OMNI-gx2OSW10B-MIB

File: OMNI-gx2OSW10B-MIB.mib (86405 bytes)

Imported modules

RFC1155-SMI GX2HFC-MIB NLSBBN-TRAPS-MIB

Imported symbols

IpAddress TimeTicks Counter
DisplayString gx2Osw10b trapIdentifier
trapNetworkElemModelNumber trapNetworkElemSerialNum trapPerceivedSeverity
trapNetworkElemOperState trapNetworkElemAlarmStatus trapNetworkElemAdminState
trapNetworkElemAvailStatus trapText trapNETrapLastTrapTimeStamp
trapChangedObjectId trapChangedValueInteger trapChangedValueDisplayString

Defined Types

Float  
Counter    

Gx2Osw10bAnalogEntry  
SEQUENCE    
  gx2Osw10bAnalogTableIndex INTEGER
  osw10blabelPriOpticalInputLevel DisplayString Size(0..80)
  osw10buomPriOpticalInputLevel DisplayString Size(0..80)
  osw10bmajorHighPriOpticalInputLevel Float
  osw10bmajorLowPriOpticalInputLevel Float
  osw10bminorHighPriOpticalInputLevel Float
  osw10bminorLowPriOpticalInputLevel Float
  osw10bcurrentValuePriOpticalInputLevel Float
  osw10bstateFlagPriOpticalInputLevel INTEGER
  osw10bminValuePriOpticalInputLevel Float
  osw10bmaxValuePriOpticalInputLevel Float
  osw10balarmStatePriOpticalInputLevel INTEGER
  osw10blabelSecOpticalInputLevel DisplayString Size(0..80)
  osw10buomSecOpticalInputLevel DisplayString Size(0..80)
  osw10bmajorHighSecOpticalInputLevel Float
  osw10bmajorLowSecOpticalInputLevel Float
  osw10bminorHighSecOpticalInputLevel Float
  osw10bminorLowSecOpticalInputLevel Float
  osw10bcurrentValueSecOpticalInputLevel Float
  osw10bstateFlagSecOpticalInputLevel INTEGER
  osw10bminValueSecOpticalInputLevel Float
  osw10bmaxValueSecOpticalInputLevel Float
  osw10balarmStateSecOpticalInputLevel INTEGER
  osw10blabelPriOpticalThreshold DisplayString Size(0..80)
  osw10buomPriOpticalThreshold DisplayString Size(0..80)
  osw10bmajorHighPriOpticalThreshold Float
  osw10bmajorLowPriOpticalThreshold Float
  osw10bminorHighPriOpticalThreshold Float
  osw10bminorLowPriOpticalThreshold Float
  osw10bcurrentValuePriOpticalThreshold Float
  osw10bstateFlagPriOpticalThreshold INTEGER
  osw10bminValuePriOpticalThreshold Float
  osw10bmaxValuePriOpticalThreshold Float
  osw10balarmStatePriOpticalThreshold INTEGER
  osw10blabelSecOpticalThreshold DisplayString Size(0..80)
  osw10buomSecOpticalThreshold DisplayString Size(0..80)
  osw10bmajorHighSecOpticalThreshold Float
  osw10bmajorLowSecOpticalThreshold Float
  osw10bminorHighSecOpticalThreshold Float
  osw10bminorLowSecOpticalThreshold Float
  osw10bcurrentValueSecOpticalThreshold Float
  osw10bstateFlagSecOpticalThreshold INTEGER
  osw10bminValueSecOpticalThreshold Float
  osw10bmaxValueSecOpticalThreshold Float
  osw10balarmStateSecOpticalThreshold INTEGER
  osw10blabelModTemp DisplayString Size(0..80)
  osw10buomModTemp DisplayString Size(0..80)
  osw10bmajorHighModTemp Float
  osw10bmajorLowModTemp Float
  osw10bminorHighModTemp Float
  osw10bminorLowModTemp Float
  osw10bcurrentValueModTemp Float
  osw10bstateFlagModTemp INTEGER
  osw10bminValueModTemp Float
  osw10bmaxValueModTemp Float
  osw10balarmStateModTemp INTEGER
  osw10blabelFanCurrent DisplayString Size(0..80)
  osw10buomFanCurrent DisplayString Size(0..80)
  osw10bmajorHighFanCurrent Float
  osw10bmajorLowFanCurrent Float
  osw10bminorHighFanCurrent Float
  osw10bminorLowFanCurrent Float
  osw10bcurrentValueFanCurrent Float
  osw10bstateFlagFanCurrent INTEGER
  osw10bminValueFanCurrent Float
  osw10bmaxValueFanCurrent Float
  osw10balarmStateFanCurrent INTEGER

Gx2Osw10bDigitalEntry  
SEQUENCE    
  gx2Osw10bDigitalTableIndex INTEGER
  osw10blabelSwitchControl DisplayString Size(0..80)
  osw10benumSwitchControl DisplayString Size(0..80)
  osw10bvalueSwitchControl INTEGER
  osw10bstateflagSwitchControl INTEGER
  osw10blabelSwitchMode DisplayString Size(0..80)
  osw10benumSwitchMode DisplayString Size(0..80)
  osw10bvalueSwitchMode INTEGER
  osw10bstateflagSwitchMode INTEGER
  osw10blabelRevertMode DisplayString Size(0..80)
  osw10benumRevertMode DisplayString Size(0..80)
  osw10bvalueRevertMode INTEGER
  osw10bstateflagRevertMode INTEGER
  osw10blabelRevertTime DisplayString Size(0..80)
  osw10benumRevertTime DisplayString Size(0..80)
  osw10bvalueRevertTime INTEGER
  osw10bstateflagRevertTime INTEGER
  osw10blabelWavelength DisplayString Size(0..80)
  osw10benumWavelength DisplayString Size(0..80)
  osw10bvalueWavelength INTEGER
  osw10bstateflagWavelength INTEGER
  osw10blabelSwitchMonitor DisplayString Size(0..80)
  osw10benumSwitchMonitor DisplayString Size(0..80)
  osw10bvalueSwitchMonitor INTEGER
  osw10bstateflagSwitchMonitor INTEGER
  osw10blabelOperationMode DisplayString Size(0..80)
  osw10benumOperationMode DisplayString Size(0..80)
  osw10bvalueOperationMode INTEGER
  osw10bstateflagOperationMode INTEGER
  osw10blabelFactoryDefault DisplayString Size(0..80)
  osw10benumFactoryDefault DisplayString Size(0..80)
  osw10bvalueFactoryDefault INTEGER
  osw10bstateflagFactoryDefault INTEGER

Gx2Osw10bStatusEntry  
SEQUENCE    
  gx2Osw10bStatusTableIndex INTEGER
  osw10blabelBoot DisplayString Size(0..80)
  osw10bvalueBoot INTEGER
  osw10bstateflagBoot INTEGER
  osw10blabelFlash DisplayString Size(0..80)
  osw10bvalueFlash INTEGER
  osw10bstateflagFlash INTEGER
  osw10blabelFactoryDataCRC DisplayString Size(0..80)
  osw10bvalueFactoryDataCRC INTEGER
  osw10bstateflagFactoryDataCRC INTEGER
  osw10blabelCalibrateTableStatus DisplayString Size(0..80)
  osw10bvalueCalibrateTableStatus INTEGER
  osw10bstateflagCalibrateTableStatus INTEGER
  osw10blabelAlarmDataCrc DisplayString Size(0..80)
  osw10bvalueAlarmDataCrc INTEGER
  osw10bstateflagAlarmDataCrc INTEGER
  osw10blabelInputStatus DisplayString Size(0..80)
  osw10bvalueInputStatus INTEGER
  osw10bstateflagInputStatus INTEGER
  osw10blabelPriActiveStatus DisplayString Size(0..80)
  osw10bvaluePriActiveStatus INTEGER
  osw10bstateflagPriActiveStatus INTEGER
  osw10blabelHardwareErr DisplayString Size(0..80)
  osw10bvalueHardwareErr INTEGER
  osw10bstateflagHardwareErr INTEGER
  osw10blabelPriThresholdStatus DisplayString Size(0..80)
  osw10bvaluePriThresholdStatus INTEGER
  osw10bstateflagPriThresholdStatus INTEGER
  osw10blabelSecThresholdStatus DisplayString Size(0..80)
  osw10bvalueSecThresholdStatus INTEGER
  osw10bstateflagSecThresholdStatus INTEGER

Gx2Osw10bFactoryEntry  
SEQUENCE    
  gx2Osw10bFactoryTableIndex INTEGER
  osw10bbootControlByte INTEGER
  osw10bbootStatusByte INTEGER
  osw10bbank1CRC INTEGER
  osw10bbank2CRC INTEGER
  osw10bprgEEPROMByte INTEGER
  osw10bfactoryCRC INTEGER
  osw10bcalculateCRC INTEGER
  osw10bhourMeter INTEGER
  osw10bflashPrgCntA INTEGER
  osw10bflashPrgCntB INTEGER
  osw10bflashBankARev DisplayString Size(0..80)
  osw10bflashBankBRev DisplayString Size(0..80)

Gx2Osw10bHoldTimeEntry  
SEQUENCE    
  rxgx2Osw10bHoldTimeTableIndex INTEGER
  rxgx2Osw10bHoldTimeSpecIndex INTEGER
  rxgx2Osw10bHoldTimeData INTEGER

Defined Values

gx2Osw10bDescriptor 1.3.6.1.4.1.1166.6.1.2.15.1
OBJECT IDENTIFIER    

gx2Osw10bAnalogTable 1.3.6.1.4.1.1166.6.1.2.15.2
This table contains gx2Osw10b specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Osw10bAnalogEntry

gx2Osw10bAnalogEntry 1.3.6.1.4.1.1166.6.1.2.15.2.1
This list contains the analog parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Osw10bAnalogEntry  

gx2Osw10bDigitalTable 1.3.6.1.4.1.1166.6.1.2.15.3
This table contains gx2Osw10b specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Osw10bDigitalEntry

gx2Osw10bDigitalEntry 1.3.6.1.4.1.1166.6.1.2.15.3.2
This list contains digital parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Osw10bDigitalEntry  

gx2Osw10bStatusTable 1.3.6.1.4.1.1166.6.1.2.15.4
This table contains gx2Osw10b specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Osw10bStatusEntry

gx2Osw10bStatusEntry 1.3.6.1.4.1.1166.6.1.2.15.4.3
This list contains Status parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Osw10bStatusEntry  

gx2Osw10bFactoryTable 1.3.6.1.4.1.1166.6.1.2.15.5
This table contains gx2Osw10b specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Osw10bFactoryEntry

gx2Osw10bFactoryEntry 1.3.6.1.4.1.1166.6.1.2.15.5.4
This list contains Factory parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Osw10bFactoryEntry  

gx2Osw10bHoldTimeTable 1.3.6.1.4.1.1166.6.1.2.15.6
This table contains gx2Osw10b specific parameters with nominal and current values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Gx2Osw10bHoldTimeEntry

gx2Osw10bHoldTimeEntry 1.3.6.1.4.1.1166.6.1.2.15.6.5
This list contains digital product class and the associated RF channel parameters and descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gx2Osw10bHoldTimeEntry  

gx2Osw10bAnalogTableIndex 1.3.6.1.4.1.1166.6.1.2.15.2.1.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4294967295  

osw10blabelPriOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.2
The value of this object provides the label of the Primary Optical Input Level Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10buomPriOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.3
The value of this object provides the Unit of Measure of the Primary Optical Input Level Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bmajorHighPriOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.4
The value of this object provides the Major High alarm value of the Primary Optical Input Level Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bmajorLowPriOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.5
The value of this object provides the Major Low alarm value of the Primary Optical Input Level Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bminorHighPriOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.6
The value of this object provides the Minor High alarm value of the Primary Optical Input Level Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bminorLowPriOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.7
The value of this object provides the Minor Low alarm value of the Primary Optical Input Level Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bcurrentValuePriOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.8
The value of this object provides the Current value of the Primary Optical Input Level Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bstateFlagPriOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.9
The value of this object provides the state of the Primary Optical Input Level Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10bminValuePriOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.10
The value of this object provides the minimum value the Primary Optical Input Level Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bmaxValuePriOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.11
The value of this object provides the maximum value the Primary Optical Input Level Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10balarmStatePriOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.12
The value of this object provides the current alarm state of the Primary Optical Input Level Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

osw10blabelSecOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.13
The value of this object provides the label of the Secondary Optical Input Level Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10buomSecOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.14
The value of this object provides the Unit of Measure of the Secondary Optical Input Level Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bmajorHighSecOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.15
The value of this object provides the Major High alarm value of the Secondary Optical Input Level Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bmajorLowSecOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.16
The value of this object provides the Major Low alarm value of the Secondary Optical Input Level Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bminorHighSecOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.17
The value of this object provides the Minor High alarm value of the Secondary Optical Input Level Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bminorLowSecOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.18
The value of this object provides the Minor Low alarm value of the Secondary Optical Input Level Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bcurrentValueSecOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.19
The value of this object provides the Current value of the Secondary Optical Input Level Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bstateFlagSecOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.20
The value of this object provides the state of the Secondary Optical Input Level Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10bminValueSecOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.21
The value of this object provides the minimum value the Secondary Optical Input Level Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bmaxValueSecOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.22
The value of this object provides the maximum value the Secondary Optical Input Level Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10balarmStateSecOpticalInputLevel 1.3.6.1.4.1.1166.6.1.2.15.2.1.23
The value of this object provides the curent alarm state of the Secondary Optical Input Level Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

osw10blabelPriOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.24
The value of this object provides the label of the Primary Optical Input Threshold Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10buomPriOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.25
The value of this object provides the Unit of Measure of the Primary Optical Input Threshold Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bmajorHighPriOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.26
The value of this object provides the Major High alarm value of the Primary Optical Input Threshold Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bmajorLowPriOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.27
The value of this object provides the Major Low alarm value of the Primary Optical Input Threshold Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bminorHighPriOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.28
The value of this object provides the Minor High alarm value of the Primary Optical Input Threshold Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bminorLowPriOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.29
The value of this object provides the Minor Low alarm value of the Primary Optical Input Threshold Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bcurrentValuePriOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.30
The value of this object provides the Current value of the Primary Optical Input Threshold Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Float  

osw10bstateFlagPriOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.31
The value of this object provides the state of the Primary Optical Input Threshold Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10bminValuePriOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.32
The value of this object provides the minimum value the Primary Optical Input Threshold Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Float  

osw10bmaxValuePriOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.33
The value of this object provides the maximum value the Primary Optical Input Threshold Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10balarmStatePriOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.34
The value of this object provides the curent alarm state of the Primary Optical Threshold Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

osw10blabelSecOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.35
The value of this object provides the label of the Secondary Optical Input Threshold Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10buomSecOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.36
The value of this object provides the Unit of Measure of the Secondary Optical Input Threshold Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bmajorHighSecOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.37
The value of this object provides the Major High alarm value of the Secondary Optical Input Threshold Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bmajorLowSecOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.38
The value of this object provides the Major Low alarm value of the Secondary Optical Input Threshold Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bminorHighSecOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.39
The value of this object provides the Minor High alarm value of the Secondary Optical Input Threshold Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bminorLowSecOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.40
The value of this object provides the Minor Low alarm value of the Secondary Optical Input Threshold Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bcurrentValueSecOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.41
The value of this object provides the Current value of the Secondary Optical Input Threshold Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Float  

osw10bstateFlagSecOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.42
The value of this object provides the state of the Secondary Optical Input Threshold Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10bminValueSecOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.43
The value of this object provides the minimum value the Secondary Optical Input Threshold Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bmaxValueSecOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.44
The value of this object provides the maximum value the Secondary Optical Input Threshold Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10balarmStateSecOpticalThreshold 1.3.6.1.4.1.1166.6.1.2.15.2.1.45
The value of this object provides the curent alarm state of the Secondary Optical Threshold Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

osw10blabelModTemp 1.3.6.1.4.1.1166.6.1.2.15.2.1.46
The value of this object provides the label of the Module Temperature Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10buomModTemp 1.3.6.1.4.1.1166.6.1.2.15.2.1.47
The value of this object provides the Unit of Measure of the Module Temperature Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bmajorHighModTemp 1.3.6.1.4.1.1166.6.1.2.15.2.1.48
The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bmajorLowModTemp 1.3.6.1.4.1.1166.6.1.2.15.2.1.49
The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bminorHighModTemp 1.3.6.1.4.1.1166.6.1.2.15.2.1.50
The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bminorLowModTemp 1.3.6.1.4.1.1166.6.1.2.15.2.1.51
The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bcurrentValueModTemp 1.3.6.1.4.1.1166.6.1.2.15.2.1.52
The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bstateFlagModTemp 1.3.6.1.4.1.1166.6.1.2.15.2.1.53
The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10bminValueModTemp 1.3.6.1.4.1.1166.6.1.2.15.2.1.54
The value of this object provides the minimum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bmaxValueModTemp 1.3.6.1.4.1.1166.6.1.2.15.2.1.55
The value of this object provides the maximum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10balarmStateModTemp 1.3.6.1.4.1.1166.6.1.2.15.2.1.56
The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

osw10blabelFanCurrent 1.3.6.1.4.1.1166.6.1.2.15.2.1.57
The value of this object provides the label of the Fan Current Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10buomFanCurrent 1.3.6.1.4.1.1166.6.1.2.15.2.1.58
The value of this object provides the Unit of Measure of the Fan Current Analog parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bmajorHighFanCurrent 1.3.6.1.4.1.1166.6.1.2.15.2.1.59
The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bmajorLowFanCurrent 1.3.6.1.4.1.1166.6.1.2.15.2.1.60
The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bminorHighFanCurrent 1.3.6.1.4.1.1166.6.1.2.15.2.1.61
The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bminorLowFanCurrent 1.3.6.1.4.1.1166.6.1.2.15.2.1.62
The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bcurrentValueFanCurrent 1.3.6.1.4.1.1166.6.1.2.15.2.1.63
The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bstateFlagFanCurrent 1.3.6.1.4.1.1166.6.1.2.15.2.1.64
The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10bminValueFanCurrent 1.3.6.1.4.1.1166.6.1.2.15.2.1.65
The value of this object provides the minimum value the Fan Current Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10bmaxValueFanCurrent 1.3.6.1.4.1.1166.6.1.2.15.2.1.66
The value of this object provides the maximum value the Fan Current Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Float  

osw10balarmStateFanCurrent 1.3.6.1.4.1.1166.6.1.2.15.2.1.67
The value of this object provides the current alarm state of the Fan Current Analog parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)  

gx2Osw10bDigitalTableIndex 1.3.6.1.4.1.1166.6.1.2.15.3.2.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4294967295  

osw10blabelSwitchControl 1.3.6.1.4.1.1166.6.1.2.15.3.2.2
The value of this object provides the label of the Switch Control Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10benumSwitchControl 1.3.6.1.4.1.1166.6.1.2.15.3.2.3
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueSwitchControl 1.3.6.1.4.1.1166.6.1.2.15.3.2.4
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER through(1), crossover(2)  

osw10bstateflagSwitchControl 1.3.6.1.4.1.1166.6.1.2.15.3.2.5
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelSwitchMode 1.3.6.1.4.1.1166.6.1.2.15.3.2.6
The value of this object provides the label of the Switch Control Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10benumSwitchMode 1.3.6.1.4.1.1166.6.1.2.15.3.2.7
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueSwitchMode 1.3.6.1.4.1.1166.6.1.2.15.3.2.8
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), manual(2)  

osw10bstateflagSwitchMode 1.3.6.1.4.1.1166.6.1.2.15.3.2.9
The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelRevertMode 1.3.6.1.4.1.1166.6.1.2.15.3.2.10
The value of this object provides the label of the Revert Mode Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10benumRevertMode 1.3.6.1.4.1.1166.6.1.2.15.3.2.11
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueRevertMode 1.3.6.1.4.1.1166.6.1.2.15.3.2.12
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

osw10bstateflagRevertMode 1.3.6.1.4.1.1166.6.1.2.15.3.2.13
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelRevertTime 1.3.6.1.4.1.1166.6.1.2.15.3.2.14
The value of this object provides the label of the Revert Time Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10benumRevertTime 1.3.6.1.4.1.1166.6.1.2.15.3.2.15
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueRevertTime 1.3.6.1.4.1.1166.6.1.2.15.3.2.16
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tensec(1), sixtysec(2), sixhundredsec(3)  

osw10bstateflagRevertTime 1.3.6.1.4.1.1166.6.1.2.15.3.2.17
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelWavelength 1.3.6.1.4.1.1166.6.1.2.15.3.2.18
The value of this object provides the label of the Wavelength Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10benumWavelength 1.3.6.1.4.1.1166.6.1.2.15.3.2.19
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueWavelength 1.3.6.1.4.1.1166.6.1.2.15.3.2.20
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER thirteentennm(1), fifteenfiftynnm(2)  

osw10bstateflagWavelength 1.3.6.1.4.1.1166.6.1.2.15.3.2.21
The value of this object provides the state of the the parameter. (0-Hiden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelSwitchMonitor 1.3.6.1.4.1.1166.6.1.2.15.3.2.22
The value of this object provides the label of the Switch State Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10benumSwitchMonitor 1.3.6.1.4.1.1166.6.1.2.15.3.2.23
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueSwitchMonitor 1.3.6.1.4.1.1166.6.1.2.15.3.2.24
The value of this object is the current value of the parameter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER through(1), crossover(2)  

osw10bstateflagSwitchMonitor 1.3.6.1.4.1.1166.6.1.2.15.3.2.25
The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelOperationMode 1.3.6.1.4.1.1166.6.1.2.15.3.2.26
The value of this object provides the label of the Switch State Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10benumOperationMode 1.3.6.1.4.1.1166.6.1.2.15.3.2.27
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueOperationMode 1.3.6.1.4.1.1166.6.1.2.15.3.2.28
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mode2x1(1), mode1x2(2), mode2x2(3)  

osw10bstateflagOperationMode 1.3.6.1.4.1.1166.6.1.2.15.3.2.29
The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelFactoryDefault 1.3.6.1.4.1.1166.6.1.2.15.3.2.30
The value of this object provides the label of the Factory Default Reset Digital parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10benumFactoryDefault 1.3.6.1.4.1.1166.6.1.2.15.3.2.31
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueFactoryDefault 1.3.6.1.4.1.1166.6.1.2.15.3.2.32
The value of this object is the current value of the parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

osw10bstateflagFactoryDefault 1.3.6.1.4.1.1166.6.1.2.15.3.2.33
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

gx2Osw10bStatusTableIndex 1.3.6.1.4.1.1166.6.1.2.15.4.3.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4294967295  

osw10blabelBoot 1.3.6.1.4.1.1166.6.1.2.15.4.3.2
The value of this object provides the label of the Boot Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueBoot 1.3.6.1.4.1.1166.6.1.2.15.4.3.3
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

osw10bstateflagBoot 1.3.6.1.4.1.1166.6.1.2.15.4.3.4
The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelFlash 1.3.6.1.4.1.1166.6.1.2.15.4.3.5
The value of this object provides the label of the Flash Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueFlash 1.3.6.1.4.1.1166.6.1.2.15.4.3.6
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

osw10bstateflagFlash 1.3.6.1.4.1.1166.6.1.2.15.4.3.7
The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelFactoryDataCRC 1.3.6.1.4.1.1166.6.1.2.15.4.3.8
The value of this object provides the label of the Factory Data CRC Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueFactoryDataCRC 1.3.6.1.4.1.1166.6.1.2.15.4.3.9
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

osw10bstateflagFactoryDataCRC 1.3.6.1.4.1.1166.6.1.2.15.4.3.10
The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelCalibrateTableStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.11
The value of this object provides the label of optical input calibration table status description
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueCalibrateTableStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.12
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

osw10bstateflagCalibrateTableStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.13
The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelAlarmDataCrc 1.3.6.1.4.1.1166.6.1.2.15.4.3.14
The value of this object provides the label of the Alarm Data Crc parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueAlarmDataCrc 1.3.6.1.4.1.1166.6.1.2.15.4.3.15
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

osw10bstateflagAlarmDataCrc 1.3.6.1.4.1.1166.6.1.2.15.4.3.16
The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelInputStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.17
The value of this object provides the label of the Input Status parameter.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueInputStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.18
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

osw10bstateflagInputStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.19
The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelPriActiveStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.20
The value of this object provides the label of the Primary Active Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvaluePriActiveStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.21
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

osw10bstateflagPriActiveStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.22
The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelHardwareErr 1.3.6.1.4.1.1166.6.1.2.15.4.3.23
The value of this object provides the label of the Primary Active Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueHardwareErr 1.3.6.1.4.1.1166.6.1.2.15.4.3.24
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

osw10bstateflagHardwareErr 1.3.6.1.4.1.1166.6.1.2.15.4.3.25
The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelPriThresholdStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.26
The value of this object provides the label of the Primary Input Below The Threshold Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvaluePriThresholdStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.27
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

osw10bstateflagPriThresholdStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.28
The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

osw10blabelSecThresholdStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.29
The value of this object provides the label of the Primary Input Below The Threshold Status parameter.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bvalueSecThresholdStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.30
The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)  

osw10bstateflagSecThresholdStatus 1.3.6.1.4.1.1166.6.1.2.15.4.3.31
The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hidden(1), read-only(2), updateable(3)  

gx2Osw10bFactoryTableIndex 1.3.6.1.4.1.1166.6.1.2.15.5.4.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4294967295  

osw10bbootControlByte 1.3.6.1.4.1.1166.6.1.2.15.5.4.2
The value of this object indicates which bank the firmware is currently being boot from.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

osw10bbootStatusByte 1.3.6.1.4.1.1166.6.1.2.15.5.4.3
This object indicates the status of the last boot
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

osw10bbank1CRC 1.3.6.1.4.1.1166.6.1.2.15.5.4.4
This object provides the CRC code of bank 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

osw10bbank2CRC 1.3.6.1.4.1.1166.6.1.2.15.5.4.5
This object provides the CRC code of bank 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

osw10bprgEEPROMByte 1.3.6.1.4.1.1166.6.1.2.15.5.4.6
This object indicates if the EEPROM has been programmed
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

osw10bfactoryCRC 1.3.6.1.4.1.1166.6.1.2.15.5.4.7
This object provides the CRC code for the Factory data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

osw10bcalculateCRC 1.3.6.1.4.1.1166.6.1.2.15.5.4.8
This object indicates which of the Enums will have the CRC calculated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER factory(1), calTable(2), alarm(3), na(4)  

osw10bhourMeter 1.3.6.1.4.1.1166.6.1.2.15.5.4.9
This object provides the hour meter reading of the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

osw10bflashPrgCntA 1.3.6.1.4.1.1166.6.1.2.15.5.4.10
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

osw10bflashPrgCntB 1.3.6.1.4.1.1166.6.1.2.15.5.4.11
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

osw10bflashBankARev 1.3.6.1.4.1.1166.6.1.2.15.5.4.12
This object provides the revision of flash bank 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

osw10bflashBankBRev 1.3.6.1.4.1.1166.6.1.2.15.5.4.13
This object provides the revision of flash bank 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

rxgx2Osw10bHoldTimeTableIndex 1.3.6.1.4.1.1166.6.1.2.15.6.5.1
The value of this object is the index of the data object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4294967295  

rxgx2Osw10bHoldTimeSpecIndex 1.3.6.1.4.1.1166.6.1.2.15.6.5.2
The value of this object identifies the index of the alarm object to be modified.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4294967295  

rxgx2Osw10bHoldTimeData 1.3.6.1.4.1.1166.6.1.2.15.6.5.3
The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered into bytes zero and one of the object. Bytes three and four are used to entering the hold time for the specified alarm object. The Hold timer data ranges from 0 to 1300 seconds. The index of this object corresponds to the alarm object to be modified. Alarm Hold timers correspond to the index of this object as follows: Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx, The hold time is represented in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

trapOSW10BConfigChangeInteger 1
This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE    

trapOSW10BConfigChangeDisplayString 2
This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE    

trapOSW10BOpticalInputAlarm 3
This trap is issued when the Switch Control signals go out of range. trapAdditionalInfoInteger variable contains current reading of this parameter.
TRAP-TYPE    

trapOSW10BFanCurrentAlarm 4
This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapOSW10BModuleTempAlarm 5
This trap is issued when the Temperature goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE    

trapOSW10BFlashAlarm 6
This trap is issued when the detects an error during Flash memory operations.
TRAP-TYPE    

trapOSW10BBankBootAlarm 7
This trap is issued when the detects an error while booting from bank 0 or bank 1.
TRAP-TYPE    

trapOSW10BCaliDataCRCAlarm 8
This trap is issued when the optical calibration table corrupted.
TRAP-TYPE    

trapOSW10BFactoryDataCRCAlarm 9
This trap is issued when the Factory Data CRC is incorrect.
TRAP-TYPE    

trapOSW10BAlarmDataCRCAlarm 10
This trap is issued when the Alarm Data CRC is incorrect.
TRAP-TYPE    

trapOSW10BInputSwitchedAlarm 11
This trap is issued when the Optical input switched. This is info only alarm, unit nothing wrong
TRAP-TYPE    

trapOSW10BResetFactoryDefaultAlarm 12
This trap is issued when the Factory Default Reset occurs. This is info only
TRAP-TYPE    

trapOSW10BSecondaryInputActiveAlarm 13
This trap is issued when the secondary input becomes active.
TRAP-TYPE    

trapOSW10BPriOpticInputAlarm 14
This trap is issued when primary optical input out of range.
TRAP-TYPE    

trapOSW10BSecOpticInputAlarm 15
This trap is issued when Sec optical input out of range.
TRAP-TYPE    

trapOSW10BHardwareErrorAlarm 16
This trap is issued when hardware error happens.
TRAP-TYPE