OMNI-gx2Lm870C-MIB

File: OMNI-gx2Lm870C-MIB.mib (83843 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
RFC-1215	NLS-BBNIDENT-MIB	GX2HFC-MIB
NLSBBN-TRAPS-MIB

Imported symbols

IpAddress	TimeTicks	Counter
OBJECT-TYPE	sysUpTime	DisplayString
TRAP-TYPE	gi	motproxies
gx2Lm870C	trapIdentifier	trapNetworkElemModelNumber
trapNetworkElemSerialNum	trapPerceivedSeverity	trapNetworkElemOperState
trapNetworkElemAlarmStatus	trapNetworkElemAdminState	trapNetworkElemAvailStatus
trapText	trapNETrapLastTrapTimeStamp	trapChangedObjectId
trapChangedValueInteger	trapChangedValueDisplayString

Defined Types

Float
Counter

Gx2Lm870CAnalogEntry
SEQUENCE
	gx2Lm870CAnalogTableIndex	INTEGER
	lm870ClabelFanCurrent	DisplayString	Size(0..80)
	lm870CuomFanCurrent	DisplayString	Size(0..80)
	lm870CmajorHighFanCurrent	Float
	lm870CmajorLowFanCurrent	Float
	lm870CminorHighFanCurrent	Float
	lm870CminorLowFanCurrent	Float
	lm870CcurrentValueFanCurrent	Float
	lm870CstateFlagFanCurrent	INTEGER
	lm870CminValueFanCurrent	Float
	lm870CmaxValueFanCurrent	Float
	lm870CalarmStateFanCurrent	INTEGER
	lm870Clabel12Volt	DisplayString	Size(0..80)
	lm870Cuom12Volt	DisplayString	Size(0..80)
	lm870CmajorHigh12Volt	Float
	lm870CmajorLow12Volt	Float
	lm870CminorHigh12Volt	Float
	lm870CminorLow12Volt	Float
	lm870CcurrentValue12Volt	Float
	lm870CstateFlag12Volt	INTEGER
	lm870CminValue12Volt	Float
	lm870CmaxValue12Volt	Float
	lm870CalarmState12Volt	INTEGER
	lm870ClabelModTemp	DisplayString	Size(0..80)
	lm870CuomModTemp	DisplayString	Size(0..80)
	lm870CmajorHighModTemp	Float
	lm870CmajorLowModTemp	Float
	lm870CminorHighModTemp	Float
	lm870CminorLowModTemp	Float
	lm870CcurrentValueModTemp	Float
	lm870CstateFlagModTemp	INTEGER
	lm870CminValueModTemp	Float
	lm870CmaxValueModTemp	Float
	lm870CalarmStateModTemp	INTEGER
	lm870ClabelOmiOffset	DisplayString	Size(0..80)
	lm870CuomOmiOffset	DisplayString	Size(0..80)
	lm870CmajorHighOmiOffset	Float
	lm870CmajorLowOmiOffset	Float
	lm870CminorHighOmiOffset	Float
	lm870CminorLowOmiOffset	Float
	lm870CcurrentValueOmiOffset	Float
	lm870CstateFlagOmiOffset	INTEGER
	lm870CminValueOmiOffset	Float
	lm870CmaxValueOmiOffset	Float
	lm870CalarmStateOmiOffset	INTEGER
	lm870ClabelOPTPower	DisplayString	Size(0..80)
	lm870CuomOPTPower	DisplayString	Size(0..80)
	lm870CmajorHighOPTPower	Float
	lm870CmajorLowOPTPower	Float
	lm870CminorHighOPTPower	Float
	lm870CminorLowOPTPower	Float
	lm870CcurrentValueOPTPower	Float
	lm870CstateFlagOPTPower	INTEGER
	lm870CminValueOPTPower	Float
	lm870CmaxValueOPTPower	Float
	lm870CalarmStateOPTPower	INTEGER
	lm870ClabelLaserBias	DisplayString	Size(0..80)
	lm870CuomLaserBias	DisplayString	Size(0..80)
	lm870CmajorHighLaserBias	Float
	lm870CmajorLowLaserBias	Float
	lm870CminorHighLaserBias	Float
	lm870CminorLowLaserBias	Float
	lm870CcurrentValueLaserBias	Float
	lm870CstateFlagLaserBias	INTEGER
	lm870CminValueLaserBias	Float
	lm870CmaxValueLaserBias	Float
	lm870CalarmStateLaserBias	INTEGER
	lm870ClabelTecCurrent	DisplayString	Size(0..80)
	lm870CuomTecCurrent	DisplayString	Size(0..80)
	lm870CmajorHighTecCurrent	Float
	lm870CmajorLowTecCurrent	Float
	lm870CminorHighTecCurrent	Float
	lm870CminorLowTecCurrent	Float
	lm870CcurrentValueTecCurrent	Float
	lm870CstateFlagTecCurrent	INTEGER
	lm870CminValueTecCurrent	Float
	lm870CmaxValueTecCurrent	Float
	lm870CalarmStateTecCurrent	INTEGER
	lm870ClabelOmiAlarmSetpoint	DisplayString	Size(0..80)
	lm870CuomOmiAlarmSetpoint	DisplayString	Size(0..80)
	lm870CmajorHighOmiAlarmSetpoint	Float
	lm870CmajorLowOmiAlarmSetpoint	Float
	lm870CminorHighOmiAlarmSetpoint	Float
	lm870CminorLowOmiAlarmSetpoint	Float
	lm870CcurrentValueOmiAlarmSetpoint	Float
	lm870CstateFlagOmiAlarmSetpoint	INTEGER
	lm870CminValueOmiAlarmSetpoint	Float
	lm870CmaxValueOmiAlarmSetpoint	Float
	lm870CalarmStateOmiAlarmSetpoint	INTEGER

Gx2Lm870CDigitalEntry
SEQUENCE
	gx2Lm870CDigitalTableIndex	INTEGER
	lm870ClabelOMIOffsetAlarms	DisplayString	Size(0..80)
	lm870CenumOMIOffsetAlarms	DisplayString	Size(0..80)
	lm870CvalueOMIOffsetAlarms	INTEGER
	lm870CstateFlagOMIOffsetAlarms	INTEGER
	lm870ClabelFactoryDefault	DisplayString	Size(0..80)
	lm870CenumFactoryDefault	DisplayString	Size(0..80)
	lm870CvalueFactoryDefault	INTEGER
	lm870CstateFlagFactoryDefault	INTEGER
	lm870ClabelOMISetpoint	DisplayString	Size(0..80)
	lm870CenumOMISetpoint	DisplayString	Size(0..80)
	lm870CvalueOMISetpoint	INTEGER
	lm870CstateFlagOMISetpoint	INTEGER

Gx2Lm870CStatusEntry
SEQUENCE
	gx2Lm870CStatusTableIndex	INTEGER
	lm870ClabelBoot	DisplayString	Size(0..80)
	lm870CvalueBoot	INTEGER
	lm870CstateflagBoot	INTEGER
	lm870ClabelFlash	DisplayString	Size(0..80)
	lm870CvalueFlash	INTEGER
	lm870CstateflagFlash	INTEGER
	lm870ClabelRFOverload	DisplayString	Size(0..80)
	lm870CvalueRFOverload	INTEGER
	lm870CstateflagRFOverload	INTEGER
	lm870ClabelRFPower	DisplayString	Size(0..80)
	lm870CvalueRFPower	INTEGER
	lm870CstateflagRFPower	INTEGER
	lm870ClabelFactoryDataCRC	DisplayString	Size(0..80)
	lm870CvalueFactoryDataCRC	INTEGER
	lm870CstateflagFactoryDataCRC	INTEGER
	lm870ClabelAlarmDataCrc	DisplayString	Size(0..80)
	lm870CvalueAlarmDataCrc	INTEGER
	lm870CstateflagAlarmDataCrc	INTEGER
	lm870ClabelModSetDataCRC	DisplayString	Size(0..80)
	lm870CvalueModSetDataCRC	INTEGER
	lm870CstateflagModSetDataCRC	INTEGER
	lm870ClabelOptCalDataCRC	DisplayString	Size(0..80)
	lm870CvalueOptCalDataCRC	INTEGER
	lm870CstateflagOptCalDataCRC	INTEGER
	lm870ClabelRFCalDataCRC	DisplayString	Size(0..80)
	lm870CvalueRFCalDataCRC	INTEGER
	lm870CstateflagRFCalDataCRC	INTEGER

Gx2Lm870CFactoryEntry
SEQUENCE
	gx2Lm870CFactoryTableIndex	INTEGER
	lm870CbootControlByte	INTEGER
	lm870CbootStatusByte	INTEGER
	lm870Cbank1CRC	INTEGER
	lm870Cbank2CRC	INTEGER
	lm870CprgEEPROMByte	INTEGER
	lm870CfactoryCRC	INTEGER
	lm870CcalculateCRC	INTEGER
	lm870ChourMeter	INTEGER
	lm870CflashPrgCntA	INTEGER
	lm870CflashPrgCntB	INTEGER
	lm870CflashBankARev	DisplayString	Size(0..80)
	lm870CflashBankBRev	DisplayString	Size(0..80)

Defined Values

gx2Lm870CDescriptor		1.3.6.1.4.1.1166.6.1.2.10.1
OBJECT IDENTIFIER

gx2lm870CAnalogTable		1.3.6.1.4.1.1166.6.1.2.10.2
This table contains gx2Lm870C specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Lm870CAnalogEntry

gx2lm870CAnalogEntry		1.3.6.1.4.1.1166.6.1.2.10.2.1
This list contains the analog parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Lm870CAnalogEntry

gx2lm870CDigitalTable		1.3.6.1.4.1.1166.6.1.2.10.3
This table contains gx2Lm870C specific parameters with discrete values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Lm870CDigitalEntry

gx2lm870CDigitalEntry		1.3.6.1.4.1.1166.6.1.2.10.3.2
This list contains digital parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Lm870CDigitalEntry

gx2lm870CStatusTable		1.3.6.1.4.1.1166.6.1.2.10.4
This table contains gx2Lm870C specific parameters with current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Lm870CStatusEntry

gx2lm870CStatusEntry		1.3.6.1.4.1.1166.6.1.2.10.4.3
This list contains Status parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Lm870CStatusEntry

gx2lm870CFactoryTable		1.3.6.1.4.1.1166.6.1.2.10.5
This table contains gx2Lm870C specific parameters with stored factory values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Lm870CFactoryEntry

gx2lm870CFactoryEntry		1.3.6.1.4.1.1166.6.1.2.10.5.4
This list contains Factory parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Lm870CFactoryEntry

gx2Lm870CAnalogTableIndex		1.3.6.1.4.1.1166.6.1.2.10.2.1.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

lm870ClabelFanCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.2
The value of this object provides the label of the Fan Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CuomFanCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.3
The value of this object provides the Unit of Measure of the Fan Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CmajorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.4
The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmajorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.5
The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.6
The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.7
The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CcurrentValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.8
The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CstateFlagFanCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.9
The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870CminValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.10
The value of this object provides the minimum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmaxValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.11
The value of this object provides the maximum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CalarmStateFanCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.12
The value of this object provides the curent alarm state of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

lm870Clabel12Volt		1.3.6.1.4.1.1166.6.1.2.10.2.1.13
The value of this object provides the label of the 12v Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870Cuom12Volt		1.3.6.1.4.1.1166.6.1.2.10.2.1.14
The value of this object provides the Unit of Measure of the 12v Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CmajorHigh12Volt		1.3.6.1.4.1.1166.6.1.2.10.2.1.15
The value of this object provides the Major High alarm value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmajorLow12Volt		1.3.6.1.4.1.1166.6.1.2.10.2.1.16
The value of this object provides the Major Low alarm value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorHigh12Volt		1.3.6.1.4.1.1166.6.1.2.10.2.1.17
The value of this object provides the Minor High alarm value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorLow12Volt		1.3.6.1.4.1.1166.6.1.2.10.2.1.18
The value of this object provides the Minor Low alarm value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CcurrentValue12Volt		1.3.6.1.4.1.1166.6.1.2.10.2.1.19
The value of this object provides the Current value of the 12v Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CstateFlag12Volt		1.3.6.1.4.1.1166.6.1.2.10.2.1.20
The value of this object provides the state of the 12v Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870CminValue12Volt		1.3.6.1.4.1.1166.6.1.2.10.2.1.21
The value of this object provides the minimum value the 12v Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmaxValue12Volt		1.3.6.1.4.1.1166.6.1.2.10.2.1.22
The value of this object provides the maximum value the 12v Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CalarmState12Volt		1.3.6.1.4.1.1166.6.1.2.10.2.1.23
The value of this object provides the curent alarm state of the 12v Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

lm870ClabelModTemp		1.3.6.1.4.1.1166.6.1.2.10.2.1.24
The value of this object provides the label of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CuomModTemp		1.3.6.1.4.1.1166.6.1.2.10.2.1.25
The value of this object provides the Unit of Measure of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CmajorHighModTemp		1.3.6.1.4.1.1166.6.1.2.10.2.1.26
The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmajorLowModTemp		1.3.6.1.4.1.1166.6.1.2.10.2.1.27
The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorHighModTemp		1.3.6.1.4.1.1166.6.1.2.10.2.1.28
The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorLowModTemp		1.3.6.1.4.1.1166.6.1.2.10.2.1.29
The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CcurrentValueModTemp		1.3.6.1.4.1.1166.6.1.2.10.2.1.30
The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CstateFlagModTemp		1.3.6.1.4.1.1166.6.1.2.10.2.1.31
The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870CminValueModTemp		1.3.6.1.4.1.1166.6.1.2.10.2.1.32
The value of this object provides the minimum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmaxValueModTemp		1.3.6.1.4.1.1166.6.1.2.10.2.1.33
The value of this object provides the maximum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CalarmStateModTemp		1.3.6.1.4.1.1166.6.1.2.10.2.1.34
The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

lm870ClabelOmiOffset		1.3.6.1.4.1.1166.6.1.2.10.2.1.35
The value of this object provides the label of the OMI Offset Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CuomOmiOffset		1.3.6.1.4.1.1166.6.1.2.10.2.1.36
The value of this object provides the Unit of Measure of the OMI Offset Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CmajorHighOmiOffset		1.3.6.1.4.1.1166.6.1.2.10.2.1.37
The value of this object provides the Major High alarm value of the OMI Offset Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmajorLowOmiOffset		1.3.6.1.4.1.1166.6.1.2.10.2.1.38
The value of this object provides the Major Low alarm value of the OMI Offset Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorHighOmiOffset		1.3.6.1.4.1.1166.6.1.2.10.2.1.39
The value of this object provides the Minor High alarm value of the OMI Offset Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorLowOmiOffset		1.3.6.1.4.1.1166.6.1.2.10.2.1.40
The value of this object provides the Minor Low alarm value of the OMI Offset Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CcurrentValueOmiOffset		1.3.6.1.4.1.1166.6.1.2.10.2.1.41
The value of this object provides the Current value of the OMI Offset Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CstateFlagOmiOffset		1.3.6.1.4.1.1166.6.1.2.10.2.1.42
The value of this object provides the state of the OMI Offset Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870CminValueOmiOffset		1.3.6.1.4.1.1166.6.1.2.10.2.1.43
The value of this object provides the minimum value the OMI Offset Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmaxValueOmiOffset		1.3.6.1.4.1.1166.6.1.2.10.2.1.44
The value of this object provides the maximum value the OMI Offset Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CalarmStateOmiOffset		1.3.6.1.4.1.1166.6.1.2.10.2.1.45
The value of this object provides the curent alarm state of the OMI Offset Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

lm870ClabelOPTPower		1.3.6.1.4.1.1166.6.1.2.10.2.1.46
The value of this object provides the label of the Optical Power Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CuomOPTPower		1.3.6.1.4.1.1166.6.1.2.10.2.1.47
The value of this object provides the Unit of Measure of the Optical Power Analog parameter..
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CmajorHighOPTPower		1.3.6.1.4.1.1166.6.1.2.10.2.1.48
The value of this object provides the Major High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmajorLowOPTPower		1.3.6.1.4.1.1166.6.1.2.10.2.1.49
The value of this object provides the Major Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorHighOPTPower		1.3.6.1.4.1.1166.6.1.2.10.2.1.50
The value of this object provides the Minor High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorLowOPTPower		1.3.6.1.4.1.1166.6.1.2.10.2.1.51
The value of this object provides the Minor Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CcurrentValueOPTPower		1.3.6.1.4.1.1166.6.1.2.10.2.1.52
The value of this object provides the Current value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CstateFlagOPTPower		1.3.6.1.4.1.1166.6.1.2.10.2.1.53
The value of this object provides the state of the Optical Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870CminValueOPTPower		1.3.6.1.4.1.1166.6.1.2.10.2.1.54
The value of this object provides the minimum value the Optical Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmaxValueOPTPower		1.3.6.1.4.1.1166.6.1.2.10.2.1.55
The value of this object provides the maximum value the Optical Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CalarmStateOPTPower		1.3.6.1.4.1.1166.6.1.2.10.2.1.56
The value of this object provides the curent alarm state of the Optical Power Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

lm870ClabelLaserBias		1.3.6.1.4.1.1166.6.1.2.10.2.1.57
The value of this object provides the label of the Laser Bias Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CuomLaserBias		1.3.6.1.4.1.1166.6.1.2.10.2.1.58
The value of this object provides the Unit of Measure of the Laser Bias Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CmajorHighLaserBias		1.3.6.1.4.1.1166.6.1.2.10.2.1.59
The value of this object provides the Major High alarm value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmajorLowLaserBias		1.3.6.1.4.1.1166.6.1.2.10.2.1.60
The value of this object provides the Major Low alarm value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorHighLaserBias		1.3.6.1.4.1.1166.6.1.2.10.2.1.61
The value of this object provides the Minor High alarm value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorLowLaserBias		1.3.6.1.4.1.1166.6.1.2.10.2.1.62
The value of this object provides the Minor Low alarm value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CcurrentValueLaserBias		1.3.6.1.4.1.1166.6.1.2.10.2.1.63
The value of this object provides the Current value of the Laser Bias Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CstateFlagLaserBias		1.3.6.1.4.1.1166.6.1.2.10.2.1.64
The value of this object provides the state of the Laser Bias Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870CminValueLaserBias		1.3.6.1.4.1.1166.6.1.2.10.2.1.65
The value of this object provides the minimum value the Laser Bias Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmaxValueLaserBias		1.3.6.1.4.1.1166.6.1.2.10.2.1.66
The value of this object provides the maximum value the Laser Bias Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CalarmStateLaserBias		1.3.6.1.4.1.1166.6.1.2.10.2.1.67
The value of this object provides the curent alarm state of the Laser Bias Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

lm870ClabelTecCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.68
The value of this object provides the label of the TEC Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CuomTecCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.69
The value of this object provides the Unit of Measure of the TEC Current Analog parameter..
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CmajorHighTecCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.70
The value of this object provides the Major High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmajorLowTecCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.71
The value of this object provides the Major Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorHighTecCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.72
The value of this object provides the Minor High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorLowTecCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.73
The value of this object provides the Minor Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CcurrentValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.74
The value of this object provides the Current value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CstateFlagTecCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.75
The value of this object provides the state of the TEC Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870CminValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.76
The value of this object provides the minimum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmaxValueTecCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.77
The value of this object provides the maximum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CalarmStateTecCurrent		1.3.6.1.4.1.1166.6.1.2.10.2.1.78
The value of this object provides the curent alarm state of the TEC Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

lm870ClabelOmiAlarmSetpoint		1.3.6.1.4.1.1166.6.1.2.10.2.1.79
The value of this object provides the label of the OMI Offset Alarm Setpoint Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CuomOmiAlarmSetpoint		1.3.6.1.4.1.1166.6.1.2.10.2.1.80
The value of this object provides the Unit of Measure of the OMI Offset Alarm Setpoint Analog parameter..
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CmajorHighOmiAlarmSetpoint		1.3.6.1.4.1.1166.6.1.2.10.2.1.81
The value of this object provides the Major High alarm value of the OMI Offset Alarm Setpoint Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmajorLowOmiAlarmSetpoint		1.3.6.1.4.1.1166.6.1.2.10.2.1.82
The value of this object provides the Major Low alarm value of the OMI Offset Alarm Setpoint Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorHighOmiAlarmSetpoint		1.3.6.1.4.1.1166.6.1.2.10.2.1.83
The value of this object provides the Minor High alarm value of the OMI Offset Alarm Setpoint Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CminorLowOmiAlarmSetpoint		1.3.6.1.4.1.1166.6.1.2.10.2.1.84
The value of this object provides the Minor Low alarm value of the OMI Offset Alarm Setpoint Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CcurrentValueOmiAlarmSetpoint		1.3.6.1.4.1.1166.6.1.2.10.2.1.85
The value of this object provides the Current value of the OMI Offset Alarm Setpoint Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CstateFlagOmiAlarmSetpoint		1.3.6.1.4.1.1166.6.1.2.10.2.1.86
The value of this object provides the state of the OMI Offset Alarm Setpoint Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870CminValueOmiAlarmSetpoint		1.3.6.1.4.1.1166.6.1.2.10.2.1.87
The value of this object provides the minimum value the OMI Offset Alarm Setpoint Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CmaxValueOmiAlarmSetpoint		1.3.6.1.4.1.1166.6.1.2.10.2.1.88
The value of this object provides the maximum value the OMI Offset Alarm Setpoint Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

lm870CalarmStateOmiAlarmSetpoint		1.3.6.1.4.1.1166.6.1.2.10.2.1.89
The value of this object provides the curent alarm state of the OMI Offset Alarm Setpoint Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gx2Lm870CDigitalTableIndex		1.3.6.1.4.1.1166.6.1.2.10.3.2.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

lm870ClabelOMIOffsetAlarms		1.3.6.1.4.1.1166.6.1.2.10.3.2.2
The value of this object provides the label of the OMI Offset Alarm mode Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CenumOMIOffsetAlarms		1.3.6.1.4.1.1166.6.1.2.10.3.2.3
The value of this object represents the Enumeration values possible for the OMI Offset Alarm modeDigital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CvalueOMIOffsetAlarms		1.3.6.1.4.1.1166.6.1.2.10.3.2.4
The value of this object is the current value of the parameter. Note that the value to be read will always be 1 or 2 because the set value (3) is always changed to the on value (2) by the firmware
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2), set(3)

lm870CstateFlagOMIOffsetAlarms		1.3.6.1.4.1.1166.6.1.2.10.3.2.5
The value of this object provides the state of the OMI Offset Alarm mode Digital parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870ClabelFactoryDefault		1.3.6.1.4.1.1166.6.1.2.10.3.2.6
The value of this object provides the label of the Reset to Factory Default Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CenumFactoryDefault		1.3.6.1.4.1.1166.6.1.2.10.3.2.7
The value of this object represents the Enumeration values possible for the Reste to Factory Default Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CvalueFactoryDefault		1.3.6.1.4.1.1166.6.1.2.10.3.2.8
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

lm870CstateFlagFactoryDefault		1.3.6.1.4.1.1166.6.1.2.10.3.2.9
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870ClabelOMISetpoint		1.3.6.1.4.1.1166.6.1.2.10.3.2.10
The value of this object provides the label of the OMI Setpoint Digital parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CenumOMISetpoint		1.3.6.1.4.1.1166.6.1.2.10.3.2.11
The value of this object represents the Enumeration values possible for the OMI Setpoint Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: obsolete	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CvalueOMISetpoint		1.3.6.1.4.1.1166.6.1.2.10.3.2.12
The value of this object is the current value of the OMI Setpoint parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER

lm870CstateFlagOMISetpoint		1.3.6.1.4.1.1166.6.1.2.10.3.2.13
The value of this object provides the state of the OMI Setpoint Digital parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2Lm870CStatusTableIndex		1.3.6.1.4.1.1166.6.1.2.10.4.3.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

lm870ClabelBoot		1.3.6.1.4.1.1166.6.1.2.10.4.3.2
The value of this object provides the label of the Boot Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CvalueBoot		1.3.6.1.4.1.1166.6.1.2.10.4.3.3
The value of this object provides the current value of the boot status parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

lm870CstateflagBoot		1.3.6.1.4.1.1166.6.1.2.10.4.3.4
The value of this object provides the state of the the boot status parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870ClabelFlash		1.3.6.1.4.1.1166.6.1.2.10.4.3.5
The value of this object provides the label of the Flash Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CvalueFlash		1.3.6.1.4.1.1166.6.1.2.10.4.3.6
The value of this object provides the current value of the Flash Status parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

lm870CstateflagFlash		1.3.6.1.4.1.1166.6.1.2.10.4.3.7
The value of this object provides the state current of the the Flash Status parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870ClabelRFOverload		1.3.6.1.4.1.1166.6.1.2.10.4.3.8
The value of this object provides the label for the RF Overload Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CvalueRFOverload		1.3.6.1.4.1.1166.6.1.2.10.4.3.9
The value of this object provides the current value of the RF Overload parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

lm870CstateflagRFOverload		1.3.6.1.4.1.1166.6.1.2.10.4.3.10
The value of this object provides the current state of the RF Overload parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870ClabelRFPower		1.3.6.1.4.1.1166.6.1.2.10.4.3.11
The value of this object provides the label for the RF Power Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CvalueRFPower		1.3.6.1.4.1.1166.6.1.2.10.4.3.12
The value of this object provides the current value of the RF Power parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

lm870CstateflagRFPower		1.3.6.1.4.1.1166.6.1.2.10.4.3.13
The value of this object provides the current state of the RF Power parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870ClabelFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.10.4.3.14
The value of this object provides the label of the Factory Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CvalueFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.10.4.3.15
The value of this object provides the current value of the Factory Data CRC parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

lm870CstateflagFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.10.4.3.16
The value of this object provides the current state of the the Factory Data CRC parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870ClabelAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.10.4.3.17
The value of this object provides the label of the Alarm Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CvalueAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.10.4.3.18
The value of this object provides the current value of the Alarm Data Crc parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

lm870CstateflagAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.10.4.3.19
The value of this object provides the current state of the the Alarm Data Crc parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870ClabelModSetDataCRC		1.3.6.1.4.1.1166.6.1.2.10.4.3.20
The value of this object provides the label of the Module Settings Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CvalueModSetDataCRC		1.3.6.1.4.1.1166.6.1.2.10.4.3.21
The value of this object provides the current value of the Module Settings Data Crc parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

lm870CstateflagModSetDataCRC		1.3.6.1.4.1.1166.6.1.2.10.4.3.22
The value of this object provides the current state of the the Module Settings Data Crc parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870ClabelOptCalDataCRC		1.3.6.1.4.1.1166.6.1.2.10.4.3.23
The value of this object provides the label of the Optical Calibration Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CvalueOptCalDataCRC		1.3.6.1.4.1.1166.6.1.2.10.4.3.24
The value of this object provides the current value of the Optical Calibration Data Crc parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

lm870CstateflagOptCalDataCRC		1.3.6.1.4.1.1166.6.1.2.10.4.3.25
The value of this object provides the current state of the the Optical Calibration Data Crc parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

lm870ClabelRFCalDataCRC		1.3.6.1.4.1.1166.6.1.2.10.4.3.26
The value of this object provides the label of the RF Calibration Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CvalueRFCalDataCRC		1.3.6.1.4.1.1166.6.1.2.10.4.3.27
The value of this object provides the current value of the RF Calibration Data Crc parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

lm870CstateflagRFCalDataCRC		1.3.6.1.4.1.1166.6.1.2.10.4.3.28
The value of this object provides the current state of the the RF Calibration Data Crc parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2Lm870CFactoryTableIndex		1.3.6.1.4.1.1166.6.1.2.10.5.4.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

lm870CbootControlByte		1.3.6.1.4.1.1166.6.1.2.10.5.4.2
The value of this object indicates which bank the firmware is currently being boot from.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lm870CbootStatusByte		1.3.6.1.4.1.1166.6.1.2.10.5.4.3
This object indicates the status of the last boot
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lm870Cbank1CRC		1.3.6.1.4.1.1166.6.1.2.10.5.4.4
This object provides the CRC code of bank 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lm870Cbank2CRC		1.3.6.1.4.1.1166.6.1.2.10.5.4.5
This object provides the CRC code of bank 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lm870CprgEEPROMByte		1.3.6.1.4.1.1166.6.1.2.10.5.4.6
This object indicates if the EEPROM has been programmed
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lm870CfactoryCRC		1.3.6.1.4.1.1166.6.1.2.10.5.4.7
This object provides the CRC code for the Factory data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lm870CcalculateCRC		1.3.6.1.4.1.1166.6.1.2.10.5.4.8
This object indicates which of the Emnums will have the CRC calculated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	factory(1), settings(2), alarm(3), opticalCal(4), rfCal(5)

lm870ChourMeter		1.3.6.1.4.1.1166.6.1.2.10.5.4.9
This object provides the hour meter reading of the module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lm870CflashPrgCntA		1.3.6.1.4.1.1166.6.1.2.10.5.4.10
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lm870CflashPrgCntB		1.3.6.1.4.1.1166.6.1.2.10.5.4.11
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

lm870CflashBankARev		1.3.6.1.4.1.1166.6.1.2.10.5.4.12
This object provides the revision of flash bank 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

lm870CflashBankBRev		1.3.6.1.4.1.1166.6.1.2.10.5.4.13
This object provides the revision of flash bank 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

trapLM870CConfigChangeInteger		1
This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapLMCConfigChangeDisplayString		2
This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapLMCFanCurrentAlarm		3
This trap is issued when the Laser Modules Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapLMC12vAlarm		4
This trap is issued when the Laser Modules 12 Volt parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapLMCModuleTempAlarm		5
This trap is issued when the Laser Module Temperature goes out of range.
TRAP-TYPE

trapLMCRFPowerAlarm		6
This trap is issued when the Laser Modules RF Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapLMCOPTPowerAlarm		7
This trap is issued when the Laser Modules Optical Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapLMCLaserBiasAlarm		8
This trap is issued when the Laser Bias parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapLMCTECCurrentAlarm		9
This trap is issued when the Laser Modules TEC Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapLMCFlashAlarm		10
This trap is issued when the Laser Modules detects an error during Flash memory operations.
TRAP-TYPE

trapLMCBankBootAlarm		11
This trap is issued when the Laser Modules detects an error while booting from bank 0 or bank 1.
TRAP-TYPE

trapLMCAlarmDataCRCAlarm		12
This trap is issued when the Alarm Data CRC is incorrect.
TRAP-TYPE

trapLMCModSetDataCRCAlarm		13
This trap is issued when the Module Settings CRC is incorrect.
TRAP-TYPE

trapLMCFactoryDataCRCAlarm		14
This trap is issued when the Factory Data CRC is incorrect.
TRAP-TYPE

trapLMCResetFactoryDefaultAlarm		15
This trap is issued when the Factory Default Reset occurs.
TRAP-TYPE

trapLMCOPCalDataCRCAlarm		16
This trap is issued when the Optical Calibration Data CRC is incorrect.
TRAP-TYPE

trapLMCRFCalDataCRCAlarm		17
This trap is issued when the RF Calibration Data CRC is incorrect.
TRAP-TYPE

trapLMCRFOverloadAlarm		18
This trap is issued when the RF Overload alarm occurs.
TRAP-TYPE

trapLMCOMIoffsetAlarm		19
This trap is issued when an OMI Offset alarm occurs.
TRAP-TYPE