PMA-MIB
File:
PMA-MIB.mib (90716 bytes)
Imported modules
Imported symbols
Defined Types
IbPmaPortCntrsEntry |
|
SEQUENCE |
|
|
|
|
ibPmaPortCntrsIndex |
IbDataPort |
|
|
ibPmaSymbolErrCounter |
Unsigned32 |
|
|
ibPmaLinkErrRecoveryCntr |
Unsigned32 |
|
|
ibPmaLinkDownedCntr |
Unsigned32 |
|
|
ibPmaPortRcvErr |
Unsigned32 |
|
|
ibPmaPortRcvRemPhysErr |
Unsigned32 |
|
|
ibPmaPortRcvSwitchRelayErr |
Unsigned32 |
|
|
ibPmaPortXmitDiscard |
Unsigned32 |
|
|
ibPmaPortXmitConstraintErr |
Unsigned32 |
|
|
ibPmaPortRcvConstraintErr |
Unsigned32 |
|
|
ibPmaLocalLinkIntegrityErr |
Unsigned32 |
|
|
ibPmaExcessBufOverrunErr |
Unsigned32 |
|
|
ibPmaVl15Dropped |
Unsigned32 |
|
IbPmaPortCntrsOptEntry |
|
SEQUENCE |
|
|
|
|
ibPmaPortCntrsOptIndex |
IbDataPort |
|
|
ibPmaPortXmitData |
Unsigned32 |
|
|
ibPmaPortRcvData |
Unsigned32 |
|
|
ibPmaPortXmitPkts |
Unsigned32 |
|
|
ibPmaPortRcvPkts |
Unsigned32 |
|
IbPmaPortRcvErrEntry |
|
SEQUENCE |
|
|
|
|
ibPmaPortRcvErrIndex |
IbDataPort |
|
|
ibPmaPortRcvErrLocalPhysErrs |
Unsigned32 |
|
|
ibPmaPortMalformedPacketErrs |
Unsigned32 |
|
|
ibPmaPortBufferOverrunErrs |
Unsigned32 |
|
|
ibPmaPortDLIDMappingErrs |
Unsigned32 |
|
|
ibPmaPortVLMappingErrs |
Unsigned32 |
|
|
ibPmaPortLoopingErrs |
Unsigned32 |
|
IbPmaPortXmitDiscardEntry |
|
SEQUENCE |
|
|
|
|
ibPmaPortXmitDiscardIndex |
IbDataPort |
|
|
ibPmaPortInactiveDiscards |
Unsigned32 |
|
|
ibPmaPortNeighborMtuDiscards |
Unsigned32 |
|
|
ibPmaPortSwLifetimeLimitDiscards |
Unsigned32 |
|
|
ibPmaPortSwHoqLimitDiscards |
Unsigned32 |
|
IbPmaPortFlowCtlCntrsEntry |
|
SEQUENCE |
|
|
|
|
ibPmaPortFlowCtlCntrsIndex |
IbDataPort |
|
|
ibPmaPortFlowCtlXmitFlowPkts |
Unsigned32 |
|
|
ibPmaPortFlowCtlRcvFlowPkts |
Unsigned32 |
|
IbPmaPortOpCodeRcvCntrsEntry |
|
SEQUENCE |
|
|
|
|
ibPmaPortOpCodeRcvCntrsPortIndex |
IbDataPort |
|
|
ibPmaPortOpCodeRcvCntrsIndex |
Unsigned32 |
|
|
ibPmaPortOpCodeRcvCntrsRcvPkts |
Counter32 |
|
|
ibPmaPortOpCodeRcvCntrsRcvData |
Counter32 |
|
IbPmaPortOpCodeVlCntrsEntry |
|
SEQUENCE |
|
|
|
|
ibPmaPortOpCodeVlCntrsPortIndex |
IbDataPort |
|
|
ibPmaPortOpCodeVlCntrsIndex |
Unsigned32 |
|
|
ibPmaPortVlOpPkt0 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt1 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt2 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt3 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt4 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt5 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt6 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt7 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt8 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt9 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt10 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt11 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt12 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt13 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt14 |
Unsigned32 |
|
|
ibPmaPortVlOpPkt15 |
Unsigned32 |
|
IbPmaPortOpCodeVlDataCntrsEntry |
|
SEQUENCE |
|
|
|
|
ibPmaPortOpCodeVlDataPortIndex |
IbDataPort |
|
|
ibPmaPortOpCodeVlDataIndex |
Unsigned32 |
|
|
ibPmaPortVlOpData0 |
Counter32 |
|
|
ibPmaPortVlOpData1 |
Counter32 |
|
|
ibPmaPortVlOpData2 |
Counter32 |
|
|
ibPmaPortVlOpData3 |
Counter32 |
|
|
ibPmaPortVlOpData4 |
Counter32 |
|
|
ibPmaPortVlOpData5 |
Counter32 |
|
|
ibPmaPortVlOpData6 |
Counter32 |
|
|
ibPmaPortVlOpData7 |
Counter32 |
|
|
ibPmaPortVlOpData8 |
Counter32 |
|
|
ibPmaPortVlOpData9 |
Counter32 |
|
|
ibPmaPortVlOpData10 |
Counter32 |
|
|
ibPmaPortVlOpData11 |
Counter32 |
|
|
ibPmaPortVlOpData12 |
Counter32 |
|
|
ibPmaPortVlOpData13 |
Counter32 |
|
|
ibPmaPortVlOpData14 |
Counter32 |
|
|
ibPmaPortVlOpData15 |
Counter32 |
|
IbPmaPortVlXmitFCUpErrEntry |
|
SEQUENCE |
|
|
|
|
ibPmaPortVlXmitFCUpErrPortIndex |
IbDataPort |
|
|
ibPmaPortVlXmitFCUpErr0 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr1 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr2 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr3 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr4 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr5 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr6 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr7 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr8 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr9 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr10 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr11 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr12 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr13 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr14 |
Unsigned32 |
|
|
ibPmaPortVlXmitFCUpErr15 |
Unsigned32 |
|
IbPmaPortVlXmitWaitCntrsEntry |
|
SEQUENCE |
|
|
|
|
ibPmaPortVlXmitWaitCntrsIndex |
IbDataPort |
|
|
ibPmaPortVlXmitWait0 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait1 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait2 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait3 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait4 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait5 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait6 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait7 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait8 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait9 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait10 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait11 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait12 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait13 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait14 |
Unsigned32 |
|
|
ibPmaPortVlXmitWait15 |
Unsigned32 |
|
IbPmaPortVlSwCongestionEntry |
|
SEQUENCE |
|
|
|
|
ibPmaPortVlSwCongestionIndex |
IbDataPort |
|
|
ibPmaPortVlSwCongestion0 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion1 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion2 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion3 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion4 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion5 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion6 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion7 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion8 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion9 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion10 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion11 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion12 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion13 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion14 |
Unsigned32 |
|
|
ibPmaPortVlSwCongestion15 |
Unsigned32 |
|
Defined Values
ibPmaMIB |
1.3.6.1.3.117.6 |
Copyright (C) The Internet Society (2005). The initial
version of this MIB module was published in RFC XXXX; for
full legal notices see the RFC itself. Supplementary
information may be available on
http://www.ietf.org/copyrights/ianamib.html.
This module contains managed object definitions for
the Performance Management Agent instrumentation for an
InfiniBand Performance Management Agent (PMA). |
MODULE-IDENTITY |
|
|
|
ibPmaPortCntrsEntry |
1.3.6.1.3.117.6.1.1.1.1 |
A conceptual row of the ibPmaPortCntrsTable containing
information about the basic performance and exception
statistics for a particular data port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbPmaPortCntrsEntry |
|
|
ibPmaPortCntrsIndex |
1.3.6.1.3.117.6.1.1.1.1.1 |
Index that identifies the InfiniBand data port. The IBA
defines a range of valid data ports from 1 to N, where
N can have a maximum value of 254. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbDataPort |
|
|
ibPmaSymbolErrCounter |
1.3.6.1.3.117.6.1.1.1.1.2 |
Total number of symbol errors detected on one or more
physical lanes. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaLinkErrRecoveryCntr |
1.3.6.1.3.117.6.1.1.1.1.3 |
Total number of times the Port Training state machine has
successfully completed the link error recovery process. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaLinkDownedCntr |
1.3.6.1.3.117.6.1.1.1.1.4 |
Total number of times the Port Training state machine has
failed the link error recovery process and downed the link. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortRcvErr |
1.3.6.1.3.117.6.1.1.1.1.5 |
Total number of packets containing an error that were
received on the port. These errors include:
- Local physical errors (ICRC, VCRC, FCCRC, and all physical
errors that cause entry into the BAD PACKET of BAD PACKET
DISCARD states of the packet receiver state machine)
- Malformed data packet errors (LVer, length, VL)
- Malformed link packet errors (operand, length, VL)
- Packets discarded due to buffer overrun. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortRcvRemPhysErr |
1.3.6.1.3.117.6.1.1.1.1.6 |
Total number of packets marked with the End-of-Bad-Packets (EBP)
delimeter received on the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortRcvSwitchRelayErr |
1.3.6.1.3.117.6.1.1.1.1.7 |
Total number of packets received on the port that are
discarded because they could not be forwarded by the
switch relay. Reasons for this include:
- DLID mapping
- VL mapping
- looping (output port = input port) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortXmitDiscard |
1.3.6.1.3.117.6.1.1.1.1.8 |
Total number of outbound packets discarded by the port because
the port is down or congested. Reasons for this include:
- output port is in the inactive state
- packet length exceeded neighbor MTU
- switch lifetime limit exceeded
- switch HOQ limit exceeded
May also include packets discarded while in VLStalled state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortXmitConstraintErr |
1.3.6.1.3.117.6.1.1.1.1.9 |
Total number of packets not transmitted from the port
for the following reasons:
- FilterRawOutbound is true and packet is raw
- PartitionEnforcementOutbound is true and packet fails
partition key check or IP version check. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortRcvConstraintErr |
1.3.6.1.3.117.6.1.1.1.1.10 |
Total number of packets received on the port that are
discarded for the following reasons:
- FilterRawInbound is true and packet is raw
- PartitionEnforcementInbound is true and packet fails
partition key check or IP version check. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaLocalLinkIntegrityErr |
1.3.6.1.3.117.6.1.1.1.1.11 |
The number of times that the count of packets containing
local physical errors exceeded the local physical errors
threshold. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..15 |
|
ibPmaExcessBufOverrunErr |
1.3.6.1.3.117.6.1.1.1.1.12 |
The number of times that overrun errors consecutive flow
control update periods occurred with at least one overrun
error in each period. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..15 |
|
ibPmaVl15Dropped |
1.3.6.1.3.117.6.1.1.1.1.13 |
Number of incoming VL 15 packets dropped due to resource
limitations on port due to lack of buffers. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortCntrsOptEntry |
1.3.6.1.3.117.6.1.1.2.1 |
A conceptual row of the ibPmaPortCntrsOptTable containing
information about the optional performance and exception
statistics for a particular data port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbPmaPortCntrsOptEntry |
|
|
ibPmaPortCntrsOptIndex |
1.3.6.1.3.117.6.1.1.2.1.1 |
Index that identifies the InfiniBand data port. The IBA
defines a range of valid data ports from 1 to N, where
N can have a maximum value of 254. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbDataPort |
|
|
ibPmaPortXmitData |
1.3.6.1.3.117.6.1.1.2.1.2 |
Total number of data octets divided by 4, transmitted on
all VLs from the port. This includes all octets between (and
not including) the start of packet delimeter and the VCRC. It
excludes all link packets but may include packets containing
errors. NOTE: This counter is optional and should have a 0
value if not implemented. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortRcvData |
1.3.6.1.3.117.6.1.1.2.1.3 |
Total number of data octets divided by 4, received on
all VLs from the port. This includes all octets between (and
not including) the start of packet delimeter and the VCRC. It
excludes all link packets but may include packets containing
errors. NOTE: This counter is optional and should have a 0
value if not implemented. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortXmitPkts |
1.3.6.1.3.117.6.1.1.2.1.4 |
Total number of packets, excluding link packets, transmitted on
all VLs from the port. It may include packets with errors.
NOTE: This counter is optional and should have a 0 value if
not implemented. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortRcvPkts |
1.3.6.1.3.117.6.1.1.2.1.5 |
Total number of packets, including packets containing errors
and excluding link packets, received on all VLs on this port.
It may include packets with errors. NOTE: This counter is
optional and should have a 0 value if not implemented. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortRcvErrEntry |
1.3.6.1.3.117.6.1.2.1.1 |
A conceptual row of the ibPmaPortRcvErrTable containing
information about the receive error statistics for a
particular data port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbPmaPortRcvErrEntry |
|
|
ibPmaPortRcvErrIndex |
1.3.6.1.3.117.6.1.2.1.1.1 |
Index that identifies the InfiniBand data port. The IBA
defines a range of valid data ports from 1 to N, where
N can have a maximum value of 254. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbDataPort |
|
|
ibPmaPortRcvErrLocalPhysErrs |
1.3.6.1.3.117.6.1.2.1.1.2 |
Total number of packets received on the port that contain local
physical errors (ICRC, VCRC, FCCRC, and all physical errors that
cause entry into the BAD PACKET or BAD PACKET DISCARD states of
the packet receiver state machine). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortBufferOverrunErrs |
1.3.6.1.3.117.6.1.2.1.1.4 |
Total number of packets received on the port that were
discarded due to buffer overrun. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortDLIDMappingErrs |
1.3.6.1.3.117.6.1.2.1.1.5 |
Total number of packets received on the port that were
discarded because they could not be forwarded by the switch
relay due to DLID mapping errors. This only applies to
switches. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVLMappingErrs |
1.3.6.1.3.117.6.1.2.1.1.6 |
Total number of packets received on the port that were
discarded because they could not be forwarded by the switch
relay due to VL mapping errors. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortLoopingErrs |
1.3.6.1.3.117.6.1.2.1.1.7 |
Total number of packets received on the port that were
discarded because they could not be forwarded by the switch
relay due to looping errors (where the output port =
the input port). This only applies to switches. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortXmitDiscardEntry |
1.3.6.1.3.117.6.1.2.2.1 |
A conceptual row of the ibPmaPortXmitDiscardTable containing
information about the transmit discard details for a
particular data port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbPmaPortXmitDiscardEntry |
|
|
ibPmaPortXmitDiscardIndex |
1.3.6.1.3.117.6.1.2.2.1.1 |
Index that identifies the InfiniBand data port. The IBA
defines a range of valid data ports from 1 to N, where
N can have a maximum value of 254. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbDataPort |
|
|
ibPmaPortInactiveDiscards |
1.3.6.1.3.117.6.1.2.2.1.2 |
Total number of outbound packets discarded by the port because
it is in the inactive state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortNeighborMtuDiscards |
1.3.6.1.3.117.6.1.2.2.1.3 |
Total number of outbound packets discarded by the port because
packet length exceeded the neighbor MTU. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortSwLifetimeLimitDiscards |
1.3.6.1.3.117.6.1.2.2.1.4 |
Total number of outbound packets discarded by the port because
the switch lifetime limit was exceeded. (This value is only
relevant for switches; otherwise the value should be 0). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortSwHoqLimitDiscards |
1.3.6.1.3.117.6.1.2.2.1.5 |
Total number of outbound packets discarded by the port because
the switch HOQ lifetime was exceeded. (This object applies to
switches only. For other InfiniBand entities this should have
a value of 0). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortFlowCtlCntrsEntry |
1.3.6.1.3.117.6.1.2.3.1 |
A conceptual row of the ibPmaPortFLowCtlCntrsTable containing
information about the flow control statistics for a particular
data port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbPmaPortFlowCtlCntrsEntry |
|
|
ibPmaPortFlowCtlCntrsIndex |
1.3.6.1.3.117.6.1.2.3.1.1 |
Index that identifies the InfiniBand data port. The IBA
defines a range of valid data ports from 1 to N, where
N can have a maximum value of 254. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbDataPort |
|
|
ibPmaPortOpCodeRcvCntrsEntry |
1.3.6.1.3.117.6.1.3.1.1 |
A conceptual row of the ibPmaPortOpCodeRcvCntrsTable containing
information about the receive counters per op code for a
particular data port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbPmaPortOpCodeRcvCntrsEntry |
|
|
ibPmaPortOpCodeRcvCntrsPortIndex |
1.3.6.1.3.117.6.1.3.1.1.1 |
Index that identifies the InfiniBand data port. The IBA
defines a range of valid data ports from 1 to N, where
N can have a maximum value of 254. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbDataPort |
|
|
ibPmaPortOpCodeRcvCntrsIndex |
1.3.6.1.3.117.6.1.3.1.1.2 |
The op code for which this statistic is being reported.
Note: this is a 1-based value. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..255 |
|
ibPmaPortOpCodeRcvCntrsRcvData |
1.3.6.1.3.117.6.1.3.1.1.4 |
Total number of data octets (divided by 4) received without
error for all VLs on this port for this op code. This includes
all octets between the start of packet delimeter and the VCRC,
exclusive. It excludes all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortOpCodeVlCntrsEntry |
1.3.6.1.3.117.6.1.3.2.1 |
A conceptual row of the ibPmaPortOpCodeVlCntrsTable containing
information about the virtual lane statistics for a particular
data port based on op code. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbPmaPortOpCodeVlCntrsEntry |
|
|
ibPmaPortOpCodeVlCntrsPortIndex |
1.3.6.1.3.117.6.1.3.2.1.1 |
Index that identifies the InfiniBand data port. The IBA
defines a range of valid data ports from 1 to N, where
N can have a maximum value of 254. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbDataPort |
|
|
ibPmaPortOpCodeVlCntrsIndex |
1.3.6.1.3.117.6.1.3.2.1.2 |
The op code for which this statistic is being reported.
Note: this is a 1-based value. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..255 |
|
ibPmaPortVlOpPkt0 |
1.3.6.1.3.117.6.1.3.2.1.3 |
Total number of packets received without error on the port
using this op code for Virtual Lane 0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt1 |
1.3.6.1.3.117.6.1.3.2.1.4 |
Total number of packets received without error on the port
using this op code for Virtual Lane 1. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt2 |
1.3.6.1.3.117.6.1.3.2.1.5 |
Total number of packets received without error on the port
using this op code for Virtual Lane 2. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt3 |
1.3.6.1.3.117.6.1.3.2.1.6 |
Total number of packets received without error on the port
using this op code for Virtual Lane 3. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt4 |
1.3.6.1.3.117.6.1.3.2.1.7 |
Total number of packets received without error on the port
using this op code for Virtual Lane 4. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt5 |
1.3.6.1.3.117.6.1.3.2.1.8 |
Total number of packets received without error on the port
using this op code for Virtual Lane 5. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt6 |
1.3.6.1.3.117.6.1.3.2.1.9 |
Total number of packets received without error on the port
using this op code for Virtual Lane 6. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt7 |
1.3.6.1.3.117.6.1.3.2.1.10 |
Total number of packets received without error on the port
using this op code for Virtual Lane 7. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt8 |
1.3.6.1.3.117.6.1.3.2.1.11 |
Total number of packets received without error on the port
using this op code for Virtual Lane 8. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt9 |
1.3.6.1.3.117.6.1.3.2.1.12 |
Total number of packets received without error on the port
using this op code for Virtual Lane 9. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt10 |
1.3.6.1.3.117.6.1.3.2.1.13 |
Total number of packets received without error on the port
using this op code for Virtual Lane 10. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt11 |
1.3.6.1.3.117.6.1.3.2.1.14 |
Total number of packets received without error on the port
using this op code for Virtual Lane 11. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt12 |
1.3.6.1.3.117.6.1.3.2.1.15 |
Total number of packets received without error on the port
using this op code for Virtual Lane 12. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt13 |
1.3.6.1.3.117.6.1.3.2.1.16 |
Total number of packets received without error on the port
using this op code for Virtual Lane 13. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt14 |
1.3.6.1.3.117.6.1.3.2.1.17 |
Total number of packets received without error on the port
using this op code for Virtual Lane 14. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortVlOpPkt15 |
1.3.6.1.3.117.6.1.3.2.1.18 |
Total number of packets received without error on the port
using this op code for Virtual Lane 15. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
ibPmaPortOpCodeVlDataCntrsEntry |
1.3.6.1.3.117.6.1.3.3.1 |
A conceptual row of the ibPmaPortCntrsTable containing
information about the basic performance and exception
statistics for a particular data port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbPmaPortOpCodeVlDataCntrsEntry |
|
|
ibPmaPortOpCodeVlDataPortIndex |
1.3.6.1.3.117.6.1.3.3.1.1 |
Index that identifies the InfiniBand data port. The IBA
defines a range of valid data ports from 1 to N, where
N can have a maximum value of 254. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbDataPort |
|
|
ibPmaPortOpCodeVlDataIndex |
1.3.6.1.3.117.6.1.3.3.1.2 |
The op code for which this statistic is being reported.
Note: this is a 1-based value. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..255 |
|
ibPmaPortVlOpData0 |
1.3.6.1.3.117.6.1.3.3.1.3 |
Total number of data octets (divided by 4) that were received on
VL 0 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData1 |
1.3.6.1.3.117.6.1.3.3.1.4 |
Total number of data octets (divided by 4) that were received on
VL 1 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData2 |
1.3.6.1.3.117.6.1.3.3.1.5 |
Total number of data octets (divided by 4) that were received on
VL 2 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData3 |
1.3.6.1.3.117.6.1.3.3.1.6 |
Total number of data octets (divided by 4) that were received on
VL 3 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData4 |
1.3.6.1.3.117.6.1.3.3.1.7 |
Total number of data octets (divided by 4) that were received on
VL 4 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData5 |
1.3.6.1.3.117.6.1.3.3.1.8 |
Total number of data octets (divided by 4) that were received on
VL 5 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData6 |
1.3.6.1.3.117.6.1.3.3.1.9 |
Total number of data octets (divided by 4) that were received on
VL 6 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData7 |
1.3.6.1.3.117.6.1.3.3.1.10 |
Total number of data octets (divided by 4) that were received on
VL 7 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData8 |
1.3.6.1.3.117.6.1.3.3.1.11 |
Total number of data octets (divided by 4) that were received on
VL 8 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData9 |
1.3.6.1.3.117.6.1.3.3.1.12 |
Total number of data octets (divided by 4) that were received on
VL 9 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData10 |
1.3.6.1.3.117.6.1.3.3.1.13 |
Total number of data octets (divided by 4) that were received on
VL 10 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData11 |
1.3.6.1.3.117.6.1.3.3.1.14 |
Total number of data octets (divided by 4) that were received on
VL 11 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData12 |
1.3.6.1.3.117.6.1.3.3.1.15 |
Total number of data octets (divided by 4) that were received on
VL 12 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData13 |
1.3.6.1.3.117.6.1.3.3.1.16 |
Total number of data octets (divided by 4) that were received on
VL 13 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData14 |
1.3.6.1.3.117.6.1.3.3.1.17 |
Total number of data octets (divided by 4) that were received on
VL 14 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlOpData15 |
1.3.6.1.3.117.6.1.3.3.1.18 |
Total number of data octets (divided by 4) that were received on
VL 15 for this port and op code. This count includes all octets
between the start of the packet and VCRC, exclusive. It excludes
all link packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
ibPmaPortVlXmitFCUpErrEntry |
1.3.6.1.3.117.6.1.4.1.1 |
A conceptual row of the ibPmaPortVlXmitFCUpErrTable containing
information about the transmit flow control error
statistics for the virtual lanes on a particular data port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbPmaPortVlXmitFCUpErrEntry |
|
|
ibPmaPortVlXmitFCUpErrPortIndex |
1.3.6.1.3.117.6.1.4.1.1.1 |
Index that identifies the InfiniBand data port. The IBA
defines a range of valid data ports from 1 to N, where
N can have a maximum value of 254. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbDataPort |
|
|
ibPmaPortVlXmitFCUpErr0 |
1.3.6.1.3.117.6.1.4.1.1.2 |
Total number of flow control update errors on VL 0 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr1 |
1.3.6.1.3.117.6.1.4.1.1.3 |
Total number of flow control update errors on VL 1 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr2 |
1.3.6.1.3.117.6.1.4.1.1.4 |
Total number of flow control update errors on VL 2 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr3 |
1.3.6.1.3.117.6.1.4.1.1.5 |
Total number of flow control update errors on VL 3 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr4 |
1.3.6.1.3.117.6.1.4.1.1.6 |
Total number of flow control update errors on VL 4 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr5 |
1.3.6.1.3.117.6.1.4.1.1.7 |
Total number of flow control update errors on VL 5 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr6 |
1.3.6.1.3.117.6.1.4.1.1.8 |
Total number of flow control update errors on VL 6 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr7 |
1.3.6.1.3.117.6.1.4.1.1.9 |
Total number of flow control update errors on VL 7 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr8 |
1.3.6.1.3.117.6.1.4.1.1.10 |
Total number of flow control update errors on VL 8 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr9 |
1.3.6.1.3.117.6.1.4.1.1.11 |
Total number of flow control update errors on VL 9 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr10 |
1.3.6.1.3.117.6.1.4.1.1.12 |
Total number of flow control update errors on VL 10 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr11 |
1.3.6.1.3.117.6.1.4.1.1.13 |
Total number of flow control update errors on VL 11 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr12 |
1.3.6.1.3.117.6.1.4.1.1.14 |
Total number of flow control update errors on VL 12 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr13 |
1.3.6.1.3.117.6.1.4.1.1.15 |
Total number of flow control update errors on VL 13 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr14 |
1.3.6.1.3.117.6.1.4.1.1.16 |
Total number of flow control update errors on VL 14 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitFCUpErr15 |
1.3.6.1.3.117.6.1.4.1.1.17 |
Total number of flow control update errors on VL 15 for
this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWaitCntrsEntry |
1.3.6.1.3.117.6.1.4.2.1 |
A conceptual row of the ibPmaPortVlXmitWaitCntrsTable
containing information about the transmit wait counters for
a virtual lane for a particular data port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbPmaPortVlXmitWaitCntrsEntry |
|
|
ibPmaPortVlXmitWaitCntrsIndex |
1.3.6.1.3.117.6.1.4.2.1.1 |
Index that identifies the InfiniBand data port. The IBA
defines a range of valid data ports from 1 to N, where
N can have a maximum value of 254. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbDataPort |
|
|
ibPmaPortVlXmitWait0 |
1.3.6.1.3.117.6.1.4.2.1.2 |
Total number of ticks during which the port had data to transmit
on VL0 but no data was sent during the entire tick either because
of insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait1 |
1.3.6.1.3.117.6.1.4.2.1.3 |
Total number of ticks during which the port had data to transmit
on VL1 but no data was sent during the entire tick either because
of insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait2 |
1.3.6.1.3.117.6.1.4.2.1.4 |
Total number of ticks during which the port had data to transmit
on VL2 but no data was sent during the entire tick either because
of insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait3 |
1.3.6.1.3.117.6.1.4.2.1.5 |
Total number of ticks during which the port had data to transmit
on VL3 but no data was sent during the entire tick either because
of insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait4 |
1.3.6.1.3.117.6.1.4.2.1.6 |
Total number of ticks during which the port had data to transmit
on VL4 but no data was sent during the entire tick either because
of insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait5 |
1.3.6.1.3.117.6.1.4.2.1.7 |
Total number of ticks during which the port had data to transmit
on VL5 but no data was sent during the entire tick either because
of insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait6 |
1.3.6.1.3.117.6.1.4.2.1.8 |
Total number of ticks during which the port had data to transmit
on VL6 but no data was sent during the entire tick either because
of insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait7 |
1.3.6.1.3.117.6.1.4.2.1.9 |
Total number of ticks during which the port had data to transmit
on VL7 but no data was sent during the entire tick either because
of insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait8 |
1.3.6.1.3.117.6.1.4.2.1.10 |
Total number of ticks during which the port had data to transmit
on VL8 but no data was sent during the entire tick either because
of insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait9 |
1.3.6.1.3.117.6.1.4.2.1.11 |
Total number of ticks during which the port had data to transmit
on VL9 but no data was sent during the entire tick either because
of insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait10 |
1.3.6.1.3.117.6.1.4.2.1.12 |
Total number of ticks during which the port had data to transmit
on VL10 but no data was sent during the entire tick because of
insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait11 |
1.3.6.1.3.117.6.1.4.2.1.13 |
Total number of ticks during which the port had data to transmit
on VL11 but no data was sent during the entire tick because of
insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait12 |
1.3.6.1.3.117.6.1.4.2.1.14 |
Total number of ticks during which the port had data to transmit
on VL12 but no data was sent during the entire tick because of
insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait13 |
1.3.6.1.3.117.6.1.4.2.1.15 |
Total number of ticks during which the port had data to transmit
on VL13 but no data was sent during the entire tick because of
insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait14 |
1.3.6.1.3.117.6.1.4.2.1.16 |
Total number of ticks during which the port had data to transmit
on VL14 but no data was sent during the entire tick because of
insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlXmitWait15 |
1.3.6.1.3.117.6.1.4.2.1.17 |
Total number of ticks during which the port had data to transmit
on VL15 but no data was sent during the entire tick because of
insufficient credits or because of lack of arbitration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestionEntry |
1.3.6.1.3.117.6.1.4.3.1 |
A conceptual row of the ibPmaPortVlSwCongestionTable
containing information about the software congestion per
virtual lane for a particular data port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbPmaPortVlSwCongestionEntry |
|
|
ibPmaPortVlSwCongestionIndex |
1.3.6.1.3.117.6.1.4.3.1.1 |
Index that identifies the InfiniBand data port. The IBA
defines a range of valid data ports from 1 to N, where
N can have a maximum value of 254. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IbDataPort |
|
|
ibPmaPortVlSwCongestion0 |
1.3.6.1.3.117.6.1.4.3.1.2 |
Total number of packets to be transmitted on VL 0 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion1 |
1.3.6.1.3.117.6.1.4.3.1.3 |
Total number of packets to be transmitted on VL 1 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion2 |
1.3.6.1.3.117.6.1.4.3.1.4 |
Total number of packets to be transmitted on VL 2 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion3 |
1.3.6.1.3.117.6.1.4.3.1.5 |
Total number of packets to be transmitted on VL 3 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion4 |
1.3.6.1.3.117.6.1.4.3.1.6 |
Total number of packets to be transmitted on VL 4 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion5 |
1.3.6.1.3.117.6.1.4.3.1.7 |
Total number of packets to be transmitted on VL 5 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion6 |
1.3.6.1.3.117.6.1.4.3.1.8 |
Total number of packets to be transmitted on VL 6 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion7 |
1.3.6.1.3.117.6.1.4.3.1.9 |
Total number of packets to be transmitted on VL 7 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion8 |
1.3.6.1.3.117.6.1.4.3.1.10 |
Total number of packets to be transmitted on VL 8 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion9 |
1.3.6.1.3.117.6.1.4.3.1.11 |
Total number of packets to be transmitted on VL 9 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion10 |
1.3.6.1.3.117.6.1.4.3.1.12 |
Total number of packets to be transmitted on VL 10 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion11 |
1.3.6.1.3.117.6.1.4.3.1.13 |
Total number of packets to be transmitted on VL 11 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion12 |
1.3.6.1.3.117.6.1.4.3.1.14 |
Total number of packets to be transmitted on VL 12 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion13 |
1.3.6.1.3.117.6.1.4.3.1.15 |
Total number of packets to be transmitted on VL 13 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion14 |
1.3.6.1.3.117.6.1.4.3.1.16 |
Total number of packets to be transmitted on VL 14 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaPortVlSwCongestion15 |
1.3.6.1.3.117.6.1.4.3.1.17 |
Total number of packets to be transmitted on VL 15 for
this output port that were discarded because of congestion.
This includes the following reasons
- Switch lifetime limit exceeded
- Switch HOQ limit exceeded. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
ibPmaBasicNodeCompliance |
1.3.6.1.3.117.6.2.1.1 |
The basic node implementation requirements for agents that
support the IPOIB PMA MIB. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
ibPmaFullNodeCompliance |
1.3.6.1.3.117.6.2.1.2 |
The full node implementation requirements for agents that
support the IPOIB PMA MIB. This include all of the optional
counter groups |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
ibPmaPortCntrsMandatoryGroup |
1.3.6.1.3.117.6.2.2.1 |
The ibPmaPortCntrsMandatoryGroup defines the MIB objects that
describe the mandatory counters that must be maintained by the
Performance Management Agent. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
ibPmaPortCntrsOptionalGroup |
1.3.6.1.3.117.6.2.2.2 |
The ibPmaPortCntrsOptionalGroup defines the MIB objects that
describe the optional counters that must be maintained by the
Performance Management Agent. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
ibPmaPortRcvErrGroup |
1.3.6.1.3.117.6.2.2.3 |
The ibPmaPortRcvErrGroup defines the MIB objects that describe
the receive error counters for a particular port by the PMA. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
ibPmaPortXmitDiscardGroup |
1.3.6.1.3.117.6.2.2.4 |
The ibPmaPortXmitDiscardGroup defines the MIB objects that
describe the transmit discard details for a particular port
by the PMA. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
ibPmaPortFlowCtlCntrsGroup |
1.3.6.1.3.117.6.2.2.5 |
The ibPmaPortFlowCtlCntrsGroup defines the MIB objects that
describe the transmit and receive flow control counters for
a particular port by the PMA. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
ibPmaPortOpCodeRcvCntrsGroup |
1.3.6.1.3.117.6.2.2.6 |
The ibPmaPortOpCodeRcvCntrsGroup defines the MIB objects that
describe the receive counters for a particular port and op
code by the PMA. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
ibPmaPortOpCodeVlCntrsGroup |
1.3.6.1.3.117.6.2.2.7 |
The ibPmaPortOpCodeVlCntrsGroup defines the MIB objects that
describe the packet counters for a particular port, op code,
and virtual lane by the PMA. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
ibPmaPortOpCodeVlDataCntrsGroup |
1.3.6.1.3.117.6.2.2.8 |
The ibPmaPortOpCodeVlDataCntrsGroup defines the MIB objects that
describe the octet counters for a particular port, op code, and
virtual lane by the PMA. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
ibPmaPortVlXmitFCUpErrGroup |
1.3.6.1.3.117.6.2.2.9 |
The ibPmaPortVlXmitFCUpErrGroup defines the MIB objects that
describe the transmit flow control update counters for a
particular port and virtual lane by the PMA. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
ibPmaPortVlXmitWaitGroup |
1.3.6.1.3.117.6.2.2.10 |
The ibPmaPortVlXmitWaitGroup defines the MIB objects that
describe the transmit wait counters for a particular port
and virtual lane by the PMA. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
ibPmaPortVlSwCongestionGroup |
1.3.6.1.3.117.6.2.2.11 |
The ibPmaPortVlSwCongestionGroup defines the MIB objects that
describe the software congestion counters for a particular port
and virtual lane by the PMA. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|