFrf5EpGEpDlciRowStatusEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpDlciRowStatus RowStatus
  mscMcsMgrFrf5EpGEpDlciComponentName DisplayString
  mscMcsMgrFrf5EpGEpDlciStorageType StorageType
  mscMcsMgrFrf5EpGEpDlciIndex Integer32

MscMcsMgrFrf5EpGEpDlciOperEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpDlciABitStatusToIf INTEGER
  mscMcsMgrFrf5EpGEpDlciABitReasonToIf INTEGER
  mscMcsMgrFrf5EpGEpDlciABitStatusFromIf INTEGER
  mscMcsMgrFrf5EpGEpDlciABitReasonFromIf INTEGER
  mscMcsMgrFrf5EpGEpDlciAccessConnectionComponent AsciiString

MscMcsMgrFrf5EpGEpAtmConRowStatusEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpAtmConRowStatus RowStatus
  mscMcsMgrFrf5EpGEpAtmConComponentName DisplayString
  mscMcsMgrFrf5EpGEpAtmConStorageType StorageType
  mscMcsMgrFrf5EpGEpAtmConIndex NonReplicated

MscMcsMgrFrf5EpGEpAtmConOperEntry  
SEQUENCE    
  mscMcsMgrFrf5EpGEpAtmConNextHop RowPointer

Defined Values

frf5EpMIB 1.3.6.1.4.1.562.36.2.2.121
OBJECT IDENTIFIER    

mscMcsMgrFrf5EpG 1.3.6.1.4.1.562.36.2.1.122.14
OBJECT IDENTIFIER    

mscMcsMgrFrf5EpGRowStatusTable 1.3.6.1.4.1.562.36.2.1.122.14.1
This entry controls the addition and deletion of mscMcsMgrFrf5EpG components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGRowStatusEntry

mscMcsMgrFrf5EpGRowStatusEntry 1.3.6.1.4.1.562.36.2.1.122.14.1.1
A single entry in the table represents a single mscMcsMgrFrf5EpG component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGRowStatusEntry  

mscMcsMgrFrf5EpGRowStatus 1.3.6.1.4.1.562.36.2.1.122.14.1.1.1
This variable is used as the basis for SNMP naming of mscMcsMgrFrf5EpG components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscMcsMgrFrf5EpGComponentName 1.3.6.1.4.1.562.36.2.1.122.14.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMcsMgrFrf5EpGStorageType 1.3.6.1.4.1.562.36.2.1.122.14.1.1.4
This variable represents the storage type value for the mscMcsMgrFrf5EpG tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMcsMgrFrf5EpGIndex 1.3.6.1.4.1.562.36.2.1.122.14.1.1.10
This variable represents the index for the mscMcsMgrFrf5EpG tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..8191  

mscMcsMgrFrf5EpGAddr 1.3.6.1.4.1.562.36.2.1.122.14.2
OBJECT IDENTIFIER    

mscMcsMgrFrf5EpGAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.122.14.2.1
This entry controls the addition and deletion of mscMcsMgrFrf5EpGAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGAddrRowStatusEntry

mscMcsMgrFrf5EpGAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.122.14.2.1.1
A single entry in the table represents a single mscMcsMgrFrf5EpGAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGAddrRowStatusEntry  

mscMcsMgrFrf5EpGAddrRowStatus 1.3.6.1.4.1.562.36.2.1.122.14.2.1.1.1
This variable is used as the basis for SNMP naming of mscMcsMgrFrf5EpGAddr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMcsMgrFrf5EpGAddrComponentName 1.3.6.1.4.1.562.36.2.1.122.14.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMcsMgrFrf5EpGAddrStorageType 1.3.6.1.4.1.562.36.2.1.122.14.2.1.1.4
This variable represents the storage type value for the mscMcsMgrFrf5EpGAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMcsMgrFrf5EpGAddrIndex 1.3.6.1.4.1.562.36.2.1.122.14.2.1.1.10
This variable represents the index for the mscMcsMgrFrf5EpGAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMcsMgrFrf5EpGAddrProvTable 1.3.6.1.4.1.562.36.2.1.122.14.2.10
This group contains the provisionable attributes of the Address component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGAddrProvEntry

mscMcsMgrFrf5EpGAddrProvEntry 1.3.6.1.4.1.562.36.2.1.122.14.2.10.1
An entry in the mscMcsMgrFrf5EpGAddrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGAddrProvEntry  

mscMcsMgrFrf5EpGAddrRemoteAddress 1.3.6.1.4.1.562.36.2.1.122.14.2.10.1.1
This attribute specifies the ATM End System Address (AESA) in the ISO NSAP format that is used by each EndPoint under this Frf5EpG to establish a VCC. For example, NSAP ATM address '45000006138292323F000000000020480D002900'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..44)  

mscMcsMgrFrf5EpGAddrCommentText 1.3.6.1.4.1.562.36.2.1.122.14.2.10.1.2
This optional attribute contains additional textual information to be added by the network operator.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..750)  

mscMcsMgrFrf5EpGAddrAddrPreTable 1.3.6.1.4.1.562.36.2.1.122.14.2.362
This attribute specifies the list of prefixes directed to the EndPoints under this Frf5EndPointGroup. The individual end point is selected for each subconnection on the basis of its supportedTransferPriorities. For example, E.164 prefix 'e.613722', X.121 prefix 'x.302'.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGAddrAddrPreEntry

mscMcsMgrFrf5EpGAddrAddrPreEntry 1.3.6.1.4.1.562.36.2.1.122.14.2.362.1
An entry in the mscMcsMgrFrf5EpGAddrAddrPreTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGAddrAddrPreEntry  

mscMcsMgrFrf5EpGAddrAddrPreValue 1.3.6.1.4.1.562.36.2.1.122.14.2.362.1.1
This variable represents both the value and the index for the mscMcsMgrFrf5EpGAddrAddrPreTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(3..17)  

mscMcsMgrFrf5EpGAddrAddrPreRowStatus 1.3.6.1.4.1.562.36.2.1.122.14.2.362.1.2
This variable is used to control the addition and deletion of individual values of the mscMcsMgrFrf5EpGAddrAddrPreTable.
Status: mandatory Access: write-only
OBJECT-TYPE    
  RowStatus  

mscMcsMgrFrf5EpGEp 1.3.6.1.4.1.562.36.2.1.122.14.3
OBJECT IDENTIFIER    

mscMcsMgrFrf5EpGEpRowStatusTable 1.3.6.1.4.1.562.36.2.1.122.14.3.1
This entry controls the addition and deletion of mscMcsMgrFrf5EpGEp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpRowStatusEntry

mscMcsMgrFrf5EpGEpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.1.1
A single entry in the table represents a single mscMcsMgrFrf5EpGEp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpRowStatusEntry  

mscMcsMgrFrf5EpGEpRowStatus 1.3.6.1.4.1.562.36.2.1.122.14.3.1.1.1
This variable is used as the basis for SNMP naming of mscMcsMgrFrf5EpGEp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscMcsMgrFrf5EpGEpComponentName 1.3.6.1.4.1.562.36.2.1.122.14.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMcsMgrFrf5EpGEpStorageType 1.3.6.1.4.1.562.36.2.1.122.14.3.1.1.4
This variable represents the storage type value for the mscMcsMgrFrf5EpGEp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMcsMgrFrf5EpGEpIndex 1.3.6.1.4.1.562.36.2.1.122.14.3.1.1.10
This variable represents the index for the mscMcsMgrFrf5EpGEp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

mscMcsMgrFrf5EpGEpStateTable 1.3.6.1.4.1.562.36.2.1.122.14.3.10
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpStateEntry

mscMcsMgrFrf5EpGEpStateEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.10.1
An entry in the mscMcsMgrFrf5EpGEpStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpStateEntry  

mscMcsMgrFrf5EpGEpAdminState 1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscMcsMgrFrf5EpGEpOperationalState 1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscMcsMgrFrf5EpGEpUsageState 1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscMcsMgrFrf5EpGEpAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

mscMcsMgrFrf5EpGEpProceduralStatus 1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscMcsMgrFrf5EpGEpControlStatus 1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscMcsMgrFrf5EpGEpAlarmStatus 1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscMcsMgrFrf5EpGEpStandbyStatus 1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscMcsMgrFrf5EpGEpUnknownStatus 1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscMcsMgrFrf5EpGEpOperTable 1.3.6.1.4.1.562.36.2.1.122.14.3.11
This group contains the operational attributes for the FRF.5 ATM connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpOperEntry

mscMcsMgrFrf5EpGEpOperEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1
An entry in the mscMcsMgrFrf5EpGEpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpOperEntry  

mscMcsMgrFrf5EpGEpLastVccClearCause 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.4
This attribute indicates the clear cause value of the last SPVC release message received on the FRF.5 end point Vcc pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscMcsMgrFrf5EpGEpConnectionTransferPriority 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.5
This attribute indicates the transfer priority used to establish the ATM connection and to multiplex the Frame Relay DLCIs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..15  

mscMcsMgrFrf5EpGEpServiceCategory 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.6
This attribute indicates the ATM service category that is used for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ubr(0), cbr(1), rtVbr(2), nrtVbr(3)  

mscMcsMgrFrf5EpGEpPeakCellRate01 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.8
This attribute indicates the Peak Cell Rate (PCR) of the FRF.5 ATM VCC for all cells (with CLP=0 and CLP=1). The pcr01 is derived from the End Point traffic parameters using the conversion policy of the connectionTransferPriority. The conversion policy is defined under the ModuleData FrameRelayService AtmNetworking TransferPriority/n component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMcsMgrFrf5EpGEpSustainedCellRate0 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.9
This attribute indicates the Sustained Cell Rate (SCR) of the FRF.5 ATM VCC for high priority cells (with CLP=0). The scr0 is derived from the End Point traffic parameters using the conversion policy of the connectionTransferPriority. The conversion policy is defined under the ModuleData FrameRelayService AtmNetworking TransferPriority/n component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMcsMgrFrf5EpGEpSustainedCellRate01 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.10
This attribute indicates the Sustained Cell Rate (SCR) of the FRF.5 ATM VCC for all cells (with CLP=0 and CLP=1). The scr01 is derived from the End Point traffic parameters using the conversion policy of the connectionTransferPriority. The conversion policy is defined under the ModuleData FrameRelayService AtmNetworking TransferPriority/n component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMcsMgrFrf5EpGEpMaximumBurstSize0 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.11
This attribute indicates the Maximum Burst Size (MBS) of the FRF.5 ATM VCC for high priority cells (with CLP=0). The mbs0 is derived from the End Point traffic parameters using the conversion policy of the connectionTransferPriority. The conversion policy is defined under the ModuleData FrameRelayService AtmNetworking TransferPriority/n component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMcsMgrFrf5EpGEpMaximumBurstSize01 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.12
This attribute indicates the Maximum Burst Size (MBS) of the FRF.5 ATM VCC for all cells (with CLP=0 and CLP=1). The mbs01 is derived from the End Point traffic parameters using the conversion policy of the connectionTransferPriority. The conversion policy is defined under the ModuleData FrameRelayService AtmNetworking TransferPriority/n component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMcsMgrFrf5EpGEpAvgFrameSize 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.13
This attribute indicates the average frame size that is used in the traffic parameter conversion policy calculations for this end point.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8187  

mscMcsMgrFrf5EpGEpTrafficParmConversionPolicy 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.14
This attribute indicates the traffic parameter conversion policy used to specify the equivalent ATM bandwidth rate at this end point. Policy 3 characterizes the traffic in the following way: - ATM traffic descriptor type 6 is selected - PCR0+1 is based on the AR - SCR0+1 is based on the CIR and EIR - MBS0+1 is based on Bc,Be,CIR,EIR and AR - Takes into account that the instananeous rate of the frame relay stream can burst above CIR and up tp the AR. Policy 4 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer. - PCR0+1 is based on the AR - SCR0 is based on the CIR - MBS0 is based on Bc,CIR and AR - There is no direct characterization of EIR. The allowed EIR can be derived using the difference between the AR and CIR. Policy 5 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected . Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer - PCR0+1 is based on CIR and EIR - SCR0 is based on the CIR - MBS0 is based on the Bc,CIR and AR - The maximum PCR is no longer based on AR but based on the CIR and EIR. Policy 6 characterizes the traffic in the following way: - ATM traffic descriptor type 3 is selected - PCR0+1 is based only on CIR.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER n3(3), n4(4), n5(5), n6(6)  

mscMcsMgrFrf5EpGEpType 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.15
This attribute indicates the FRF.5 End Point type. If the value is master, this End Point is responsible for initiating the call to set up the FRF.5 ATM VCC. If the value is slave, this End Point receives call setup requests from the remote end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER master(0), slave(1)  

mscMcsMgrFrf5EpGEpLastVccCauseDiag 1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.20
This attribute indicates the diagnostic value of the last SPVC release message received on the FRF.5 end point Vcc pipe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(1..8)  

mscMcsMgrFrf5EpGEpLmi 1.3.6.1.4.1.562.36.2.1.122.14.3.2
OBJECT IDENTIFIER    

mscMcsMgrFrf5EpGEpLmiRowStatusTable 1.3.6.1.4.1.562.36.2.1.122.14.3.2.1
This entry controls the addition and deletion of mscMcsMgrFrf5EpGEpLmi components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpLmiRowStatusEntry

mscMcsMgrFrf5EpGEpLmiRowStatusEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.2.1.1
A single entry in the table represents a single mscMcsMgrFrf5EpGEpLmi component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpLmiRowStatusEntry  

mscMcsMgrFrf5EpGEpLmiRowStatus 1.3.6.1.4.1.562.36.2.1.122.14.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscMcsMgrFrf5EpGEpLmi components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscMcsMgrFrf5EpGEpLmiComponentName 1.3.6.1.4.1.562.36.2.1.122.14.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMcsMgrFrf5EpGEpLmiStorageType 1.3.6.1.4.1.562.36.2.1.122.14.3.2.1.1.4
This variable represents the storage type value for the mscMcsMgrFrf5EpGEpLmi tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMcsMgrFrf5EpGEpLmiIndex 1.3.6.1.4.1.562.36.2.1.122.14.3.2.1.1.10
This variable represents the index for the mscMcsMgrFrf5EpGEpLmi tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMcsMgrFrf5EpGEpLmiParmsTable 1.3.6.1.4.1.562.36.2.1.122.14.3.2.10
This group contains the provisionable attributes of the Local Management Interface component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpLmiParmsEntry

mscMcsMgrFrf5EpGEpLmiParmsEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1
An entry in the mscMcsMgrFrf5EpGEpLmiParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpLmiParmsEntry  

mscMcsMgrFrf5EpGEpLmiProcedures 1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1.1
This attribute selects the procedures to be used for the Local Management Interface. The following are the supported procedures: none: no Local Management Interface procedures are running on the ATM VCC. This accomodates remote interworking functions which do not implement LMI procedures. In this case, the remaining attributes of this group will be ignored. ccitt: Local Management Interface procedures from the CCITT specification are supported. Dlci/0 is used for the LMI protocol, to comply with FRF.5. ansi: Local Management Interface procedures from the ANSI specification are supported. DLCI 0 is used for the LMI protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), ansi(2), ccitt(3)  

mscMcsMgrFrf5EpGEpLmiAsyncStatusReport 1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1.2
This attribute selects the use of asynchronous PVC status report procedures as specified in the CCITT specification (ITU-T Q.933, Annex A), and the ANSI specification Annex D.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscMcsMgrFrf5EpGEpLmiErrorEventThreshold 1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1.3
For the network side procedure, an event is defined as follows: (1) receipt of a STATUS ENQUIRY message, or (2) expiration of timer T392. An error event is (1) nonreceipt of STATUS ENQUIRY in T392 seconds; (2) invalid format of an LMI message; (3) invalid receive sequence number. For the user side procedure, an event is defined as a polling cycle or a status enquiry and status report exchange. An error event is (1) non-receipt of a STATUS within the polling cycle, or (2) invalid format of an LMI message, or (3) invalid sequence number. This attribute specifies the number of error events which, if they occur within eventCount events, will cause a protocol error condition. The condition is cleared after eventCount sequential correct events occur. It must be less than or equal to eventCount (n393).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

mscMcsMgrFrf5EpGEpLmiEventCount 1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1.4
This attribute specifies the number of contiguous events within which no more than eventErrorThreshold error events are allowed. It must be greater than or equal to errorEventThreshold (n392).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

mscMcsMgrFrf5EpGEpLmiCheckPointTimer 1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1.5
This attribute selects the time (in seconds) within which a STATUS ENQUIRY message is expected. It must be greater than linkVerificationTimer (t391).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 5..255  

mscMcsMgrFrf5EpGEpLmiSide 1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1.8
This attribute selects the user side procedure (DTE), or the network side procedure (DCE), or both the user side and the network side procedures of the LMI. This attribute can be set to user, network or both.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(0), user(1), both(2)  

mscMcsMgrFrf5EpGEpLmiNniParmsTable 1.3.6.1.4.1.562.36.2.1.122.14.3.2.11
This group contains the provisionable attributes of the FRF.5 LMI procedures which are unique to NNI.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpLmiNniParmsEntry

mscMcsMgrFrf5EpGEpLmiNniParmsEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.2.11.1
An entry in the mscMcsMgrFrf5EpGEpLmiNniParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpLmiNniParmsEntry  

mscMcsMgrFrf5EpGEpLmiFullStatusPollingCycles 1.3.6.1.4.1.562.36.2.1.122.14.3.2.11.1.1
This attribute specifies how frequently the FRF.5 LMI initiates a Status Enquiry for a full PVC status report. A polling cycle is a Status Enquiry and Status Report exchange.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

mscMcsMgrFrf5EpGEpLmiLinkVerificationTimer 1.3.6.1.4.1.562.36.2.1.122.14.3.2.11.1.2
This attribute specifies how frequently the FRF.5 LMI initiates a Status Enquiry for link integrity verification. It must be less than checkPointTimer (t392).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 5..255  

mscMcsMgrFrf5EpGEpLmiStateTable 1.3.6.1.4.1.562.36.2.1.122.14.3.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpLmiStateEntry

mscMcsMgrFrf5EpGEpLmiStateEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.2.12.1
An entry in the mscMcsMgrFrf5EpGEpLmiStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpLmiStateEntry  

mscMcsMgrFrf5EpGEpLmiAdminState 1.3.6.1.4.1.562.36.2.1.122.14.3.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscMcsMgrFrf5EpGEpLmiOperationalState 1.3.6.1.4.1.562.36.2.1.122.14.3.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscMcsMgrFrf5EpGEpLmiUsageState 1.3.6.1.4.1.562.36.2.1.122.14.3.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscMcsMgrFrf5EpGEpLmiPsiTable 1.3.6.1.4.1.562.36.2.1.122.14.3.2.13
This group provides the protocol status of the Local Management Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpLmiPsiEntry

mscMcsMgrFrf5EpGEpLmiPsiEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.2.13.1
An entry in the mscMcsMgrFrf5EpGEpLmiPsiTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpLmiPsiEntry  

mscMcsMgrFrf5EpGEpLmiProtocolStatus 1.3.6.1.4.1.562.36.2.1.122.14.3.2.13.1.1
This attribute indicates whether the LMI is in an error condition or whether the protocol is behaving normally. This attribute will be set to errorCondition after enough LMI errors have been detected to warrant a change in condition. This occurs when n392 of the last n393 events are in error. The error condition is lifted when a sufficient number of consecutive events has occurred without error. This occurs when n393 consecutive good events take place. The consequence of an error condition is that all DLCIs on this interface will become inactive in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER errorCondition(0), normalCondition(1)  

mscMcsMgrFrf5EpGEpLmiStatsTable 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14
This group contains the operational statistics for the FRF.5 NNI Local Management Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpLmiStatsEntry

mscMcsMgrFrf5EpGEpLmiStatsEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1
An entry in the mscMcsMgrFrf5EpGEpLmiStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpLmiStatsEntry  

mscMcsMgrFrf5EpGEpLmiKeepAliveStatusToInterface 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.1
This attribute counts the Local Management Interface keep alive status messages sent to the ATM VCC in response to a status enquiry for keep alive status. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpLmiFullStatusToInterface 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.2
This attribute counts the Local Management Interface full status messages sent to the ATM VCC in response to a status enquiry for keep alive or full status. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpLmiKeepAliveStatusEnqFromInterface 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.3
This attribute counts the Local Management Interface valid keep alive status enquiry messages received from the ATM VCC. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpLmiFullStatusEnqFromInterface 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.4
This attribute counts the Local Management Interface valid full status enquiry messages received from the ATM VCC. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpLmiNetworkSideEventHistory 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.5
This attribute displays the Local Management Interface network side procedure event history in order of occurrence. An event is represented by a single symbol. A '+' symbol indicates a good event. An 'X' symbol indicates a protocol error event. The left most event is the most recent to occur. The provisioned eventCount dictates the maximum number of events displayed. A good event is triggered by receipt of a valid status enquiry message. An error event is either a T392 timer expiry or receipt of a status enquiry with an incorrect sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..10)  

mscMcsMgrFrf5EpGEpLmiUserSideEventHistory 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.6
This attribute displays the Local Management Interface user side procedure event history in order of occurrence. An event is represented by a single symbol. A '+' symbol indicates a good event. An 'X' symbol indicates a protocol error event. The left most event is the most recent to occur. The provisioned eventCount dictates the maximum number of events displayed. A good event is triggered by receipt of a valid status message. An error event is either a T391 timer expiry or receipt of a status message with an incorrect sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..10)  

mscMcsMgrFrf5EpGEpLmiProtocolErrors 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.7
This attribute counts the number of Local Management Interface protocol errors. It is the sum of the sequence (sequenceErrors and statusSequenceErrors) and timeout (pollingVerifTimeouts and noStatusReportCount) errors. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpLmiUnexpectedIes 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.8
This attribute counts the number of Local Managament Interface frames received with an Information Element identifier that is unknown or unexpected. An unexpected Information Element is not a protocol error. When the maximum count is reached, this counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpLmiSequenceErrors 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.9
This attribute counts the number of Local Management Interface Status Enquiry message sequence errors. A sequence error is receipt of a Status Enquiry message with a receive sequence number not equal to the last send sequence number. When the maximum count is reached the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpLmiStatusSequenceErrors 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.10
This attribute counts the number of Local Management Interface Status message sequence errors. A sequence error is receipt of a Status message with a receive sequence number not equal to the last send sequence number. When the maximum count is reached the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpLmiUnexpectedReports 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.11
This attribute counts the number of Local Management Interface frames received with an unknown or unexpected report type. An unexpected report type is not a protocol error. When the maximum count is reached the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpLmiPollingVerifTimeouts 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.12
This attribute counts the checkPointTimer (T392) expiries occurring on the Local Management Interface. When the maximum count is reached the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpLmiNoStatusReportCount 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.13
This attribute counts the number of times when no status report or an invalid status report comes from the external network. This attribute is incremented: i) after a status enquiry is sent out and the T391 timer expires without having a status report received. ii) if an invalid status report is received. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpLmiKeepAliveEnqToIf 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.14
This attribute counts the number of Local Management Interface keep alive enquiry status messages sent to the external user device for keep alive status. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpLmiFullStatusEnqToIf 1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.15
This attribute counts the number of Local Management Interface full status messages sent to the external user device in response to a status enquiry for keep alive or full status. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMcsMgrFrf5EpGEpEpd 1.3.6.1.4.1.562.36.2.1.122.14.3.3
OBJECT IDENTIFIER    

mscMcsMgrFrf5EpGEpEpdRowStatusTable 1.3.6.1.4.1.562.36.2.1.122.14.3.3.1
This entry controls the addition and deletion of mscMcsMgrFrf5EpGEpEpd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpEpdRowStatusEntry

mscMcsMgrFrf5EpGEpEpdRowStatusEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.3.1.1
A single entry in the table represents a single mscMcsMgrFrf5EpGEpEpd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpEpdRowStatusEntry  

mscMcsMgrFrf5EpGEpEpdRowStatus 1.3.6.1.4.1.562.36.2.1.122.14.3.3.1.1.1
This variable is used as the basis for SNMP naming of mscMcsMgrFrf5EpGEpEpd components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMcsMgrFrf5EpGEpEpdComponentName 1.3.6.1.4.1.562.36.2.1.122.14.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMcsMgrFrf5EpGEpEpdStorageType 1.3.6.1.4.1.562.36.2.1.122.14.3.3.1.1.4
This variable represents the storage type value for the mscMcsMgrFrf5EpGEpEpd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMcsMgrFrf5EpGEpEpdIndex 1.3.6.1.4.1.562.36.2.1.122.14.3.3.1.1.10
This variable represents the index for the mscMcsMgrFrf5EpGEpEpd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMcsMgrFrf5EpGEpEpdProvTable 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10
This group contains the provisionable attributes of the FRF.5 End Point.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpEpdProvEntry

mscMcsMgrFrf5EpGEpEpdProvEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1
An entry in the mscMcsMgrFrf5EpGEpEpdProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpEpdProvEntry  

mscMcsMgrFrf5EpGEpEpdRemoteConnectionIdentifier 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.3
This attribute specifies the remote connection identifier. It either represents the VPI.VCI logical channel number assignment of a remote ATM interface, or the Endpoint.Frf5EndPointGroup instances of a remote Passport FRF.5 EndPoint.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IntegerSequence Size(3..9)  

mscMcsMgrFrf5EpGEpEpdConnectionTransferPriority 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.4
This attribute specifies the transfer priority used to establish the ATM connection. The EndPoint references the ModuleData FrameRelayService AtmNetworking TransferPriority/n component to determine the ATM service category to be used by the connection. This attribute is also used to determine which EndPoint within an Frf5EndPointGroup is to multiplex a particular FrAtm Dlci. DESCRIPTION
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

mscMcsMgrFrf5EpGEpEpdCommittedInformationRate 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.5
This attribute specifies the committed information rate (CIR), and represents the rate at which the network FRF.5 ATM VCC agrees to transfer information under normal conditions. A conservative CIR value would be the sum of the CIRs of all the individual FrAtm Dlcis multiplexed by the VCC. The cir is converted into ATM service parameters according to the conversion policy specified by the connectionTransferPriority attribute. The conversion policy is defined under the ModuleData FrameRelayService AtmNetworking TransferPriority/n component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

mscMcsMgrFrf5EpGEpEpdExcessInformationRate 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.6
This attribute specifies the excess information rate (EIR), and represents the rate at which the network FRF.5 ATM VCC attempts to transfer information. A conservative EIR value would be the sum of the EIRs of all the individual FrAtm Dlcis multiplexed by the VCC. The eir is converted into ATM service parameters according to the conversion policy specified by the connectionTransferPriority attribute. The conversion policy is defined under the ModuleData FrameRelayService AtmNetworking TransferPriority/n component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

mscMcsMgrFrf5EpGEpEpdCommittedBurstSize 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.7
This attribute specifies the committed burst size (Bc), and represents the amount of data that the network FRF.5 ATM VCC agrees to transfer under normal conditions. A conservative Bc value would be the sum of the Bcs of all the individual FrAtm Dlcis multiplexed by the VCC. The bc is converted into ATM service parameters according to the conversion policy specified by the connectionTransferPriority attribute. The conversion policy is defined under the ModuleData FrameRelayService AtmNetworking TransferPriority/n component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

mscMcsMgrFrf5EpGEpEpdType 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.8
This attribute specifies the FRF.5 End Point type. If the value is provisioned as master, this End Point is responsible for initiating the SPVC call to set up the FRF.5 ATM VCC. If the value is provisioned as slave, this End Point receives call setup requests from a master remote end.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER master(0), slave(1)  

mscMcsMgrFrf5EpGEpEpdAccessRate 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.9
This attribute represents the access rate of the FRF.5 EndPoint. A conservative value would be the sum of the access rates of all the FrAtms' that have DLCIs multiplexed by the VCC. The access rate is converted into ATM service parameters when conversion policies 3, 4 and 5 are used. For policy 6, this attribute is ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

mscMcsMgrFrf5EpGEpEpdExcessBurstSize 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.10
This attribute specifies the excess burst size (Be), and represents the amount of uncommitted data that the network FRF.5 ATM VCC agrees to transfer under normal conditions. A conservative Be value would be the sum of the Bes of all the individual FrAtm Dlcis multiplexed by the VCC. The be is converted into ATM service parameters according to the conversion policy specified by the connectionTransferPriority attribute. The conversion policy is defined under the ModuleData FrameRelayService AtmNetworking TransferPriority/n component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

mscMcsMgrFrf5EpGEpEpdCidDataTable 1.3.6.1.4.1.562.36.2.1.122.14.3.3.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpEpdCidDataEntry

mscMcsMgrFrf5EpGEpEpdCidDataEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.3.11.1
An entry in the mscMcsMgrFrf5EpGEpEpdCidDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpEpdCidDataEntry  

mscMcsMgrFrf5EpGEpEpdCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.122.14.3.3.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscMcsMgrFrf5EpGEpDlci 1.3.6.1.4.1.562.36.2.1.122.14.3.4
OBJECT IDENTIFIER    

mscMcsMgrFrf5EpGEpDlciRowStatusTable 1.3.6.1.4.1.562.36.2.1.122.14.3.4.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscMcsMgrFrf5EpGEpDlci components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpDlciRowStatusEntry

mscMcsMgrFrf5EpGEpDlciRowStatusEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.4.1.1
A single entry in the table represents a single mscMcsMgrFrf5EpGEpDlci component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpDlciRowStatusEntry  

mscMcsMgrFrf5EpGEpDlciRowStatus 1.3.6.1.4.1.562.36.2.1.122.14.3.4.1.1.1
This variable is used as the basis for SNMP naming of mscMcsMgrFrf5EpGEpDlci components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMcsMgrFrf5EpGEpDlciComponentName 1.3.6.1.4.1.562.36.2.1.122.14.3.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMcsMgrFrf5EpGEpDlciStorageType 1.3.6.1.4.1.562.36.2.1.122.14.3.4.1.1.4
This variable represents the storage type value for the mscMcsMgrFrf5EpGEpDlci tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMcsMgrFrf5EpGEpDlciIndex 1.3.6.1.4.1.562.36.2.1.122.14.3.4.1.1.10
This variable represents the index for the mscMcsMgrFrf5EpGEpDlci tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 16..1007 | 1022  

mscMcsMgrFrf5EpGEpDlciOperTable 1.3.6.1.4.1.562.36.2.1.122.14.3.4.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for the FRF.5 DLCI.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpDlciOperEntry

mscMcsMgrFrf5EpGEpDlciOperEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.4.10.1
An entry in the mscMcsMgrFrf5EpGEpDlciOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpDlciOperEntry  

mscMcsMgrFrf5EpGEpDlciABitStatusToIf 1.3.6.1.4.1.562.36.2.1.122.14.3.4.10.1.1
This attribute indicates the most recent A-bit status sent to the ATM VCC. If the value is inactive, the reason for the LMI failure is given by the aBitReasonToNetwork.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

mscMcsMgrFrf5EpGEpDlciABitReasonToIf 1.3.6.1.4.1.562.36.2.1.122.14.3.4.10.1.2
This attribute indicates the reason for the latest inactive A-bit status sent to the ATM VCC. The value is notApplicable when the aBitStatusToNetwork is active. The value is remoteUserSignaled if the FrAtm originating the A-Bit status has detected that the virtual circuit is down at the remote network through the LMI protocol. The FrAtm must be running network site LMI protocol for this A-Bit status reason to be sent. The value is localLmiError if the LMI protocol is down at this Ep. The value is remoteLmiError if the LMI protocol is down at the FrAtm originating this A-Bit status reason. The value is localLinkDown if the physical interface is disabled at this Ep. The value is pvcDown if no A-Bit status has been sent to this Ep (i.e., no A-Bit status has been relayed from the FrAtm). The value is remoteLinkDown if the physical interface is disabled at the FrAtm originating this A-Bit status reason.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), remoteUserSignaled(1), localLmiError(2), remoteLmiError(3), localLinkDown(4), remoteLinkDown(5), pvcDown(6)  

mscMcsMgrFrf5EpGEpDlciABitStatusFromIf 1.3.6.1.4.1.562.36.2.1.122.14.3.4.10.1.3
This attribute indicates the most recent A-bit status received from the ATM VCC. If the value is inactive, the reason for the LMI failure is given by the aBitReasonFromNetwork.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

mscMcsMgrFrf5EpGEpDlciABitReasonFromIf 1.3.6.1.4.1.562.36.2.1.122.14.3.4.10.1.4
This attributes indicates the reason for the latest inactive A-bit status received from the ATM VCC. The value is notApplicable when the aBitStatusFromNetwork is active. The value is remoteUserSignaled if the remote FRF.5 End Point originating the A-Bit status has detected that the virtual circuit is down at the remote network through the LMI protocol. The remote FRF.5 End Point must be running network site LMI protocol for this A-Bit status reason to be sent. The value is localLmiError if the LMI protocol is down at this Ep. The value is localLinkDown if the physical interface is disabled at this Ep. The value is missingFromLmiReport if the remote FRF.5 End Point did not provide a reason along with the inactive A-Bit status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), remoteUserSignalled(1), localLmiError(2), localLinkDown(4), missingFromLmiReport(7)  

mscMcsMgrFrf5EpGEpDlciAccessConnectionComponent 1.3.6.1.4.1.562.36.2.1.122.14.3.4.10.1.5
This attribute identifies the FrAtm Dlci to which this Dlci component is bound.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..23)  

mscMcsMgrFrf5EpGEpAtmCon 1.3.6.1.4.1.562.36.2.1.122.14.3.5
OBJECT IDENTIFIER    

mscMcsMgrFrf5EpGEpAtmConRowStatusTable 1.3.6.1.4.1.562.36.2.1.122.14.3.5.1
This entry controls the addition and deletion of mscMcsMgrFrf5EpGEpAtmCon components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpAtmConRowStatusEntry

mscMcsMgrFrf5EpGEpAtmConRowStatusEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.5.1.1
A single entry in the table represents a single mscMcsMgrFrf5EpGEpAtmCon component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpAtmConRowStatusEntry  

mscMcsMgrFrf5EpGEpAtmConRowStatus 1.3.6.1.4.1.562.36.2.1.122.14.3.5.1.1.1
This variable is used as the basis for SNMP naming of mscMcsMgrFrf5EpGEpAtmCon components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMcsMgrFrf5EpGEpAtmConComponentName 1.3.6.1.4.1.562.36.2.1.122.14.3.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMcsMgrFrf5EpGEpAtmConStorageType 1.3.6.1.4.1.562.36.2.1.122.14.3.5.1.1.4
This variable represents the storage type value for the mscMcsMgrFrf5EpGEpAtmCon tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMcsMgrFrf5EpGEpAtmConIndex 1.3.6.1.4.1.562.36.2.1.122.14.3.5.1.1.10
This variable represents the index for the mscMcsMgrFrf5EpGEpAtmCon tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMcsMgrFrf5EpGEpAtmConOperTable 1.3.6.1.4.1.562.36.2.1.122.14.3.5.10
This attribute group contains the operational attributes for the NapAtmConnection component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMcsMgrFrf5EpGEpAtmConOperEntry

mscMcsMgrFrf5EpGEpAtmConOperEntry 1.3.6.1.4.1.562.36.2.1.122.14.3.5.10.1
An entry in the mscMcsMgrFrf5EpGEpAtmConOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMcsMgrFrf5EpGEpAtmConOperEntry  

mscMcsMgrFrf5EpGEpAtmConNextHop 1.3.6.1.4.1.562.36.2.1.122.14.3.5.10.1.1
This attribute shows the component name of the AtmIf Vcc Ep or AtmCon component to which this switched connection is established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

frf5EpGroup 1.3.6.1.4.1.562.36.2.2.121.1
OBJECT IDENTIFIER    

frf5EpGroupCA 1.3.6.1.4.1.562.36.2.2.121.1.1
OBJECT IDENTIFIER    

frf5EpGroupCA02 1.3.6.1.4.1.562.36.2.2.121.1.1.3
OBJECT IDENTIFIER    

frf5EpGroupCA02A 1.3.6.1.4.1.562.36.2.2.121.1.1.3.2
OBJECT IDENTIFIER    

frf5EpCapabilities 1.3.6.1.4.1.562.36.2.2.121.3
OBJECT IDENTIFIER    

frf5EpCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.121.3.1
OBJECT IDENTIFIER    

frf5EpCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.121.3.1.3
OBJECT IDENTIFIER    

frf5EpCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.121.3.1.3.2
OBJECT IDENTIFIER