PDN-MPD-EXT-MIB
File:
PDN-MPD-EXT-MIB.mib (4317 bytes)
Imported modules
Imported symbols
Defined Types
PdnMpdExtSecurityMode |
|
A set of combinations of Model and SecurityLevel
that can be supported by an agent. An agent can
support more than a single combination at once.
Bit 0 : None.
- SNMP access is not allowed.
Bit 1 : SNMPv1, noAuthNoPriv.
- SNMPv1 access is allowed with
- no auth and no privacy.
- Only Security checking based on
community names is performed.
Bit 2 : SNMPv2c, no AuthNoPriv.
- SNMPv2c access is allowed with
- no auth and no privacy.
- Only Security checking based on
community names is performed.
Bit 3 : SNMPv3, noAuthNoPriv.
- SNMPv3 access is allowed with
- no auth and no privacy.
Bit 4 : SNMPv3, AuthNoPriv.
- SNMPv3 access is allowed with
- authentication and no privacy.
Bit 5 : SNMPv3, AuthPriv.
- SNMPv3 access is allowed with
- authentication and privacy.
|
TEXTUAL-CONVENTION |
|
|
|
|
BITS |
none(0), snmpv1NoAuthNoPriv(1), snmpv2cNoAuthNoPriv(2), snmpv3NoAuthNoPriv(3), snmpv3AuthNoPriv(4), snmpv3AuthPriv(5) |
|
Defined Values
pdnMpdExtMIB |
1.3.6.1.4.1.1795.2.24.2.44.1 |
This management information module supports the objects
that extend the Message Processing Dispatcher mib as
described in rfc3412_std62_a.mib. |
MODULE-IDENTITY |
|
|
|
pdnMpdExtSecurityModeConfig |
1.3.6.1.4.1.1795.2.24.2.44.1.1.1 |
This object is used to configure the level of SNMP
access that the agent supports. That is, which
combinations of Model Processing can be dispatched
and what security levels are supported for those models.
An agent can choose to support more than a single
combination of modes, (e.g., SNMPv1 and SNMPv2 with
noAuthNoPriv) or choose to support a single option
(e.g., a very secured agent with only SNMPv3 with
authentication and privacy enabled.). Even some of
these combinations may not be supported at all.
Setting this object to a valid value will cause
the entries associated with those Models and
SecurityLevels being changed to become active/inactive
in tables processed by the SNMPv3 Framework.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
PdnMpdExtSecurityMode |
|
|
pdnMpdExtCompliance |
1.3.6.1.4.1.1795.2.24.2.44.1.2.1.1 |
The compliance statement for MPD extension mib. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
pdnMpdExtGroup |
1.3.6.1.4.1.1795.2.24.2.44.1.2.2.1 |
A collection of configuration objects applicable
to MPD extention. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|