PPP-LCP-MIB

File: PPP-LCP-MIB.mib (27521 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

Counter ifIndex transmission
OBJECT-TYPE

Defined Types

PppLinkStatusEntry  
SEQUENCE    
  pppLinkStatusPhysicalIndex INTEGER
  pppLinkStatusBadAddresses Counter
  pppLinkStatusBadControls Counter
  pppLinkStatusPacketTooLongs Counter
  pppLinkStatusBadFCSs Counter
  pppLinkStatusLocalMRU INTEGER
  pppLinkStatusRemoteMRU INTEGER
  pppLinkStatusLocalToPeerACCMap OCTET STRING
  pppLinkStatusPeerToLocalACCMap OCTET STRING
  pppLinkStatusLocalToRemoteProtocolCompression INTEGER
  pppLinkStatusRemoteToLocalProtocolCompression INTEGER
  pppLinkStatusLocalToRemoteACCompression INTEGER
  pppLinkStatusRemoteToLocalACCompression INTEGER
  pppLinkStatusTransmitFcsSize INTEGER
  pppLinkStatusReceiveFcsSize INTEGER

PppLinkConfigEntry  
SEQUENCE    
  pppLinkConfigInitialMRU INTEGER
  pppLinkConfigReceiveACCMap OCTET STRING
  pppLinkConfigTransmitACCMap OCTET STRING
  pppLinkConfigMagicNumber INTEGER
  pppLinkConfigFcsSize INTEGER

PppLqrEntry  
SEQUENCE    
  pppLqrQuality INTEGER
  pppLqrInGoodOctets Counter
  pppLqrLocalPeriod INTEGER
  pppLqrRemotePeriod INTEGER
  pppLqrOutLQRs Counter
  pppLqrInLQRs Counter

PppLqrConfigEntry  
SEQUENCE    
  pppLqrConfigPeriod INTEGER
  pppLqrConfigStatus INTEGER

PppLqrExtnsEntry  
SEQUENCE    
  pppLqrExtnsLastReceivedLqrPacket OCTET STRING Size(68)

Defined Values

ppp 1.3.6.1.2.1.10.23
OBJECT IDENTIFIER    

pppLcp 1.3.6.1.2.1.10.23.1
OBJECT IDENTIFIER    


pppLqr 1.3.6.1.2.1.10.23.1.2
OBJECT IDENTIFIER    

pppTests 1.3.6.1.2.1.10.23.1.3
OBJECT IDENTIFIER    

pppLinkStatusTable 1.3.6.1.2.1.10.23.1.1.1
A table containing PPP-link specific variables for this PPP implementation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppLinkStatusEntry

pppLinkStatusEntry 1.3.6.1.2.1.10.23.1.1.1.1
Management information about a particular PPP Link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PppLinkStatusEntry  

pppLinkStatusPhysicalIndex 1.3.6.1.2.1.10.23.1.1.1.1.1
The value of ifIndex that identifies the lower-level interface over which this PPP Link is operating. This interface would usually be an HDLC or RS-232 type of interface. If there is no lower-layer interface element, or there is no ifEntry for the element, or the element can not be identified, then the value of this object is 0. For example, suppose that PPP is operating over a serial port. This would use two entries in the ifTable. The PPP could be running over `interface' number 123 and the serial port could be running over `interface' number 987. Therefore, ifSpecific.123 would contain the OBJECT IDENTIFIER ppp pppLinkStatusPhysicalIndex.123 would contain 987, and ifSpecific.987 would contain the OBJECT IDENTIFIER for the serial-port's media- specific MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

pppLinkStatusBadAddresses 1.3.6.1.2.1.10.23.1.1.1.1.2
The number of packets received with an incorrect Address Field. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pppLinkStatusBadControls 1.3.6.1.2.1.10.23.1.1.1.1.3
The number of packets received on this link with an incorrect Control Field. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pppLinkStatusPacketTooLongs 1.3.6.1.2.1.10.23.1.1.1.1.4
The number of received packets that have been discarded because their length exceeded the MRU. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link. NOTE, packets which are longer than the MRU but which are successfully received and processed are NOT included in this count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pppLinkStatusBadFCSs 1.3.6.1.2.1.10.23.1.1.1.1.5
The number of received packets that have been discarded due to having an incorrect FCS. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pppLinkStatusLocalMRU 1.3.6.1.2.1.10.23.1.1.1.1.6
The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

pppLinkStatusRemoteMRU 1.3.6.1.2.1.10.23.1.1.1.1.7
The current value of the MRU for the remote PPP Entity. This value is the MRU that the local entity is using when sending packets to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

pppLinkStatusLocalToPeerACCMap 1.3.6.1.2.1.10.23.1.1.1.1.8
The current value of the ACC Map used for sending packets from the local PPP entity to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

pppLinkStatusPeerToLocalACCMap 1.3.6.1.2.1.10.23.1.1.1.1.9
The ACC Map used by the remote PPP entity when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

pppLinkStatusLocalToRemoteProtocolCompression 1.3.6.1.2.1.10.23.1.1.1.1.10
Indicates whether the local PPP entity will use Protocol Compression when transmitting packets to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pppLinkStatusRemoteToLocalProtocolCompression 1.3.6.1.2.1.10.23.1.1.1.1.11
Indicates whether the remote PPP entity will use Protocol Compression when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pppLinkStatusLocalToRemoteACCompression 1.3.6.1.2.1.10.23.1.1.1.1.12
Indicates whether the local PPP entity will use Address and Control Compression when transmitting packets to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pppLinkStatusRemoteToLocalACCompression 1.3.6.1.2.1.10.23.1.1.1.1.13
Indicates whether the remote PPP entity will use Address and Control Compression when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pppLinkStatusTransmitFcsSize 1.3.6.1.2.1.10.23.1.1.1.1.14
The size of the Frame Check Sequence (FCS) in bits that the local node will generate when sending packets to the remote node. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

pppLinkStatusReceiveFcsSize 1.3.6.1.2.1.10.23.1.1.1.1.15
The size of the Frame Check Sequence (FCS) in bits that the remote node will generate when sending packets to the local node. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

pppLinkConfigTable 1.3.6.1.2.1.10.23.1.1.2
A table containing the LCP configuration parameters for this PPP Link. These variables represent the initial configuration of the PPP Link. The actual values of the parameters may be changed when the link is brought up via the LCP options negotiation mechanism.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppLinkConfigEntry

pppLinkConfigEntry 1.3.6.1.2.1.10.23.1.1.2.1
Configuration information about a particular PPP Link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PppLinkConfigEntry  

pppLinkConfigInitialMRU 1.3.6.1.2.1.10.23.1.1.2.1.1
The initial Maximum Receive Unit (MRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 0 then the local PPP entity will not advertise any MRU to the remote entity and the default MRU will be assumed. Changing this object will have effect when the link is next restarted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

pppLinkConfigReceiveACCMap 1.3.6.1.2.1.10.23.1.1.2.1.2
The Asynchronous-Control-Character-Map (ACC) that the local PPP entity requires for use on its receive side. In effect, this is the ACC Map that is required in order to ensure that the local modem will successfully receive all characters. The actual ACC map used on the receive side of the link will be a combination of the local node's pppLinkConfigReceiveACCMap and the remote node's pppLinkConfigTransmitACCMap. Changing this object will have effect when the link is next restarted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

pppLinkConfigTransmitACCMap 1.3.6.1.2.1.10.23.1.1.2.1.3
The Asynchronous-Control-Character-Map (ACC) that the local PPP entity requires for use on its transmit side. In effect, this is the ACC Map that is required in order to ensure that all characters can be successfully transmitted through the local modem. The actual ACC map used on the transmit side of the link will be a combination of the local node's pppLinkConfigTransmitACCMap and the remote node's pppLinkConfigReceiveACCMap. Changing this object will have effect when the link is next restarted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

pppLinkConfigMagicNumber 1.3.6.1.2.1.10.23.1.1.2.1.4
If true(2) then the local node will attempt to perform Magic Number negotiation with the remote node. If false(1) then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote node, per the PPP specification. Changing this object will have effect when the link is next restarted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(1), true(2)  

pppLinkConfigFcsSize 1.3.6.1.2.1.10.23.1.1.2.1.5
The size of the FCS, in bits, the local node will attempt to negotiate for use with the remote node. Regardless of the value of this object, the local node will comply with any FCS size negotiations initiated by the remote node, per the PPP specification. Changing this object will have effect when the link is next restarted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..128  

pppLqrTable 1.3.6.1.2.1.10.23.1.2.1
Table containing the LQR parameters and statistics for the local PPP entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppLqrEntry

pppLqrEntry 1.3.6.1.2.1.10.23.1.2.1.1
LQR information for a particular PPP link. A PPP link will have an entry in this table if and only if LQR Quality Monitoring has been successfully negotiated for said link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PppLqrEntry  

pppLqrQuality 1.3.6.1.2.1.10.23.1.2.1.1.1
The current quality of the link as declared by the local PPP entity's Link-Quality Management modules. No effort is made to define good or bad, nor the policy used to determine it. The not-determined value indicates that the entity does not actually evaluate the link's quality. This value is used to disambiguate the `determined to be good' case from the `no determination made and presumed to be good' case.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER good(1), bad(2), not-determined(3)  

pppLqrInGoodOctets 1.3.6.1.2.1.10.23.1.2.1.1.2
The LQR InGoodOctets counter for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pppLqrLocalPeriod 1.3.6.1.2.1.10.23.1.2.1.1.3
The LQR reporting period, in hundredths of a second that is in effect for the local PPP entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

pppLqrRemotePeriod 1.3.6.1.2.1.10.23.1.2.1.1.4
The LQR reporting period, in hundredths of a second, that is in effect for the remote PPP entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

pppLqrOutLQRs 1.3.6.1.2.1.10.23.1.2.1.1.5
The value of the OutLQRs counter on the local node for the link identified by ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pppLqrInLQRs 1.3.6.1.2.1.10.23.1.2.1.1.6
The value of the InLQRs counter on the local node for the link identified by ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pppLqrConfigTable 1.3.6.1.2.1.10.23.1.2.2
Table containing the LQR Configuration parameters for the local PPP entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppLqrConfigEntry

pppLqrConfigEntry 1.3.6.1.2.1.10.23.1.2.2.1
LQR configuration information for a particular PPP link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PppLqrConfigEntry  

pppLqrConfigPeriod 1.3.6.1.2.1.10.23.1.2.2.1.1
The LQR Reporting Period that the local PPP entity will attempt to negotiate with the remote entity, in units of hundredths of a second. Changing this object will have effect when the link is next restarted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

pppLqrConfigStatus 1.3.6.1.2.1.10.23.1.2.2.1.2
If enabled(2) then the local node will attempt to perform LQR negotiation with the remote node. If disabled(1) then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote node, per the PPP specification. Changing this object will have effect when the link is next restarted. Setting this object to the value disabled(1) has the effect of invalidating the corresponding entry in the pppLqrConfigTable object. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

pppLqrExtnsTable 1.3.6.1.2.1.10.23.1.2.3
Table containing additional LQR information for the local PPP entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppLqrExtnsEntry

pppLqrExtnsEntry 1.3.6.1.2.1.10.23.1.2.3.1
Extended LQR information for a particular PPP link. Assuming that this group has been implemented, a PPP link will have an entry in this table if and only if LQR Quality Monitoring has been successfully negotiated for said link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PppLqrExtnsEntry  

pppLqrExtnsLastReceivedLqrPacket 1.3.6.1.2.1.10.23.1.2.3.1.1
This object contains the most recently received LQR packet. The format of the packet is as described in the LQM Protocol specificiation. All fields of the packet, including the `save' fields, are stored in this object. The LQR packet is stored in network byte order. The LAP-B and PPP headers are not stored in this object; the first four octets of this variable contain the Magic-Number field, the second four octets contain the LastOutLQRs field and so on. The last four octets of this object contain the SaveInOctets field of the LQR packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(68)  

pppEchoTest 1.3.6.1.2.1.10.23.1.3.1
OBJECT IDENTIFIER    

pppDiscardTest 1.3.6.1.2.1.10.23.1.3.2
OBJECT IDENTIFIER