RADLAN-MIB

File: RADLAN-MIB.mib (214695 bytes)

Imported modules

RFC1155-SMI RFC-1212 SNMPv2-TC-v1
IF-MIB BRIDGE-MIB P-BRIDGE-MIB
Q-BRIDGE-MIB IEEE8021-PAE-MIB SNMPv2-SMI-v1
SNMP-FRAMEWORK-MIB SNMPv2-SMI

Imported symbols

IpAddress Counter TimeTicks
enterprises OBJECT-TYPE DisplayString
PhysAddress TimeInterval DateAndTime
TruthValue RowStatus RowPointer
InterfaceIndexOrZero InterfaceIndex ifIndex
BridgeId Timeout dot1dBasePort
dot1dBasePortEntry EnabledStatus PortList
dot1xAuthSessionStatsEntry MacAddress Unsigned-32
Counter-32 Integer-32 SnmpAdminString
VlanIndex dot1qFdbId dot1xPaePortNumber
PaeControlledPortStatus Counter32 Counter64
Unsigned32

Defined Types

Percents  
INTEGER 0..100    

NetNumber  
OCTET STRING Size(4)    

VlanPriority  
INTEGER 0..7    

RlStormCtrlRateUnit  
INTEGER packetsPerSecond(1), bytesPerSecond(2), framesPerBuffer(3), precentages(4), kiloBytesPerSecond(5), kiloBitsPerSecond(6)    

RndCommunityEntry  
SEQUENCE    
  rndCommunityMngStationAddr IpAddress
  rndCommunityString DisplayString
  rndCommunityAccess INTEGER
  rndCommunityTrapsEnable INTEGER
  rndCommunityStatus INTEGER
  rndCommunityPortSecurity INTEGER
  rndCommunityOwner DisplayString
  rndCommunityTrapDestPort INTEGER

RlMridEntry  
SEQUENCE    
  rlMridConnection INTEGER
  rlManagedMrid INTEGER

RndActiveSoftwareFileEntry  
SEQUENCE    
  rndUnitNumber INTEGER
  rndActiveSoftwareFile INTEGER
  rndActiveSoftwareFileAfterReset INTEGER

RndImageInfoEntry  
SEQUENCE    
  rndStackUnitNumber INTEGER
  rndImage1Name DisplayString
  rndImage2Name DisplayString
  rndImage1Version DisplayString
  rndImage2Version DisplayString
  rndImage1Date DisplayString
  rndImage2Date DisplayString
  rndImage1Time DisplayString
  rndImage2Time DisplayString

Rldot1dPriorityPortGroupEntry  
SEQUENCE    
  rldot1dPriorityPortGroupNumber INTEGER

Rldot1dStpVlanEntry  
SEQUENCE    
  rldot1dStpVlan INTEGER
  rldot1dStpVlanEnable TruthValue
  rldot1dStpTimeSinceTopologyChange TimeTicks
  rldot1dStpTopChanges Counter
  rldot1dStpDesignatedRoot BridgeId
  rldot1dStpRootCost INTEGER
  rldot1dStpRootPort INTEGER
  rldot1dStpMaxAge Timeout
  rldot1dStpHelloTime Timeout
  rldot1dStpHoldTime INTEGER
  rldot1dStpForwardDelay Timeout

Rldot1dStpVlanPortEntry  
SEQUENCE    
  rldot1dStpVlanPortVlan INTEGER
  rldot1dStpVlanPortPort INTEGER
  rldot1dStpVlanPortPriority INTEGER
  rldot1dStpVlanPortState INTEGER
  rldot1dStpVlanPortEnable INTEGER
  rldot1dStpVlanPortPathCost INTEGER
  rldot1dStpVlanPortDesignatedRoot BridgeId
  rldot1dStpVlanPortDesignatedCost INTEGER
  rldot1dStpVlanPortDesignatedBridge BridgeId
  rldot1dStpVlanPortDesignatedPort OCTET STRING
  rldot1dStpVlanPortForwardTransitions Counter

Rldot1dStpPortEntry  
SEQUENCE    
  rldot1dStpPortPort INTEGER
  rldot1dStpPortDampEnable TruthValue
  rldot1dStpPortDampStable TruthValue
  rldot1dStpPortFilterBpdu TruthValue
  rldot1dStpPortBpduSent Counter-32
  rldot1dStpPortBpduReceived Counter-32
  rldot1dStpPortRole INTEGER
  rldot1dStpBpduType INTEGER
  rldot1dStpPortRestrictedRole TruthValue
  rldot1dStpPortAutoEdgePort TruthValue
  rldot1dStpPortLoopback TruthValue

Rldot1dStpPortBpduGuardEntry  
SEQUENCE    
  rldot1dStpPortBpduGuardEnable TruthValue

Rldot1dStpSeparatedBridgesEntry  
SEQUENCE    
  rldot1dStpSeparatedBridgesPortEnable TruthValue

Rldot1wRStpVlanEdgePortEntry  
SEQUENCE    
  rldot1wRStpVlanEdgePortVlan INTEGER
  rldot1wRStpVlanEdgePortPort INTEGER
  rldot1wRStpEdgePortStatus TruthValue

Rldot1wRStpForceVersionEntry  
SEQUENCE    
  rldot1wRStpForceVersionVlan INTEGER
  rldot1wRStpForceVersionState INTEGER

Rldot1pPriorityMapEntry  
SEQUENCE    
  rldot1pPriorityMapName DisplayString
  rldot1pPriorityMapPriority OCTET STRING
  rldot1pPriorityMapPort PortList
  rldot1pPriorityMapPortList PortList
  rldot1pPriorityMapStatus RowStatus

Rldot1sMstpInstanceEntry  
SEQUENCE    
  rldot1sMstpInstanceId INTEGER
  rldot1sMstpInstanceEnable TruthValue
  rldot1sMstpInstanceTimeSinceTopologyChange TimeTicks
  rldot1sMstpInstanceTopChanges Counter
  rldot1sMstpInstanceDesignatedRoot BridgeId
  rldot1sMstpInstanceRootCost INTEGER
  rldot1sMstpInstanceRootPort INTEGER
  rldot1sMstpInstanceMaxAge Timeout
  rldot1sMstpInstanceHelloTime Timeout
  rldot1sMstpInstanceHoldTime INTEGER
  rldot1sMstpInstanceForwardDelay Timeout
  rldot1sMstpInstancePriority INTEGER
  rldot1sMstpInstanceRemainingHopes INTEGER

Rldot1sMstpInstancePortEntry  
SEQUENCE    
  rldot1sMstpInstancePortMstiId INTEGER
  rldot1sMstpInstancePortPort INTEGER
  rldot1sMstpInstancePortPriority INTEGER
  rldot1sMstpInstancePortState INTEGER
  rldot1sMstpInstancePortEnable INTEGER
  rldot1sMstpInstancePortPathCost INTEGER
  rldot1sMstpInstancePortDesignatedRoot BridgeId
  rldot1sMstpInstancePortDesignatedCost INTEGER
  rldot1sMstpInstancePortDesignatedBridge BridgeId
  rldot1sMstpInstancePortDesignatedPort OCTET STRING
  rldot1sMstpInstancePortForwardTransitions Counter
  rldot1sMStpInstancePortAdminPathCost INTEGER
  rldot1sMStpInstancePortRole INTEGER

Rldot1sMstpVlanEntry  
SEQUENCE    
  rldot1sMstpVlan INTEGER
  rldot1sMstpGroup INTEGER
  rldot1sMstpPendingGroup INTEGER

Rldot1sMstpExtPortEntry  
SEQUENCE    
  rldot1sMstpExtPortPort INTEGER
  rldot1sMstpExtPortInternalOperPathCost INTEGER
  rldot1sMstpExtPortDesignatedRegionalRoot BridgeId
  rldot1sMstpExtPortDesignatedRegionalCost INTEGER
  rldot1sMstpExtPortBoundary TruthValue
  rldot1sMstpExtPortInternalAdminPathCost INTEGER

RlTelnetUsersEntry  
SEQUENCE    
  rlTelnetSessionId INTEGER
  rlTelnetSessionClientAddress IpAddress
  rlTelnetSessionLoginTime DisplayString
  rlTelnetSessionStatus INTEGER

RlArpSpoofingEntry  
SEQUENCE    
  rlArpSpoofingIfIndex InterfaceIndex
  rlArpSpoofingLocalIpAddr IpAddress
  rlArpSpoofingMacAddr PhysAddress
  rlArpSpoofingRemoteIpAddr IpAddress
  rlArpSpoofingOutPhysIfIndex InterfaceIndexOrZero
  rlArpSpoofingStatus RowStatus

RlMirInterfaceEntry  
SEQUENCE    
  rlMirInterfaceIfIndex InterfaceIndex
  rlMirInterfaceMrid INTEGER

RlMirVlanBaseReservedPortsEntry  
SEQUENCE    
  rlMirVlanBaseReservedPortsIfIndex InterfaceIndex
  rlMirVlanBaseReservedPortsStatus RowStatus

RlMirVlanBaseLogicalPortsEntry  
SEQUENCE    
  rlMirVlanBaseLogicalPortsIfIndex InterfaceIndex
  rlMirVlanBaseLogicalPortsReservedIfIndex InterfaceIndex
  rlMirVlanBaseLogicalPortsVlanTag INTEGER
  rlMirVlanBaseLogicalPortsStatus RowStatus

RlPortGvrpTimersEntry  
SEQUENCE    
  rlPortGvrpJoinTime TimeInterval
  rlPortGvrpLeaveTime TimeInterval
  rlPortGvrpLeaveAllTime TimeInterval
  rlPortGvrpOverrideGarp EnabledStatus

RlPortGvrpStatisticsEntry  
SEQUENCE    
  rlPortGvrpStatisticsRJE Counter
  rlPortGvrpStatisticsRJIn Counter
  rlPortGvrpStatisticsREmp Counter
  rlPortGvrpStatisticsRLIn Counter
  rlPortGvrpStatisticsRLE Counter
  rlPortGvrpStatisticsRLA Counter
  rlPortGvrpStatisticsSJE Counter
  rlPortGvrpStatisticsSJIn Counter
  rlPortGvrpStatisticsSEmp Counter
  rlPortGvrpStatisticsSLIn Counter
  rlPortGvrpStatisticsSLE Counter
  rlPortGvrpStatisticsSLA Counter
  rlPortGvrpStatisticsClear INTEGER

RlPortGvrpErrorStatisticsEntry  
SEQUENCE    
  rlPortGvrpErrorStatisticsInvProt Counter
  rlPortGvrpErrorStatisticsInvAtyp Counter
  rlPortGvrpErrorStatisticsInvAval Counter
  rlPortGvrpErrorStatisticsInvPlen Counter
  rlPortGvrpErrorStatisticsInvAlen Counter
  rlPortGvrpErrorStatisticsInvEvent Counter
  rlPortGvrpErrorStatisticsClear INTEGER

RlPortGvrpApplicantStatusEntry  
SEQUENCE    
  rlPortGvrpApplicantStatusValue INTEGER

RlPortGvrpRegistrationModeEntry  
SEQUENCE    
  rlPortGvrpRegistrationModeForbidden TruthValue

RlSwPackageVersionEntry  
SEQUENCE    
  rlSwPackageVersionName DisplayString
  rlSwPackageVersionVesrion DisplayString

RlAggregateVlanEntry  
SEQUENCE    
  rlAggregateVlanIndex InterfaceIndex
  rlAggregateVlanName DisplayString
  rlAggregateVlanPhysAddressType INTEGER
  rlAggregateVlanStatus RowStatus

RlAggregateSubVlanEntry  
SEQUENCE    
  rlAggregateSubVlanIfIndex InterfaceIndex
  rlAggregateSubVlanStatus RowStatus

RlPortGmrpTimersEntry  
SEQUENCE    
  rlPortGmrpJoinTime TimeInterval
  rlPortGmrpLeaveTime TimeInterval
  rlPortGmrpLeaveAllTime TimeInterval
  rlPortGmrpOverrideGarp EnabledStatus

RlGmrpVlanEntry  
SEQUENCE    
  rlGmrpVlanTag INTEGER
  rlGmrpVlanEnable TruthValue

RlDhcpClActionEntry  
SEQUENCE    
  rlDhcpClActionIfIndex InterfaceIndex
  rlDhcpClActionStatus RowStatus
  rlDhcpClActionHostName SnmpAdminString

RlDhcpApprovalWaitingEntry  
SEQUENCE    
  rlDhcpApprovalWaitingIfIndex InterfaceIndex
  rlDhcpApprovalWaitingAddress IpAddress
  rlDhcpApprovalWaitingMask IpAddress
  rlDhcpApprovalWaitingGateway IpAddress

RlDhcpApprovalActionEntry  
SEQUENCE    
  rlDhcpApprovalActionIfIndex InterfaceIndex
  rlDhcpApprovalActionAddress IpAddress
  rlDhcpApprovalActionMask IpAddress
  rlDhcpApprovalActionApprove TruthValue

RlDhcpClCommandEntry  
SEQUENCE    
  rlDhcpClCommandAction INTEGER

RlStormCtrlEntry  
SEQUENCE    
  rlStormCtrlRateType RlStormCtrlRateUnit
  rlStormCtrlUnknownUnicastEnable TruthValue
  rlStormCtrlUnknownUnicastRate Unsigned-32
  rlStormCtrlUnknownMulticastEnable TruthValue
  rlStormCtrlUnknownMulticastRate Unsigned-32
  rlStormCtrlBroadcastEnable TruthValue
  rlStormCtrlBroadcastRate Unsigned-32
  rlStormCtrlMulticastEnable TruthValue
  rlStormCtrlMulticastRate Unsigned-32
  rlStormCtrlSetDefaultRateType TruthValue
  rlStormCtrlSetDefaultUnknownUnicastEnable TruthValue
  rlStormCtrlSetDefaultUnknownUnicastRate TruthValue
  rlStormCtrlSetDefaultUnknownMulticastEnable TruthValue
  rlStormCtrlSetDefaultUnknownMulticastRate TruthValue
  rlStormCtrlSetDefaultBroadcastEnable TruthValue
  rlStormCtrlSetDefaultBroadcastRate TruthValue
  rlStormCtrlSetDefaultMulticastEnable TruthValue
  rlStormCtrlSetDefaultMulticastRate TruthValue

RlStormCtrlGroupEntry  
SEQUENCE    
  rlStormCtrlGroupUnknownUnicastId INTEGER
  rlStormCtrlGroupUnknownMulticastId INTEGER
  rlStormCtrlGroupBroadcastId INTEGER
  rlStormCtrlGroupMulticastId INTEGER

RlPortCopyVlanTaggingEntry  
SEQUENCE    
  rlPortCopyVlanTagging TruthValue

RlSocketEntry  
SEQUENCE    
  rlSocketId INTEGER
  rlSocketType INTEGER
  rlSocketState INTEGER
  rlSocketBlockMode INTEGER
  rlSocketUpTime TimeTicks

RlMD5KeyChainEntry  
SEQUENCE    
  rlMD5KeyChainName DisplayString
  rlMD5KeyChainKeyId INTEGER
  rlMD5KeyChainKeyRowStatus RowStatus

RlMD5KeyEntry  
SEQUENCE    
  rlMD5KeyId INTEGER
  rlMD5Key DisplayString
  rlMD5KeyStartAccept DateAndTime
  rlMD5KeyStartGenerate DateAndTime
  rlMD5KeyStopGenerate DateAndTime
  rlMD5KeyStopAccept DateAndTime
  rlMD5KeyRowStatus RowStatus

Rldot1xExtAuthSessionStatsEntry  
SEQUENCE    
  rlDot1xAuthSessionAuthenticMethod INTEGER

Rldot1xUnAuthenticatedVlanEntry  
SEQUENCE    
  rldot1xUnAuthenticatedVlanStatus RowStatus

Rldot1xAuthenticationPortEntry  
SEQUENCE    
  rldot1xAuthenticationPortMethod INTEGER

Rldot1xAuthMultiStatsEntry  
SEQUENCE    
  rldot1xAuthMultiStatsPortNumber INTEGER
  rldot1xAuthMultiStatsSourceMac MacAddress
  rldot1xAuthMultiEapolFramesRx Counter32
  rldot1xAuthMultiEapolFramesTx Counter32
  rldot1xAuthMultiEapolStartFramesRx Counter32
  rldot1xAuthMultiEapolLogoffFramesRx Counter32
  rldot1xAuthMultiEapolRespIdFramesRx Counter32
  rldot1xAuthMultiEapolRespFramesRx Counter32
  rldot1xAuthMultiEapolReqIdFramesTx Counter32
  rldot1xAuthMultiEapolReqFramesTx Counter32
  rldot1xAuthMultiInvalidEapolFramesRx Counter32
  rldot1xAuthMultiEapLengthErrorFramesRx Counter32

Rldot1xAuthMultiDiagEntry  
SEQUENCE    
  rldot1xAuthMultiDiagPortNumber INTEGER
  rldot1xAuthMultiDiagSourceMac MacAddress
  rldot1xAuthMultiEntersConnecting Counter32
  rldot1xAuthMultiEntersAuthenticating Counter32
  rldot1xAuthMultiAuthSuccessWhileAuthenticating Counter32
  rldot1xAuthMultiAuthFailWhileAuthenticating Counter32
  rldot1xAuthMultiAuthReauthsWhileAuthenticating Counter32
  rldot1xAuthMultiAuthEapStartsWhileAuthenticating Counter32
  rldot1xAuthMultiAuthReauthsWhileAuthenticated Counter32
  rldot1xAuthMultiAuthEapStartsWhileAuthenticated Counter32
  rldot1xAuthMultiBackendResponses Counter32
  rldot1xAuthMultiBackendAccessChallenges Counter32
  rldot1xAuthMultiBackendOtherRequestsToSupplicant Counter32
  rldot1xAuthMultiBackendNonNakResponsesFromSupplicant Counter32
  rldot1xAuthMultiBackendAuthSuccesses Counter32

Rldot1xAuthMultiSessionStatsEntry  
SEQUENCE    
  rldot1xAuthMultiSessionStatsPortNumber INTEGER
  rldot1xAuthMultiSessionStatsSourceMac MacAddress
  rldot1xAuthMultiSessionOctetsRx Counter64
  rldot1xAuthMultiSessionOctetsTx Counter64
  rldot1xAuthMultiSessionFramesRx Counter32
  rldot1xAuthMultiSessionFramesTx Counter32
  rldot1xAuthMultiSessionId SnmpAdminString
  rldot1xAuthMultiSessionTime TimeTicks
  rldot1xAuthMultiSessionUserName SnmpAdminString

Rldot1xAuthMultiConfigEntry  
SEQUENCE    
  rldot1xAuthMultiPortNumber INTEGER
  rldot1xAuthMultiSourceMac MacAddress
  rldot1xAuthMultiPaeState INTEGER
  rldot1xAuthMultiBackendAuthState INTEGER
  rldot1xAuthMultiControlledPortStatus PaeControlledPortStatus

Defined Values

rnd 1.3.6.1.4.1.89
OBJECT IDENTIFIER    

rndNotifications 1.3.6.1.4.1.89.0
All the rnd notifications will reside under this branch as specified in RFC2578 'Structure of Management Information Version 2 (SMIv2)' 8.5
Status: current Access: read-only
OBJECT-IDENTITY    

rndMng 1.3.6.1.4.1.89.1
OBJECT IDENTIFIER    

rndDeviceParams 1.3.6.1.4.1.89.2
OBJECT IDENTIFIER    

rndBridgeType 1.3.6.1.4.1.89.2.1
Identification of the RND bridge type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER reb(1), ceb(2), ceblb(3), xeb(4), xeb1(5), rebsx(6), rtb(7), ltb(8), tre(9), rtre(10), xtb(11), ete(12), rete(13), ielb(30), leb(31), openGate12(32), openGate4(33), ran(34), itlb(35), gatelinx(36), openGate2(37), ogRanTR(38), rdapter(39), ogVan(40), wanGate(41), ogRubE(42), ogRubT(43), wanGateI(44), vGate4(45), lre(46), mrt(47), vGate2(48)  

rndInactiveArpTimeOut 1.3.6.1.4.1.89.2.2
This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rndBridgeAlarm 1.3.6.1.4.1.89.2.3
OBJECT IDENTIFIER    

rndErrorDesc 1.3.6.1.4.1.89.2.3.1
A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rndErrorSeverity 1.3.6.1.4.1.89.2.3.2
The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER info(0), warning(1), error(2), fatal-error(3)  

rndBrgVersion 1.3.6.1.4.1.89.2.4
The bridge version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rndBrgFeatures 1.3.6.1.4.1.89.2.5
A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: TX Block mask bit2: Source Routing Encapulation bit3: SNA/SDLC bit4: Frame Relay bit5: SNMP bit6: LAN Manager bit7: High Performance bit8: Translation Byte2 : bit1: DEC Router bit2: IPX Router bit3: IP Router Byte3 : bit1: Dial Up Backup bit2: COD bit3: FACS bit4: Load Balance bit5: Remote Configuration bit6: RIP 2 bit7: OSPF bit8: IPX RIP/SAP Filter Byte4 : bit1: BootP Server bit2: BootP Client bit3: Compression bit4: V25.bis bit5: ISDN bit6: CODv2 bit7: NSPF bit8: UDP Relay Byte5 bit1:VirtualLAN bit2:Static IP Multicast bit3:IP Redundancy bit4:CCM2 bit5:ISDN Bonding bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 bit8:Improved COD Byte6 bit1: Server Disptacher bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 bit3: PPP bit4: IP Rip Filter -- for Vgate3 bit5: Zero Hop Routing -- for Vgate3 bit6: ISDN Japan bit7: PPP-Security Byte7 bit1: With unmanaged Switch bit2: 2 LANs bit3: OSPF Ver 2.0 bit4: FACS Ver 2.0 bit5: Multiple WEB Farm bit6: Backup Server bit7: Check Connectivity bit8: WSD multiplexing Byte8 bit1: MRT3 bit2: WSD Redundancy bit3: DHCP Server bit4: WSD Connection Limit bit5: WSD Distributed System bit6: WSD Load Report bit7: WSD super farm bit8: RadWiz leased line Byte9 bit1: PPP IP address negotiaton bit2: DNS bit3: Nat bit4: WSD Static proximity bit5: WSD Dynamic proximity bit6: WSD Proxy bit7: WSD Proximity client bit8: MAC Load balancing Byte10 bit1: Unnum Inf bit2: Power Supply redundancy bit3: MRT PPP Compression bit4: ZHR Apolo bit5: Copy port bit6: UDP Relay 2.0 bit7: NVRAM bit8: URL table Byte11 bit1: URL super farm bit2: NAT on LAN bit3: Remote Con bit4: AP5000 bit5: Session tracking bit6: Mirroring bit7: Alias IP bit8: CSD Nat Byte12 bit1: content check bit2: mlb virtual ip bit3: reserved RadLan bit4: csd nat exception bit5: statistics monitor bit6: reserved-for-radware
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

rndBrgLicense 1.3.6.1.4.1.89.2.6
This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

rndIpHost 1.3.6.1.4.1.89.2.7
OBJECT IDENTIFIER    

rndCommunityTable 1.3.6.1.4.1.89.2.7.2
The community table of the agent
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RndCommunityEntry

rndCommunityEntry 1.3.6.1.4.1.89.2.7.2.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RndCommunityEntry  

rndCommunityMngStationAddr 1.3.6.1.4.1.89.2.7.2.1.1
The management station that will be allowed to communicate with the agent IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rndCommunityString 1.3.6.1.4.1.89.2.7.2.1.2
The community string with which the management station will communicate with the agent
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..20)  

rndCommunityAccess 1.3.6.1.4.1.89.2.7.2.1.3
The allowed access to this management station
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2), super(3)  

rndCommunityTrapsEnable 1.3.6.1.4.1.89.2.7.2.1.4
Should the agent send traps to the management station, and what version is required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER snmpV1(1), snmpV2(2), snmpV3(3), trapsDisable(4)  

rndCommunityStatus 1.3.6.1.4.1.89.2.7.2.1.5
The status of this entry. If the status is invalid the community entry will be deleted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), invalid(2)  

rndCommunityPortSecurity 1.3.6.1.4.1.89.2.7.2.1.6
If enabled the device will only receive SNMP messages from the port, through which this NMS is reachable from the device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rndCommunityOwner 1.3.6.1.4.1.89.2.7.2.1.7
The owner of this community
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

rndCommunityTrapDestPort 1.3.6.1.4.1.89.2.7.2.1.8
The transport protocol (usually UDP) port to which traps to the management station represebted by this entry will be sent. The default is the well-known IANA assigned port number for SNMP traps. This object is relevant only if rndCommunityTrapsEnable has a value different from trapsDisable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rlMridTable 1.3.6.1.4.1.89.2.7.3
The MRID related configurations table of the agent
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlMridEntry

rlMridEntry 1.3.6.1.4.1.89.2.7.3.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlMridEntry  

rlMridConnection 1.3.6.1.4.1.89.2.7.3.1.1
The router instance connecting the NMS who accessed the agent through the community table entry corresponding to the keys of this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rlManagedMrid 1.3.6.1.4.1.89.2.7.3.1.2
The router instance currently managed by the NMS who accessed the agent through the community table entry corresponding to the keys of this entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rndManagedTime 1.3.6.1.4.1.89.2.8
The time will be sent in the format hhmmss
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(6)  

rndManagedDate 1.3.6.1.4.1.89.2.9
The date will be sent in the format ddmmyy
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(6)  

rndBaseBootVersion 1.3.6.1.4.1.89.2.10
Defines the boot version of the product.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rndIpHostManagement 1.3.6.1.4.1.89.2.7.4
OBJECT IDENTIFIER    

rndIpHostManagementSupported 1.3.6.1.4.1.89.2.7.4.1
ifindex manage supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rndIpHostManagementIfIndex 1.3.6.1.4.1.89.2.7.4.2
if supported manage , indicate ifindex, if 0 thaen disable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genGroup 1.3.6.1.4.1.89.2.11
OBJECT IDENTIFIER    

genGroupHWVersion 1.3.6.1.4.1.89.2.11.1
Defines the HW version of the product.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genGroupConfigurationSymbol 1.3.6.1.4.1.89.2.11.2
Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1)  

genGroupHWStatus 1.3.6.1.4.1.89.2.11.3
This attribute describes the status of the group hardware as detected by the sensors software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), hardwareProblems(2), notSupported(255)  

rndBasePhysicalAddress 1.3.6.1.4.1.89.2.12
The Base physical (MAC) address of the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

rndSoftwareFile 1.3.6.1.4.1.89.2.13
OBJECT IDENTIFIER    

rndActiveSoftwareFileTable 1.3.6.1.4.1.89.2.13.1
The (conceptual) table listing the active software file of the requested unit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RndActiveSoftwareFileEntry

rndActiveSoftwareFileEntry 1.3.6.1.4.1.89.2.13.1.1
An entry (conceptual row) in the rndActiveSoftwareFileTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RndActiveSoftwareFileEntry  

rndUnitNumber 1.3.6.1.4.1.89.2.13.1.1.1
The unit number (for stackable devices) or 1 for 'stand alone' device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rndActiveSoftwareFile 1.3.6.1.4.1.89.2.13.1.1.2
Indicates the current active software file, image1 or image2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER image1(1), image2(2)  

rndActiveSoftwareFileAfterReset 1.3.6.1.4.1.89.2.13.1.1.3
Indicates the software file that will be active after reset (image1 or image2). If an error occurred in the download process, resulting in the corruption of the single software file, The value 'invalidImage' will be returned. This value can not be set by the user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER image1(1), image2(2), invalidImage(3)  

rndImageSize 1.3.6.1.4.1.89.2.14
Max number of sectors currently allocated for image(s).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rndBackupConfigurationEnabled 1.3.6.1.4.1.89.2.15
Specifies whether the device supports backup-config parameters in lcli commands.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rndImageInfo 1.3.6.1.4.1.89.2.16
OBJECT IDENTIFIER    

rndImageInfoTable 1.3.6.1.4.1.89.2.16.1
The table contains information about images.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RndImageInfoEntry

rndImageInfoEntry 1.3.6.1.4.1.89.2.16.1.1
An entry in the rndImageInfoTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RndImageInfoEntry  

rndStackUnitNumber 1.3.6.1.4.1.89.2.16.1.1.1
The unit number (for stackable devices) or 1 for 'stand alone' device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rndImage1Name 1.3.6.1.4.1.89.2.16.1.1.2
Indicates the file name of image-1 in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rndImage2Name 1.3.6.1.4.1.89.2.16.1.1.3
Indicates the file name of image-2 (if present) in the system.If image-2 is not present show 'no info' text
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rndImage1Version 1.3.6.1.4.1.89.2.16.1.1.4
Indicates the version of image-1 in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rndImage2Version 1.3.6.1.4.1.89.2.16.1.1.5
Indicates the version of image-2 (if present) in the system.If image-2 is not present show 'no info' text
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rndImage1Date 1.3.6.1.4.1.89.2.16.1.1.6
Indicates the compilation date of image-1 in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rndImage2Date 1.3.6.1.4.1.89.2.16.1.1.7
Indicates the compilation date of image-2 (if present) in the system.If image-2 is not present show 'no info' text
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rndImage1Time 1.3.6.1.4.1.89.2.16.1.1.8
Indicates the compilation time of image-1 in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rndImage2Time 1.3.6.1.4.1.89.2.16.1.1.9
Indicates the compilation time of image-2 (if present) in the system.If image-2 is not present show 'no info' text
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rndBootP 1.3.6.1.4.1.89.24
OBJECT IDENTIFIER    

rndBootPServerAddress 1.3.6.1.4.1.89.24.1
The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if this parameter is not equale to 0.0.0.0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rndBootPRelaySecThreshold 1.3.6.1.4.1.89.24.2
BootP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local BootP Servers to answer first.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipSpec 1.3.6.1.4.1.89.26
OBJECT IDENTIFIER    

rsTunning 1.3.6.1.4.1.89.29
OBJECT IDENTIFIER    

rndApplications 1.3.6.1.4.1.89.35
OBJECT IDENTIFIER    

rsUDP 1.3.6.1.4.1.89.42
OBJECT IDENTIFIER    

swInterfaces 1.3.6.1.4.1.89.43
OBJECT IDENTIFIER    

rlIPmulticast 1.3.6.1.4.1.89.46
OBJECT IDENTIFIER    

rlFFT 1.3.6.1.4.1.89.47
OBJECT IDENTIFIER    

vlan 1.3.6.1.4.1.89.48
OBJECT IDENTIFIER    

rlRmonControl 1.3.6.1.4.1.89.49
OBJECT IDENTIFIER    

rlBrgMacSwitch 1.3.6.1.4.1.89.50
OBJECT IDENTIFIER    

rlBrgMacSwVersion 1.3.6.1.4.1.89.50.1
MIB's version, the current version is 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlBrgMacSwMaxTableNumber 1.3.6.1.4.1.89.50.2
Maximum number of MAC Tables supported by the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlBrgMacSwDynamicTables 1.3.6.1.4.1.89.50.3
Specifies whether the device supports port dynamic MAC tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlBrgMacSwOldEntryDeleteMode 1.3.6.1.4.1.89.50.5
The method used to delete old unused entries refresh_flag: The high level sets a flag when it adds or updates an entry, the Switch clears the flag each time, when it learns the station once more. aging_flag: The high level clears a flag when it adds or updates an entry, the Switch sets the flag each time, when it learns the station once more. aging_time: The high level defines a timeout, the Switch sends a message to the high level each time when the station doesn't send messages during interval between timeout and 2*timeout. Boundaries: The Switch doesn't support any mechanism, and the high level uses two boundaries: red and yellow. When the number of entries exceeds the red boundary, the high level deletes the oldest entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER refreshFlag(1), agingFlag(2), agingTime(3), boundaries(4)  

rlBrgMacSwSpanningTree 1.3.6.1.4.1.89.50.6
Specifies whether the device supports port the Spanning Tree Protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlBrgMacSwKeyType 1.3.6.1.4.1.89.50.7
Specified the used MAC Address Table kye format: macOnly: One global MAC Address Table per device (leaky VLANs). tagAndMac: MAC Address Table per each VLAN (strick VLANs).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER macOnly(1), tagAndMac(2)  

rlBrgMacSwYellowBoundary 1.3.6.1.4.1.89.50.8
The yellow boundary.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rlBrgMacSwRedBoundary 1.3.6.1.4.1.89.50.9
The yellow boundary.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rlBrgMacSwTrapEnable 1.3.6.1.4.1.89.50.10
This variable indicates whether to create a SNMP trap if adding dynamic mac failed due to full hash chain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlBrgMacSwOperTrapCount 1.3.6.1.4.1.89.50.11
This variable indicates the trap counter status (i.e. number of received MAC addresses since the last trap sent that haven't been inserted into the hash). It is relevant only when trap is enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlBrgMacSwAdminTrapFrequency 1.3.6.1.4.1.89.50.12
This variable indicates the minimal frequency (in seconds) of sending a trap. It is relevant only when trap is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..86400  

rlExperience 1.3.6.1.4.1.89.51
OBJECT IDENTIFIER    

rlCli 1.3.6.1.4.1.89.52
OBJECT IDENTIFIER    

rlCliMibVersion 1.3.6.1.4.1.89.52.1
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlCliPassword 1.3.6.1.4.1.89.52.2
CLI Password
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

rlCliTimer 1.3.6.1.4.1.89.52.3
CLI Timer
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..3600  

rlCliFileEnable 1.3.6.1.4.1.89.52.4
CLI File Enable/Disable
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rlCliFileEnableAfterReset 1.3.6.1.4.1.89.52.5
CLI File Enable/Disable After Reset
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlPhysicalDescription 1.3.6.1.4.1.89.53
OBJECT IDENTIFIER    

rlIfInterfaces 1.3.6.1.4.1.89.54
OBJECT IDENTIFIER    

rlMacMulticast 1.3.6.1.4.1.89.55
OBJECT IDENTIFIER    

rlGalileo 1.3.6.1.4.1.89.56
OBJECT IDENTIFIER    

rlpBridgeMIBObjects 1.3.6.1.4.1.89.57
OBJECT IDENTIFIER    

rldot1dPriority 1.3.6.1.4.1.89.57.1
OBJECT IDENTIFIER    

rldot1dPriorityMibVersion 1.3.6.1.4.1.89.57.1.1
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1dPriorityPortGroupTable 1.3.6.1.4.1.89.57.1.2
A list of PortGroupNumber for each port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1dPriorityPortGroupEntry

rldot1dPriorityPortGroupEntry 1.3.6.1.4.1.89.57.1.2.1
All ports belonging to a same group have the same User Priority to Traffic Class mapping.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1dPriorityPortGroupEntry  

rldot1dPriorityPortGroupNumber 1.3.6.1.4.1.89.57.1.2.1.1
A group, that port belongs to. All ports belonging to a same group have the same User Priority to Traffic Class mapping.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1dStp 1.3.6.1.4.1.89.57.2
OBJECT IDENTIFIER    

rldot1dStpMibVersion 1.3.6.1.4.1.89.57.2.1
MIB's version, the current version is 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1dStpType 1.3.6.1.4.1.89.57.2.2
Specifies whether the device supports Spanning Tree per device, or per group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER perDevice(1), mstp(4)  

rldot1dStpEnable 1.3.6.1.4.1.89.57.2.3
Enable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dStpPortMustBelongToVlan 1.3.6.1.4.1.89.57.2.4
Specifies whether a port must belong to a VLAN in order to participate in the STP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dStpExtendedPortNumberFormat 1.3.6.1.4.1.89.57.2.5
Specifies whether the STP uses the extended port fnumber format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dStpVlanTable 1.3.6.1.4.1.89.57.2.6
A table that contains vlan-specific information for the Spanning Tree Protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1dStpVlanEntry

rldot1dStpVlanEntry 1.3.6.1.4.1.89.57.2.6.1
A list of information maintained by every Vlan about the Spanning Tree Protocol state for that Vlan.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1dStpVlanEntry  

rldot1dStpVlan 1.3.6.1.4.1.89.57.2.6.1.1
The Vlan index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1dStpVlanEnable 1.3.6.1.4.1.89.57.2.6.1.2
Specifies whether this vlan is STP enable or disable
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dStpTimeSinceTopologyChange 1.3.6.1.4.1.89.57.2.6.1.3
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

rldot1dStpTopChanges 1.3.6.1.4.1.89.57.2.6.1.4
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rldot1dStpDesignatedRoot 1.3.6.1.4.1.89.57.2.6.1.5
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

rldot1dStpRootCost 1.3.6.1.4.1.89.57.2.6.1.6
The cost of the path to the root as seen from this bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1dStpRootPort 1.3.6.1.4.1.89.57.2.6.1.7
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1dStpMaxAge 1.3.6.1.4.1.89.57.2.6.1.8
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

rldot1dStpHelloTime 1.3.6.1.4.1.89.57.2.6.1.9
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

rldot1dStpHoldTime 1.3.6.1.4.1.89.57.2.6.1.10
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1dStpForwardDelay 1.3.6.1.4.1.89.57.2.6.1.11
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

rldot1dStpVlanPortTable 1.3.6.1.4.1.89.57.2.7
A table that contains pair specific information for the Spanning Tree Protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1dStpVlanPortEntry

rldot1dStpVlanPortEntry 1.3.6.1.4.1.89.57.2.7.1
A list of information maintained by every pair about the Spanning Tree Protocol state for that pair.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1dStpVlanPortEntry  

rldot1dStpVlanPortVlan 1.3.6.1.4.1.89.57.2.7.1.1
The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4095  

rldot1dStpVlanPortPort 1.3.6.1.4.1.89.57.2.7.1.2
The port number of the port for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4096  

rldot1dStpVlanPortPriority 1.3.6.1.4.1.89.57.2.7.1.3
The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of rldot1dStpVlanPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

rldot1dStpVlanPortState 1.3.6.1.4.1.89.57.2.7.1.4
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

rldot1dStpVlanPortEnable 1.3.6.1.4.1.89.57.2.7.1.5
The enabled/disabled status of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rldot1dStpVlanPortPathCost 1.3.6.1.4.1.89.57.2.7.1.6
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

rldot1dStpVlanPortDesignatedRoot 1.3.6.1.4.1.89.57.2.7.1.7
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

rldot1dStpVlanPortDesignatedCost 1.3.6.1.4.1.89.57.2.7.1.8
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1dStpVlanPortDesignatedBridge 1.3.6.1.4.1.89.57.2.7.1.9
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

rldot1dStpVlanPortDesignatedPort 1.3.6.1.4.1.89.57.2.7.1.10
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

rldot1dStpVlanPortForwardTransitions 1.3.6.1.4.1.89.57.2.7.1.11
The number of times this port has transitioned from the Learning state to the Forwarding state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rldot1dStpTrapVariable 1.3.6.1.4.1.89.57.2.8
OBJECT IDENTIFIER    

rldot1dStpTrapVrblifIndex 1.3.6.1.4.1.89.57.2.8.1
The ifIndex of port which STP status was changed
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rldot1dStpTrapVrblVID 1.3.6.1.4.1.89.57.2.8.2
The VID of VLAN to which the port belongs which STP status was changed
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1dStpTypeAfterReset 1.3.6.1.4.1.89.57.2.9
New mode of spaning tree supported by the device after the next reset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER perDevice(1), mstp(4)  

rldot1dStpMonitorTime 1.3.6.1.4.1.89.57.2.10
Factor of hello-time during which a port is monotored to determine if it is stable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

rldot1dStpBpduCount 1.3.6.1.4.1.89.57.2.11
The number of bpdu that need to received for the link to be considered stable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

rldot1dStpLastChanged 1.3.6.1.4.1.89.57.2.12
The last time any object in this table was changed by SNMP or other local management means.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

rldot1dStpPortTable 1.3.6.1.4.1.89.57.2.13
A table that contains extended pair port specific information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1dStpPortEntry

rldot1dStpPortEntry 1.3.6.1.4.1.89.57.2.13.1
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1dStpPortEntry  

rldot1dStpPortPort 1.3.6.1.4.1.89.57.2.13.1.1
The port number of the port for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4096  

rldot1dStpPortDampEnable 1.3.6.1.4.1.89.57.2.13.1.2
Specified if dampening is enabled on this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dStpPortDampStable 1.3.6.1.4.1.89.57.2.13.1.3
Specified if the port is stable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1dStpPortFilterBpdu 1.3.6.1.4.1.89.57.2.13.1.4
Specified if this port should filter bpdus when stp is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dStpPortBpduSent 1.3.6.1.4.1.89.57.2.13.1.5
Specified the number of bpdu sent from this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter-32  

rldot1dStpPortBpduReceived 1.3.6.1.4.1.89.57.2.13.1.6
Specified the number of bpdu received in this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter-32  

rldot1dStpPortRole 1.3.6.1.4.1.89.57.2.13.1.7
Specified the role of this this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), disabled(1), alternate(2), backup(3), root(4), designated(5)  

rldot1dStpBpduType 1.3.6.1.4.1.89.57.2.13.1.8
Specified the type of BPDU transmitted by this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER stp(0), rstp(1)  

rldot1dStpPortRestrictedRole 1.3.6.1.4.1.89.57.2.13.1.9
If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even if it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dStpPortAutoEdgePort 1.3.6.1.4.1.89.57.2.13.1.10
If TRUE causes the Port when become up, to enter the blocking state, and if during 3 seconds it doesn't receive a BPDU, it will enter the forwarding state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dStpPortLoopback 1.3.6.1.4.1.89.57.2.13.1.11
Specified loopback was detected on port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1dStpPortsEnable 1.3.6.1.4.1.89.57.2.14
Enable / Disable spanning tree on ports by default .
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1dStpTaggedFlooding 1.3.6.1.4.1.89.57.2.15
flooding can be done in tagged bpdu .
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1dStpPortBelongToVlanDefault 1.3.6.1.4.1.89.57.2.16
The default value of rldot1dStpPortMustBelongToVlan .
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1dStpEnableByDefault 1.3.6.1.4.1.89.57.2.17
The default value of rldot1dStpEnable .
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1dStpPortToDefault 1.3.6.1.4.1.89.57.2.18
To order port/s to revert to default setings .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rldot1dStpSupportedType 1.3.6.1.4.1.89.57.2.19
The type of stp supported by the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER perDevice(1), perVlan(2), mstp(3)  

rldot1dStpEdgeportSupportInStp 1.3.6.1.4.1.89.57.2.20
If EdgePort is supported in stpCompatible mode .
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1dStpFilterBpdu 1.3.6.1.4.1.89.57.2.21
Specified if the device should filter BPDUs when STP is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dStpFloodBpduMethod 1.3.6.1.4.1.89.57.2.22
Specified flooding method: 1 - classic - untagged to all stp disabled ports 2 - bridging -normal bridging.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER classic(0), bridging(1)  

rldot1dStpSeparatedBridges 1.3.6.1.4.1.89.57.2.23
OBJECT IDENTIFIER    

rldot1dStpPortBpduGuardTable 1.3.6.1.4.1.89.57.2.24
A table that contains for each port whether it is bpdu guard .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1dStpPortBpduGuardEntry

rldot1dStpPortBpduGuardEntry 1.3.6.1.4.1.89.57.2.24.1
A list of information maintained by every port whether it is bpdu guard.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1dStpPortBpduGuardEntry  

rldot1dStpPortBpduGuardEnable 1.3.6.1.4.1.89.57.2.24.1.1
Specified if bpdu guard is enabled on this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dStpSeparatedBridgesTable 1.3.6.1.4.1.89.57.2.23.1
Define if separated bridges feature is enabled for each interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1dStpSeparatedBridgesEntry

rldot1dStpSeparatedBridgesEntry 1.3.6.1.4.1.89.57.2.23.1.1
Defines the contents of each line in the rlSeparatedBridgesTable table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1dStpSeparatedBridgesEntry  

rldot1dStpSeparatedBridgesPortEnable 1.3.6.1.4.1.89.57.2.23.1.1.1
This variable indicates whether the separated bridge feature is enabled on a specified ifIndex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dStpSeparatedBridgesEnable 1.3.6.1.4.1.89.57.2.23.2
Enable / Disable Separated Bridges Feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dStpSeparatedBridgesAutoConfig 1.3.6.1.4.1.89.57.2.23.3
Enable / Disable Separated Bridges Automatic Configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1dExtBase 1.3.6.1.4.1.89.57.3
OBJECT IDENTIFIER    

rldot1dExtBaseMibVersion 1.3.6.1.4.1.89.57.3.1
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1dDeviceCapabilities 1.3.6.1.4.1.89.57.3.2
Indicates the optional parts of private extension of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

rldot1wRStp 1.3.6.1.4.1.89.57.4
OBJECT IDENTIFIER    

rldot1wRStpVlanEdgePortTable 1.3.6.1.4.1.89.57.4.1
A table that contains pair specific information for the Rapid Spanning Tree Protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1wRStpVlanEdgePortEntry

rldot1wRStpVlanEdgePortEntry 1.3.6.1.4.1.89.57.4.1.1
A list of information maintained by every pair about the RAPID Spanning Tree Protocol state for that pair.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1wRStpVlanEdgePortEntry  

rldot1wRStpVlanEdgePortVlan 1.3.6.1.4.1.89.57.4.1.1.1
The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..4095 are allowed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4095  

rldot1wRStpVlanEdgePortPort 1.3.6.1.4.1.89.57.4.1.1.2
The port number of the port for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1wRStpEdgePortStatus 1.3.6.1.4.1.89.57.4.1.1.3
Specifies whether this port is an Edge Port or not
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rldot1wRStpForceVersionTable 1.3.6.1.4.1.89.57.4.2
A table that contains specific information for the Rapid Spanning Tree Protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1wRStpForceVersionEntry

rldot1wRStpForceVersionEntry 1.3.6.1.4.1.89.57.4.2.1
A list of information maintained by every about the RAPID Spanning Tree Protocol state for that pair.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1wRStpForceVersionEntry  

rldot1wRStpForceVersionVlan 1.3.6.1.4.1.89.57.4.2.1.1
The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..4095 are allowed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4095  

rldot1wRStpForceVersionState 1.3.6.1.4.1.89.57.4.2.1.2
Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rldot1pPriorityMap 1.3.6.1.4.1.89.57.5
OBJECT IDENTIFIER    

rldot1pPriorityMapState 1.3.6.1.4.1.89.57.5.1
enable / disable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rldot1pPriorityMapTable 1.3.6.1.4.1.89.57.5.2
This table hold information the priority maps
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1pPriorityMapEntry

rldot1pPriorityMapEntry 1.3.6.1.4.1.89.57.5.2.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1pPriorityMapEntry  

rldot1pPriorityMapName 1.3.6.1.4.1.89.57.5.2.1.1
The map name
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..25)  

rldot1pPriorityMapPriority 1.3.6.1.4.1.89.57.5.2.1.2
The map holding the queue
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

rldot1pPriorityMapPort 1.3.6.1.4.1.89.57.5.2.1.3
the port that the map, is applied on in config
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortList  

rldot1pPriorityMapPortList 1.3.6.1.4.1.89.57.5.2.1.4
the ports that the map, is applied on in actual
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortList  

rldot1pPriorityMapStatus 1.3.6.1.4.1.89.57.5.2.1.5
The status of the table entry. It's used to delete an entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

rldot1sMstp 1.3.6.1.4.1.89.57.6
OBJECT IDENTIFIER    

rldot1sMstpInstanceTable 1.3.6.1.4.1.89.57.6.1
A table that contains Mstp instance specific information for the Multiple Spanning Tree Protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1sMstpInstanceEntry

rldot1sMstpInstanceEntry 1.3.6.1.4.1.89.57.6.1.1
A list of information maintained by every instance about the multiple Spanning Tree Protocol state for that instance.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1sMstpInstanceEntry  

rldot1sMstpInstanceId 1.3.6.1.4.1.89.57.6.1.1.1
The Instance index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

rldot1sMstpInstanceEnable 1.3.6.1.4.1.89.57.6.1.1.2
Specifies whether this Instance is STP enable or disable
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1sMstpInstanceTimeSinceTopologyChange 1.3.6.1.4.1.89.57.6.1.1.3
The time (in hundredths of a second) since the last time a topology change was detected by the Mstp Instance .
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

rldot1sMstpInstanceTopChanges 1.3.6.1.4.1.89.57.6.1.1.4
The total number of topology changes detected by this Instance since the management entity was last reset or initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rldot1sMstpInstanceDesignatedRoot 1.3.6.1.4.1.89.57.6.1.1.5
The bridge identifier of the root of the spanning tree as determined by the Muliple Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

rldot1sMstpInstanceRootCost 1.3.6.1.4.1.89.57.6.1.1.6
The cost of the path to the root as seen from this bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1sMstpInstanceRootPort 1.3.6.1.4.1.89.57.6.1.1.7
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1sMstpInstanceMaxAge 1.3.6.1.4.1.89.57.6.1.1.8
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

rldot1sMstpInstanceHelloTime 1.3.6.1.4.1.89.57.6.1.1.9
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

rldot1sMstpInstanceHoldTime 1.3.6.1.4.1.89.57.6.1.1.10
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1sMstpInstanceForwardDelay 1.3.6.1.4.1.89.57.6.1.1.11
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

rldot1sMstpInstancePriority 1.3.6.1.4.1.89.57.6.1.1.12
The value of the write-able portion of the Bridge ID, i.e., the first four bits of the first octet of the (8 octet long) Bridge ID.The value is a product of 4096. The next 12 bit are the msti id . The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..61440  

rldot1sMstpInstanceRemainingHopes 1.3.6.1.4.1.89.57.6.1.1.13
This count value determines the amount of hopes the information transmited by this bridge on this instance can travel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1sMstpInstancePortTable 1.3.6.1.4.1.89.57.6.2
A table that contains pair specific information for the Spanning Tree Protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1sMstpInstancePortEntry

rldot1sMstpInstancePortEntry 1.3.6.1.4.1.89.57.6.2.1
A list of information maintained by every pair about the Spanning Tree Protocol state for that pair.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1sMstpInstancePortEntry  

rldot1sMstpInstancePortMstiId 1.3.6.1.4.1.89.57.6.2.1.1
The Vlan group number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

rldot1sMstpInstancePortPort 1.3.6.1.4.1.89.57.6.2.1.2
The port number of the port for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4096  

rldot1sMstpInstancePortPriority 1.3.6.1.4.1.89.57.6.2.1.3
The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The value is a product of 16. The other octet of the Port ID is given by the value of rldot1dStpVlanGroupPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..240  

rldot1sMstpInstancePortState 1.3.6.1.4.1.89.57.6.2.1.4
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

rldot1sMstpInstancePortEnable 1.3.6.1.4.1.89.57.6.2.1.5
The enabled/disabled status of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rldot1sMstpInstancePortPathCost 1.3.6.1.4.1.89.57.6.2.1.6
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..200000000  

rldot1sMstpInstancePortDesignatedRoot 1.3.6.1.4.1.89.57.6.2.1.7
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

rldot1sMstpInstancePortDesignatedCost 1.3.6.1.4.1.89.57.6.2.1.8
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1sMstpInstancePortDesignatedBridge 1.3.6.1.4.1.89.57.6.2.1.9
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

rldot1sMstpInstancePortDesignatedPort 1.3.6.1.4.1.89.57.6.2.1.10
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

rldot1sMstpInstancePortForwardTransitions 1.3.6.1.4.1.89.57.6.2.1.11
The number of times this port has transitioned from the Learning state to the Forwarding state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rldot1sMStpInstancePortAdminPathCost 1.3.6.1.4.1.89.57.6.2.1.12
The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost, which returns the operational value of the path cost.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..200000000  

rldot1sMStpInstancePortRole 1.3.6.1.4.1.89.57.6.2.1.13
Specify the role of this this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), disabled(1), alternate(2), backup(3), root(4), designated(5), master(6)  

rldot1sMstpMaxHopes 1.3.6.1.4.1.89.57.6.3
Max number of hopes that an MST BPDU will travel inside a region.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..40  

rldot1sMstpConfigurationName 1.3.6.1.4.1.89.57.6.4
The active configuration name as will be caried in MST BPDU's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

rldot1sMstpRevisionLevel 1.3.6.1.4.1.89.57.6.5
The active revision level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

rldot1sMstpVlanTable 1.3.6.1.4.1.89.57.6.6
A table that contains information about the alocation of vlans to groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1sMstpVlanEntry

rldot1sMstpVlanEntry 1.3.6.1.4.1.89.57.6.6.1
A list of information maintained by every vlan about the group it belongs to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1sMstpVlanEntry  

rldot1sMstpVlan 1.3.6.1.4.1.89.57.6.6.1.1
The vlan number of the vlan for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

rldot1sMstpGroup 1.3.6.1.4.1.89.57.6.6.1.2
Specifid the active group number this vlan belonges to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..64  

rldot1sMstpPendingGroup 1.3.6.1.4.1.89.57.6.6.1.3
Specifid the pending group number this vlan belonges to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..64  

rldot1sMstpExtPortTable 1.3.6.1.4.1.89.57.6.7
A table that contains MSTP information about ports of the CIST.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1sMstpExtPortEntry

rldot1sMstpExtPortEntry 1.3.6.1.4.1.89.57.6.7.1
A list of information maintained by every port of the CIST.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1sMstpExtPortEntry  

rldot1sMstpExtPortPort 1.3.6.1.4.1.89.57.6.7.1.1
The port number of the port for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4096  

rldot1sMstpExtPortInternalOperPathCost 1.3.6.1.4.1.89.57.6.7.1.2
The contribution of this port to the path cost of paths towards the spanning tree regional root which include this port. 802.1S-2002 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..200000000  

rldot1sMstpExtPortDesignatedRegionalRoot 1.3.6.1.4.1.89.57.6.7.1.3
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

rldot1sMstpExtPortDesignatedRegionalCost 1.3.6.1.4.1.89.57.6.7.1.4
The regional path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1sMstpExtPortBoundary 1.3.6.1.4.1.89.57.6.7.1.5
Indication if the port is conented to to a lan segment outside or inside the region.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1sMstpExtPortInternalAdminPathCost 1.3.6.1.4.1.89.57.6.7.1.6
The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost, which returns the operational value of the path cost.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..200000000  

rldot1sMstpDesignatedMaxHopes 1.3.6.1.4.1.89.57.6.8
Max number of hopes that an MST BPDU will travel inside a region.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..40  

rldot1sMstpRegionalRoot 1.3.6.1.4.1.89.57.6.9
CIST Regional Root Identifier (13.16.4). The Bridge Identifier of the current CIST Regional Root.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

rldot1sMstpRegionalRootCost 1.3.6.1.4.1.89.57.6.10
The CIST path cost from the transmitting Bridge to the CIST Regional Root.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1sMstpPendingConfigurationName 1.3.6.1.4.1.89.57.6.11
The pending configuration name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

rldot1sMstpPendingRevisionLevel 1.3.6.1.4.1.89.57.6.12
The pending revision level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rldot1sMstpPendingAction 1.3.6.1.4.1.89.57.6.13
The action to be done with the pending configuration. copyPendingActive - to copy the pending mst configuration to the active one. copyActivePending - to copy the active mst configuration to the pending one.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER copyPendingActive(1), copyActivePending(2)  

rldot1sMstpRemainingHops 1.3.6.1.4.1.89.57.6.14
This count value determines the amount of hops the information transmitted by this bridge can travel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1dTpAgingTime 1.3.6.1.4.1.89.57.7
OBJECT IDENTIFIER    

rldot1dTpAgingTimeMin 1.3.6.1.4.1.89.57.7.1
The min timeout period in seconds for aging out dynamically learned forwarding information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1dTpAgingTimeMax 1.3.6.1.4.1.89.57.7.2
The max timeout period in seconds for aging out dynamically learned forwarding information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlTelnet 1.3.6.1.4.1.89.58
OBJECT IDENTIFIER    

rlTelnetMibVersion 1.3.6.1.4.1.89.58.1
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlTelnetPassword 1.3.6.1.4.1.89.58.2
Telnet Password
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

rlTelnetTimeout 1.3.6.1.4.1.89.58.3
The number of minutes after which the TCP connection is closed if no activity is detected from the Client
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rlTelnetUsersTable 1.3.6.1.4.1.89.58.4
This table hold information about current telnet sessions
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlTelnetUsersEntry

rlTelnetUsersEntry 1.3.6.1.4.1.89.58.4.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlTelnetUsersEntry  

rlTelnetSessionId 1.3.6.1.4.1.89.58.4.1.1
Telnet Session ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlTelnetSessionClientAddress 1.3.6.1.4.1.89.58.4.1.2
Telnet Session Client IP address
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rlTelnetSessionLoginTime 1.3.6.1.4.1.89.58.4.1.3
Telnet Session Login Time string
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rlTelnetSessionStatus 1.3.6.1.4.1.89.58.4.1.4
Telnet Session status. After status has been set to diconnect the sessions is closed and the matching entry is deleted from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER connected(1), disconnect(2)  

rlTelnetLoginBanner 1.3.6.1.4.1.89.58.5
Telnet Login Banner. When telnet connection is established, the banner is the concatanation of this MIB and rlTelnetSecondLoginBanner.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rlTelnetSecondLoginBanner 1.3.6.1.4.1.89.58.6
Telnet Login Banner Extension. When telnet connection is established, the banner is the concatanation of rlTelnetLoginBanner and this MIB
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rlPolicy 1.3.6.1.4.1.89.59
OBJECT IDENTIFIER    

rlArpSpoofing 1.3.6.1.4.1.89.60
OBJECT IDENTIFIER    

rlArpSpoofingMibVersion 1.3.6.1.4.1.89.60.1
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlArpSpoofingTable 1.3.6.1.4.1.89.60.2
A list of the ifIndexes, IP addresses and corresponding MAC addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlArpSpoofingEntry

rlArpSpoofingEntry 1.3.6.1.4.1.89.60.2.1
An entry of this table specifis ifIndex,IP Address and MAC address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlArpSpoofingEntry  

rlArpSpoofingIfIndex 1.3.6.1.4.1.89.60.2.1.1
The physical interface for which this entry contains information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

rlArpSpoofingLocalIpAddr 1.3.6.1.4.1.89.60.2.1.2
Ip addres for which the device will send ARP reply (ARP spoofing).
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rlArpSpoofingMacAddr 1.3.6.1.4.1.89.60.2.1.3
MAC addres with which the device will send ARP reply. If the field is ommited or its value 0.0.0.0 the device will send with the interface's MAC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

rlArpSpoofingRemoteIpAddr 1.3.6.1.4.1.89.60.2.1.4
Ip addres for which the device will send periodically ARP requests if its value differs from 0.0.0.0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rlArpSpoofingOutPhysIfIndex 1.3.6.1.4.1.89.60.2.1.5
The physical interface to which the device will send periodically ARP requests if its value differs from 0. If its value is 0 then ARP requests will send to all the VLAN's ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  InterfaceIndexOrZero  

rlArpSpoofingStatus 1.3.6.1.4.1.89.60.2.1.6
It is used to insert, update or delete an entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

rlMir 1.3.6.1.4.1.89.61
OBJECT IDENTIFIER    

rlMirMibVersion 1.3.6.1.4.1.89.61.1
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlMirMaxNumOfMRIsAfterReset 1.3.6.1.4.1.89.61.2
The maximun instanses of IP Multi Instance Routers after the following reset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rlMirMaxNumOfMRIs 1.3.6.1.4.1.89.61.3
The maximun instanses of IP Multi Instance Routers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlMirCurMriNum 1.3.6.1.4.1.89.61.4
The number of the MRI of which MIB variables are treated at the same time by the SNMP agent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rlMirInterfaceTable 1.3.6.1.4.1.89.61.5
A list of the assignment ifinterfaces to IP Router instances.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlMirInterfaceEntry

rlMirInterfaceEntry 1.3.6.1.4.1.89.61.5.1
An entry of this table specifies the MRID assignement to a L2 interfrace.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlMirInterfaceEntry  

rlMirInterfaceIfIndex 1.3.6.1.4.1.89.61.5.1.1
The L2 interface for which this entry contains information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

rlMirInterfaceMrid 1.3.6.1.4.1.89.61.5.1.2
Multi IP Router Instance Identifier to which the interface is assgned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rlMirVlanBaseReservedPortsTable 1.3.6.1.4.1.89.61.6
A list VLAN based reserved physical ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlMirVlanBaseReservedPortsEntry

rlMirVlanBaseReservedPortsEntry 1.3.6.1.4.1.89.61.6.1
A VLAN based reserved physical port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlMirVlanBaseReservedPortsEntry  

rlMirVlanBaseReservedPortsIfIndex 1.3.6.1.4.1.89.61.6.1.1
IfIndex of VLAN based reserved physical port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

rlMirVlanBaseReservedPortsStatus 1.3.6.1.4.1.89.61.6.1.2
It is used to delete an entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

rlMirVlanBaseLogicalPortsTable 1.3.6.1.4.1.89.61.7
A list VLAN based logical ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlMirVlanBaseLogicalPortsEntry

rlMirVlanBaseLogicalPortsEntry 1.3.6.1.4.1.89.61.7.1
A VLAN based logical point-to-point port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlMirVlanBaseLogicalPortsEntry  

rlMirVlanBaseLogicalPortsIfIndex 1.3.6.1.4.1.89.61.7.1.1
IfIndex of VLAN based Logical point-to-point port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

rlMirVlanBaseLogicalPortsReservedIfIndex 1.3.6.1.4.1.89.61.7.1.2
IfIndex of VLAN based reserved physical port on which the logical port is defined.
Status: mandatory Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

rlMirVlanBaseLogicalPortsVlanTag 1.3.6.1.4.1.89.61.7.1.3
VLAN tag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4095  

rlMirVlanBaseLogicalPortsStatus 1.3.6.1.4.1.89.61.7.1.4
It is used to add, update and delete an entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

rlIpMRouteStdMIB 1.3.6.1.4.1.89.62
OBJECT IDENTIFIER    

rl3sw2swTables 1.3.6.1.4.1.89.63
OBJECT IDENTIFIER    

rl3sw2swTablesPollingInterval 1.3.6.1.4.1.89.63.1
The polling interval for dynamic 3SW/2SW tables in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rlGvrp 1.3.6.1.4.1.89.64
OBJECT IDENTIFIER    

rlPortGvrpTimersTable 1.3.6.1.4.1.89.64.1
A table of GVRP timer values for every bridge port. This is indexed by dot1dBasePort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlPortGvrpTimersEntry

rlPortGvrpTimersEntry 1.3.6.1.4.1.89.64.1.1
GVRP timer values for a bridge port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlPortGvrpTimersEntry  

rlPortGvrpJoinTime 1.3.6.1.4.1.89.64.1.1.1
The GVRP Join time, in centiseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeInterval  

rlPortGvrpLeaveTime 1.3.6.1.4.1.89.64.1.1.2
The GVRP Leave time, in centiseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeInterval  

rlPortGvrpLeaveAllTime 1.3.6.1.4.1.89.64.1.1.3
The GVRP LeaveAll time, in centiseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeInterval  

rlPortGvrpOverrideGarp 1.3.6.1.4.1.89.64.1.1.4
If enabled{1}, GVRP timer values for this port are determined by the values in this entry. Otherwise, they are determined by the values in dot1dPortGarpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

rlGvrpSupported 1.3.6.1.4.1.89.64.2
Is GVRP supported in this device or not
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rlGvrpMibVersion 1.3.6.1.4.1.89.64.3
MIB's version, the current version is 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlPortGvrpStatisticsTable 1.3.6.1.4.1.89.64.4
A table of GVRP statistics values for every bridge port. This is indexed by dot1dBasePort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlPortGvrpStatisticsEntry

rlPortGvrpStatisticsEntry 1.3.6.1.4.1.89.64.4.1
GVRP statistics values for a bridge port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlPortGvrpStatisticsEntry  

rlPortGvrpStatisticsRJE 1.3.6.1.4.1.89.64.4.1.1
The number of Join Empty Received on the port, since the last clearance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpStatisticsRJIn 1.3.6.1.4.1.89.64.4.1.2
The number of Join In Received on the port, since the last clearance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpStatisticsREmp 1.3.6.1.4.1.89.64.4.1.3
The number of Empty Received on the port, since the last clearance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpStatisticsRLIn 1.3.6.1.4.1.89.64.4.1.4
The number of Leave In Received on the port, since the last clearance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpStatisticsRLE 1.3.6.1.4.1.89.64.4.1.5
The number of Leave Empty Received on the port, since the last clearance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpStatisticsRLA 1.3.6.1.4.1.89.64.4.1.6
The number of Leave All Received on the port, since the last clearance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpStatisticsSJE 1.3.6.1.4.1.89.64.4.1.7
The number of Join Empty Sent on the port, since the last clearance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpStatisticsSJIn 1.3.6.1.4.1.89.64.4.1.8
The number of Join In Sent on the port, since the last clearance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpStatisticsSEmp 1.3.6.1.4.1.89.64.4.1.9
The number of Empty Sent on the port, since the last clearance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpStatisticsSLIn 1.3.6.1.4.1.89.64.4.1.10
The number of Leave In Sent on the port, since the last clearance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpStatisticsSLE 1.3.6.1.4.1.89.64.4.1.11
The number of Leave Empty Sent on the port, since the last clearance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpStatisticsSLA 1.3.6.1.4.1.89.64.4.1.12
The number of Leave All Sent on the port, since the last clearance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpStatisticsClear 1.3.6.1.4.1.89.64.4.1.13
activate - the signal/trigger to clear ALL the rlPortGvrpStatisticsEntry's fields. passive - specify that the rlPortGvrpStatisticsClear field is not activate, or finshed the clearnce process. the rlPortGvrpStatisticsClear return automatically to passive after it was activate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER activate(1), passive(2)  

rlPortGvrpErrorStatisticsTable 1.3.6.1.4.1.89.64.5
A table of GVRP ErrorStatistics values for every bridge port. This is indexed by dot1dBasePort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlPortGvrpErrorStatisticsEntry

rlPortGvrpErrorStatisticsEntry 1.3.6.1.4.1.89.64.5.1
GVRP ErrorStatistics values for a bridge port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlPortGvrpErrorStatisticsEntry  

rlPortGvrpErrorStatisticsInvProt 1.3.6.1.4.1.89.64.5.1.1
The number of Invalid Protocol Id encountered by the GVRP port. (since the last clearance)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpErrorStatisticsInvAtyp 1.3.6.1.4.1.89.64.5.1.2
The number of Invalid Attribute Type encountered by the GVRP port. (since the last clearance)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpErrorStatisticsInvAval 1.3.6.1.4.1.89.64.5.1.3
The number of Invalid Attribute Value encountered by the GVRP port. (since the last clearance)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpErrorStatisticsInvPlen 1.3.6.1.4.1.89.64.5.1.4
The number of Invalid PDU Length encountered by the GVRP port. (since the last clearance)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpErrorStatisticsInvAlen 1.3.6.1.4.1.89.64.5.1.5
The number of Invalid Attribute Length encountered by the GVRP port. (since the last clearance)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpErrorStatisticsInvEvent 1.3.6.1.4.1.89.64.5.1.6
The number of Invalid Event encountered by the GVRP port. (since the last clearance)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rlPortGvrpErrorStatisticsClear 1.3.6.1.4.1.89.64.5.1.7
activate - the signal/trigger to clear ALL the rlPortGvrpErrorStatisticsEntry's fields. passive - specify that the rlPortGvrpErrorStatisticsClear field is not activate, or finshed the clearnce process. the rlPortGvrpErrorStatisticsClear return automatically to passive after it was activate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER activate(1), passive(2)  

rlPortGvrpApplicantStatusTable 1.3.6.1.4.1.89.64.6
A table of GVRP Applicant Status values for every bridge port. This is indexed by dot1dBasePort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlPortGvrpApplicantStatusEntry

rlPortGvrpApplicantStatusEntry 1.3.6.1.4.1.89.64.6.1
GVRP Applicant Status value for a bridge port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlPortGvrpApplicantStatusEntry  

rlPortGvrpApplicantStatusValue 1.3.6.1.4.1.89.64.6.1.1
participant - the Gvrp enabled port sending GARP PDUs. nonParticipant - preventing the Gvrp enabled port from sending GARP PDUs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER participant(1), nonParticipant(2)  

rlPortGvrpRegistrationModeTable 1.3.6.1.4.1.89.64.8
A table of GVRP Registration Mode values for every bridge port. This is indexed by dot1dBasePort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlPortGvrpRegistrationModeEntry

rlPortGvrpRegistrationModeEntry 1.3.6.1.4.1.89.64.8.1
GVRP Registration Mode value for a bridge port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlPortGvrpRegistrationModeEntry  

rlPortGvrpRegistrationModeForbidden 1.3.6.1.4.1.89.64.8.1.1
true - deregisters all VLANS on the specified port and prevents any VLAN creation or registration on that port. false - the registration operation on this port behaves normally.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlDot3adAgg 1.3.6.1.4.1.89.65
OBJECT IDENTIFIER    

rlEmbWeb 1.3.6.1.4.1.89.66
OBJECT IDENTIFIER    

rlSwPackageVersion 1.3.6.1.4.1.89.67
OBJECT IDENTIFIER    

rlSwPackageVersionTable 1.3.6.1.4.1.89.67.1
The table listing the current versions of packages that are included in the running software.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlSwPackageVersionEntry

rlSwPackageVersionEntry 1.3.6.1.4.1.89.67.1.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlSwPackageVersionEntry  

rlSwPackageVersionName 1.3.6.1.4.1.89.67.1.1.1
The Package name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..20)  

rlSwPackageVersionVesrion 1.3.6.1.4.1.89.67.1.1.2
The Package version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..20)  

rlBroadcom 1.3.6.1.4.1.89.68
OBJECT IDENTIFIER    

rlMultiSessionTerminal 1.3.6.1.4.1.89.69
OBJECT IDENTIFIER    

rlTerminalDebugModePassword 1.3.6.1.4.1.89.69.1
When a user wants to change the terminal mode from debug mode to ASCII he must enter this password first
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

rlRCli 1.3.6.1.4.1.89.70
OBJECT IDENTIFIER    

rlRCliMibVersion 1.3.6.1.4.1.89.70.1
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlRCliUserPassword 1.3.6.1.4.1.89.70.2
RCLI User mode Password
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

rlRCliEnablePassword 1.3.6.1.4.1.89.70.3
RCLI Enable mode Password
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

rlRCliConfigPassword 1.3.6.1.4.1.89.70.4
RCLI Config mode Password
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

rlRCliTimer 1.3.6.1.4.1.89.70.5
RCLI Timeout
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..3600  

rlRcliFileAction 1.3.6.1.4.1.89.70.6
RCLI Configuration File action determines whether The device configuration after reset will be set by the configuration file content or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notUsedAfterReset(1), usedAfterReset(2)  

rlBgp 1.3.6.1.4.1.89.71
OBJECT IDENTIFIER    

rlAgentsCapabilitiesGroups 1.3.6.1.4.1.89.72
OBJECT IDENTIFIER    

rlAggregateVlan 1.3.6.1.4.1.89.73
OBJECT IDENTIFIER    

rlAggregateVlanMibVersion 1.3.6.1.4.1.89.73.1
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlAggregateVlanTable 1.3.6.1.4.1.89.73.2
The table creates an aggregateVlans, the IfIndex is from 10000
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlAggregateVlanEntry

rlAggregateVlanEntry 1.3.6.1.4.1.89.73.2.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlAggregateVlanEntry  

rlAggregateVlanIndex 1.3.6.1.4.1.89.73.2.1.1
This index indicate the aggrigateVlan id, the aggregate vlan index is starting from 10000
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

rlAggregateVlanName 1.3.6.1.4.1.89.73.2.1.2
The name of the aggregateVlan
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

rlAggregateVlanPhysAddressType 1.3.6.1.4.1.89.73.2.1.3
This variable indicates whether the physical address assigned to this VLAN should be the default one or be chosen from the set of reserved physical addresses of the device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default(1), reserve(2)  

rlAggregateVlanStatus 1.3.6.1.4.1.89.73.2.1.4
The status of the aggregateVlan table entry. It's used to delete an entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

rlAggregateSubVlanTable 1.3.6.1.4.1.89.73.3
The table indicates all the allocated sub-vlans to the aggregateVlans, an entry in the rlAggregateVlanTable must be exist before allocating the subVlans
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlAggregateSubVlanEntry

rlAggregateSubVlanEntry 1.3.6.1.4.1.89.73.3.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlAggregateSubVlanEntry  

rlAggregateSubVlanIfIndex 1.3.6.1.4.1.89.73.3.1.1
Indicate the subVlan that allocated to the aggregate vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rlAggregateSubVlanStatus 1.3.6.1.4.1.89.73.3.1.2
The status of the aggregateSubVlan table entry. It's used to delete an entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

rlAggregateVlanArpProxy 1.3.6.1.4.1.89.73.4
When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on different sub-vlans, which belong to the same Super VLAN.The router responds with its own MAC address. When ARP Proxy is disabled, the router responds only to ARP requests for its own IP addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rlGmrp 1.3.6.1.4.1.89.75
OBJECT IDENTIFIER    

rlGmrpSupported 1.3.6.1.4.1.89.75.1
Is Gmrp supported in the device or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rlGmrpMibVersion 1.3.6.1.4.1.89.75.2
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlPortGmrpTimersTable 1.3.6.1.4.1.89.75.3
A table of Gmrp timer values for every bridge port. This is indexed by dot1dBasePort.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlPortGmrpTimersEntry

rlPortGmrpTimersEntry 1.3.6.1.4.1.89.75.3.1
Gmrp timer values for a bridge port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlPortGmrpTimersEntry  

rlPortGmrpJoinTime 1.3.6.1.4.1.89.75.3.1.1
The Gmrp Join time, in centiseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeInterval  

rlPortGmrpLeaveTime 1.3.6.1.4.1.89.75.3.1.2
The Gmrp Leave time, in centiseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeInterval  

rlPortGmrpLeaveAllTime 1.3.6.1.4.1.89.75.3.1.3
The Gmrp LeaveAll time, in centiseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeInterval  

rlPortGmrpOverrideGarp 1.3.6.1.4.1.89.75.3.1.4
If enabled{1}, Gmrp timer values for this port are determined by the values in this entry. Otherwise, they are determined by the values in dot1dPortGarpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

rlGmrpVlanTable 1.3.6.1.4.1.89.75.4
This table is to Enable/Disable Gmrp in the vlan.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlGmrpVlanEntry

rlGmrpVlanEntry 1.3.6.1.4.1.89.75.4.1
An entry in the rlGmrpVlanTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlGmrpVlanEntry  

rlGmrpVlanTag 1.3.6.1.4.1.89.75.4.1.1
The tag of the VLAN for which this entry contains information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlGmrpVlanEnable 1.3.6.1.4.1.89.75.4.1.2
Enable/Disable Gmrp in the vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlDhcpCl 1.3.6.1.4.1.89.76
OBJECT IDENTIFIER    

rlDhcpClActionTable 1.3.6.1.4.1.89.76.3
The (conceptual) table mentione IP address which must be released/renewed on the interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlDhcpClActionEntry

rlDhcpClActionEntry 1.3.6.1.4.1.89.76.3.1
An entry (conceptual row) in dhcpClActionTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlDhcpClActionEntry  

rlDhcpClActionIfIndex 1.3.6.1.4.1.89.76.3.1.1
The interface which the action is implemented for or NULL if it implemented for all device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rlDhcpClActionStatus 1.3.6.1.4.1.89.76.3.1.2
The status of this entry. Creating the entry renewing Dhcp address on the interface; destroying the entry release Dhcp address on the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

rlDhcpClActionHostName 1.3.6.1.4.1.89.76.3.1.3
This option specifies the name of the client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

rlDhcpApprovalEnabled 1.3.6.1.4.1.89.76.4
DHCP Approval feature status - enable (True) or desable (False). Must be True only if DHCP Approval supported, device has only one ip interface and default ip exist.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rlDhcpApprovalWaitingTable 1.3.6.1.4.1.89.76.5
IP addresses waiting for approval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlDhcpApprovalWaitingEntry

rlDhcpApprovalWaitingEntry 1.3.6.1.4.1.89.76.5.1
An entry in rlDhcpApprovalWaitingTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlDhcpApprovalWaitingEntry  

rlDhcpApprovalWaitingIfIndex 1.3.6.1.4.1.89.76.5.1.1
IP interface ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rlDhcpApprovalWaitingAddress 1.3.6.1.4.1.89.76.5.1.2
IP Address waiting for approval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rlDhcpApprovalWaitingMask 1.3.6.1.4.1.89.76.5.1.3
Mask waiting for approval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rlDhcpApprovalWaitingGateway 1.3.6.1.4.1.89.76.5.1.4
Default gateway of received address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rlDhcpApprovalActionTable 1.3.6.1.4.1.89.76.6
Action for waiting ip address (approve/decline).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlDhcpApprovalActionEntry

rlDhcpApprovalActionEntry 1.3.6.1.4.1.89.76.6.1
An entry in rlDhcpApprovalActionTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlDhcpApprovalActionEntry  

rlDhcpApprovalActionIfIndex 1.3.6.1.4.1.89.76.6.1.1
IP interface ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rlDhcpApprovalActionAddress 1.3.6.1.4.1.89.76.6.1.2
IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rlDhcpApprovalActionMask 1.3.6.1.4.1.89.76.6.1.3
IP Address mask.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rlDhcpApprovalActionApprove 1.3.6.1.4.1.89.76.6.1.4
Approve or decline ip address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlDhcpClCommandTable 1.3.6.1.4.1.89.76.7
Action MIB for DHCP Renew command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SEQUENCE OF  
    RlDhcpClCommandEntry

rlDhcpClCommandEntry 1.3.6.1.4.1.89.76.7.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlDhcpClCommandEntry  

rlDhcpClCommandAction 1.3.6.1.4.1.89.76.7.1.2
Action to apply.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), renew(1)  

rlStormCtrl 1.3.6.1.4.1.89.77
OBJECT IDENTIFIER    

rlStormCtrlSupport 1.3.6.1.4.1.89.77.1
Identify if the strom control protection is supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rlStormCtrlMibVersion 1.3.6.1.4.1.89.77.2
MIB's version, the current version is 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlStormCtrlRateUnitTypeSupport 1.3.6.1.4.1.89.77.3
the supported rate unit type for the storm rate control
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

rlStormCtrlTypeSupport 1.3.6.1.4.1.89.77.4
the supported frame type for the storm control protection
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

rlStormCtrlRateSupportPerType 1.3.6.1.4.1.89.77.5
identify if rate control is supported for each frame type
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

rlStormCtrlEnbaleDependencyBetweenTypes 1.3.6.1.4.1.89.77.6
indicate enable limitation of dependency between frame types, such as enabling of multicast should be with the enabling of broadcast type (bcm 5632)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

rlStormCtrlRateDependencyBetweenTypes 1.3.6.1.4.1.89.77.7
indicate limitation of dependency between frame types for rate assignment, for example: assigning of rate limit for unicast frame must assigning the same rate for multicast and bradcast frame (bcm 5615), in case the device support enbale per each frame type but with the same rate limitation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

rlStormCtrlTable 1.3.6.1.4.1.89.77.8
The table contains the storm control protection per port
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlStormCtrlEntry

rlStormCtrlEntry 1.3.6.1.4.1.89.77.8.1
storm control protection, defined per port,frame type and rate
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlStormCtrlEntry  

rlStormCtrlRateType 1.3.6.1.4.1.89.77.8.1.1
indicate the rate unit type
Status: mandatory Access: read-write
OBJECT-TYPE    
  RlStormCtrlRateUnit  

rlStormCtrlUnknownUnicastEnable 1.3.6.1.4.1.89.77.8.1.2
enable or disable the storm control for unknown unicast frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlUnknownUnicastRate 1.3.6.1.4.1.89.77.8.1.3
set the storm control rate limit for the unknown unicast frames, 0 indicate blocking of frames from this type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned-32  

rlStormCtrlUnknownMulticastEnable 1.3.6.1.4.1.89.77.8.1.4
enable or disable the storm control for unknown multicast frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlUnknownMulticastRate 1.3.6.1.4.1.89.77.8.1.5
set the storm control rate limit for the unknown multicast frames, 0 indicate blocking of frames from this type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned-32  

rlStormCtrlBroadcastEnable 1.3.6.1.4.1.89.77.8.1.6
enable or disable the storm control for Broadcast frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlBroadcastRate 1.3.6.1.4.1.89.77.8.1.7
set the storm control rate limit for the Broadcast frames, 0 indicate blocking of frames from this type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned-32  

rlStormCtrlMulticastEnable 1.3.6.1.4.1.89.77.8.1.8
enable or disable the storm control for multicast frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlMulticastRate 1.3.6.1.4.1.89.77.8.1.9
set the storm control rate limit for the multicast frames, 0 indicate blocking of frames from this type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned-32  

rlStormCtrlSetDefaultRateType 1.3.6.1.4.1.89.77.8.1.10
indicate if return the rate unit type to its default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlSetDefaultUnknownUnicastEnable 1.3.6.1.4.1.89.77.8.1.11
indicate if return the storm control enable for unknown unicast frames to its default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlSetDefaultUnknownUnicastRate 1.3.6.1.4.1.89.77.8.1.12
indicate if return the storm control rate limit for the unknown unicast frames to its default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlSetDefaultUnknownMulticastEnable 1.3.6.1.4.1.89.77.8.1.13
indicate if return the storm control enable for unknown multicast frames to its default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlSetDefaultUnknownMulticastRate 1.3.6.1.4.1.89.77.8.1.14
indicate if return the storm control rate limit for the unknown multicast frames to its default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlSetDefaultBroadcastEnable 1.3.6.1.4.1.89.77.8.1.15
indicate if return the storm control enable for Broadcast frames to its default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlSetDefaultBroadcastRate 1.3.6.1.4.1.89.77.8.1.16
indicate if return the storm control rate limit for the Broadcast frames to its default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlSetDefaultMulticastEnable 1.3.6.1.4.1.89.77.8.1.17
indicate if return the storm control for multicast frames to its default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlSetDefaultMulticastRate 1.3.6.1.4.1.89.77.8.1.18
indicate if return the storm control rate limit for the multicast frames to its default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlStormCtrlGroupTable 1.3.6.1.4.1.89.77.9
The table contains per port for each supported frame type to which group it belongs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlStormCtrlGroupEntry

rlStormCtrlGroupEntry 1.3.6.1.4.1.89.77.9.1
group id for each supported frame type defined per port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlStormCtrlGroupEntry  

rlStormCtrlGroupUnknownUnicastId 1.3.6.1.4.1.89.77.9.1.1
Indicates the id of the group for unknown unicast frame type that the port belongs to, 0 indicates that unknown unicast frame type is not supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlStormCtrlGroupUnknownMulticastId 1.3.6.1.4.1.89.77.9.1.2
Indicates the id of the group for unknown multicast frame type that the port belongs to, 0 indicates that unknown multicast frame type is not supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlStormCtrlGroupBroadcastId 1.3.6.1.4.1.89.77.9.1.3
Indicates the id of the group for broadcast frame type that the port belongs to, 0 indicates that broadcast frame type is not supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlStormCtrlGroupMulticastId 1.3.6.1.4.1.89.77.9.1.4
Indicates the id of the group for multicast frame type that the port belongs to, 0 indicates that multicast frame type is not supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlSsh 1.3.6.1.4.1.89.78
OBJECT IDENTIFIER    

rlAAA 1.3.6.1.4.1.89.79
OBJECT IDENTIFIER    

rlRadius 1.3.6.1.4.1.89.80
OBJECT IDENTIFIER    

rlTraceRoute 1.3.6.1.4.1.89.81
OBJECT IDENTIFIER    

rlTraceRouteMibVersion 1.3.6.1.4.1.89.81.1
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlSyslog 1.3.6.1.4.1.89.82
OBJECT IDENTIFIER    

rlEnv 1.3.6.1.4.1.89.83
OBJECT IDENTIFIER    

rlSmon 1.3.6.1.4.1.89.84
OBJECT IDENTIFIER    

rlPortCopyMibVersion 1.3.6.1.4.1.89.84.1
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlPortCopySupport 1.3.6.1.4.1.89.84.2
supported - The standard portCopy is supported. notSupported - the standard portCopy is not supported. only basic portCopy operation is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), notSupported(2)  

rlPortCopyVlanTaggingTable 1.3.6.1.4.1.89.84.3
A supplementing table for portCopyTable. For every portCopyDest a vlan-tagging option is available.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlPortCopyVlanTaggingEntry

rlPortCopyVlanTaggingEntry 1.3.6.1.4.1.89.84.3.1
Each entry specify how mirrored packets will transmit from the portCopyDest: Tagged or unTagged. The values in this entry will be valid only when the dot1dBasePort will be configured as a portCopyDest in the portCopyTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlPortCopyVlanTaggingEntry  

rlPortCopyVlanTagging 1.3.6.1.4.1.89.84.3.1.1
TRUE - Mirrored packets will transmit from portCopyDest - Tagged FALSE - Mirrored packets will transmit from portCopyDest - unTagged
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlSocket 1.3.6.1.4.1.89.85
OBJECT IDENTIFIER    

rlSocketMibVersion 1.3.6.1.4.1.89.85.1
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlSocketTable 1.3.6.1.4.1.89.85.2
The (conceptual) table listing the sockets which are currently open in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlSocketEntry

rlSocketEntry 1.3.6.1.4.1.89.85.2.1
An entry (conceptual row) in the SocketTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlSocketEntry  

rlSocketId 1.3.6.1.4.1.89.85.2.1.1
The value of the id of the socket.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rlSocketType 1.3.6.1.4.1.89.85.2.1.2
Specifies the type of the socket.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER stream(1), dgram(2), raw(3)  

rlSocketState 1.3.6.1.4.1.89.85.2.1.3
Specifies the state in which the socket is in.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), notConnected(2), recvClosed(3), sendClosed(4), closed(5)  

rlSocketBlockMode 1.3.6.1.4.1.89.85.2.1.4
Specifies the blocking mode of the socket.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER blocking(1), nonBlocking(2)  

rlSocketUpTime 1.3.6.1.4.1.89.85.2.1.5
The time elapsed since this socket was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

rlDigitalKeyManage 1.3.6.1.4.1.89.86
OBJECT IDENTIFIER    

rlMD5KeyChainTable 1.3.6.1.4.1.89.86.1
Key-chains and key ID's
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlMD5KeyChainEntry

rlMD5KeyChainEntry 1.3.6.1.4.1.89.86.1.1
Key-chain with key ID that belongs to this chain
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlMD5KeyChainEntry  

rlMD5KeyChainName 1.3.6.1.4.1.89.86.1.1.1
Name of the key-chain to which belongs the secret authentication key
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rlMD5KeyChainKeyId 1.3.6.1.4.1.89.86.1.1.2
A 8-bit identifier for the secret authentication key. This identifier is the same as key ID used in rlMD5KeyTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

rlMD5KeyChainKeyRowStatus 1.3.6.1.4.1.89.86.1.1.3
It is used to insert, update or delete an entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

rlMD5KeyTable 1.3.6.1.4.1.89.86.2
Secret authentication keys used by MD5 Authentication Algorithm
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlMD5KeyEntry

rlMD5KeyEntry 1.3.6.1.4.1.89.86.2.1
Secret authentication key with all related parameters
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RlMD5KeyEntry  

rlMD5KeyId 1.3.6.1.4.1.89.86.2.1.1
A 8-bit identifier for the secret authentication key
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

rlMD5Key 1.3.6.1.4.1.89.86.2.1.2
The 128-bit secret authentication key. The key can get value only once and cannot be modified. When read, rlMD5KeyChainKey always returns an Octet String of length zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..16)  

rlMD5KeyStartAccept 1.3.6.1.4.1.89.86.2.1.3
The time that the router will start accepting packets that have been created with the given key
Status: mandatory Access: read-write
OBJECT-TYPE    
  DateAndTime  

rlMD5KeyStartGenerate 1.3.6.1.4.1.89.86.2.1.4
The time that the router will start using the key for packet generation
Status: mandatory Access: read-write
OBJECT-TYPE    
  DateAndTime  

rlMD5KeyStopGenerate 1.3.6.1.4.1.89.86.2.1.5
The time that the router will stop using the key for packet generation
Status: mandatory Access: read-write
OBJECT-TYPE    
  DateAndTime  

rlMD5KeyStopAccept 1.3.6.1.4.1.89.86.2.1.6
The time that the router will stop accepting packets that have been created with the given key
Status: mandatory Access: read-write
OBJECT-TYPE    
  DateAndTime  

rlMD5KeyRowStatus 1.3.6.1.4.1.89.86.2.1.7
It is used to insert, update or delete an entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

rlCopy 1.3.6.1.4.1.89.87
OBJECT IDENTIFIER    

rlQosCliMib 1.3.6.1.4.1.89.88
OBJECT IDENTIFIER    

rlMngInf 1.3.6.1.4.1.89.89
OBJECT IDENTIFIER    

rlPhy 1.3.6.1.4.1.89.90
OBJECT IDENTIFIER    

rlJumboFrames 1.3.6.1.4.1.89.91
OBJECT IDENTIFIER    

rlJumboFramesCurrentStatus 1.3.6.1.4.1.89.91.1
Show the current Jumbo Frames status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rlJumboFramesStatusAfterReset 1.3.6.1.4.1.89.91.2
Set the Jumbo Frames status after reset
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rlTimeSynchronization 1.3.6.1.4.1.89.92
OBJECT IDENTIFIER    

rlDnsCl 1.3.6.1.4.1.89.93
OBJECT IDENTIFIER    

rlCDB 1.3.6.1.4.1.89.94
OBJECT IDENTIFIER    

rlStartupCDBChanged 1.3.6.1.4.1.89.94.1
Indicates whether the startup CDB has changed between the router's last two reboots
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rlManualReboot 1.3.6.1.4.1.89.94.2
Indicates whether the device was shutdown orderly before reboot or not (i.e. power failure)
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1x 1.3.6.1.4.1.89.95
OBJECT IDENTIFIER    

rldot1xMibVersion 1.3.6.1.4.1.89.95.1
MIB's version, the current version is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1xExtAuthSessionStatsTable 1.3.6.1.4.1.89.95.2
A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1xExtAuthSessionStatsEntry

rldot1xExtAuthSessionStatsEntry 1.3.6.1.4.1.89.95.2.1
The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1xExtAuthSessionStatsEntry  

rlDot1xAuthSessionAuthenticMethod 1.3.6.1.4.1.89.95.2.1.1
The authentication method used to establish the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER remoteAuthServer(1), localAuthServer(2), none(3)  

rldot1xGuestVlanSupported 1.3.6.1.4.1.89.95.3
indicate if guest vlan is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1xGuestVlanVID 1.3.6.1.4.1.89.95.4
specify the guest vlan tag , 0 for non exiting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VlanIndex  

rldot1xGuestVlanPorts 1.3.6.1.4.1.89.95.5
the ports that can be members in the guest vlan
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortList  

rldot1xUnAuthenticatedVlanSupported 1.3.6.1.4.1.89.95.6
indicate if unauthenticated Vlan is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1xUnAuthenticatedVlanTable 1.3.6.1.4.1.89.95.7
port belong to vlan in all port authenticated state except force unauthenticated table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1xUnAuthenticatedVlanEntry

rldot1xUnAuthenticatedVlanEntry 1.3.6.1.4.1.89.95.7.1
port belong to vlan in all port authenticated state except force unauthenticated entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1xUnAuthenticatedVlanEntry  

rldot1xUnAuthenticatedVlanStatus 1.3.6.1.4.1.89.95.7.1.1
The row status variable, used according to row installation and removal conventions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

rldot1xUserBasedVlanSupported 1.3.6.1.4.1.89.95.8
indicate if user based Vlan is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

rldot1xUserBasedVlanPorts 1.3.6.1.4.1.89.95.9
the ports that can be members in the user based vlan
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortList  

rldot1xAuthenticationPortTable 1.3.6.1.4.1.89.95.10
A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1xAuthenticationPortEntry

rldot1xAuthenticationPortEntry 1.3.6.1.4.1.89.95.10.1
The Port number and mac method
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1xAuthenticationPortEntry  

rldot1xAuthenticationPortMethod 1.3.6.1.4.1.89.95.10.1.1
The value of the mac based authenication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER eapolOnly(1), macAndEapol(2), macOnly(3)  

rldot1xAuthMultiStatsTable 1.3.6.1.4.1.89.95.11
A table that contains the statistics objects for the Authenticator PAE associated with each Port and MAC for multisession 802.1x mode of operation. An entry appears in this table for each port and MAC that have an authentication session currently running under way for them.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1xAuthMultiStatsEntry

rldot1xAuthMultiStatsEntry 1.3.6.1.4.1.89.95.11.1
The statistics information for an Authenticator PAE.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1xAuthMultiStatsEntry  

rldot1xAuthMultiStatsPortNumber 1.3.6.1.4.1.89.95.11.1.1
Port Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1xAuthMultiStatsSourceMac 1.3.6.1.4.1.89.95.11.1.2
Mac of the authentication session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

rldot1xAuthMultiEapolFramesRx 1.3.6.1.4.1.89.95.11.1.3
The number of valid EAPOL frames of any type that have been received by this Authenticator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiEapolFramesTx 1.3.6.1.4.1.89.95.11.1.4
The number of EAPOL frames of any type that have been transmitted by this Authenticator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiEapolStartFramesRx 1.3.6.1.4.1.89.95.11.1.5
The number of EAPOL Start frames that have been received by this Authenticator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiEapolLogoffFramesRx 1.3.6.1.4.1.89.95.11.1.6
The number of EAPOL Logoff frames that have been received by this Authenticator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiEapolRespIdFramesRx 1.3.6.1.4.1.89.95.11.1.7
The number of EAP Resp/Id frames that have been received by this Authenticator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiEapolRespFramesRx 1.3.6.1.4.1.89.95.11.1.8
The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiEapolReqIdFramesTx 1.3.6.1.4.1.89.95.11.1.9
The number of EAP Req/Id frames that have been transmitted by this Authenticator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiEapolReqFramesTx 1.3.6.1.4.1.89.95.11.1.10
The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiInvalidEapolFramesRx 1.3.6.1.4.1.89.95.11.1.11
The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiEapLengthErrorFramesRx 1.3.6.1.4.1.89.95.11.1.12
The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiDiagTable 1.3.6.1.4.1.89.95.12
A table that contains the diagnostics objects for the Authenticator PAE associated with each Port and MAC. An entry appears in this table for each port and MAC that have an authentication session currently running under way for them.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1xAuthMultiDiagEntry

rldot1xAuthMultiDiagEntry 1.3.6.1.4.1.89.95.12.1
The diagnostics information for an Authenticator PAE.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1xAuthMultiDiagEntry  

rldot1xAuthMultiDiagPortNumber 1.3.6.1.4.1.89.95.12.1.1
Port Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1xAuthMultiDiagSourceMac 1.3.6.1.4.1.89.95.12.1.2
Mac of the authentication session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

rldot1xAuthMultiEntersConnecting 1.3.6.1.4.1.89.95.12.1.3
Counts the number of times that the state machine transitions to the CONNECTING state from any other state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiEntersAuthenticating 1.3.6.1.4.1.89.95.12.1.4
Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiAuthSuccessWhileAuthenticating 1.3.6.1.4.1.89.95.12.1.5
Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuccess = TRUE).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiAuthFailWhileAuthenticating 1.3.6.1.4.1.89.95.12.1.6
Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiAuthReauthsWhileAuthenticating 1.3.6.1.4.1.89.95.12.1.7
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiAuthEapStartsWhileAuthenticating 1.3.6.1.4.1.89.95.12.1.8
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiAuthReauthsWhileAuthenticated 1.3.6.1.4.1.89.95.12.1.9
Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiAuthEapStartsWhileAuthenticated 1.3.6.1.4.1.89.95.12.1.10
Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiBackendResponses 1.3.6.1.4.1.89.95.12.1.11
Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiBackendAccessChallenges 1.3.6.1.4.1.89.95.12.1.12
Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiBackendOtherRequestsToSupplicant 1.3.6.1.4.1.89.95.12.1.13
Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiBackendNonNakResponsesFromSupplicant 1.3.6.1.4.1.89.95.12.1.14
Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticators chosen EAP-method.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiBackendAuthSuccesses 1.3.6.1.4.1.89.95.12.1.15
Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiSessionStatsTable 1.3.6.1.4.1.89.95.13
A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1xAuthMultiSessionStatsEntry

rldot1xAuthMultiSessionStatsEntry 1.3.6.1.4.1.89.95.13.1
The session statistics information for an Authenticator PAE. This shows the mandatory values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1xAuthMultiSessionStatsEntry  

rldot1xAuthMultiSessionStatsPortNumber 1.3.6.1.4.1.89.95.13.1.1
Port Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1xAuthMultiSessionStatsSourceMac 1.3.6.1.4.1.89.95.13.1.2
Mac of the authentication session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

rldot1xAuthMultiSessionOctetsRx 1.3.6.1.4.1.89.95.13.1.3
The number of octets received in user data frames on this Port during the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

rldot1xAuthMultiSessionOctetsTx 1.3.6.1.4.1.89.95.13.1.4
The number of octets transmitted in user data frames on this Port during the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

rldot1xAuthMultiSessionFramesRx 1.3.6.1.4.1.89.95.13.1.5
The number of user data frames received on this Port during the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiSessionFramesTx 1.3.6.1.4.1.89.95.13.1.6
The number of user data frames transmitted on this Port during the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

rldot1xAuthMultiSessionId 1.3.6.1.4.1.89.95.13.1.7
A unique identifier for the session, in the form of a printable ASCII string of at least three characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

rldot1xAuthMultiSessionTime 1.3.6.1.4.1.89.95.13.1.8
The duration of the session in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

rldot1xAuthMultiSessionUserName 1.3.6.1.4.1.89.95.13.1.9
The User-Name representing the identity of the Supplicant PAE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

rldot1xAuthMultiConfigTable 1.3.6.1.4.1.89.95.14
A table that contains the configuration objects for the Authenticator PAE associated with each port and MAC. An entry appears in this table for each port and MAC that may authenticate access to itself.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rldot1xAuthMultiConfigEntry

rldot1xAuthMultiConfigEntry 1.3.6.1.4.1.89.95.14.1
The configuration information for an Authenticator PAE.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Rldot1xAuthMultiConfigEntry  

rldot1xAuthMultiPortNumber 1.3.6.1.4.1.89.95.14.1.1
Port Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rldot1xAuthMultiSourceMac 1.3.6.1.4.1.89.95.14.1.2
Mac of the authentication session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

rldot1xAuthMultiPaeState 1.3.6.1.4.1.89.95.14.1.3
The current value of the Authenticator PAE state machine.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9)  

rldot1xAuthMultiBackendAuthState 1.3.6.1.4.1.89.95.14.1.4
The current state of the Backend Authentication state machine.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7)  

rldot1xAuthMultiControlledPortStatus 1.3.6.1.4.1.89.95.14.1.5
The current value of the controlled Port status parameter for the Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PaeControlledPortStatus  

rldot1xBpduFilteringEnabled 1.3.6.1.4.1.89.95.15
Specify that when 802.1x is globally disabled, 802.1x BPDU packets would be filtered or bridged.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

rlFile 1.3.6.1.4.1.89.96
OBJECT IDENTIFIER    

rlAAAEap 1.3.6.1.4.1.89.97
OBJECT IDENTIFIER    

rlSNMP 1.3.6.1.4.1.89.98
OBJECT IDENTIFIER    

rlSsl 1.3.6.1.4.1.89.100
OBJECT IDENTIFIER    

rlMacBasePrio 1.3.6.1.4.1.89.101
OBJECT IDENTIFIER    

rlWlanAccessPoint 1.3.6.1.4.1.89.102
OBJECT IDENTIFIER    

rlLocalization 1.3.6.1.4.1.89.103
OBJECT IDENTIFIER    

rlRs232 1.3.6.1.4.1.89.104
OBJECT IDENTIFIER    

rlNicRedundancy 1.3.6.1.4.1.89.105
OBJECT IDENTIFIER    

rlAmap 1.3.6.1.4.1.89.106
OBJECT IDENTIFIER    

rlStack 1.3.6.1.4.1.89.107
OBJECT IDENTIFIER    

rlPoe 1.3.6.1.4.1.89.108
OBJECT IDENTIFIER    

rlUPnP 1.3.6.1.4.1.89.109
OBJECT IDENTIFIER    

rlLldp 1.3.6.1.4.1.89.110
OBJECT IDENTIFIER    

rlOib 1.3.6.1.4.1.89.111
OBJECT IDENTIFIER    

rlBridgeSecurity 1.3.6.1.4.1.89.112
OBJECT IDENTIFIER    

rlDhcpSpoofing 1.3.6.1.4.1.89.113
OBJECT IDENTIFIER    

rlBonjour 1.3.6.1.4.1.89.114
OBJECT IDENTIFIER    

rlLinksysSmartMIB 1.3.6.1.4.1.89.115
OBJECT IDENTIFIER    

rlBrgMulticast 1.3.6.1.4.1.89.116
OBJECT IDENTIFIER    

rlBrgMcMngr 1.3.6.1.4.1.89.117
OBJECT IDENTIFIER    

rlGlobalIpAddrTable 1.3.6.1.4.1.89.118
OBJECT IDENTIFIER    

dlPrivate 1.3.6.1.4.1.89.119
OBJECT IDENTIFIER    

rlSecuritySuiteMib 1.3.6.1.4.1.89.120
OBJECT IDENTIFIER    

rlIntel 1.3.6.1.4.1.89.121
OBJECT IDENTIFIER    

rlAutoUpdate 1.3.6.1.4.1.89.123
OBJECT IDENTIFIER    

rlCpuCounters 1.3.6.1.4.1.89.124
OBJECT IDENTIFIER    

rlWlanMIB 1.3.6.1.4.1.89.200
OBJECT IDENTIFIER    

rndEndOfMibGroup 1.3.6.1.4.1.89.1000
OBJECT IDENTIFIER    

rndEndOfMib 1.3.6.1.4.1.89.1000.1
This variable indicates this is the end of RND MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rxOverflowHWFault 3
An RX buffer overflow has occurred in one of the LAN or link interfaces. The bound variable rndErrorDesc provides the interface number.
TRAP-TYPE    

txOverflowHWFault 4
Interport queue overflow has occurred in one of the LAN or link interfaces. The bound variable rndErrorDesc provides the interface number.
TRAP-TYPE    

routeTableOverflow 5
An overflow condition has occurred in the Routing Table. The Routing Table is used for IP routing algorithm (RIP).
TRAP-TYPE    

resetRequired 10
This trap indicates that in order to perform the last SET request, a reset operation of the router/bridge is required. This occurs when the layer 2 routing algorithm is changed between SPF and Spanning Tree. The reset can be performed manually or using the variable rndAction.
TRAP-TYPE    

endTftp 12
This trap indicates that in the device finished a TFTP transaction with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
TRAP-TYPE    

abortTftp 13
This trap indicates that in the device aborted a TFTP session with the management station. Variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
TRAP-TYPE    

startTftp 14
Informational trap indicating that the device has intiated a TFTP session. rndErrorDesc will contain the file type in question
TRAP-TYPE    

faultBackUp 23
Automantic switchover to backup link because of main link fault.
TRAP-TYPE    

mainLinkUp 24
Communication returened to main link.
TRAP-TYPE    

ipxRipTblOverflow 36
This trap indicates that in an OpenGate IPX RIP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
TRAP-TYPE    

ipxSapTblOverflow 37
This trap indicates that in an OpenGate IPX SAP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
TRAP-TYPE    

facsAccessVoilation 49
This trap indicates that message that fits FACS statenebt with operation blockAndReport was forward to the interface. The bound variable rndErrorDesc, rndErrorSeverity(== info ) and interface Number.
TRAP-TYPE    

autoConfigurationCompleted 50
This trap indicates that auto comfiguration completetd succssefully. The bound variable rndErrorDesc, rndErrorSeverity(== info )
TRAP-TYPE    

forwardingTabOverflow 51
This trap indicates that an overflow condition has occurred in the layer II Forward Table. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
TRAP-TYPE    

framRelaySwitchConnectionUp 53
This trap indicates that a connection establish between the Frame relay Switch and the WanGate. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
TRAP-TYPE    

framRelaySwitchConnectionDown 54
This trap indicates that a connection between the Frame Relay Switch and the WanGate failed. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
TRAP-TYPE    

errorsDuringInit 61
This trap indicates that the an error occured during initialization The bound variable rndErrorDesc, rndErrorSeverity(== error )
TRAP-TYPE    

vlanDynPortAdded 66
Tok_String
TRAP-TYPE    

vlanDynPortRemoved 67
Tok_String
TRAP-TYPE    

rsSDclientsTableOverflow 68
This warning is generated when an overflow occurs in the clients table.
TRAP-TYPE    

rsSDinactiveServer 69
This warning is generated when a server does not respond to the dispatchers polling and is thought to be inactive.
TRAP-TYPE    

rsIpZhrConnectionsTableOverflow 70
The Zero Hop Routing connections Table has been overflown.
TRAP-TYPE    

rsIpZhrReqStaticConnNotAccepted 71
The requested static connection was not accepted because there is no available IP virtual address to allocate to it.
TRAP-TYPE    

rsIpZhrVirtualIpAsSource 72
The virtual IP address appeared as a source IP. All the connections using it will be deleted and it will not be further allocated to new connections.
TRAP-TYPE    

rsIpZhrNotAllocVirtualIp 73
The source IP address sent an ARP specifying a virtual IP which was not allocated for this source. This virtual IP will not be allocated to connections of this specific source IP.
TRAP-TYPE    

rsSnmpSetRequestInSpecialCfgState 74
An incoming SNMP SET request was rejected because no such requests (except action requests) are accepted after start of new configuration reception or during sending the current configuration to an NMS.
TRAP-TYPE    

rsPingCompletion 136
A rsPingCompleted trap is sent at the completion of a sequence of pings if such a trap was requested when the sequence was initiated. The trap severity is info. The trap text will specify the following information: rsPingCompletionStatus, rsPingSentPackets, rsPingReceivedPackets In addition to the above listed objects (which are always present), the message will also specify the following quantities: if any responses were received: rsPingMinReturnTime rsPingAvgReturnTime rsPingMaxReturnTime
TRAP-TYPE    

pppSecurityViolation 137
This trap indicates that a PPP link got an unrecognized secret. The bound variables rndErrorDesc, rndErrorSeverity(== warning ), interface Number. and pppSecurityIdentity
TRAP-TYPE    

frDLCIStatudChange 138
Tok_String
TRAP-TYPE    

papFailedCommunication 139
Tok_String
TRAP-TYPE    

chapFailedCommunication 140
Tok_String
TRAP-TYPE    

rsWSDRedundancySwitch 141
Whenever main server fails and backup takes over or server comes up after failure a trap of this type is issued.
TRAP-TYPE    

rsDhcpAllocationFailure 142
DHCP failed to allocate an IP address to a requesting host because of memory shortage or inadequate configuration of available IP addresses.
TRAP-TYPE    

rlIpFftStnOverflow 145
The IP SFFT overflow.
TRAP-TYPE    

rlIpFftSubOverflow 146
The IP NFFT overflow.
TRAP-TYPE    

rlIpxFftStnOverflow 147
The IPX SFFT overflow.
TRAP-TYPE    

rlIpxFftSubOverflow 148
The IPX NFFT overflow.
TRAP-TYPE    

rlIpmFftOverflow 149
The IPM FFT overflow.
TRAP-TYPE    

rlPhysicalDescriptionChanged 150
Indicates that the physical decription of the device has changed
TRAP-TYPE    

rldot1dStpPortStateForwarding 151
The trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state.
TRAP-TYPE    

rldot1dStpPortStateNotForwarding 152
The trap is sent by a bridge when any of its configured ports transitions from the Forwarding state to the Blocking state.
TRAP-TYPE    

rlPolicyDropPacketTrap 153
Indicates that the packet drop due to the policy
TRAP-TYPE    

rlPolicyForwardPacketTrap 154
Indicates that the packet has forward based on policy
TRAP-TYPE    

rlIgmpProxyTableOverflow 156
An IGMP PROXY Table overflow.
TRAP-TYPE    

rlIgmpV1MsgReceived 157
An IGMP Message of v1 received on ifIndex.
TRAP-TYPE    

rlVrrpEntriesDeleted 158
One or more VRRP entries deleted due to IP interface deletion or transition.
TRAP-TYPE    

rlHotSwapTrap 159
Hot swap trap.
TRAP-TYPE    

rlTrunkPortAddedTrap 160
Informational trap indicating that a port is added to a trunk
TRAP-TYPE    

rlTrunkPortRemovedTrap 161
This warning is generated when a port removed from a trunk.
TRAP-TYPE    

rlTrunkPortNotCapableTrap 162
Informational trap indicating that a port can not be added to a trunk because of device limitations or diffrent swIfType.
TRAP-TYPE    

rlLockPortTrap 170
Informational trap indicating that a locked port receive a frame with new source Mac Address.
TRAP-TYPE    

vlanDynVlanAdded 171
add gvrp dynamic vlan
TRAP-TYPE    

vlanDynVlanRemoved 172
remove gvrp dynamic vlan
TRAP-TYPE    

vlanDynamicToStatic 173
vlan status was changed from dynamic to static
TRAP-TYPE    

vlanStaticToDynamic 174
vlan status was changed from static to dynamic
TRAP-TYPE    

dstrSysLog 175
Master receive trap from slave , and forward it as trap
TRAP-TYPE    

rlEnvMonFanStateChange 176
Trap indicating the fan state. rndErrorSeverity will be: 0 for fan state nomal, notPresent 1 for fan state warning, notFunctioning 2 for fan state critical 3 for fan state fatal The error text will specify the fan index, fan description and the exact fan state
TRAP-TYPE    

rlEnvMonPowerSupplyStateChange 177
Trap indicating the power supply state. rndErrorSeverity will be: 0 for power supply state nomal, notPresent 1 for power supply state warning, notFunctioning 2 for power supply state critical 3 for power supply state fatal The error text will specify the power supply index, power supply description and the exact power supply state
TRAP-TYPE    

rlStackStateChange 178
Trap indicating the stack connection state 0 for stack state connected, 1 for stack state disconnected
TRAP-TYPE    

rlEnvMonTemperatureRisingAlarm 179
Trap indicating that the temperature in the device has exceeded the device specific safe temperature threshold.
TRAP-TYPE    

rlBrgMacAddFailedTrap 183
Informational trap indicating that adding dynamic mac/s failed due to full hash chain.
TRAP-TYPE    

rldot1xPortStatusAuthorizedTrap 184
Informational trap indicating that port 802.1x status is authorized.
TRAP-TYPE    

rldot1xPortStatusUnauthorizedTrap 185
Warning trap is indicating that port 802.1x status is unAuthorized.
TRAP-TYPE    

swIfTablePortLock 192
Warning trap is indicating port lock hase began.
TRAP-TYPE    

swIfTablePortUnLock 193
Warning trap is indicating port lock has ended.
TRAP-TYPE    

rlAAAUserLocked 194
Warning trap indicating that the user was locked after number of consecutives unsuccessful login attempts.
TRAP-TYPE    

bpduGuardPortSuspended 202
Warning trap indicating - Port was suspended because there was BPDU Guard violation.
TRAP-TYPE    

rldot1xSupplicantMacAuthorizedTrap 203
Informational trap indicating that MAC authentication supplicant is authenticated and is allowed to access the network.
TRAP-TYPE    

rldot1xSupplicantMacUnauthorizedTrap 204
Warning trap is indicating that Radius server rejects MAC authentication supplicant.
TRAP-TYPE    

stpLoopbackDetection 205
Warning trap indicating - A loopback was detected on port.
TRAP-TYPE    

stpLoopbackDetectionResolved 206
Warning trap indicating - A loopback detection resolved on port.
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor