RADLAN-TRUNK-MIB

File: RADLAN-TRUNK-MIB.mib (17533 bytes)

Imported modules

RADLAN-MIB SNMPv2-SMI SNMPv2-TC
IEEE8023-LAG-MIB

Imported symbols

rnd OBJECT-TYPE IpAddress
Unsigned32 Counter32 TimeTicks
MODULE-IDENTITY DisplayString TEXTUAL-CONVENTION
TruthValue RowStatus PhysAddress
dot3adAggIndex dot3adAggPortIndex

Defined Types

RlDot3adAggBalanceEntry  
SEQUENCE    
  rlDot3adAggBalanceForwardType INTEGER
  rlDot3adAggBalanceLayer INTEGER
  rlDot3adAggBalanceUsedAddresses INTEGER
  rlDot3adAggBalanceBroadcastType INTEGER

RlDot3adAggCreationEntry  
SEQUENCE    
  rlDot3adAggCreationTrunk TruthValue
  rlDot3adAggCreationLacp TruthValue

RlDot3adAggPortLacpEntry  
SEQUENCE    
  rlDot3adAggPortLacpPdusRx Counter32
  rlDot3adAggPortLacpPDUsTx Counter32
  rlDot3adAggPortLacpRxState INTEGER
  rlDot3adAggPortLacpMuxState INTEGER
  rlDot3adAggPortLacpPeriodicState INTEGER
  rlDot3adAggPortLacpSelected INTEGER
  rlDot3adAggPortLacpReady TruthValue
  rlDot3adAggPortLacpPortMoved TruthValue
  rlDot3adAggPortLacpNNT TruthValue
  rlDot3adAggPortLacpPeriodicTxTimer INTEGER
  rlDot3adAggPortLacpCurrentWhileTimer INTEGER
  rlDot3adAggPortLacpWaitWhileTimer INTEGER

RlDot3adAggLacpMembershipRestrictionsEntry  
SEQUENCE    
  rlDot3adAggLacpMembershipRestrictionsPartnerAdminKey Unsigned32
  rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode Unsigned32
  rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId PhysAddress
  rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority Unsigned32
  rlDot3adAggLacpMembershipRestrictionsIndividualAggregator TruthValue

Defined Values

rlDot3adAgg 1.3.6.1.4.1.89.65
The private MIB module definition for trunk support in Radlan devices.
MODULE-IDENTITY    

rlDot3adAggMibVersion 1.3.6.1.4.1.89.65.1
MIB's version, the current version is 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlDot3adAggBalanceTable 1.3.6.1.4.1.89.65.2
An entry of this table specifies a balancing criterion used for the corresponding dot3adAggIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlDot3adAggBalanceEntry

rlDot3adAggBalanceEntry 1.3.6.1.4.1.89.65.2.1
A list of information for each dot3adAggIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlDot3adAggBalanceEntry  

rlDot3adAggBalanceForwardType 1.3.6.1.4.1.89.65.2.1.1
A Forwarding type: Bridging or Routing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bridging(1), routing(2)  

rlDot3adAggBalanceLayer 1.3.6.1.4.1.89.65.2.1.2
A Network Layer Number, may have the following values: 2, 3 or 4. The default value is: Bridging: 2 Routing: 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

rlDot3adAggBalanceUsedAddresses 1.3.6.1.4.1.89.65.2.1.3
Specifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notApplied(0), dstAddr(1), srcAddr(2), dstAndSrcAddr(3), vlanId(4), ethType(5)  

rlDot3adAggBalanceBroadcastType 1.3.6.1.4.1.89.65.2.1.4
Specifies a balancing criterion used for L2 broadcast and unknown frames: common: a link allocated for broadcast and unknown frames is used for unicast frames too dedicated: a link allocated for broadcast and unknown frames is not used for unicast frames
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER common(0), dedicated(1)  

rlDot3adAggNumOfTrunks 1.3.6.1.4.1.89.65.3
The number of trunks supported by the device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlDot3adAggMaxPortsInTrunks 1.3.6.1.4.1.89.65.4
The maximun number of ports in a trunk.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlDot3adAggTrunkCreationSupport 1.3.6.1.4.1.89.65.5
Specifies if there is support to rldot3adAggCreationTable, and the type of the support: supportedTrunkOrLacp - ports that are members in some trunk are belongs to it by manual configuration or by lacp, but not togther. notSupported - there is not support to rldot3adAggCreationTable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notSupported(0), supportsTrunkOrLacp(1)  

rlDot3adAggCreationTable 1.3.6.1.4.1.89.65.6
An entry of this table is for creation of an aggregator for the corresponding dot3adAggIndex, when the value of the rlDot3adAggCreationSupport is diffrent from notSupported.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlDot3adAggCreationEntry

rlDot3adAggCreationEntry 1.3.6.1.4.1.89.65.6.1
An information for each dot3adAggIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlDot3adAggCreationEntry  

rlDot3adAggCreationTrunk 1.3.6.1.4.1.89.65.6.1.1
The aggregator can aggregate ports in manual configuration.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rlDot3adAggCreationLacp 1.3.6.1.4.1.89.65.6.1.2
The aggregator can aggregate ports by lacp.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rlDot3adAggLoadBalancingPerTrunk 1.3.6.1.4.1.89.65.7
Specifies if load balancing is defined per trunk or per device.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rlDot3adAggPortLacpTable 1.3.6.1.4.1.89.65.8
An entry of this table specifies lacp protocol state and statistics for the corresponding dot3adAggPortIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlDot3adAggPortLacpEntry

rlDot3adAggPortLacpEntry 1.3.6.1.4.1.89.65.8.1
A list of information for each dot3adAggPortIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlDot3adAggPortLacpEntry  

rlDot3adAggPortLacpPdusRx 1.3.6.1.4.1.89.65.8.1.1
The number of valid LACPDUs received on this Aggregation Port. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rlDot3adAggPortLacpPDUsTx 1.3.6.1.4.1.89.65.8.1.2
The number of LACPDUs transmitted on this Aggregation Port. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rlDot3adAggPortLacpRxState 1.3.6.1.4.1.89.65.8.1.3
This attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine is in the EXPIRED state, 'defaulted' if the Receive state machine is in the DEFAULTED state, 'initialize' if the Receive state machine is in the INITIALIZE state, 'portDisabled' if the Receive state machine is in the PORT_DISABLED state, or 'lacpDisabled' if the Receive state machine is in the LACP_DISABLED state. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER current(1), expired(2), defaulted(3), initialize(4), portDisabled(5), lacpDisabled(6)  

rlDot3adAggPortLacpMuxState 1.3.6.1.4.1.89.65.8.1.4
This attribute holds the value 'detached' if the Mux state machine for the Aggregation Port is in the DETACHED state, 'waiting' if the Mux state machine is in the WAITING state, 'attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, 'collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, 'distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and 'collecting_ distributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER detached(1), waiting(2), attached(3), collecting(4), distributing(5), collectingDistributing(6)  

rlDot3adAggPortLacpPeriodicState 1.3.6.1.4.1.89.65.8.1.5
This attribute holds the value 'noPeriodic' if the Periodic state machine for the Aggregation Port is in the NO_PERIODIC state, 'fastPeriodic' if the Mux state machine is in the FAST_PERIODIC state, 'slowPeriodic' if the Mux state machine for the Aggregation Port is in the SLOW_PERIODIC state, or 'periodicTx' if the Periodic state machine for the Aggregation Port is in the PERIODIC_TX state. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noPeriodic(1), fastPeriodic(2), slowPeriodic(3), periodicTx(4)  

rlDot3adAggPortLacpSelected 1.3.6.1.4.1.89.65.8.1.6
This attribute holds the value 'unselected' if the Selected variable for the Aggregation Port is set to UNSELECTED, 'selected' if the Selected variable for the Aggregation Port is set to SELECTED, or 'waiting' if the Selected variable for the Aggregation Port is set to WAITING. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unselected(1), selected(2), waiting(3)  

rlDot3adAggPortLacpReady 1.3.6.1.4.1.89.65.8.1.7
A read-only Boolean value indicating whether the Aggregation Port is in the WAITING state in the Mux state machine and its wait_while_timer has expired ('TRUE'). otherwise, its valus is 'FALSE'.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rlDot3adAggPortLacpPortMoved 1.3.6.1.4.1.89.65.8.1.8
A read-only Boolean value indicating whether the Partner_Oper_System or Partner_Oper_Port_Number in use by the Aggregation Port has been changed in an incoming LACPDU ('TRUE'). otherwise, its valus is 'FALSE'.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rlDot3adAggPortLacpNNT 1.3.6.1.4.1.89.65.8.1.9
A read-only Boolean value indicating whether there is a new protocol information that should be transmitted on the link, or that the Partner needs to be reminded of the old information. otherwise, its valus is 'FALSE'.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rlDot3adAggPortLacpPeriodicTxTimer 1.3.6.1.4.1.89.65.8.1.10
The amount of time in seconds remaining before the Periodeic Tx timer will expire. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlDot3adAggPortLacpCurrentWhileTimer 1.3.6.1.4.1.89.65.8.1.11
The amount of time in seconds remaining before the Current While timer will expire. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlDot3adAggPortLacpWaitWhileTimer 1.3.6.1.4.1.89.65.8.1.12
The amount of time in seconds remaining before the Wait While timer will expire. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlDot3adAggLacpMembershipRestrictionsSupport 1.3.6.1.4.1.89.65.9
Specifies if there is support to rlDot3adAggLacpMembershipRestrictionsTable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rlDot3adAggLacpMembershipRestrictionsTable 1.3.6.1.4.1.89.65.10
An entry of this table specifies membership restrictions for ports that lacp is enbaled on them, and try to attach to the corresponding dot3adAggIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlDot3adAggLacpMembershipRestrictionsEntry

rlDot3adAggLacpMembershipRestrictionsEntry 1.3.6.1.4.1.89.65.10.1
A list of information for each dot3adAggIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlDot3adAggLacpMembershipRestrictionsEntry  

rlDot3adAggLacpMembershipRestrictionsPartnerAdminKey 1.3.6.1.4.1.89.65.10.1.1
This variable specifies the administrative key of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode 1.3.6.1.4.1.89.65.10.1.2
This variable specifies the required speed of the LACP aggregator in bits per second. A value of 10 is returned for 10G. A value of 0 is returned if the value of the variable hasn't been set.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId 1.3.6.1.4.1.89.65.10.1.3
This variable specifies the administrative MAC Address of the remote LACP aggregator. A null mac address is returned if the value of the variable hasn't been set.
Status: current Access: read-write
OBJECT-TYPE    
  PhysAddress  

rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority 1.3.6.1.4.1.89.65.10.1.4
This variable specifies the administrative System Priority of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

rlDot3adAggLacpMembershipRestrictionsIndividualAggregator 1.3.6.1.4.1.89.65.10.1.5
This variable specifies if the lacp aggregator represents an Aggregate ('FALSE') or an Individual link ('TRUE').
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue