ONEACCESS-SSH-CONFIG-MIB

File: ONEACCESS-SSH-CONFIG-MIB.mib (5690 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
ONEACCESS-GLOBAL-REG

Imported symbols

OBJECT-GROUP IpAddress Integer32
Counter32 Counter64 Unsigned32
OBJECT-TYPE MODULE-IDENTITY DisplayString
RowStatus PhysAddress TruthValue
oacExpIMIpAcl oacMIBModules oacExpIMManagement

Defined Values

oacSshConfigMIB 1.3.6.1.4.1.13191.1.100.2004
Fixed the issues related to octet string range
MODULE-IDENTITY    

oacSshConfig 1.3.6.1.4.1.13191.10.3.4.22
OBJECT IDENTIFIER    

oacSshConfigObjects 1.3.6.1.4.1.13191.10.3.4.22.1
OBJECT IDENTIFIER    

oacSshConfigConformance 1.3.6.1.4.1.13191.10.3.4.22.2
OBJECT IDENTIFIER    

oacSshDsaKey 1.3.6.1.4.1.13191.10.3.4.22.1.1
To generate a public key.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER keysize-0bits(0), keysize-256bits(256), keysize-512bits(512), keysize-1024bits(1024), keysize-2048bits(2048)  

oacSshEnabled 1.3.6.1.4.1.13191.10.3.4.22.1.2
Controls the operation of the Secure Shell server task on the oneos. When enabled, the SSH server will accept connection requests and create a secure transport layer on which to transmit system configuration data.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

oacSshIdleTimeout 1.3.6.1.4.1.13191.10.3.4.22.1.3
If a connected SSH client is inactive during a certain time, it is disconnected. By default, any inactive SSH client is disconnected after 10 minutes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 120..4294967295  

oacSshAuthTimeout 1.3.6.1.4.1.13191.10.3.4.22.1.4
If an SSH client is in the authentication phase and it is inactive during a certain time it is disconnected. By default, any inactive SSH client doing an authentication is disconnected after 2 minutes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5..120  

oacSshAuthRetries 1.3.6.1.4.1.13191.10.3.4.22.1.5
By default, the authentication retries number is 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

oacSshBindInterface 1.3.6.1.4.1.13191.10.3.4.22.1.6
To permit SSH access from an interface, default configuration is any.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

oacSshBindAcl 1.3.6.1.4.1.13191.10.3.4.22.1.7
To restrict access to SSH clients by using a list of addresses standing for the list of permitted source IP addresses.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

oacSshMaxSessions 1.3.6.1.4.1.13191.10.3.4.22.1.8
By default, the maximum number of channels per session is 5 and the maximum number of local port forwarding sessions is 5.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..5  

oacSshMaxSessionChannels 1.3.6.1.4.1.13191.10.3.4.22.1.9
Maximum number of channels that a SSH session can use.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

oacSshConfigGroups 1.3.6.1.4.1.13191.10.3.4.22.2.1
OBJECT IDENTIFIER    

oacSshConfigGroup 1.3.6.1.4.1.13191.10.3.4.22.2.1.1
Group of SSH objects
Status: current Access: read-write
OBJECT-GROUP    

oacSshCompls 1.3.6.1.4.1.13191.10.3.4.22.2.2
OBJECT IDENTIFIER