PCI-HOTPLUG-MIB

File: PCI-HOTPLUG-MIB.mib (19648 bytes)

Imported modules

RFC1212-MIB RFC1215-MIB RFC1213-MIB
RFC1155-SMI

Imported symbols

OBJECT-TYPE TRAP-TYPE DisplayString
enterprises

Defined Types

SiePciHotPlugSlotEntry  
SEQUENCE    
  siePciHotPlugSlotLogicalIdentifier INTEGER
  siePciHotPlugSlotPhysicalSlotNumber INTEGER
  siePciHotPlugSlotBusNumber INTEGER
  siePciHotPlugSlotDeviceNumber INTEGER
  siePciHotPlugSlotIs64Bit INTEGER
  siePciHotPlugSlotFrequency INTEGER
  siePciHotPlugSlotState INTEGER
  siePciHotPlugSlotCardPresent INTEGER
  siePciHotPlugSlotCardLockSwitch INTEGER
  siePciHotPlugSlotCardName DisplayString
  siePciHotPlugSlotCardFrequency INTEGER
  siePciHotPlugSlotCardState INTEGER
  siePciHotPlugSlotPowerLED INTEGER
  siePciHotPlugSlotAttentionLED INTEGER

Defined Values

sni 1.3.6.1.4.1.231
OBJECT IDENTIFIER    

sniProductMibs 1.3.6.1.4.1.231.2
OBJECT IDENTIFIER    

sniExtensions 1.3.6.1.4.1.231.2.10
OBJECT IDENTIFIER    

sniServerMgmt 1.3.6.1.4.1.231.2.10.2
OBJECT IDENTIFIER    

sniInventory 1.3.6.1.4.1.231.2.10.2.1
OBJECT IDENTIFIER    

sniCommon 1.3.6.1.4.1.231.2.10.2.2
OBJECT IDENTIFIER    

sniBios 1.3.6.1.4.1.231.2.10.2.2.1
OBJECT IDENTIFIER    

sniEisa 1.3.6.1.4.1.231.2.10.2.2.2
OBJECT IDENTIFIER    

sniHd 1.3.6.1.4.1.231.2.10.2.2.3
OBJECT IDENTIFIER    

sniBus 1.3.6.1.4.1.231.2.10.2.2.4
OBJECT IDENTIFIER    

sniServerControl 1.3.6.1.4.1.231.2.10.2.2.5
OBJECT IDENTIFIER    

sieHotPlug 1.3.6.1.4.1.231.2.10.2.2.6
OBJECT IDENTIFIER    

sniPcSpecific 1.3.6.1.4.1.231.2.10.2.3
OBJECT IDENTIFIER    

sniScb 1.3.6.1.4.1.231.2.10.2.4
OBJECT IDENTIFIER    

sniOsSpecific 1.3.6.1.4.1.231.2.10.2.5
OBJECT IDENTIFIER    

sniNetware 1.3.6.1.4.1.231.2.10.2.5.1
OBJECT IDENTIFIER    

sniWinNt 1.3.6.1.4.1.231.2.10.2.5.2
OBJECT IDENTIFIER    

sniOs2 1.3.6.1.4.1.231.2.10.2.5.3
OBJECT IDENTIFIER    

sniUnix 1.3.6.1.4.1.231.2.10.2.5.4
OBJECT IDENTIFIER    

sniOemComponents 1.3.6.1.4.1.231.2.10.2.6
OBJECT IDENTIFIER    

sniOemDpt 1.3.6.1.4.1.231.2.10.2.6.1
OBJECT IDENTIFIER    

sniOemMylex 1.3.6.1.4.1.231.2.10.2.6.2
OBJECT IDENTIFIER    

sniMlxDiskArray 1.3.6.1.4.1.231.2.10.2.6.2.1
OBJECT IDENTIFIER    

sniSecurity 1.3.6.1.4.1.231.2.10.2.7
OBJECT IDENTIFIER    

sniSmSecurity 1.3.6.1.4.1.231.2.10.2.7.1
OBJECT IDENTIFIER    

sniServerView 1.3.6.1.4.1.231.2.10.2.8
OBJECT IDENTIFIER    

sniTrapMib 1.3.6.1.4.1.231.2.10.5
OBJECT IDENTIFIER    

sieHotPlugAgent 1.3.6.1.4.1.231.2.10.2.2.6.1
OBJECT IDENTIFIER    

siePciHotPlugSlot 1.3.6.1.4.1.231.2.10.2.2.6.2
OBJECT IDENTIFIER    

siePciHotPlugTrapInfo 1.3.6.1.4.1.231.2.10.2.2.6.3
OBJECT IDENTIFIER    

sieDeviceHotPlugTrapInfo 1.3.6.1.4.1.231.2.10.2.2.6.4
OBJECT IDENTIFIER    

sieHotPlugAgentVersionMajor 1.3.6.1.4.1.231.2.10.2.2.6.1.1
Major version number of the MIB
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..9  

sieHotPlugAgentVersionMinor 1.3.6.1.4.1.231.2.10.2.2.6.1.2
Minor version number of the MIB
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..99  

siePciHotPlugNumberSlots 1.3.6.1.4.1.231.2.10.2.2.6.2.1
Number of Hot Plug slots in the system; -1 if unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

siePciHotPlugSlotTable 1.3.6.1.4.1.231.2.10.2.2.6.2.2
Table that contains the Hot Plug slot entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SiePciHotPlugSlotEntry

siePciHotPlugSlotEntry 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1
Entry of PCI HotPlug Slot .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SiePciHotPlugSlotEntry  

siePciHotPlugSlotLogicalIdentifier 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.1
Logical Identifier to uniquely identify a Hot Plug slot; -1 if unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

siePciHotPlugSlotPhysicalSlotNumber 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.2
Physical Slot Number; -1 if unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

siePciHotPlugSlotBusNumber 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.3
PCI Bus Number; -1 if unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

siePciHotPlugSlotDeviceNumber 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.4
PCI Device Number; -1 if unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

siePciHotPlugSlotIs64Bit 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.5
Indicates whether the slot is a 64-bits or a 32-bits PCI slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), pci-slot64-bit(2), pci-slot32-bit(3)  

siePciHotPlugSlotFrequency 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.6
Slot frequency in MHz.It indicates at what frequency the bus for this slot is currently operating, regardless of whether there is an adapter card in the slot or not, and whether the slot is on or off; -1 if unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

siePciHotPlugSlotState 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.7
State of the Hot Plug slot: 1 - The state of the Hot Plug slot can't be determined. 2 - The slot is power ON. 3 - The slot is power OFF.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

siePciHotPlugSlotCardPresent 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.8
Adapter Card power requirements. It returns the information encoded by PRSNT[1:2]# pins, independent of whether the slot is on or off: 1 - The adapter Card power requirements can't be determined 2 - No adapter card present 3 - Adapter card present, 7.5 W maximum 4 - Adapter card present, 15 W maximum 5 - Adapter card present, 25 W maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), notPresent(2), low(3), medium(4), high(5)  

siePciHotPlugSlotCardLockSwitch 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.9
State of the Card Lock switch of the associated Hot Plug slot. The Card Lock manages the Mechanical Detect Input 0 (DETECT0# pin) : 1 - The state of the card lock switch can't be determined 2 - The adapter card is locked securely -> the power can be applied 3 - The card lock is removed The power must be powered down : - if not (case of a surprise removal) -> an emergency shutdown of the Hot Plug slot is activated -> the power will not be applied.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), cardLockSwitchOn(2), cardLockSwitchOff(3)  

siePciHotPlugSlotCardName 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.10
The name of the adapter card associated to the Hot Plug slot, regardless of the adapter card is in the slot or not, and whether the Hot Plug slot is on or off. If there is no associated adapter card, the default string 'no associated adapter card' is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

siePciHotPlugSlotCardFrequency 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.11
Adapter Card frequency capability in MHz. It indicates whether the card is capable of operating at 66 MHz,independently of whether the bus is currently operating at 33 MHz or 66 MHz and independently of whether the slot is turned off or on ; -1 if unknown .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

siePciHotPlugSlotCardState 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.12
State of the adapter card associated to the Hot Plug slot : 1 - the state of adapter card can't be determined, or is none of the following: 2 - The adapter card is powered and operational 3 - The Hot Plug slot is power down and isolated from the PCI-bus -> the adapter card can safely be removed 4 - The adapter card is removed 5 - The adapter card is quiesced, but the Hot Plug slot is still power on 6 - The adapter card is powered but not operational 7 - A slot power fault has been detected while turning on the Hot Plug slot 8 - The adapter card is non Hot Pluggable 9 - There is no associated adapter card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), safeToRemove(3), removed(4), quiesced(5), notReady(6), powerFault(7), nonHotPluggable(8), noAssociatedCard(9)  

siePciHotPlugSlotPowerLED 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.13
State of the Power (green) LED : 1 - The state of the Power LED can't be determined 2 - ON : the power of the associated slot is switched ON and OK 3 - OFF : the power of the associated slot is switched OFF.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

siePciHotPlugSlotAttentionLED 1.3.6.1.4.1.231.2.10.2.2.6.2.2.1.14
State of the Attention (yellow) LED : 1 - The state of the Attention LED can't be determined 2 - ON : The adapter card inserted into the associated slot needs attention 3 - OFF : The adapter card inserted into the associated slot is operational.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

siePciHotPlugTrapServerName 1.3.6.1.4.1.231.2.10.2.2.6.3.1
Name of server the trap occured
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

siePciHotPlugTrapPhysicalSlotNumber 1.3.6.1.4.1.231.2.10.2.2.6.3.2
Physical Slot Number for which a Hot Plug Trap is generated.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

siePciHotPlugTrapResult 1.3.6.1.4.1.231.2.10.2.2.6.3.3
The result of the HotPlug action: - successfull - unsuccessfull.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

siePciHotPlugTrapCardState 1.3.6.1.4.1.231.2.10.2.2.6.3.4
State of the adapter card associated to the Hot Plug action : - OK - Safe to remove - Removed - Quiesced - Not Ready - Power Fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

sieDeviceHotPlugTrapServerName 1.3.6.1.4.1.231.2.10.2.2.6.4.1
Name of server the trap occured
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

sieDeviceHotPlugTrapDeviceName 1.3.6.1.4.1.231.2.10.2.2.6.4.2
The name of the SCSI device for which a Hot Plug Trap is generated.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

sieDeviceHotPlugTrapAdapterName 1.3.6.1.4.1.231.2.10.2.2.6.4.3
The name of the SCSI adapter where the SCSI device, generating this trap, is connected.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

sieDeviceHotPlugTrapPCIBusNumber 1.3.6.1.4.1.231.2.10.2.2.6.4.4
PCI Bus Number of the SCSI adapter where the SCSI device, generating this trap, is connected.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

sieDeviceHotPlugTrapDeviceNumber 1.3.6.1.4.1.231.2.10.2.2.6.4.5
Device Number of the SCSI adapter where the SCSI device, generating this trap, is connected.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

siePciHotPlugTrapHotRemoval 1000
A Hot Removal action has been started.
TRAP-TYPE    

siePciHotPlugTrapHotReplace 1001
A Hot Replace action has been started.
TRAP-TYPE    

siePciHotPlugTrapEndHotPlugAction 1002
The HotPlug action for the physical slot number held in siePciHotPlugTrapPhysicalSlotNumber object is finished.
TRAP-TYPE    

sieDeviceHotPlugTrapHotRemoval 1020
A SCSI device has been removed.
TRAP-TYPE    

sieDeviceHotPlugTrapHotReplace 1021
A SCSI device has been replaced.
TRAP-TYPE    

sieDeviceHotPlugTrapHotAdd 1022
A SCSI device has been added.
TRAP-TYPE