Nortel-MsCarrier-MscPassport-PppMIB

File: Nortel-MsCarrier-MscPassport-PppMIB.mib (90698 bytes)

Imported modules

RFC-1212	Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB	Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE	mscPassportMIBs	mscComponents
Counter32	DisplayString	StorageType
RowStatus	InterfaceIndex	Gauge32
Integer32	Unsigned32	NonReplicated
Link

Defined Types

MscPppRowStatusEntry
SEQUENCE
	mscPppRowStatus	RowStatus
	mscPppComponentName	DisplayString
	mscPppStorageType	StorageType
	mscPppIndex	Integer32

MscPppCidDataEntry
SEQUENCE
	mscPppCustomerIdentifier	Unsigned32

MscPppIfEntryEntry
SEQUENCE
	mscPppIfAdminStatus	INTEGER
	mscPppIfIndex	InterfaceIndex

MscPppMpEntry
SEQUENCE
	mscPppLinkToProtocolPort	Link

MscPppStateEntry
SEQUENCE
	mscPppAdminState	INTEGER
	mscPppOperationalState	INTEGER
	mscPppUsageState	INTEGER

MscPppOperStatusEntry
SEQUENCE
	mscPppSnmpOperStatus	INTEGER

MscPppLnkRowStatusEntry
SEQUENCE
	mscPppLnkRowStatus	RowStatus
	mscPppLnkComponentName	DisplayString
	mscPppLnkStorageType	StorageType
	mscPppLnkIndex	NonReplicated

MscPppLnkProvEntry
SEQUENCE
	mscPppLnkConfigInitialMru	Unsigned32
	mscPppLnkConfigMagicNumber	INTEGER
	mscPppLnkRestartTimer	Unsigned32
	mscPppLnkContinuityMonitor	INTEGER
	mscPppLnkNegativeAckTries	Unsigned32
	mscPppLnkQualityThreshold	Unsigned32
	mscPppLnkQualityWindow	Unsigned32
	mscPppLnkTerminateRequestTries	Unsigned32
	mscPppLnkConfigureRequestTries	Unsigned32

MscPppLnkOperEntry
SEQUENCE
	mscPppLnkOperState	INTEGER
	mscPppLnkLineCondition	INTEGER
	mscPppLnkBadAddresses	Counter32
	mscPppLnkBadControls	Counter32
	mscPppLnkPacketTooLongs	Counter32
	mscPppLnkBadFcss	Counter32
	mscPppLnkLocalMru	Unsigned32
	mscPppLnkRemoteMru	Unsigned32
	mscPppLnkTransmitFcsSize	Unsigned32
	mscPppLnkReceiveFcsSize	Unsigned32

MscPppLqmRowStatusEntry
SEQUENCE
	mscPppLqmRowStatus	RowStatus
	mscPppLqmComponentName	DisplayString
	mscPppLqmStorageType	StorageType
	mscPppLqmIndex	NonReplicated

MscPppLqmProvEntry
SEQUENCE
	mscPppLqmConfigPeriod	Unsigned32
	mscPppLqmConfigStatus	INTEGER

MscPppLqmOperEntry
SEQUENCE
	mscPppLqmQuality	INTEGER
	mscPppLqmInGoodOctets	Counter32
	mscPppLqmLocalPeriod	Unsigned32
	mscPppLqmRemotePeriod	Unsigned32
	mscPppLqmOutLqrs	Counter32
	mscPppLqmInLqrs	Counter32

MscPppNcpRowStatusEntry
SEQUENCE
	mscPppNcpRowStatus	RowStatus
	mscPppNcpComponentName	DisplayString
	mscPppNcpStorageType	StorageType
	mscPppNcpIndex	NonReplicated

MscPppNcpBprovEntry
SEQUENCE
	mscPppNcpBConfigTinygram	INTEGER
	mscPppNcpBConfigLanId	INTEGER

MscPppNcpIpOperEntry
SEQUENCE
	mscPppNcpIpOperState	INTEGER

MscPppNcpBoperEntry
SEQUENCE
	mscPppNcpBOperState	INTEGER
	mscPppNcpBLocalToRemoteTinygramComp	INTEGER
	mscPppNcpBRemoteToLocalTinygramComp	INTEGER
	mscPppNcpBLocalToRemoteLanId	INTEGER
	mscPppNcpBRemoteToLocalLanId	INTEGER

MscPppNcpOperEntry
SEQUENCE
	mscPppNcpAppletalkOperState	INTEGER
	mscPppNcpIpxOperState	INTEGER
	mscPppNcpXnsOperState	INTEGER
	mscPppNcpDecnetOperState	INTEGER

MscPppNcpBmcEntryRowStatusEntry
SEQUENCE
	mscPppNcpBmcEntryRowStatus	RowStatus
	mscPppNcpBmcEntryComponentName	DisplayString
	mscPppNcpBmcEntryStorageType	StorageType
	mscPppNcpBmcEntryMacTypeIndex	INTEGER

MscPppNcpBmcEntryProvEntry
SEQUENCE
	mscPppNcpBmcEntryLocalStatus	INTEGER

MscPppNcpBmEntryRowStatusEntry
SEQUENCE
	mscPppNcpBmEntryRowStatus	RowStatus
	mscPppNcpBmEntryComponentName	DisplayString
	mscPppNcpBmEntryStorageType	StorageType
	mscPppNcpBmEntryMacTypeIndex	INTEGER

MscPppNcpBmEntryOperEntry
SEQUENCE
	mscPppNcpBmEntryLocalStatus	INTEGER
	mscPppNcpBmEntryRemoteStatus	INTEGER

MscPppFramerRowStatusEntry
SEQUENCE
	mscPppFramerRowStatus	RowStatus
	mscPppFramerComponentName	DisplayString
	mscPppFramerStorageType	StorageType
	mscPppFramerIndex	NonReplicated

MscPppFramerProvEntry
SEQUENCE
	mscPppFramerInterfaceName	Link

MscPppFramerStateEntry
SEQUENCE
	mscPppFramerAdminState	INTEGER
	mscPppFramerOperationalState	INTEGER
	mscPppFramerUsageState	INTEGER

MscPppFramerStatsEntry
SEQUENCE
	mscPppFramerFrmToIf	Counter32
	mscPppFramerFrmFromIf	Counter32
	mscPppFramerAborts	Counter32
	mscPppFramerCrcErrors	Counter32
	mscPppFramerLrcErrors	Counter32
	mscPppFramerNonOctetErrors	Counter32
	mscPppFramerOverruns	Counter32
	mscPppFramerUnderruns	Counter32
	mscPppFramerLargeFrmErrors	Counter32

MscPppFramerUtilEntry
SEQUENCE
	mscPppFramerNormPrioLinkUtilToIf	Gauge32
	mscPppFramerNormPrioLinkUtilFromIf	Gauge32

MscPppLeqRowStatusEntry
SEQUENCE
	mscPppLeqRowStatus	RowStatus
	mscPppLeqComponentName	DisplayString
	mscPppLeqStorageType	StorageType
	mscPppLeqIndex	NonReplicated

MscPppLeqProvEntry
SEQUENCE
	mscPppLeqMaxPackets	Unsigned32
	mscPppLeqMaxMsecData	Unsigned32
	mscPppLeqMaxPercentMulticast	Unsigned32
	mscPppLeqTimeToLive	Unsigned32

MscPppLeqStatsEntry
SEQUENCE
	mscPppLeqTimedOutPkt	Counter32
	mscPppLeqHardwareForcedPkt	Counter32
	mscPppLeqForcedPktDiscards	Counter32
	mscPppLeqQueuePurgeDiscards	Counter32

MscPppLeqTStatsEntry
SEQUENCE
	mscPppLeqTotalPktHandled	Counter32
	mscPppLeqTotalPktForwarded	Counter32
	mscPppLeqTotalPktQueued	Counter32
	mscPppLeqTotalMulticastPkt	Counter32
	mscPppLeqTotalPktDiscards	Counter32

MscPppLeqCStatsEntry
SEQUENCE
	mscPppLeqCurrentPktQueued	Gauge32
	mscPppLeqCurrentBytesQueued	Gauge32
	mscPppLeqCurrentMulticastQueued	Gauge32

MscPppLeqThrStatsEntry
SEQUENCE
	mscPppLeqQueuePktThreshold	Unsigned32
	mscPppLeqPktThresholdExceeded	Counter32
	mscPppLeqQueueByteThreshold	Unsigned32
	mscPppLeqByteThresholdExceeded	Counter32
	mscPppLeqQueueMulticastThreshold	Unsigned32
	mscPppLeqMulThresholdExceeded	Counter32
	mscPppLeqMemThresholdExceeded	Counter32

Defined Values

pppMIB		1.3.6.1.4.1.562.36.2.2.33
OBJECT IDENTIFIER

mscPpp		1.3.6.1.4.1.562.36.2.1.102
OBJECT IDENTIFIER

mscPppRowStatusTable		1.3.6.1.4.1.562.36.2.1.102.1
This entry controls the addition and deletion of mscPpp components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppRowStatusEntry

mscPppRowStatusEntry		1.3.6.1.4.1.562.36.2.1.102.1.1
A single entry in the table represents a single mscPpp component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppRowStatusEntry

mscPppRowStatus		1.3.6.1.4.1.562.36.2.1.102.1.1.1
This variable is used as the basis for SNMP naming of mscPpp components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

mscPppComponentName		1.3.6.1.4.1.562.36.2.1.102.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscPppStorageType		1.3.6.1.4.1.562.36.2.1.102.1.1.4
This variable represents the storage type value for the mscPpp tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscPppIndex		1.3.6.1.4.1.562.36.2.1.102.1.1.10
This variable represents the index for the mscPpp tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

mscPppCidDataTable		1.3.6.1.4.1.562.36.2.1.102.20
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppCidDataEntry

mscPppCidDataEntry		1.3.6.1.4.1.562.36.2.1.102.20.1
An entry in the mscPppCidDataTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppCidDataEntry

mscPppCustomerIdentifier		1.3.6.1.4.1.562.36.2.1.102.20.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0 \| 1..8191

mscPppIfEntryTable		1.3.6.1.4.1.562.36.2.1.102.21
This group contains the provisionable attributes for the ifEntry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppIfEntryEntry

mscPppIfEntryEntry		1.3.6.1.4.1.562.36.2.1.102.21.1
An entry in the mscPppIfEntryTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppIfEntryEntry

mscPppIfAdminStatus		1.3.6.1.4.1.562.36.2.1.102.21.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	up(1), down(2), testing(3)

mscPppIfIndex		1.3.6.1.4.1.562.36.2.1.102.21.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
Status: mandatory	Access: read-only
OBJECT-TYPE
	InterfaceIndex	1..65535

mscPppMpTable		1.3.6.1.4.1.562.36.2.1.102.22
This group contains the base provisioning data for the Media Application component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppMpEntry

mscPppMpEntry		1.3.6.1.4.1.562.36.2.1.102.22.1
An entry in the mscPppMpTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppMpEntry

mscPppLinkToProtocolPort		1.3.6.1.4.1.562.36.2.1.102.22.1.1
This attribute contains a protocol port component name. The attribute associates the application with a protocol port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Link

mscPppStateTable		1.3.6.1.4.1.562.36.2.1.102.23
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppStateEntry

mscPppStateEntry		1.3.6.1.4.1.562.36.2.1.102.23.1
An entry in the mscPppStateTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppStateEntry

mscPppAdminState		1.3.6.1.4.1.562.36.2.1.102.23.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	locked(0), unlocked(1), shuttingDown(2)

mscPppOperationalState		1.3.6.1.4.1.562.36.2.1.102.23.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

mscPppUsageState		1.3.6.1.4.1.562.36.2.1.102.23.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(0), active(1), busy(2)

mscPppOperStatusTable		1.3.6.1.4.1.562.36.2.1.102.24
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppOperStatusEntry

mscPppOperStatusEntry		1.3.6.1.4.1.562.36.2.1.102.24.1
An entry in the mscPppOperStatusTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppOperStatusEntry

mscPppSnmpOperStatus		1.3.6.1.4.1.562.36.2.1.102.24.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2), testing(3)

mscPppLnk		1.3.6.1.4.1.562.36.2.1.102.2
OBJECT IDENTIFIER

mscPppLnkRowStatusTable		1.3.6.1.4.1.562.36.2.1.102.2.1
This entry controls the addition and deletion of mscPppLnk components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppLnkRowStatusEntry

mscPppLnkRowStatusEntry		1.3.6.1.4.1.562.36.2.1.102.2.1.1
A single entry in the table represents a single mscPppLnk component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppLnkRowStatusEntry

mscPppLnkRowStatus		1.3.6.1.4.1.562.36.2.1.102.2.1.1.1
This variable is used as the basis for SNMP naming of mscPppLnk components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

mscPppLnkComponentName		1.3.6.1.4.1.562.36.2.1.102.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscPppLnkStorageType		1.3.6.1.4.1.562.36.2.1.102.2.1.1.4
This variable represents the storage type value for the mscPppLnk tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscPppLnkIndex		1.3.6.1.4.1.562.36.2.1.102.2.1.1.10
This variable represents the index for the mscPppLnk tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscPppLnkProvTable		1.3.6.1.4.1.562.36.2.1.102.2.10
This group contains the provisioned attributes for the Ppp Link component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppLnkProvEntry

mscPppLnkProvEntry		1.3.6.1.4.1.562.36.2.1.102.2.10.1
An entry in the mscPppLnkProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppLnkProvEntry

mscPppLnkConfigInitialMru		1.3.6.1.4.1.562.36.2.1.102.2.10.1.1
This is the initial Maximum Receive Unit (Mru) that the local Ppp entity will advertise to the remote entity. A change to this attribute will not take effect until Ppp is restarted (lock/unlock).
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	68..18000

mscPppLnkConfigMagicNumber		1.3.6.1.4.1.562.36.2.1.102.2.10.1.4
If enabled then the local node will attempt to perform Magic Number negotiation with the remote node. If disabled then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote node, per the Ppp specification. A change to this attribute will not take effect until Ppp is restarted (lock/unlock).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

mscPppLnkRestartTimer		1.3.6.1.4.1.562.36.2.1.102.2.10.1.6
This is the time, in milliseconds, that Ppp will wait for a response to a configure request or a terminate request before retrying.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	1000..10000

mscPppLnkContinuityMonitor		1.3.6.1.4.1.562.36.2.1.102.2.10.1.7
This attribute turns on/off (enabled/disabled) the Link Continuity Monitor. If set to enabled, periodic keep alive echo packet will be sent over the Ppp link. If set to disabled, no keep alive packets will be sent. A change to this attribute will not take effect until Ppp is restarted (lock/ unlock).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

mscPppLnkNegativeAckTries		1.3.6.1.4.1.562.36.2.1.102.2.10.1.8
This attribute specifies the maximum negative acknowledgments sent to the remote Ppp entity during negotiation before defaulting it's configuration parameters.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..4294967295

mscPppLnkQualityThreshold		1.3.6.1.4.1.562.36.2.1.102.2.10.1.9
This attribute specifies the minimum allowed line quality before the line is considered too poor to continue operation. The value for this attribute is a percentage measure of the line quality given in integers (10 to 99). The higher the value, the more stringent the line requirements.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	10..99

mscPppLnkQualityWindow		1.3.6.1.4.1.562.36.2.1.102.2.10.1.10
This attribute specifies the number of seconds used for sampling line quality. If line quality drops below the level set with the qualityThreshold attribute during this window, this instance of Ppp will be marked down until line quality recovers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	10..400

mscPppLnkTerminateRequestTries		1.3.6.1.4.1.562.36.2.1.102.2.10.1.11
This attribute specifies the maximum terminate requests to be sent, when closing the connection, and not answered before this instance of Ppp enters a closing state.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..4294967295

mscPppLnkConfigureRequestTries		1.3.6.1.4.1.562.36.2.1.102.2.10.1.12
This attribute specifies the number of configuration requests that will be sent out and not answered before this instance of Ppp enters a listening state. If both sides enter the listening state then the link will not come up. To eliminate this possibility, this attribute should be set to 1000000000. This will ensure that this end of the Ppp link will continue to try until the link is good.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..4294967295

mscPppLnkOperTable		1.3.6.1.4.1.562.36.2.1.102.2.11
This group contains the Ppp Link Operational attributes.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppLnkOperEntry

mscPppLnkOperEntry		1.3.6.1.4.1.562.36.2.1.102.2.11.1
An entry in the mscPppLnkOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppLnkOperEntry

mscPppLnkOperState		1.3.6.1.4.1.562.36.2.1.102.2.11.1.1
This is the operational state of the Link Control Protocol. For more information as to the definition of each state see RFC1331 section 5.3.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9)

mscPppLnkLineCondition		1.3.6.1.4.1.562.36.2.1.102.2.11.1.2
This attribute describes the condition of the physical line that Ppp is running over. ok: The condition of the line is good. looped: The line is looped back on itself, probably at the remote end. noClock: There is a hardware problem with the line. The cable may not be plugged in correctly. badLineCondition: The quality of the line is below the qualityThreshold.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(0), looped(1), noClock(3), badLineCondition(4)

mscPppLnkBadAddresses		1.3.6.1.4.1.562.36.2.1.102.2.11.1.4
This attribute counts the number of packets received with an incorrect Address Field. If this count is going up quickly, it could indicate that there is a line quality problem or that the remote end is transmitting a protocol other than Ppp. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLnkBadControls		1.3.6.1.4.1.562.36.2.1.102.2.11.1.5
This attribute counts the number of packets received on this link with an incorrect Control Field. If this count is going up quickly, it could indicate that there is a line quality problem or that the remote end is transmitting a protocol other than Ppp. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLnkPacketTooLongs		1.3.6.1.4.1.562.36.2.1.102.2.11.1.6
This attribute counts the number of packets received that have been discarded because their length exceeded the Maximum Receive Unit (Mru). This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLnkBadFcss		1.3.6.1.4.1.562.36.2.1.102.2.11.1.7
This attribute counts the number of packets received that have been discarded due to having an incorrect Frame Check Sequence (Fcs). This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLnkLocalMru		1.3.6.1.4.1.562.36.2.1.102.2.11.1.8
This is the current value of the Maximum Receive Unit (Mru) for the local Ppp Entity. This value is the Mru that the remote entity is using when sending packets to the local Ppp entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	1..2147483648

mscPppLnkRemoteMru		1.3.6.1.4.1.562.36.2.1.102.2.11.1.9
This is the current value of the Maximum Receive Unit (Mru) for the remote Ppp entity. This value is the Mru that the local entity is using when sending packets to the remote Ppp entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	1..2147483648

mscPppLnkTransmitFcsSize		1.3.6.1.4.1.562.36.2.1.102.2.11.1.16
This is the size of the Frame Check Sequence (Fcs) in bits that the local node will generate when sending packets to the remote node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..128

mscPppLnkReceiveFcsSize		1.3.6.1.4.1.562.36.2.1.102.2.11.1.17
This is the size of the Frame Check Sequence (Fcs) in bits that the remote node will generate when sending packets to the local node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..128

mscPppLqm		1.3.6.1.4.1.562.36.2.1.102.3
OBJECT IDENTIFIER

mscPppLqmRowStatusTable		1.3.6.1.4.1.562.36.2.1.102.3.1
This entry controls the addition and deletion of mscPppLqm components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppLqmRowStatusEntry

mscPppLqmRowStatusEntry		1.3.6.1.4.1.562.36.2.1.102.3.1.1
A single entry in the table represents a single mscPppLqm component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppLqmRowStatusEntry

mscPppLqmRowStatus		1.3.6.1.4.1.562.36.2.1.102.3.1.1.1
This variable is used as the basis for SNMP naming of mscPppLqm components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

mscPppLqmComponentName		1.3.6.1.4.1.562.36.2.1.102.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscPppLqmStorageType		1.3.6.1.4.1.562.36.2.1.102.3.1.1.4
This variable represents the storage type value for the mscPppLqm tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscPppLqmIndex		1.3.6.1.4.1.562.36.2.1.102.3.1.1.10
This variable represents the index for the mscPppLqm tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscPppLqmProvTable		1.3.6.1.4.1.562.36.2.1.102.3.10
This group contains the provisioned attributes for the Ppp Link Quality Monitor component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppLqmProvEntry

mscPppLqmProvEntry		1.3.6.1.4.1.562.36.2.1.102.3.10.1
An entry in the mscPppLqmProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppLqmProvEntry

mscPppLqmConfigPeriod		1.3.6.1.4.1.562.36.2.1.102.3.10.1.1
This is the Lqm reporting period that the local Ppp entity will attempt to negotiate with the remote entity, in units of hundredths of a second. A value of '0' will allow the remote Ppp entity to determine the reporting period. A value greater than 180,000 (1/2 hour) will allow the period to be determined dynamically as a function of the transmit data rate. A value from 1-9 will be rounded up to 10 during negotiation. A change to this attribute will not take effect until Ppp is restarted (lock/unlock).
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..2147483647

mscPppLqmConfigStatus		1.3.6.1.4.1.562.36.2.1.102.3.10.1.2
If this attribute is enabled, the local node will attempt to perform Lqm negotiation with the remote node. If it is disabled then this negotiation is not performed. A change to this attribute will not take effect until Ppp is restarted (lock/unlock).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

mscPppLqmOperTable		1.3.6.1.4.1.562.36.2.1.102.3.11
This group contains the operational attributes for the Ppp Link Quality Monitor component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppLqmOperEntry

mscPppLqmOperEntry		1.3.6.1.4.1.562.36.2.1.102.3.11.1
An entry in the mscPppLqmOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppLqmOperEntry

mscPppLqmQuality		1.3.6.1.4.1.562.36.2.1.102.3.11.1.1
This is the current quality of the link as declared by the local Ppp entity's Link-Quality Management modules. A value of good indicates that LinkQualityMonitor configStatus is enabled and Link quality is above Link qualityThreshold. A value of bad indicates that LinkQualityMonitor configStatus is enabled and Link quality is not above Link qualityThreshold. A value of notDetermined indicates that LinkQualityMonitor configStatus is enabled and the quality of the link has not been calculated yet or LinkQualityMonitor configStatus is disabled.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	good(1), bad(2), notDetermined(3)

mscPppLqmInGoodOctets		1.3.6.1.4.1.562.36.2.1.102.3.11.1.2
This attribute counts the number of good octets received. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLqmLocalPeriod		1.3.6.1.4.1.562.36.2.1.102.3.11.1.3
This is the Lqm reporting period, in hundredths of a second that is in effect for the local Ppp entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4294967295

mscPppLqmRemotePeriod		1.3.6.1.4.1.562.36.2.1.102.3.11.1.4
This is the Lqm reporting period, in hundredths of a second, that is in effect for the remote Ppp entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4294967295

mscPppLqmOutLqrs		1.3.6.1.4.1.562.36.2.1.102.3.11.1.5
This attribute counts the number of link quality reports sent out. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLqmInLqrs		1.3.6.1.4.1.562.36.2.1.102.3.11.1.6
This attribute counts the number of link quality reports received. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppNcp		1.3.6.1.4.1.562.36.2.1.102.4
OBJECT IDENTIFIER

mscPppNcpRowStatusTable		1.3.6.1.4.1.562.36.2.1.102.4.1
This entry controls the addition and deletion of mscPppNcp components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppNcpRowStatusEntry

mscPppNcpRowStatusEntry		1.3.6.1.4.1.562.36.2.1.102.4.1.1
A single entry in the table represents a single mscPppNcp component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppNcpRowStatusEntry

mscPppNcpRowStatus		1.3.6.1.4.1.562.36.2.1.102.4.1.1.1
This variable is used as the basis for SNMP naming of mscPppNcp components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

mscPppNcpComponentName		1.3.6.1.4.1.562.36.2.1.102.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscPppNcpStorageType		1.3.6.1.4.1.562.36.2.1.102.4.1.1.4
This variable represents the storage type value for the mscPppNcp tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscPppNcpIndex		1.3.6.1.4.1.562.36.2.1.102.4.1.1.10
This variable represents the index for the mscPppNcp tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscPppNcpBprovTable		1.3.6.1.4.1.562.36.2.1.102.4.11
This group contains the provisioned attributes for the Bridge Network Control Protocol.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppNcpBprovEntry

mscPppNcpBprovEntry		1.3.6.1.4.1.562.36.2.1.102.4.11.1
An entry in the mscPppNcpBprovTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppNcpBprovEntry

mscPppNcpBConfigTinygram		1.3.6.1.4.1.562.36.2.1.102.4.11.1.1
If this attribute is set to disabled then the local Bridge Network Control Protocol (Bncp) entity will not initiate the tinygram compression option negotiation. If it is enabled then the local Bncp entity will initiate negotiation of this option. A change to this attribute will not take effect until Ppp is restarted (lock/unlock).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

mscPppNcpBConfigLanId		1.3.6.1.4.1.562.36.2.1.102.4.11.1.4
If this attribute is set to disabled then the local Bncp entity will not initiate the lan identification option negotiation. If it is enabled then the local Bncp entity will initiate negotiation of the option. A change to this attribute will not take effect until Ppp is restarted (lock/unlock).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

mscPppNcpIpOperTable		1.3.6.1.4.1.562.36.2.1.102.4.12
This group contains the Ip Network Control Protocol operational attributes.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppNcpIpOperEntry

mscPppNcpIpOperEntry		1.3.6.1.4.1.562.36.2.1.102.4.12.1
An entry in the mscPppNcpIpOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppNcpIpOperEntry

mscPppNcpIpOperState		1.3.6.1.4.1.562.36.2.1.102.4.12.1.1
This is the operational state of the Ip network protocol. For more information as to the definition of each state see RFC1331 section 5.3.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9)

mscPppNcpBoperTable		1.3.6.1.4.1.562.36.2.1.102.4.14
This group contains the Bridge Network Control Protocol operational attributes.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppNcpBoperEntry

mscPppNcpBoperEntry		1.3.6.1.4.1.562.36.2.1.102.4.14.1
An entry in the mscPppNcpBoperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppNcpBoperEntry

mscPppNcpBOperState		1.3.6.1.4.1.562.36.2.1.102.4.14.1.1
This is the operational status of the bridge network protocol. For more information as to the definition of each state see RFC1331 section 5.3.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9)

mscPppNcpBLocalToRemoteTinygramComp		1.3.6.1.4.1.562.36.2.1.102.4.14.1.3
This attribute indicates whether the local node will perform tinygram compression when sending packets to the remote entity. If it is disabled then the local entity will not perform tinygram compression. If it is enabled then the local entity will perform tinygram compression.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

mscPppNcpBRemoteToLocalTinygramComp		1.3.6.1.4.1.562.36.2.1.102.4.14.1.4
If this attribute is disabled then the remote entity is not expected to perform tinygram compression. If it is enabled then the remote entity is expected to perform tinygram compression.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

mscPppNcpBLocalToRemoteLanId		1.3.6.1.4.1.562.36.2.1.102.4.14.1.5
This attribute indicates whether the local node will include the lan identification field in transmitted packets or not. If it is disabled then the local node will not transmit this field, enabled means that the field will be transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

mscPppNcpBRemoteToLocalLanId		1.3.6.1.4.1.562.36.2.1.102.4.14.1.6
This attribute indicates whether the remote node has indicated that it will include the lan identification field in transmitted packets or not. If it is disabled then the field will not be transmitted, if enabled then the field will be transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

mscPppNcpOperTable		1.3.6.1.4.1.562.36.2.1.102.4.16
This group contains the operational attributes for any Network Control Protocols other than Ip and Bridge.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppNcpOperEntry

mscPppNcpOperEntry		1.3.6.1.4.1.562.36.2.1.102.4.16.1
An entry in the mscPppNcpOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppNcpOperEntry

mscPppNcpAppletalkOperState		1.3.6.1.4.1.562.36.2.1.102.4.16.1.1
This is the operational state of the AppleTalk network protocol. For more information as to the definition of each state see RFC1331 section 5.3.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9)

mscPppNcpIpxOperState		1.3.6.1.4.1.562.36.2.1.102.4.16.1.2
This is the operational state of the Ipx network protocol. For more information as to the definition of each state see RFC1331 section 5.3.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9)

mscPppNcpXnsOperState		1.3.6.1.4.1.562.36.2.1.102.4.16.1.3
This is the operational state of the Xns network protocol. For more information as to the definition of each state see RFC1331 section 5.3.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9)

mscPppNcpDecnetOperState		1.3.6.1.4.1.562.36.2.1.102.4.16.1.4
This is the operational state of the DecNet network protocol. For more information as to the definition of each state see RFC1331 section 5.3.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9)

mscPppNcpBmcEntry		1.3.6.1.4.1.562.36.2.1.102.4.2
OBJECT IDENTIFIER

mscPppNcpBmcEntryRowStatusTable		1.3.6.1.4.1.562.36.2.1.102.4.2.1
This entry controls the addition and deletion of mscPppNcpBmcEntry components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppNcpBmcEntryRowStatusEntry

mscPppNcpBmcEntryRowStatusEntry		1.3.6.1.4.1.562.36.2.1.102.4.2.1.1
A single entry in the table represents a single mscPppNcpBmcEntry component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppNcpBmcEntryRowStatusEntry

mscPppNcpBmcEntryRowStatus		1.3.6.1.4.1.562.36.2.1.102.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscPppNcpBmcEntry components. These components can be added.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

mscPppNcpBmcEntryComponentName		1.3.6.1.4.1.562.36.2.1.102.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscPppNcpBmcEntryStorageType		1.3.6.1.4.1.562.36.2.1.102.4.2.1.1.4
This variable represents the storage type value for the mscPppNcpBmcEntry tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscPppNcpBmcEntryMacTypeIndex		1.3.6.1.4.1.562.36.2.1.102.4.2.1.1.10
This variable represents the index for the mscPppNcpBmcEntry tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	ethernet(1), tokenBus(2), tokenRing(3), fddi(4)

mscPppNcpBmcEntryProvTable		1.3.6.1.4.1.562.36.2.1.102.4.2.10
This group contains the attributes for one entry in the BridgeMediaConfigEntry table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppNcpBmcEntryProvEntry

mscPppNcpBmcEntryProvEntry		1.3.6.1.4.1.562.36.2.1.102.4.2.10.1
An entry in the mscPppNcpBmcEntryProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppNcpBmcEntryProvEntry

mscPppNcpBmcEntryLocalStatus		1.3.6.1.4.1.562.36.2.1.102.4.2.10.1.1
This attribute indicates whether the local Ppp bridging entity should accept packets of the protocol type identified by the instance value of this component. Setting this attribute to accept allows packets of this protocol type to be accepted. A change to this attribute will not take effect until Ppp is restarted (lock/unlock).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	accept(1)

mscPppNcpBmEntry		1.3.6.1.4.1.562.36.2.1.102.4.3
OBJECT IDENTIFIER

mscPppNcpBmEntryRowStatusTable		1.3.6.1.4.1.562.36.2.1.102.4.3.1
* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of mscPppNcpBmEntry components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppNcpBmEntryRowStatusEntry

mscPppNcpBmEntryRowStatusEntry		1.3.6.1.4.1.562.36.2.1.102.4.3.1.1
A single entry in the table represents a single mscPppNcpBmEntry component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppNcpBmEntryRowStatusEntry

mscPppNcpBmEntryRowStatus		1.3.6.1.4.1.562.36.2.1.102.4.3.1.1.1
This variable is used as the basis for SNMP naming of mscPppNcpBmEntry components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

mscPppNcpBmEntryComponentName		1.3.6.1.4.1.562.36.2.1.102.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscPppNcpBmEntryStorageType		1.3.6.1.4.1.562.36.2.1.102.4.3.1.1.4
This variable represents the storage type value for the mscPppNcpBmEntry tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscPppNcpBmEntryMacTypeIndex		1.3.6.1.4.1.562.36.2.1.102.4.3.1.1.10
This variable represents the index for the mscPppNcpBmEntry tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	ethernet(1), tokenBus(2), tokenRing(3), fddi(4)

mscPppNcpBmEntryOperTable		1.3.6.1.4.1.562.36.2.1.102.4.3.10
* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group contains the attributes for one entry in the BridgeMediaEntry table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppNcpBmEntryOperEntry

mscPppNcpBmEntryOperEntry		1.3.6.1.4.1.562.36.2.1.102.4.3.10.1
An entry in the mscPppNcpBmEntryOperTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppNcpBmEntryOperEntry

mscPppNcpBmEntryLocalStatus		1.3.6.1.4.1.562.36.2.1.102.4.3.10.1.2
This attribute indicates whether the local Ppp bridging entity will accept packets of the protocol type identified by the instance value of this component. A value of accept indicates that packets of this protocol type will be accepted. A value of dontAccept indicates that packets of this type will not be accepted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	accept(1), dontAccept(2)

mscPppNcpBmEntryRemoteStatus		1.3.6.1.4.1.562.36.2.1.102.4.3.10.1.3
This attribute indicates whether the remote Ppp bridging entity will accept packets of the protocol type identified by the instance value of this component. A value of accept indicates that packets of this protocol type will be accepted. A value of dontAccept indicates that packets of this type will not be accepted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	accept(1), dontAccept(2)

mscPppFramer		1.3.6.1.4.1.562.36.2.1.102.5
OBJECT IDENTIFIER

mscPppFramerRowStatusTable		1.3.6.1.4.1.562.36.2.1.102.5.1
This entry controls the addition and deletion of mscPppFramer components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppFramerRowStatusEntry

mscPppFramerRowStatusEntry		1.3.6.1.4.1.562.36.2.1.102.5.1.1
A single entry in the table represents a single mscPppFramer component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppFramerRowStatusEntry

mscPppFramerRowStatus		1.3.6.1.4.1.562.36.2.1.102.5.1.1.1
This variable is used as the basis for SNMP naming of mscPppFramer components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

mscPppFramerComponentName		1.3.6.1.4.1.562.36.2.1.102.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscPppFramerStorageType		1.3.6.1.4.1.562.36.2.1.102.5.1.1.4
This variable represents the storage type value for the mscPppFramer tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscPppFramerIndex		1.3.6.1.4.1.562.36.2.1.102.5.1.1.10
This variable represents the index for the mscPppFramer tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscPppFramerProvTable		1.3.6.1.4.1.562.36.2.1.102.5.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppFramerProvEntry

mscPppFramerProvEntry		1.3.6.1.4.1.562.36.2.1.102.5.10.1
An entry in the mscPppFramerProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppFramerProvEntry

mscPppFramerInterfaceName		1.3.6.1.4.1.562.36.2.1.102.5.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the logical processor on which Framer's parent component (as well as Framer itself) will run.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Link

mscPppFramerStateTable		1.3.6.1.4.1.562.36.2.1.102.5.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppFramerStateEntry

mscPppFramerStateEntry		1.3.6.1.4.1.562.36.2.1.102.5.12.1
An entry in the mscPppFramerStateTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppFramerStateEntry

mscPppFramerAdminState		1.3.6.1.4.1.562.36.2.1.102.5.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	locked(0), unlocked(1), shuttingDown(2)

mscPppFramerOperationalState		1.3.6.1.4.1.562.36.2.1.102.5.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

mscPppFramerUsageState		1.3.6.1.4.1.562.36.2.1.102.5.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(0), active(1), busy(2)

mscPppFramerStatsTable		1.3.6.1.4.1.562.36.2.1.102.5.13
This group contains the operational statistics data for a Framer component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppFramerStatsEntry

mscPppFramerStatsEntry		1.3.6.1.4.1.562.36.2.1.102.5.13.1
An entry in the mscPppFramerStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppFramerStatsEntry

mscPppFramerFrmToIf		1.3.6.1.4.1.562.36.2.1.102.5.13.1.1
This attribute counts the number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppFramerFrmFromIf		1.3.6.1.4.1.562.36.2.1.102.5.13.1.2
This attribute counts the number of frames received from the link interface by Framer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppFramerAborts		1.3.6.1.4.1.562.36.2.1.102.5.13.1.3
This attribute counts the total number of aborts received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppFramerCrcErrors		1.3.6.1.4.1.562.36.2.1.102.5.13.1.4
This attribute counts the total number of frames with CRC errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppFramerLrcErrors		1.3.6.1.4.1.562.36.2.1.102.5.13.1.5
This attribute counts the total number of frames with LRC errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppFramerNonOctetErrors		1.3.6.1.4.1.562.36.2.1.102.5.13.1.6
This attribute counts the total number of frames that were non octet aligned.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppFramerOverruns		1.3.6.1.4.1.562.36.2.1.102.5.13.1.7
This attribute counts the total number of frames received from the link for which overruns occurred.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppFramerUnderruns		1.3.6.1.4.1.562.36.2.1.102.5.13.1.8
This attribute counts the total number of frames transmitted to the link for which underruns occurred.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppFramerLargeFrmErrors		1.3.6.1.4.1.562.36.2.1.102.5.13.1.9
This attribute counts the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contained more than the 255 block hardware limit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppFramerUtilTable		1.3.6.1.4.1.562.36.2.1.102.5.14
This group contains the link utilizaiton operational data for a Framer component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppFramerUtilEntry

mscPppFramerUtilEntry		1.3.6.1.4.1.562.36.2.1.102.5.14.1
An entry in the mscPppFramerUtilTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppFramerUtilEntry

mscPppFramerNormPrioLinkUtilToIf		1.3.6.1.4.1.562.36.2.1.102.5.14.1.1
This attribute is the utilization of the normal priority data sent to the link as a percentage of the available bandwidth on the link. The utilization is the average for the last minute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32	0..100

mscPppFramerNormPrioLinkUtilFromIf		1.3.6.1.4.1.562.36.2.1.102.5.14.1.3
This attribute is the utilization of the normal priority data received from the link as a percentage of the available bandwidth on the link. The utilization is the average for the last minute.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32	0..100

mscPppLeq		1.3.6.1.4.1.562.36.2.1.102.6
OBJECT IDENTIFIER

mscPppLeqRowStatusTable		1.3.6.1.4.1.562.36.2.1.102.6.1
This entry controls the addition and deletion of mscPppLeq components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppLeqRowStatusEntry

mscPppLeqRowStatusEntry		1.3.6.1.4.1.562.36.2.1.102.6.1.1
A single entry in the table represents a single mscPppLeq component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppLeqRowStatusEntry

mscPppLeqRowStatus		1.3.6.1.4.1.562.36.2.1.102.6.1.1.1
This variable is used as the basis for SNMP naming of mscPppLeq components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

mscPppLeqComponentName		1.3.6.1.4.1.562.36.2.1.102.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mscPppLeqStorageType		1.3.6.1.4.1.562.36.2.1.102.6.1.1.4
This variable represents the storage type value for the mscPppLeq tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

mscPppLeqIndex		1.3.6.1.4.1.562.36.2.1.102.6.1.1.10
This variable represents the index for the mscPppLeq tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

mscPppLeqProvTable		1.3.6.1.4.1.562.36.2.1.102.6.10
This group contains the provisioned attributes for the LinkEmissionQueue component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppLeqProvEntry

mscPppLeqProvEntry		1.3.6.1.4.1.562.36.2.1.102.6.10.1
An entry in the mscPppLeqProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppLeqProvEntry

mscPppLeqMaxPackets		1.3.6.1.4.1.562.36.2.1.102.6.10.1.1
This attribute specifies the maximum number of packets allowed in the Leq before being discarded. If this attribute is set to zero then the maximum number of packets is calculated from the transmit data rate. This calculated value is placed in queuePktThreshold.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0..2048

mscPppLeqMaxMsecData		1.3.6.1.4.1.562.36.2.1.102.6.10.1.2
This attribute specifies the maximum number of 'Milliseconds worth of data' allowed in the Leq before packets are discarded. The queueByteThreshold will be calculated from this attribute, based on the transmit data rate.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	100..60000

mscPppLeqMaxPercentMulticast		1.3.6.1.4.1.562.36.2.1.102.6.10.1.3
This attribute specifies the maximum percentage of multicast packets allowed in the Leq, based on queuePktThreshold, before being discarded. The calculated value will be placed in queueMulticastThreshold.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	1..100

mscPppLeqTimeToLive		1.3.6.1.4.1.562.36.2.1.102.6.10.1.4
This attribute specifies the 'Milliseconds Time To Live' of packets in the Leq. If the timeToLive of a packet expires, it will be discarded.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	100..60000

mscPppLeqStatsTable		1.3.6.1.4.1.562.36.2.1.102.6.11
This group contains Link Emission Queue general statistics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppLeqStatsEntry

mscPppLeqStatsEntry		1.3.6.1.4.1.562.36.2.1.102.6.11.1
An entry in the mscPppLeqStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppLeqStatsEntry

mscPppLeqTimedOutPkt		1.3.6.1.4.1.562.36.2.1.102.6.11.1.1
This attribute counts the number of packets that have been discarded due to exceeding the timeToLive. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLeqHardwareForcedPkt		1.3.6.1.4.1.562.36.2.1.102.6.11.1.2
This attribute counts the number of hardware forced packets on this instance of Ppp. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLeqForcedPktDiscards		1.3.6.1.4.1.562.36.2.1.102.6.11.1.4
This attribute counts the total number of hardware forced packets that had to be discarded due to link failure. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLeqQueuePurgeDiscards		1.3.6.1.4.1.562.36.2.1.102.6.11.1.5
This attribute counts the total number of packets discarded by a queue purge (i.e. a discarding of all packets on the queue). This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLeqTStatsTable		1.3.6.1.4.1.562.36.2.1.102.6.12
This group contains Link Emission Queue total statistics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppLeqTStatsEntry

mscPppLeqTStatsEntry		1.3.6.1.4.1.562.36.2.1.102.6.12.1
An entry in the mscPppLeqTStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppLeqTStatsEntry

mscPppLeqTotalPktHandled		1.3.6.1.4.1.562.36.2.1.102.6.12.1.1
This attribute counts the total number of packets handled by the Leq. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLeqTotalPktForwarded		1.3.6.1.4.1.562.36.2.1.102.6.12.1.2
This attribute counts the total number of packets forwarded by the Leq. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLeqTotalPktQueued		1.3.6.1.4.1.562.36.2.1.102.6.12.1.3
This attribute counts the total number of packets that required queuing by the Leq due to transmit congestion. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLeqTotalMulticastPkt		1.3.6.1.4.1.562.36.2.1.102.6.12.1.4
This attribute counts the total number of multicast packets handled by this instance of Ppp. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLeqTotalPktDiscards		1.3.6.1.4.1.562.36.2.1.102.6.12.1.8
This attribute counts the total number of packets that were discarded for this instance of Ppp. This is the sum of timedOutPkt, forcedPktDiscards, queuePurgeDiscards, pktThresholdExceeded, byteThresholdExceeded, mulThresholdExceeded, and memThresholdExceeded. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLeqCStatsTable		1.3.6.1.4.1.562.36.2.1.102.6.13
This group contains Link Emission Queue current statistics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppLeqCStatsEntry

mscPppLeqCStatsEntry		1.3.6.1.4.1.562.36.2.1.102.6.13.1
An entry in the mscPppLeqCStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppLeqCStatsEntry

mscPppLeqCurrentPktQueued		1.3.6.1.4.1.562.36.2.1.102.6.13.1.1
This attribute counts the current number of packets queued.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32	0..4294967295

mscPppLeqCurrentBytesQueued		1.3.6.1.4.1.562.36.2.1.102.6.13.1.2
This attribute counts the current number of bytes queued.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32	0..4294967295

mscPppLeqCurrentMulticastQueued		1.3.6.1.4.1.562.36.2.1.102.6.13.1.3
This attribute counts the current number of multicast packets in the queue.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32	0..4294967295

mscPppLeqThrStatsTable		1.3.6.1.4.1.562.36.2.1.102.6.14
This group contains Link Emission Queue threshold statistics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MscPppLeqThrStatsEntry

mscPppLeqThrStatsEntry		1.3.6.1.4.1.562.36.2.1.102.6.14.1
An entry in the mscPppLeqThrStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MscPppLeqThrStatsEntry

mscPppLeqQueuePktThreshold		1.3.6.1.4.1.562.36.2.1.102.6.14.1.1
This attribute is the maximum number of packets that can be contained in the queue before being discarded. If maxPackets was set to 0 then this attribute will contain the value that has been calculated based on the transmit data rate. If maxPackets was set to one or more than this attribute will contain that number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

mscPppLeqPktThresholdExceeded		1.3.6.1.4.1.562.36.2.1.102.6.14.1.2
This attribute counts the number of packets discarded due to the queuePktThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLeqQueueByteThreshold		1.3.6.1.4.1.562.36.2.1.102.6.14.1.3
This attribute is the maximum number of bytes allowed in the queue based on maxMsecData and the transmit data rate.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

mscPppLeqByteThresholdExceeded		1.3.6.1.4.1.562.36.2.1.102.6.14.1.4
This attribute counts the number of packets discarded due to the queueByteThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLeqQueueMulticastThreshold		1.3.6.1.4.1.562.36.2.1.102.6.14.1.5
This attribute is the number of multicast packets allowed in the queue based on maxPercentMulticast and maxPackets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

mscPppLeqMulThresholdExceeded		1.3.6.1.4.1.562.36.2.1.102.6.14.1.6
This attribute counts the number of packets discarded due to the queueMulticastThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

mscPppLeqMemThresholdExceeded		1.3.6.1.4.1.562.36.2.1.102.6.14.1.7
This attribute counts the number of packets discarded due to exceeding the memory usage threshold for Leq. The memory usage threshold is determined by the Leq software, guaranteeing that the Leq does not consume all of the memory. This counter will wrap around to 0 when it exceeds its maximum count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

pppGroup		1.3.6.1.4.1.562.36.2.2.33.1
OBJECT IDENTIFIER

pppGroupCA		1.3.6.1.4.1.562.36.2.2.33.1.1
OBJECT IDENTIFIER

pppGroupCA02		1.3.6.1.4.1.562.36.2.2.33.1.1.3
OBJECT IDENTIFIER

pppGroupCA02A		1.3.6.1.4.1.562.36.2.2.33.1.1.3.2
OBJECT IDENTIFIER

pppCapabilities		1.3.6.1.4.1.562.36.2.2.33.3
OBJECT IDENTIFIER

pppCapabilitiesCA		1.3.6.1.4.1.562.36.2.2.33.3.1
OBJECT IDENTIFIER

pppCapabilitiesCA02		1.3.6.1.4.1.562.36.2.2.33.3.1.3
OBJECT IDENTIFIER

pppCapabilitiesCA02A		1.3.6.1.4.1.562.36.2.2.33.3.1.3.2
OBJECT IDENTIFIER

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor