PACKETEER-MIB

File: PACKETEER-MIB.mib (77295 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
SNMPv2-TC RFC-1215

Imported symbols

IpAddress Counter Gauge
enterprises OBJECT-TYPE DisplayString
DateAndTime TRAP-TYPE

Defined Types

LinkEntry  
SEQUENCE    
  linkIndex INTEGER
  linkName DisplayString
  linkByteCount Counter
  linkByteCountHi Counter
  linkPkts Counter
  linkDataPkts Counter
  linkReTxs Counter
  linkReTxTosses Counter
  linkCirFails Counter
  linkCirAllocs Counter
  linkEirAllocs Counter
  linkPeakTcpConns Gauge
  linkTcpConnInits Counter
  linkTcpConnExits Counter
  linkTcpConnRefuses Counter
  linkTcpConnIgnores Counter
  linkTcpConnAborts Counter
  linkTcpConnDenies Counter
  linkTcpConnTimeouts Counter
  linkPeakUdpConns Gauge
  linkUdpConnInits Counter
  linkUdpConnExits Counter
  linkSize INTEGER
  linkRate Gauge
  linkRateAllocations Gauge
  linkPeakGuaranteedRateFlows Gauge
  linkPeakRateFlows Gauge
  linkReTxByteCount Counter
  linkReTxByteCountHi Counter
  linkTotalRxPkts Counter
  linkTotalTxPkts Counter
  linkRxNoBufs Counter
  linkRxPktDrops Counter
  linkTxPktDrops Counter
  linkRxErrors Counter
  linkTxErrors Counter
  linkTcpAllocFails Counter
  linkIpdgAllocFails Counter
  linkHostdbAllocFails Counter
  linkShapingMode INTEGER
  linkAutoclassifyMode INTEGER
  linkMacSameSidePkts Counter
  linkPassthruPkts Counter
  linkTotalRxBytes Counter
  linkTotalRxBytesHi Counter
  linkTotalTxBytes Counter
  linkTotalTxBytesHi Counter
  linkClassChecks Counter
  linkPassthruBytes Counter
  linkCompressionMode INTEGER
  linkPeakPreCompressionRate Gauge
  linkPeakPostCompressionRate Gauge
  linkNonComprsnBytes Counter
  linkNonComprsnBytesHi Counter
  linkPostComprsnBytes Counter
  linkPostComprsnBytesHi Counter
  linkPreComprsnBytes Counter
  linkPreComprsnBytesHi Counter

PartitionEntry  
SEQUENCE    
  partitionIndex INTEGER
  partitionName DisplayString
  partitionLinkDirection INTEGER
  partitionByteCount Counter
  partitionByteCountHi Counter
  partitionPkts Counter
  partitionDataPkts Counter
  partitionReTxs Counter
  partitionReTxTosses Counter
  partitionCirFails Counter
  partitionCirAllocs Counter
  partitionEirAllocs Counter
  partitionPeakTcpConns Gauge
  partitionTcpConnInits Counter
  partitionTcpConnExits Counter
  partitionTcpConnRefuses Counter
  partitionTcpConnIgnores Counter
  partitionTcpConnAborts Counter
  partitionTcpConnDenies Counter
  partitionTcpConnTimeouts Counter
  partitionPeakUdpConns Gauge
  partitionUdpConnInits Counter
  partitionUdpConnExits Counter
  partitionMinimumBps INTEGER
  partitionBurstLimit INTEGER
  partitionRate Gauge
  partitionCirRate Gauge
  partitionEirRate Gauge
  partitionUnreservedRate Gauge
  partitionFirstSatisfiedPriority Gauge
  partitionTimeOverLimit Counter
  partitionRateAllocations Counter
  partitionPeakGuaranteedRateFlows Gauge
  partitionPeakRateFlows Gauge
  partitionReTxByteCount Counter
  partitionReTxByteCountHi Counter
  partitionDynamicCapCount Counter
  partitionDynamicNoCount Counter
  partitionDynamicLiveUserCount Gauge
  partitionCommittmentFailures Counter
  partitionLateDropPktCount Gauge
  partitionLateDropPktCountHi Gauge
  partitionLateDropByteCount Gauge
  partitionLateDropByteCountHi Gauge
  partitionSchedDropPktCount Gauge
  partitionSchedDropPktCountHi Gauge
  partitionSchedDropByteCount Gauge
  partitionSchedDropByteCountHi Gauge
  partitionFrameBytes Counter
  partitionFrameBytesHi Counter
  partitionFrameTargetRate Gauge
  partitionFrameTargetRateHi Gauge
  partitionFrameCount Counter
  partitionEcnCount Counter
  partitionNonComprsnBytes Counter
  partitionNonComprsnBytesHi Counter
  partitionPostComprsnBytes Counter
  partitionPostComprsnBytesHi Counter
  partitionPreComprsnBytes Counter
  partitionPreComprsnBytesHi Counter

ClassEntry  
SEQUENCE    
  classIndex INTEGER
  className DisplayString
  classOwningPartName DisplayString
  classLinkDirection INTEGER
  classByteCount Counter
  classByteCountHi Counter
  classPkts Counter
  classDataPkts Counter
  classReTxs Counter
  classReTxTosses Counter
  classCirFails Counter
  classCirAllocs Counter
  classEirAllocs Counter
  classPeakTcpConns Gauge
  classTcpConnInits Counter
  classTcpConnExits Counter
  classTcpConnRefuses Counter
  classTcpConnIgnores Counter
  classTcpConnAborts Counter
  classTcpConnDenies Counter
  classTcpConnTimeouts Counter
  classPeakUdpConns Gauge
  classUdpConnInits Counter
  classUdpConnExits Counter
  classHits Counter
  classPolicyHits Counter
  classRate Gauge
  classRateAllocations Gauge
  classPeakGuaranteedRateFlows Gauge
  classPeakRateFlows Gauge
  classDataDelayEvents Counter
  classDataDelayTimeCum INTEGER
  classReservedOne Counter
  classReTxByteCount Counter
  classReTxByteCountHi Counter
  classFullName DisplayString
  classCurrentRate Gauge
  classPktExchangeTime Counter
  classPktExchangeTimeHi Counter
  classPktExchangeTimeSamples Counter
  classClientFloodBlock Counter
  classServerFloodBlock Counter
  classAppAvailability INTEGER
  classPeakIpdgConns Gauge
  classWebResponse2XX Counter
  classWebResponse3XX Counter
  classWebResponse4XX Counter
  classWebResponse5XX Counter
  classNonComprsnBytes Counter
  classNonComprsnBytesHi Counter
  classPostComprsnBytes Counter
  classPostComprsnBytesHi Counter
  classPreComprsnBytes Counter
  classPreComprsnBytesHi Counter

TrapDestEntry  
SEQUENCE    
  trapDestIpAddr IpAddress
  trapDestStatus INTEGER

Defined Values

packeteer 1.3.6.1.4.1.2334
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.2334.1
OBJECT IDENTIFIER    

packetShaper 1.3.6.1.4.1.2334.1.1
OBJECT IDENTIFIER    

packetShaper-2000 1.3.6.1.4.1.2334.1.1.1
OBJECT IDENTIFIER    

packetShaper-4000 1.3.6.1.4.1.2334.1.1.2
OBJECT IDENTIFIER    

packetShaper-1000 1.3.6.1.4.1.2334.1.1.3
OBJECT IDENTIFIER    

packetShaper-2500 1.3.6.1.4.1.2334.1.1.4
OBJECT IDENTIFIER    

packetShaper-4500 1.3.6.1.4.1.2334.1.1.5
OBJECT IDENTIFIER    

packetShaper-1500 1.3.6.1.4.1.2334.1.1.6
OBJECT IDENTIFIER    

packetShaper-asm50 1.3.6.1.4.1.2334.1.1.7
OBJECT IDENTIFIER    

packetShaper-asm70 1.3.6.1.4.1.2334.1.1.8
OBJECT IDENTIFIER    

packetShaper-asm30 1.3.6.1.4.1.2334.1.1.9
OBJECT IDENTIFIER    

packetShaper-asm90 1.3.6.1.4.1.2334.1.1.10
OBJECT IDENTIFIER    

packetShaper-6500 1.3.6.1.4.1.2334.1.1.11
OBJECT IDENTIFIER    

packetShaper-8500 1.3.6.1.4.1.2334.1.1.12
OBJECT IDENTIFIER    

packetShaper-asm110 1.3.6.1.4.1.2334.1.1.13
OBJECT IDENTIFIER    

packetShaper-1550 1.3.6.1.4.1.2334.1.1.14
OBJECT IDENTIFIER    

packetShaper-9500 1.3.6.1.4.1.2334.1.1.15
OBJECT IDENTIFIER    

packetShaper-2550 1.3.6.1.4.1.2334.1.1.16
OBJECT IDENTIFIER    

packetShaper-10000 1.3.6.1.4.1.2334.1.1.17
OBJECT IDENTIFIER    

packeteerMibs 1.3.6.1.4.1.2334.2
OBJECT IDENTIFIER    

psCommonMib 1.3.6.1.4.1.2334.2.1
OBJECT IDENTIFIER    

psSettings 1.3.6.1.4.1.2334.2.1.1
OBJECT IDENTIFIER    


psPartitions 1.3.6.1.4.1.2334.2.1.3
OBJECT IDENTIFIER    

psClasses 1.3.6.1.4.1.2334.2.1.4
OBJECT IDENTIFIER    

psAlarms 1.3.6.1.4.1.2334.2.1.5
OBJECT IDENTIFIER    

psAdmin 1.3.6.1.4.1.2334.2.1.6
OBJECT IDENTIFIER    

psUserEvents 1.3.6.1.4.1.2334.2.1.8
OBJECT IDENTIFIER    

psHighAv 1.3.6.1.4.1.2334.2.1.9
OBJECT IDENTIFIER    

psAgentEvent 1.3.6.1.4.1.2334.2.1.10
OBJECT IDENTIFIER    

psShapingStatusOper 1.3.6.1.4.1.2334.2.1.1.1
This object reflects the current operational traffic shaping status of the PacketShaper. The value of this object reflects the status of the front panel status LED. If all of the following conditions are true, then the object is set to 1, otherwise it is 2: links are up, shaping is on, and the siterouter is usable (if configured).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), off(2)  

linkTableSize 1.3.6.1.4.1.2334.2.1.2.1
Number of entries in the linkTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkTable 1.3.6.1.4.1.2334.2.1.2.2
A list of link entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LinkEntry

linkEntry 1.3.6.1.4.1.2334.2.1.2.2.1
A link entry containing containing statistical objects for a link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LinkEntry  

linkIndex 1.3.6.1.4.1.2334.2.1.2.2.1.1
A unique ID for a link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkName 1.3.6.1.4.1.2334.2.1.2.2.1.2
A unique name for a link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

linkByteCount 1.3.6.1.4.1.2334.2.1.2.2.1.3
The byte count in the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkByteCountHi 1.3.6.1.4.1.2334.2.1.2.2.1.4
The High 32 bits of byte count in the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkPkts 1.3.6.1.4.1.2334.2.1.2.2.1.5
The packet count in the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkDataPkts 1.3.6.1.4.1.2334.2.1.2.2.1.6
The TCP data packet count in the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkReTxs 1.3.6.1.4.1.2334.2.1.2.2.1.7
The TCP retransmit packet count in the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkReTxTosses 1.3.6.1.4.1.2334.2.1.2.2.1.8
The TCP tossed retransmit packet count in the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkCirFails 1.3.6.1.4.1.2334.2.1.2.2.1.9
The count of CIR fails events in the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkCirAllocs 1.3.6.1.4.1.2334.2.1.2.2.1.10
The count of CIR alloc events in the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkEirAllocs 1.3.6.1.4.1.2334.2.1.2.2.1.11
The count of EIR alloc events in the link. This variable is obselete and should not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkPeakTcpConns 1.3.6.1.4.1.2334.2.1.2.2.1.12
The peak number of active TCP flows in the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

linkTcpConnInits 1.3.6.1.4.1.2334.2.1.2.2.1.13
The count of TCP flows started in the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTcpConnExits 1.3.6.1.4.1.2334.2.1.2.2.1.14
The count of TCP flows exited in the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTcpConnRefuses 1.3.6.1.4.1.2334.2.1.2.2.1.15
The count of TCP flows exited by TCP refuse in the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTcpConnIgnores 1.3.6.1.4.1.2334.2.1.2.2.1.16
The count of TCP flows exited by being ignored in the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTcpConnAborts 1.3.6.1.4.1.2334.2.1.2.2.1.17
The count of TCP flows aborted in the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTcpConnDenies 1.3.6.1.4.1.2334.2.1.2.2.1.18
The count of TCP flows denied by CIR fail in the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTcpConnTimeouts 1.3.6.1.4.1.2334.2.1.2.2.1.19
The count of TCP flows timed out by pshaper in the link. This variable is obsolete and should not be used.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

linkPeakUdpConns 1.3.6.1.4.1.2334.2.1.2.2.1.20
The peak number of active UDP flows in the link. This variable is deprecated, and should no longer be used.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Gauge  

linkUdpConnInits 1.3.6.1.4.1.2334.2.1.2.2.1.21
The count of UDP flows started in the link. This variable is deprecated, and should no longer be used.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

linkUdpConnExits 1.3.6.1.4.1.2334.2.1.2.2.1.22
The count of UDP flows exited in the link. This variable is deprecated, and should no longer be used.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

linkSize 1.3.6.1.4.1.2334.2.1.2.2.1.23
The size in bps of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkRate 1.3.6.1.4.1.2334.2.1.2.2.1.24
The peak bps of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

linkRateAllocations 1.3.6.1.4.1.2334.2.1.2.2.1.25
The count of rate allocations on the link. This variable is obsolete and should not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

linkPeakGuaranteedRateFlows 1.3.6.1.4.1.2334.2.1.2.2.1.26
The peak number of guaranteed rate flows active on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

linkPeakRateFlows 1.3.6.1.4.1.2334.2.1.2.2.1.27
The peak number of rate-based flows active on the link. This variable is obsolete and should not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

linkReTxByteCount 1.3.6.1.4.1.2334.2.1.2.2.1.28
The count of retransmitted bytes on the link. This is the low-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkReTxByteCountHi 1.3.6.1.4.1.2334.2.1.2.2.1.29
The count of retransmitted bytes on the link. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTotalRxPkts 1.3.6.1.4.1.2334.2.1.2.2.1.30
The total packets received on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTotalTxPkts 1.3.6.1.4.1.2334.2.1.2.2.1.31
The total packets transmitted on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkRxNoBufs 1.3.6.1.4.1.2334.2.1.2.2.1.32
The count of packets that were dropped due to unavailable buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkRxPktDrops 1.3.6.1.4.1.2334.2.1.2.2.1.33
The count of packets dropped due to no buffers, no connection blocks or random dropping.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTxPktDrops 1.3.6.1.4.1.2334.2.1.2.2.1.34
The count of transmitted packets that were dropped due to no route available, an i/o error or no buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkRxErrors 1.3.6.1.4.1.2334.2.1.2.2.1.35
The count of received packets that were dropped due to hardware errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTxErrors 1.3.6.1.4.1.2334.2.1.2.2.1.36
The count of transmitted packets that were dropped due to hardware errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTcpAllocFails 1.3.6.1.4.1.2334.2.1.2.2.1.37
The count of TCP alloc fails on a link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkIpdgAllocFails 1.3.6.1.4.1.2334.2.1.2.2.1.38
The count of IPDG alloc fails on a link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkHostdbAllocFails 1.3.6.1.4.1.2334.2.1.2.2.1.39
The count of Host DB alloc fails on a link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkShapingMode 1.3.6.1.4.1.2334.2.1.2.2.1.40
The current shaping mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2), watch(4)  

linkAutoclassifyMode 1.3.6.1.4.1.2334.2.1.2.2.1.41
The current autoclassification mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

linkMacSameSidePkts 1.3.6.1.4.1.2334.2.1.2.2.1.42
The total number of same-side packets on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkPassthruPkts 1.3.6.1.4.1.2334.2.1.2.2.1.43
The total packets passed through on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTotalRxBytes 1.3.6.1.4.1.2334.2.1.2.2.1.44
The total number of bytes received on the link. This is the low-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTotalRxBytesHi 1.3.6.1.4.1.2334.2.1.2.2.1.45
The total number of bytes received on the link. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTotalTxBytes 1.3.6.1.4.1.2334.2.1.2.2.1.46
The total number of bytes transmitted on the link. This is the low-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTotalTxBytesHi 1.3.6.1.4.1.2334.2.1.2.2.1.47
The total number of bytes transmitted on the link. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkClassChecks 1.3.6.1.4.1.2334.2.1.2.2.1.48
The number of traversals of the class tree.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkPassthruBytes 1.3.6.1.4.1.2334.2.1.2.2.1.49
The total number of bytes passed through on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkCompressionMode 1.3.6.1.4.1.2334.2.1.2.2.1.50
The current compression mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

linkPeakPreCompressionRate 1.3.6.1.4.1.2334.2.1.2.2.1.51
The peak pre-compression rate on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

linkPeakPostCompressionRate 1.3.6.1.4.1.2334.2.1.2.2.1.52
The peak post-compression rate on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

linkNonComprsnBytes 1.3.6.1.4.1.2334.2.1.2.2.1.53
The total number of non-compressed bytes on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkNonComprsnBytesHi 1.3.6.1.4.1.2334.2.1.2.2.1.54
The total number of non-compressed bytes on the link. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkPreComprsnBytes 1.3.6.1.4.1.2334.2.1.2.2.1.55
The total number of bytes before compression on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkPreComprsnBytesHi 1.3.6.1.4.1.2334.2.1.2.2.1.56
The total number of bytes before compression on the link. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkPostComprsnBytes 1.3.6.1.4.1.2334.2.1.2.2.1.57
The total number of bytes after compression on the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkPostComprsnBytesHi 1.3.6.1.4.1.2334.2.1.2.2.1.58
The total number of bytes after compression on the link. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionTableSize 1.3.6.1.4.1.2334.2.1.3.1
Number of entries in the partitionTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

partitionTable 1.3.6.1.4.1.2334.2.1.3.2
A list of partition entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PartitionEntry

partitionEntry 1.3.6.1.4.1.2334.2.1.3.2.1
A partition entry containing statistical objects for a traffic partition.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PartitionEntry  

partitionIndex 1.3.6.1.4.1.2334.2.1.3.2.1.1
A unique ID for a partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

partitionName 1.3.6.1.4.1.2334.2.1.3.2.1.2
A unique name for a partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

partitionLinkDirection 1.3.6.1.4.1.2334.2.1.3.2.1.3
The orientation of a partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER in-bound(1), out-bound(2)  

partitionByteCount 1.3.6.1.4.1.2334.2.1.3.2.1.4
The byte count in the partition
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionByteCountHi 1.3.6.1.4.1.2334.2.1.3.2.1.5
The high 32 bits of byte count in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionPkts 1.3.6.1.4.1.2334.2.1.3.2.1.6
The packet count in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionDataPkts 1.3.6.1.4.1.2334.2.1.3.2.1.7
The TCP data packet count in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionReTxs 1.3.6.1.4.1.2334.2.1.3.2.1.8
The TCP retransmit packet count in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionReTxTosses 1.3.6.1.4.1.2334.2.1.3.2.1.9
The TCP tossed retransmit packet count in the partition
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionCirFails 1.3.6.1.4.1.2334.2.1.3.2.1.10
The count of CIR fail events in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionCirAllocs 1.3.6.1.4.1.2334.2.1.3.2.1.11
The count of CIR alloc events in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionEirAllocs 1.3.6.1.4.1.2334.2.1.3.2.1.12
The count of EIR alloc events in the partition. This variable is obsolete and should not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionPeakTcpConns 1.3.6.1.4.1.2334.2.1.3.2.1.13
The peak no. of active TCP flows in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionTcpConnInits 1.3.6.1.4.1.2334.2.1.3.2.1.14
The count of TCP flows started in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionTcpConnExits 1.3.6.1.4.1.2334.2.1.3.2.1.15
The count of TCP flows exited in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionTcpConnRefuses 1.3.6.1.4.1.2334.2.1.3.2.1.16
The count of TCP flows exited by TCP refuse in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionTcpConnIgnores 1.3.6.1.4.1.2334.2.1.3.2.1.17
The count of TCP flows exited by being ignored in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionTcpConnAborts 1.3.6.1.4.1.2334.2.1.3.2.1.18
The count of TCP flows aborted in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionTcpConnDenies 1.3.6.1.4.1.2334.2.1.3.2.1.19
The count of TCP flows denied by CIR fail in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionTcpConnTimeouts 1.3.6.1.4.1.2334.2.1.3.2.1.20
The count of TCP flows timed out by pshaper in the partition. This variable is obsolete and should not be used.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

partitionPeakUdpConns 1.3.6.1.4.1.2334.2.1.3.2.1.21
The peak no. of active UDP flows in the partition. This variable is deprecated, and should no longer be used.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Gauge  

partitionUdpConnInits 1.3.6.1.4.1.2334.2.1.3.2.1.22
The count of UDP flows started in the partition. This variable is deprecated, and should no longer be used.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

partitionUdpConnExits 1.3.6.1.4.1.2334.2.1.3.2.1.23
The count of UDP flows exited in the partition. This variable is deprecated, and should no longer be used.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

partitionMinimumBps 1.3.6.1.4.1.2334.2.1.3.2.1.24
The minimum size in bps of the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

partitionBurstLimit 1.3.6.1.4.1.2334.2.1.3.2.1.25
The partition burst limit in bps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

partitionRate 1.3.6.1.4.1.2334.2.1.3.2.1.26
The peak total rate in bps of the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionCirRate 1.3.6.1.4.1.2334.2.1.3.2.1.27
The peak guaranteed rate in bps of the partition. This variable is obsolete and should not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionEirRate 1.3.6.1.4.1.2334.2.1.3.2.1.28
The peak excess rate in bps of the partition. This variable is obsolete and should note be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionUnreservedRate 1.3.6.1.4.1.2334.2.1.3.2.1.29
The peak unreserved rate in bps of the partition. This variable is obsolete and should not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionFirstSatisfiedPriority 1.3.6.1.4.1.2334.2.1.3.2.1.30
The peak first priority level at which demand was satisfied (0-8).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionTimeOverLimit 1.3.6.1.4.1.2334.2.1.3.2.1.31
The total time in seconds spent over partition size for the partition
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionRateAllocations 1.3.6.1.4.1.2334.2.1.3.2.1.32
The count of rate allocations on the partition. This variable is obsolete and should not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionPeakGuaranteedRateFlows 1.3.6.1.4.1.2334.2.1.3.2.1.33
The peak number of guaranteed rate flows active on the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionPeakRateFlows 1.3.6.1.4.1.2334.2.1.3.2.1.34
The peak number of rate-based flows active on the partition. This variable is obsolete and should not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionReTxByteCount 1.3.6.1.4.1.2334.2.1.3.2.1.35
The count of retransmitted bytes on the partition. This is the low-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionReTxByteCountHi 1.3.6.1.4.1.2334.2.1.3.2.1.36
The count of retransmitted bytes on the partition. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionDynamicCapCount 1.3.6.1.4.1.2334.2.1.3.2.1.37
The count of dynamic partition reaching caps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionDynamicNoCount 1.3.6.1.4.1.2334.2.1.3.2.1.38
The count of unavailable dynamic partition .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionDynamicLiveUserCount 1.3.6.1.4.1.2334.2.1.3.2.1.39
The count of total live dynamic partition user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionCommittmentFailures 1.3.6.1.4.1.2334.2.1.3.2.1.40
The number of minute intervals that were not given the minimum programmed bandwidth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionLateDropPktCount 1.3.6.1.4.1.2334.2.1.3.2.1.41
The count of number of late drops in the partition. This is the low-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionLateDropPktCountHi 1.3.6.1.4.1.2334.2.1.3.2.1.42
The count of number of late drops in the partition . This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionLateDropByteCount 1.3.6.1.4.1.2334.2.1.3.2.1.43
The count of late drop bytes in the partition. This is the low-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionLateDropByteCountHi 1.3.6.1.4.1.2334.2.1.3.2.1.44
The count of late drop bytes in the partition . This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionSchedDropPktCount 1.3.6.1.4.1.2334.2.1.3.2.1.45
The count of number of scheduler drops in the partition. This is the low-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionSchedDropPktCountHi 1.3.6.1.4.1.2334.2.1.3.2.1.46
The count of number of scheduler drops in the partition . This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionSchedDropByteCount 1.3.6.1.4.1.2334.2.1.3.2.1.47
The count of scheduler drop bytes in the partition. This is the low-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionSchedDropByteCountHi 1.3.6.1.4.1.2334.2.1.3.2.1.48
The count of scheduler drop bytes in the partition . This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionFrameBytes 1.3.6.1.4.1.2334.2.1.3.2.1.49
The number of PVC bytes in the partition. This is the low-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionFrameBytesHi 1.3.6.1.4.1.2334.2.1.3.2.1.50
The number of PVC bytes in the partition . This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionFrameTargetRate 1.3.6.1.4.1.2334.2.1.3.2.1.51
The target frame rate in the partition. This is the low-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionFrameTargetRateHi 1.3.6.1.4.1.2334.2.1.3.2.1.52
The target frame rate in the partition . This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

partitionFrameCount 1.3.6.1.4.1.2334.2.1.3.2.1.53
The number of frames in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionEcnCount 1.3.6.1.4.1.2334.2.1.3.2.1.54
The number of ECNs in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionNonComprsnBytes 1.3.6.1.4.1.2334.2.1.3.2.1.55
The total number of non-compressed bytes in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionNonComprsnBytesHi 1.3.6.1.4.1.2334.2.1.3.2.1.56
The total number of non-compressed bytes in the partition. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionPreComprsnBytes 1.3.6.1.4.1.2334.2.1.3.2.1.57
The total number of bytes before compression in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionPreComprsnBytesHi 1.3.6.1.4.1.2334.2.1.3.2.1.58
The total number of bytes before compression in the partition. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionPostComprsnBytes 1.3.6.1.4.1.2334.2.1.3.2.1.59
The total number of bytes after compression in the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

partitionPostComprsnBytesHi 1.3.6.1.4.1.2334.2.1.3.2.1.60
The total number of bytes after compression in the partition. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classTableSize 1.3.6.1.4.1.2334.2.1.4.1
Number of entries in the classTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

classTable 1.3.6.1.4.1.2334.2.1.4.2
A list of traffic class entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ClassEntry

classEntry 1.3.6.1.4.1.2334.2.1.4.2.1
A traffic class entry containing statistical objects for a traffic class.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ClassEntry  

classIndex 1.3.6.1.4.1.2334.2.1.4.2.1.1
A unique ID for a traffic class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

className 1.3.6.1.4.1.2334.2.1.4.2.1.2
A unique name for a traffic class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

classOwningPartName 1.3.6.1.4.1.2334.2.1.4.2.1.3
A unique name for the partition which owns the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

classLinkDirection 1.3.6.1.4.1.2334.2.1.4.2.1.4
The orientation of the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER in-bound(1), out-bound(2)  

classByteCount 1.3.6.1.4.1.2334.2.1.4.2.1.5
The byte count in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classByteCountHi 1.3.6.1.4.1.2334.2.1.4.2.1.6
The High 32 bits of byte count in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classPkts 1.3.6.1.4.1.2334.2.1.4.2.1.7
The packet count in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classDataPkts 1.3.6.1.4.1.2334.2.1.4.2.1.8
The TCP data packet count in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classReTxs 1.3.6.1.4.1.2334.2.1.4.2.1.9
The TCP retransmit packet count in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classReTxTosses 1.3.6.1.4.1.2334.2.1.4.2.1.10
The TCP tossed retransmit packet count in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classCirFails 1.3.6.1.4.1.2334.2.1.4.2.1.11
The count of CIR fails events in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classCirAllocs 1.3.6.1.4.1.2334.2.1.4.2.1.12
The count of CIR alloc events in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classEirAllocs 1.3.6.1.4.1.2334.2.1.4.2.1.13
The count of EIR alloc events in the class. This variable is obsolete and should not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classPeakTcpConns 1.3.6.1.4.1.2334.2.1.4.2.1.14
The peak number of active TCP flows in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

classTcpConnInits 1.3.6.1.4.1.2334.2.1.4.2.1.15
The count of TCP flows started in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classTcpConnExits 1.3.6.1.4.1.2334.2.1.4.2.1.16
The count of TCP flows exited in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classTcpConnRefuses 1.3.6.1.4.1.2334.2.1.4.2.1.17
The count of TCP flows exited by TCP refuse in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classTcpConnIgnores 1.3.6.1.4.1.2334.2.1.4.2.1.18
The count of TCP flows exited by being ignored in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classTcpConnAborts 1.3.6.1.4.1.2334.2.1.4.2.1.19
The count of TCP flows aborted in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classTcpConnDenies 1.3.6.1.4.1.2334.2.1.4.2.1.20
The count of TCP flows denied by CIR fail in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classTcpConnTimeouts 1.3.6.1.4.1.2334.2.1.4.2.1.21
The count of TCP flows timed out by pshaper in the class. This variable is obsolete and should not be used.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

classPeakUdpConns 1.3.6.1.4.1.2334.2.1.4.2.1.22
The peak number of active UDP flows in the class. This variable is deprecated, and should no longer be used.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Gauge  

classUdpConnInits 1.3.6.1.4.1.2334.2.1.4.2.1.23
The count of UDP flows started in the class. This variable is deprecated, and should no longer be used.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

classUdpConnExits 1.3.6.1.4.1.2334.2.1.4.2.1.24
The count of UDP flows exited in the class. This variable is deprecated, and should no longer be used.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

classHits 1.3.6.1.4.1.2334.2.1.4.2.1.25
Count of hits in the class
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classPolicyHits 1.3.6.1.4.1.2334.2.1.4.2.1.26
Count of policy hits in the class
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classRate 1.3.6.1.4.1.2334.2.1.4.2.1.27
The peak total rate in bps of the class
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

classRateAllocations 1.3.6.1.4.1.2334.2.1.4.2.1.28
The count of rate allocations on the class. This variable is obsolete and should not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

classPeakGuaranteedRateFlows 1.3.6.1.4.1.2334.2.1.4.2.1.29
The peak number of guaranteed rate flows active on the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

classPeakRateFlows 1.3.6.1.4.1.2334.2.1.4.2.1.30
The peak number of rate-based flows active on the class. This variable is obsolete and should not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

classDataDelayEvents 1.3.6.1.4.1.2334.2.1.4.2.1.31
The total number of data delay events measured for the class. ** This variable is no longer used. Consult PacketeerRTM.mib for current response-time management variables.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

classDataDelayTimeCum 1.3.6.1.4.1.2334.2.1.4.2.1.32
The cumulative data delay time in milliseconds measured for the class. classDataDelayTimeCum divided by classDataDelayEvents provides an indication of average response time for the class. (However, classDataDelayEvents MAY be zero, so you must check for that). ** This variable is no longer used. Consult PacketeerRTM.mib for current response-time management variables.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

classReservedOne 1.3.6.1.4.1.2334.2.1.4.2.1.33
This variable is for experimental use only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classReTxByteCount 1.3.6.1.4.1.2334.2.1.4.2.1.34
The count of retransmitted bytes on the class. This is the low-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classReTxByteCountHi 1.3.6.1.4.1.2334.2.1.4.2.1.35
The count of retransmitted bytes on the class. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classFullName 1.3.6.1.4.1.2334.2.1.4.2.1.36
The complete name of the class, e.g. /Inbound/Inside/HTTP. Note that the className variable gives only the last part, in this example HTTP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

classCurrentRate 1.3.6.1.4.1.2334.2.1.4.2.1.37
The current rate in bits per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

classPktExchangeTime 1.3.6.1.4.1.2334.2.1.4.2.1.38
(PacketShaper only). The packet exchange time for TCP data packets, between PacketShaper and the server side. This is the low-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classPktExchangeTimeHi 1.3.6.1.4.1.2334.2.1.4.2.1.39
(PacketShaper only). The packet exchange time for TCP data packets, between PacketShaper and the server side. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classPktExchangeTimeSamples 1.3.6.1.4.1.2334.2.1.4.2.1.40
(PacketShaper only). The total number of packet exchanges counted for the classPktExchangeTime / classPktExchangeTimeHi number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classClientFloodBlock 1.3.6.1.4.1.2334.2.1.4.2.1.41
The total number of client side SYN flood attacks blocked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classServerFloodBlock 1.3.6.1.4.1.2334.2.1.4.2.1.42
The total number of server side SYN flood attacks blocked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classAppAvailability 1.3.6.1.4.1.2334.2.1.4.2.1.43
The cumulative average application availability.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

classPeakIpdgConns 1.3.6.1.4.1.2334.2.1.4.2.1.47
The peak number of active IPDG flows in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

classWebResponse2XX 1.3.6.1.4.1.2334.2.1.4.2.1.48
The count of HTTP response messages having 2XX status codes (successful).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classWebResponse3XX 1.3.6.1.4.1.2334.2.1.4.2.1.49
The count of HTTP response messages having 3XX status codes (redirection).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classWebResponse4XX 1.3.6.1.4.1.2334.2.1.4.2.1.50
The count of HTTP response messages having 4XX status codes (client error).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classWebResponse5XX 1.3.6.1.4.1.2334.2.1.4.2.1.51
The count of HTTP response messages having 5XX status codes (server error).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classNonComprsnBytes 1.3.6.1.4.1.2334.2.1.4.2.1.52
The total number of non-compressed bytes in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classNonComprsnBytesHi 1.3.6.1.4.1.2334.2.1.4.2.1.53
The total number of non-compressed bytes in the class. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classPreComprsnBytes 1.3.6.1.4.1.2334.2.1.4.2.1.54
The total number of bytes before compression in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classPreComprsnBytesHi 1.3.6.1.4.1.2334.2.1.4.2.1.58
The total number of bytes before compression in the class. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classPostComprsnBytes 1.3.6.1.4.1.2334.2.1.4.2.1.55
The total number of bytes after compression in the class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

classPostComprsnBytesHi 1.3.6.1.4.1.2334.2.1.4.2.1.56
The total number of bytes after compression in the class. This is the high-order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmInsideLinkCount 1.3.6.1.4.1.2334.2.1.5.1
The number of MIB-II LinkDown traps sent by the agent since the last reset, where ifIndex was for the Inside link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmOutsideLinkCount 1.3.6.1.4.1.2334.2.1.5.3
The number of MIB-II LinkDown traps sent by the agent since the last reset, where ifIndex was for the Outside link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmSiteRouterCount 1.3.6.1.4.1.2334.2.1.5.5
The number of psAlarmSiteRouter traps sent by the agent since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmSiteRouterStatus 1.3.6.1.4.1.2334.2.1.5.6
Status of the site router. A status of gone(2) means that PacketShaper has stopped getting arp replies from the router. error-inside(3) means that it most recently got a reply, but from the inside. none(4) means that no site router was configured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), gone(2), error-inside(3), none(4)  

psAlarmSiteRouter 3
A psSiteRouter trap signifies that the site router attached to the device has changed to a state of less readiness. The psAlarmSiteRouterStatus variable included with this trap provides more information.
TRAP-TYPE    

psAlarmPowerSystemOne 4
A psPowerSystemOne trap signifies that the first power supply of the device has failed.
TRAP-TYPE    

psAlarmPowerSystemOneCount 1.3.6.1.4.1.2334.2.1.5.7
The number of psAlarmPowerSystemOne traps sent by the agent since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmPowerSystemOneStatus 1.3.6.1.4.1.2334.2.1.5.8
The operational status of the first power system of the device. (1) UP (2) DOWN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), not-ok(2)  

psAlarmPowerSystemTwo 5
A psSitePowerSystemTwo trap signifies that the second power supply of the device has failed.
TRAP-TYPE    

psAlarmPowerSystemTwoCount 1.3.6.1.4.1.2334.2.1.5.9
The number of psAlarmPowerSystemTwo traps sent by the agent since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmPowerSystemTwoStatus 1.3.6.1.4.1.2334.2.1.5.10
The operational status of the second power supply of the device. (1) UP (2) DOWN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), not-ok(2)  

psAlarmFanOne 6
A psFanOne trap signifies that the first fan of the device has failed.
TRAP-TYPE    

psAlarmFanOneCount 1.3.6.1.4.1.2334.2.1.5.11
The number of psAlarmFanOne traps sent by the agent since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmFanOneStatus 1.3.6.1.4.1.2334.2.1.5.12
The operational status of the first fan of the device. (0) Not existant (1) UP (2) DOWN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER non-existant(0), ok(1), not-ok(2)  

psAlarmFanTwo 7
A psAlarmFanTwo trap signifies that second fan of the device has failed.
TRAP-TYPE    

psAlarmFanTwoCount 1.3.6.1.4.1.2334.2.1.5.13
The number of psAlarmFanTwo traps sent by the agent since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmFanTwoStatus 1.3.6.1.4.1.2334.2.1.5.14
The operational status of the second fan of the device. (0) Not existant (1) UP (2) DOWN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER non-existant(0), ok(1), not-ok(2)  

psAlarmCfgFile 8
A psAlarmCfgFile trap signifies that the configuration file of the device has been corrupted, or otherwise changed to a state of less readiness. This trap is obsolete and should not be used.
TRAP-TYPE    

psAlarmCfgFileCount 1.3.6.1.4.1.2334.2.1.5.15
The number of psAlarmCfgFile traps sent by the agent since the last reset. This variable is obsolete and should not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmCfgFileStatus 1.3.6.1.4.1.2334.2.1.5.16
Whether the configuration file has been corrupted. A value of valid(1) signifies no problems, corrupted(2) that the configuration file has been corrupted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), corrupted(2)  

psAlarmMeasurementEngineCount 1.3.6.1.4.1.2334.2.1.5.17
The number of psAlarmMeasurementEngine traps sent by the agent since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmMeasurementEngineStatus 1.3.6.1.4.1.2334.2.1.5.18
The current status of the Measurement Engine. The values enumerated above correspond to those shown in the command line 'me show' command. (1) initially starting (2) starting (3) running (4) error on volume (5) disabled (6) wait to start (7) suspended (8) backing up data (9) restoring data
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initiallyStarting(1), starting(2), running(3), errorOnVolume(4), disabled(5), waitToStart(6), suspended(7), backup(8), restore(9)  

psAlarmMeasurementEngine 10
A psAlarmMeasurementEngine trap signifies that the Measurement Engine has changed to a state of less readiness, or failed on startup.
TRAP-TYPE    

psAlarmStandbyCount 1.3.6.1.4.1.2334.2.1.5.19
The number of psAlarmStandby traps sent by the agent since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmStandbyStatus 1.3.6.1.4.1.2334.2.1.5.20
Status of the standby feature. A status of not-configured(1) means that standby is not configured for this PacketShaper. active(2) means hot standby is processing traffic according to its shaping mode. passive(3) means hot standby is not processing traffic but is monitoring the active partner of the paired PacketShapers. down(4) means hot standby has declared itself ineligible for active mode due to a self-detected fault. direct(5) means standby direct is processing and copying traffic to its partner. disconnected(6) means standby direct is non-functional since it cannot reach its partner. leak(7) means the Packetshaper has detected a loop in the network and so has disabled the stanby direct functionality and is only processing traffic flowing through it. disable(8) means that the standby direct feature has been disabled and is non-functional.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-configured(1), active(2), passive(3), down(4), direct(5), disconnected(6), leak(7), disable(8)  

psAlarmStandby 11
A psAlarmStandby trap signifies that the standby status of the device has changed to a state of less readiness. The psAlarmStandbyStatus variable included with this trap provides more information.
TRAP-TYPE    

psAlarmFanThree 14
A psAlarmFanThree trap signifies that 3rd fan of the device has failed.
TRAP-TYPE    

psAlarmFanThreeCount 1.3.6.1.4.1.2334.2.1.5.21
The number of psAlarmFanThree traps sent by the agent since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmFanThreeStatus 1.3.6.1.4.1.2334.2.1.5.22
The operational status of the 3rd fan of the device. (0) Not existant (1) UP (2) DOWN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER non-existant(0), ok(1), not-ok(2)  

psAlarmFanFour 15
A psAlarmFanFour trap signifies that 4th fan of the device has failed.
TRAP-TYPE    

psAlarmFanFourCount 1.3.6.1.4.1.2334.2.1.5.23
The number of psAlarmFanFour traps sent by the agent since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psAlarmFanFourStatus 1.3.6.1.4.1.2334.2.1.5.24
The operational status of the 4th fan of the device. (0) Not existant (1) UP (2) DOWN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER non-existant(0), ok(1), not-ok(2)  

trapDestTable 1.3.6.1.4.1.2334.2.1.6.1
A list of destinations for traps emitted from this PacketShaper
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrapDestEntry

trapDestEntry 1.3.6.1.4.1.2334.2.1.6.1.1
A trap destination entry containing the IP address (and possibly other information in the future)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrapDestEntry  

trapDestIpAddr 1.3.6.1.4.1.2334.2.1.6.1.1.1
An address to which traps are sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

trapDestStatus 1.3.6.1.4.1.2334.2.1.6.1.1.2
Status of this trap destination. Setting to invalid(2) is equivalent to removing the address from the table. See also trapDestRemove for a shortcut for removal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

trapDestAdd 1.3.6.1.4.1.2334.2.1.6.2
A shortcut for adding a host to trapDestTable. If the name is not in n.n.n.n IP address form, then the agent attempts to look it up via DNS. If the operation fails with BADVALUE, try again with an IP address. The associated IP address is added to the trapDestTable if the operation succeeded. The table should be queried afterward to insure that the action took place.
Status: mandatory Access: write-only
OBJECT-TYPE    
  DisplayString  

trapDestRemove 1.3.6.1.4.1.2334.2.1.6.3
A shortcut for removing an IP address from trapDestTable. If the name is not in n.n.n.n IP address form, then the agent attempts to look it up via DNS. If the operation fails with BADVALUE, try again with an IP address. The table should be queried afterward to insure that the action took place.
Status: mandatory Access: write-only
OBJECT-TYPE    
  DisplayString  

psShapingStatusAdmin 1.3.6.1.4.1.2334.2.1.6.4
This object reflects the current configured traffic shaping status of the PacketShaper. The value of other(4) may occur in certain cases which can only be caused through the PacketShaper's user interface, and cannot be set through this variable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), bypass(3), other(4), watch(5)  

psUserEventTrapVars 1.3.6.1.4.1.2334.2.1.8.1
OBJECT IDENTIFIER    

userEventTrapName 1.3.6.1.4.1.2334.2.1.8.1.1
The name of the user event which has occurred.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

userEventTrapExpression 1.3.6.1.4.1.2334.2.1.8.1.2
The expression defining this user event.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

userEventTrapVariable 1.3.6.1.4.1.2334.2.1.8.1.3
The name of the Measurement Engine variable which is tested in this user event.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

userEventTrapElementType 1.3.6.1.4.1.2334.2.1.8.1.4
The type of element which is tested in this user event.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER link(1), class(2), partition(3)  

userEventTrapRegid 1.3.6.1.4.1.2334.2.1.8.1.5
The registration of this user event.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

userEventTrapDate 1.3.6.1.4.1.2334.2.1.8.1.6
The time the event occurred.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DateAndTime  

userEventTrapValue 1.3.6.1.4.1.2334.2.1.8.1.7
The value of userEventTrapVariable which triggered the event.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

userEventTrapTarget 1.3.6.1.4.1.2334.2.1.8.1.8
The name of the link, class, or partition, as given in userEventTrapElementType, which is the target of this event regiatration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

userEventTrapThreshold 1.3.6.1.4.1.2334.2.1.8.1.9
The threshold value which triggers this event. See the value of userEventTrapExpression for the signedness with respect to the threshold (<, >, etc.)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

userEventTrapRearm 1.3.6.1.4.1.2334.2.1.8.1.10
The rearm value which must be hit after an occurrence of this event in order to rearm it. See the value of userEventTrapExpression for the signedness with respect to the threshold (<, >, etc.)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

userEventTrapDayCount 1.3.6.1.4.1.2334.2.1.8.1.11
The number of times this event has occurred on this day (as counted from midnight to midnight, local time). If this value is greater than or equal to userEventTrapDayLimit, and that value is non-zero, then no more instances of this event will be reported until the next day.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

userEventTrapDayLimit 1.3.6.1.4.1.2334.2.1.8.1.12
The maximum number of times this event is allowed to occur per day (as counted from midnight to midnight, local time), as configured by the user. A value of zero denotes no limit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

psAlarmUserEvent 9
A psAlarmUserEvent trap signifies that a user event, which has been registered by the user, has occurred. The associated variables give more information on the event.
TRAP-TYPE    

psAgentEventTrapVars 1.3.6.1.4.1.2334.2.1.10.1
OBJECT IDENTIFIER    

agentEventTrapName 1.3.6.1.4.1.2334.2.1.10.1.1
The name of the agent instance which has fired the event.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

agentEventTrapDate 1.3.6.1.4.1.2334.2.1.10.1.2
The time the event occurred.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DateAndTime  

agentEventTrapType 1.3.6.1.4.1.2334.2.1.10.1.3
The type of event that occurred, 0 = GREEN, 1 = RED, 2 = YELLOW, 3 = BLUE.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER green(0), red(1), yellow(2), blue(3)  

agentEventTrapDescription 1.3.6.1.4.1.2334.2.1.10.1.4
A description of the event that has occurred.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

psAlarmAgentEvent 13
A psAlarmAgentEvent trap signifies that an agent event, which has been triggered by the user, has occurred. The associated variables give more information on the event.
TRAP-TYPE    

psFeatureHighAvDeviceDown 12
A psFeatureHighAvDeviceFailed trap signifies that an interface or router we are tracking has gone down. If it is an interface that went down, the bindings will show the corresponding router and the name of the interface which went down. The name will be specified as 'unknown' if we could not resolve the interface name. But if it is the router that went down, the interface name will not be specified.
TRAP-TYPE    

psFeatureHighAvDeviceDownCount 1.3.6.1.4.1.2334.2.1.9.1
The number of psFeatureHighAvDevice traps sent by the agent since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

psFeatureHighAvDeviceDownStatus 1.3.6.1.4.1.2334.2.1.9.2
The operational status of the interface of the router we are polling. (1) UP (2) DOWN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

psFeatureHighAvDeviceDownRouter 1.3.6.1.4.1.2334.2.1.9.3
The name of a router that has gone down or the name of the router whose one of the interfaces has gone down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

psFeatureHighAvDeviceDownInterface 1.3.6.1.4.1.2334.2.1.9.4
The name of the interface that has gone down. The name will be specified as 'unknown' in the cases where we could not resolve the interface name. The interface name will have a value of NULL or zero-length value if the router goes down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor