PAIRGAIN-SDSL-MIB

File: PAIRGAIN-SDSL-MIB.mib (48146 bytes)

Imported modules

SNMPv2-SMI RFC-1212 PAIRGAIN-COMMON-HD-MIB
RFC1213-MIB SNMPv2-TC

Imported symbols

Counter32 Integer32 MODULE-IDENTITY
OBJECT-TYPE NOTIFICATION-TYPE OBJECT-TYPE
pgainSDSL ifIndex DisplayString
RowStatus TruthValue

Defined Types

Byte  
INTEGER 0..255    

Short  
INTEGER 0..65535    

SdslLineProfileType  
INTEGER 0..65535    

PgSdslTimeStamp  
OCTET STRING Size(8)    

PgSdslAlarmSeverityMode  
INTEGER disable(1), enable(2), notAvailable(3)    

Sdsl15mPerformanceEntry  
SEQUENCE    
  sdsl15mHistoryId Short
  sdsl15mESNet Short
  sdsl15mUASNet Short
  sdsl15mESCust Short
  sdsl15mUASCust Short

Sdsl24hPerformanceEntry  
SEQUENCE    
  sdsl24hHistoryId Short
  sdsl24hESNet Short
  sdsl24hUASNet Short
  sdsl24hESCust Short
  sdsl24hUASCust Short

SdslCurr24hPerformanceEntry  
SEQUENCE    
  sdslCurr24hESNet Short
  sdslCurr24hUASNet Short
  sdslCurr24hESCust Short
  sdslCurr24hUASCust Short

SdslStatisticsEntry  
SEQUENCE    
  sdslTipRingReversal Byte
  sdslUpState Byte
  sdslMarginNet Byte
  sdslMarginHighNet Byte
  sdslMarginLowNet Byte
  sdslPulseAttenuationNet Byte
  sdslMarginCust Byte
  sdslMarginHighCust Byte
  sdslMarginLowCust Byte
  sdslPulseAttenuationCust Byte

SdslLineEntry  
SEQUENCE    
  sdslLineConfProfile SdslLineProfileType
  sdslLineAlarmConfProfile SdslLineProfileType

SdslAlarmEntry  
SEQUENCE    
  sdslMarginAlarmNet Byte
  sdslESAlarmNet Byte
  sdslUASAlarmNet Byte
  sdslMarginAlarmCust Byte
  sdslESAlarmCust Byte
  sdslUASAlarmCust Byte
  sdslLOSWAlarm Byte

SdslAlarmHistoryEntry  
SEQUENCE    
  sdslMarginAlarmFirst PgSdslTimeStamp
  sdslMarginAlarmLast PgSdslTimeStamp
  sdslMarginAlarmCount Short
  sdslESAlarmFirst PgSdslTimeStamp
  sdslESAlarmLast PgSdslTimeStamp
  sdslESAlarmCount Short
  sdslUASAlarmFirst PgSdslTimeStamp
  sdslUASAlarmLast PgSdslTimeStamp
  sdslUASAlarmCount Short
  sdslLOSWAlarmFirst PgSdslTimeStamp
  sdslLOSWAlarmLast PgSdslTimeStamp
  sdslLOSWAlarmCount Short

SdslLineConfProfileEntry  
SEQUENCE    
  sdslLineConfProfileIndex SdslLineProfileType
  sdslRateMode INTEGER 1..32000
  sdslRemFeatures Short
  sdslRate INTEGER 1..32000
  sdslLineConfProfileRowStatus RowStatus

SdslLineAlarmConfProfileEntry  
SEQUENCE    
  sdslLineAlarmConfProfileIndex SdslLineProfileType
  sdslLOSWAlarmSetting PgSdslAlarmSeverityMode
  sdslMarginThreshold Byte
  sdslMarginAlarmSetting PgSdslAlarmSeverityMode
  sdslESThreshold Byte
  sdslESAlarmSetting PgSdslAlarmSeverityMode
  sdslUASThreshold Byte
  sdslUASAlarmSetting PgSdslAlarmSeverityMode
  sdslLineAlarmConfProfileRowStatus RowStatus

PgSdslModGenEntry  
SEQUENCE    
  pgSdslModGenVersionNum Byte
  pgSdslModGenListNum Byte
  pgSdslModGenVendNum Byte
  pgSdslModGenFeatures Integer32
  pgSdslModGenSerialNum Short
  pgSdslModGenMfgDate Short

PgSdslModStatEntry  
SEQUENCE    
  pgSdslModEthOperStatus INTEGER
  pgSdslModEthInOctets Counter32
  pgSdslModEthInUcastPkts Counter32
  pgSdslModEthInNUcastPkts Counter32
  pgSdslModEthInDiscards Counter32
  pgSdslModEthInErrors Counter32
  pgSdslModEthOutOctets Counter32
  pgSdslModEthOutUcastPkts Counter32
  pgSdslModEthOutNUcastPkts Counter32
  pgSdslModEthOutErrors Counter32
  pgSdslModDslInOctets Counter32
  pgSdslModDslInUcastPkts Counter32
  pgSdslModDslInNUcastPkts Counter32
  pgSdslModDslInDiscards Counter32
  pgSdslModDslInErrors Counter32
  pgSdslModDslOutOctets Counter32
  pgSdslModDslOutUcastPkts Counter32
  pgSdslModDslOutNUcastPkts Counter32
  pgSdslModDslOutErrors Counter32

Defined Values

pgsdslMIB 1.3.6.1.4.1.927.1.13.1
The module defines the SDSL MIB
MODULE-IDENTITY    

sdslMibObjects 1.3.6.1.4.1.927.1.13.1.1
OBJECT IDENTIFIER    

sdsl15mPerformanceTable 1.3.6.1.4.1.927.1.13.1.1.1
This table provides the 15-minute performance history monitoring of the last 24 hours for all SDSL Errored Seconds (ES), and Unavailable Seconds (UAS).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Sdsl15mPerformanceEntry

sdsl15mPerformanceEntry 1.3.6.1.4.1.927.1.13.1.1.1.1
Entries of the SDSL 15-min performance table. All 96 entries for a 24 hour period are zeroed out and available at power up. Not all of the returned values are legitimate until the appropriate amount of time has elapsed.
Status: current Access: not-accessible
OBJECT-TYPE    
  Sdsl15mPerformanceEntry  

sdsl15mHistoryId 1.3.6.1.4.1.927.1.13.1.1.1.1.1
Identifies the history ID within the 96 15-minute performance history.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdsl15mESNet 1.3.6.1.4.1.927.1.13.1.1.1.1.2
SDSL 15-min ES count on Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdsl15mUASNet 1.3.6.1.4.1.927.1.13.1.1.1.1.3
SDSL 15-min UAS count on Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdsl15mESCust 1.3.6.1.4.1.927.1.13.1.1.1.1.4
SDSL 15-min ES count on the Customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdsl15mUASCust 1.3.6.1.4.1.927.1.13.1.1.1.1.5
SDSL 15-min UAS count on the Customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdsl24hPerformanceTable 1.3.6.1.4.1.927.1.13.1.1.2
This table provides 24-hour performance history monitoring of the last 7 days for all SDSL Errored Seconds (ES), and Unavailable Seconds (UAS). All 7 entries for the 7-day history are zeroed out and available at power up. Not all of the returned values are legitimate until the appropriate number of days has elapsed.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Sdsl24hPerformanceEntry

sdsl24hPerformanceEntry 1.3.6.1.4.1.927.1.13.1.1.2.1
Entries of the SDSL 24-hour performance table
Status: current Access: not-accessible
OBJECT-TYPE    
  Sdsl24hPerformanceEntry  

sdsl24hHistoryId 1.3.6.1.4.1.927.1.13.1.1.2.1.1
Identify the history ID within the 7 24-hour performance history.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdsl24hESNet 1.3.6.1.4.1.927.1.13.1.1.2.1.2
SDSL 24-hour ES count on the Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdsl24hUASNet 1.3.6.1.4.1.927.1.13.1.1.2.1.3
SDSL 24-hour UAS count on the Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdsl24hESCust 1.3.6.1.4.1.927.1.13.1.1.2.1.4
SDSL 24-hour ES count on the Customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdsl24hUASCust 1.3.6.1.4.1.927.1.13.1.1.2.1.5
SDSL 24-hour UAS count on the Customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdslCurr24hPerformanceTable 1.3.6.1.4.1.927.1.13.1.1.3
This table provides the current 24-hour performance history monitoring for all SDSL Errored Seconds (ES), and Unavailable Seconds (UAS).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdslCurr24hPerformanceEntry

sdslCurr24hPerformanceEntry 1.3.6.1.4.1.927.1.13.1.1.3.1
Entries of the SDSL Current 24-hour PM counts table
Status: current Access: not-accessible
OBJECT-TYPE    
  SdslCurr24hPerformanceEntry  

sdslCurr24hESNet 1.3.6.1.4.1.927.1.13.1.1.3.1.1
SDSL Current 24-hour ES count on the Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdslCurr24hUASNet 1.3.6.1.4.1.927.1.13.1.1.3.1.2
SDSL 24-hour UAS count on the Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdslCurr24hESCust 1.3.6.1.4.1.927.1.13.1.1.3.1.3
SDSL 24-hour ES count on the Customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdslCurr24hUASCust 1.3.6.1.4.1.927.1.13.1.1.3.1.4
SDSL 24-hour UAS count on the Customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdslStatisticsTable 1.3.6.1.4.1.927.1.13.1.1.4
This table lists statistics for margin, and pulse attenuation, of the SDSL loop.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdslStatisticsEntry

sdslStatisticsEntry 1.3.6.1.4.1.927.1.13.1.1.4.1
Entries of the SDSL line statistics table
Status: current Access: not-accessible
OBJECT-TYPE    
  SdslStatisticsEntry  

sdslTipRingReversal 1.3.6.1.4.1.927.1.13.1.1.4.1.1
Current TIP/RING state on the SDSL span: 0 - TIP/RING is not reversed. 1 - TIP/RING is reversed.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslUpState 1.3.6.1.4.1.927.1.13.1.1.4.1.2
Current loop state of the span: 0 - loop is up. 1 - loop is acquiring/converging. 2 - loop is signaling.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslMarginNet 1.3.6.1.4.1.927.1.13.1.1.4.1.3
Current Margin on the Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslMarginHighNet 1.3.6.1.4.1.927.1.13.1.1.4.1.4
Highest Margin on the Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslMarginLowNet 1.3.6.1.4.1.927.1.13.1.1.4.1.5
Lowest Margin on the Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslPulseAttenuationNet 1.3.6.1.4.1.927.1.13.1.1.4.1.6
Pulse Attenuation on the Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslMarginCust 1.3.6.1.4.1.927.1.13.1.1.4.1.7
Current Margin on the Customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslMarginHighCust 1.3.6.1.4.1.927.1.13.1.1.4.1.8
Highest Margin on the Customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslMarginLowCust 1.3.6.1.4.1.927.1.13.1.1.4.1.9
Lowest Margin on the Customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslPulseAttenuationCust 1.3.6.1.4.1.927.1.13.1.1.4.1.10
Pulse Attenuation on the Customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslLineTable 1.3.6.1.4.1.927.1.13.1.1.5
This table lists which Profiles (located at the AMC) are assigned to the particular SDSL Line.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdslLineEntry

sdslLineEntry 1.3.6.1.4.1.927.1.13.1.1.5.1
Entries of the SDSL line table
Status: current Access: not-accessible
OBJECT-TYPE    
  SdslLineEntry  

sdslLineConfProfile 1.3.6.1.4.1.927.1.13.1.1.5.1.1
The value of this object identifies the row in the SDSL Line Configuration Profile Table, (sdslLineConfProfileTable), which applies for this SDSL line. The Profiles are stored on the Management card. In the case which the configuration profile has not been set, the value will be set to '0'.
Status: current Access: read-write
OBJECT-TYPE    
  SdslLineProfileType  

sdslLineAlarmConfProfile 1.3.6.1.4.1.927.1.13.1.1.5.1.2
The value of this object identifies the row in the SDSL Line Alarm Configuration Profile Table, (sdslLineAlarmConfProfileTable), which applies for this SDSL line. In the case which the configuration profile has not been set, the value will be set to '0'.
Status: current Access: read-write
OBJECT-TYPE    
  SdslLineProfileType  

sdslAlarmTable 1.3.6.1.4.1.927.1.13.1.1.6
This table provides the SDSL alarms indication.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdslAlarmEntry

sdslAlarmEntry 1.3.6.1.4.1.927.1.13.1.1.6.1
Entries of the SDSL span alarm table
Status: current Access: not-accessible
OBJECT-TYPE    
  SdslAlarmEntry  

sdslMarginAlarmNet 1.3.6.1.4.1.927.1.13.1.1.6.1.1
Margin Threshold Exceeded on the Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslESAlarmNet 1.3.6.1.4.1.927.1.13.1.1.6.1.2
Errored Seconds threshold exceeded on the Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslUASAlarmNet 1.3.6.1.4.1.927.1.13.1.1.6.1.3
Unavailable Seconds threshold exceeded on the Network side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslMarginAlarmCust 1.3.6.1.4.1.927.1.13.1.1.6.1.4
Margin Threshold Exceeded on the Customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslESAlarmCust 1.3.6.1.4.1.927.1.13.1.1.6.1.5
Errored Seconds Exceeded on the Customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslUASAlarmCust 1.3.6.1.4.1.927.1.13.1.1.6.1.6
Unavailable Seconds threshold exceeded on the customer side of the span.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslLOSWAlarm 1.3.6.1.4.1.927.1.13.1.1.6.1.7
Loss of Sync Word (LOSW) occurred on the Network side of the SDSL loop.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

sdslAlarmHistoryTable 1.3.6.1.4.1.927.1.13.1.1.7
This table provides the SDSL alarms history
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdslAlarmHistoryEntry

sdslAlarmHistoryEntry 1.3.6.1.4.1.927.1.13.1.1.7.1
Entries of the SDSL Alarm History table
Status: current Access: not-accessible
OBJECT-TYPE    
  SdslAlarmHistoryEntry  

sdslMarginAlarmFirst 1.3.6.1.4.1.927.1.13.1.1.7.1.1
Date and time Margin threshold exceeded alarm first occurred
Status: current Access: read-only
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslMarginAlarmLast 1.3.6.1.4.1.927.1.13.1.1.7.1.2
Date and time Margin threshold exceeded alarm last occurred
Status: current Access: read-only
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslMarginAlarmCount 1.3.6.1.4.1.927.1.13.1.1.7.1.3
The number of times the Margin threshold exceeded alarm has occurred
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdslESAlarmFirst 1.3.6.1.4.1.927.1.13.1.1.7.1.4
Date and time Errored Seconds threshold exceeded alarm first occurred
Status: current Access: read-only
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslESAlarmLast 1.3.6.1.4.1.927.1.13.1.1.7.1.5
Date and time Errored Seconds threshold exceeded alarm last occurred
Status: current Access: read-only
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslESAlarmCount 1.3.6.1.4.1.927.1.13.1.1.7.1.6
The number of times the Errored Seconds threshold exceeded alarm has occurred
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdslUASAlarmFirst 1.3.6.1.4.1.927.1.13.1.1.7.1.7
Date and time Unavailable Seconds threshold exceeded alarm occurred
Status: current Access: read-only
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslUASAlarmLast 1.3.6.1.4.1.927.1.13.1.1.7.1.8
Date and time Unavailable Seconds threshold exceeded alarm last occurred
Status: current Access: read-only
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslUASAlarmCount 1.3.6.1.4.1.927.1.13.1.1.7.1.9
The number of times the Unavailable Seconds threshold exceeded alarm has occurred
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdslLOSWAlarmFirst 1.3.6.1.4.1.927.1.13.1.1.7.1.10
Date and time the Loss of Sync Word alarm first occurred
Status: current Access: read-only
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslLOSWAlarmLast 1.3.6.1.4.1.927.1.13.1.1.7.1.11
Date and time the Loss of Sync Word alarm last occurred
Status: current Access: read-only
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslLOSWAlarmCount 1.3.6.1.4.1.927.1.13.1.1.7.1.12
The number of times the Loss of Sync Word alarm has occurred.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

sdslLineConfProfileIndexNext 1.3.6.1.4.1.927.1.13.1.1.8
This object contains an appropriate value to be used for sdslLineConfProfileIndex when creating entries in the sdslLineConfProfileTable. The value '0' indicates that no unassigned entries are available. To obtain the sdslLineConfProfileIndexNext value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. If the implementator of this MIB has choosen not to implement 'dynamic assignment' of profiles, this object is not useful and should return noSuchName upon SNMP request.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sdslLineConfProfileTable 1.3.6.1.4.1.927.1.13.1.1.9
This table contains information on the sdsl line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the sdsl line.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdslLineConfProfileEntry

sdslLineConfProfileEntry 1.3.6.1.4.1.927.1.13.1.1.9.1
Each entry consists of a list of parameters that represents the configuration of an sdsl port. A profile is created in one step with all necessary parameter values and sdslLineProfileRowStatus set to createAndGo. This RowStatus object is also used to delete destroy profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SdslLineConfProfileEntry  

sdslLineConfProfileIndex 1.3.6.1.4.1.927.1.13.1.1.9.1.1
This object is used by the line configuration table in order to identify a row of this table
Status: current Access: not-accessible
OBJECT-TYPE    
  SdslLineProfileType  

sdslRateMode 1.3.6.1.4.1.927.1.13.1.1.9.1.2
Rate Mode defined in Rate Selective/Adaptive Specification for SDSL Products. Mode 1 - Fixed Rate (FR) - The channel shall operate at the rate set by the sdslRate parameter and supported at the remote unit either by default, manual switch setting, or Smart Manual mode on the modem. Support of the two-level signalling mechanism at the remote is known as Smart Manual mode. The remote unit is configured via a two-level signaling mechanism prior to the normal startup sequence. This mechanism allows the link rate to be controlled by the Central Office shelf. If the remote modem does not support the two-level signaling mechanism, the system will timeout and the default startup sequence will begin. Mode 2 - Rate Adaptive (RA) - NOT supported in this MIB yet. Allows the unit to evaluate the characteristics of the SDSL channel and adapt the data rate based upon user-defined performance criteria.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..32000  

sdslRemFeatures 1.3.6.1.4.1.927.1.13.1.1.9.1.3
This will variable will reflect the features supported by the remote unit (modem) which are received during the two-level signaling mechanism that occurs before the start-up sequence.
Status: current Access: read-write
OBJECT-TYPE    
  Short  

sdslRate 1.3.6.1.4.1.927.1.13.1.1.9.1.4
The desired rate for the particular SDSL span. Set at the CO using management software
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..32000  

sdslLineConfProfileRowStatus 1.3.6.1.4.1.927.1.13.1.1.9.1.5
This object is used to create a new row or modify or delete an existing row in this table. If the implementator of this MIB has choosen not to implement 'dynamic assignment' of profiles, this object is not useful and should return noSuchName upon SNMP request.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sdslLineAlarmConfProfileIndexNext 1.3.6.1.4.1.927.1.13.1.1.10
This object contains an appropriate value to be used for sdslLineAlarmConfProfileIndex when creating entries in the sdslLineAlarmConfTable. The value '0' indicates that no unassigned entries are available. To obtain the sdslLineAlarmConfProfileIndexNext value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. If the implementator of this MIB has choosen not to implement 'dynamic assignment' of profiles, this object is not useful and should return noSuchName upon SNMP request.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sdslLineAlarmConfProfileTable 1.3.6.1.4.1.927.1.13.1.1.11
This table contains information on the sdsl line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the modem for a physical line
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdslLineAlarmConfProfileEntry

sdslLineAlarmConfProfileEntry 1.3.6.1.4.1.927.1.13.1.1.11.1
Each entry consists of a list of parameters that represents the alarm configuration for one sdsl line. A profile is created in one step with all necessary parameter values and sdslLineAlarmConfProfileRowStatus set to createAndGo. This RowStatus object is also used to delete destroy profiles. Each entry is taken from the original Pairgain SDSL MIB called sdslAlarmSeverityEntry which provided: severity settings for SDSL alarms reporting and threshold settings for Errored Second(ES), Margin(MAR), Unavailable Seconds(UAS).
Status: current Access: not-accessible
OBJECT-TYPE    
  SdslLineAlarmConfProfileEntry  

sdslLineAlarmConfProfileIndex 1.3.6.1.4.1.927.1.13.1.1.11.1.1
This object is used by the line alarm configuration table in order to identify a row of this table
Status: current Access: not-accessible
OBJECT-TYPE    
  SdslLineProfileType  

sdslLOSWAlarmSetting 1.3.6.1.4.1.927.1.13.1.1.11.1.2
Sets the severity for Loss of Sync Word alarm.
Status: current Access: read-write
OBJECT-TYPE    
  PgSdslAlarmSeverityMode  

sdslMarginThreshold 1.3.6.1.4.1.927.1.13.1.1.11.1.3
Sets the SDSL Margin threshold value.
Status: current Access: read-write
OBJECT-TYPE    
  Byte  

sdslMarginAlarmSetting 1.3.6.1.4.1.927.1.13.1.1.11.1.4
Sets the severity for Margin threshold exceeded alarm.
Status: current Access: read-write
OBJECT-TYPE    
  PgSdslAlarmSeverityMode  

sdslESThreshold 1.3.6.1.4.1.927.1.13.1.1.11.1.5
Sets the SDSL Errored Seconds threshold value.
Status: current Access: read-write
OBJECT-TYPE    
  Byte  

sdslESAlarmSetting 1.3.6.1.4.1.927.1.13.1.1.11.1.6
Sets the severity for Errored Seconds threshold exceeded alarm.
Status: current Access: read-write
OBJECT-TYPE    
  PgSdslAlarmSeverityMode  

sdslUASThreshold 1.3.6.1.4.1.927.1.13.1.1.11.1.7
Sets the SDSL Unavailable Seconds threshold value.
Status: current Access: read-write
OBJECT-TYPE    
  Byte  

sdslUASAlarmSetting 1.3.6.1.4.1.927.1.13.1.1.11.1.8
Sets the severity for UAS threshold exceeded alarm.
Status: current Access: read-write
OBJECT-TYPE    
  PgSdslAlarmSeverityMode  

sdslLineAlarmConfProfileRowStatus 1.3.6.1.4.1.927.1.13.1.1.11.1.9
This object is used to create a new row or modify or delete an existing row in this table. If the implementator of this MIB has choosen not to implement 'dynamic assignment' of profiles, this object is not useful and should return noSuchName upon SNMP request.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pgSdslModGenTable 1.3.6.1.4.1.927.1.13.1.1.12
This table provides general information about the SDSL modem. pgSdslModGenVersionNum: Contains the Modem software version number pgSdslModGenListNum: When used with the vendor number the list number provides a unique model number identifier for the modem. pgSdslModGenVendNum: A unique number given to every Pairgain product. pgSdslModGenFeatures A 32 bit flag that has bits set according to feature supported by the modem. pgSdslModGenSerialNum 16 bits, used with manufacturing date to give unique identifier for the modem. pgSdslModGenMfgDate 16 bit, used with the Serial number to give a unique identifier for the modem.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PgSdslModGenEntry

pgSdslModGenEntry 1.3.6.1.4.1.927.1.13.1.1.12.1
Entries (one per port) for general modem information.
Status: current Access: not-accessible
OBJECT-TYPE    
  PgSdslModGenEntry  

pgSdslModGenVersionNum 1.3.6.1.4.1.927.1.13.1.1.12.1.1
Identifies the software version number of the modem.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

pgSdslModGenListNum 1.3.6.1.4.1.927.1.13.1.1.12.1.2
Identifies the list number of the modem.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

pgSdslModGenVendNum 1.3.6.1.4.1.927.1.13.1.1.12.1.3
Identifies the vendor number of the modem. The vendor number is a Pair Gain product unique identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Byte  

pgSdslModGenFeatures 1.3.6.1.4.1.927.1.13.1.1.12.1.4
Contains the feature bytes from the modem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pgSdslModGenSerialNum 1.3.6.1.4.1.927.1.13.1.1.12.1.5
Contains the Serial number of the modem read from the modem's NVRAM.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

pgSdslModGenMfgDate 1.3.6.1.4.1.927.1.13.1.1.12.1.6
Contains the Manufacturing date of the modem read from the modem's NVRAM.
Status: current Access: read-only
OBJECT-TYPE    
  Short  

pgSdslModStatTable 1.3.6.1.4.1.927.1.13.1.1.13
This table provides modem statistics gathered from the modem through EOC messages. These statistics correspond to a subset of those in the standard ifTable. Ethernet port statistics are given in the following objects: pgSdslModEthOperStatus: the status of the ethernet link. pgSdslModEthInOctets pgSdslModEthInUcastPkts pgSdslModEthInNUcastPkts pgSdslModEthInDiscards pgSdslModEthInErrors pgSdslModEthOutOctets pgSdslModEthOutUcastPkts pgSdslModEthOutNUcastPkts pgSdslModEthOutErrors SDSL port statistics are given in the following objects: pgSdslModDslInOctets pgSdslModDslInUcastPkts pgSdslModDslInNUcastPkts pgSdslModDslInDiscards pgSdslModDslInErrors pgSdslModDslOutOctets pgSdslModDslOutUcastPkts pgSdslModDslOutNUcastPkts pgSdslModDslOutErrors
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PgSdslModStatEntry

pgSdslModStatEntry 1.3.6.1.4.1.927.1.13.1.1.13.1
Entries (one per port) for the modem statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  PgSdslModStatEntry  

pgSdslModEthOperStatus 1.3.6.1.4.1.927.1.13.1.1.13.1.1
Identifies the status of the modem's ethernet port. Up or Down
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), unknown(4), dormant(5)  

pgSdslModEthInOctets 1.3.6.1.4.1.927.1.13.1.1.13.1.2
modem's Ethernet ifInOctet count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModEthInUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.3
modem's Ethernet ifInUcastPkts count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModEthInNUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.4
modem's Ethernet ifNUcastPkts count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModEthInDiscards 1.3.6.1.4.1.927.1.13.1.1.13.1.5
modem's Ethernet ifInDiscards count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModEthInErrors 1.3.6.1.4.1.927.1.13.1.1.13.1.6
modem's Ethernet ifInErrors count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModEthOutOctets 1.3.6.1.4.1.927.1.13.1.1.13.1.7
modem's Ethernet ifOutOctets count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModEthOutUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.8
modem's Ethernet ifOutUcastPkts count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModEthOutNUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.9
modem's Ethernet ifOutNUcastPkts count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModEthOutErrors 1.3.6.1.4.1.927.1.13.1.1.13.1.10
modem's Ethernet ifOutErrors count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModDslInOctets 1.3.6.1.4.1.927.1.13.1.1.13.1.11
modem's Dsl ifInOctets count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModDslInUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.12
modem's Dsl ifInUcastPkts count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModDslInNUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.13
modem's Dsl ifInNUcastPkts count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModDslInDiscards 1.3.6.1.4.1.927.1.13.1.1.13.1.14
modem's Dsl ifInDiscards count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModDslInErrors 1.3.6.1.4.1.927.1.13.1.1.13.1.15
modem's Dsl ifInErrors count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModDslOutOctets 1.3.6.1.4.1.927.1.13.1.1.13.1.16
modem's Dsl ifOutOctets count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModDslOutUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.17
modem's Dsl ifOutUcastPkts count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModDslOutNUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.18
modem's Dsl ifOutNUcastPkts count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pgSdslModDslOutErrors 1.3.6.1.4.1.927.1.13.1.1.13.1.19
modem's Dsl ifOutErrors count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32