RADLAN-rlFft

File: RADLAN-rlFft.mib (49891 bytes)

Imported modules

RADLAN-MIB SNMPv2-TC SNMPv2-SMI

Imported symbols

rnd DisplayString Unsigned32
IpAddress MODULE-IDENTITY OBJECT-TYPE
RowStatus TruthValue PhysAddress
TEXTUAL-CONVENTION

Defined Types

Percents  
Specifies percents.
TEXTUAL-CONVENTION    
  INTEGER 0..100  

NetNumber  
Specifies the network identification.
TEXTUAL-CONVENTION    
  OCTET STRING Size(4)  

RlIpFftNumEntry  
SEQUENCE    
  rlIpFftNumIndex INTEGER
  rlIpFftNumStnRoutesNumber INTEGER
  rlIpFftNumSubRoutesNumber INTEGER

RlIpFftStnEntry  
SEQUENCE    
  rlIpFftStnIndex INTEGER
  rlIpFftStnMrid INTEGER
  rlIpFftStnDstIpAddress IpAddress
  rlIpFftStnDstRouteIpMask IpAddress
  rlIpFftStnDstIpAddrType INTEGER
  rlIpFftStnDstMacAddress PhysAddress
  rlIpFftStnSrcMacAddress PhysAddress
  rlIpFftStnOutIfIndex INTEGER
  rlIpFftStnVid INTEGER
  rlIpFftStnTaggedMode INTEGER
  rlIpFftStnAge INTEGER

RlIpFftSubEntry  
SEQUENCE    
  rlIpFftSubMrid INTEGER
  rlIpFftSubDstIpSubnet IpAddress
  rlIpFftSubDstIpMask IpAddress
  rlIpFftSubNextHopSetRefCount INTEGER
  rlIpFftSubNextHopCount INTEGER
  rlIpFftSubNextHopIfindex1 INTEGER
  rlIpFftSubNextHopIpAddr1 IpAddress
  rlIpFftSubNextHopIfindex2 INTEGER
  rlIpFftSubNextHopIpAddr2 IpAddress
  rlIpFftSubNextHopIfindex3 INTEGER
  rlIpFftSubNextHopIpAddr3 IpAddress
  rlIpFftSubNextHopIfindex4 INTEGER
  rlIpFftSubNextHopIpAddr4 IpAddress
  rlIpFftSubNextHopIfindex5 INTEGER
  rlIpFftSubNextHopIpAddr5 IpAddress
  rlIpFftSubNextHopIfindex6 INTEGER
  rlIpFftSubNextHopIpAddr6 IpAddress
  rlIpFftSubNextHopIfindex7 INTEGER
  rlIpFftSubNextHopIpAddr7 IpAddress
  rlIpFftSubNextHopIfindex8 INTEGER
  rlIpFftSubNextHopIpAddr8 IpAddress
  rlIpFftSubAge INTEGER

RlIpFftCountersEntry  
SEQUENCE    
  rlIpFftCountersIndex INTEGER
  rlIpFftInReceives INTEGER
  rlIpFftForwDatagrams INTEGER
  rlIpFftInDiscards INTEGER

RlIpFftNextHopEntry  
SEQUENCE    
  rlIpFftNextHopifindex INTEGER
  rlIpFftNextHopIpAddress IpAddress
  rlIpFftNextHopValid INTEGER
  rlIpFftNextHopType INTEGER
  rlIpFftNextHopReferenceCount INTEGER
  rlIpFftNextHopNetAddress PhysAddress
  rlIpFftNextHopVid INTEGER
  rlIpFftNextHopMacAddress PhysAddress
  rlIpFftNextHopOutIfIndex INTEGER

RlIpFftL2InfoEntry  
SEQUENCE    
  rlIpFftL2InfoIfindex INTEGER
  rlIpFftL2InfoDstMacAddress PhysAddress
  rlIpFftL2InfoValid INTEGER
  rlIpFftL2InfoType INTEGER
  rlIpFftL2InfoReferenceCount INTEGER
  rlIpFftL2InfoVid INTEGER
  rlIpFftL2InfoSrcMacAddress PhysAddress
  rlIpFftL2InfoOutIfIndex INTEGER
  rlIpFftL2InfoTaggedMode INTEGER

RlIpxFftNumEntry  
SEQUENCE    
  rlIpxFftNumIndex INTEGER
  rlIpxFftNumStnRoutesNumber INTEGER
  rlIpxFftNumSubRoutesNumber INTEGER

RlIpxFftStnEntry  
SEQUENCE    
  rlIpxFftStnIndex INTEGER
  rlIpxFftStnDstNetid NetNumber
  rlIpxFftStnDstNode PhysAddress
  rlIpxFftStnSrcNetid NetNumber
  rlIpxFftStnSrcNode PhysAddress
  rlIpxFftStnDstIpxAddrType INTEGER
  rlIpxFftStnEncapsulation INTEGER
  rlIpxFftStnDstMacAddress PhysAddress
  rlIpxFftStnSrcMacAddress PhysAddress
  rlIpxFftStnOutIfIndex INTEGER
  rlIpxFftStnTci INTEGER
  rlIpxFftStnFacsIndex INTEGER
  rlIpxFftStnAge INTEGER

RlIpxFftSubEntry  
SEQUENCE    
  rlIpxFftSubIndex INTEGER
  rlIpxFftSubDstNetid NetNumber
  rlIpxFftSubEncapsulation INTEGER
  rlIpxFftSubDstMacAddress PhysAddress
  rlIpxFftSubSrcMacAddress PhysAddress
  rlIpxFftSubOutIfIndex INTEGER
  rlIpxFftSubTci INTEGER
  rlIpxFftSubFacsIndex INTEGER
  rlIpxFftSubAge INTEGER

RlIpxFftCountersEntry  
SEQUENCE    
  rlIpxFftCountersIndex INTEGER
  rlIpxFftInReceives INTEGER
  rlIpxFftForwDatagrams INTEGER
  rlIpxFftInDiscards INTEGER

RlIpmFftNumEntry  
SEQUENCE    
  rlIpmFftNumIndex INTEGER
  rlIpmFftNumRoutesNumber INTEGER

RlIpmFftEntry  
SEQUENCE    
  rlIpmFftIndex INTEGER
  rlIpmFftSrcIpAddress IpAddress
  rlIpmFftDstIpAddress IpAddress
  rlIpmFftSrcIpMask IpAddress
  rlIpmFftInputIfIndex INTEGER
  rlIpmFftInputVlanTag INTEGER
  rlIpmFftForwardAction INTEGER
  rlIpmFftInportAction INTEGER
  rlIpmFftAge INTEGER

RlIpmFftPortTagEntry  
SEQUENCE    
  rlIpmFftPortIndex INTEGER
  rlIpmFftPortSrcIpAddress IpAddress
  rlIpmFftPortDstIpAddress IpAddress
  rlIpmFftPortOutputifIndex INTEGER
  rlIpmFftPortOutputTag INTEGER

RlIpmFftCountersEntry  
SEQUENCE    
  rlIpmFftCountersIndex INTEGER
  rlIpmFftInReceives INTEGER
  rlIpmFftForwDatagrams INTEGER
  rlIpmFftInDiscards INTEGER

Defined Values

rlFFT 1.3.6.1.4.1.89.47
The private MIB module definition for Fast Forwarding Tables.
MODULE-IDENTITY    

rlIpFFT 1.3.6.1.4.1.89.47.1
OBJECT IDENTIFIER    

rlIpFftMibVersion 1.3.6.1.4.1.89.47.1.1
MIB's version, the current version is 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpMaxFftNumber 1.3.6.1.4.1.89.47.1.2
The maximum number of IP FFTs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftDynamicSupported 1.3.6.1.4.1.89.47.1.3
Specifies whether dynamic IP FFTs are supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpFftSubnetSupported 1.3.6.1.4.1.89.47.1.4
Specifies whether subtable per IP subnet is supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpFftUnknownAddrMsgUsed 1.3.6.1.4.1.89.47.1.5
Specifies whether the 3SW uses the unknown address message.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER used(1), unused(2)  

rlIpFftAgingTimeSupported 1.3.6.1.4.1.89.47.1.6
Specifies whether aging time is supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpFftSrcAddrSupported 1.3.6.1.4.1.89.47.1.7
Specifies whether an IP subtable per station contains source IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpFftAgingTimeout 1.3.6.1.4.1.89.47.1.8
The aging timeout in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

rlIpFftRedBoundary 1.3.6.1.4.1.89.47.1.9
The red boundary in percents.
Status: current Access: read-write
OBJECT-TYPE    
  Percents  

rlIpFftYellowBoundary 1.3.6.1.4.1.89.47.1.10
The yellow boundary in percents.
Status: current Access: read-write
OBJECT-TYPE    
  Percents  

rlIpFftNumTable 1.3.6.1.4.1.89.47.1.12
The (conceptual) table containing routes' numbers of the IP SFFTs and IP NFFTs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpFftNumEntry

rlIpFftNumEntry 1.3.6.1.4.1.89.47.1.12.1
An entry (conceptual row) containing the containing routes' numbers of IP SFFT and IP NFFT
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpFftNumEntry  

rlIpFftNumIndex 1.3.6.1.4.1.89.47.1.12.1.1
The value of the index of the IP FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftNumStnRoutesNumber 1.3.6.1.4.1.89.47.1.12.1.2
The number of routes that are contained in the IP SFFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftNumSubRoutesNumber 1.3.6.1.4.1.89.47.1.12.1.3
The number of routes that are contained in the IP NFFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftStnTable 1.3.6.1.4.1.89.47.1.13
The (conceptual) table contains IP Fast Forwarding information per station for IP datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpFftStnEntry

rlIpFftStnEntry 1.3.6.1.4.1.89.47.1.13.1
An entry (conceptual row) contains the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpFftStnEntry  

rlIpFftStnIndex 1.3.6.1.4.1.89.47.1.13.1.1
The value of the index of the IP FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftStnMrid 1.3.6.1.4.1.89.47.1.13.1.2
The router's Instance Identifier in the SFFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftStnDstIpAddress 1.3.6.1.4.1.89.47.1.13.1.3
The IP destination address for which this entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftStnDstRouteIpMask 1.3.6.1.4.1.89.47.1.13.1.4
The IP destination mask for which this entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftStnDstIpAddrType 1.3.6.1.4.1.89.47.1.13.1.5
The IP destination address type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

rlIpFftStnDstMacAddress 1.3.6.1.4.1.89.47.1.13.1.6
The MAC destination address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpFftStnSrcMacAddress 1.3.6.1.4.1.89.47.1.13.1.7
The MAC source address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpFftStnOutIfIndex 1.3.6.1.4.1.89.47.1.13.1.8
The value of ifIndex of output physical port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftStnVid 1.3.6.1.4.1.89.47.1.13.1.9
The vid of the output port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftStnTaggedMode 1.3.6.1.4.1.89.47.1.13.1.10
The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field gets the BasedPortConfig value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER untagged(1), tagged(2), basedPortConfig(3)  

rlIpFftStnAge 1.3.6.1.4.1.89.47.1.13.1.11
The age of the entry in seconds from the inserting.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubTable 1.3.6.1.4.1.89.47.1.14
The (conceptual) table containing IP Fast Forwarding information per subnet for IP datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpFftSubEntry

rlIpFftSubEntry 1.3.6.1.4.1.89.47.1.14.1
An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpFftSubEntry  

rlIpFftSubMrid 1.3.6.1.4.1.89.47.1.14.1.1
The router's Instance Identifier in the NFFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubDstIpSubnet 1.3.6.1.4.1.89.47.1.14.1.2
The IP destination subnet for which this entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftSubDstIpMask 1.3.6.1.4.1.89.47.1.14.1.3
The IP destination mask for which this entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftSubAge 1.3.6.1.4.1.89.47.1.14.1.4
The age of the entry in seconds from the inserting.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubNextHopSetRefCount 1.3.6.1.4.1.89.47.1.14.1.5
The number of NFFT entries that used the given NextHop set (ECMP path).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubNextHopCount 1.3.6.1.4.1.89.47.1.14.1.6
The number of used NextHops in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubNextHopIfindex1 1.3.6.1.4.1.89.47.1.14.1.7
The first NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubNextHopIpAddr1 1.3.6.1.4.1.89.47.1.14.1.8
The first NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftSubNextHopIfindex2 1.3.6.1.4.1.89.47.1.14.1.9
The second NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubNextHopIpAddr2 1.3.6.1.4.1.89.47.1.14.1.10
The second NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftSubNextHopIfindex3 1.3.6.1.4.1.89.47.1.14.1.11
The third NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubNextHopIpAddr3 1.3.6.1.4.1.89.47.1.14.1.12
The third NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftSubNextHopIfindex4 1.3.6.1.4.1.89.47.1.14.1.13
The fourth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubNextHopIpAddr4 1.3.6.1.4.1.89.47.1.14.1.14
The fourth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftSubNextHopIfindex5 1.3.6.1.4.1.89.47.1.14.1.15
The fifth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubNextHopIpAddr5 1.3.6.1.4.1.89.47.1.14.1.16
The fifth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftSubNextHopIfindex6 1.3.6.1.4.1.89.47.1.14.1.17
The six NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubNextHopIpAddr6 1.3.6.1.4.1.89.47.1.14.1.18
The six NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftSubNextHopIfindex7 1.3.6.1.4.1.89.47.1.14.1.19
The seven NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubNextHopIpAddr7 1.3.6.1.4.1.89.47.1.14.1.20
The seven NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftSubNextHopIfindex8 1.3.6.1.4.1.89.47.1.14.1.21
The eight NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftSubNextHopIpAddr8 1.3.6.1.4.1.89.47.1.14.1.22
The eight NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftCountersTable 1.3.6.1.4.1.89.47.1.15
The (conceptual) table containing IP Counters information per one IP FFT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpFftCountersEntry

rlIpFftCountersEntry 1.3.6.1.4.1.89.47.1.15.1
An entry (conceptual row) containing the IP Counters information containing amount of IP datagrams passed by certain IP FFT.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpFftCountersEntry  

rlIpFftCountersIndex 1.3.6.1.4.1.89.47.1.15.1.1
The value of the index of the IP FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftInReceives 1.3.6.1.4.1.89.47.1.15.1.2
The amount of received IP datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftForwDatagrams 1.3.6.1.4.1.89.47.1.15.1.3
The amount of forwarded IP datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftInDiscards 1.3.6.1.4.1.89.47.1.15.1.4
The amount of discarded IP datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftNextHopTable 1.3.6.1.4.1.89.47.1.16
The (conceptual) table contains NextHop information used for routing IP datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpFftNextHopEntry

rlIpFftNextHopEntry 1.3.6.1.4.1.89.47.1.16.1
An entry (conceptual row) contains the NextHop info information for routing IP datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpFftNextHopEntry  

rlIpFftNextHopifindex 1.3.6.1.4.1.89.47.1.16.1.1
The value of the IP Interface index of the NextHop.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftNextHopIpAddress 1.3.6.1.4.1.89.47.1.16.1.2
The IP address of a NextHop for which an entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpFftNextHopValid 1.3.6.1.4.1.89.47.1.16.1.3
The NextHop Valid bit. When L2 info is missing, a NextHop has Invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

rlIpFftNextHopType 1.3.6.1.4.1.89.47.1.16.1.4
The NextHop type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2), reject(3), drop(4)  

rlIpFftNextHopReferenceCount 1.3.6.1.4.1.89.47.1.16.1.5
IF LPM is supported: If ecmp supported: the field NextHop_ref_count used to save number of NextHop SETs that use the NextHop. Otherwise, NextHop_ref_count used to save number of NFFT entries that use the NextHop. IF LPM is NOT supported: NextHop_ref_count used to save number of Remote SFFT entries that use the NextHop.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftNextHopNetAddress 1.3.6.1.4.1.89.47.1.16.1.6
The NextHop Physical Address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpFftNextHopVid 1.3.6.1.4.1.89.47.1.16.1.7
The vid of the output port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftNextHopMacAddress 1.3.6.1.4.1.89.47.1.16.1.8
The MAC destination address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpFftNextHopOutIfIndex 1.3.6.1.4.1.89.47.1.16.1.9
The value of ifIndex of output physical port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftL2InfoTable 1.3.6.1.4.1.89.47.1.17
The (conceptual) table contains L2 information used for routing IP datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpFftL2InfoEntry

rlIpFftL2InfoEntry 1.3.6.1.4.1.89.47.1.17.1
An entry (conceptual row) contains the L2 info information for routing IP datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpFftL2InfoEntry  

rlIpFftL2InfoIfindex 1.3.6.1.4.1.89.47.1.17.1.1
The VLAN Ifindex of the destination port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftL2InfoDstMacAddress 1.3.6.1.4.1.89.47.1.17.1.2
The MAC destination address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpFftL2InfoValid 1.3.6.1.4.1.89.47.1.17.1.3
The L2 info entry valid bit. When L2 info is missing some information, an L2 info has Invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

rlIpFftL2InfoType 1.3.6.1.4.1.89.47.1.17.1.4
The L2 info type. With Enthernet media l2 info type is vlan. WIth Tunneling feature, l2 info type will be expanded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), vlan(2)  

rlIpFftL2InfoReferenceCount 1.3.6.1.4.1.89.47.1.17.1.5
The reference count contains a number of NextHop entries that use this L2 info.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftL2InfoVid 1.3.6.1.4.1.89.47.1.17.1.6
The vid of the destination port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftL2InfoSrcMacAddress 1.3.6.1.4.1.89.47.1.17.1.7
The MAC source address placed to Ehernet Header of IP forwarded packet.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpFftL2InfoOutIfIndex 1.3.6.1.4.1.89.47.1.17.1.8
The value of ifIndex of output physical port the packet is forwarded through.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpFftL2InfoTaggedMode 1.3.6.1.4.1.89.47.1.17.1.9
The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field get the BasedPortConfig value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER untagged(1), tagged(2), basedPortConfig(3)  

rlIpxFFT 1.3.6.1.4.1.89.47.2
OBJECT IDENTIFIER    

rlIpxFftMibVersion 1.3.6.1.4.1.89.47.2.1
MIB's version, the current version is 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxMaxFftNumber 1.3.6.1.4.1.89.47.2.2
The maximun number of IPX FFTs. An IPX FFT gets a number from 1 until rlIpxMaxFftSetNumber.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftDynamicSupported 1.3.6.1.4.1.89.47.2.3
Specifies whether dynamic IPX FFTs are supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpxFftNetworkSupported 1.3.6.1.4.1.89.47.2.4
Specifies whether subtable per IPX network is supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpxFftUnknownAddrMsgUsed 1.3.6.1.4.1.89.47.2.5
Specifies whether the 3SW uses the unknown address message.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER used(1), unused(2)  

rlIpxFftAgingTimeSupported 1.3.6.1.4.1.89.47.2.6
Specifies whether aging time is supported for subtable per station.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpxFftSrcAddrSupported 1.3.6.1.4.1.89.47.2.7
Specifies whether an IPX subtable per station contains source IPX address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpxFftAgingTimeout 1.3.6.1.4.1.89.47.2.8
The aging timeout in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

rlIpxFftRedBoundary 1.3.6.1.4.1.89.47.2.9
The red boundary in percents.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rlIpxFftYellowBoundary 1.3.6.1.4.1.89.47.2.10
The yellow boundary in percents.
Status: current Access: read-write
OBJECT-TYPE    
  Percents  

rlIpxFftNumTable 1.3.6.1.4.1.89.47.2.12
The (conceptual) table containing number routes of the IPX Fast Forwarding Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpxFftNumEntry

rlIpxFftNumEntry 1.3.6.1.4.1.89.47.2.12.1
An entry (conceptual row) containing the containing number routes of of IPX SFFT and IPX NFFT
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpxFftNumEntry  

rlIpxFftNumIndex 1.3.6.1.4.1.89.47.2.12.1.1
The value of the index of the IPX FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftNumStnRoutesNumber 1.3.6.1.4.1.89.47.2.12.1.2
The number of routes containing in the IPX SFFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftNumSubRoutesNumber 1.3.6.1.4.1.89.47.2.12.1.3
The number of routes containing in the IPX NFFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftStnTable 1.3.6.1.4.1.89.47.2.13
The (conceptual) table containing IPX Fast Forwarding information per station for IPX.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpxFftStnEntry

rlIpxFftStnEntry 1.3.6.1.4.1.89.47.2.13.1
An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpxFftStnEntry  

rlIpxFftStnIndex 1.3.6.1.4.1.89.47.2.13.1.1
The value of the index of the IPX FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftStnDstNetid 1.3.6.1.4.1.89.47.2.13.1.2
The destination network for which this entry contains IPX forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  NetNumber  

rlIpxFftStnDstNode 1.3.6.1.4.1.89.47.2.13.1.3
The destination node for which this entry contains IPX forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpxFftStnSrcNetid 1.3.6.1.4.1.89.47.2.13.1.4
The source network for which this entry contains IPX forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  NetNumber  

rlIpxFftStnSrcNode 1.3.6.1.4.1.89.47.2.13.1.5
The destination node for which this entry contains IPX forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpxFftStnDstIpxAddrType 1.3.6.1.4.1.89.47.2.13.1.6
The destination address type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

rlIpxFftStnEncapsulation 1.3.6.1.4.1.89.47.2.13.1.7
The encapsulation method associated with this route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER novell(1), ethernet(2), llc(3), snap(4)  

rlIpxFftStnDstMacAddress 1.3.6.1.4.1.89.47.2.13.1.8
The MAC destination address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpxFftStnSrcMacAddress 1.3.6.1.4.1.89.47.2.13.1.9
The MAC source address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpxFftStnOutIfIndex 1.3.6.1.4.1.89.47.2.13.1.10
The value of ifIndex of output physical port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftStnTci 1.3.6.1.4.1.89.47.2.13.1.11
The value of TCI or 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftStnFacsIndex 1.3.6.1.4.1.89.47.2.13.1.12
The value of index of the FACS Table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftStnAge 1.3.6.1.4.1.89.47.2.13.1.13
The age of the entry in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftSubTable 1.3.6.1.4.1.89.47.2.14
The (conceptual) table containing IPX Fast Forwarding information per network for IPX .
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpxFftSubEntry

rlIpxFftSubEntry 1.3.6.1.4.1.89.47.2.14.1
An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpxFftSubEntry  

rlIpxFftSubIndex 1.3.6.1.4.1.89.47.2.14.1.1
The value of the index of the IPX FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftSubDstNetid 1.3.6.1.4.1.89.47.2.14.1.2
The destination network for which this entry contains IPX forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  NetNumber  

rlIpxFftSubEncapsulation 1.3.6.1.4.1.89.47.2.14.1.3
The encapsulation method associated with this route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER novell(1), ethernet(2), llc(3), snap(4)  

rlIpxFftSubDstMacAddress 1.3.6.1.4.1.89.47.2.14.1.4
The MAC destination address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpxFftSubSrcMacAddress 1.3.6.1.4.1.89.47.2.14.1.5
The MAC source address.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

rlIpxFftSubOutIfIndex 1.3.6.1.4.1.89.47.2.14.1.6
The value of ifIndex of output physical port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftSubTci 1.3.6.1.4.1.89.47.2.14.1.7
The value of TCI or 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftSubFacsIndex 1.3.6.1.4.1.89.47.2.14.1.8
The value of index of the FACS Table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftSubAge 1.3.6.1.4.1.89.47.2.14.1.9
The age of the entry in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftCountersTable 1.3.6.1.4.1.89.47.2.15
The (conceptual) table containing IPX Counters information per one IPX FFT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpxFftCountersEntry

rlIpxFftCountersEntry 1.3.6.1.4.1.89.47.2.15.1
An entry (conceptual row) containing the IP Counters information containing amount of IPX datagrams passed by certain IPX FFT.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpxFftCountersEntry  

rlIpxFftCountersIndex 1.3.6.1.4.1.89.47.2.15.1.1
The value of the index of the IPX FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftInReceives 1.3.6.1.4.1.89.47.2.15.1.2
The amount of received IPX datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftForwDatagrams 1.3.6.1.4.1.89.47.2.15.1.3
The amount of forwarded IPX datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpxFftInDiscards 1.3.6.1.4.1.89.47.2.15.1.4
The amount of discarded IPX datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFFT 1.3.6.1.4.1.89.47.3
OBJECT IDENTIFIER    

rlIpmFftMibVersion 1.3.6.1.4.1.89.47.3.1
MIB's version, the current version is 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmMaxFftNumber 1.3.6.1.4.1.89.47.3.2
The maximun number of IPM FFTs. NT_IPM gets a number from Host Parameters
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftDynamicSupported 1.3.6.1.4.1.89.47.3.3
Specifies whether dynamic IPM FFTs are supported. An NT_IPM gets a number from Host Parameters
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

rlIpmFftUnknownAddrMsgUsed 1.3.6.1.4.1.89.47.3.4
Specifies whether the 3SW uses the unknown address message. An NT_IPM gets a number from Host Parameters
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER used(1), unused(2)  

rlIpmFftUserAgingTimeout 1.3.6.1.4.1.89.47.3.5
The aging timeout in seconds. SNMP user writes. There is a default value of aging timeout.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

rlIpmFftRouterAgingTimeout 1.3.6.1.4.1.89.47.3.6
The aging timeout in seconds. NT_IPM keeps value that Router level gave. This is high priority value for aging timeout.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftNumTable 1.3.6.1.4.1.89.47.3.8
The (conceptual) table containing number routes of the IPM Fast Forwarding Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpmFftNumEntry

rlIpmFftNumEntry 1.3.6.1.4.1.89.47.3.8.1
An entry (conceptual row) containing the containing number routes of an IPM FFT.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpmFftNumEntry  

rlIpmFftNumIndex 1.3.6.1.4.1.89.47.3.8.1.1
The value of the index of the IPM FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftNumRoutesNumber 1.3.6.1.4.1.89.47.3.8.1.2
The number of routes containing in the IPM FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftTable 1.3.6.1.4.1.89.47.3.9
The (conceptual) table containing IPM Fast Forwarding information for IPM datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpmFftEntry

rlIpmFftEntry 1.3.6.1.4.1.89.47.3.9.1
An entry (conceptual row) containing the IPM fast forwarding information for IP datagrams from a particular source and destination addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpmFftEntry  

rlIpmFftIndex 1.3.6.1.4.1.89.47.3.9.1.1
The value of the index of the IPM FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftSrcIpAddress 1.3.6.1.4.1.89.47.3.9.1.2
The IP source address for which this entry contains IPM forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpmFftDstIpAddress 1.3.6.1.4.1.89.47.3.9.1.3
The IPM destination address for which this entry contains IPM forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpmFftSrcIpMask 1.3.6.1.4.1.89.47.3.9.1.4
The IP source mask for which this entry contains IP forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpmFftInputIfIndex 1.3.6.1.4.1.89.47.3.9.1.5
The input ifIndex for which this entry contains IPM forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftInputVlanTag 1.3.6.1.4.1.89.47.3.9.1.6
The input Vlan tag together with input ifIndex defines pair (ifIndex, tag)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftForwardAction 1.3.6.1.4.1.89.47.3.9.1.7
The IPM forward action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER forward(1), discard(2)  

rlIpmFftInportAction 1.3.6.1.4.1.89.47.3.9.1.8
The IPM illegal input port action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sentToCPU(1), discard(2)  

rlIpmFftAge 1.3.6.1.4.1.89.47.3.9.1.9
The age of the entry in seconds from the moment of inserting.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftPortTagTable 1.3.6.1.4.1.89.47.3.10
The (conceptual) table containing IPM FFT output port tag information for IPM datagrams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpmFftPortTagEntry

rlIpmFftPortTagEntry 1.3.6.1.4.1.89.47.3.10.1
An entry (conceptual row) containing the IPM FFT output port tag information for IP datagrams from a particular source and destination addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpmFftPortTagEntry  

rlIpmFftPortIndex 1.3.6.1.4.1.89.47.3.10.1.1
The value of the index of the IPM FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftPortSrcIpAddress 1.3.6.1.4.1.89.47.3.10.1.2
The IP source address for which this entry contains IPM output port tag information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpmFftPortDstIpAddress 1.3.6.1.4.1.89.47.3.10.1.3
The IPM destination address for which this entry contains IPM port tag information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlIpmFftPortOutputifIndex 1.3.6.1.4.1.89.47.3.10.1.4
The output ifIndex
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftPortOutputTag 1.3.6.1.4.1.89.47.3.10.1.5
The output Vlan tag together with output ifIndex defines pair (ifIndex, tag)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftCountersTable 1.3.6.1.4.1.89.47.3.11
The (conceptual) table containing IPM Counters information per FFT number.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlIpmFftCountersEntry

rlIpmFftCountersEntry 1.3.6.1.4.1.89.47.3.11.1
An entry (conceptual row) containing the IPM Counters information containing amount of IPM datagrams passed by certain FFT.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlIpmFftCountersEntry  

rlIpmFftCountersIndex 1.3.6.1.4.1.89.47.3.11.1.1
The value of the index of the IPM FFT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftInReceives 1.3.6.1.4.1.89.47.3.11.1.2
The amount of received IPM datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftForwDatagrams 1.3.6.1.4.1.89.47.3.11.1.3
The amount of forwarded IPM datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rlIpmFftInDiscards 1.3.6.1.4.1.89.47.3.11.1.4
The amount of discarded IPM datagrams
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor