P-BRIDGE-MIB

File: P-BRIDGE-MIB.mib (33710 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
BRIDGE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Counter64 TruthValue TimeInterval
MacAddress TEXTUAL-CONVENTION MODULE-COMPLIANCE
OBJECT-GROUP dot1dTp dot1dTpPort
dot1dBridge dot1dBasePortEntry dot1dBasePort

Defined Types

EnabledStatus  
A simple status value for the object.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

Dot1dPortCapabilitiesEntry  
SEQUENCE    
  dot1dPortCapabilities BITS

Dot1dPortPriorityEntry  
SEQUENCE    
  dot1dPortDefaultUserPriority INTEGER
  dot1dPortNumTrafficClasses INTEGER

Dot1dUserPriorityRegenEntry  
SEQUENCE    
  dot1dUserPriority INTEGER
  dot1dRegenUserPriority INTEGER

Dot1dTrafficClassEntry  
SEQUENCE    
  dot1dTrafficClassPriority INTEGER
  dot1dTrafficClass INTEGER

Dot1dPortOutboundAccessPriorityEntry  
SEQUENCE    
  dot1dPortOutboundAccessPriority INTEGER

Dot1dPortGarpEntry  
SEQUENCE    
  dot1dPortGarpJoinTime TimeInterval
  dot1dPortGarpLeaveTime TimeInterval
  dot1dPortGarpLeaveAllTime TimeInterval

Dot1dPortGmrpEntry  
SEQUENCE    
  dot1dPortGmrpStatus EnabledStatus
  dot1dPortGmrpFailedRegistrations Counter32
  dot1dPortGmrpLastPduOrigin MacAddress

Dot1dTpHCPortEntry  
SEQUENCE    
  dot1dTpHCPortInFrames Counter64
  dot1dTpHCPortOutFrames Counter64
  dot1dTpHCPortInDiscards Counter64

Dot1dTpPortOverflowEntry  
SEQUENCE    
  dot1dTpPortInOverflowFrames Counter32
  dot1dTpPortOutOverflowFrames Counter32
  dot1dTpPortInOverflowDiscards Counter32

Defined Values

pBridgeMIB 1.3.6.1.2.1.17.6
The Bridge MIB Extension module for managing Priority and Multicast Filtering, defined by IEEE 802.1D-1998.
MODULE-IDENTITY    

pBridgeMIBObjects 1.3.6.1.2.1.17.6.1
OBJECT IDENTIFIER    

dot1dExtBase 1.3.6.1.2.1.17.6.1.1
OBJECT IDENTIFIER    

dot1dPriority 1.3.6.1.2.1.17.6.1.2
OBJECT IDENTIFIER    

dot1dGarp 1.3.6.1.2.1.17.6.1.3
OBJECT IDENTIFIER    

dot1dGmrp 1.3.6.1.2.1.17.6.1.4
OBJECT IDENTIFIER    

dot1dDeviceCapabilities 1.3.6.1.2.1.17.6.1.1.1
Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities.
Status: current Access: read-only
OBJECT-TYPE    
  BITS dot1dExtendedFilteringServices(0), dot1dTrafficClasses(1), dot1qStaticEntryIndividualPort(2), dot1qIVLCapable(3), dot1qSVLCapable(4), dot1qHybridCapable(5), dot1qConfigurablePvidTagging(6), dot1dLocalVlanCapable(7)  

dot1dTrafficClassesEnabled 1.3.6.1.2.1.17.6.1.1.2
The value true(1) indicates that Traffic Classes are enabled on this bridge. When false(2), the bridge operates with a single priority level for all traffic.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot1dGmrpStatus 1.3.6.1.2.1.17.6.1.1.3
The administrative status requested by management for GMRP. The value enabled(1) indicates that GMRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When disabled(2), GMRP is disabled, in all VLANs, on all ports and all GMRP packets will be forwarded transparently. This object affects both Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on all ports.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dot1dPortCapabilitiesTable 1.3.6.1.2.1.17.6.1.1.4
A table that contains capabilities information about every port that is associated with this bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dPortCapabilitiesEntry

dot1dPortCapabilitiesEntry 1.3.6.1.2.1.17.6.1.1.4.1
A set of capabilities information about this port indexed by dot1dBasePort.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1dPortCapabilitiesEntry  

dot1dPortCapabilities 1.3.6.1.2.1.17.6.1.1.4.1.1
Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis that are implemented by this device and are manageable through this MIB.
Status: current Access: read-only
OBJECT-TYPE    
  BITS dot1qDot1qTagging(0), dot1qConfigurableAcceptableFrameTypes(1), dot1qIngressFiltering(2)  

dot1dPortPriorityTable 1.3.6.1.2.1.17.6.1.2.1
A table that contains information about every port that is associated with this transparent bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dPortPriorityEntry

dot1dPortPriorityEntry 1.3.6.1.2.1.17.6.1.2.1.1
A list of Default User Priorities for each port of a transparent bridge. This is indexed by dot1dBasePort.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1dPortPriorityEntry  

dot1dPortDefaultUserPriority 1.3.6.1.2.1.17.6.1.2.1.1.1
The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

dot1dPortNumTrafficClasses 1.3.6.1.2.1.17.6.1.2.1.1.2
The number of egress traffic classes supported on this port. This object may optionally be read-only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

dot1dUserPriorityRegenTable 1.3.6.1.2.1.17.6.1.2.2
A list of Regenerated User Priorities for each received User Priority on each port of a bridge. The Regenerated User Priority value may be used to index the Traffic Class Table for each input port. This only has effect on media that support native User Priority. The default values for Regenerated User Priorities are the same as the User Priorities.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dUserPriorityRegenEntry

dot1dUserPriorityRegenEntry 1.3.6.1.2.1.17.6.1.2.2.1
A mapping of incoming User Priority to a Regenerated User Priority.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1dUserPriorityRegenEntry  

dot1dUserPriority 1.3.6.1.2.1.17.6.1.2.2.1.1
The User Priority for a frame received on this port.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..7  

dot1dRegenUserPriority 1.3.6.1.2.1.17.6.1.2.2.1.2
The Regenerated User Priority the incoming User Priority is mapped to for this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

dot1dTrafficClassTable 1.3.6.1.2.1.17.6.1.2.3
A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge. Traffic class is a number in the range (0..(dot1dPortNumTrafficClasses-1)).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dTrafficClassEntry

dot1dTrafficClassEntry 1.3.6.1.2.1.17.6.1.2.3.1
User Priority to Traffic Class mapping.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1dTrafficClassEntry  

dot1dTrafficClassPriority 1.3.6.1.2.1.17.6.1.2.3.1.1
The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port. For untagged frames received from non-Ethernet media, this value is equal to the dot1dRegenUserPriority value for the ingress port and media-specific user priority.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..7  

dot1dTrafficClass 1.3.6.1.2.1.17.6.1.2.3.1.2
The Traffic Class the received frame is mapped to.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

dot1dPortOutboundAccessPriorityTable 1.3.6.1.2.1.17.6.1.2.4
A table mapping Regenerated User Priority to Outbound Access Priority. This is a fixed mapping for all port types, with two options for 802.5 Token Ring.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dPortOutboundAccessPriorityEntry

dot1dPortOutboundAccessPriorityEntry 1.3.6.1.2.1.17.6.1.2.4.1
Regenerated User Priority to Outbound Access Priority mapping.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1dPortOutboundAccessPriorityEntry  

dot1dPortOutboundAccessPriority 1.3.6.1.2.1.17.6.1.2.4.1.1
The Outbound Access Priority the received frame is mapped to.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

dot1dPortGarpTable 1.3.6.1.2.1.17.6.1.3.1
A table of GARP control information about every bridge port. This is indexed by dot1dBasePort.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dPortGarpEntry

dot1dPortGarpEntry 1.3.6.1.2.1.17.6.1.3.1.1
GARP control information for a bridge port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1dPortGarpEntry  

dot1dPortGarpJoinTime 1.3.6.1.2.1.17.6.1.3.1.1.1
The GARP Join time, in centiseconds.
Status: current Access: read-write
OBJECT-TYPE    
  TimeInterval  

dot1dPortGarpLeaveTime 1.3.6.1.2.1.17.6.1.3.1.1.2
The GARP Leave time, in centiseconds.
Status: current Access: read-write
OBJECT-TYPE    
  TimeInterval  

dot1dPortGarpLeaveAllTime 1.3.6.1.2.1.17.6.1.3.1.1.3
The GARP LeaveAll time, in centiseconds.
Status: current Access: read-write
OBJECT-TYPE    
  TimeInterval  

dot1dPortGmrpTable 1.3.6.1.2.1.17.6.1.4.1
A table of GMRP control and status information about every bridge port. Augments the dot1dBasePortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dPortGmrpEntry

dot1dPortGmrpEntry 1.3.6.1.2.1.17.6.1.4.1.1
GMRP control and status information for a bridge port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1dPortGmrpEntry  

dot1dPortGmrpStatus 1.3.6.1.2.1.17.6.1.4.1.1.1
The administrative state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port in all VLANs as long as dot1dGmrpStatus is also enabled(1). A value of disabled(2) indicates that GMRP is disabled on this port in all VLANs: any GMRP packets received will be silently discarded and no GMRP registrations will be propagated from other ports. Setting this to a value of enabled(1) will be stored by the agent but will only take effect on the GMRP protocol operation if dot1dGmrpStatus also indicates the value enabled(1). This object affects all GMRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on this port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dot1dPortGmrpFailedRegistrations 1.3.6.1.2.1.17.6.1.4.1.1.2
The total number of failed GMRP registrations, for any reason, in all VLANs, on this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot1dPortGmrpLastPduOrigin 1.3.6.1.2.1.17.6.1.4.1.1.3
The Source MAC Address of the last GMRP message received on this port.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dot1dTpHCPortTable 1.3.6.1.2.1.17.4.5
A table that contains information about every high capacity port that is associated with this transparent bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dTpHCPortEntry

dot1dTpHCPortEntry 1.3.6.1.2.1.17.4.5.1
Statistics information for each high capacity port of a transparent bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1dTpHCPortEntry  

dot1dTpHCPortInFrames 1.3.6.1.2.1.17.4.5.1.1
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dot1dTpHCPortOutFrames 1.3.6.1.2.1.17.4.5.1.2
The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dot1dTpHCPortInDiscards 1.3.6.1.2.1.17.4.5.1.3
Count of valid frames that have been received by this port from its segment which were discarded (i.e., filtered) by the Forwarding Process.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

dot1dTpPortOverflowTable 1.3.6.1.2.1.17.4.6
A table that contains the most-significant bits of statistics counters for ports that are associated with this transparent bridge that are on high capacity interfaces, as defined in the conformance clauses for this table. This table is provided as a way to read 64-bit counters for agents which support only SNMPv1. Note that the reporting of most-significant and least-significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dTpPortOverflowEntry

dot1dTpPortOverflowEntry 1.3.6.1.2.1.17.4.6.1
The most significant bits of statistics counters for a high capacity interface of a transparent bridge. Each object is associated with a corresponding object in dot1dTpPortTable which indicates the least significant bits of the counter.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1dTpPortOverflowEntry  

dot1dTpPortInOverflowFrames 1.3.6.1.2.1.17.4.6.1.1
The number of times the associated dot1dTpPortInFrames counter has overflowed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot1dTpPortOutOverflowFrames 1.3.6.1.2.1.17.4.6.1.2
The number of times the associated dot1dTpPortOutFrames counter has overflowed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot1dTpPortInOverflowDiscards 1.3.6.1.2.1.17.4.6.1.3
The number of times the associated dot1dTpPortInDiscards counter has overflowed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pBridgeConformance 1.3.6.1.2.1.17.6.2
OBJECT IDENTIFIER    

pBridgeGroups 1.3.6.1.2.1.17.6.2.1
OBJECT IDENTIFIER    

pBridgeCompliances 1.3.6.1.2.1.17.6.2.2
OBJECT IDENTIFIER    

pBridgeExtCapGroup 1.3.6.1.2.1.17.6.2.1.1
A collection of objects indicating the optional capabilites of the device.
Status: current Access: read-only
OBJECT-GROUP    

pBridgeDeviceGmrpGroup 1.3.6.1.2.1.17.6.2.1.2
A collection of objects providing device-level control for the Multicast Filtering extended bridge services.
Status: current Access: read-only
OBJECT-GROUP    

pBridgeDevicePriorityGroup 1.3.6.1.2.1.17.6.2.1.3
A collection of objects providing device-level control for the Priority services.
Status: current Access: read-only
OBJECT-GROUP    

pBridgeDefaultPriorityGroup 1.3.6.1.2.1.17.6.2.1.4
A collection of objects defining the User Priority applicable to each port for media which do not support native User Priority.
Status: current Access: read-only
OBJECT-GROUP    

pBridgeRegenPriorityGroup 1.3.6.1.2.1.17.6.2.1.5
A collection of objects defining the User Priorities applicable to each port for media which support native User Priority.
Status: current Access: read-only
OBJECT-GROUP    

pBridgePriorityGroup 1.3.6.1.2.1.17.6.2.1.6
A collection of objects defining the traffic classes within a bridge for each evaluated User Priority.
Status: current Access: read-only
OBJECT-GROUP    

pBridgeAccessPriorityGroup 1.3.6.1.2.1.17.6.2.1.7
A collection of objects defining the media dependent outbound access level for each priority.
Status: current Access: read-only
OBJECT-GROUP    

pBridgePortGarpGroup 1.3.6.1.2.1.17.6.2.1.8
A collection of objects providing port level control and status information for GARP operation.
Status: current Access: read-only
OBJECT-GROUP    

pBridgePortGmrpGroup 1.3.6.1.2.1.17.6.2.1.9
A collection of objects providing port level control and status information for GMRP operation.
Status: current Access: read-only
OBJECT-GROUP    

pBridgeHCPortGroup 1.3.6.1.2.1.17.6.2.1.10
A collection of objects providing 64-bit statistics counters for high capacity bridge ports.
Status: current Access: read-only
OBJECT-GROUP    

pBridgePortOverflowGroup 1.3.6.1.2.1.17.6.2.1.11
A collection of objects providing overflow statistics counters for high capacity bridge ports.
Status: current Access: read-only
OBJECT-GROUP    

pBridgeCompliance 1.3.6.1.2.1.17.6.2.2.1
The compliance statement for device support of Priority and Multicast Filtering extended bridging services.
Status: current Access: read-only
MODULE-COMPLIANCE