PCEDP-PCC-MIB

File: PCEDP-PCC-MIB.mib (6173 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IPV6-TC
SNMPv2-CONF

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Counter32 Unsigned32 Gauge32
Integer32 IpAddress experimental
RowStatus TEXTUAL-CONVENTION TimeStamp
Ipv6Address MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP

Defined Types

PcedpPccPceDiscoveryEntry  
SEQUENCE    
  pcedpPccPceIndex Integer32
  pcedpPccPceIPv4Address IpAddress
  pcedpPccPceIPv6Address Ipv6Address
  pcedpPccPceTimeDiscovered TimeStamp
  pcedpPccPceLastUpdated TimeStamp

Defined Values

pcedpPccMIB 1.3.6.1.3.10000
This MIB module defines a collection of objects for managing Path Computation Elements (PCEs) Discovery Protocol inside a Path Computation Client (PCC) application.
MODULE-IDENTITY    

pcedpPccNotifications 1.3.6.1.3.10000.0
OBJECT IDENTIFIER    

pcedpPccMIBObjects 1.3.6.1.3.10000.1
OBJECT IDENTIFIER    

pcedpPccDiscoveryGroup 1.3.6.1.3.10000.1.1
OBJECT IDENTIFIER    

pcedpPccPceDiscoveryAdminStatus 1.3.6.1.3.10000.1.1.1
Setting this object to disabled(2) disables the discovery of PCEs. Once disabled, The discovery must be explicitly enabled to restore discovery of PCEs. Setting this object to enabled(1) enables the discovery of PCEs.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pcedpPccPceDiscoveryTable 1.3.6.1.3.10000.1.1.2
Information describing the PCEs discovered by the PCC.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PcedpPccPceDiscoveryEntry

pcedpPccPceDiscoveryEntry 1.3.6.1.3.10000.1.1.2.1
Information describing the general information of each PCE discovered by the PCC.
Status: current Access: not-accessible
OBJECT-TYPE    
  PcedpPccPceDiscoveryEntry  

pcedpPccPceIndex 1.3.6.1.3.10000.1.1.2.1.1
This object identifies locally the PCE for which this entry contains information.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

pcedpPccPceIPv4Address 1.3.6.1.3.10000.1.1.2.1.2
The IP address to be used to reach the PCE. A value of 0.0.0.0 indicates the absence of this address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pcedpPccPceIPv6Address 1.3.6.1.3.10000.1.1.2.1.3
The IP address to be used to reach the PCE. A value of ::0 indicates the absence of this address.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

pcedpPccPceTimeDiscovered 1.3.6.1.3.10000.1.1.2.1.4
The value of sysUpTime at the time this entry was created. Static entry: the value of sysUpTime at the time PCC restarted.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

pcedpPccPceLastUpdated 1.3.6.1.3.10000.1.1.2.1.5
The value of sysUpTime at the time this entry was last updated. Static entry: if the entry values keep unchanged since the re- initialization of the PCC then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

pcedpPccPcesCapabilityGroup 1.3.6.1.3.10000.1.2
OBJECT IDENTIFIER    

pcedpPccPcesActivityGroup 1.3.6.1.3.10000.1.3
OBJECT IDENTIFIER    

pcedpPccConformance 1.3.6.1.3.10000.2
OBJECT IDENTIFIER    

pcedpPccGroups 1.3.6.1.3.10000.2.1
OBJECT IDENTIFIER    

pcedpPccCompliances 1.3.6.1.3.10000.2.2
OBJECT IDENTIFIER    

pcedpPccGeneralPceInformation 1.3.6.1.3.10000.2.2.1
The compliance statement for SNMP entities that monitors only general information as proposed in the 2nd S. of the section 6.1 of [I-D.ietf-pce-discovery-reqs].
Status: current Access: read-only
MODULE-COMPLIANCE    

pcedpPccDetailledPceInformation 1.3.6.1.3.10000.2.2.2
The compliance statement for SNMP entities that implement detailled monitoring as proposed in the 3rd S. of the section 6.1 of [I-D.ietf-pce-discovery-reqs].
Status: current Access: read-only
MODULE-COMPLIANCE