PRVT-SYNC-ETHERNET-MIB

File: PRVT-SYNC-ETHERNET-MIB.mib (22037 bytes)

Imported modules

IF-MIB	PRVT-SWITCH-MIB	SNMPv2-SMI
SNMPv2-TC

Imported symbols

ifIndex	switch	Integer32
MODULE-IDENTITY	NOTIFICATION-TYPE	OBJECT-TYPE
Unsigned32	DateAndTime	RowStatus
TEXTUAL-CONVENTION	TruthValue

Defined Types

PrvtSyncEthernetQualityLevelType
Clock Quality Levels.
TEXTUAL-CONVENTION
	INTEGER	prc(2), ssuA(4), ssuB(8), sec(11), dnu(15), stu(16), prs(17), tnc(20), st2(23), st3(26), smc(28), st3e(29), prov(30), dus(31), invalid(64), failed(65)

SyncEthernetClockSourceEntry
SEQUENCE
	syncEthernetClockSourceRowStatus	RowStatus
	syncEthernetClockSourceAdminStatus	INTEGER
	syncEthernetClockSourceEsmc	TruthValue
	syncEthernetClockSourceFrequency	Unsigned32
	syncEthernetClockSourceQuality	PrvtSyncEthernetQualityLevelType
	syncEthernetClockSourceQualityChangeNotify	TruthValue
	syncEthernetClockSourceRecvQualityLevel	PrvtSyncEthernetQualityLevelType
	syncEthernetClockSourceLastRecvEsmcPduTime	DateAndTime
	syncEthernetClockSourceLastRecvEsmcErrorPduTime	DateAndTime
	syncEthernetClockSourceLastRecvEsmcPduType	Unsigned32
	syncEthernetClockSourceLastRecvLastError	Unsigned32
	syncEthernetClockSourceNumRecvEsmcPdu	Unsigned32
	syncEthernetClockSourceNumDiscEsmcPdu	Unsigned32
	syncEthernetClockSourceNumSignalFail	Unsigned32
	syncEthernetClockSourceQualityInvalidNotify	TruthValue
	syncEthernetClockSourceEsmcInvalidNotify	TruthValue

SyncEthernetClockOutputEntry
SEQUENCE
	syncEthernetClockOutputRowStatus	RowStatus
	syncEthernetClockOutputEsmc	TruthValue
	syncEthernetClockOutputFrequency	Unsigned32
	syncEthernetClockOutputDpll	Integer32
	syncEthernetClockOutputQualityLevel	PrvtSyncEthernetQualityLevelType
	syncEthernetClockOutputLastQualityLevelChange	DateAndTime
	syncEthernetClockOutputMsgEvent	TruthValue
	syncEthernetClockOutputNumTransmittedEsmcPdu	Unsigned32
	syncEthernetClockOutputNumTransmittedEventEsmcPdu	Unsigned32

SyncEthernetDpllEntry
SEQUENCE
	syncEthernetDpllModuleId	Integer32
	syncEthernetDpllRowStatus	RowStatus
	syncEthernetDpllAdminStatus	INTEGER
	syncEthernetDpllReferenceSelection	INTEGER
	syncEthernetDpllEnableQualityLevel	TruthValue
	syncEthernetDpllStatusChangeNotify	TruthValue
	syncEthernetDpllReferenceChangeNotify	TruthValue
	syncEthernetDpllStatus	INTEGER
	syncEthernetDpllStatusLastChange	DateAndTime
	syncEthernetDpllSystemQualityLevel	PrvtSyncEthernetQualityLevelType
	syncEthernetDpllSystemQualityLevelLastChange	DateAndTime
	syncEthernetDpllSelectedReferenceClock	OCTET STRING
	syncEthernetDpllSelectedReferenceClockChange	DateAndTime

SyncEthernetDpllClkRefEntry
SEQUENCE
	syncEthernetDpllClkRefRowStatus	RowStatus
	syncEthernetDpllClkRefPriority	Unsigned32
	syncEthernetDpllClkRefLockOut	TruthValue
	syncEthernetDpllClkRefFailStatus	Integer32

Defined Values

prvtSyncEthernetMIB		1.3.6.1.4.1.738.1.5.170
This is the MIB module to manage synchronization over ethernet.
MODULE-IDENTITY

prvtSyncEthernetMIBNotifications		1.3.6.1.4.1.738.1.5.170.0
OBJECT IDENTIFIER

prvtSyncEthernetMIBObjects		1.3.6.1.4.1.738.1.5.170.1
OBJECT IDENTIFIER

syncEthernetHoldOffTime		1.3.6.1.4.1.738.1.5.170.1.1
Timeout value, in millisseconds, for the hold-off timer.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	300..1800

syncEthernetWaitToRestoreTime		1.3.6.1.4.1.738.1.5.170.1.2
Timeout value, in minutes, for the wait-to-restore timer.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..12

syncEthernetG781OptionMode		1.3.6.1.4.1.738.1.5.170.1.3
Specify which G.781 option mode to operate in.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	option1(1), option2(2)

syncEthernetClockSourceTable		1.3.6.1.4.1.738.1.5.170.1.10
Source clock synchronization table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SyncEthernetClockSourceEntry

syncEthernetClockSourceEntry		1.3.6.1.4.1.738.1.5.170.1.10.1
Source clock synchronization entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	SyncEthernetClockSourceEntry

syncEthernetClockSourceRowStatus		1.3.6.1.4.1.738.1.5.170.1.10.1.2
Clock source synchronization table rowstatus.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

syncEthernetClockSourceAdminStatus		1.3.6.1.4.1.738.1.5.170.1.10.1.3
Enable clock source.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	up(1), down(2)

syncEthernetClockSourceEsmc		1.3.6.1.4.1.738.1.5.170.1.10.1.4
Enable receiving ESMC messages (Synchronization Status Messages). Only applicable for BITS clock sources.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

syncEthernetClockSourceFrequency		1.3.6.1.4.1.738.1.5.170.1.10.1.5
Specify input frequency - N*8kHz Only applicable for BITS clock sources.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2431

syncEthernetClockSourceQuality		1.3.6.1.4.1.738.1.5.170.1.10.1.6
Specify quality level In G781-option I mode, valid values are prs, ssuA, ssuB, dnu. In G781-option II mode, valid values are stu, prs, tnc, st2, st3, smc, st3e, dus, prov.
Status: current	Access: read-create
OBJECT-TYPE
	PrvtSyncEthernetQualityLevelType

syncEthernetClockSourceQualityChangeNotify		1.3.6.1.4.1.738.1.5.170.1.10.1.7
Enable quality level change notifications
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

syncEthernetClockSourceRecvQualityLevel		1.3.6.1.4.1.738.1.5.170.1.10.1.8
The received quality level value.
Status: current	Access: read-only
OBJECT-TYPE
	PrvtSyncEthernetQualityLevelType

syncEthernetClockSourceLastRecvEsmcPduTime		1.3.6.1.4.1.738.1.5.170.1.10.1.9
Time elapsed since the last valid ESMC message received
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

syncEthernetClockSourceLastRecvEsmcErrorPduTime		1.3.6.1.4.1.738.1.5.170.1.10.1.10
Time elapsed since the last invalid ESMC message received
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

syncEthernetClockSourceLastRecvEsmcPduType		1.3.6.1.4.1.738.1.5.170.1.10.1.11
Last received ESMC message type
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

syncEthernetClockSourceLastRecvLastError		1.3.6.1.4.1.738.1.5.170.1.10.1.12
Last error code
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

syncEthernetClockSourceNumRecvEsmcPdu		1.3.6.1.4.1.738.1.5.170.1.10.1.13
Total number of received ESMC messages
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

syncEthernetClockSourceNumDiscEsmcPdu		1.3.6.1.4.1.738.1.5.170.1.10.1.14
Total number of discarded ESMC messages
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

syncEthernetClockSourceNumSignalFail		1.3.6.1.4.1.738.1.5.170.1.10.1.15
Total number of generated signal failure events
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

syncEthernetClockSourceQualityInvalidNotify		1.3.6.1.4.1.738.1.5.170.1.10.1.16
Enable invalid quality notifications
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

syncEthernetClockSourceEsmcInvalidNotify		1.3.6.1.4.1.738.1.5.170.1.10.1.17
Enable invalid ESMC notifications
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

syncEthernetClockOutputTable		1.3.6.1.4.1.738.1.5.170.1.12
Output clock synchronization table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SyncEthernetClockOutputEntry

syncEthernetClockOutputEntry		1.3.6.1.4.1.738.1.5.170.1.12.1
Output clock synchronization entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	SyncEthernetClockOutputEntry

syncEthernetClockOutputRowStatus		1.3.6.1.4.1.738.1.5.170.1.12.1.2
syncEthernetClockOutput table rowStatus
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

syncEthernetClockOutputEsmc		1.3.6.1.4.1.738.1.5.170.1.12.1.3
Enable sending ESMC messages Only applicable for BITS clock outputs.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

syncEthernetClockOutputFrequency		1.3.6.1.4.1.738.1.5.170.1.12.1.4
Specify output frequency - N*8kHz Only applicable for BITS clock outputs.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2431

syncEthernetClockOutputDpll		1.3.6.1.4.1.738.1.5.170.1.12.1.5
Assign output clock to DPLL Only applicable for BITS clock outputs. Must be set to the syncEthernetDpllModuleId value of an existing row in syncEthernetDpllTable.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..1

syncEthernetClockOutputQualityLevel		1.3.6.1.4.1.738.1.5.170.1.12.1.6
Last quality level value sent
Status: current	Access: read-only
OBJECT-TYPE
	PrvtSyncEthernetQualityLevelType

syncEthernetClockOutputLastQualityLevelChange		1.3.6.1.4.1.738.1.5.170.1.12.1.7
Time elapsed since the last quality level change
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

syncEthernetClockOutputMsgEvent		1.3.6.1.4.1.738.1.5.170.1.12.1.8
Last ESMC message type sent
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

syncEthernetClockOutputNumTransmittedEsmcPdu		1.3.6.1.4.1.738.1.5.170.1.12.1.9
Total number of ESMC messages sent
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

syncEthernetClockOutputNumTransmittedEventEsmcPdu		1.3.6.1.4.1.738.1.5.170.1.12.1.10
Total number of ESMC messages sent
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

syncEthernetDpllTable		1.3.6.1.4.1.738.1.5.170.1.14
Synchronization DPLL table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SyncEthernetDpllEntry

syncEthernetDpllEntry		1.3.6.1.4.1.738.1.5.170.1.14.1
Synchronization DPLL entry
Status: current	Access: not-accessible
OBJECT-TYPE
	SyncEthernetDpllEntry

syncEthernetDpllModuleId		1.3.6.1.4.1.738.1.5.170.1.14.1.1
Synchronization DPLL module index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..1

syncEthernetDpllRowStatus		1.3.6.1.4.1.738.1.5.170.1.14.1.2
Synchronization DPLL rowstatus
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

syncEthernetDpllAdminStatus		1.3.6.1.4.1.738.1.5.170.1.14.1.3
Administrative status of the DPLL
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	up(1), down(2)

syncEthernetDpllReferenceSelection		1.3.6.1.4.1.738.1.5.170.1.14.1.4
Specify reference selection mode
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	freerun(1), static(2), g781(3)

syncEthernetDpllEnableQualityLevel		1.3.6.1.4.1.738.1.5.170.1.14.1.5
Enable reference selection based on quality level Only applicable when syncEthernetDpllReferenceSelection equals g781.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

syncEthernetDpllStatusChangeNotify		1.3.6.1.4.1.738.1.5.170.1.14.1.6
Enable DPLL status change notifications
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

syncEthernetDpllReferenceChangeNotify		1.3.6.1.4.1.738.1.5.170.1.14.1.7
Enable reference clock change notifications
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

syncEthernetDpllStatus		1.3.6.1.4.1.738.1.5.170.1.14.1.8
DPLL operational status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	freerun(0), locked(1), holdover(2), refFailure(3)

syncEthernetDpllStatusLastChange		1.3.6.1.4.1.738.1.5.170.1.14.1.9
Time since last DPLL status change
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

syncEthernetDpllSystemQualityLevel		1.3.6.1.4.1.738.1.5.170.1.14.1.10
System quality level
Status: current	Access: read-only
OBJECT-TYPE
	PrvtSyncEthernetQualityLevelType

syncEthernetDpllSystemQualityLevelLastChange		1.3.6.1.4.1.738.1.5.170.1.14.1.11
Time since last system quality level change
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

syncEthernetDpllSelectedReferenceClock		1.3.6.1.4.1.738.1.5.170.1.14.1.12
The selected reference clock source
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

syncEthernetDpllSelectedReferenceClockChange		1.3.6.1.4.1.738.1.5.170.1.14.1.13
Time since last reference clock change
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

syncEthernetDpllClkRefTable		1.3.6.1.4.1.738.1.5.170.1.16
Synchronization DPLL clock reference table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SyncEthernetDpllClkRefEntry

syncEthernetDpllClkRefEntry		1.3.6.1.4.1.738.1.5.170.1.16.1
Synchronization DPLL clock reference entry
Status: current	Access: not-accessible
OBJECT-TYPE
	SyncEthernetDpllClkRefEntry

syncEthernetDpllClkRefRowStatus		1.3.6.1.4.1.738.1.5.170.1.16.1.2
Synchronization DPLL clock reference rowstatus
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

syncEthernetDpllClkRefPriority		1.3.6.1.4.1.738.1.5.170.1.16.1.3
Specify reference clock priority
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..256

syncEthernetDpllClkRefLockOut		1.3.6.1.4.1.738.1.5.170.1.16.1.4
Lock reference clock
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

syncEthernetDpllClkRefFailStatus		1.3.6.1.4.1.738.1.5.170.1.16.1.5
DPLL reference clock status
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

syncEthernetInvalidESMC		1.3.6.1.4.1.738.1.5.170.0.1
Invalid ESMC has been received.
Status: current	Access: read-only
NOTIFICATION-TYPE

syncEthernetQualityLevelChange		1.3.6.1.4.1.738.1.5.170.0.2
Current value of syncEthernetClockSourceQuality has been changed.
Status: current	Access: read-only
NOTIFICATION-TYPE

syncEthernetInvalidQualityLevelReceived		1.3.6.1.4.1.738.1.5.170.0.3
Invalid Quality level equals to QL-INVx has been received.
Status: current	Access: read-only
NOTIFICATION-TYPE

syncEthernetDPLLReferenceChange		1.3.6.1.4.1.738.1.5.170.0.4
DPLL's reference clock changed.
Status: current	Access: read-only
NOTIFICATION-TYPE

syncEthernetDPLLChanged		1.3.6.1.4.1.738.1.5.170.0.5
Some of the DPLL's operational status changes.
Status: current	Access: read-only
NOTIFICATION-TYPE

syncEthernetDPLLLockFailed		1.3.6.1.4.1.738.1.5.170.0.6
If after new Reference selection the DPLL can't lock onto it, this will affect the Clock Source associated with that reference
Status: current	Access: read-only
NOTIFICATION-TYPE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor