Nortel-MsCarrier-MscPassport-ModAtmQosMIB

File: Nortel-MsCarrier-MscPassport-ModAtmQosMIB.mib (14592 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-ModCommonMIB Nortel-MsCarrier-MscPassport-BaseShelfMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs DisplayString
StorageType RowStatus Integer32
Unsigned32 NonReplicated mscModFrsIndex
mscModFrs mscModIndex

Defined Types

MscModFrsAtmNetRowStatusEntry  
SEQUENCE    
  mscModFrsAtmNetRowStatus RowStatus
  mscModFrsAtmNetComponentName DisplayString
  mscModFrsAtmNetStorageType StorageType
  mscModFrsAtmNetIndex NonReplicated

MscModFrsAtmNetProvEntry  
SEQUENCE    
  mscModFrsAtmNetRetryTimerPeriod Unsigned32

MscModFrsAtmNetTpmRowStatusEntry  
SEQUENCE    
  mscModFrsAtmNetTpmRowStatus RowStatus
  mscModFrsAtmNetTpmComponentName DisplayString
  mscModFrsAtmNetTpmStorageType StorageType
  mscModFrsAtmNetTpmIndex Integer32

MscModFrsAtmNetTpmProvEntry  
SEQUENCE    
  mscModFrsAtmNetTpmEmissionPriority Unsigned32
  mscModFrsAtmNetTpmAtmServiceCategory INTEGER
  mscModFrsAtmNetTpmAvgFrameSize Unsigned32
  mscModFrsAtmNetTpmTrafficParmConversionPolicy INTEGER
  mscModFrsAtmNetTpmAssignedBandwidthPool INTEGER

Defined Values

modAtmQosMIB 1.3.6.1.4.1.562.36.2.2.75
OBJECT IDENTIFIER    

mscModFrsAtmNet 1.3.6.1.4.1.562.36.2.1.16.3.2
OBJECT IDENTIFIER    

mscModFrsAtmNetRowStatusTable 1.3.6.1.4.1.562.36.2.1.16.3.2.1
This entry controls the addition and deletion of mscModFrsAtmNet components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscModFrsAtmNetRowStatusEntry

mscModFrsAtmNetRowStatusEntry 1.3.6.1.4.1.562.36.2.1.16.3.2.1.1
A single entry in the table represents a single mscModFrsAtmNet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscModFrsAtmNetRowStatusEntry  

mscModFrsAtmNetRowStatus 1.3.6.1.4.1.562.36.2.1.16.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscModFrsAtmNet components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscModFrsAtmNetComponentName 1.3.6.1.4.1.562.36.2.1.16.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscModFrsAtmNetStorageType 1.3.6.1.4.1.562.36.2.1.16.3.2.1.1.4
This variable represents the storage type value for the mscModFrsAtmNet tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscModFrsAtmNetIndex 1.3.6.1.4.1.562.36.2.1.16.3.2.1.1.10
This variable represents the index for the mscModFrsAtmNet tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscModFrsAtmNetProvTable 1.3.6.1.4.1.562.36.2.1.16.3.2.10
This group contains information related to the Frame Relay to ATM interworking.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscModFrsAtmNetProvEntry

mscModFrsAtmNetProvEntry 1.3.6.1.4.1.562.36.2.1.16.3.2.10.1
An entry in the mscModFrsAtmNetProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscModFrsAtmNetProvEntry  

mscModFrsAtmNetRetryTimerPeriod 1.3.6.1.4.1.562.36.2.1.16.3.2.10.1.1
This attribute specifies the module wide retry timer interval for failed SPVC calls using Frame Relay to ATM Networking. Changes to this attribute will take effect on subsequent call setups.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 30..300  

mscModFrsAtmNetTpm 1.3.6.1.4.1.562.36.2.1.16.3.2.2
OBJECT IDENTIFIER    

mscModFrsAtmNetTpmRowStatusTable 1.3.6.1.4.1.562.36.2.1.16.3.2.2.1
This entry controls the addition and deletion of mscModFrsAtmNetTpm components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscModFrsAtmNetTpmRowStatusEntry

mscModFrsAtmNetTpmRowStatusEntry 1.3.6.1.4.1.562.36.2.1.16.3.2.2.1.1
A single entry in the table represents a single mscModFrsAtmNetTpm component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscModFrsAtmNetTpmRowStatusEntry  

mscModFrsAtmNetTpmRowStatus 1.3.6.1.4.1.562.36.2.1.16.3.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscModFrsAtmNetTpm components. These components can be added.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscModFrsAtmNetTpmComponentName 1.3.6.1.4.1.562.36.2.1.16.3.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscModFrsAtmNetTpmStorageType 1.3.6.1.4.1.562.36.2.1.16.3.2.2.1.1.4
This variable represents the storage type value for the mscModFrsAtmNetTpm tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscModFrsAtmNetTpmIndex 1.3.6.1.4.1.562.36.2.1.16.3.2.2.1.1.10
This variable represents the index for the mscModFrsAtmNetTpm tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

mscModFrsAtmNetTpmProvTable 1.3.6.1.4.1.562.36.2.1.16.3.2.2.2
This group specifies the mapping from Frame Relay parameters to ATM parameters for a Frame Relay using the defined transfer priority.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscModFrsAtmNetTpmProvEntry

mscModFrsAtmNetTpmProvEntry 1.3.6.1.4.1.562.36.2.1.16.3.2.2.2.1
An entry in the mscModFrsAtmNetTpmProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscModFrsAtmNetTpmProvEntry  

mscModFrsAtmNetTpmEmissionPriority 1.3.6.1.4.1.562.36.2.1.16.3.2.2.2.1.1
This attribute specifies the egress emission priority at the FR to ATM interface. A value of 3 specifies the highest priority, whereas a value of 0 specifies the lowest priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3  

mscModFrsAtmNetTpmAtmServiceCategory 1.3.6.1.4.1.562.36.2.1.16.3.2.2.2.1.2
This attribute specifies the ATM class of service value to be used on a transport connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ubr(0), cbr(1), rtVbr(2), nrtVbr(3)  

mscModFrsAtmNetTpmAvgFrameSize 1.3.6.1.4.1.562.36.2.1.16.3.2.2.2.1.3
This attribute specifies the average frame size that is used in the traffic parameter conversion policy calculations for this transfer priority to determine the overhead factor for FR to ATM interworking. The overhead factor affects the granularity of the bandwidth requirements. The values should be identical across the network. Otherwise, there may result in bandwidth conversion inconsistencies.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..8187  

mscModFrsAtmNetTpmTrafficParmConversionPolicy 1.3.6.1.4.1.562.36.2.1.16.3.2.2.2.1.4
This attribute specifies the traffic parameter conversion policy to use for this transfer priority to specify the equivalent bandwidth rate at the FrAtm interface. Policy 3 characterizes the traffic in the following way: - ATM traffic descriptor type 6 is selected - PCR0+1 is based on the AR - SCR0+1 is based on the CIR and EIR - MBS0+1 is based on Bc,Be,CIR,EIR and AR - Takes into account that the instananeous rate of the frame relay stream can burst above CIR and up tp the AR. Policy 4 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer. - PCR0+1 is based on the AR - SCR0 is based on the CIR - MBS0 is based on Bc,CIR and AR - There is no direct characterization of EIR. The allowed EIR can be derived using the difference between the AR and CIR. Policy 5 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected . Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer - PCR0+1 is based on CIR and EIR - SCR0 is based on the CIR - MBS0 is based on the Bc,CIR and AR - The maximum PCR is no longer based on AR but based on the CIR and EIR. Policy 6 characterizes the traffic in the following way: - ATM traffic descriptor type 3 is selected - PCR0+1 is based only on CIR.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n3(3), n4(4), n5(5), n6(6)  

mscModFrsAtmNetTpmAssignedBandwidthPool 1.3.6.1.4.1.562.36.2.1.16.3.2.2.2.1.5
This attribute specifies the bandwidth pool which is used to support this transfer priority. The bandwidth pool is defined in the frAtm Ca component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15)  

modAtmQosGroup 1.3.6.1.4.1.562.36.2.2.75.1
OBJECT IDENTIFIER    

modAtmQosGroupCA 1.3.6.1.4.1.562.36.2.2.75.1.1
OBJECT IDENTIFIER    

modAtmQosGroupCA02 1.3.6.1.4.1.562.36.2.2.75.1.1.3
OBJECT IDENTIFIER    

modAtmQosGroupCA02A 1.3.6.1.4.1.562.36.2.2.75.1.1.3.2
OBJECT IDENTIFIER    

modAtmQosCapabilities 1.3.6.1.4.1.562.36.2.2.75.3
OBJECT IDENTIFIER    

modAtmQosCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.75.3.1
OBJECT IDENTIFIER    

modAtmQosCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.75.3.1.3
OBJECT IDENTIFIER    

modAtmQosCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.75.3.1.3.2
OBJECT IDENTIFIER    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor