RC-2K-QOS-MIB

File: RC-2K-QOS-MIB.mib (48070 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
RC-2K-MIB RAPID-CITY

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter64 DisplayString TruthValue
RowStatus InterfaceIndex rc2kQos
EnableValue

Defined Types

Rc2kQosQosEntry  
SEQUENCE    
  rc2kQosQosRow INTEGER
  rc2kQosQosLevel INTEGER
  rc2kQosQosName DisplayString
  rc2kQosQosAdminWeight Integer32
  rc2kQosQosOperWeight Integer32
  rc2kQosOctapidMode INTEGER
  rc2kQosQosAdminThreshold INTEGER
  rc2kQosQosOperThreshold INTEGER
  rc2kQosPidMode INTEGER
  rc2kQosQosDropThresholdPercentage INTEGER
  rc2kQosQosDropActualPercentage INTEGER
  rc2kQosQosDropTrapState EnableValue

Rc2kQosIngressTagToQosEntry  
SEQUENCE    
  rc2kQosIngressTagToQosRow INTEGER
  rc2kQosIngressTagToQosInIeee8021P INTEGER
  rc2kQosIngressTagToQosQosLevel INTEGER

Rc2kQosIngressDsFieldToQosEntry  
SEQUENCE    
  rc2kQosIngressDsFieldToQosRow INTEGER
  rc2kQosIngressDsFieldToQosInDsField INTEGER
  rc2kQosIngressDsFieldToQosQosLevel INTEGER

Rc2kQosEgressQosToTagEntry  
SEQUENCE    
  rc2kQosEgressQosToTagRow INTEGER
  rc2kQosEgressQosToTagQosLevel INTEGER
  rc2kQosEgressQosToTagOutIeee8021P INTEGER

Rc2kQosEgressQosToDsFieldEntry  
SEQUENCE    
  rc2kQosEgressQosToDsFieldRow INTEGER
  rc2kQosEgressQosToDsFieldQosLevel INTEGER
  rc2kQosEgressQosToDsFieldOutDsField INTEGER

Rc2kQosTrafficProfileEntry  
SEQUENCE    
  rc2kQosTrafficProfileId INTEGER
  rc2kQosTrafficProfileName DisplayString
  rc2kQosTrafficProfileEnable TruthValue
  rc2kQosTrafficProfileTranslateDscpEnable TruthValue
  rc2kQosTrafficProfileInProfileDscp DisplayString
  rc2kQosTrafficProfileOutProfileDscp DisplayString
  rc2kQosTrafficProfileDiscardEnable TruthValue
  rc2kQosTrafficProfileAverageRate Integer32
  rc2kQosTrafficProfilePeakRate Integer32
  rc2kQosTrafficProfileRowStatus RowStatus

Rc2kQosIngressDscpToQosEntry  
SEQUENCE    
  rc2kQosIngressDscpToQosRow INTEGER
  rc2kQosIngressDscpToQosInDscp INTEGER
  rc2kQosIngressDscpToQosInDscpBinaryFormat DisplayString
  rc2kQosIngressDscpToQosQosLevel INTEGER

Rc2kQosEgressQosToDscpEntry  
SEQUENCE    
  rc2kQosEgressQosToDscpRow INTEGER
  rc2kQosEgressQosToDscpQosLevel INTEGER
  rc2kQosEgressQosToDscpOutDscp INTEGER
  rc2kQosEgressQosToDscpOutDscpBinaryFormat DisplayString

Rc2kQosEgressGreenColorQosToTagEntry  
SEQUENCE    
  rc2kQosEgressGreenColorQosToTagRow INTEGER
  rc2kQosEgressGreenColorQosToTagQosLevel INTEGER
  rc2kQosEgressGreenColorQosToTagOutIeee8021P INTEGER

Rc2kQosEgressYellowColorQosToTagEntry  
SEQUENCE    
  rc2kQosEgressYellowColorQosToTagRow INTEGER
  rc2kQosEgressYellowColorQosToTagQosLevel INTEGER
  rc2kQosEgressYellowColorQosToTagOutIeee8021P INTEGER

Rc2kQosEgressRedColorQosToTagEntry  
SEQUENCE    
  rc2kQosEgressRedColorQosToTagRow INTEGER
  rc2kQosEgressRedColorQosToTagQosLevel INTEGER
  rc2kQosEgressRedColorQosToTagOutIeee8021P INTEGER

Rc2kQosWredThresholdHighDropEntry  
SEQUENCE    
  rc2kQosWredThresholdHighDropColor INTEGER
  rc2kQosWredThresholdHighDropQmin INTEGER
  rc2kQosWredThresholdHighDropQmax INTEGER

Rc2kQosWredThresholdMediumDropEntry  
SEQUENCE    
  rc2kQosWredThresholdMediumDropColor INTEGER
  rc2kQosWredThresholdMediumDropQmin INTEGER
  rc2kQosWredThresholdMediumDropQmax INTEGER

Rc2kQosWredThresholdLowDropEntry  
SEQUENCE    
  rc2kQosWredThresholdLowDropColor INTEGER
  rc2kQosWredThresholdLowDropQmin INTEGER
  rc2kQosWredThresholdLowDropQmax INTEGER

Rc2kQosStatsEntry  
SEQUENCE    
  rc2kQosStatsIfIndex InterfaceIndex
  rc2kQosStatsTxPbit0Pages Counter64
  rc2kQosStatsDrPbit0Pages Counter64
  rc2kQosStatsTxPbit1Pages Counter64
  rc2kQosStatsDrPbit1Pages Counter64
  rc2kQosStatsTxPbit2Pages Counter64
  rc2kQosStatsDrPbit2Pages Counter64
  rc2kQosStatsTxPbit3Pages Counter64
  rc2kQosStatsDrPbit3Pages Counter64
  rc2kQosStatsTxPbit4Pages Counter64
  rc2kQosStatsDrPbit4Pages Counter64
  rc2kQosStatsTxPbit5Pages Counter64
  rc2kQosStatsDrPbit5Pages Counter64
  rc2kQosStatsTxPbit6Pages Counter64
  rc2kQosStatsDrPbit6Pages Counter64
  rc2kQosStatsTxPbit7Pages Counter64
  rc2kQosStatsDrPbit7Pages Counter64

Rc2kQosEgressQosPCPEntry  
SEQUENCE    
  rc2kQosEgressQosPCPRow Integer32
  rc2kQosEgressQosPCPLevel Integer32
  rc2kQosEgressQosPCPInProfileIeee8021P Integer32
  rc2kQosEgressQosPCPOutOfProfileIeee8021P Integer32

Rc2kQosFabricInterfaceStatsEntry  
SEQUENCE    
  rc2kQosFabricInterfaceStatsSlotNumber Integer32
  rc2kQosFabricInterfaceStatsLaneNumber Integer32
  rc2kQosFabricInterfaceStatsFOQDropEvents Counter64
  rc2kQosFabricInterfaceStatsFOQTotalDropEvents Counter64
  rc2kQosFabricInterfaceStatsFabricDropEvents Counter64
  rc2kQosFabricInterfaceStatsFabricTotalDropEvents Counter64

Defined Values

rc2kQosMib 1.3.6.1.4.1.2272.1.100.8.0
Enterprise MIB for the Accelar product family.
MODULE-IDENTITY    

rc2kQosQosTable 1.3.6.1.4.1.2272.1.100.8.1
This table is used to define the Quality Of Service(QOS) profiles for the system. The system can support eight different QOS levels. Each QOS level can be individually configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosQosEntry

rc2kQosQosEntry 1.3.6.1.4.1.2272.1.100.8.1.1
QOS profile entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosQosEntry  

rc2kQosQosRow 1.3.6.1.4.1.2272.1.100.8.1.1.1
Used to uniquely identify a row in this table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosQosLevel 1.3.6.1.4.1.2272.1.100.8.1.1.2
QOS level
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosQosName 1.3.6.1.4.1.2272.1.100.8.1.1.3
Qos level name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

rc2kQosQosAdminWeight 1.3.6.1.4.1.2272.1.100.8.1.1.4
Administrative transmit opportunity percentage
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rc2kQosQosOperWeight 1.3.6.1.4.1.2272.1.100.8.1.1.5
Operational transmit opportunity percentage
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rc2kQosOctapidMode 1.3.6.1.4.1.2272.1.100.8.1.1.6
Octapid mode
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER modeSingle(1), mode100(2)  

rc2kQosQosAdminThreshold 1.3.6.1.4.1.2272.1.100.8.1.1.7
Administrative queue threshold
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), oneEight(1), oneQuarter(2), threeEight(3), halfSdram(4), fiveEight(5), threeQuarter(6), sevenEights(7), allSdram(8), notpresent(9)  

rc2kQosQosOperThreshold 1.3.6.1.4.1.2272.1.100.8.1.1.8
Operational queue threshold
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), oneEight(1), oneQuarter(2), threeEight(3), halfSdram(4), fiveEight(5), threeQuarter(6), sevenEights(7), allSdram(8), notpresent(9)  

rc2kQosPidMode 1.3.6.1.4.1.2272.1.100.8.1.1.9
Pid mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER modeSingle(1), mode100(2)  

rc2kQosQosDropThresholdPercentage 1.3.6.1.4.1.2272.1.100.8.1.1.10
The threshold percentage for QoS trap timer for a particular queuing class
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

rc2kQosQosDropActualPercentage 1.3.6.1.4.1.2272.1.100.8.1.1.11
The actual page drop percentage on a queue
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

rc2kQosQosDropTrapState 1.3.6.1.4.1.2272.1.100.8.1.1.12
Disable/enable page drop traps for a particular queuing class
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rc2kQosIngressTagToQosTable 1.3.6.1.4.1.2272.1.100.8.2
This table is used to specify the 802.1P to QOS (802.1P->QOS) mapping on packet ingress.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosIngressTagToQosEntry

rc2kQosIngressTagToQosEntry 1.3.6.1.4.1.2272.1.100.8.2.1
Entry containing infomation of 8021P->Qos mapping
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosIngressTagToQosEntry  

rc2kQosIngressTagToQosRow 1.3.6.1.4.1.2272.1.100.8.2.1.1
Used to uniquely identify a row in this table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosIngressTagToQosInIeee8021P 1.3.6.1.4.1.2272.1.100.8.2.1.2
802.1P
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosIngressTagToQosQosLevel 1.3.6.1.4.1.2272.1.100.8.2.1.3
Qos level
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosIngressDsFieldToQosTable 1.3.6.1.4.1.2272.1.100.8.3
This table is used to specify the DSCP field to QOS (DsField->QOS) mapping on packet ingress.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosIngressDsFieldToQosEntry

rc2kQosIngressDsFieldToQosEntry 1.3.6.1.4.1.2272.1.100.8.3.1
Entry containing infomation of DsField->Qos mapping
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  Rc2kQosIngressDsFieldToQosEntry  

rc2kQosIngressDsFieldToQosRow 1.3.6.1.4.1.2272.1.100.8.3.1.1
Used to uniquely identify a row in this table.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

rc2kQosIngressDsFieldToQosInDsField 1.3.6.1.4.1.2272.1.100.8.3.1.2
diffserv dsField
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

rc2kQosIngressDsFieldToQosQosLevel 1.3.6.1.4.1.2272.1.100.8.3.1.3
qos level
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressQosToTagTable 1.3.6.1.4.1.2272.1.100.8.4
This table is used to specify the QOS to 802.1P (QOS->802.1P) mapping on packet egress.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosEgressQosToTagEntry

rc2kQosEgressQosToTagEntry 1.3.6.1.4.1.2272.1.100.8.4.1
Entry containing infomation of Qos->Qos mapping
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosEgressQosToTagEntry  

rc2kQosEgressQosToTagRow 1.3.6.1.4.1.2272.1.100.8.4.1.1
Used to uniquely identify a row in this table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosEgressQosToTagQosLevel 1.3.6.1.4.1.2272.1.100.8.4.1.2
qos level
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressQosToTagOutIeee8021P 1.3.6.1.4.1.2272.1.100.8.4.1.3
802.1P
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressQosToDsFieldTable 1.3.6.1.4.1.2272.1.100.8.5
This table is used to specify the QOS to DSCP field (QOS->DsField) mapping on packet egress.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosEgressQosToDsFieldEntry

rc2kQosEgressQosToDsFieldEntry 1.3.6.1.4.1.2272.1.100.8.5.1
Entry containing infomation of Qos->Qos mapping
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  Rc2kQosEgressQosToDsFieldEntry  

rc2kQosEgressQosToDsFieldRow 1.3.6.1.4.1.2272.1.100.8.5.1.1
Used to uniquely identify a row in this table.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosEgressQosToDsFieldQosLevel 1.3.6.1.4.1.2272.1.100.8.5.1.2
qos level
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressQosToDsFieldOutDsField 1.3.6.1.4.1.2272.1.100.8.5.1.3
diffserv dsField
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

rc2kQosTrafficProfileTable 1.3.6.1.4.1.2272.1.100.8.6
This table is used to specify traffic profiles for the system. These traffic profiles are used for policying purposes to guarantee streams of traffic do not egress the system above a certain rate. These traffic profiles are applied in the 'rcIpFilterTable'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosTrafficProfileEntry

rc2kQosTrafficProfileEntry 1.3.6.1.4.1.2272.1.100.8.6.1
Entry containing infomation of Qos->Qos mapping
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosTrafficProfileEntry  

rc2kQosTrafficProfileId 1.3.6.1.4.1.2272.1.100.8.6.1.1
Profile id
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

rc2kQosTrafficProfileName 1.3.6.1.4.1.2272.1.100.8.6.1.2
Profile name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

rc2kQosTrafficProfileEnable 1.3.6.1.4.1.2272.1.100.8.6.1.3
Enable this entry
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rc2kQosTrafficProfileTranslateDscpEnable 1.3.6.1.4.1.2272.1.100.8.6.1.4
Used to specify whether translation of the DSCP field should be performed. If enabled, the value in the DSCP field for packets that fall within the traffic profile will get translated to 'rc2kQosTrafficProfileInProfileDscp'. Packets that fall outside the traffic profile will get translated to 'rc2kQosTrafficProfileOutProfileDscp'. If disabled, no translation is performed.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rc2kQosTrafficProfileInProfileDscp 1.3.6.1.4.1.2272.1.100.8.6.1.5
Used to specify the DSCP value for 'good' packets.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(6)  

rc2kQosTrafficProfileOutProfileDscp 1.3.6.1.4.1.2272.1.100.8.6.1.6
Used to specify the DSCP value for 'violation' packets.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(6)  

rc2kQosTrafficProfileDiscardEnable 1.3.6.1.4.1.2272.1.100.8.6.1.7
Used to specify whether packets that fall outside the traffic profile should be discarded.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rc2kQosTrafficProfileAverageRate 1.3.6.1.4.1.2272.1.100.8.6.1.8
Average rate in packets per second.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rc2kQosTrafficProfilePeakRate 1.3.6.1.4.1.2272.1.100.8.6.1.9
Peak rate in packets per second.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

rc2kQosTrafficProfileRowStatus 1.3.6.1.4.1.2272.1.100.8.6.1.10
Used to create/delete entries.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rc2kQosIngressDscpToQosTable 1.3.6.1.4.1.2272.1.100.8.7
This table is used to specify the DSCP to QOS (Dscp->QOS) mapping on packet ingress.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosIngressDscpToQosEntry

rc2kQosIngressDscpToQosEntry 1.3.6.1.4.1.2272.1.100.8.7.1
Entry containing information of Dscp->Qos mapping
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosIngressDscpToQosEntry  

rc2kQosIngressDscpToQosRow 1.3.6.1.4.1.2272.1.100.8.7.1.1
Used to uniquely identify a row in this table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

rc2kQosIngressDscpToQosInDscp 1.3.6.1.4.1.2272.1.100.8.7.1.2
A 6-bit value used to define the Differentiated Service Code Point(DSCP).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

rc2kQosIngressDscpToQosInDscpBinaryFormat 1.3.6.1.4.1.2272.1.100.8.7.1.3
The 'rc2kQosIngressDscpToQosInDscp' value shown in a binary format (network order).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(6)  

rc2kQosIngressDscpToQosQosLevel 1.3.6.1.4.1.2272.1.100.8.7.1.4
qos level
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressQosToDscpTable 1.3.6.1.4.1.2272.1.100.8.8
This table is used to specify the QOS to DSCP field (QOS->DsField) mapping on packet egress.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosEgressQosToDscpEntry

rc2kQosEgressQosToDscpEntry 1.3.6.1.4.1.2272.1.100.8.8.1
Entry containing infomation of Qos->Qos mapping
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosEgressQosToDscpEntry  

rc2kQosEgressQosToDscpRow 1.3.6.1.4.1.2272.1.100.8.8.1.1
Used to uniquely identify a row in this table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosEgressQosToDscpQosLevel 1.3.6.1.4.1.2272.1.100.8.8.1.2
qos level
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressQosToDscpOutDscp 1.3.6.1.4.1.2272.1.100.8.8.1.3
A 6-bit value used to define the Differentiated Service Code Point(DSCP).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

rc2kQosEgressQosToDscpOutDscpBinaryFormat 1.3.6.1.4.1.2272.1.100.8.8.1.4
The 'rc2kQosEgressQosToDscpOutDscp' value show in a binary format (network order).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(6)  

rc2kQosEgressGreenColorQosToTagTable 1.3.6.1.4.1.2272.1.100.8.9
This table is used to specify the green color QOS to 802.1P (QOS -> 802.1P) mapping on packet egress.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosEgressGreenColorQosToTagEntry

rc2kQosEgressGreenColorQosToTagEntry 1.3.6.1.4.1.2272.1.100.8.9.1
Entry containing infomation of Qos -> Qos mapping for green colored packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosEgressGreenColorQosToTagEntry  

rc2kQosEgressGreenColorQosToTagRow 1.3.6.1.4.1.2272.1.100.8.9.1.1
Used to uniquely identify a row in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosEgressGreenColorQosToTagQosLevel 1.3.6.1.4.1.2272.1.100.8.9.1.2
Qos level
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressGreenColorQosToTagOutIeee8021P 1.3.6.1.4.1.2272.1.100.8.9.1.3
802.1P. This value shows the Pbit mapping with Qos level on the egress packet
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressYellowColorQosToTagTable 1.3.6.1.4.1.2272.1.100.8.10
This table is used to specify the yellow color QOS to 802.1P (QOS -> 802.1P) mapping on packet egress.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosEgressYellowColorQosToTagEntry

rc2kQosEgressYellowColorQosToTagEntry 1.3.6.1.4.1.2272.1.100.8.10.1
Entry containing infomation of Qos -> Qos mapping for Yellow colored packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosEgressYellowColorQosToTagEntry  

rc2kQosEgressYellowColorQosToTagRow 1.3.6.1.4.1.2272.1.100.8.10.1.1
Used to uniquely identify a row in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosEgressYellowColorQosToTagQosLevel 1.3.6.1.4.1.2272.1.100.8.10.1.2
Qos level
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressYellowColorQosToTagOutIeee8021P 1.3.6.1.4.1.2272.1.100.8.10.1.3
802.1P, The value shows the Pbit Mapping with the Qos level on Egress packet
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressRedColorQosToTagTable 1.3.6.1.4.1.2272.1.100.8.11
This table is used to specify the red color QOS to 802.1P (QOS -> 802.1P) mapping on packet egress.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosEgressRedColorQosToTagEntry

rc2kQosEgressRedColorQosToTagEntry 1.3.6.1.4.1.2272.1.100.8.11.1
Entry containing infomation of Qos -> Qos mapping for red colored packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosEgressRedColorQosToTagEntry  

rc2kQosEgressRedColorQosToTagRow 1.3.6.1.4.1.2272.1.100.8.11.1.1
Used to uniquely identify a row in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..8  

rc2kQosEgressRedColorQosToTagQosLevel 1.3.6.1.4.1.2272.1.100.8.11.1.2
Qos level
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosEgressRedColorQosToTagOutIeee8021P 1.3.6.1.4.1.2272.1.100.8.11.1.3
802.1P. The value shows the Pbit mapping with the Qos level of Egress packet
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

rc2kQosWredThreshold 1.3.6.1.4.1.2272.1.100.8.12
OBJECT IDENTIFIER    

rc2kQosWredThresholdHighDropTable 1.3.6.1.4.1.2272.1.100.8.12.1
This table is used to specify the WRED drop thresholds for High Drop Curve Set
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosWredThresholdHighDropEntry

rc2kQosWredThresholdHighDropEntry 1.3.6.1.4.1.2272.1.100.8.12.1.1
Entry containing information for different Qmin and Qmax for High Drop Curve Set
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosWredThresholdHighDropEntry  

rc2kQosWredThresholdHighDropColor 1.3.6.1.4.1.2272.1.100.8.12.1.1.1
Colored Queue for WRED Threshold High Drop Curve Set.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER green(1), yellow(2), red(3), uncolored(4)  

rc2kQosWredThresholdHighDropQmin 1.3.6.1.4.1.2272.1.100.8.12.1.1.2
Minimum drop threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rc2kQosWredThresholdHighDropQmax 1.3.6.1.4.1.2272.1.100.8.12.1.1.3
Maximum drop threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rc2kQosWredThresholdMediumDropTable 1.3.6.1.4.1.2272.1.100.8.12.2
This table is used to specify the WRED drop thresholds for Medium Drop Curve Set
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosWredThresholdMediumDropEntry

rc2kQosWredThresholdMediumDropEntry 1.3.6.1.4.1.2272.1.100.8.12.2.1
Entry containing information for different Qmin and Qmax for Medium Drop Curve Set
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosWredThresholdMediumDropEntry  

rc2kQosWredThresholdMediumDropColor 1.3.6.1.4.1.2272.1.100.8.12.2.1.1
Colored Queue for WRED Threshold Medium Drop Curve Set.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER green(1), yellow(2), red(3), uncolored(4)  

rc2kQosWredThresholdMediumDropQmin 1.3.6.1.4.1.2272.1.100.8.12.2.1.2
Minimum drop threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rc2kQosWredThresholdMediumDropQmax 1.3.6.1.4.1.2272.1.100.8.12.2.1.3
Maximum drop threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rc2kQosWredThresholdLowDropTable 1.3.6.1.4.1.2272.1.100.8.12.3
This table is used to specify the WRED drop thresholds for Low Drop Curve Set
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosWredThresholdLowDropEntry

rc2kQosWredThresholdLowDropEntry 1.3.6.1.4.1.2272.1.100.8.12.3.1
Entry containing information for different Qmin and Qmax for Low Drop Curve Set
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosWredThresholdLowDropEntry  

rc2kQosWredThresholdLowDropColor 1.3.6.1.4.1.2272.1.100.8.12.3.1.1
Colored Queue for WRED Threshold Low Drop Curve Set.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER green(1), yellow(2), red(3), uncolored(4)  

rc2kQosWredThresholdLowDropQmin 1.3.6.1.4.1.2272.1.100.8.12.3.1.2
Minimum drop threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rc2kQosWredThresholdLowDropQmax 1.3.6.1.4.1.2272.1.100.8.12.3.1.3
Maximum drop threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rc2kQosDropTrapTimer 1.3.6.1.4.1.2272.1.100.8.13
The timer settings for traps being sent on discard of packets on QoS queues
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

rc2kQosStatsTable 1.3.6.1.4.1.2272.1.100.8.14
This table contains Qos statistic of the for all interface. Which includes Pbit Tx and drop by pages in 8 Qos level
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosStatsEntry

rc2kQosStatsEntry 1.3.6.1.4.1.2272.1.100.8.14.1
Qos Statistics table entry contain the pbit Tx and dorp of a interface
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosStatsEntry  

rc2kQosStatsIfIndex 1.3.6.1.4.1.2272.1.100.8.14.1.1
port number
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

rc2kQosStatsTxPbit0Pages 1.3.6.1.4.1.2272.1.100.8.14.1.2
Number of Pages Transmitted for p-bit 0
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsDrPbit0Pages 1.3.6.1.4.1.2272.1.100.8.14.1.3
Number of Pages Dropped for p-bit 0
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsTxPbit1Pages 1.3.6.1.4.1.2272.1.100.8.14.1.4
Number of Pages Transmitted for p-bit 1
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsDrPbit1Pages 1.3.6.1.4.1.2272.1.100.8.14.1.5
Number of Pages Dropped for p-bit 1
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsTxPbit2Pages 1.3.6.1.4.1.2272.1.100.8.14.1.6
Number of Pages Transmitted for p-bit 2
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsDrPbit2Pages 1.3.6.1.4.1.2272.1.100.8.14.1.7
Number of Pages Dropped for p-bit 2
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsTxPbit3Pages 1.3.6.1.4.1.2272.1.100.8.14.1.8
Number of Pages Transmitted for p-bit 3
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsDrPbit3Pages 1.3.6.1.4.1.2272.1.100.8.14.1.9
Number of Pages Dropped for p-bit 3
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsTxPbit4Pages 1.3.6.1.4.1.2272.1.100.8.14.1.10
Number of Pages Transmitted for p-bit 4
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsDrPbit4Pages 1.3.6.1.4.1.2272.1.100.8.14.1.11
Number of Pages Dropped for p-bit 4
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsTxPbit5Pages 1.3.6.1.4.1.2272.1.100.8.14.1.12
Number of Pages Transmitted for p-bit 5
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsDrPbit5Pages 1.3.6.1.4.1.2272.1.100.8.14.1.13
Number of Pages Dropped for p-bit 5
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsTxPbit6Pages 1.3.6.1.4.1.2272.1.100.8.14.1.14
Number of Pages Transmitted for p-bit 6
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsDrPbit6Pages 1.3.6.1.4.1.2272.1.100.8.14.1.15
Number of Pages Dropped for p-bit 6
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsTxPbit7Pages 1.3.6.1.4.1.2272.1.100.8.14.1.16
Number of Pages Transmitted for p-bit 7
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosStatsDrPbit7Pages 1.3.6.1.4.1.2272.1.100.8.14.1.17
Number of Pages Dropped for p-bit 7
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosDECoding 1.3.6.1.4.1.2272.1.100.8.15
This indicates the DE Coding that should be used
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ad8p0d(1), ad7p1d(2), ad6p2d(3), m7p1d(4), m6p2d(5), m5p3d(6), dei(7)  

rc2kQosCombinePassDropQueueBW 1.3.6.1.4.1.2272.1.100.8.16
Combine Pass-Drop queue bandwidth
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rc2kQosSplitPassDropQueueBW 1.3.6.1.4.1.2272.1.100.8.17
Split Pass-Drop queue bandwidth
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rc2kQosEgressQosPCPTable 1.3.6.1.4.1.2272.1.100.8.18
This table is used to specify the Priority Code Point table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosEgressQosPCPEntry

rc2kQosEgressQosPCPEntry 1.3.6.1.4.1.2272.1.100.8.18.1
Entry containing information of PCP Table
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosEgressQosPCPEntry  

rc2kQosEgressQosPCPRow 1.3.6.1.4.1.2272.1.100.8.18.1.1
Used to uniquely identify a row in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..8  

rc2kQosEgressQosPCPLevel 1.3.6.1.4.1.2272.1.100.8.18.1.2
Qos level
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

rc2kQosEgressQosPCPInProfileIeee8021P 1.3.6.1.4.1.2272.1.100.8.18.1.3
In Profile 802.1P
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

rc2kQosEgressQosPCPOutOfProfileIeee8021P 1.3.6.1.4.1.2272.1.100.8.18.1.4
Out Of Profile 802.1P
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

rc2kQosUseCfiAsDei 1.3.6.1.4.1.2272.1.100.8.19
This indicates whether to use CFI bit (for non 88a8 packets) as DEI bit or not.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rc2kQosFOQDropTrapInterval 1.3.6.1.4.1.2272.1.100.8.20
The time interval indicating how often FOQ drop traps should be sent. An interval of 0 disables the traps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1440  

rc2kQosFabricDropTrapInterval 1.3.6.1.4.1.2272.1.100.8.21
The time interval indicating how often Fabric drop traps should be sent. An interval of 0 disables the traps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1440  

rc2kQosTotalDropReadings 1.3.6.1.4.1.2272.1.100.8.22
The total count of drop samples. This is used when sending FOQ/Fabric Drop Traps
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rc2kQosDropReadings 1.3.6.1.4.1.2272.1.100.8.23
The total number of drop samples within the drop trap time interval. This is used when sending FOQ/Fabric Drop Traps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rc2kQosFabricInterfaceStatsTable 1.3.6.1.4.1.2272.1.100.8.24
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Rc2kQosFabricInterfaceStatsEntry

rc2kQosFabricInterfaceStatsEntry 1.3.6.1.4.1.2272.1.100.8.24.1
A Fabric Interface Drop Statistics table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Rc2kQosFabricInterfaceStatsEntry  

rc2kQosFabricInterfaceStatsSlotNumber 1.3.6.1.4.1.2272.1.100.8.24.1.1
Slot Number
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..10  

rc2kQosFabricInterfaceStatsLaneNumber 1.3.6.1.4.1.2272.1.100.8.24.1.2
Lane number. 0 - Left, 1 - Middle, 2 - Right.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

rc2kQosFabricInterfaceStatsFOQDropEvents 1.3.6.1.4.1.2272.1.100.8.24.1.3
Count of FOQ drop events occurred in this drop-trap time period.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosFabricInterfaceStatsFOQTotalDropEvents 1.3.6.1.4.1.2272.1.100.8.24.1.4
Total count of FOQ drop events
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosFabricInterfaceStatsFabricDropEvents 1.3.6.1.4.1.2272.1.100.8.24.1.5
Count of Fabric drop events occurred in this drop-trap time period.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rc2kQosFabricInterfaceStatsFabricTotalDropEvents 1.3.6.1.4.1.2272.1.100.8.24.1.6
Total count of Fabric drop events
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor