QOS

File: QOS.mib (13778 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC ExaltComm
ExaltComProducts

Imported symbols

Integer32 MODULE-IDENTITY OBJECT-TYPE
DisplayString VlanIdT QosTagT
EnableStatusT radioConfig

Defined Types

QosPriorityT  
This MIB variable sets Qos priority, the higher number the higher priority
TEXTUAL-CONVENTION    
  INTEGER priority0(0), priority1(1), priority2(2), priority3(3)  

QosModeT  
This MIB variable sets Qos Mode
TEXTUAL-CONVENTION    
  INTEGER disable(0), qos-mode-802-1p(4), qos-mode-diffserv(5), qos-mode-port(6)  

QosScheduleModeT  
This MIB variable defines available QoS Scheduler modes
TEXTUAL-CONVENTION    
  INTEGER weighted-round-robin(0), hybrid1-mode-3sp-2wrr-1wrr-0wrr(1), hybrid2-mode-3sp-2sp-1wrr-0wrr(2), strict-priority(3)  

QosCos3WeightT  
This MIB variable defines available weights for Queue 3
TEXTUAL-CONVENTION    
  INTEGER w-8(8), w-16(16), w-32(32)  

QosCos2WeightT  
This MIB variable defines available weights for Queue 2
TEXTUAL-CONVENTION    
  INTEGER w-4(4), w-8(8), w-16(16)  

QosCos1WeightT  
This MIB variable defines available weights for Queue 1
TEXTUAL-CONVENTION    
  INTEGER w-2(2), w-4(4), w-8(8)  

QosCos0WeightT  
This MIB variable defines available weights for Queue 0
TEXTUAL-CONVENTION    
  INTEGER w-1(1), w-2(2), w-4(4)  

QosDiffServEntry  
SEQUENCE    
  diffServValue INTEGER
  diffServPriority QosPriorityT
  diffServEnable EnableStatusT

QosEth1m802dot1pEntry  
SEQUENCE    
  tagEth1Priority QosPriorityT
  tagEth1Status EnableStatusT

QosEth1PortEntry  
SEQUENCE    
  portEth1Priority QosPriorityT
  portEth1Status EnableStatusT

QosEth2m802dot1pEntry  
SEQUENCE    
  tagEth2Priority QosPriorityT
  tagEth2Status EnableStatusT

QosEth2PortEntry  
SEQUENCE    
  portEth2Priority QosPriorityT
  portEth2Status EnableStatusT

Defined Values

advSystemConfig 1.3.6.1.4.1.25651.1.2.3.5
This is the device specific advanced configuration section.
Status: current Access: read-only
OBJECT-IDENTITY    

extAirG2QoS 1.3.6.1.4.1.25651.1.2.3.5.8
QOS configuration.
Status: current Access: read-only
OBJECT-IDENTITY    

qosDefaultQueue 1.3.6.1.4.1.25651.1.2.3.5.8.1
The default queue to catch all traffic that don't belong to any queue.
Status: current Access: read-write
OBJECT-TYPE    
  QosPriorityT  

qosEth1Mode 1.3.6.1.4.1.25651.1.2.3.5.8.2
This setting set the qos mode or disable QoS on ETH1.
Status: current Access: read-write
OBJECT-TYPE    
  QosModeT  

qosEth2Mode 1.3.6.1.4.1.25651.1.2.3.5.8.3
This setting set the qos mode or disable QoS on ETH2.
Status: current Access: read-write
OBJECT-TYPE    
  QosModeT  

qosDiffServList 1.3.6.1.4.1.25651.1.2.3.5.8.4
This is a table of Qos DiffServ value and proiority.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QosDiffServEntry

qosScheduler 1.3.6.1.4.1.25651.1.2.3.5.8.7
QOS Scheduler configuration.
Status: current Access: not-accessible
OBJECT-IDENTITY    

qosDiffServEntry 1.3.6.1.4.1.25651.1.2.3.5.8.4.1
This is DiffServ table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  QosDiffServEntry  

diffServValue 1.3.6.1.4.1.25651.1.2.3.5.8.4.1.1
This is the value for the corresponding DiffServ table entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..63  

diffServPriority 1.3.6.1.4.1.25651.1.2.3.5.8.4.1.2
This is the priority for the corresponding DiffServ table entry.
Status: current Access: read-write
OBJECT-TYPE    
  QosPriorityT  

diffServEnable 1.3.6.1.4.1.25651.1.2.3.5.8.4.1.3
This is the status for the corresponding DiffServ table entry.
Status: current Access: read-write
OBJECT-TYPE    
  EnableStatusT  

qosPortETH1Conf 1.3.6.1.4.1.25651.1.2.3.5.8.5
OBJECT IDENTIFIER    

qosEth1m802dot1pList 1.3.6.1.4.1.25651.1.2.3.5.8.5.1
This is a table of Qos 802.1p tag and proiority.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QosEth1m802dot1pEntry

qosEth1m802dot1pEntry 1.3.6.1.4.1.25651.1.2.3.5.8.5.1.1
This is a 802.1p table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  QosEth1m802dot1pEntry  

tagEth1Priority 1.3.6.1.4.1.25651.1.2.3.5.8.5.1.1.1
This is the priority for the corresponding ETH1 802.1p tag entry.
Status: current Access: read-write
OBJECT-TYPE    
  QosPriorityT  

tagEth1Status 1.3.6.1.4.1.25651.1.2.3.5.8.5.1.1.2
This is the status for the corresponding ETH1 802.1p tag entry.
Status: current Access: read-write
OBJECT-TYPE    
  EnableStatusT  

qosEth1PortList 1.3.6.1.4.1.25651.1.2.3.5.8.5.2
This is a table of Qos Port mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QosEth1PortEntry

qosEth1PortEntry 1.3.6.1.4.1.25651.1.2.3.5.8.5.2.1
This is a Port mode table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  QosEth1PortEntry  

portEth1Priority 1.3.6.1.4.1.25651.1.2.3.5.8.5.2.1.1
This is the priority for the corresponding ETH1 Port mode entry.
Status: current Access: read-write
OBJECT-TYPE    
  QosPriorityT  

portEth1Status 1.3.6.1.4.1.25651.1.2.3.5.8.5.2.1.2
This is the status for the corresponding ETH1 Port mode entry.
Status: current Access: read-write
OBJECT-TYPE    
  EnableStatusT  

qosPortETH2Conf 1.3.6.1.4.1.25651.1.2.3.5.8.6
OBJECT IDENTIFIER    

qosEth2m802dot1pList 1.3.6.1.4.1.25651.1.2.3.5.8.6.1
This is a table of Qos 802.1p tag and proiority.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QosEth2m802dot1pEntry

qosEth2m802dot1pEntry 1.3.6.1.4.1.25651.1.2.3.5.8.6.1.1
This is a 802.1p table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  QosEth2m802dot1pEntry  

tagEth2Priority 1.3.6.1.4.1.25651.1.2.3.5.8.6.1.1.1
This is the priority for the corresponding ETH2 802.1p tag entry.
Status: current Access: read-write
OBJECT-TYPE    
  QosPriorityT  

tagEth2Status 1.3.6.1.4.1.25651.1.2.3.5.8.6.1.1.2
This is the status for the corresponding ETH2 802.1p tag entry.
Status: current Access: read-write
OBJECT-TYPE    
  EnableStatusT  

qosEth2PortList 1.3.6.1.4.1.25651.1.2.3.5.8.6.2
This is a table of Qos Port mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QosEth2PortEntry

qosEth2PortEntry 1.3.6.1.4.1.25651.1.2.3.5.8.6.2.1
This is a ETH2 Port mode table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  QosEth2PortEntry  

portEth2Priority 1.3.6.1.4.1.25651.1.2.3.5.8.6.2.1.1
This is the priority for the corresponding ETH2 Port mode entry.
Status: current Access: read-write
OBJECT-TYPE    
  QosPriorityT  

portEth2Status 1.3.6.1.4.1.25651.1.2.3.5.8.6.2.1.2
This is the status for the corresponding ETH2 Port mode entry.
Status: current Access: read-write
OBJECT-TYPE    
  EnableStatusT  

qosScheduleMode 1.3.6.1.4.1.25651.1.2.3.5.8.7.1
The QoS queues scheduler mode
Status: current Access: read-write
OBJECT-TYPE    
  QosScheduleModeT  

qosCos3Weight 1.3.6.1.4.1.25651.1.2.3.5.8.7.2
QoS queue 3 weight.
Status: current Access: read-write
OBJECT-TYPE    
  QosCos3WeightT  

qosCos2Weight 1.3.6.1.4.1.25651.1.2.3.5.8.7.3
QoS queue 2 weight.
Status: current Access: read-write
OBJECT-TYPE    
  QosCos2WeightT  

qosCos1Weight 1.3.6.1.4.1.25651.1.2.3.5.8.7.4
QoS queue 1 weight.
Status: current Access: read-write
OBJECT-TYPE    
  QosCos1WeightT  

qosCos0Weight 1.3.6.1.4.1.25651.1.2.3.5.8.7.5
QoS queue 0 weight.
Status: current Access: read-write
OBJECT-TYPE    
  QosCos0WeightT  

commitQosSettings 1.3.6.1.4.1.25651.1.2.3.5.8.1000
This command allows saving or clear configuration. Options are: save, clear, correspondingly saving changes to configuration to the persistent storage or clearing unsaved changes.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor