OMNI-gx2RSW1000B-MIB

File: OMNI-gx2RSW1000B-MIB.mib (84224 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
RFC-1215	GX2HFC-MIB	NLSBBN-TRAPS-MIB

Imported symbols

IpAddress	TimeTicks	Counter
OBJECT-TYPE	DisplayString	TRAP-TYPE
gx2Rsw1000b	trapIdentifier	trapNetworkElemModelNumber
trapNetworkElemSerialNum	trapPerceivedSeverity	trapNetworkElemOperState
trapNetworkElemAlarmStatus	trapNetworkElemAdminState	trapNetworkElemAvailStatus
trapText	trapNETrapLastTrapTimeStamp	trapChangedObjectId
trapChangedValueInteger	trapChangedValueDisplayString

Defined Types

Float
Counter

Gx2Rsw1000bAnalogEntry
SEQUENCE
	gx2Rsw1000bAnalogTableIndex	INTEGER
	rsw1000blabelPriRFInputLvl	DisplayString	Size(0..80)
	rsw1000buomPriRFInputLvl	DisplayString	Size(0..80)
	rsw1000bmajorHighPriRFInputLvl	Float
	rsw1000bmajorLowPriRFInputLvl	Float
	rsw1000bminorHighPriRFInputLvl	Float
	rsw1000bminorLowPriRFInputLvl	Float
	rsw1000bcurrentValuePriRFInputLvl	Float
	rsw1000bstateFlagPriRFInputLvl	INTEGER
	rsw1000bminValuePriRFInputLvl	Float
	rsw1000bmaxValuePriRFInputLvl	Float
	rsw1000balarmStatePriRFInputLvl	INTEGER
	rsw1000blabelSecRFInputLvl	DisplayString	Size(0..80)
	rsw1000buomSecRFInputLvl	DisplayString	Size(0..80)
	rsw1000bmajorHighSecRFInputLvl	Float
	rsw1000bmajorLowSecRFInputLvl	Float
	rsw1000bminorHighSecRFInputLvl	Float
	rsw1000bminorLowSecRFInputLvl	Float
	rsw1000bcurrentValueSecRFInputLvl	Float
	rsw1000bstateFlagSecRFInputLvl	INTEGER
	rsw1000bminValueSecRFInputLvl	Float
	rsw1000bmaxValueSecRFInputLvl	Float
	rsw1000balarmStateSecRFInputLvl	INTEGER
	rsw1000blabelPriRFThreshold	DisplayString	Size(0..80)
	rsw1000buomPriRFThreshold	DisplayString	Size(0..80)
	rsw1000bmajorHighPriRFThreshold	Float
	rsw1000bmajorLowPriRFThreshold	Float
	rsw1000bminorHighPriRFThreshold	Float
	rsw1000bminorLowPriRFThreshold	Float
	rsw1000bcurrentValuePriRFThreshold	Float
	rsw1000bstateFlagPriRFThreshold	INTEGER
	rsw1000bminValuePriRFThreshold	Float
	rsw1000bmaxValuePriRFThreshold	Float
	rsw1000balarmStatePriRFThreshold	INTEGER
	rsw1000blabelSecRFThreshold	DisplayString	Size(0..80)
	rsw1000buomSecRFThreshold	DisplayString	Size(0..80)
	rsw1000bmajorHighSecRFThreshold	Float
	rsw1000bmajorLowSecRFThreshold	Float
	rsw1000bminorHighSecRFThreshold	Float
	rsw1000bminorLowSecRFThreshold	Float
	rsw1000bcurrentValueSecRFThreshold	Float
	rsw1000bstateFlagSecRFThreshold	INTEGER
	rsw1000bminValueSecRFThreshold	Float
	rsw1000bmaxValueSecRFThreshold	Float
	rsw1000balarmStateSecRFThreshold	INTEGER
	rsw1000blabelModTemp	DisplayString	Size(0..80)
	rsw1000buomModTemp	DisplayString	Size(0..80)
	rsw1000bmajorHighModTemp	Float
	rsw1000bmajorLowModTemp	Float
	rsw1000bminorHighModTemp	Float
	rsw1000bminorLowModTemp	Float
	rsw1000bcurrentValueModTemp	Float
	rsw1000bstateFlagModTemp	INTEGER
	rsw1000bminValueModTemp	Float
	rsw1000bmaxValueModTemp	Float
	rsw1000balarmStateModTemp	INTEGER
	rsw1000blabelFanCurrent	DisplayString	Size(0..80)
	rsw1000buomFanCurrent	DisplayString	Size(0..80)
	rsw1000bmajorHighFanCurrent	Float
	rsw1000bmajorLowFanCurrent	Float
	rsw1000bminorHighFanCurrent	Float
	rsw1000bminorLowFanCurrent	Float
	rsw1000bcurrentValueFanCurrent	Float
	rsw1000bstateFlagFanCurrent	INTEGER
	rsw1000bminValueFanCurrent	Float
	rsw1000bmaxValueFanCurrent	Float
	rsw1000balarmStateFanCurrent	INTEGER

Gx2Rsw1000bDigitalEntry
SEQUENCE
	gx2Rsw1000bDigitalTableIndex	INTEGER
	rsw1000blabelSwitchControl	DisplayString	Size(0..80)
	rsw1000benumSwitchControl	DisplayString	Size(0..80)
	rsw1000bvalueSwitchControl	INTEGER
	rsw1000bstateflagSwitchControl	INTEGER
	rsw1000blabelSwitchMode	DisplayString	Size(0..80)
	rsw1000benumSwitchMode	DisplayString	Size(0..80)
	rsw1000bvalueSwitchMode	INTEGER
	rsw1000bstateflagSwitchMode	INTEGER
	rsw1000blabelRevertEnable	DisplayString	Size(0..80)
	rsw1000benumRevertEnable	DisplayString	Size(0..80)
	rsw1000bvalueRevertEnable	INTEGER
	rsw1000bstateflagRevertEnable	INTEGER
	rsw1000blabelRevertTime	DisplayString	Size(0..80)
	rsw1000benumRevertTime	DisplayString	Size(0..80)
	rsw1000bvalueRevertTime	INTEGER
	rsw1000bstateflagRevertTime	INTEGER
	rsw1000blabelSensorMode	DisplayString	Size(0..80)
	rsw1000benumSensorMode	DisplayString	Size(0..80)
	rsw1000bvalueSensorMode	INTEGER
	rsw1000bstateflagSensorMode	INTEGER
	rsw1000blabelSwitchMonitor	DisplayString	Size(0..80)
	rsw1000benumSwitchMonitor	DisplayString	Size(0..80)
	rsw1000bvalueSwitchMonitor	INTEGER
	rsw1000bstateflagSwitchMonitor	INTEGER
	rsw1000blabelPriStatusSig	DisplayString	Size(0..80)
	rsw1000benumPriStatusSig	DisplayString	Size(0..80)
	rsw1000bvaluePriStatusSig	INTEGER
	rsw1000bstateflagPriStatusSig	INTEGER
	rsw1000blabelSecStatusSig	DisplayString	Size(0..80)
	rsw1000benumSecStatusSig	DisplayString	Size(0..80)
	rsw1000bvalueSecStatusSig	INTEGER
	rsw1000bstateflagSecStatusSig	INTEGER
	rsw1000blabelFactoryDefault	DisplayString	Size(0..80)
	rsw1000benumFactoryDefault	DisplayString	Size(0..80)
	rsw1000bvalueFactoryDefault	INTEGER
	rsw1000bstateflagFactoryDefault	INTEGER

Gx2Rsw1000bStatusEntry
SEQUENCE
	gx2Rsw1000bStatusTableIndex	INTEGER
	rsw1000blabelBoot	DisplayString	Size(0..80)
	rsw1000bvalueBoot	INTEGER
	rsw1000bstateflagBoot	INTEGER
	rsw1000blabelFlash	DisplayString	Size(0..80)
	rsw1000bvalueFlash	INTEGER
	rsw1000bstateflagFlash	INTEGER
	rsw1000blabelFactoryDataCRC	DisplayString	Size(0..80)
	rsw1000bvalueFactoryDataCRC	INTEGER
	rsw1000bstateflagFactoryDataCRC	INTEGER
	rsw1000blabelRFDataCRC	DisplayString	Size(0..80)
	rsw1000bvalueRFDataCRC	INTEGER
	rsw1000bstateflagRFDataCRC	INTEGER
	rsw1000blabelAlarmDataCRC	DisplayString	Size(0..80)
	rsw1000bvalueAlarmDataCRC	INTEGER
	rsw1000bstateflagAlarmDataCRC	INTEGER
	rsw1000blabelRFSignalStatus	DisplayString	Size(0..80)
	rsw1000bvalueRFSignalStatus	INTEGER
	rsw1000bstateflagRFSignalStatus	INTEGER
	rsw1000blabelPriActiveStatus	DisplayString	Size(0..80)
	rsw1000bvaluePriActiveStatus	INTEGER
	rsw1000bstateflagPriActiveStatus	INTEGER

Gx2Rsw1000bFactoryEntry
SEQUENCE
	gx2Rsw1000bFactoryTableIndex	INTEGER
	rsw1000bbootControlByte	INTEGER
	rsw1000bbootStatusByte	INTEGER
	rsw1000bbank0CRC	INTEGER
	rsw1000bbank1CRC	INTEGER
	rsw1000bprgEEPROMByte	INTEGER
	rsw1000bfactoryCRC	INTEGER
	rsw1000bcalculateCRC	INTEGER
	rsw1000bhourMeter	INTEGER
	rsw1000bflashPrgCnt0	INTEGER
	rsw1000bflashPrgCnt1	INTEGER
	rsw1000bflashBank0Rev	DisplayString	Size(0..80)
	rsw1000bflashBank1Rev	DisplayString	Size(0..80)
	rsw1000bSubagentRev	DisplayString	Size(0..80)

Gx2Rsw1000bHoldTimeEntry
SEQUENCE
	rxgx2Rsw1000bHoldTimeTableIndex	INTEGER
	rxgx2Rsw1000bHoldTimeSpecIndex	INTEGER
	rxgx2Rsw1000bHoldTimeData	INTEGER

Defined Values

gx2Rsw1000bDescriptor		1.3.6.1.4.1.1166.6.1.2.18.1
OBJECT IDENTIFIER

gx2Rsw1000bAnalogTable		1.3.6.1.4.1.1166.6.1.2.18.2
This table contains gx2Rsw1000b specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Rsw1000bAnalogEntry

gx2Rsw1000bAnalogEntry		1.3.6.1.4.1.1166.6.1.2.18.2.1
This list contains the analog parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Rsw1000bAnalogEntry

gx2Rsw1000bDigitalTable		1.3.6.1.4.1.1166.6.1.2.18.3
This table contains gx2Rsw1000b specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Rsw1000bDigitalEntry

gx2Rsw1000bDigitalEntry		1.3.6.1.4.1.1166.6.1.2.18.3.2
This list contains digital parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Rsw1000bDigitalEntry

gx2Rsw1000bStatusTable		1.3.6.1.4.1.1166.6.1.2.18.4
This table contains gx2Rsw1000b specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Rsw1000bStatusEntry

gx2Rsw1000bStatusEntry		1.3.6.1.4.1.1166.6.1.2.18.4.3
This list contains Status parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Rsw1000bStatusEntry

gx2Rsw1000bFactoryTable		1.3.6.1.4.1.1166.6.1.2.18.5
This table contains gx2Rsw1000b specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Rsw1000bFactoryEntry

gx2Rsw1000bFactoryEntry		1.3.6.1.4.1.1166.6.1.2.18.5.4
This list contains Factory parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Rsw1000bFactoryEntry

gx2Rsw1000bHoldTimeTable		1.3.6.1.4.1.1166.6.1.2.18.6
This table contains gx2Rsw1000b specific parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2Rsw1000bHoldTimeEntry

gx2Rsw1000bHoldTimeEntry		1.3.6.1.4.1.1166.6.1.2.18.6.5
This list contains digital product class and the associated RF channel parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2Rsw1000bHoldTimeEntry

gx2Rsw1000bAnalogTableIndex		1.3.6.1.4.1.1166.6.1.2.18.2.1.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

rsw1000blabelPriRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.2
The value of this object provides the label of the Primary RF Input Level Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000buomPriRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.3
The value of this object provides the Unit of Measure of the Primary RF Input Level Analog parameter. For all analog objects for this parameter type, the Unit of Measure is dBmV.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bmajorHighPriRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.4
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Major High alarm value of the Primary RF Input Level Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bmajorLowPriRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.5
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Major Low alarm value of the Primary RF Input Level Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bminorHighPriRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.6
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Minor High alarm value of the Primary RF Input Level Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bminorLowPriRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.7
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Minor Low alarm value of the Primary RF Input Level Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bcurrentValuePriRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.8
The value of this object provides the current value of the Primary RF Input Level Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bstateFlagPriRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.9
The value of this object provides the state of the Primary RF Input Level Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000bminValuePriRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.10
The value of this object represents a gauge minimum limit for the Primary RF Input Level Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bmaxValuePriRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.11
The value of this object represents a gauge maximum limit for the Primary RF Input Level Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000balarmStatePriRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.12
The value of this object provides the curent alarm state of the Primary RF Input Level Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

rsw1000blabelSecRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.13
The value of this object provides the label of the Secondary RF Input Level Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000buomSecRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.14
The value of this object provides the Unit of Measure of the Secondary RF Input Level Analog parameter. For all analog objects for this parameter type, the Unit of Measure is dBmV.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bmajorHighSecRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.15
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Major High alarm value of the Secondary RF Input Level Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bmajorLowSecRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.16
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Major Low alarm value of the Secondary RF Input Level Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bminorHighSecRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.17
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Minor High alarm value of the Secondary RF Input Level Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bminorLowSecRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.18
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Minor Low alarm value of the Secondary RF Input Level Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bcurrentValueSecRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.19
The value of this object provides the current value of the Secondary RF Input Level Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bstateFlagSecRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.20
The value of this object provides the state of the Secondary RF Input Level Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000bminValueSecRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.21
The value of this object represents a gauge minimum limit for the Secondary RF Input Level Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bmaxValueSecRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.22
The value of this object represents a gauge maximum limit for the Secondary RF Input Level Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000balarmStateSecRFInputLvl		1.3.6.1.4.1.1166.6.1.2.18.2.1.23
The value of this object provides the curent alarm state of the Secondary RF Input Level Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

rsw1000blabelPriRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.24
The value of this object provides the label of the Primary RF Threshold Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000buomPriRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.25
The value of this object provides the Unit of Measure of the Primary RF Threshold Analog parameter. For all analog objects for this parameter type, the Unit of Measure is dBmV.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bmajorHighPriRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.26
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Major High alarm value of the Primary RF Threshold Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bmajorLowPriRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.27
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Major Low alarm value of the Primary RF Threshold Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bminorHighPriRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.28
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Minor High alarm value of the Primary RF Threshold Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bminorLowPriRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.29
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Minor Low alarm value of the Primary RF Threshold Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bcurrentValuePriRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.30
The value of this object provides the current value of the Primary RF Threshold Analog parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Float

rsw1000bstateFlagPriRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.31
The value of this object provides the state of the Primary RF Threshold Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000bminValuePriRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.32
The value of this object represents a gauge minimum limit for the Primary RF Threshold Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bmaxValuePriRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.33
The value of this object represents a gauge maximum limit for the Primary RF Threshold Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000balarmStatePriRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.34
The value of this object provides the curent alarm state of the Primary RF Threshold Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

rsw1000blabelSecRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.35
The value of this object provides the label of the Secondary RF Threshold Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000buomSecRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.36
The value of this object provides the Unit of Measure of the Secondary RF Threshold Analog parameter. For all analog objects for this parameter type, the Unit of Measure is dBmV.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bmajorHighSecRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.37
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Major High alarm value of the Secondary RF Threshold Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bmajorLowSecRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.38
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Major Low alarm value of the Secondary RF Threshold Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bminorHighSecRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.39
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Minor High alarm value of the Secondary RF Threshold Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bminorLowSecRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.40
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Minor Low alarm value of the Secondary RF Threshold Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bcurrentValueSecRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.41
The value of this object provides the current value of the Secondary RF Threshold Analog parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Float

rsw1000bstateFlagSecRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.42
The value of this object provides the state of the Secondary RF Threshold Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000bminValueSecRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.43
The value of this object represents a gauge minimum limit for the Secondary RF Threshold Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bmaxValueSecRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.44
The value of this object represents a gauge maximum limit for the Secondary RF Threshold Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000balarmStateSecRFThreshold		1.3.6.1.4.1.1166.6.1.2.18.2.1.45
The value of this object provides the curent alarm state of the Secondary RF Threshold Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

rsw1000blabelModTemp		1.3.6.1.4.1.1166.6.1.2.18.2.1.46
The value of this object provides the label of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000buomModTemp		1.3.6.1.4.1.1166.6.1.2.18.2.1.47
The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. For all analog objects for this parameter type, the Unit of Measure is degrees Celsius.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bmajorHighModTemp		1.3.6.1.4.1.1166.6.1.2.18.2.1.48
The value of this object provides the Major High alarm value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bmajorLowModTemp		1.3.6.1.4.1.1166.6.1.2.18.2.1.49
The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bminorHighModTemp		1.3.6.1.4.1.1166.6.1.2.18.2.1.50
The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bminorLowModTemp		1.3.6.1.4.1.1166.6.1.2.18.2.1.51
The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bcurrentValueModTemp		1.3.6.1.4.1.1166.6.1.2.18.2.1.52
The value of this object provides the Current value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bstateFlagModTemp		1.3.6.1.4.1.1166.6.1.2.18.2.1.53
The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000bminValueModTemp		1.3.6.1.4.1.1166.6.1.2.18.2.1.54
The value of this object represents a gauge minimum limit for the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bmaxValueModTemp		1.3.6.1.4.1.1166.6.1.2.18.2.1.55
The value of this object represents a gauge maximum limit for the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000balarmStateModTemp		1.3.6.1.4.1.1166.6.1.2.18.2.1.56
The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

rsw1000blabelFanCurrent		1.3.6.1.4.1.1166.6.1.2.18.2.1.57
The value of this object provides the label of the Fan Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000buomFanCurrent		1.3.6.1.4.1.1166.6.1.2.18.2.1.58
The value of this object provides the Unit of Measure of the Fan Current Analog parameter. For all analog objects for this parameter type, the Unit of Measure is mA
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bmajorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.18.2.1.59
The value of this object provides the Major High alarm value of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bmajorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.18.2.1.60
The value of this object provides the Major Low alarm value of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bminorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.18.2.1.61
This object is not used by this module and always returns invalid floating point value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Minor High alarm value of the Fan Current Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bminorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.18.2.1.62
This object is not used by this module and always returns invalid floating point value of 0xFFFFFFFF. This object is kept here for persistence. The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

rsw1000bcurrentValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.18.2.1.63
The value of this object provides the Current value of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bstateFlagFanCurrent		1.3.6.1.4.1.1166.6.1.2.18.2.1.64
The value of this object provides the state of the Fan Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000bminValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.18.2.1.65
The value of this object represents a gauge minimum limit for the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000bmaxValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.18.2.1.66
The value of this object represents a gauge maximum limit for the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

rsw1000balarmStateFanCurrent		1.3.6.1.4.1.1166.6.1.2.18.2.1.67
The value of this object provides the curent alarm state of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gx2Rsw1000bDigitalTableIndex		1.3.6.1.4.1.1166.6.1.2.18.3.2.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

rsw1000blabelSwitchControl		1.3.6.1.4.1.1166.6.1.2.18.3.2.2
The value of this object provides the label of the Switch Control Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000benumSwitchControl		1.3.6.1.4.1.1166.6.1.2.18.3.2.3
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueSwitchControl		1.3.6.1.4.1.1166.6.1.2.18.3.2.4
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	primary(1), secondary(2)

rsw1000bstateflagSwitchControl		1.3.6.1.4.1.1166.6.1.2.18.3.2.5
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelSwitchMode		1.3.6.1.4.1.1166.6.1.2.18.3.2.6
The value of this object provides the label of the Revert Mode Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000benumSwitchMode		1.3.6.1.4.1.1166.6.1.2.18.3.2.7
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueSwitchMode		1.3.6.1.4.1.1166.6.1.2.18.3.2.8
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	automatic(1), manual(2)

rsw1000bstateflagSwitchMode		1.3.6.1.4.1.1166.6.1.2.18.3.2.9
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelRevertEnable		1.3.6.1.4.1.1166.6.1.2.18.3.2.10
The value of this object provides the label of the Revert Enable Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000benumRevertEnable		1.3.6.1.4.1.1166.6.1.2.18.3.2.11
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueRevertEnable		1.3.6.1.4.1.1166.6.1.2.18.3.2.12
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

rsw1000bstateflagRevertEnable		1.3.6.1.4.1.1166.6.1.2.18.3.2.13
The value of this object provides the state of the the parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelRevertTime		1.3.6.1.4.1.1166.6.1.2.18.3.2.14
The value of this object provides the label of the Revert Time Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000benumRevertTime		1.3.6.1.4.1.1166.6.1.2.18.3.2.15
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueRevertTime		1.3.6.1.4.1.1166.6.1.2.18.3.2.16
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	tensec(1), sixtysec(2), sixhundredsec(3)

rsw1000bstateflagRevertTime		1.3.6.1.4.1.1166.6.1.2.18.3.2.17
The value of this object provides the state of the the parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelSensorMode		1.3.6.1.4.1.1166.6.1.2.18.3.2.18
The value of this object provides the label of the SensorMode Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000benumSensorMode		1.3.6.1.4.1.1166.6.1.2.18.3.2.19
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueSensorMode		1.3.6.1.4.1.1166.6.1.2.18.3.2.20
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	internal(1), external(2)

rsw1000bstateflagSensorMode		1.3.6.1.4.1.1166.6.1.2.18.3.2.21
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelSwitchMonitor		1.3.6.1.4.1.1166.6.1.2.18.3.2.22
The value of this object provides the label of the Switch Monitor Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000benumSwitchMonitor		1.3.6.1.4.1.1166.6.1.2.18.3.2.23
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueSwitchMonitor		1.3.6.1.4.1.1166.6.1.2.18.3.2.24
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	primary(1), secondary(2)

rsw1000bstateflagSwitchMonitor		1.3.6.1.4.1.1166.6.1.2.18.3.2.25
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelPriStatusSig		1.3.6.1.4.1.1166.6.1.2.18.3.2.26
The value of this object provides the label of the Primary Control Signal Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000benumPriStatusSig		1.3.6.1.4.1.1166.6.1.2.18.3.2.27
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvaluePriStatusSig		1.3.6.1.4.1.1166.6.1.2.18.3.2.28
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	short(1), valid(2), invalid(3), open(4)

rsw1000bstateflagPriStatusSig		1.3.6.1.4.1.1166.6.1.2.18.3.2.29
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelSecStatusSig		1.3.6.1.4.1.1166.6.1.2.18.3.2.30
The value of this object provides the label of the Secondary Control Signal Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000benumSecStatusSig		1.3.6.1.4.1.1166.6.1.2.18.3.2.31
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueSecStatusSig		1.3.6.1.4.1.1166.6.1.2.18.3.2.32
The value of this object is the current value of the parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	short(1), valid(2), invalid(3), open(4)

rsw1000bstateflagSecStatusSig		1.3.6.1.4.1.1166.6.1.2.18.3.2.33
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelFactoryDefault		1.3.6.1.4.1.1166.6.1.2.18.3.2.34
The value of this object provides the label of the Factory Default Reset Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000benumFactoryDefault		1.3.6.1.4.1.1166.6.1.2.18.3.2.35
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueFactoryDefault		1.3.6.1.4.1.1166.6.1.2.18.3.2.36
This is a one-shot control value. A read of this value is always the value corresponding to off(1). A write of the value corresponding to on(2) results in effecting the factory default reset. A write of the value corresponding to off(1) has no effect.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

rsw1000bstateflagFactoryDefault		1.3.6.1.4.1.1166.6.1.2.18.3.2.37
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2Rsw1000bStatusTableIndex		1.3.6.1.4.1.1166.6.1.2.18.4.3.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

rsw1000blabelBoot		1.3.6.1.4.1.1166.6.1.2.18.4.3.2
The value of this object provides the label of the Boot Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueBoot		1.3.6.1.4.1.1166.6.1.2.18.4.3.3
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

rsw1000bstateflagBoot		1.3.6.1.4.1.1166.6.1.2.18.4.3.4
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelFlash		1.3.6.1.4.1.1166.6.1.2.18.4.3.5
The value of this object provides the label of the Flash Status Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueFlash		1.3.6.1.4.1.1166.6.1.2.18.4.3.6
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

rsw1000bstateflagFlash		1.3.6.1.4.1.1166.6.1.2.18.4.3.7
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.18.4.3.8
The value of this object provides the label of the Factory Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.18.4.3.9
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

rsw1000bstateflagFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.18.4.3.10
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelRFDataCRC		1.3.6.1.4.1.1166.6.1.2.18.4.3.11
The value of this object provides the label of the Radio Frequency Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueRFDataCRC		1.3.6.1.4.1.1166.6.1.2.18.4.3.12
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

rsw1000bstateflagRFDataCRC		1.3.6.1.4.1.1166.6.1.2.18.4.3.13
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelAlarmDataCRC		1.3.6.1.4.1.1166.6.1.2.18.4.3.14
The value of this object provides the label of the Alarm Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueAlarmDataCRC		1.3.6.1.4.1.1166.6.1.2.18.4.3.15
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

rsw1000bstateflagAlarmDataCRC		1.3.6.1.4.1.1166.6.1.2.18.4.3.16
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelRFSignalStatus		1.3.6.1.4.1.1166.6.1.2.18.4.3.17
The value of this object provides the label of the RF Signal Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvalueRFSignalStatus		1.3.6.1.4.1.1166.6.1.2.18.4.3.18
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

rsw1000bstateflagRFSignalStatus		1.3.6.1.4.1.1166.6.1.2.18.4.3.19
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

rsw1000blabelPriActiveStatus		1.3.6.1.4.1.1166.6.1.2.18.4.3.20
The value of this object provides the label of the Secondary Active Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bvaluePriActiveStatus		1.3.6.1.4.1.1166.6.1.2.18.4.3.21
The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

rsw1000bstateflagPriActiveStatus		1.3.6.1.4.1.1166.6.1.2.18.4.3.22
The value of this object provides the state of the the parameter. (1-hidden, 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2Rsw1000bFactoryTableIndex		1.3.6.1.4.1.1166.6.1.2.18.5.4.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

rsw1000bbootControlByte		1.3.6.1.4.1.1166.6.1.2.18.5.4.2
The value of this object indicates which bank the firmware is currently being boot from.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsw1000bbootStatusByte		1.3.6.1.4.1.1166.6.1.2.18.5.4.3
This object indicates the status of the last boot
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsw1000bbank0CRC		1.3.6.1.4.1.1166.6.1.2.18.5.4.4
This object provides the CRC code of bank 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsw1000bbank1CRC		1.3.6.1.4.1.1166.6.1.2.18.5.4.5
This object provides the CRC code of bank 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsw1000bprgEEPROMByte		1.3.6.1.4.1.1166.6.1.2.18.5.4.6
This object indicates if the EEPROM has been programmed
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsw1000bfactoryCRC		1.3.6.1.4.1.1166.6.1.2.18.5.4.7
This object provides the CRC code for the Factory data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsw1000bcalculateCRC		1.3.6.1.4.1.1166.6.1.2.18.5.4.8
This oject indicates which of the Emnums will have the CRC calculated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	factory(1), rf(2), alarm(3)

rsw1000bhourMeter		1.3.6.1.4.1.1166.6.1.2.18.5.4.9
This object provides the hour meter reading of the module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsw1000bflashPrgCnt0		1.3.6.1.4.1.1166.6.1.2.18.5.4.10
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsw1000bflashPrgCnt1		1.3.6.1.4.1.1166.6.1.2.18.5.4.11
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rsw1000bflashBank0Rev		1.3.6.1.4.1.1166.6.1.2.18.5.4.12
This object provides the revision of flash bank 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bflashBank1Rev		1.3.6.1.4.1.1166.6.1.2.18.5.4.13
This object provides the revision of flash bank 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rsw1000bSubagentRev		1.3.6.1.4.1.1166.6.1.2.18.5.4.14
This object provides the revision of the subagent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rxgx2Rsw1000bHoldTimeTableIndex		1.3.6.1.4.1.1166.6.1.2.18.6.5.1
The value of this object is the index of the data object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

rxgx2Rsw1000bHoldTimeSpecIndex		1.3.6.1.4.1.1166.6.1.2.18.6.5.2
The value of this object identifies the index of the alarm object to be modified.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4294967295

rxgx2Rsw1000bHoldTimeData		1.3.6.1.4.1.1166.6.1.2.18.6.5.3
The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered into bytes zero and one of the object. Bytes three and four are used to entering the hold time for the specified alarm object. The Hold timer data ranges from 0 to 1300 seconds. The index of this object corresponds to the alarm object to be modified. Alarm Hold timers correspond to the index of this object as follows: Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx, The hold time is represented in seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

trapRSW1000bConfigChangeInteger		1
This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapRSW1000bConfigChangeDisplayString		2
This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapRSW1000bRFInputAlarm		3
This trap is issued when the Switch Control signals go out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapRSW1000bFanCurrentAlarm		4
This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapRSW1000bModuleTempAlarm		5
This trap is issued when the Temperature goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapRSW1000bFlashAlarm		6
This trap is issued when the detects an error during Flash memory operations.
TRAP-TYPE

trapRSW1000bBankBootAlarm		7
This trap is issued when the detects an error while booting from bank 0 or bank 1.
TRAP-TYPE

trapRSW1000bAlarmDataCRCAlarm		8
This trap is issued when the Alarm Data CRC is incorrect.
TRAP-TYPE

trapRSW1000bFactoryDataCRCAlarm		9
This trap is issued when the Factory Data CRC is incorrect.
TRAP-TYPE

trapRSW1000bInputSwitchedAlarm		10
This trap is issued when the RF input switched.
TRAP-TYPE

trapRSW1000bResetFactoryDefaultAlarm		11
This trap is issued when the Factory Default Reset occurs.
TRAP-TYPE

trapRSW1000bSecondaryInputActiveAlarm		12
This trap is issued when the scondary input becomes active.
TRAP-TYPE

trapRSW1000bCalibrationDataCRCAlarm		13
This trap is issued when the calibration data CRC is incorrect.
TRAP-TYPE