Nortel-MsCarrier-MscPassport-VnetEuroIsdnMIB

File: Nortel-MsCarrier-MscPassport-VnetEuroIsdnMIB.mib (44037 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs Counter32
DisplayString StorageType RowStatus
Gauge32 Unsigned32 NonReplicated
Link mscSigChan mscSigChanIndex

Defined Types

MscSigChanEIsdnRowStatusEntry  
SEQUENCE    
  mscSigChanEIsdnRowStatus RowStatus
  mscSigChanEIsdnComponentName DisplayString
  mscSigChanEIsdnStorageType StorageType
  mscSigChanEIsdnIndex NonReplicated

MscSigChanEIsdnL2Entry  
SEQUENCE    
  mscSigChanEIsdnT23 Unsigned32
  mscSigChanEIsdnT200 Unsigned32
  mscSigChanEIsdnN200 Unsigned32
  mscSigChanEIsdnT203 Unsigned32
  mscSigChanEIsdnCircuitSwitchedK Unsigned32

MscSigChanEIsdnL3Entry  
SEQUENCE    
  mscSigChanEIsdnT310 Unsigned32

MscSigChanEIsdnProvEntry  
SEQUENCE    
  mscSigChanEIsdnSide INTEGER
  mscSigChanEIsdnMaxNonCallConcurrent Unsigned32
  mscSigChanEIsdnOverlapSending INTEGER
  mscSigChanEIsdnOverlapReceiving INTEGER

MscSigChanEIsdnStateEntry  
SEQUENCE    
  mscSigChanEIsdnAdminState INTEGER
  mscSigChanEIsdnOperationalState INTEGER
  mscSigChanEIsdnUsageState INTEGER

MscSigChanEIsdnStatsEntry  
SEQUENCE    
  mscSigChanEIsdnTotalCallsToIf Counter32
  mscSigChanEIsdnTotalCallsFromIf Counter32
  mscSigChanEIsdnNonCallAssocSessionsToIf Counter32
  mscSigChanEIsdnNonCallAssocSessionsFromIf Counter32

MscSigChanEIsdnOperEntry  
SEQUENCE    
  mscSigChanEIsdnActiveChannels Gauge32
  mscSigChanEIsdnActiveVoiceChannels Gauge32
  mscSigChanEIsdnActiveDataChannels Gauge32
  mscSigChanEIsdnPeakActiveChannels Gauge32
  mscSigChanEIsdnPeakActiveVoiceChannels Gauge32
  mscSigChanEIsdnPeakActiveDataChannels Gauge32
  mscSigChanEIsdnDChanStatus INTEGER

MscSigChanEIsdnToolsEntry  
SEQUENCE    
  mscSigChanEIsdnTracing OCTET STRING

MscSigChanEIsdnOptEntry  
SEQUENCE    
  mscSigChanEIsdnVariant INTEGER
  mscSigChanEIsdnConnectServiceTimer Unsigned32
  mscSigChanEIsdnResponseServiceTimer Unsigned32
  mscSigChanEIsdnLifetimeServiceTimer Unsigned32

MscSigChanEIsdnFramerRowStatusEntry  
SEQUENCE    
  mscSigChanEIsdnFramerRowStatus RowStatus
  mscSigChanEIsdnFramerComponentName DisplayString
  mscSigChanEIsdnFramerStorageType StorageType
  mscSigChanEIsdnFramerIndex NonReplicated

MscSigChanEIsdnFramerProvEntry  
SEQUENCE    
  mscSigChanEIsdnFramerInterfaceName Link

MscSigChanEIsdnFramerStateEntry  
SEQUENCE    
  mscSigChanEIsdnFramerAdminState INTEGER
  mscSigChanEIsdnFramerOperationalState INTEGER
  mscSigChanEIsdnFramerUsageState INTEGER

MscSigChanEIsdnFramerStatsEntry  
SEQUENCE    
  mscSigChanEIsdnFramerFrmToIf Counter32
  mscSigChanEIsdnFramerFrmFromIf Counter32
  mscSigChanEIsdnFramerOctetFromIf Counter32
  mscSigChanEIsdnFramerAborts Counter32
  mscSigChanEIsdnFramerCrcErrors Counter32
  mscSigChanEIsdnFramerLrcErrors Counter32
  mscSigChanEIsdnFramerNonOctetErrors Counter32
  mscSigChanEIsdnFramerOverruns Counter32
  mscSigChanEIsdnFramerUnderruns Counter32
  mscSigChanEIsdnFramerLargeFrmErrors Counter32

Defined Values

vnetEuroIsdnMIB 1.3.6.1.4.1.562.36.2.2.138
OBJECT IDENTIFIER    

mscSigChanEIsdn 1.3.6.1.4.1.562.36.2.1.115.14
OBJECT IDENTIFIER    

mscSigChanEIsdnRowStatusTable 1.3.6.1.4.1.562.36.2.1.115.14.1
This entry controls the addition and deletion of mscSigChanEIsdn components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnRowStatusEntry

mscSigChanEIsdnRowStatusEntry 1.3.6.1.4.1.562.36.2.1.115.14.1.1
A single entry in the table represents a single mscSigChanEIsdn component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnRowStatusEntry  

mscSigChanEIsdnRowStatus 1.3.6.1.4.1.562.36.2.1.115.14.1.1.1
This variable is used as the basis for SNMP naming of mscSigChanEIsdn components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mscSigChanEIsdnComponentName 1.3.6.1.4.1.562.36.2.1.115.14.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscSigChanEIsdnStorageType 1.3.6.1.4.1.562.36.2.1.115.14.1.1.4
This variable represents the storage type value for the mscSigChanEIsdn tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscSigChanEIsdnIndex 1.3.6.1.4.1.562.36.2.1.115.14.1.1.10
This variable represents the index for the mscSigChanEIsdn tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscSigChanEIsdnL2Table 1.3.6.1.4.1.562.36.2.1.115.14.11
This group specifies the provisionable layer 2 attributes of the Euro ISDN (ETSI-T) protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnL2Entry

mscSigChanEIsdnL2Entry 1.3.6.1.4.1.562.36.2.1.115.14.11.1
An entry in the mscSigChanEIsdnL2Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnL2Entry  

mscSigChanEIsdnT23 1.3.6.1.4.1.562.36.2.1.115.14.11.1.1
This attribute specifies duration of the layer 2 enable request timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

mscSigChanEIsdnT200 1.3.6.1.4.1.562.36.2.1.115.14.11.1.2
This attribute specifies the maximum elapsed time between a layer 2 frame and its acknowledgment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..20  

mscSigChanEIsdnN200 1.3.6.1.4.1.562.36.2.1.115.14.11.1.3
This attribute specifies the maximum number of re-transmissions of a layer 2 frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..8  

mscSigChanEIsdnT203 1.3.6.1.4.1.562.36.2.1.115.14.11.1.4
This attribute specifies the maximum time during which layer 2 frames may be absent. Expiry triggers a check on whether the far end is alive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 2..40  

mscSigChanEIsdnCircuitSwitchedK 1.3.6.1.4.1.562.36.2.1.115.14.11.1.6
This attribute specifies the maximum number of sequentially numbered I frames (that is, window size (k)) that may be unacknowledged at any given time for a SAP supporting primary rate (64kbit/sec) signalling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..127  

mscSigChanEIsdnL3Table 1.3.6.1.4.1.562.36.2.1.115.14.12
This group represents the provisionable Layer 3 timer attributes of a the Euro ISDN (ETSI-T) protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnL3Entry

mscSigChanEIsdnL3Entry 1.3.6.1.4.1.562.36.2.1.115.14.12.1
An entry in the mscSigChanEIsdnL3Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnL3Entry  

mscSigChanEIsdnT310 1.3.6.1.4.1.562.36.2.1.115.14.12.1.4
This attribute specifies duration of the call proceeding state timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 10..120  

mscSigChanEIsdnProvTable 1.3.6.1.4.1.562.36.2.1.115.14.13
This group defines the general options of the D-channel signalling link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnProvEntry

mscSigChanEIsdnProvEntry 1.3.6.1.4.1.562.36.2.1.115.14.13.1
An entry in the mscSigChanEIsdnProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnProvEntry  

mscSigChanEIsdnSide 1.3.6.1.4.1.562.36.2.1.115.14.13.1.1
This attribute specifies whether the interface is the network or user side of the connection. The parameter applies to both the layer 2 and layer 3 of the interface. In addition, if this attribute is set to network, then the interface is master during channel negotiation. If this attribute is set to user, then the interface is slave during channel negotiation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(1), user(2)  

mscSigChanEIsdnMaxNonCallConcurrent 1.3.6.1.4.1.562.36.2.1.115.14.13.1.2
This attribute specifies the maximum number of simultaneous active non call-associated sessions that are allowed. Reduction of the value does not impact NCAS sessions already in progress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..30  

mscSigChanEIsdnOverlapSending 1.3.6.1.4.1.562.36.2.1.115.14.13.1.3
This attribute specifies whether overlap sending to the PBX is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscSigChanEIsdnOverlapReceiving 1.3.6.1.4.1.562.36.2.1.115.14.13.1.4
This attribute specifies whether overlap receiving from the PBX is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscSigChanEIsdnStateTable 1.3.6.1.4.1.562.36.2.1.115.14.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnStateEntry

mscSigChanEIsdnStateEntry 1.3.6.1.4.1.562.36.2.1.115.14.14.1
An entry in the mscSigChanEIsdnStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnStateEntry  

mscSigChanEIsdnAdminState 1.3.6.1.4.1.562.36.2.1.115.14.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscSigChanEIsdnOperationalState 1.3.6.1.4.1.562.36.2.1.115.14.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscSigChanEIsdnUsageState 1.3.6.1.4.1.562.36.2.1.115.14.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscSigChanEIsdnStatsTable 1.3.6.1.4.1.562.36.2.1.115.14.15
This group provides the statistical attributes for the SigChan/x EuroIsdn component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnStatsEntry

mscSigChanEIsdnStatsEntry 1.3.6.1.4.1.562.36.2.1.115.14.15.1
An entry in the mscSigChanEIsdnStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnStatsEntry  

mscSigChanEIsdnTotalCallsToIf 1.3.6.1.4.1.562.36.2.1.115.14.15.1.2
This attribute counts the total number of calls that have been made to the interface. The value wraps to zero when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnTotalCallsFromIf 1.3.6.1.4.1.562.36.2.1.115.14.15.1.3
This attribute counts the total number of calls that have been made from the interface. The value wraps to zero when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnNonCallAssocSessionsToIf 1.3.6.1.4.1.562.36.2.1.115.14.15.1.4
This attribute counts the total number of non call-associated sessions that have been made to the interface. The value wraps to zero when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnNonCallAssocSessionsFromIf 1.3.6.1.4.1.562.36.2.1.115.14.15.1.5
This attribute counts the total number of non call-associated sessions that have been made from the interface. The value wraps to zero when it exceeds its maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnOperTable 1.3.6.1.4.1.562.36.2.1.115.14.16
This group provides the operational attributes for the SigChan/x EuroIsdn component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnOperEntry

mscSigChanEIsdnOperEntry 1.3.6.1.4.1.562.36.2.1.115.14.16.1
An entry in the mscSigChanEIsdnOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnOperEntry  

mscSigChanEIsdnActiveChannels 1.3.6.1.4.1.562.36.2.1.115.14.16.1.1
This attribute indicates the number of currently active channels. This includes channels used by both, data and voice calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..128  

mscSigChanEIsdnActiveVoiceChannels 1.3.6.1.4.1.562.36.2.1.115.14.16.1.2
This attribute indicates the number of channels that are currently used by voice calls. This includes modem calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..128  

mscSigChanEIsdnActiveDataChannels 1.3.6.1.4.1.562.36.2.1.115.14.16.1.3
This attribute indicates the number of channels that are currently used by data calls. This does not include modem data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..128  

mscSigChanEIsdnPeakActiveChannels 1.3.6.1.4.1.562.36.2.1.115.14.16.1.4
This attribute indicates the maximum value of the activeChannels attribute during the last polling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..128  

mscSigChanEIsdnPeakActiveVoiceChannels 1.3.6.1.4.1.562.36.2.1.115.14.16.1.5
This attribute indicates the maximum value of the activeVoiceChannels attribute during the last polling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..128  

mscSigChanEIsdnPeakActiveDataChannels 1.3.6.1.4.1.562.36.2.1.115.14.16.1.6
This attribute indicates the maximum value of the activeDataChannels attribute during the last polling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..128  

mscSigChanEIsdnDChanStatus 1.3.6.1.4.1.562.36.2.1.115.14.16.1.7
This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is enabled. If the signalling channel stays in the established state, then it is waiting for a restart from the PBX. enabling means that the resources for processing calls are being initialized. If the signalling channel stays in the enabling state then it is waiting for a restart acknowledgment from the PBX. inService means that the resources for processing calls are available. restarting means that the resources for call processing are being initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER outOfService(0), establishing(1), established(2), enabling(3), inService(4), restarting(5)  

mscSigChanEIsdnToolsTable 1.3.6.1.4.1.562.36.2.1.115.14.17
This contains a series of operational attributes which turn on and off several kinds of tracing.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnToolsEntry

mscSigChanEIsdnToolsEntry 1.3.6.1.4.1.562.36.2.1.115.14.17.1
An entry in the mscSigChanEIsdnToolsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnToolsEntry  

mscSigChanEIsdnTracing 1.3.6.1.4.1.562.36.2.1.115.14.17.1.1
This attribute defines which types of tracing are active on the signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueueSize attribute of the Lp/x Eng Ds/debug component must be greater than 0 and the operator's NMIS session must have the debug stream included in its data stream list (for example: set Nmis Telnet Session/1 dataStreams deb). Several types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and slows down call processing on a heavily loaded card. If there is message block exhaustion tracing is suspended for a period of time and then automatically re-enabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occurring. Protocol errors are also reported in summary form as alarms. q931Summary - summary of the Q.931 messages on the signalling link. q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Q.921 messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

mscSigChanEIsdnOptTable 1.3.6.1.4.1.562.36.2.1.115.14.18
This group specifies the provisionable attributes specific to the Euro ISDN (ETSI-T) protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnOptEntry

mscSigChanEIsdnOptEntry 1.3.6.1.4.1.562.36.2.1.115.14.18.1
An entry in the mscSigChanEIsdnOptTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnOptEntry  

mscSigChanEIsdnVariant 1.3.6.1.4.1.562.36.2.1.115.14.18.1.1
This attribute specifies the specific variant of the Euro ISDN (ETSI- T) protocol. Supported variants are: etsiGeneric - provides generic ETSI-T protocol. Only proxy of the NETWORK side of the protocol is implemented, austria - provides ETSI-T protocol variant as per the Austrian national specification. Only the USER side of the protocol is implemented, germany - provides ETSI-T protocol variant as per the German national specification. Only the USER side of the protocol is implemented.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER etsiGeneric(0), austria(1), germany(2)  

mscSigChanEIsdnConnectServiceTimer 1.3.6.1.4.1.562.36.2.1.115.14.18.1.2
This attribute specifies duration of the 'await connection' supervisory timer which applies to non call-associated sessions providing bearer-independent connection-oriented transport for supplementary services. The timer is started at the ingress Passport when a REGISTER message is received from the source PBX and stopped when a virtual circuit with the egress Passport is established. If the timer expires, the non call-associated session is cleared. The 'await connection' timer (attribute connectServiceTimer) together with 'await response' timer (attribute responseServiceTimer) provide equivalent of the T-ACTIVATE timer described in the relevant supplementary service specifications. A change of the timer value does not apply to timers already running.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

mscSigChanEIsdnResponseServiceTimer 1.3.6.1.4.1.562.36.2.1.115.14.18.1.3
This attribute specifies duration of the 'await response' supervisory timer which applies to non call-associated sessions providing bearer-independent connection-oriented transport for supplementary services. The timer is started at the ingress Passport when creation of a virtual circuit with the egress Passport is confirmed and stopped when the first message from the destination PBX is received. If the timer expires, the non call-associated session is cleared. The 'await connection' timer (attribute connectServiceTimer) together with 'await response' timer (attribute responseServiceTimer) provide equivalent of the T-ACTIVATE timer described in the relevant supplementary service specifications. A change of the timer value does not apply to timers already running.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

mscSigChanEIsdnLifetimeServiceTimer 1.3.6.1.4.1.562.36.2.1.115.14.18.1.4
This attribute specifies duration of the service lifetime supervisory timer which applies to non call-associated sessions providing bearer-independent connection-oriented transport for supplementary services. The timer limits the duration of a virtual call. It is started at the ingress Passport at the moment the first response message from the destination PBX has been received and stopped when the non call-associated session is released. If the timer expires, the non call-associated session is cleared. This timer is equivalent to the T-CCBS6 timer described in the relevant supplementary service specifications. A change of the timer value does not apply to timers already running.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..200  

mscSigChanEIsdnFramer 1.3.6.1.4.1.562.36.2.1.115.14.2
OBJECT IDENTIFIER    

mscSigChanEIsdnFramerRowStatusTable 1.3.6.1.4.1.562.36.2.1.115.14.2.1
This entry controls the addition and deletion of mscSigChanEIsdnFramer components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnFramerRowStatusEntry

mscSigChanEIsdnFramerRowStatusEntry 1.3.6.1.4.1.562.36.2.1.115.14.2.1.1
A single entry in the table represents a single mscSigChanEIsdnFramer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnFramerRowStatusEntry  

mscSigChanEIsdnFramerRowStatus 1.3.6.1.4.1.562.36.2.1.115.14.2.1.1.1
This variable is used as the basis for SNMP naming of mscSigChanEIsdnFramer components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

mscSigChanEIsdnFramerComponentName 1.3.6.1.4.1.562.36.2.1.115.14.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mscSigChanEIsdnFramerStorageType 1.3.6.1.4.1.562.36.2.1.115.14.2.1.1.4
This variable represents the storage type value for the mscSigChanEIsdnFramer tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

mscSigChanEIsdnFramerIndex 1.3.6.1.4.1.562.36.2.1.115.14.2.1.1.10
This variable represents the index for the mscSigChanEIsdnFramer tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

mscSigChanEIsdnFramerProvTable 1.3.6.1.4.1.562.36.2.1.115.14.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnFramerProvEntry

mscSigChanEIsdnFramerProvEntry 1.3.6.1.4.1.562.36.2.1.115.14.2.10.1
An entry in the mscSigChanEIsdnFramerProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnFramerProvEntry  

mscSigChanEIsdnFramerInterfaceName 1.3.6.1.4.1.562.36.2.1.115.14.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

mscSigChanEIsdnFramerStateTable 1.3.6.1.4.1.562.36.2.1.115.14.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnFramerStateEntry

mscSigChanEIsdnFramerStateEntry 1.3.6.1.4.1.562.36.2.1.115.14.2.12.1
An entry in the mscSigChanEIsdnFramerStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnFramerStateEntry  

mscSigChanEIsdnFramerAdminState 1.3.6.1.4.1.562.36.2.1.115.14.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscSigChanEIsdnFramerOperationalState 1.3.6.1.4.1.562.36.2.1.115.14.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscSigChanEIsdnFramerUsageState 1.3.6.1.4.1.562.36.2.1.115.14.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscSigChanEIsdnFramerStatsTable 1.3.6.1.4.1.562.36.2.1.115.14.2.13
This group contains the operational statistics data for a Framer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MscSigChanEIsdnFramerStatsEntry

mscSigChanEIsdnFramerStatsEntry 1.3.6.1.4.1.562.36.2.1.115.14.2.13.1
An entry in the mscSigChanEIsdnFramerStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MscSigChanEIsdnFramerStatsEntry  

mscSigChanEIsdnFramerFrmToIf 1.3.6.1.4.1.562.36.2.1.115.14.2.13.1.1
This attribute counts the number of frames transmitted to the link interface by the Framer. This count wraps to zero after exceeding its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnFramerFrmFromIf 1.3.6.1.4.1.562.36.2.1.115.14.2.13.1.2
This attribute counts the number of frames received from the link interface by the Framer. This count wraps to zero after exceeding its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnFramerOctetFromIf 1.3.6.1.4.1.562.36.2.1.115.14.2.13.1.3
This attribute counts the number of bytes received from the link interface by the Framer. This count wraps to zero after exceeding its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnFramerAborts 1.3.6.1.4.1.562.36.2.1.115.14.2.13.1.4
This attribute counts the total number of aborts received. This count wraps to zero after exceeding its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnFramerCrcErrors 1.3.6.1.4.1.562.36.2.1.115.14.2.13.1.5
This attribute counts the total number of frames with CRC errors. This count wraps to zero after exceeding its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnFramerLrcErrors 1.3.6.1.4.1.562.36.2.1.115.14.2.13.1.6
This attribute counts the total number of frames with LRC errors. This count wraps to zero after exceeding its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnFramerNonOctetErrors 1.3.6.1.4.1.562.36.2.1.115.14.2.13.1.7
This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after exceeding its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnFramerOverruns 1.3.6.1.4.1.562.36.2.1.115.14.2.13.1.8
This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after exceeding its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnFramerUnderruns 1.3.6.1.4.1.562.36.2.1.115.14.2.13.1.9
This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after exceeding its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

mscSigChanEIsdnFramerLargeFrmErrors 1.3.6.1.4.1.562.36.2.1.115.14.2.13.1.10
This attribute counts the total number of frames received which were too large (longer than 500 bytes). This count wraps to zero after exceeding its maximum value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vnetEuroIsdnGroup 1.3.6.1.4.1.562.36.2.2.138.1
OBJECT IDENTIFIER    

vnetEuroIsdnGroupCA 1.3.6.1.4.1.562.36.2.2.138.1.1
OBJECT IDENTIFIER    

vnetEuroIsdnGroupCA02 1.3.6.1.4.1.562.36.2.2.138.1.1.3
OBJECT IDENTIFIER    

vnetEuroIsdnGroupCA02A 1.3.6.1.4.1.562.36.2.2.138.1.1.3.2
OBJECT IDENTIFIER    

vnetEuroIsdnCapabilities 1.3.6.1.4.1.562.36.2.2.138.3
OBJECT IDENTIFIER    

vnetEuroIsdnCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.138.3.1
OBJECT IDENTIFIER    

vnetEuroIsdnCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.138.3.1.3
OBJECT IDENTIFIER    

vnetEuroIsdnCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.138.3.1.3.2
OBJECT IDENTIFIER