Nortel-MsCarrier-MscPassport-MpaNetworkLinkMIB

File: Nortel-MsCarrier-MscPassport-MpaNetworkLinkMIB.mib (301836 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs mscComponents
Counter32 RowPointer DisplayString
StorageType RowStatus InterfaceIndex
Gauge32 Integer32 Unsigned32
AsciiString Hex NonReplicated
HexString EnterpriseDateAndTime PassportCounter64
Link DigitString Unsigned64

Defined Types

MscMpanlRowStatusEntry  
SEQUENCE    
  mscMpanlRowStatus RowStatus
  mscMpanlComponentName DisplayString
  mscMpanlStorageType StorageType
  mscMpanlIndex Integer32

MscMpanlCidDataEntry  
SEQUENCE    
  mscMpanlCustomerIdentifier Unsigned32

MscMpanlProvEntry  
SEQUENCE    
  mscMpanlCommentText AsciiString

MscMpanlEmissionPriorityQsEntry  
SEQUENCE    
  mscMpanlNumberOfEmissionQs Unsigned32

MscMpanlStateEntry  
SEQUENCE    
  mscMpanlAdminState INTEGER
  mscMpanlOperationalState INTEGER
  mscMpanlUsageState INTEGER
  mscMpanlAvailabilityStatus OCTET STRING
  mscMpanlProceduralStatus OCTET STRING
  mscMpanlControlStatus OCTET STRING
  mscMpanlAlarmStatus OCTET STRING
  mscMpanlStandbyStatus INTEGER
  mscMpanlUnknownStatus INTEGER

MscMpanlStatsEntry  
SEQUENCE    
  mscMpanlLastUnknownDlci Unsigned32
  mscMpanlUnknownDlciFramesFromIf Counter32
  mscMpanlInvalidHeaderFramesFromIf Counter32

MscMpanlTrafficStatsEntry  
SEQUENCE    
  mscMpanlFrmToIf Unsigned32
  mscMpanlOctetToIf Unsigned32
  mscMpanlFrmFromIf Unsigned32
  mscMpanlOctetFromIf Unsigned32

MscMpanlIfEntryEntry  
SEQUENCE    
  mscMpanlIfAdminStatus INTEGER
  mscMpanlIfIndex InterfaceIndex

MscMpanlOperStatusEntry  
SEQUENCE    
  mscMpanlSnmpOperStatus INTEGER

MscMpanlOperEntry  
SEQUENCE    
  mscMpanlRoundTripDelay Unsigned32

MscMpanlFrmToIfByQueueEntry  
SEQUENCE    
  mscMpanlFrmToIfByQueueIndex Integer32
  mscMpanlFrmToIfByQueueValue Unsigned32

MscMpanlOctetToIfByQueueEntry  
SEQUENCE    
  mscMpanlOctetToIfByQueueIndex Integer32
  mscMpanlOctetToIfByQueueValue Unsigned32

MscMpanlDnaRowStatusEntry  
SEQUENCE    
  mscMpanlDnaRowStatus RowStatus
  mscMpanlDnaComponentName DisplayString
  mscMpanlDnaStorageType StorageType
  mscMpanlDnaIndex NonReplicated

MscMpanlDnaOutgoingOptionsEntry  
SEQUENCE    
  mscMpanlDnaDefaultTransferPriority INTEGER

MscMpanlDnaCallOptionsEntry  
SEQUENCE    
  mscMpanlDnaAccountClass Unsigned32
  mscMpanlDnaAccountCollection OCTET STRING
  mscMpanlDnaServiceExchange Unsigned32
  mscMpanlDnaEgressAccounting INTEGER

MscMpanlFramerRowStatusEntry  
SEQUENCE    
  mscMpanlFramerRowStatus RowStatus
  mscMpanlFramerComponentName DisplayString
  mscMpanlFramerStorageType StorageType
  mscMpanlFramerIndex NonReplicated

MscMpanlFramerProvEntry  
SEQUENCE    
  mscMpanlFramerInterfaceName Link

MscMpanlFramerLinkEntry  
SEQUENCE    
  mscMpanlFramerDataInversion INTEGER
  mscMpanlFramerFrameCrcType INTEGER
  mscMpanlFramerFlagsBetweenFrames Unsigned32

MscMpanlFramerStateEntry  
SEQUENCE    
  mscMpanlFramerAdminState INTEGER
  mscMpanlFramerOperationalState INTEGER
  mscMpanlFramerUsageState INTEGER

MscMpanlFramerStatsEntry  
SEQUENCE    
  mscMpanlFramerFrmToIf Counter32
  mscMpanlFramerFrmFromIf Counter32
  mscMpanlFramerOctetFromIf Counter32
  mscMpanlFramerAborts Counter32
  mscMpanlFramerCrcErrors Counter32
  mscMpanlFramerLrcErrors Counter32
  mscMpanlFramerNonOctetErrors Counter32
  mscMpanlFramerOverruns Counter32
  mscMpanlFramerUnderruns Counter32
  mscMpanlFramerLargeFrmErrors Counter32
  mscMpanlFramerFrmModeErrors Counter32
  mscMpanlFramerFrmToIf64 PassportCounter64
  mscMpanlFramerFrmFromIf64 PassportCounter64
  mscMpanlFramerOctetFromIf64 PassportCounter64

MscMpanlFramerUtilEntry  
SEQUENCE    
  mscMpanlFramerNormPrioLinkUtilToIf Gauge32
  mscMpanlFramerNormPrioLinkUtilFromIf Gauge32

MscMpanlPrefixDnaRowStatusEntry  
SEQUENCE    
  mscMpanlPrefixDnaRowStatus RowStatus
  mscMpanlPrefixDnaComponentName DisplayString
  mscMpanlPrefixDnaStorageType StorageType
  mscMpanlPrefixDnaNumberingPlanIndicatorIndex INTEGER
  mscMpanlPrefixDnaDataNetworkAddressIndex DigitString

MscMpanlDlciRowStatusEntry  
SEQUENCE    
  mscMpanlDlciRowStatus RowStatus
  mscMpanlDlciComponentName DisplayString
  mscMpanlDlciStorageType StorageType
  mscMpanlDlciIndex Integer32

MscMpanlDlciStateEntry  
SEQUENCE    
  mscMpanlDlciAdminState INTEGER
  mscMpanlDlciOperationalState INTEGER
  mscMpanlDlciUsageState INTEGER
  mscMpanlDlciAvailabilityStatus OCTET STRING
  mscMpanlDlciProceduralStatus OCTET STRING
  mscMpanlDlciControlStatus OCTET STRING
  mscMpanlDlciAlarmStatus OCTET STRING
  mscMpanlDlciStandbyStatus INTEGER
  mscMpanlDlciUnknownStatus INTEGER

MscMpanlDlciCalldEntry  
SEQUENCE    
  mscMpanlDlciQ933CallState INTEGER
  mscMpanlDlciQ933CallReference Unsigned32

MscMpanlDlciSpOpEntry  
SEQUENCE    
  mscMpanlDlciMaximumFrameSize Unsigned32
  mscMpanlDlciCommittedBurstSize Unsigned32
  mscMpanlDlciExcessBurstSize Unsigned32
  mscMpanlDlciAccounting INTEGER
  mscMpanlDlciEmissionPriorityToIf INTEGER
  mscMpanlDlciTransferPriToNwk Unsigned32
  mscMpanlDlciTransferPriFromNwk Unsigned32

MscMpanlDlciStatsEntry  
SEQUENCE    
  mscMpanlDlciFrmToIf Unsigned32
  mscMpanlDlciFecnFrmToIf Unsigned32
  mscMpanlDlciBecnFrmToIf Unsigned32
  mscMpanlDlciBciToSubnet Unsigned32
  mscMpanlDlciDeFrmToIf Unsigned32
  mscMpanlDlciDiscCongestedToIf Unsigned32
  mscMpanlDlciDiscDeCongestedToIf Unsigned32
  mscMpanlDlciFrmFromIf Unsigned32
  mscMpanlDlciFecnFrmFromIf Unsigned32
  mscMpanlDlciBecnFrmFromIf Unsigned32
  mscMpanlDlciFciFromSubnet Unsigned32
  mscMpanlDlciBciFromSubnet Unsigned32
  mscMpanlDlciDeFrmFromIf Unsigned32
  mscMpanlDlciExcessFrmFromIf Unsigned32
  mscMpanlDlciDiscExcessFromIf Unsigned32
  mscMpanlDlciDiscFrameAbit Unsigned32
  mscMpanlDlciDiscCongestedFromIf Unsigned32
  mscMpanlDlciDiscDeCongestedFromIf Unsigned32
  mscMpanlDlciErrorShortFrmFromIf Unsigned32
  mscMpanlDlciErrorLongFrmFromIf Unsigned32
  mscMpanlDlciBecnFrmSetByService Unsigned32
  mscMpanlDlciBytesToIf Unsigned32
  mscMpanlDlciDeBytesToIf Unsigned32
  mscMpanlDlciDiscCongestedToIfBytes Unsigned32
  mscMpanlDlciDiscDeCongestedToIfBytes Unsigned32
  mscMpanlDlciBytesFromIf Unsigned32
  mscMpanlDlciDeBytesFromIf Unsigned32
  mscMpanlDlciExcessBytesFromIf Unsigned32
  mscMpanlDlciDiscExcessFromIfBytes Unsigned32
  mscMpanlDlciDiscByteAbit Unsigned32
  mscMpanlDlciDiscCongestedFromIfBytes Unsigned32
  mscMpanlDlciDiscDeCongestedFromIfBytes Unsigned32
  mscMpanlDlciErrorLongBytesFromIf Unsigned32
  mscMpanlDlciTransferPriorityToNetwork INTEGER
  mscMpanlDlciTransferPriorityFromNetwork INTEGER

MscMpanlDlciIntEntry  
SEQUENCE    
  mscMpanlDlciStartTime EnterpriseDateAndTime
  mscMpanlDlciTotalIngressBytes Unsigned64
  mscMpanlDlciTotalEgressBytes Unsigned64
  mscMpanlDlciEirIngressBytes Unsigned64
  mscMpanlDlciEirEgressBytes Unsigned64
  mscMpanlDlciDiscardedBytes Unsigned64
  mscMpanlDlciTotalIngressSegFrm Unsigned32
  mscMpanlDlciTotalEgressSegFrm Unsigned32
  mscMpanlDlciEirIngressSegFrm Unsigned32
  mscMpanlDlciEirEgressSegFrm Unsigned32
  mscMpanlDlciDiscardedSegFrm Unsigned32
  mscMpanlDlciCallReferenceNumber Unsigned32
  mscMpanlDlciElapsedDifference Unsigned32

MscMpanlDlciAbitEntry  
SEQUENCE    
  mscMpanlDlciABitStatusToIf INTEGER
  mscMpanlDlciABitReasonToIf INTEGER
  mscMpanlDlciABitStatusFromIf INTEGER
  mscMpanlDlciABitReasonFromIf INTEGER
  mscMpanlDlciLoopbackState INTEGER

MscMpanlDlciLbRowStatusEntry  
SEQUENCE    
  mscMpanlDlciLbRowStatus RowStatus
  mscMpanlDlciLbComponentName DisplayString
  mscMpanlDlciLbStorageType StorageType
  mscMpanlDlciLbIndex NonReplicated

MscMpanlDlciLbStatsEntry  
SEQUENCE    
  mscMpanlDlciLbLocalTotalFrm Unsigned32
  mscMpanlDlciLbLocalTotalBytes Unsigned32
  mscMpanlDlciLbLocalFecnFrm Unsigned32
  mscMpanlDlciLbLocalBecnFrm Unsigned32
  mscMpanlDlciLbLocalDeFrm Unsigned32
  mscMpanlDlciLbLocalDeBytes Unsigned32
  mscMpanlDlciLbRemoteTotalFrm Unsigned32
  mscMpanlDlciLbRemoteTotalBytes Unsigned32
  mscMpanlDlciLbRemoteFecnFrm Unsigned32
  mscMpanlDlciLbRemoteBecnFrm Unsigned32
  mscMpanlDlciLbRemoteDeFrm Unsigned32
  mscMpanlDlciLbRemoteDeBytes Unsigned32

MscMpanlDlciVcRowStatusEntry  
SEQUENCE    
  mscMpanlDlciVcRowStatus RowStatus
  mscMpanlDlciVcComponentName DisplayString
  mscMpanlDlciVcStorageType StorageType
  mscMpanlDlciVcIndex NonReplicated

MscMpanlDlciVcCadEntry  
SEQUENCE    
  mscMpanlDlciVcType INTEGER
  mscMpanlDlciVcState INTEGER
  mscMpanlDlciVcPreviousState INTEGER
  mscMpanlDlciVcDiagnosticCode Unsigned32
  mscMpanlDlciVcPreviousDiagnosticCode Unsigned32
  mscMpanlDlciVcCalledNpi INTEGER
  mscMpanlDlciVcCalledDna DigitString
  mscMpanlDlciVcCalledLcn Unsigned32
  mscMpanlDlciVcCallingNpi INTEGER
  mscMpanlDlciVcCallingDna DigitString
  mscMpanlDlciVcCallingLcn Unsigned32
  mscMpanlDlciVcAccountingEnabled INTEGER
  mscMpanlDlciVcFastSelectCall INTEGER
  mscMpanlDlciVcPathReliability INTEGER
  mscMpanlDlciVcAccountingEnd INTEGER
  mscMpanlDlciVcPriority INTEGER
  mscMpanlDlciVcSegmentSize Unsigned32
  mscMpanlDlciVcMaxSubnetPktSize Unsigned32
  mscMpanlDlciVcRcosToNetwork INTEGER
  mscMpanlDlciVcRcosFromNetwork INTEGER
  mscMpanlDlciVcEmissionPriorityToNetwork INTEGER
  mscMpanlDlciVcEmissionPriorityFromNetwork INTEGER
  mscMpanlDlciVcDataPath AsciiString

MscMpanlDlciVcIntdEntry  
SEQUENCE    
  mscMpanlDlciVcCallReferenceNumber Hex
  mscMpanlDlciVcElapsedTimeTillNow Unsigned32
  mscMpanlDlciVcSegmentsRx Unsigned32
  mscMpanlDlciVcSegmentsSent Unsigned32
  mscMpanlDlciVcStartTime EnterpriseDateAndTime
  mscMpanlDlciVcCallReferenceNumberDecimal Unsigned32

MscMpanlDlciVcFrdEntry  
SEQUENCE    
  mscMpanlDlciVcFrmCongestedToSubnet Unsigned32
  mscMpanlDlciVcCannotForwardToSubnet Unsigned32
  mscMpanlDlciVcNotDataXferToSubnet Unsigned32
  mscMpanlDlciVcOutOfRangeFrmFromSubnet Unsigned32
  mscMpanlDlciVcCombErrorsFromSubnet Unsigned32
  mscMpanlDlciVcDuplicatesFromSubnet Unsigned32
  mscMpanlDlciVcNotDataXferFromSubnet Unsigned32
  mscMpanlDlciVcFrmLossTimeouts Unsigned32
  mscMpanlDlciVcOoSeqByteCntExceeded Unsigned32
  mscMpanlDlciVcPeakOoSeqPktCount Unsigned32
  mscMpanlDlciVcPeakOoSeqFrmForwarded Unsigned32
  mscMpanlDlciVcSendSequenceNumber Unsigned32
  mscMpanlDlciVcPktRetryTimeouts Unsigned32
  mscMpanlDlciVcPeakRetryQueueSize Unsigned32
  mscMpanlDlciVcSubnetRecoveries Unsigned32
  mscMpanlDlciVcOoSeqPktCntExceeded Unsigned32
  mscMpanlDlciVcPeakOoSeqByteCount Unsigned32

MscMpanlDlciVcDmepEntry  
SEQUENCE    
  mscMpanlDlciVcDmepValue RowPointer

MscMpanlDlciLCoRowStatusEntry  
SEQUENCE    
  mscMpanlDlciLCoRowStatus RowStatus
  mscMpanlDlciLCoComponentName DisplayString
  mscMpanlDlciLCoStorageType StorageType
  mscMpanlDlciLCoIndex NonReplicated

MscMpanlDlciLCoPathDataEntry  
SEQUENCE    
  mscMpanlDlciLCoState INTEGER
  mscMpanlDlciLCoEnd INTEGER
  mscMpanlDlciLCoCostMetric Unsigned32
  mscMpanlDlciLCoDelayMetric Unsigned32
  mscMpanlDlciLCoRoundTripDelay Unsigned32
  mscMpanlDlciLCoSetupPriority Unsigned32
  mscMpanlDlciLCoHoldingPriority Unsigned32
  mscMpanlDlciLCoRequiredTxBandwidth Gauge32
  mscMpanlDlciLCoRequiredRxBandwidth Gauge32
  mscMpanlDlciLCoRequiredTrafficType INTEGER
  mscMpanlDlciLCoPermittedTrunkTypes OCTET STRING
  mscMpanlDlciLCoRequiredSecurity Unsigned32
  mscMpanlDlciLCoRequiredCustomerParameter Unsigned32
  mscMpanlDlciLCoEmissionPriority Unsigned32
  mscMpanlDlciLCoDiscardPriority Unsigned32
  mscMpanlDlciLCoRetryCount Unsigned32
  mscMpanlDlciLCoPathFailureCount Unsigned32
  mscMpanlDlciLCoReasonForNoRoute INTEGER
  mscMpanlDlciLCoLastTearDownReason INTEGER
  mscMpanlDlciLCoPathFailureAction INTEGER
  mscMpanlDlciLCoBumpPreference INTEGER
  mscMpanlDlciLCoOptimization INTEGER
  mscMpanlDlciLCoPathUpDateTime EnterpriseDateAndTime

MscMpanlDlciLCoStatsEntry  
SEQUENCE    
  mscMpanlDlciLCoPktsToNetwork PassportCounter64
  mscMpanlDlciLCoBytesToNetwork PassportCounter64
  mscMpanlDlciLCoPktsFromNetwork PassportCounter64
  mscMpanlDlciLCoBytesFromNetwork PassportCounter64

MscMpanlDlciLCoCallDataEntry  
SEQUENCE    
  mscMpanlDlciLCoCallingNpi INTEGER
  mscMpanlDlciLCoCallingDna DigitString
  mscMpanlDlciLCoElapsedTimeTillNow Unsigned32
  mscMpanlDlciLCoCallReferenceNumber Hex
  mscMpanlDlciLCoCalledNpi INTEGER
  mscMpanlDlciLCoCalledDna DigitString

MscMpanlDlciLCoPathEntry  
SEQUENCE    
  mscMpanlDlciLCoPathValue AsciiString

MscMpanlDlciJvcRowStatusEntry  
SEQUENCE    
  mscMpanlDlciJvcRowStatus RowStatus
  mscMpanlDlciJvcComponentName DisplayString
  mscMpanlDlciJvcStorageType StorageType
  mscMpanlDlciJvcIndex NonReplicated

MscMpanlDlciJvcOperEntry  
SEQUENCE    
  mscMpanlDlciJvcCurrentState INTEGER
  mscMpanlDlciJvcPreviousState INTEGER
  mscMpanlDlciJvcCallingNpi INTEGER
  mscMpanlDlciJvcCallingAddress DigitString
  mscMpanlDlciJvcCallingLcn Unsigned32
  mscMpanlDlciJvcCalledNpi INTEGER
  mscMpanlDlciJvcCalledAddress DigitString
  mscMpanlDlciJvcCalledLcn Unsigned32

MscMpanlDlciJvcStatEntry  
SEQUENCE    
  mscMpanlDlciJvcPacketsFromSubnet Unsigned32
  mscMpanlDlciJvcPacketsToSubnet Unsigned32
  mscMpanlDlciJvcPacketsDiscarded Unsigned32
  mscMpanlDlciJvcProtocolErrors Unsigned32

MscMpanlSigRowStatusEntry  
SEQUENCE    
  mscMpanlSigRowStatus RowStatus
  mscMpanlSigComponentName DisplayString
  mscMpanlSigStorageType StorageType
  mscMpanlSigIndex NonReplicated

MscMpanlSigSysParmsEntry  
SEQUENCE    
  mscMpanlSigCallSetupTimer Unsigned32
  mscMpanlSigDisconnectTimer Unsigned32
  mscMpanlSigReleaseTimer Unsigned32
  mscMpanlSigCallProceedingTimer Unsigned32
  mscMpanlSigNetworkType INTEGER

MscMpanlSigLapfSysEntry  
SEQUENCE    
  mscMpanlSigWindowSize Unsigned32
  mscMpanlSigRetransmitLimit Unsigned32
  mscMpanlSigAckTimer Unsigned32
  mscMpanlSigAckDelayTimer Unsigned32
  mscMpanlSigIdleProbeTimer Unsigned32

MscMpanlSigSvcaccEntry  
SEQUENCE    
  mscMpanlSigDefaultAccounting INTEGER

MscMpanlSigStateEntry  
SEQUENCE    
  mscMpanlSigAdminState INTEGER
  mscMpanlSigOperationalState INTEGER
  mscMpanlSigUsageState INTEGER

MscMpanlSigStatsEntry  
SEQUENCE    
  mscMpanlSigCurrentNumberOfSvcCalls Unsigned32
  mscMpanlSigInCalls Counter32
  mscMpanlSigInCallsRefused Counter32
  mscMpanlSigOutCalls Counter32
  mscMpanlSigOutCallsFailed Counter32
  mscMpanlSigProtocolErrors Counter32
  mscMpanlSigQualityOfServiceNotAvailable Counter32
  mscMpanlSigSetupTimeout Counter32
  mscMpanlSigLastCauseInStatusMsgReceived Unsigned32
  mscMpanlSigLastStateInStatusMsgReceived INTEGER
  mscMpanlSigLastDlciReceivedStatus Unsigned32
  mscMpanlSigLastQ933StateReceivedStatus INTEGER
  mscMpanlSigLastTimeMsgBlockCongested EnterpriseDateAndTime
  mscMpanlSigLastDlciWithMsgBlockCongestion Unsigned32

MscMpanlSigLapfStatusEntry  
SEQUENCE    
  mscMpanlSigCurrentState INTEGER
  mscMpanlSigLastStateChangeReason INTEGER
  mscMpanlSigFrmrReceive HexString
  mscMpanlSigCurrentQueueSize Counter32

MscMpanlSigLapfStatsEntry  
SEQUENCE    
  mscMpanlSigStateChange Counter32
  mscMpanlSigRemoteBusy Counter32
  mscMpanlSigReceiveRejectFrame Counter32
  mscMpanlSigAckTimeout Counter32
  mscMpanlSigIFramesTransmitted Counter32
  mscMpanlSigIFramesTxDiscarded Counter32
  mscMpanlSigIFramesReceived Counter32
  mscMpanlSigIFramesRcvdDiscarded Counter32

MscMpanlSigMpanlRowStatusEntry  
SEQUENCE    
  mscMpanlSigMpanlRowStatus RowStatus
  mscMpanlSigMpanlComponentName DisplayString
  mscMpanlSigMpanlStorageType StorageType
  mscMpanlSigMpanlIndex NonReplicated

MscMpanlSigMpanlStateEntry  
SEQUENCE    
  mscMpanlSigMpanlAdminState INTEGER
  mscMpanlSigMpanlOperationalState INTEGER
  mscMpanlSigMpanlUsageState INTEGER

MscMpanlSigMpanlProfileEntry  
SEQUENCE    
  mscMpanlSigMpanlDteCustomerId Unsigned32
  mscMpanlSigMpanlDteNodeId Unsigned32
  mscMpanlSigMpanlDteComponentName AsciiString
  mscMpanlSigMpanlHighestDlci Unsigned32

MscMpanlSigMpanlStatsEntry  
SEQUENCE    
  mscMpanlSigMpanlProtocolErrors Counter32
  mscMpanlSigMpanlSap0CommandsRx Counter32
  mscMpanlSigMpanlSap0CommandsTx Counter32
  mscMpanlSigMpanlSapXCommandsRx Counter32
  mscMpanlSigMpanlSapXCommandsTx Counter32

MscMpanlSigMpanlLapfStatusEntry  
SEQUENCE    
  mscMpanlSigMpanlCurrentState INTEGER
  mscMpanlSigMpanlLastStateChangeReason INTEGER
  mscMpanlSigMpanlFrmrReceive HexString
  mscMpanlSigMpanlCurrentQueueSize Counter32

MscMpanlSigMpanlLapfStatsEntry  
SEQUENCE    
  mscMpanlSigMpanlStateChange Counter32
  mscMpanlSigMpanlRemoteBusy Counter32
  mscMpanlSigMpanlReceiveRejectFrame Counter32
  mscMpanlSigMpanlAckTimeout Counter32
  mscMpanlSigMpanlIFramesTransmitted Counter32
  mscMpanlSigMpanlIFramesTxDiscarded Counter32
  mscMpanlSigMpanlIFramesReceived Counter32
  mscMpanlSigMpanlIFramesRcvdDiscarded Counter32

MscMpanlLmiRowStatusEntry  
SEQUENCE    
  mscMpanlLmiRowStatus RowStatus
  mscMpanlLmiComponentName DisplayString
  mscMpanlLmiStorageType StorageType
  mscMpanlLmiIndex NonReplicated

MscMpanlLmiParmsEntry  
SEQUENCE    
  mscMpanlLmiProcedures INTEGER

MscMpanlLmiStateEntry  
SEQUENCE    
  mscMpanlLmiAdminState INTEGER
  mscMpanlLmiOperationalState INTEGER
  mscMpanlLmiUsageState INTEGER

MscMpanlVoFrRowStatusEntry  
SEQUENCE    
  mscMpanlVoFrRowStatus RowStatus
  mscMpanlVoFrComponentName DisplayString
  mscMpanlVoFrStorageType StorageType
  mscMpanlVoFrIndex NonReplicated

MscMpanlVoFrOperEntry  
SEQUENCE    
  mscMpanlVoFrMaximumFrameSize Counter32
  mscMpanlVoFrTransmitInformationRate Counter32

MscMpanlVoFrStatsEntry  
SEQUENCE    
  mscMpanlVoFrFragmentedHighestPriorityFrames Counter32
  mscMpanlVoFrLostFragmentsFromIf Counter32
  mscMpanlVoFrProtocolViolationsFromIf Counter32

MscMpanlFrMuxSetupRowStatusEntry  
SEQUENCE    
  mscMpanlFrMuxSetupRowStatus RowStatus
  mscMpanlFrMuxSetupComponentName DisplayString
  mscMpanlFrMuxSetupStorageType StorageType
  mscMpanlFrMuxSetupIndex NonReplicated

MscMpanlFrMuxSetupOpEntry  
SEQUENCE    
  mscMpanlFrMuxSetupCommittedInformationRate Unsigned32
  mscMpanlFrMuxSetupDlciCompName RowPointer

MscMpanlFrMuxSetupPvcSetupRowStatusEntry  
SEQUENCE    
  mscMpanlFrMuxSetupPvcSetupRowStatus RowStatus
  mscMpanlFrMuxSetupPvcSetupComponentName DisplayString
  mscMpanlFrMuxSetupPvcSetupStorageType StorageType
  mscMpanlFrMuxSetupPvcSetupIndex NonReplicated

MscMpanlFrMuxSetupPvcSetupProvEntry  
SEQUENCE    
  mscMpanlFrMuxSetupPvcSetupDlciName Link

MscMpanlIsdnRowStatusEntry  
SEQUENCE    
  mscMpanlIsdnRowStatus RowStatus
  mscMpanlIsdnComponentName DisplayString
  mscMpanlIsdnStorageType StorageType
  mscMpanlIsdnIndex NonReplicated

MscMpanlIsdnProvEntry  
SEQUENCE    
  mscMpanlIsdnT320 Unsigned32
  mscMpanlIsdnAddressSignalling INTEGER

MscMpanlIsdnOperEntry  
SEQUENCE    
  mscMpanlIsdnDataSigChan INTEGER
  mscMpanlIsdnBChannelState INTEGER
  mscMpanlIsdnLastUsedCgpn DigitString
  mscMpanlIsdnBChanIntState INTEGER
  mscMpanlIsdnActiveVirtualCircuitsCount Counter32

Defined Values

mpaNetworkLinkMIB 1.1.562.36.2.2.119
OBJECT IDENTIFIER    

mscMpanl 1.1.562.36.2.1.123
OBJECT IDENTIFIER    

mscMpanlRowStatusTable 1.1.562.36.2.1.123.1
This entry controls the addition and deletion of mscMpanl components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlRowStatusEntry

mscMpanlRowStatusEntry 1.1.562.36.2.1.123.1.1
A single entry in the table represents a single mscMpanl component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlRowStatusEntry  

mscMpanlRowStatus 1.1.562.36.2.1.123.1.1.1
This variable is used as the basis for SNMP naming of mscMpanl components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscMpanlComponentName 1.1.562.36.2.1.123.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlStorageType 1.1.562.36.2.1.123.1.1.4
This variable represents the storage type value for the mscMpanl tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlIndex 1.1.562.36.2.1.123.1.1.10
This variable represents the index for the mscMpanl tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

mscMpanlCidDataTable 1.1.562.36.2.1.123.10
This group contains the attribute for the MPANL component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlCidDataEntry

mscMpanlCidDataEntry 1.1.562.36.2.1.123.10.1
An entry in the mscMpanlCidDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlCidDataEntry  

mscMpanlCustomerIdentifier 1.1.562.36.2.1.123.10.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscMpanlProvTable 1.1.562.36.2.1.123.12
This group contains provisionable attributes of the MPANL service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlProvEntry

mscMpanlProvEntry 1.1.562.36.2.1.123.12.1
An entry in the mscMpanlProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlProvEntry  

mscMpanlCommentText 1.1.562.36.2.1.123.12.1.1
This attribute specifies the name the customer wishes to associate with this MPANL interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(0..40)  

mscMpanlEmissionPriorityQsTable 1.1.562.36.2.1.123.13
This group contains the provisionable attribute to specifie the number of Frame Relay egress emission priority queues to be used on that Frame Relay Interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlEmissionPriorityQsEntry

mscMpanlEmissionPriorityQsEntry 1.1.562.36.2.1.123.13.1
An entry in the mscMpanlEmissionPriorityQsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlEmissionPriorityQsEntry  

mscMpanlNumberOfEmissionQs 1.1.562.36.2.1.123.13.1.1
This attribute specifies the number of egress emission priority queues that will be used for that Frame Relay interface. The possible values of this attribute are 2 or 4: For V.35, V.11, HSSI, E1, DS1, E3, DS3 or 8pDS1 the possible values are: 2 (in which case they are hardware queues), or 4 (in which case they are software queues). For DS1C, E1C or DS3C the possible values are 2, 4 (in all cases they are software queues).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 2 | 4  

mscMpanlStateTable 1.1.562.36.2.1.123.14
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlStateEntry

mscMpanlStateEntry 1.1.562.36.2.1.123.14.1
An entry in the mscMpanlStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlStateEntry  

mscMpanlAdminState 1.1.562.36.2.1.123.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscMpanlOperationalState 1.1.562.36.2.1.123.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscMpanlUsageState 1.1.562.36.2.1.123.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscMpanlAvailabilityStatus 1.1.562.36.2.1.123.14.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

mscMpanlProceduralStatus 1.1.562.36.2.1.123.14.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscMpanlControlStatus 1.1.562.36.2.1.123.14.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscMpanlAlarmStatus 1.1.562.36.2.1.123.14.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscMpanlStandbyStatus 1.1.562.36.2.1.123.14.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscMpanlUnknownStatus 1.1.562.36.2.1.123.14.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscMpanlStatsTable 1.1.562.36.2.1.123.16
FrUni/n Statistics This group contains the statistics about the operational behavior of the service at the interface level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlStatsEntry

mscMpanlStatsEntry 1.1.562.36.2.1.123.16.1
An entry in the mscMpanlStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlStatsEntry  

mscMpanlLastUnknownDlci 1.1.562.36.2.1.123.16.1.1
This attribute identifies the most recent DLCI which user frames were received on for which a DLCI has not been provisioned on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1023  

mscMpanlUnknownDlciFramesFromIf 1.1.562.36.2.1.123.16.1.2
This attribute contains a count of the number of frames received from the interface with an unknown DLCI (DLCI which is not provisioned). When the maximum is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlInvalidHeaderFramesFromIf 1.1.562.36.2.1.123.16.1.3
This attribute counts the number of frames received from the interface with an invalid header format. When the maximum is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlTrafficStatsTable 1.1.562.36.2.1.123.17
This operational group provides the traffic statistics of the service at the interface level. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlTrafficStatsEntry

mscMpanlTrafficStatsEntry 1.1.562.36.2.1.123.17.1
An entry in the mscMpanlTrafficStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlTrafficStatsEntry  

mscMpanlFrmToIf 1.1.562.36.2.1.123.17.1.1
This attribute counts frames transmitted to the interface. This count may differ from its framer couterpart because Voice over Frame Relay function may fragment and pack the Frame Relay frames before transmission. When the maximum is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlOctetToIf 1.1.562.36.2.1.123.17.1.2
This attribute counts octets transmitted to the interface. This count may differ from its framer couterpart because Voice over Frame Relay function may fragment and pack the Frame Relay frames before transmission. When the maximum is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlFrmFromIf 1.1.562.36.2.1.123.17.1.3
This attribute counts frames received from the interface. This count may differ from its framer couterpart because Voice over Frame Relay function may fragment and pack the Frame Relay frames before transmission. When the maximum is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlOctetFromIf 1.1.562.36.2.1.123.17.1.4
This attribute counts octets received from the interface. This count may differ from its framer couterpart because Voice over Frame Relay function may fragment and pack the Frame Relay frames before transmission. When the maximum is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlIfEntryTable 1.1.562.36.2.1.123.23
This group contains the provisionable attributes for the ifEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlIfEntryEntry

mscMpanlIfEntryEntry 1.1.562.36.2.1.123.23.1
An entry in the mscMpanlIfEntryTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlIfEntryEntry  

mscMpanlIfAdminStatus 1.1.562.36.2.1.123.23.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscMpanlIfIndex 1.1.562.36.2.1.123.23.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscMpanlOperStatusTable 1.1.562.36.2.1.123.24
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlOperStatusEntry

mscMpanlOperStatusEntry 1.1.562.36.2.1.123.24.1
An entry in the mscMpanlOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlOperStatusEntry  

mscMpanlSnmpOperStatus 1.1.562.36.2.1.123.24.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscMpanlOperTable 1.1.562.36.2.1.123.25
This group contains miscelleneous operational attributes of the MPANL service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlOperEntry

mscMpanlOperEntry 1.1.562.36.2.1.123.25.1
An entry in the mscMpanlOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlOperEntry  

mscMpanlRoundTripDelay 1.1.562.36.2.1.123.25.1.1
This attribute indicates the round trip delay of the MPANL interface. The round trip delay measurement is only made when this attribute is displayed. The measured value is rounded up to the next millisecond. This attribute has the value 0, if the delay measurement cannot be made.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10000  

mscMpanlFrmToIfByQueueTable 1.1.562.36.2.1.123.350
This attribute counts the total number of frames transmitted to the interface per egress emission priority queue since the component has been activated. There is potentially a maximum of 4 emission priority queues. The number of available egress queues varies according to the value of the provisionable attribute numberOfEmissionQs. Egress queue 0 has the lowest priority, while egress queue 3 has the highest priority.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlFrmToIfByQueueEntry

mscMpanlFrmToIfByQueueEntry 1.1.562.36.2.1.123.350.1
An entry in the mscMpanlFrmToIfByQueueTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlFrmToIfByQueueEntry  

mscMpanlFrmToIfByQueueIndex 1.1.562.36.2.1.123.350.1.1
This variable represents the index for the mscMpanlFrmToIfByQueueTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

mscMpanlFrmToIfByQueueValue 1.1.562.36.2.1.123.350.1.2
This variable represents an individual value for the mscMpanlFrmToIfByQueueTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlOctetToIfByQueueTable 1.1.562.36.2.1.123.351
This attribute counts the total number of octets transmitted from the service to the interface per emission priority queue since the component has been activated. There is potentially a maximum of 4 emission priority queues. The number of available egress queues varies according to the value of the provisionable attribute numberOfEmissionQs. Egress queue 0 has the lowest priority, while egress queue 3 has the highest priority.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlOctetToIfByQueueEntry

mscMpanlOctetToIfByQueueEntry 1.1.562.36.2.1.123.351.1
An entry in the mscMpanlOctetToIfByQueueTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlOctetToIfByQueueEntry  

mscMpanlOctetToIfByQueueIndex 1.1.562.36.2.1.123.351.1.1
This variable represents the index for the mscMpanlOctetToIfByQueueTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

mscMpanlOctetToIfByQueueValue 1.1.562.36.2.1.123.351.1.2
This variable represents an individual value for the mscMpanlOctetToIfByQueueTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDna 1.1.562.36.2.1.123.2
OBJECT IDENTIFIER    

mscMpanlDnaRowStatusTable 1.1.562.36.2.1.123.2.1
This entry controls the addition and deletion of mscMpanlDna components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDnaRowStatusEntry

mscMpanlDnaRowStatusEntry 1.1.562.36.2.1.123.2.1.1
A single entry in the table represents a single mscMpanlDna component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDnaRowStatusEntry  

mscMpanlDnaRowStatus 1.1.562.36.2.1.123.2.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlDna components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMpanlDnaComponentName 1.1.562.36.2.1.123.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlDnaStorageType 1.1.562.36.2.1.123.2.1.1.4
This variable represents the storage type value for the mscMpanlDna tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlDnaIndex 1.1.562.36.2.1.123.2.1.1.10
This variable represents the index for the mscMpanlDna tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlDnaOutgoingOptionsTable 1.1.562.36.2.1.123.2.11
DnaOutOptionsProv group defines call options of a Dna for calls which are made out of the interface represented by Dna. All these options are not used for calls arriving to the interface represented by Dna.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDnaOutgoingOptionsEntry

mscMpanlDnaOutgoingOptionsEntry 1.1.562.36.2.1.123.2.11.1
An entry in the mscMpanlDnaOutgoingOptionsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDnaOutgoingOptionsEntry  

mscMpanlDnaDefaultTransferPriority 1.1.562.36.2.1.123.2.11.1.18
This attribute specifies the default transfer priority to network for all outgoing calls using this particular Dna. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 levels from 0 to 15. Each transfer priority n, where n indicates the transfer priority index, contains a default setting for routing class of service (multimedia, delay or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned in the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required. The default defaultTransferPriority is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15)  

mscMpanlDnaCallOptionsTable 1.1.562.36.2.1.123.2.13
DnaCallOptions group defines additional options for calls not related directly to direction of a call.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDnaCallOptionsEntry

mscMpanlDnaCallOptionsEntry 1.1.562.36.2.1.123.2.13.1
An entry in the mscMpanlDnaCallOptionsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDnaCallOptionsEntry  

mscMpanlDnaAccountClass 1.1.562.36.2.1.123.2.13.1.10
This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accounting record in the local and remote service type attributes. Use of this attribute is decided by network operator. This attribute is returned by the local VC in the accounting record for all calls setup using this particular DNA.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mscMpanlDnaAccountCollection 1.1.562.36.2.1.123.2.13.1.11
This set attribute indicates that accounting records are to be collected by the network for the various reasons: billing, test, study, auditing. The last of the parameters, force, indicates that accounting records are to be collected irrespective of other collection reasons. The force option is available for X.75 Gateways only. If none of these reasons are set, then accounting will be suppressed. To set a specific accounting collection reason, the reason is entered and the corresponding bit in the structure is set to a value of 1. To turn off a specific accounting collection reason, the reason is entered preceeded with the '^' character, and the corresponding bit in the structure is set to a value of 0. The bit placement for the accounting collection reasons is as follows: Bit 0 - Bill Bit 1 - Test Bit 2 - Study Bit 3 - Audit Bit 4 - Force Description of bits: bill(0) test(1) study(2) audit(3) force(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscMpanlDnaServiceExchange 1.1.562.36.2.1.123.2.13.1.12
This attribute is an arbitrary number, Data Service Exchange, as entered by the network operator and reported in accounting record. It is converted into an internal 8-bit integer value for use in the accounting record as well as in various X.25 and X.75 Tariff utilities.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mscMpanlDnaEgressAccounting 1.1.562.36.2.1.123.2.13.1.13
This attribute specifies if Egress accounting is enabled by the MPANL service. Disabling of Egress accounting means that only segment counts are collected by VC and there are no frame relay counts in accounting records for the MPANL service. Enabling of Egress accounting means that the accounting records for MPANL contain frame relay specific counts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscMpanlFramer 1.1.562.36.2.1.123.3
OBJECT IDENTIFIER    

mscMpanlFramerRowStatusTable 1.1.562.36.2.1.123.3.1
This entry controls the addition and deletion of mscMpanlFramer components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlFramerRowStatusEntry

mscMpanlFramerRowStatusEntry 1.1.562.36.2.1.123.3.1.1
A single entry in the table represents a single mscMpanlFramer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlFramerRowStatusEntry  

mscMpanlFramerRowStatus 1.1.562.36.2.1.123.3.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlFramer components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscMpanlFramerComponentName 1.1.562.36.2.1.123.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlFramerStorageType 1.1.562.36.2.1.123.3.1.1.4
This variable represents the storage type value for the mscMpanlFramer tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlFramerIndex 1.1.562.36.2.1.123.3.1.1.10
This variable represents the index for the mscMpanlFramer tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlFramerProvTable 1.1.562.36.2.1.123.3.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlFramerProvEntry

mscMpanlFramerProvEntry 1.1.562.36.2.1.123.3.10.1
An entry in the mscMpanlFramerProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlFramerProvEntry  

mscMpanlFramerInterfaceName 1.1.562.36.2.1.123.3.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

mscMpanlFramerLinkTable 1.1.562.36.2.1.123.3.11
This group contains attributes defining the framing of data on the link interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlFramerLinkEntry

mscMpanlFramerLinkEntry 1.1.562.36.2.1.123.3.11.1
An entry in the mscMpanlFramerLinkTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlFramerLinkEntry  

mscMpanlFramerDataInversion 1.1.562.36.2.1.123.3.11.1.2
This attribute determines whether data bits are to be inverted (1 to 0 and 0 to 1) before transmission of frames to the interface. If the value of this attribute is On, the incoming data bits will also be inverted when frames are received from the link before being processed. This option is typically used in hdlc framing mode when inversion is used to guarantee 1's density. Note that aborts (in hdlc and interrupting modes) are corrupted when data is inverted. This attribute may only take its default value for non-MSA cards.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(16)  

mscMpanlFramerFrameCrcType 1.1.562.36.2.1.123.3.11.1.3
This attribute defines the type of CRC used. The CRC value calculated is appended to the end of the frames transmitted to the link. The CRC value is removed from the end of frames received from the link and checked for correctness. NoCrc means that CRC is not used. This attribute may take only its default value for non-MSA cards.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER crc16(0), crc32(1), noCrc(2)  

mscMpanlFramerFlagsBetweenFrames 1.1.562.36.2.1.123.3.11.1.4
This attribute defines the number of flags that are inserted between frames sent to the link interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..16  

mscMpanlFramerStateTable 1.1.562.36.2.1.123.3.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlFramerStateEntry

mscMpanlFramerStateEntry 1.1.562.36.2.1.123.3.12.1
An entry in the mscMpanlFramerStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlFramerStateEntry  

mscMpanlFramerAdminState 1.1.562.36.2.1.123.3.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscMpanlFramerOperationalState 1.1.562.36.2.1.123.3.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscMpanlFramerUsageState 1.1.562.36.2.1.123.3.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscMpanlFramerStatsTable 1.1.562.36.2.1.123.3.13
This group contains the operational statistics data for a Framer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlFramerStatsEntry

mscMpanlFramerStatsEntry 1.1.562.36.2.1.123.3.13.1
An entry in the mscMpanlFramerStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlFramerStatsEntry  

mscMpanlFramerFrmToIf 1.1.562.36.2.1.123.3.13.1.1
The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlFramerFrmFromIf 1.1.562.36.2.1.123.3.13.1.2
The number of frames received from the link interface by Framer.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlFramerOctetFromIf 1.1.562.36.2.1.123.3.13.1.3
The number of bytes received from the link interface by Framer.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlFramerAborts 1.1.562.36.2.1.123.3.13.1.4
This attribute is the total number of aborts received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlFramerCrcErrors 1.1.562.36.2.1.123.3.13.1.5
This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlFramerLrcErrors 1.1.562.36.2.1.123.3.13.1.6
This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlFramerNonOctetErrors 1.1.562.36.2.1.123.3.13.1.7
This attribute is the total number of frames that were non octet aligned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlFramerOverruns 1.1.562.36.2.1.123.3.13.1.8
This attribute is the total number of frames received from the link for which overruns occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlFramerUnderruns 1.1.562.36.2.1.123.3.13.1.9
This attribute is the total number of frames transmitted to the link for which underruns occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlFramerLargeFrmErrors 1.1.562.36.2.1.123.3.13.1.10
This attribute is the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contained more than the 255 block hardware limit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlFramerFrmModeErrors 1.1.562.36.2.1.123.3.13.1.11
This attribute is the total number of frames detected with framing mode errors. A framingModeError is flagged when frames are inconsistent with the specified framingType, that is when interrupting frames are used while running in hdlc mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlFramerFrmToIf64 1.1.562.36.2.1.123.3.13.1.14
The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscMpanlFramerFrmFromIf64 1.1.562.36.2.1.123.3.13.1.15
The number of frames received from the link interface by Framer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscMpanlFramerOctetFromIf64 1.1.562.36.2.1.123.3.13.1.16
The number of bytes received from the link interface by Framer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscMpanlFramerUtilTable 1.1.562.36.2.1.123.3.14
This group contains the link utilizaiton operational data for a Framer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlFramerUtilEntry

mscMpanlFramerUtilEntry 1.1.562.36.2.1.123.3.14.1
An entry in the mscMpanlFramerUtilTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlFramerUtilEntry  

mscMpanlFramerNormPrioLinkUtilToIf 1.1.562.36.2.1.123.3.14.1.1
This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwidth on the link. Note that this indluces traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

mscMpanlFramerNormPrioLinkUtilFromIf 1.1.562.36.2.1.123.3.14.1.3
This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

mscMpanlPrefixDna 1.1.562.36.2.1.123.4
OBJECT IDENTIFIER    

mscMpanlPrefixDnaRowStatusTable 1.1.562.36.2.1.123.4.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscMpanlPrefixDna components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlPrefixDnaRowStatusEntry

mscMpanlPrefixDnaRowStatusEntry 1.1.562.36.2.1.123.4.1.1
A single entry in the table represents a single mscMpanlPrefixDna component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlPrefixDnaRowStatusEntry  

mscMpanlPrefixDnaRowStatus 1.1.562.36.2.1.123.4.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlPrefixDna components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMpanlPrefixDnaComponentName 1.1.562.36.2.1.123.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlPrefixDnaStorageType 1.1.562.36.2.1.123.4.1.1.4
This variable represents the storage type value for the mscMpanlPrefixDna tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlPrefixDnaNumberingPlanIndicatorIndex 1.1.562.36.2.1.123.4.1.1.10
This variable represents an index for the mscMpanlPrefixDna tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscMpanlPrefixDnaDataNetworkAddressIndex 1.1.562.36.2.1.123.4.1.1.11
This variable represents an index for the mscMpanlPrefixDna tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DigitString Size(1..15)  

mscMpanlDlci 1.1.562.36.2.1.123.5
OBJECT IDENTIFIER    

mscMpanlDlciRowStatusTable 1.1.562.36.2.1.123.5.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscMpanlDlci components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciRowStatusEntry

mscMpanlDlciRowStatusEntry 1.1.562.36.2.1.123.5.1.1
A single entry in the table represents a single mscMpanlDlci component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciRowStatusEntry  

mscMpanlDlciRowStatus 1.1.562.36.2.1.123.5.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlDlci components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMpanlDlciComponentName 1.1.562.36.2.1.123.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlDlciStorageType 1.1.562.36.2.1.123.5.1.1.4
This variable represents the storage type value for the mscMpanlDlci tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlDlciIndex 1.1.562.36.2.1.123.5.1.1.10
This variable represents the index for the mscMpanlDlci tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 17..1007  

mscMpanlDlciStateTable 1.1.562.36.2.1.123.5.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciStateEntry

mscMpanlDlciStateEntry 1.1.562.36.2.1.123.5.10.1
An entry in the mscMpanlDlciStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciStateEntry  

mscMpanlDlciAdminState 1.1.562.36.2.1.123.5.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscMpanlDlciOperationalState 1.1.562.36.2.1.123.5.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscMpanlDlciUsageState 1.1.562.36.2.1.123.5.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscMpanlDlciAvailabilityStatus 1.1.562.36.2.1.123.5.10.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

mscMpanlDlciProceduralStatus 1.1.562.36.2.1.123.5.10.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscMpanlDlciControlStatus 1.1.562.36.2.1.123.5.10.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscMpanlDlciAlarmStatus 1.1.562.36.2.1.123.5.10.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscMpanlDlciStandbyStatus 1.1.562.36.2.1.123.5.10.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscMpanlDlciUnknownStatus 1.1.562.36.2.1.123.5.10.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscMpanlDlciCalldTable 1.1.562.36.2.1.123.5.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes describes the characteristics of the call such as call type and call state.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciCalldEntry

mscMpanlDlciCalldEntry 1.1.562.36.2.1.123.5.11.1
An entry in the mscMpanlDlciCalldTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciCalldEntry  

mscMpanlDlciQ933CallState 1.1.562.36.2.1.123.5.11.1.2
This attribute indicates the Q.933 state of an SVC call. In the description that follows, 'local' refers to the user who has initiated the SETUP request, and 'remote' refers to the user to whom the local user wishes to connect. State description: In the null state, the network has neither received nor sent call setup requests for this DLCI. In the callInitiated state, the network has received a SETUP message from the local user. In the outgoingCallProceeding state, the network has sent a CALL PROCEEDING message to the local user in response to the SETUP message. In the callPresent state, the network has sent a SETUP message to the remote user. In the incomingCallProceeding state, the network has received a CALL PROCEEDING message from the remote user in response to a SETUP message. In the active state, either the network has sent a CONNECT message to the local user, or the network has received a CONNECT from the remote user. In the disconnectRequest state, the network has received a DISCONNECT message from the local user. In the disconnectIndication state, the network has sent a DISCONNECT to the local user. In the releaseRequest state, the network has sent out a RELEASE message to the local user. The notApplicable state indicates that this attribute is meaningless because the DLCI is a PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null(0), callInitiated(1), outgoingCallProceeding(3), callPresent(6), incomingCallProceeding(9), active(10), disconnectRequest(11), disconnectIndication(12), releaseRequest(19), notApplicable(20)  

mscMpanlDlciQ933CallReference 1.1.562.36.2.1.123.5.11.1.3
This attribute indicates the Q.933 call reference number associated with this DLCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..32767  

mscMpanlDlciSpOpTable 1.1.562.36.2.1.123.5.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the service parameters specific to this instance of Dlci.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciSpOpEntry

mscMpanlDlciSpOpEntry 1.1.562.36.2.1.123.5.12.1
An entry in the mscMpanlDlciSpOpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciSpOpEntry  

mscMpanlDlciMaximumFrameSize 1.1.562.36.2.1.123.5.12.1.1
This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in this definition. This attribute corresponds to the dN1 parameter described in the Frame Relay Vendor Forum Specification.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4096  

mscMpanlDlciCommittedBurstSize 1.1.562.36.2.1.123.5.12.1.4
This attribute indicates the committed burst size (Bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measurement interval (t). Data marked DE=1 is not accounted for in Bc. This attribute should be ignored when rateEnforcement is off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..50000000  

mscMpanlDlciExcessBurstSize 1.1.562.36.2.1.123.5.12.1.5
This attribute indicates the excess burst size (Be) in bits. Be is the amount of uncommitted data that the network will attempt to deliver over measurement interval T. Data marked DE=1 by the user or by the network is accounted for here. This attribute should be ignored when rateEnforcement is off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..50000000  

mscMpanlDlciAccounting 1.1.562.36.2.1.123.5.12.1.8
This attribute indicates whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generation to be occur, the accountingOn attribute must be on and at least one of the accountCollection options in the DataNetworkAddress component must be selected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscMpanlDlciEmissionPriorityToIf 1.1.562.36.2.1.123.5.12.1.9
This attribute indicates the emission priority of frames sent to the interface. A larger value denotes a higher priority.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 1 | 2 | 3  

mscMpanlDlciTransferPriToNwk 1.1.562.36.2.1.123.5.12.1.10
This attribute indicates the priority at which data is transferred to the network. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 indices from 0 to 15. Each transfer priority n, where n specifies the transfer priority index, contains a default setting for routing class of service (multimedia, delay or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned in the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..15  

mscMpanlDlciTransferPriFromNwk 1.1.562.36.2.1.123.5.12.1.11
This attribute indicates the priority at which data is transferred from the network. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 indices from 0 to 15. Each transfer priority n, where n specifies the transfer priority index, contains a default setting for routing class of service (multimedia, delay or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned in the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..15  

mscMpanlDlciStatsTable 1.1.562.36.2.1.123.5.13
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics for the MPANL Data Link Connection Identifier.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciStatsEntry

mscMpanlDlciStatsEntry 1.1.562.36.2.1.123.5.13.1
An entry in the mscMpanlDlciStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciStatsEntry  

mscMpanlDlciFrmToIf 1.1.562.36.2.1.123.5.13.1.1
This attribute counts the frames sent out the interface. When the maximum count is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciFecnFrmToIf 1.1.562.36.2.1.123.5.13.1.2
This attribute counts the frames sent to the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciBecnFrmToIf 1.1.562.36.2.1.123.5.13.1.3
This attribute counts the frames sent to the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciBciToSubnet 1.1.562.36.2.1.123.5.13.1.4
This attribute counts the frames sent into the network with the Backward Congestion Indication (BCI) bit set. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDeFrmToIf 1.1.562.36.2.1.123.5.13.1.5
This attribute counts the frames sent to the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscCongestedToIf 1.1.562.36.2.1.123.5.13.1.6
This attribute counts the number of frame discards at the MPANL service due to local congestion in the direction toward the interface. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscDeCongestedToIf 1.1.562.36.2.1.123.5.13.1.7
This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the MPANL service, due to local congestion in the direction toward the interface. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciFrmFromIf 1.1.562.36.2.1.123.5.13.1.8
This attribute counts the frames received from the interface. Frames that are discarded due to error or excess are not counted. When the maximum count is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciFecnFrmFromIf 1.1.562.36.2.1.123.5.13.1.9
This attribute counts the frames received from the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciBecnFrmFromIf 1.1.562.36.2.1.123.5.13.1.10
This attribute counts the frames received from the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciFciFromSubnet 1.1.562.36.2.1.123.5.13.1.11
This attribute counts the frames received from the network with the Forward Congestion Indication (FCI) bit set. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciBciFromSubnet 1.1.562.36.2.1.123.5.13.1.12
This attribute counts the frames received from the network with the Backward Congestion Indication (BCI) bit set. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDeFrmFromIf 1.1.562.36.2.1.123.5.13.1.13
This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciExcessFrmFromIf 1.1.562.36.2.1.123.5.13.1.14
This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enforcement. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscExcessFromIf 1.1.562.36.2.1.123.5.13.1.15
This attribute counts the frames which were discarded due to rate enforcement. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscFrameAbit 1.1.562.36.2.1.123.5.13.1.16
This attribute counts the number of frame discards at the MPANL Service, due to an inactive PVC status, in the direction toward the network. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscCongestedFromIf 1.1.562.36.2.1.123.5.13.1.17
This attribute counts the number of frame discards at the MPANL service due to local congestion in the direction toward the network. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscDeCongestedFromIf 1.1.562.36.2.1.123.5.13.1.18
This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the MPANL service, due to local congestion, in the direction toward the network. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciErrorShortFrmFromIf 1.1.562.36.2.1.123.5.13.1.19
This attribute counts the frames received with 0 octets in the information field. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciErrorLongFrmFromIf 1.1.562.36.2.1.123.5.13.1.20
This attribute counts the frames received with number of octets in the information field greater than the subscribed maximum. When the count reaches maximum it wraps to zero. Frames whose lengths are greater than the hardware receive buffer are ignored by the hardware and are therefore not included in this count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciBecnFrmSetByService 1.1.562.36.2.1.123.5.13.1.21
This attribute counts the number of frames with BECN set by the MPANL service. It is incremented whenever the MPANL service sets BECN on a frame upon detecting local congestion. This count is incremented regardless of whether the frame already bears a set BECN bit since its use is to determine the place of congestion. When the count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciBytesToIf 1.1.562.36.2.1.123.5.13.1.22
This attribute counts the bytes sent out the interface. When the maximum count is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDeBytesToIf 1.1.562.36.2.1.123.5.13.1.23
This attribute counts the bytes sent to the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscCongestedToIfBytes 1.1.562.36.2.1.123.5.13.1.24
This attribute counts the number of byte discards at the MPANL service due to local congestion in the direction toward the link. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscDeCongestedToIfBytes 1.1.562.36.2.1.123.5.13.1.25
This attribute counts the number of discard eligible (DE=1) byte discards at the MPANL service due to local congestion in the direction toward the link. When the maximum count is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciBytesFromIf 1.1.562.36.2.1.123.5.13.1.26
This attribute counts the bytes received from the interface. Bytes that are discarded due to error or excess are not counted. When the maximum count is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDeBytesFromIf 1.1.562.36.2.1.123.5.13.1.27
This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciExcessBytesFromIf 1.1.562.36.2.1.123.5.13.1.28
This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enforcement. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscExcessFromIfBytes 1.1.562.36.2.1.123.5.13.1.29
This attribute counts the bytes which were discarded due to rate enforcement. When the count reaches maximum it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscByteAbit 1.1.562.36.2.1.123.5.13.1.30
This attribute counts the bytes which were discarded due to aBit turned off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscCongestedFromIfBytes 1.1.562.36.2.1.123.5.13.1.31
This attribute counts the number of byte discards at the MPANL service due to local congestion in the direction toward the network. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscDeCongestedFromIfBytes 1.1.562.36.2.1.123.5.13.1.32
This attribute counts the number of discard eligible (DE=1) byte discards at the MPANL service due to local congestion in the direction toward the network. When the maximum count is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciErrorLongBytesFromIf 1.1.562.36.2.1.123.5.13.1.34
This attribute counts the bytes received with number of octets in the information field greater than the subscribed maximum. When the count reaches maximum it wraps to zero. Bytes whose lengths are greater than the hardware receive buffer are ignored by the hardware and are therefore not included in this count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciTransferPriorityToNetwork 1.1.562.36.2.1.123.5.13.1.37
This attribute is obsolete. It is replaced by attribute transferPriorityToNetwork under group FrsNniDataLinkConnectionIdentifierServiceParametersOp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15)  

mscMpanlDlciTransferPriorityFromNetwork 1.1.562.36.2.1.123.5.13.1.38
This attribute is obsolete. It is replaced by attribute transferPriorityFromNetwork under group FrsNniDataLinkConnectionIdentifierServiceParametersOp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15)  

mscMpanlDlciIntTable 1.1.562.36.2.1.123.5.14
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics for the MPANL Data Link Connection Identifier interval data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciIntEntry

mscMpanlDlciIntEntry 1.1.562.36.2.1.123.5.14.1
An entry in the mscMpanlDlciIntTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciIntEntry  

mscMpanlDlciStartTime 1.1.562.36.2.1.123.5.14.1.1
This attribute indicates the start time of this interval period. If the Vc spans 12 hour time or time of day change, startTime reflects new time as recorded at 12 hour periods or time of day changes. A new interval period is started each time an accounting record is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnterpriseDateAndTime Size(0|19)  

mscMpanlDlciTotalIngressBytes 1.1.562.36.2.1.123.5.14.1.2
This attribute counts the total bytes received from the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned64 Size(8)  

mscMpanlDlciTotalEgressBytes 1.1.562.36.2.1.123.5.14.1.3
This attribute counts the total bytes sent to the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned64 Size(8)  

mscMpanlDlciEirIngressBytes 1.1.562.36.2.1.123.5.14.1.4
This attribute counts the total bytes with the Discard Eligibility (DE) bit set sent to the subnet since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned64 Size(8)  

mscMpanlDlciEirEgressBytes 1.1.562.36.2.1.123.5.14.1.5
This attribute counts the total bytes with the Discard Eligibility (DE) bit set sent to the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned64 Size(8)  

mscMpanlDlciDiscardedBytes 1.1.562.36.2.1.123.5.14.1.6
This attribute counts the total bytes in invalid frames received from the interface and discarded at the DLCI since the start of the interval period. This count is a sum of octets in frames discarded due to the number of octets in the information field greater than the subscribed maximum or equal to 0, due to aBit turned off, or due to rate enforcement. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned64 Size(8)  

mscMpanlDlciTotalIngressSegFrm 1.1.562.36.2.1.123.5.14.1.7
If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the total number of segments in frames received from the interface since the start of the interval period. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the total number of frames received from the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciTotalEgressSegFrm 1.1.562.36.2.1.123.5.14.1.8
If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the total number of segments in frames sent to the interface since the start of the interval period. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the total number of frames sent to the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciEirIngressSegFrm 1.1.562.36.2.1.123.5.14.1.9
If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in frames with the Discard Eligibility (DE) bit set sent to the subnet since the start of the interval period. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the number of frames with the Discard Eligibility (DE) bit set sent to the subnet since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciEirEgressSegFrm 1.1.562.36.2.1.123.5.14.1.10
If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in frames with the Discard Eligibility (DE) bit set sent to the interface since the start of the interval period. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the number of frames with the Discard Eligibility (DE) bit set sent to the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciDiscardedSegFrm 1.1.562.36.2.1.123.5.14.1.11
If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in invalid frames received from the interface and discarded at the DLCI. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the number of invalid frames received from the interface and discarded at the DLCI. Segments of frames are counted since the start of the interval period. The count is reset to zero when an accounting record is generated. The count is a sum of segments in frames or frames discarded due to the number of octets in the information field greater than the subscribed maximum or equal to 0, due to aBit turned off, or due to rate enforcement.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciCallReferenceNumber 1.1.562.36.2.1.123.5.14.1.17
This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciElapsedDifference 1.1.562.36.2.1.123.5.14.1.18
This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since the call started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciAbitTable 1.1.562.36.2.1.123.5.15
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the A-Bit status information for this Data Link Connection Identifier. A-Bit status information is only applicable for SPVCs. For SVCs, the values of attributes under this group are all notApplicable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciAbitEntry

mscMpanlDlciAbitEntry 1.1.562.36.2.1.123.5.15.1
An entry in the mscMpanlDlciAbitTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciAbitEntry  

mscMpanlDlciABitStatusToIf 1.1.562.36.2.1.123.5.15.1.1
This attribute is the most recent A-Bit status sent to the interface. The A-Bit status is originated from the SPVC end point at the remote end of the Passport subnet and it is relayed to the interface by Mpanl. When an inactive setting is sent out, Mpanl will discard any data offered from the interface. When an active setting is sent out, Mpanl will try to relay all data offered from the interface to the other end of the SPVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1), notApplicable(2)  

mscMpanlDlciABitReasonToIf 1.1.562.36.2.1.123.5.15.1.2
This attribute provides the reason (if any) for an inactive status to be sent to the interface. This reason is not applicable for an active status. A-Bit status reason description: The A-Bit status reason is notApplicable when the A-Bit status is active. The A-Bit status reason is remoteUserSignaled if the SPVC end point originating the A-Bit status has detected that the virtual circuit is down at the remote network through the LMI protocol. The SPVC end point must be running network site LMI protocol for this A-Bit status reason to be sent. The A-Bit status reason is remoteLmiError if the LMI protocol is down at the SPVC end point originating this A-Bit status reason. The A-Bit status reason is remoteLinkDown if the physical interface is disabled at the SPVC end point originating this A-Bit status reason. The A-Bit reason is vcDown if no A-Bit status has been sent to the interface (i.e., no A-Bit status has been relayed).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), remoteUserSignaled(1), remoteLmiError(3), remoteLinkDown(5), vcDown(6)  

mscMpanlDlciABitStatusFromIf 1.1.562.36.2.1.123.5.15.1.3
This attribute is the most recent A-Bit status received from the interface. It is an indication from the equipment attached to the interface on whether it is ready to accept data. Mpanl relays the A- Bit status from interface to the other end of the SPVC. When an inactive setting is received, Mpanl will discard any data offered from the subnet. When an active setting is received, Mpanl will try to relay all data offered from the subnet to the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1), notApplicable(2)  

mscMpanlDlciABitReasonFromIf 1.1.562.36.2.1.123.5.15.1.4
This attribute provides the reason (if any) for an inactive status to be sent to the subnet. This reason is not applicable for an active status. A-Bit status reason description: The A-Bit status reason is notApplicable when the A-Bit status is active. The A-Bit status reason is remoteUserSignaled if the SPVC end point originating the A-Bit status has detected that the DLCI is inactive at the remote network through the LMI protocol. The SPVC end point must be running network site LMI protocol for this A-Bit status reason to be sent. The A-Bit status reason is remoteLmiError if the LMI protocol is down at the SPVC end point originating this A-Bit status reason. The A-Bit status reason is remoteLinkDown if the physical interface is disabled at the SPVC end point originating this A-Bit status reason. The A-Bit reason is vcDown if no A-Bit status has been received from the interface (i.e., no A-Bit status has been relayed).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), remoteUserSignaled(1), remoteLmiError(3), remoteLinkDown(5), vcDown(6)  

mscMpanlDlciLoopbackState 1.1.562.36.2.1.123.5.15.1.5
This attribute has the value on when the DLCI is in loopback mode and off otherwise. This loopback command verbs start and stop are used to initiate and terminate the loopback mode for a DLCI. While loopbackState is on, an active A-bit signal will be reliably propagated across the subnet to the remote DLCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscMpanlDlciLb 1.1.562.36.2.1.123.5.2
OBJECT IDENTIFIER    

mscMpanlDlciLbRowStatusTable 1.1.562.36.2.1.123.5.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscMpanlDlciLb components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciLbRowStatusEntry

mscMpanlDlciLbRowStatusEntry 1.1.562.36.2.1.123.5.2.1.1
A single entry in the table represents a single mscMpanlDlciLb component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciLbRowStatusEntry  

mscMpanlDlciLbRowStatus 1.1.562.36.2.1.123.5.2.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlDlciLb components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMpanlDlciLbComponentName 1.1.562.36.2.1.123.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlDlciLbStorageType 1.1.562.36.2.1.123.5.2.1.1.4
This variable represents the storage type value for the mscMpanlDlciLb tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlDlciLbIndex 1.1.562.36.2.1.123.5.2.1.1.10
This variable represents the index for the mscMpanlDlciLb tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlDlciLbStatsTable 1.1.562.36.2.1.123.5.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains all the statistics for the data loopback tool.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciLbStatsEntry

mscMpanlDlciLbStatsEntry 1.1.562.36.2.1.123.5.2.10.1
An entry in the mscMpanlDlciLbStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciLbStatsEntry  

mscMpanlDlciLbLocalTotalFrm 1.1.562.36.2.1.123.5.2.10.1.1
This attribute records the number of frames looped back to the link since loopback was last started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciLbLocalTotalBytes 1.1.562.36.2.1.123.5.2.10.1.2
This attribute records the number of bytes looped back to the link since loopback mode was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciLbLocalFecnFrm 1.1.562.36.2.1.123.5.2.10.1.3
This attribute records the number of frames with the Forward Explicit Congestion Notification (FECN) bit set, looped back to the link since the loopback mode was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciLbLocalBecnFrm 1.1.562.36.2.1.123.5.2.10.1.4
This attribute records the number of frames with the Backward Explicit Congestion Notification (BECN) bit set, looped back to the link since the loopback mode was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciLbLocalDeFrm 1.1.562.36.2.1.123.5.2.10.1.5
This attribute records the number of frames with the Discard Eligibility (DE) bit set, looped back to the link since the loopback mode was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciLbLocalDeBytes 1.1.562.36.2.1.123.5.2.10.1.6
This attribute records the number of bytes in frames with the Discard Eligibility (DE) bit set, looped back to the link since the loopback mode was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciLbRemoteTotalFrm 1.1.562.36.2.1.123.5.2.10.1.7
This attribute records the number of frames looped back to the subnet since loopback was last started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciLbRemoteTotalBytes 1.1.562.36.2.1.123.5.2.10.1.8
This attribute records the number of bytes looped back to the subnet since loopback was last started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciLbRemoteFecnFrm 1.1.562.36.2.1.123.5.2.10.1.9
This attribute records the number of frames with the Forward Explicit Congestion Notification (FECN) bit set, looped back to the subnet since the loopback mode was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciLbRemoteBecnFrm 1.1.562.36.2.1.123.5.2.10.1.10
This attribute records the number of frames with the Backward Explicit Congestion Notification (BECN) bit set, looped back to the subnet since the loopback mode was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciLbRemoteDeFrm 1.1.562.36.2.1.123.5.2.10.1.13
This attribute records the number of frames with the Discard Eligibility (DE) bit set, looped back to the subnet since the loopback mode was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciLbRemoteDeBytes 1.1.562.36.2.1.123.5.2.10.1.14
This attribute records the number of bytes in frames with the Discard Eligibility (DE) bit set, looped back to the subnet since the loopback mode was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciVc 1.1.562.36.2.1.123.5.3
OBJECT IDENTIFIER    

mscMpanlDlciVcRowStatusTable 1.1.562.36.2.1.123.5.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscMpanlDlciVc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciVcRowStatusEntry

mscMpanlDlciVcRowStatusEntry 1.1.562.36.2.1.123.5.3.1.1
A single entry in the table represents a single mscMpanlDlciVc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciVcRowStatusEntry  

mscMpanlDlciVcRowStatus 1.1.562.36.2.1.123.5.3.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlDlciVc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMpanlDlciVcComponentName 1.1.562.36.2.1.123.5.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlDlciVcStorageType 1.1.562.36.2.1.123.5.3.1.1.4
This variable represents the storage type value for the mscMpanlDlciVc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlDlciVcIndex 1.1.562.36.2.1.123.5.3.1.1.10
This variable represents the index for the mscMpanlDlciVc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlDlciVcCadTable 1.1.562.36.2.1.123.5.3.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciVcCadEntry

mscMpanlDlciVcCadEntry 1.1.562.36.2.1.123.5.3.10.1
An entry in the mscMpanlDlciVcCadTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciVcCadEntry  

mscMpanlDlciVcType 1.1.562.36.2.1.123.5.3.10.1.1
This attribute displays the type of call, pvc,svc,spvc or frf10spvc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER svc(0), pvc(1), spvc(2), frf10spvc(3)  

mscMpanlDlciVcState 1.1.562.36.2.1.123.5.3.10.1.2
This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

mscMpanlDlciVcPreviousState 1.1.562.36.2.1.123.5.3.10.1.3
This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

mscMpanlDlciVcDiagnosticCode 1.1.562.36.2.1.123.5.3.10.1.4
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscMpanlDlciVcPreviousDiagnosticCode 1.1.562.36.2.1.123.5.3.10.1.5
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscMpanlDlciVcCalledNpi 1.1.562.36.2.1.123.5.3.10.1.6
This attribute displays the Numbering Plan Indicator (NPI) of the called end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscMpanlDlciVcCalledDna 1.1.562.36.2.1.123.5.3.10.1.7
This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DigitString Size(1..15)  

mscMpanlDlciVcCalledLcn 1.1.562.36.2.1.123.5.3.10.1.8
This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

mscMpanlDlciVcCallingNpi 1.1.562.36.2.1.123.5.3.10.1.9
This attribute displays the Numbering Plan Indicator (NPI) of the calling end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscMpanlDlciVcCallingDna 1.1.562.36.2.1.123.5.3.10.1.10
This attribute displays the Data Network Address (Dna) of the calling end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DigitString Size(1..15)  

mscMpanlDlciVcCallingLcn 1.1.562.36.2.1.123.5.3.10.1.11
This attribute displays the Logical Channel Number of the calling end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

mscMpanlDlciVcAccountingEnabled 1.1.562.36.2.1.123.5.3.10.1.12
This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

mscMpanlDlciVcFastSelectCall 1.1.562.36.2.1.123.5.3.10.1.13
This attribute displays that this is a fast select call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscMpanlDlciVcPathReliability 1.1.562.36.2.1.123.5.3.10.1.19
This attribute displays the path reliability.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

mscMpanlDlciVcAccountingEnd 1.1.562.36.2.1.123.5.3.10.1.20
This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER callingEnd(0), calledEnd(1)  

mscMpanlDlciVcPriority 1.1.562.36.2.1.123.5.3.10.1.21
This attribute displays whether the call is a normal or a high priority call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

mscMpanlDlciVcSegmentSize 1.1.562.36.2.1.123.5.3.10.1.22
This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

mscMpanlDlciVcMaxSubnetPktSize 1.1.562.36.2.1.123.5.3.10.1.27
This attribute indicates the maximum packet size allowed on the Vc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4096  

mscMpanlDlciVcRcosToNetwork 1.1.562.36.2.1.123.5.3.10.1.28
This attribute indicates the routing metric routing class of service to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER throughput(0), delay(1), multimedia(2)  

mscMpanlDlciVcRcosFromNetwork 1.1.562.36.2.1.123.5.3.10.1.29
This attribute displays the routing metric Routing Class of Service from the Network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER throughput(0), delay(1), multimedia(2)  

mscMpanlDlciVcEmissionPriorityToNetwork 1.1.562.36.2.1.123.5.3.10.1.30
This attribute displays the network internal emission priotity to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), high(1), interrupting(2)  

mscMpanlDlciVcEmissionPriorityFromNetwork 1.1.562.36.2.1.123.5.3.10.1.31
This attribute displays the network internal emission priotity from the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), high(1), interrupting(2)  

mscMpanlDlciVcDataPath 1.1.562.36.2.1.123.5.3.10.1.32
This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..32)  

mscMpanlDlciVcIntdTable 1.1.562.36.2.1.123.5.3.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciVcIntdEntry

mscMpanlDlciVcIntdEntry 1.1.562.36.2.1.123.5.3.11.1
An entry in the mscMpanlDlciVcIntdTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciVcIntdEntry  

mscMpanlDlciVcCallReferenceNumber 1.1.562.36.2.1.123.5.3.11.1.1
This attribute is obsolete. It is replaced by the callReferenceNumber attribute to display the call reference number in decimal. The SNMP reference for the callReferenceNumber attribute is callReferenceNumberDecimal.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Hex 0..16777215  

mscMpanlDlciVcElapsedTimeTillNow 1.1.562.36.2.1.123.5.3.11.1.2
This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscMpanlDlciVcSegmentsRx 1.1.562.36.2.1.123.5.3.11.1.3
This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscMpanlDlciVcSegmentsSent 1.1.562.36.2.1.123.5.3.11.1.4
This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscMpanlDlciVcStartTime 1.1.562.36.2.1.123.5.3.11.1.5
This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnterpriseDateAndTime Size(0|19)  

mscMpanlDlciVcCallReferenceNumberDecimal 1.1.562.36.2.1.123.5.3.11.1.7
This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciVcFrdTable 1.1.562.36.2.1.123.5.3.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciVcFrdEntry

mscMpanlDlciVcFrdEntry 1.1.562.36.2.1.123.5.3.12.1
An entry in the mscMpanlDlciVcFrdTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciVcFrdEntry  

mscMpanlDlciVcFrmCongestedToSubnet 1.1.562.36.2.1.123.5.3.12.1.2
This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcCannotForwardToSubnet 1.1.562.36.2.1.123.5.3.12.1.3
This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcNotDataXferToSubnet 1.1.562.36.2.1.123.5.3.12.1.4
This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcOutOfRangeFrmFromSubnet 1.1.562.36.2.1.123.5.3.12.1.5
This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcCombErrorsFromSubnet 1.1.562.36.2.1.123.5.3.12.1.6
This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcDuplicatesFromSubnet 1.1.562.36.2.1.123.5.3.12.1.7
This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcNotDataXferFromSubnet 1.1.562.36.2.1.123.5.3.12.1.8
This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcFrmLossTimeouts 1.1.562.36.2.1.123.5.3.12.1.9
This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcOoSeqByteCntExceeded 1.1.562.36.2.1.123.5.3.12.1.10
This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcPeakOoSeqPktCount 1.1.562.36.2.1.123.5.3.12.1.11
This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcPeakOoSeqFrmForwarded 1.1.562.36.2.1.123.5.3.12.1.12
This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcSendSequenceNumber 1.1.562.36.2.1.123.5.3.12.1.13
This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcPktRetryTimeouts 1.1.562.36.2.1.123.5.3.12.1.15
This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcPeakRetryQueueSize 1.1.562.36.2.1.123.5.3.12.1.16
This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcSubnetRecoveries 1.1.562.36.2.1.123.5.3.12.1.17
This attribute displays the number of successful Vc recovery attempts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5000  

mscMpanlDlciVcOoSeqPktCntExceeded 1.1.562.36.2.1.123.5.3.12.1.19
This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscMpanlDlciVcPeakOoSeqByteCount 1.1.562.36.2.1.123.5.3.12.1.20
This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..50000  

mscMpanlDlciVcDmepTable 1.1.562.36.2.1.123.5.3.417
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciVcDmepEntry

mscMpanlDlciVcDmepEntry 1.1.562.36.2.1.123.5.3.417.1
An entry in the mscMpanlDlciVcDmepTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciVcDmepEntry  

mscMpanlDlciVcDmepValue 1.1.562.36.2.1.123.5.3.417.1.1
This variable represents both the value and the index for the mscMpanlDlciVcDmepTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscMpanlDlciLCo 1.1.562.36.2.1.123.5.4
OBJECT IDENTIFIER    

mscMpanlDlciLCoRowStatusTable 1.1.562.36.2.1.123.5.4.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscMpanlDlciLCo components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciLCoRowStatusEntry

mscMpanlDlciLCoRowStatusEntry 1.1.562.36.2.1.123.5.4.1.1
A single entry in the table represents a single mscMpanlDlciLCo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciLCoRowStatusEntry  

mscMpanlDlciLCoRowStatus 1.1.562.36.2.1.123.5.4.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlDlciLCo components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMpanlDlciLCoComponentName 1.1.562.36.2.1.123.5.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlDlciLCoStorageType 1.1.562.36.2.1.123.5.4.1.1.4
This variable represents the storage type value for the mscMpanlDlciLCo tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlDlciLCoIndex 1.1.562.36.2.1.123.5.4.1.1.10
This variable represents the index for the mscMpanlDlciLCo tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlDlciLCoPathDataTable 1.1.562.36.2.1.123.5.4.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains all operational attributes for the path oriented LCo.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciLCoPathDataEntry

mscMpanlDlciLCoPathDataEntry 1.1.562.36.2.1.123.5.4.10.1
An entry in the mscMpanlDlciLCoPathDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciLCoPathDataEntry  

mscMpanlDlciLCoState 1.1.562.36.2.1.123.5.4.10.1.1
This attribute reflects the current state of the connection. The pathDown state indicates that the application has not yet signalled for a path. The selectingRoute state occurs when a request has been sent to the route selector and it has not yet responded. The connectingState occurs while a path is being established. The pathUp state is the normal operational state of a path. The pathDownRetrying state indicates a path that attempted route selection but received no route and is now waiting to retry route selection again.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pathDown(0), selectingRoute(1), connecting(2), pathUp(3), pathDownRetrying(4)  

mscMpanlDlciLCoEnd 1.1.562.36.2.1.123.5.4.10.1.3
This attribute identifies whether this is the calling or called end of the path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER calling(0), called(1)  

mscMpanlDlciLCoCostMetric 1.1.562.36.2.1.123.5.4.10.1.4
This attribute gives the route's total cost metric. It is calculated as the sum of the cost metric of all trunks in the path at the time the connection was established. The cost metric of a trunk is defined by the trunkCost attribute of the Trunk component. The costMetric for an LCo that is originated and terminated on the same module is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscMpanlDlciLCoDelayMetric 1.1.562.36.2.1.123.5.4.10.1.5
This attribute gives the total delay of the route as the one way delay for a 512 byte packet. It is calculated as the sum of the delays of all trunks in the path stored in topology at the time the connection was established. The delay for an LCo that is originated and terminated on the same module is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000  

mscMpanlDlciLCoRoundTripDelay 1.1.562.36.2.1.123.5.4.10.1.6
This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LCo. The number reported is given in milliseconds to the nearest millisecond. A value of one millisecond is reported if the time is less than 1 millisecond even though the delay may be less than 1 millisecond when the LCo is originated and terminated on the same module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..200000  

mscMpanlDlciLCoSetupPriority 1.1.562.36.2.1.123.5.4.10.1.7
This attribute gives the priority at which the current path is established. Zero is the highest priority and four is the lowest. The holdingPriority, a complementary attribute of this component, indicates the priority a path maintains once it is established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4  

mscMpanlDlciLCoHoldingPriority 1.1.562.36.2.1.123.5.4.10.1.8
This attribute gives the priority at which a path holds its current path once the path is established. Zero is the highest priority and four is the lowest. The setupPriority, a complementary attribute, indicates the priority of a path at establishment time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4  

mscMpanlDlciLCoRequiredTxBandwidth 1.1.562.36.2.1.123.5.4.10.1.9
This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of the trunks of its route. This attribute represents the bandwidth for traffic outgoing to the remote end point. The originating end of the connection determines this value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2048000  

mscMpanlDlciLCoRequiredRxBandwidth 1.1.562.36.2.1.123.5.4.10.1.10
This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of trunks of its route. This attribute represents the bandwidth for traffic incoming from the remote end point. The originating end of the connection determines this value
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..2048000  

mscMpanlDlciLCoRequiredTrafficType 1.1.562.36.2.1.123.5.4.10.1.11
This operational attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one of them. The originating end of the connection determines the type. These are arbitrary designations for traffic type. The voice, data and video traffic types are defined, and five other arbitrary traffic types can be defined by the network administration. This attribute is used in the route selection process to restrict the route to trunks that support this traffic type. The supportedTrafficType trunk attribute lists all the types of traffic allowed on the trunk. For example, if requiredTrafficType is specified as trafficType1 then only trunks that include trafficType1 in supportedTrafficType, will be candidates for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER voice(0), data(1), video(2), trafficType1(3), trafficType2(4), trafficType3(5), trafficType4(6), trafficType5(7)  

mscMpanlDlciLCoPermittedTrunkTypes 1.1.562.36.2.1.123.5.4.10.1.12
This operational attribute lists up to eight types of trunk that can be used on the route. The originating end of the connection determines the types. The terrestrial and satellite trunk types have been defined, leaving six remaining arbitrary types that can be defined by the network administration. The trunk's type is indicated in the trunkType attribute of the Trunk component. When selecting a route, PORS only chooses trunks whose trunkType are in the permittedTrunkTypes for the path. Description of bits: terrestrial(0) satellite(1) trunkType1(2) trunkType2(3) trunkType3(4) trunkType4(5) trunkType5(6) trunkType6(7)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscMpanlDlciLCoRequiredSecurity 1.1.562.36.2.1.123.5.4.10.1.13
This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and seven represents the least secure. The trunk's security is indicated by the trunkSecurity attribute of the Trunk component, and has values identical in range and meaning to the requiredSecurity attribute. PORS ensures that any route selected does not contain a trunk whose trunkSecurity attribute is numerically greater than the requiredSecurity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

mscMpanlDlciLCoRequiredCustomerParameter 1.1.562.36.2.1.123.5.4.10.1.14
This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection determines the customer defined parameter. Its value, a number from zero to seven, is chosen by a network administration to have a meaning specific to their network, thus allowing them to customize the use of their trunks. A complementary trunk attribute, customerParameter, also has a value from zero to seven. The route selection process does not consider trunks whose customerParameter is greater than the requiredCustomerParameter of the path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

mscMpanlDlciLCoEmissionPriority 1.1.562.36.2.1.123.5.4.10.1.15
This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end of the connection selects the emissionPriority. EmissionPriority of zero indicates the highest emission priority, while two indicates the lowest emission priority. Packets with a higher emissionPriority (or numerically less) are serviced and sent out before the packets of lower emissionPriority (or numerically higher).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2  

mscMpanlDlciLCoDiscardPriority 1.1.562.36.2.1.123.5.4.10.1.16
This attribute indicates the importance of the packets on the path.The originating end of the connection sets discardPriority. One is used for paths carrying the most important traffic, and three is used for paths carrying the least important traffic. Packets with lower discardPriority(numerically lower) are discarded after packets with a higher discardPriority(numerically higher).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..3  

mscMpanlDlciLCoRetryCount 1.1.562.36.2.1.123.5.4.10.1.18
This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count should be three or below if the network is performing adequately. A high value indicates that the route selection is often performed using an out-of-date view of available network bandwidth and/or topology. This attribute will only increase at the calling end of the connection. This attribute is reset each time a path reconnects and stops counting when it reaches its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscMpanlDlciLCoPathFailureCount 1.1.562.36.2.1.123.5.4.10.1.19
This attribute is the count of the number of times the path has successfully reconnected. It is set to zero the first time the path is up. If a path fails anytime after connecting, this count will be incremented when the path is up again. Failed route requests do not count in this statistic. See retryCount(rcount) - page 78. This attribute stops counting at its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mscMpanlDlciLCoReasonForNoRoute 1.1.562.36.2.1.123.5.4.10.1.20
This attribute is the route selection's reasonForNoRoute and provides a brief reason for which a route was not selected. The reasons are essentially self-explanatory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), destinationNameTooLong(1), destinationNotSpecified(2), unknownDestinationName(3), incorrectDestination(4), incorrectDestinationEndPoint(5), unknownSource(6), unknownDestination(7), sameNode(8), routeCostTooMuch(9), routesDelayTooLong(10), attributesNotMet(11), anError(12), attributeProfileProblem(13), manualPathIndexProblem(14)  

mscMpanlDlciLCoLastTearDownReason 1.1.562.36.2.1.123.5.4.10.1.21
This attribute reflects the last tear down reason for a connection (LCo). In many cases this displays the reason for a momentary service interruption. This attribute applies to the last path failure only. If a path is no longer up, this may indicate why the path has failed. In many cases an alarm will also be generated with more specific information. The following is a brief description of the reasons: none - This path has no information for the teardown. normalShutDown - This path has gone down due to normal call termination. insufficientTxLcOrBandwidth - At present there is either no available bandwidth or logical channel numbers available on one or more of the trunks for this path in the transmit direction. insufficientRxLcOrBandwidth - At present there is either no available bandwidth or logical channel numbers available on one or more of the trunks for this path in the receive direction. trunkFailure- A trunk on the path has failed or has gone down due to a provisioning change of a critical attribute. trunkCardFailure- A trunk FP card has failed along the path. accessCardFailure- The FP on which the peer access service was running has failed. operatorForced- The path has terminated due to the operator locking a trunk along the path. lostLcnClash- The path has terminated because the PAs at both ends of an intermediate trunk have allocated the same LC to different calls. When this happens both calls must go down and then try to come up again a fraction of a second later (effectively ensuring that they will now be assigned different LCs). It is normal to get the odd clash especially when the PA's usedLC is approaching the PA's maxLC. networkCongestion - The path has failed due to control information being lost and not recoverable. trunkNotFound - Occurs on a manual path usually. Check for trunks not up or names provisioned incorrectly. farEndNotFound - The far end is not provisioned or is not up. Check remote Name. wrongModuleReached - This may occur on a manual path. Check provisioning for correct trunk and service names. For a normal path, the network Topology may be changing. Check remote provisioned DNA. farEndBusy - The far end has been reached but it is busy. Check remote provisioned DNA and remote end provisioning. unknownReason - The failure was not resolved. farEndNotReady - The remote end was reached but the connection was refused due to the remote end not being enabled. serviceTypeMismatch - The remote service type does not match this service type. Check provisioning. reconnectFromFarEnd - The remote end re-established this connection. Check the remote end lastTearDownReason to determine the real reason. bumped - Another call bumped this path from a trunk to get bandwidth (or an LC) which it required to come up. This other path had a higher setupPriority than this path's holdingPriority, hence it was allowed to steal the bandwidth (or LC) from this path. optimized - This call has been rerouted due to the optimization feature. The call is still active; this just indicates why the path changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), normalShutDown(1), insufficientTxLcOrBandwidth(2), insufficientRxLcOrBandwidth(3), trunkFailure(4), trunkCardFailure(5), operatorForced(6), lostLcnClash(7), networkCongestion(8), trunkNotFound(9), farEndNotFound(10), wrongModuleReached(11), farEndBusy(12), callLoopedBack(13), unknownReason(14), farEndNotReady(15), remoteNameMismatch(16), serviceTypeMismatch(17), reconnectFromFarEnd(18), bumped(19), accessCardFailure(20), optimized(21), overrideRemoteName(22)  

mscMpanlDlciLCoPathFailureAction 1.1.562.36.2.1.123.5.4.10.1.22
This attribute displays whether the application is set to tolerate a momentary interruption of a path while a new path is selected. If disconnectConnection is displayed, the application is informed as soon as possible about a failure by disconnection. If the attribute displays reRoutePath, the path may attempt an immediate reroute, provided the failure is a recoverable failure. If rerouting fails the application is informed of the failure. With this option set to reRoutePath the LCo may wait up to 30 seconds before informing the service of complete disconnection in order to allow both ends to attempt to reconnect. All pathTypes respect this attribute. Also, on a manualPath with both ends provisioned with independent paths (at least with respect to the failure) this option will have the desired effect that the path is rerouted without complete disconnection at both ends.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disconnectConnection(0), reRoutePath(1)  

mscMpanlDlciLCoBumpPreference 1.1.562.36.2.1.123.5.4.10.1.23
This attribute specifies when bumping will occur during the route selection process. Bumping may occur when necessary or always. It will be necessary for a connection to bump if there is not enough resources for the connection to be established and these resources are occupied by a connection whose holdingPriority is lower (numerically higher) than the connection's setupPriority. A connection may also always bump in order to obtain the best route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bumpWhenNecessary(0), bumpToObtainBestRoute(1)  

mscMpanlDlciLCoOptimization 1.1.562.36.2.1.123.5.4.10.1.24
This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS component. Every path is as optimal as it can be when it is established, but as network traffic patterns and configurations change this path may no longer be as optimal as it could be. The PORS connection manager on a module requests circuits to optimize at the optimization interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscMpanlDlciLCoPathUpDateTime 1.1.562.36.2.1.123.5.4.10.1.25
This is the time stamp when the current path was established or reestablished.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnterpriseDateAndTime Size(0|19)  

mscMpanlDlciLCoStatsTable 1.1.562.36.2.1.123.5.4.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics attributes for the path oriented LCo.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciLCoStatsEntry

mscMpanlDlciLCoStatsEntry 1.1.562.36.2.1.123.5.4.11.1
An entry in the mscMpanlDlciLCoStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciLCoStatsEntry  

mscMpanlDlciLCoPktsToNetwork 1.1.562.36.2.1.123.5.4.11.1.1
This attribute counts the number of packets transmitted to the network over this Logical Connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscMpanlDlciLCoBytesToNetwork 1.1.562.36.2.1.123.5.4.11.1.2
This attribute counts the number of bytes sent to the network over this Logical Connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscMpanlDlciLCoPktsFromNetwork 1.1.562.36.2.1.123.5.4.11.1.3
This attribute counts the number of packets received from the remote LCo via the network. This attribute wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscMpanlDlciLCoBytesFromNetwork 1.1.562.36.2.1.123.5.4.11.1.4
This attribute counts the number of bytes received from the remote LCo via the network. This attribute wraps to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

mscMpanlDlciLCoCallDataTable 1.1.562.36.2.1.123.5.4.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains all operational attributes for the path oriented LCo.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciLCoCallDataEntry

mscMpanlDlciLCoCallDataEntry 1.1.562.36.2.1.123.5.4.12.1
An entry in the mscMpanlDlciLCoCallDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciLCoCallDataEntry  

mscMpanlDlciLCoCallingNpi 1.1.562.36.2.1.123.5.4.12.1.27
This attribute displays the Numbering Plan Indicator (NPI) of the calling end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscMpanlDlciLCoCallingDna 1.1.562.36.2.1.123.5.4.12.1.28
This attribute displays the Data Network Address (DNA) of the calling end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DigitString Size(0..15)  

mscMpanlDlciLCoElapsedTimeTillNow 1.1.562.36.2.1.123.5.4.12.1.30
This attribute displays the total duration in tenths of miliseconds that a connection has been up for a call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscMpanlDlciLCoCallReferenceNumber 1.1.562.36.2.1.123.5.4.12.1.31
This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..16777215  

mscMpanlDlciLCoCalledNpi 1.1.562.36.2.1.123.5.4.12.1.33
This attribute indicates the Numbering Plan Indicator (NPI) of the called end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscMpanlDlciLCoCalledDna 1.1.562.36.2.1.123.5.4.12.1.34
This attribute indicates the Data Network Address (DNA) of the called (destination) DTE to which this call is sent. This address if defined at the receiving end will complete the logical connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DigitString Size(0..15)  

mscMpanlDlciLCoPathTable 1.1.562.36.2.1.123.5.4.401
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute contains the trunk component names over which the path has been instantiated and the remote end point name terminating the path.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciLCoPathEntry

mscMpanlDlciLCoPathEntry 1.1.562.36.2.1.123.5.4.401.1
An entry in the mscMpanlDlciLCoPathTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciLCoPathEntry  

mscMpanlDlciLCoPathValue 1.1.562.36.2.1.123.5.4.401.1.1
This variable represents both the value and the index for the mscMpanlDlciLCoPathTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..40)  

mscMpanlDlciJvc 1.1.562.36.2.1.123.5.5
OBJECT IDENTIFIER    

mscMpanlDlciJvcRowStatusTable 1.1.562.36.2.1.123.5.5.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscMpanlDlciJvc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciJvcRowStatusEntry

mscMpanlDlciJvcRowStatusEntry 1.1.562.36.2.1.123.5.5.1.1
A single entry in the table represents a single mscMpanlDlciJvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciJvcRowStatusEntry  

mscMpanlDlciJvcRowStatus 1.1.562.36.2.1.123.5.5.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlDlciJvc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMpanlDlciJvcComponentName 1.1.562.36.2.1.123.5.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlDlciJvcStorageType 1.1.562.36.2.1.123.5.5.1.1.4
This variable represents the storage type value for the mscMpanlDlciJvc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlDlciJvcIndex 1.1.562.36.2.1.123.5.5.1.1.10
This variable represents the index for the mscMpanlDlciJvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlDlciJvcOperTable 1.1.562.36.2.1.123.5.5.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of the Jvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciJvcOperEntry

mscMpanlDlciJvcOperEntry 1.1.562.36.2.1.123.5.5.10.1
An entry in the mscMpanlDlciJvcOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciJvcOperEntry  

mscMpanlDlciJvcCurrentState 1.1.562.36.2.1.123.5.5.10.1.1
This attribute indicates the current state of the JVC process. The state can be one of: null: waiting for an incoming call or a call request from MPANL, callRequest: waiting for the call connected from MPANL, callIndication: waiting for the call packet from MPANL, callBlockPresent: waiting for the Raccept packet from the subnet, active: relaying packets between the subnet and MPANL, discInitiated: not used by the DCE JVC, discPktPresent: not used by the DCE JVC, callDisconnected: waiting for the termination request from MPANL, callTerminated: waiting for the termination by MPANL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null(0), callRequest(1), callIndication(2), callBlockPresent(3), active(4), discInitiated(5), discPktPresent(6), callDisconnected(7), callTerminated(8)  

mscMpanlDlciJvcPreviousState 1.1.562.36.2.1.123.5.5.10.1.2
This attribute indicates the previous state of the JVC process. The state can be one of: null: waiting for an incoming call or a call request from MPANL, callRequest: waiting for the call connected from MPANL, callIndication: waiting for the call packet from MPANL, callBlockPresent: waiting for the Raccept packet from the subnet, active: relaying packets between the subnet and MPANL, discInitiated: not used by the DCE JVC, discPktPresent: not used by the DCE JVC, callDisconnected: waiting for the termination request from MPANL, callTerminated: waiting for the termination by MPANL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null(0), callRequest(1), callIndication(2), callBlockPresent(3), active(4), discInitiated(5), discPktPresent(6), callDisconnected(7), callTerminated(8)  

mscMpanlDlciJvcCallingNpi 1.1.562.36.2.1.123.5.5.10.1.6
This attribute contains the numbering plan indicator of the calling address. This attribute value is retrieved from the call packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscMpanlDlciJvcCallingAddress 1.1.562.36.2.1.123.5.5.10.1.7
This attribute contains the calling DataNetworkAddress of the interface. It includes the DNIC (first 4 digits) for X.121, and the CC (Country Code) for the E.164 address of the calling end. The maximum length of this attribute is 15 digits. This attribute value is retrieved from the call packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DigitString Size(1..15)  

mscMpanlDlciJvcCallingLcn 1.1.562.36.2.1.123.5.5.10.1.8
This attribute contains the calling LCN (logical channel number) of the interface. This number is assigned to the call request at the calling end. This attribute value is retrieved from the call packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4095  

mscMpanlDlciJvcCalledNpi 1.1.562.36.2.1.123.5.5.10.1.9
This attribute contains the numbering plan indicator of the called address. This attribute value is retrieved from the call packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscMpanlDlciJvcCalledAddress 1.1.562.36.2.1.123.5.5.10.1.10
This attribute contains the called DataNetworkAddress of the interface. It includes the DNIC (first 4 digits) for X.121, and the CC (Country Code) for the E.164 address of the called end. The maximum length of this attribute is 15 digits. This attribute value is retrieved from the Raccept packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DigitString Size(1..15)  

mscMpanlDlciJvcCalledLcn 1.1.562.36.2.1.123.5.5.10.1.11
This attribute contains the called LCN (logical channel number) of the interface. This number is assigned to the call request at the called end. This attribute value is retrieved from the Raccept packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4095  

mscMpanlDlciJvcStatTable 1.1.562.36.2.1.123.5.5.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the statistics collected by the Jvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlDlciJvcStatEntry

mscMpanlDlciJvcStatEntry 1.1.562.36.2.1.123.5.5.11.1
An entry in the mscMpanlDlciJvcStatTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlDlciJvcStatEntry  

mscMpanlDlciJvcPacketsFromSubnet 1.1.562.36.2.1.123.5.5.11.1.1
This attribute counts all packets including control packets received from the subnet. This number reflects also the packets sent to the MPANL process since the JVC does not drop or generate packets in this direction.The value of this attribute wraps to 0 when the maximum value is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciJvcPacketsToSubnet 1.1.562.36.2.1.123.5.5.11.1.2
This attribute counts all packets including control packets sent into the subnet. This number includes Renew Call Timer Packets that are generated by the JVC. The value of this attribute wraps to 0 when the maximum value is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciJvcPacketsDiscarded 1.1.562.36.2.1.123.5.5.11.1.3
This attribute counts discarded packets that can not be forwarded into the subnet because of subnet congestion. This attribute is increased when packet forwarding fails to forward a packet into the subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlDlciJvcProtocolErrors 1.1.562.36.2.1.123.5.5.11.1.4
This attribute counts the number of protocol errors detected by the JVC in both the MPANL and the subnet directions. A protocol error is counted in the following cases: - reception of a packet from MPANL while waiting for a Raccept packet from the subnet, - reception of a packet from the subnet following a call packet and before the callAccepted is received from MPANL, - reception of a packet from the subnet or from MPANL that is shorter than the subnet header. The value of this attribute wraps to 0 when the maximum value is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscMpanlSig 1.1.562.36.2.1.123.6
OBJECT IDENTIFIER    

mscMpanlSigRowStatusTable 1.1.562.36.2.1.123.6.1
This entry controls the addition and deletion of mscMpanlSig components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigRowStatusEntry

mscMpanlSigRowStatusEntry 1.1.562.36.2.1.123.6.1.1
A single entry in the table represents a single mscMpanlSig component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigRowStatusEntry  

mscMpanlSigRowStatus 1.1.562.36.2.1.123.6.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlSig components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMpanlSigComponentName 1.1.562.36.2.1.123.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlSigStorageType 1.1.562.36.2.1.123.6.1.1.4
This variable represents the storage type value for the mscMpanlSig tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlSigIndex 1.1.562.36.2.1.123.6.1.1.10
This variable represents the index for the mscMpanlSig tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlSigSysParmsTable 1.1.562.36.2.1.123.6.13
This group contains the provisionable Q.933 system parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigSysParmsEntry

mscMpanlSigSysParmsEntry 1.1.562.36.2.1.123.6.13.1
An entry in the mscMpanlSigSysParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigSysParmsEntry  

mscMpanlSigCallSetupTimer 1.1.562.36.2.1.123.6.13.1.1
This attribute specifies the time the network will wait for a response to the SETUP message sent to the called user. Upon timer expiry, the SETUP message is retransmitted. The second expiry of this timer causes the call to be cleared. This value is specified in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

mscMpanlSigDisconnectTimer 1.1.562.36.2.1.123.6.13.1.2
This attribute specifies the time the network will wait for a response to the DISCONNECT message sent to the user. Upon timer expiry, the RELEASE message is sent. This value is specified in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

mscMpanlSigReleaseTimer 1.1.562.36.2.1.123.6.13.1.3
This attribute specifies the time the network will wait for a response to the RELEASE message sent to the user. Upon timer expiry, the RELEASE message is retransmitted. The second expiry of the timer causes the call to be released. This value is specified in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

mscMpanlSigCallProceedingTimer 1.1.562.36.2.1.123.6.13.1.4
This attribute specifies the time the network will wait for the CONNECT message from the called user after the network has received the optional CALL PROCEEDING message from the called user. Upon timer expiry, the call is cleared. This value is specified in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

mscMpanlSigNetworkType 1.1.562.36.2.1.123.6.13.1.5
This attribute specifies whether this Frame Relay service is running on a public or a private network. This value is used solely in populating applicable information elements within those Q.933 messages that require a public or private network indication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER private(1), public(2)  

mscMpanlSigLapfSysTable 1.1.562.36.2.1.123.6.14
This group contains the provisionable attributes for the SVC data link layer. The data link layer is governed primarily through ITU specification Q.922, and operates over DLCI 0..
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigLapfSysEntry

mscMpanlSigLapfSysEntry 1.1.562.36.2.1.123.6.14.1
An entry in the mscMpanlSigLapfSysTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigLapfSysEntry  

mscMpanlSigWindowSize 1.1.562.36.2.1.123.6.14.1.2
This attribute specifies the window size. This is the maximum number of unacknowledged sequenced frames that may be outstanding from or to this interface at any one time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..127  

mscMpanlSigRetransmitLimit 1.1.562.36.2.1.123.6.14.1.3
This attribute specifies the number of times a frame can be retransmitted by the SVC data link layer before appropriate recovery action is taken.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..20  

mscMpanlSigAckTimer 1.1.562.36.2.1.123.6.14.1.4
This attribute specifies the period in milliseconds that the network will wait for an acknowledgment to a sent frame. The value set for ackTimer must be less than the value set for idleProbeTimer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1000..10000  

mscMpanlSigAckDelayTimer 1.1.562.36.2.1.123.6.14.1.5
This attribute specifies the maximum period in milliseconds that the network will wait before sending an acknowledgment for a received in-sequence I-frame. A value of 0 means there will be no delay in acknowledgment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10000  

mscMpanlSigIdleProbeTimer 1.1.562.36.2.1.123.6.14.1.6
This attribute specifies the time period in milliseconds the link will be permitted to remain idle (that is, no frames are exchanged on the data link). Upon expiry of this timer, the network's side link layer polls its peer for status. The value set for idleProbeTimer must be greater than the value set for ackTimer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1000..65535000  

mscMpanlSigSvcaccTable 1.1.562.36.2.1.123.6.15
This group contains the provisionable attribute to define the defaultAccounting attribute..
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigSvcaccEntry

mscMpanlSigSvcaccEntry 1.1.562.36.2.1.123.6.15.1
An entry in the mscMpanlSigSvcaccTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigSvcaccEntry  

mscMpanlSigDefaultAccounting 1.1.562.36.2.1.123.6.15.1.1
This attribute specifies whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generation to be turned on, the defaultAccounting bit and at least one of the accountCollection bits in the FrsDataNetworkAddress component must be set to on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscMpanlSigStateTable 1.1.562.36.2.1.123.6.16
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigStateEntry

mscMpanlSigStateEntry 1.1.562.36.2.1.123.6.16.1
An entry in the mscMpanlSigStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigStateEntry  

mscMpanlSigAdminState 1.1.562.36.2.1.123.6.16.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscMpanlSigOperationalState 1.1.562.36.2.1.123.6.16.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscMpanlSigUsageState 1.1.562.36.2.1.123.6.16.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscMpanlSigStatsTable 1.1.562.36.2.1.123.6.17
This group contains the statistics related to the SVC signaling layer at the interface level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigStatsEntry

mscMpanlSigStatsEntry 1.1.562.36.2.1.123.6.17.1
An entry in the mscMpanlSigStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigStatsEntry  

mscMpanlSigCurrentNumberOfSvcCalls 1.1.562.36.2.1.123.6.17.1.1
This attribute shows the number of Frame Relay SVCs currently existing on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..991  

mscMpanlSigInCalls 1.1.562.36.2.1.123.6.17.1.4
This attribute indicates the current number of incoming SVCs on this interface (that is, the number of SVCs for which this interface represents the destination end of the call).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigInCallsRefused 1.1.562.36.2.1.123.6.17.1.5
This attribute counts the number of incoming SVC call requests that are rejected by either this interface or by the called user. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigOutCalls 1.1.562.36.2.1.123.6.17.1.6
This attribute shows the current number of outgoing SVCs on this interface (that is, the number of SVCs for which this interface represents the source end of the call).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigOutCallsFailed 1.1.562.36.2.1.123.6.17.1.7
This attribute counts the number of outgoing SVC call requests that are rejected by either this interface, or by the network side of the destination end, or by the called user. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigProtocolErrors 1.1.562.36.2.1.123.6.17.1.8
This attribute counts the number of times a Q.933 protocol error has occurred. Any one of the following events constitutes a protocol error: 1. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir, Bc and Be are all zero; 2. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir is zero but Bc is non-zero, or Bc is zero but Cir is non-zero; 3. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, the minimum acceptable Cir is greater than Cir; 4. At the destination end, any of the destination to source direction link layer core parameters has been increased in the CONNECT message from the called user; 5. At the destination end, the destination to source direction Cir in the CONNECT message is smaller than the corresponding minimum acceptable Cir signaled to the called user; 6. At the source end, any of the source to destination direction link layer core parameters in the CONNECT message from the destination end has been increased; 7. At the source end, the source to destination direction Cir, after negotiation, is smaller than the corresponding minimum acceptable Cir; 8. The network has received a STATUS message from the user with an incompatible Q.933 state. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigQualityOfServiceNotAvailable 1.1.562.36.2.1.123.6.17.1.9
This attribute counts the number of incoming and outgoing SVCs that are rejected because the quality of service requested cannot be met by the network. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigSetupTimeout 1.1.562.36.2.1.123.6.17.1.10
This attribute counts the number of times the T303 setup timer has expired. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigLastCauseInStatusMsgReceived 1.1.562.36.2.1.123.6.17.1.11
This attribute shows the cause value in the last received user's STATUS message to an existing call. The DLCI to which this STATUS message applies is specified in the lastDlciReceivedStatus attribute. The initial value of this attribute is 0 which means that no STATUS message has been received for an existing call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

mscMpanlSigLastStateInStatusMsgReceived 1.1.562.36.2.1.123.6.17.1.12
This attribute shows the state value in the last received user's STATUS message to an existing call. The DLCI to which this STATUS message applies is specified in the lastDlciReceivedStatus attribute. The initial value of this attribute is notApplicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null(0), callInitiated(1), n2(2), outgoingCallProceeding(3), n4(4), n5(5), callPresent(6), n7(7), n8(8), incomingCallProceeding(9), active(10), disconnectRequest(11), disconnectIndication(12), n13(13), n14(14), n15(15), n16(16), n17(17), n18(18), releaseRequest(19), notApplicable(20), n21(21), n22(22), n23(23), n24(24), n25(25), n26(26), n27(27), n28(28), n29(29), n30(30), n31(31), n32(32), n33(33), n34(34), n35(35), n36(36), n37(37), n38(38), n39(39), n40(40), n41(41), n42(42), n43(43), n44(44), n45(45), n46(46), n47(47), n48(48), n49(49), n50(50), n51(51), n52(52), n53(53), n54(54), n55(55), n56(56), n57(57), n58(58), n59(59), n60(60), n61(61), n62(62), n63(63)  

mscMpanlSigLastDlciReceivedStatus 1.1.562.36.2.1.123.6.17.1.13
This attribute shows the value of the DLCI that has most recently received a STATUS message from the user. The initial value of this attribute is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 17..1007  

mscMpanlSigLastQ933StateReceivedStatus 1.1.562.36.2.1.123.6.17.1.14
This attribute shows the network Q.933 state of the DLCI that has most recently received a STATUS message from the user. The DLCI to which this STATUS message applies is specified in the lastDlciReceivedStatus attribute. The initial value of this attribute is notApplicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null(0), callInitiated(1), outgoingCallProceeding(3), callPresent(6), incomingCallProceeding(9), active(10), disconnectRequest(11), disconnectIndication(12), releaseRequest(19), notApplicable(20)  

mscMpanlSigLastTimeMsgBlockCongested 1.1.562.36.2.1.123.6.17.1.15
This attribute displays the most recent time that an SVC DLCI has failed to get a message block due to message block congestion. Exceptional behavior can occur due to this. The DLCI that has most recently encountered this is indicated by the lastDlciWithMsgBlockCongestion attribute. However, all SVC DLCIs may be affected. The initial value of this attribute is 0000-00-00 00:00.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnterpriseDateAndTime Size(0|16)  

mscMpanlSigLastDlciWithMsgBlockCongestion 1.1.562.36.2.1.123.6.17.1.16
This attribute shows the value of the DLCI that has most recently failed to get a message block due to message block congestion. The initial value of this attribute is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 16..1007  

mscMpanlSigLapfStatusTable 1.1.562.36.2.1.123.6.18
This group contains the Q.922 SVC data link layer status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigLapfStatusEntry

mscMpanlSigLapfStatusEntry 1.1.562.36.2.1.123.6.18.1
An entry in the mscMpanlSigLapfStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigLapfStatusEntry  

mscMpanlSigCurrentState 1.1.562.36.2.1.123.6.18.1.1
This attribute shows the current state of the SVC data link layer interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disconnected(1), linkSetup(2), disconnectRequest(4), informationTransfer(5), waitingAck(7)  

mscMpanlSigLastStateChangeReason 1.1.562.36.2.1.123.6.18.1.2
This attribute shows the reason for the most recent state change. notStarted - this is the default state after SVC data link has just been created. abmeEntered - SVC data link has entered Asynchronous Balanced Mode after SABME or UA has been received. abmeReset - the data link has been reset. dmReceived - DM response received. dmSent - DM sent. discReceived - DISC response received. discSent - DISC sent. frmrReceived - FRMR received. n200RetranTimeOut - retransmitLimit has been exceeded. other - unspecified state change reasons. The most likely reason for this is the transition from state waitingAck to state informationTransfer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notStarted(1), abmeEntered(3), abmeReset(5), dmReceived(6), dmSent(7), discReceived(8), discSent(9), frmrReceived(10), n200RetranTimeOut(12), other(13)  

mscMpanlSigFrmrReceive 1.1.562.36.2.1.123.6.18.1.3
This attribute shows the information field of the FRMR most recently received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(0..8)  

mscMpanlSigCurrentQueueSize 1.1.562.36.2.1.123.6.18.1.4
This attribute shows the current number of frames in the SVC data link layer transmit queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigLapfStatsTable 1.1.562.36.2.1.123.6.19
This group contains the statistics for the SVC data link layer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigLapfStatsEntry

mscMpanlSigLapfStatsEntry 1.1.562.36.2.1.123.6.19.1
An entry in the mscMpanlSigLapfStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigLapfStatsEntry  

mscMpanlSigStateChange 1.1.562.36.2.1.123.6.19.1.1
This attribute counts the number of times the SVC data link layer interface has changed state. Frequent state changes may indicate a problem with the line quality. While the data link layer is in informationTransfer state, this counter will increment on each expiry of idleProbeTimer as its state goes from informationTransfer to waitingAck and back. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigRemoteBusy 1.1.562.36.2.1.123.6.19.1.2
This attribute counts the number of times transmission of an I-frame was unsuccessful due to a perceived remote busy condition (window closed or remote busy). When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigReceiveRejectFrame 1.1.562.36.2.1.123.6.19.1.3
This attribute counts the number of REJ frames received by the interface. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigAckTimeout 1.1.562.36.2.1.123.6.19.1.4
This attribute counts the number of times the ackTimer has expired. Frequent increments of this counter indicate a problem at the link or improper values have been chosen for ackTimer and ackDelayTimer between the local and remote sides. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigIFramesTransmitted 1.1.562.36.2.1.123.6.19.1.5
This attribute counts the number of SVC I-frames transmitted to the interface on DLCI 0. An I-frame may be counted more than once if there are retransmissions at the SVC data link layer. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigIFramesTxDiscarded 1.1.562.36.2.1.123.6.19.1.6
This attribute counts the number of SVC I-frames that are bound for the link but have been discarded. Discard reasons may be one of the following: 1. the frame length is beyond allow limit. 2. the SVC data link layer is in disconnected state. 3. the transmit queue has been purged because the queue length has reached the reset threshold. 4. the transmit queue or the queue waiting for acknowledgment has been purged because the link cannot be re-established. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigIFramesReceived 1.1.562.36.2.1.123.6.19.1.7
This attribute counts the number of SVC I-frames received from the interface. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigIFramesRcvdDiscarded 1.1.562.36.2.1.123.6.19.1.8
This attribute counts the number of SVC I-frames received but have been discarded. The discard reasons are: 1. incorrect frame size 2. frame is out of sequence 3. frame received while the network side of the SVC data link layer is not in the informationTransfer or waitingAck state. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanl 1.1.562.36.2.1.123.7
OBJECT IDENTIFIER    

mscMpanlSigMpanlRowStatusTable 1.1.562.36.2.1.123.7.1
This entry controls the addition and deletion of mscMpanlSigMpanl components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigMpanlRowStatusEntry

mscMpanlSigMpanlRowStatusEntry 1.1.562.36.2.1.123.7.1.1
A single entry in the table represents a single mscMpanlSigMpanl component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigMpanlRowStatusEntry  

mscMpanlSigMpanlRowStatus 1.1.562.36.2.1.123.7.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlSigMpanl components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMpanlSigMpanlComponentName 1.1.562.36.2.1.123.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlSigMpanlStorageType 1.1.562.36.2.1.123.7.1.1.4
This variable represents the storage type value for the mscMpanlSigMpanl tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlSigMpanlIndex 1.1.562.36.2.1.123.7.1.1.10
This variable represents the index for the mscMpanlSigMpanl tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlSigMpanlStateTable 1.1.562.36.2.1.123.7.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigMpanlStateEntry

mscMpanlSigMpanlStateEntry 1.1.562.36.2.1.123.7.10.1
An entry in the mscMpanlSigMpanlStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigMpanlStateEntry  

mscMpanlSigMpanlAdminState 1.1.562.36.2.1.123.7.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscMpanlSigMpanlOperationalState 1.1.562.36.2.1.123.7.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscMpanlSigMpanlUsageState 1.1.562.36.2.1.123.7.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscMpanlSigMpanlProfileTable 1.1.562.36.2.1.123.7.11
This group contains attributes which are populated by the information received from the MPA in the Profile Association command of the MPANL protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigMpanlProfileEntry

mscMpanlSigMpanlProfileEntry 1.1.562.36.2.1.123.7.11.1
An entry in the mscMpanlSigMpanlProfileTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigMpanlProfileEntry  

mscMpanlSigMpanlDteCustomerId 1.1.562.36.2.1.123.7.11.1.1
This attribute indicates the Customer ID of the MPA connected to this Mpanl interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscMpanlSigMpanlDteNodeId 1.1.562.36.2.1.123.7.11.1.2
This attribute indicates the nodeId that uniquely identifies the MPA connected to this Mpanl interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4095  

mscMpanlSigMpanlDteComponentName 1.1.562.36.2.1.123.7.11.1.3
This attribute indicates the component name provided by the MPA connected to this MPANL interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..255)  

mscMpanlSigMpanlHighestDlci 1.1.562.36.2.1.123.7.11.1.4
This gives the highest DLCI that the Mpanl interface will assign to an SVC. This value is populated by information provided in the DLCI Range Information Element of the MPANL Profile Association command received from the MPA.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 17..1007  

mscMpanlSigMpanlStatsTable 1.1.562.36.2.1.123.7.12
This group contains the statistics related to the Mpanl signaling layer at the interface level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigMpanlStatsEntry

mscMpanlSigMpanlStatsEntry 1.1.562.36.2.1.123.7.12.1
An entry in the mscMpanlSigMpanlStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigMpanlStatsEntry  

mscMpanlSigMpanlProtocolErrors 1.1.562.36.2.1.123.7.12.1.1
This attribute counts the number of times an Mpanl protocol error has occurred. Any one of the following events constitutes a protocol error: 1. DNA association before profile association. 2. Mandatory IE absent in SAPcommands. 3. Invalid length of IE/sub-info fields in SAP command. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlSap0CommandsRx 1.1.562.36.2.1.123.7.12.1.2
This attribute counts the number of SAP-0 commands received on the MPANL DLCI 16. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlSap0CommandsTx 1.1.562.36.2.1.123.7.12.1.3
This attribute counts the number of SAP-0 commands sent on the MPANL DLCI 16. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlSapXCommandsRx 1.1.562.36.2.1.123.7.12.1.4
This attribute counts the number of SAP-X commands received on the MPANL DLCI 16. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlSapXCommandsTx 1.1.562.36.2.1.123.7.12.1.5
This attribute counts the number of SAP-X commands sent on the MPANL DLCI 16. This counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlLapfStatusTable 1.1.562.36.2.1.123.7.13
This group contains the Q.922 SVC data link layer status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigMpanlLapfStatusEntry

mscMpanlSigMpanlLapfStatusEntry 1.1.562.36.2.1.123.7.13.1
An entry in the mscMpanlSigMpanlLapfStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigMpanlLapfStatusEntry  

mscMpanlSigMpanlCurrentState 1.1.562.36.2.1.123.7.13.1.1
This attribute shows the current state of the SVC data link layer interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disconnected(1), linkSetup(2), disconnectRequest(4), informationTransfer(5), waitingAck(7)  

mscMpanlSigMpanlLastStateChangeReason 1.1.562.36.2.1.123.7.13.1.2
This attribute shows the reason for the most recent state change. notStarted - this is the default state after SVC data link has just been created. abmeEntered - SVC data link has entered Asynchronous Balanced Mode after SABME or UA has been received. abmeReset - the data link has been reset. dmReceived - DM response received. dmSent - DM sent. discReceived - DISC response received. discSent - DISC sent. frmrReceived - FRMR received. n200RetranTimeOut - retransmitLimit has been exceeded. other - unspecified state change reasons. The most likely reason for this is the transition from state waitingAck to state informationTransfer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notStarted(1), abmeEntered(3), abmeReset(5), dmReceived(6), dmSent(7), discReceived(8), discSent(9), frmrReceived(10), n200RetranTimeOut(12), other(13)  

mscMpanlSigMpanlFrmrReceive 1.1.562.36.2.1.123.7.13.1.3
This attribute shows the information field of the FRMR most recently received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(0..8)  

mscMpanlSigMpanlCurrentQueueSize 1.1.562.36.2.1.123.7.13.1.4
This attribute shows the current number of frames in the SVC data link layer transmit queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlLapfStatsTable 1.1.562.36.2.1.123.7.14
This group contains the statistics for the SVC data link layer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlSigMpanlLapfStatsEntry

mscMpanlSigMpanlLapfStatsEntry 1.1.562.36.2.1.123.7.14.1
An entry in the mscMpanlSigMpanlLapfStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlSigMpanlLapfStatsEntry  

mscMpanlSigMpanlStateChange 1.1.562.36.2.1.123.7.14.1.1
This attribute counts the number of times the SVC data link layer interface has changed state. Frequent state changes may indicate a problem with the line quality. While the data link layer is in informationTransfer state, this counter will increment on each expiry of idleProbeTimer as its state goes from informationTransfer to waitingAck and back. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlRemoteBusy 1.1.562.36.2.1.123.7.14.1.2
This attribute counts the number of times transmission of an I-frame was unsuccessful due to a perceived remote busy condition (window closed or remote busy). When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlReceiveRejectFrame 1.1.562.36.2.1.123.7.14.1.3
This attribute counts the number of REJ frames received by the interface. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlAckTimeout 1.1.562.36.2.1.123.7.14.1.4
This attribute counts the number of times the ackTimer has expired. Frequent increments of this counter indicate a problem at the link or improper values have been chosen for ackTimer and ackDelayTimer between the local and remote sides. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlIFramesTransmitted 1.1.562.36.2.1.123.7.14.1.5
This attribute counts the number of SVC I-frames transmitted to the interface on DLCI 0. An I-frame may be counted more than once if there are retransmissions at the SVC data link layer. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlIFramesTxDiscarded 1.1.562.36.2.1.123.7.14.1.6
This attribute counts the number of SVC I-frames that are bound for the link but have been discarded. Discard reasons may be one of the following: 1. the frame length is beyond allow limit. 2. the SVC data link layer is in disconnected state. 3. the transmit queue has been purged because the queue length has reached the reset threshold. 4. the transmit queue or the queue waiting for acknowledgment has been purged because the link cannot be re-established. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlIFramesReceived 1.1.562.36.2.1.123.7.14.1.7
This attribute counts the number of SVC I-frames received from the interface. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlSigMpanlIFramesRcvdDiscarded 1.1.562.36.2.1.123.7.14.1.8
This attribute counts the number of SVC I-frames received but have been discarded. The discard reasons are: 1. incorrect frame size 2. frame is out of sequence 3. frame received while the network side of the SVC data link layer is not in the informationTransfer or waitingAck state. When this count reaches maximum, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlLmi 1.1.562.36.2.1.123.8
OBJECT IDENTIFIER    

mscMpanlLmiRowStatusTable 1.1.562.36.2.1.123.8.1
This entry controls the addition and deletion of mscMpanlLmi components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlLmiRowStatusEntry

mscMpanlLmiRowStatusEntry 1.1.562.36.2.1.123.8.1.1
A single entry in the table represents a single mscMpanlLmi component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlLmiRowStatusEntry  

mscMpanlLmiRowStatus 1.1.562.36.2.1.123.8.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlLmi components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMpanlLmiComponentName 1.1.562.36.2.1.123.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlLmiStorageType 1.1.562.36.2.1.123.8.1.1.4
This variable represents the storage type value for the mscMpanlLmi tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlLmiIndex 1.1.562.36.2.1.123.8.1.1.10
This variable represents the index for the mscMpanlLmi tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlLmiParmsTable 1.1.562.36.2.1.123.8.10
This group contains the provisionable attributes of the Local Management Interface component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlLmiParmsEntry

mscMpanlLmiParmsEntry 1.1.562.36.2.1.123.8.10.1
An entry in the mscMpanlLmiParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlLmiParmsEntry  

mscMpanlLmiProcedures 1.1.562.36.2.1.123.8.10.1.1
This attribute selects the procedures to be used for the Local Management Interface. For the MPANL service this attribute is always set to none. none : no Local Management Interface procedures are running on this interface. This accomodates MPANL user equipment that have not implemented any LMI procedures. The remaining attributes of this group will be ignored. vendorForum : Local Management Interface procedures from the Vendor Forum specification are supported on this interface. DLCI 1023 is used for the LMI protocol. ansi: Local Management Interface procedures from the ANSI specification are supported. DLCI 0 is used for the LMI protocol. ccitt: Local Management Interface procedures from the CCITT specification are supported. DLCI 0 is used for the LMI protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), vendorForum(1), ansi(2), ccitt(3)  

mscMpanlLmiStateTable 1.1.562.36.2.1.123.8.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlLmiStateEntry

mscMpanlLmiStateEntry 1.1.562.36.2.1.123.8.12.1
An entry in the mscMpanlLmiStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlLmiStateEntry  

mscMpanlLmiAdminState 1.1.562.36.2.1.123.8.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscMpanlLmiOperationalState 1.1.562.36.2.1.123.8.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscMpanlLmiUsageState 1.1.562.36.2.1.123.8.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscMpanlVoFr 1.1.562.36.2.1.123.18
OBJECT IDENTIFIER    

mscMpanlVoFrRowStatusTable 1.1.562.36.2.1.123.18.1
This entry controls the addition and deletion of mscMpanlVoFr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlVoFrRowStatusEntry

mscMpanlVoFrRowStatusEntry 1.1.562.36.2.1.123.18.1.1
A single entry in the table represents a single mscMpanlVoFr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlVoFrRowStatusEntry  

mscMpanlVoFrRowStatus 1.1.562.36.2.1.123.18.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlVoFr components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMpanlVoFrComponentName 1.1.562.36.2.1.123.18.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlVoFrStorageType 1.1.562.36.2.1.123.18.1.1.4
This variable represents the storage type value for the mscMpanlVoFr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlVoFrIndex 1.1.562.36.2.1.123.18.1.1.10
This variable represents the index for the mscMpanlVoFr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlVoFrOperTable 1.1.562.36.2.1.123.18.10
This group contains operational attributes of the VoFr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlVoFrOperEntry

mscMpanlVoFrOperEntry 1.1.562.36.2.1.123.18.10.1
An entry in the mscMpanlVoFrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlVoFrOperEntry  

mscMpanlVoFrMaximumFrameSize 1.1.562.36.2.1.123.18.10.1.1
This attribute indicates the maximum size of VoFr frames transmitted to MPA. The size excludes HDLC flags and CRC octets. MPA signals the required value as part of the MPANL initial staging, which is then used to set the value of this attribute. Default value is used before MPANL staging is completed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlVoFrTransmitInformationRate 1.1.562.36.2.1.123.18.10.1.2
This attribute indicates the maximum information rate towards MPA. Value may change over time, as signalled by MPA. Default value is used before MPANL staging is completed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlVoFrStatsTable 1.1.562.36.2.1.123.18.11
This group contains statistics attributes of the VoFr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlVoFrStatsEntry

mscMpanlVoFrStatsEntry 1.1.562.36.2.1.123.18.11.1
An entry in the mscMpanlVoFrStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlVoFrStatsEntry  

mscMpanlVoFrFragmentedHighestPriorityFrames 1.1.562.36.2.1.123.18.11.1.1
This attribute counts egress frames with the highest priority, which had to be fragmented because they were larger than maximumFrameSize. This could happen when a data call is setup to use the highest emission priority, or MPA is provisioned with too low maximum frame size. When the maximum is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlVoFrLostFragmentsFromIf 1.1.562.36.2.1.123.18.11.1.5
This attribute counts lost VoFr fragments from the interface. Presence of lost fragments indicates a link problem. Note that lost whole frames cannot be detected. When the maximum is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlVoFrProtocolViolationsFromIf 1.1.562.36.2.1.123.18.11.1.6
This attribute counts VoFr protocol violations detected in the data from the interface. When the maximum is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscMpanlFrMuxSetup 1.1.562.36.2.1.123.19
OBJECT IDENTIFIER    

mscMpanlFrMuxSetupRowStatusTable 1.1.562.36.2.1.123.19.1
This entry controls the addition and deletion of mscMpanlFrMuxSetup components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlFrMuxSetupRowStatusEntry

mscMpanlFrMuxSetupRowStatusEntry 1.1.562.36.2.1.123.19.1.1
A single entry in the table represents a single mscMpanlFrMuxSetup component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlFrMuxSetupRowStatusEntry  

mscMpanlFrMuxSetupRowStatus 1.1.562.36.2.1.123.19.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlFrMuxSetup components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscMpanlFrMuxSetupComponentName 1.1.562.36.2.1.123.19.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlFrMuxSetupStorageType 1.1.562.36.2.1.123.19.1.1.4
This variable represents the storage type value for the mscMpanlFrMuxSetup tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlFrMuxSetupIndex 1.1.562.36.2.1.123.19.1.1.10
This variable represents the index for the mscMpanlFrMuxSetup tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlFrMuxSetupOpTable 1.1.562.36.2.1.123.19.11
This group contains the following operational parameters: committedInformationRate of the PVC connection used for tunnelling the MPANL traffic, and the component name of the Dlci which carries the traffic for this MPANL.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlFrMuxSetupOpEntry

mscMpanlFrMuxSetupOpEntry 1.1.562.36.2.1.123.19.11.1
An entry in the mscMpanlFrMuxSetupOpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlFrMuxSetupOpEntry  

mscMpanlFrMuxSetupCommittedInformationRate 1.1.562.36.2.1.123.19.11.1.1
This attribute specifies, in bit/s, the committed information rate (CIR) to which the traffic transmitted towards the interface is shaped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 16000..4294967295  

mscMpanlFrMuxSetupDlciCompName 1.1.562.36.2.1.123.19.11.1.2
This attribute specifies the component name of the Dlci with which the application using this FrMuxSetup component is associated. The name is a string FrMux/n Dlci/m. For a PVC this is the same component name as provisioned under the subcomponent FrMuxPvcSetup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

mscMpanlFrMuxSetupPvcSetup 1.1.562.36.2.1.123.19.2
OBJECT IDENTIFIER    

mscMpanlFrMuxSetupPvcSetupRowStatusTable 1.1.562.36.2.1.123.19.2.1
This entry controls the addition and deletion of mscMpanlFrMuxSetupPvcSetup components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlFrMuxSetupPvcSetupRowStatusEntry

mscMpanlFrMuxSetupPvcSetupRowStatusEntry 1.1.562.36.2.1.123.19.2.1.1
A single entry in the table represents a single mscMpanlFrMuxSetupPvcSetup component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlFrMuxSetupPvcSetupRowStatusEntry  

mscMpanlFrMuxSetupPvcSetupRowStatus 1.1.562.36.2.1.123.19.2.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlFrMuxSetupPvcSetup components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscMpanlFrMuxSetupPvcSetupComponentName 1.1.562.36.2.1.123.19.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlFrMuxSetupPvcSetupStorageType 1.1.562.36.2.1.123.19.2.1.1.4
This variable represents the storage type value for the mscMpanlFrMuxSetupPvcSetup tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlFrMuxSetupPvcSetupIndex 1.1.562.36.2.1.123.19.2.1.1.10
This variable represents the index for the mscMpanlFrMuxSetupPvcSetup tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlFrMuxSetupPvcSetupProvTable 1.1.562.36.2.1.123.19.2.10
This group contains provisionable attributes for setting up a Dlci associated with the application using the FrMuxSetup component. The Dlci is of the PVC type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlFrMuxSetupPvcSetupProvEntry

mscMpanlFrMuxSetupPvcSetupProvEntry 1.1.562.36.2.1.123.19.2.10.1
An entry in the mscMpanlFrMuxSetupPvcSetupProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlFrMuxSetupPvcSetupProvEntry  

mscMpanlFrMuxSetupPvcSetupDlciName 1.1.562.36.2.1.123.19.2.10.1.1
This attribute is the link to the Dlci which is associated with the application using the FrMuxSetup component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

mscMpanlIsdn 1.1.562.36.2.1.123.22
OBJECT IDENTIFIER    

mscMpanlIsdnRowStatusTable 1.1.562.36.2.1.123.22.1
This entry controls the addition and deletion of mscMpanlIsdn components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlIsdnRowStatusEntry

mscMpanlIsdnRowStatusEntry 1.1.562.36.2.1.123.22.1.1
A single entry in the table represents a single mscMpanlIsdn component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlIsdnRowStatusEntry  

mscMpanlIsdnRowStatus 1.1.562.36.2.1.123.22.1.1.1
This variable is used as the basis for SNMP naming of mscMpanlIsdn components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscMpanlIsdnComponentName 1.1.562.36.2.1.123.22.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscMpanlIsdnStorageType 1.1.562.36.2.1.123.22.1.1.4
This variable represents the storage type value for the mscMpanlIsdn tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscMpanlIsdnIndex 1.1.562.36.2.1.123.22.1.1.10
This variable represents the index for the mscMpanlIsdn tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscMpanlIsdnProvTable 1.1.562.36.2.1.123.22.11
This group contains the provisionable attributes of the Isdn component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlIsdnProvEntry

mscMpanlIsdnProvEntry 1.1.562.36.2.1.123.22.11.1
An entry in the mscMpanlIsdnProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlIsdnProvEntry  

mscMpanlIsdnT320 1.1.562.36.2.1.123.22.11.1.1
This attribute specifies the waiting time for a silent B-Channel (no active VCs associated with the Mpanl) to be disconnected and made available. Default is 60 seconds. 0 means t320 will never timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

mscMpanlIsdnAddressSignalling 1.1.562.36.2.1.123.22.11.1.2
This attribute defines whether the ISDN Calling Party Number is to be signalled to the remote DTE during an SVC call establishment. Otherwise, no changes to the current behavior of SVC call establishement (i.e., Passport Dna is used in the calling party number information element).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER isdnDna(0), normalBehavior(1)  

mscMpanlIsdnOperTable 1.1.562.36.2.1.123.22.12
This group contains the operational attributes of the Isdn component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscMpanlIsdnOperEntry

mscMpanlIsdnOperEntry 1.1.562.36.2.1.123.22.12.1
An entry in the mscMpanlIsdnOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscMpanlIsdnOperEntry  

mscMpanlIsdnDataSigChan 1.1.562.36.2.1.123.22.12.1.1
This attribute indicates the instance number of the dataSigChan component controlling the allocation of this Mpanl Isdn component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mscMpanlIsdnBChannelState 1.1.562.36.2.1.123.22.12.1.2
This attribute indicates the state of the B-Channel. If the value is idle it means that no VCs are connected and this B-Channel is available. If the value is busy it means this B-Channel has been allocated and is not available. If the value is disabled it means the application interface or the port is locked or disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), busy(1), disabled(2)  

mscMpanlIsdnLastUsedCgpn 1.1.562.36.2.1.123.22.12.1.3
This attribute indicates the calling party number currently using the B-Channel. When the B-Channel is free, the null string is displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DigitString Size(0..15)  

mscMpanlIsdnBChanIntState 1.1.562.36.2.1.123.22.12.1.4
Debug information
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isdnInit(0), waitAccEnable(1), waitLnsResponse(2), waitFramerData(3), enabling(4), waitAccRegAck(5), up(6), down(7), releasing(8)  

mscMpanlIsdnActiveVirtualCircuitsCount 1.1.562.36.2.1.123.22.12.1.5
Current number of virtual circuits (switched and permanent) in data transfer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mpaNetworkLinkGroup 1.1.562.36.2.2.119.1
OBJECT IDENTIFIER    

mpaNetworkLinkGroupCA 1.1.562.36.2.2.119.1.1
OBJECT IDENTIFIER    

mpaNetworkLinkGroupCA02 1.1.562.36.2.2.119.1.1.3
OBJECT IDENTIFIER    

mpaNetworkLinkGroupCA02A 1.1.562.36.2.2.119.1.1.3.2
OBJECT IDENTIFIER    

mpaNetworkLinkCapabilities 1.1.562.36.2.2.119.3
OBJECT IDENTIFIER    

mpaNetworkLinkCapabilitiesCA 1.1.562.36.2.2.119.3.1
OBJECT IDENTIFIER    

mpaNetworkLinkCapabilitiesCA02 1.1.562.36.2.2.119.3.1.3
OBJECT IDENTIFIER    

mpaNetworkLinkCapabilitiesCA02A 1.1.562.36.2.2.119.3.1.3.2
OBJECT IDENTIFIER