RC-BRIDGE-MIB

File: RC-BRIDGE-MIB.mib (81439 bytes)

Imported modules

SNMPv2-SMI BRIDGE-MIB SNMPv2-TC
IF-MIB RAPID-CITY

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 TimeTicks BridgeId
Timeout TruthValue MacAddress
RowStatus InterfaceIndex rcBridge
rcStg PortSet IdList
EnableValue

Defined Types

RcStgEntry  
SEQUENCE    
  rcStgId Integer32
  rcStgTaggedBpduAddress MacAddress
  rcStgTaggedBpduVlanId Integer32
  rcStgBridgeAddress MacAddress
  rcStgNumPorts Integer32
  rcStgProtocolSpecification INTEGER
  rcStgPriority Integer32
  rcStgTimeSinceTopologyChange TimeTicks
  rcStgTopChanges Counter32
  rcStgDesignatedRoot BridgeId
  rcStgRootCost Integer32
  rcStgRootPort Integer32
  rcStgMaxAge Timeout
  rcStgHelloTime Timeout
  rcStgHoldTime Integer32
  rcStgForwardDelay Timeout
  rcStgBridgeMaxAge Timeout
  rcStgBridgeHelloTime Timeout
  rcStgBridgeForwardDelay Timeout
  rcStgEnableStp TruthValue
  rcStgStpTrapEnable TruthValue
  rcStgPortMembers OCTET STRING
  rcStgRowStatus RowStatus
  rcStgPortStpState OCTET STRING
  rcStgType INTEGER
  rcStgNtStgEnable TruthValue

RcStgPortEntry  
SEQUENCE    
  rcStgPort InterfaceIndex
  rcStgPortStgId INTEGER
  rcStgPortPriority INTEGER
  rcStgPortState INTEGER
  rcStgPortEnableStp TruthValue
  rcStgPortFastStart TruthValue
  rcStgPortPathCost INTEGER
  rcStgPortDesignatedRoot BridgeId
  rcStgPortDesignatedCost Integer32
  rcStgPortDesignatedBridge BridgeId
  rcStgPortDesignatedPort OCTET STRING
  rcStgPortForwardTransitions Counter32
  rcStgPortInConfigBpdus Counter32
  rcStgPortInTcnBpdus Counter32
  rcStgPortInBadBpdus Counter32
  rcStgPortOutConfigBpdus Counter32
  rcStgPortOutTcnBpdus Counter32
  rcStgPortRowStatus RowStatus
  rcStgPortChangeDetection TruthValue
  rcStgPortPathCost32 Integer32
  rcStgPortAdminPathCost INTEGER
  rcStgPortAdminPathCost32 Integer32

RcBridgeFdbEntry  
SEQUENCE    
  rcBridgeFdbStatus INTEGER
  rcBridgeFdbAddress MacAddress
  rcBridgeFdbPort InterfaceIndex
  rcBridgeFdbMonitor TruthValue
  rcBridgeFdbPriority INTEGER
  rcBridgeFdbQosLevel INTEGER
  rcBridgeFdbSmltRemote TruthValue
  rcBridgeFdbVlanId INTEGER

RcBridgeStaticEntry  
SEQUENCE    
  rcBridgeStaticAddress MacAddress
  rcBridgeStaticPort InterfaceIndex
  rcBridgeStaticMonitor TruthValue
  rcBridgeStaticPriority INTEGER
  rcBridgeStaticStatus INTEGER
  rcBridgeStaticQosLevel INTEGER
  rcBridgeStaticVlanId INTEGER

RcBridgeFilterEntry  
SEQUENCE    
  rcBridgeFilterAddress MacAddress
  rcBridgeFilterPort InterfaceIndex
  rcBridgeFilterNotAllowedFrom OCTET STRING
  rcBridgeFilterStatus INTEGER
  rcBridgeFilterVlanId INTEGER
  rcBridgeFilterPcap TruthValue
  rcBridgeFilterDestDiscard OCTET STRING
  rcBridgeFilterSrcDiscard OCTET STRING

RcBridgeUnknownMacDiscardEntry  
SEQUENCE    
  rcBridgeUnknownMacDiscardIfIndex InterfaceIndex
  rcBridgeUnknownMacDiscardAutoLearnEnable TruthValue
  rcBridgeUnknownMacDiscardAutoLearnMode INTEGER
  rcBridgeUnknownMacDiscardAutoLearnTableMode INTEGER
  rcBridgeUnknownMacDiscardLogViolations INTEGER
  rcBridgeUnknownMacDiscardSendTrap INTEGER
  rcBridgeUnknownMacDiscardDisablePort INTEGER
  rcBridgeUnknownMacDiscardDefaultAutoLearnMonitor INTEGER
  rcBridgeUnknownMacDiscardDefaultAutoLearnPriority INTEGER
  rcBridgeUnknownMacDiscardMacCountMax INTEGER
  rcBridgeUnknownMacDiscardMacCountCur INTEGER

RcBridgeManualEditEntry  
SEQUENCE    
  rcBridgeManualEditAddress MacAddress
  rcBridgeManualEditPorts PortSet
  rcBridgeManualEditMonitor TruthValue
  rcBridgeManualEditPriority INTEGER
  rcBridgeManualEditStatus INTEGER

RcBridgeAutoLearnEntry  
SEQUENCE    
  rcBridgeAutoLearnAddress MacAddress
  rcBridgeAutoLearnPort PortSet
  rcBridgeAutoLearnMonitor TruthValue
  rcBridgeAutoLearnPriority INTEGER
  rcBridgeAutoLearnAction INTEGER

RcBridgeStaticMulticastEntry  
SEQUENCE    
  rcBridgeStaticMulticastAddress MacAddress
  rcBridgeStaticMulticastForwardingPorts PortSet
  rcBridgeStaticMulticastMltIds IdList
  rcBridgeStaticMulticastRowStatus RowStatus
  rcBridgeStaticMulticastVlanId INTEGER
  rcBridgeStaticMulticastNumMltIds Integer32

RcRateLimitEntry  
SEQUENCE    
  rcRateLimitIfIndex InterfaceIndex
  rcRateLimitIfTrafficType INTEGER
  rcRateLimitIfAllowedRate INTEGER
  rcRateLimitIfEnable TruthValue
  rcRateLimitIfAllowedRatePps Integer32
  rcRateLimitIfAllowedRateKbps Integer32
  rcRateLimitEgressRateLimit Integer32
  rcRateLimitEgressRateLimitState EnableValue

RcBridgeStaticMcastEntry  
SEQUENCE    
  rcBridgeStaticMcastVlanId INTEGER
  rcBridgeStaticMcastAddress MacAddress
  rcBridgeStaticMcastForwardingPorts PortSet
  rcBridgeStaticMcastMltIds IdList
  rcBridgeStaticMcastNumMltIds Integer32
  rcBridgeStaticMcastRowStatus RowStatus

RcBridgePP8300FilterEntry  
SEQUENCE    
  rcBridgePP8300FilterAddress MacAddress
  rcBridgePP8300FilterVlanId INTEGER
  rcBridgePP8300FilterDropCommand INTEGER
  rcBridgePP8300FilterQosLevel INTEGER
  rcBridgePP8300FilterPort Integer32
  rcBridgePP8300FilterStatus INTEGER

RcBridgeFdbProtectEntry  
SEQUENCE    
  rcBridgeFdbProtectPortNum InterfaceIndex
  rcBridgeFdbProtectMaxMacCount INTEGER
  rcBridgeFdbProtectMinMacCount INTEGER
  rcBridgeFdbProtectEnable EnableValue
  rcBridgeFdbProtectCurrentMacCount Integer32
  rcBridgeFdbProtectMacLearning TruthValue
  rcBridgeFdbProtectViolationLogTrap EnableValue
  rcBridgeFdbProtectViolationDownPort EnableValue

RcBridgeNewFdbEntry  
SEQUENCE    
  rcBridgeNewFdbStatus INTEGER
  rcBridgeNewFdbAddress MacAddress
  rcBridgeNewFdbPort InterfaceIndex
  rcBridgeNewFdbMonitor TruthValue
  rcBridgeNewFdbQosLevel INTEGER
  rcBridgeNewFdbSmltRemote TruthValue
  rcBridgeNewFdbVlanId INTEGER

RcBridgeMmrpGrpFdbEntry  
SEQUENCE    
  rcBridgeMmrpGrpFdbVlanId Integer32
  rcBridgeMmrpGrpFdbAddr MacAddress
  rcBridgeMmrpGrpFdbPortList PortSet

Defined Values

rcBridgeMib 1.3.6.1.4.1.2272.1.14.0
Enterprise MIB for the Accelar product family.
MODULE-IDENTITY    

rcStgMaxStgs 1.3.6.1.4.1.2272.1.13.1
The maximum number of spanning tree groups this device can support concurrently.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcStgNumStgs 1.3.6.1.4.1.2272.1.13.2
The number of spanning tree groups that are currently defined.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcStgUnassignedPorts 1.3.6.1.4.1.2272.1.13.3
A bitfield used to identify which ports in the system currently not assigned to any STG. The bitfield is 32 octets long representing ports 0 to 255 (inclusive).
Status: current Access: read-only
OBJECT-TYPE    
  PortSet  

rcStgTable 1.3.6.1.4.1.2272.1.13.4
A table used to store Spanning Tree Group (STG) information. Each row in the table specifies a different STG in the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcStgEntry

rcStgEntry 1.3.6.1.4.1.2272.1.13.4.1
STG attributes
Status: current Access: not-accessible
OBJECT-TYPE    
  RcStgEntry  

rcStgId 1.3.6.1.4.1.2272.1.13.4.1.1
An identifier used to identify a STG in the device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

rcStgTaggedBpduAddress 1.3.6.1.4.1.2272.1.13.4.1.2
The MAC address to be assigned to the destination mac address field in tagged BPDUs. The default address is the well known multicast group address 01-80-c2-00-00-00.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

rcStgTaggedBpduVlanId 1.3.6.1.4.1.2272.1.13.4.1.3
The VLAN ID to be used for tagging BPDUs.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcStgBridgeAddress 1.3.6.1.4.1.2272.1.13.4.1.4
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with rcStgPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rcStgNumPorts 1.3.6.1.4.1.2272.1.13.4.1.5
The number of ports controlled by this bridging entity.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcStgProtocolSpecification 1.3.6.1.4.1.2272.1.13.4.1.6
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), decLb100(2), ieee8021d(3), pvst(4)  

rcStgPriority 1.3.6.1.4.1.2272.1.13.4.1.7
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of rcStgBridgeAddress.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

rcStgTimeSinceTopologyChange 1.3.6.1.4.1.2272.1.13.4.1.8
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

rcStgTopChanges 1.3.6.1.4.1.2272.1.13.4.1.9
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStgDesignatedRoot 1.3.6.1.4.1.2272.1.13.4.1.10
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

rcStgRootCost 1.3.6.1.4.1.2272.1.13.4.1.11
The cost of the path to the root as seen from this bridge.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcStgRootPort 1.3.6.1.4.1.2272.1.13.4.1.12
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcStgMaxAge 1.3.6.1.4.1.2272.1.13.4.1.13
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: current Access: read-only
OBJECT-TYPE    
  Timeout  

rcStgHelloTime 1.3.6.1.4.1.2272.1.13.4.1.14
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: current Access: read-only
OBJECT-TYPE    
  Timeout  

rcStgHoldTime 1.3.6.1.4.1.2272.1.13.4.1.15
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcStgForwardDelay 1.3.6.1.4.1.2272.1.13.4.1.16
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to rcStgBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
Status: current Access: read-only
OBJECT-TYPE    
  Timeout  

rcStgBridgeMaxAge 1.3.6.1.4.1.2272.1.13.4.1.17
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of rcStgBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 600..4000  

rcStgBridgeHelloTime 1.3.6.1.4.1.2272.1.13.4.1.18
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 100..1000  

rcStgBridgeForwardDelay 1.3.6.1.4.1.2272.1.13.4.1.19
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of rcStgBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 400..3000  

rcStgEnableStp 1.3.6.1.4.1.2272.1.13.4.1.20
Indicate whether the spanning tree protocol should be active in this STG.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcStgStpTrapEnable 1.3.6.1.4.1.2272.1.13.4.1.21
Indicate whether traps relating to the spanning tree protocol should be sent for this STG.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcStgPortMembers 1.3.6.1.4.1.2272.1.13.4.1.22
A bitfield used to identify which ports in the system are members this STG. The bitfield is 32 octets long representing ports 0 to 255 (inclusive).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..88)  

rcStgRowStatus 1.3.6.1.4.1.2272.1.13.4.1.23
Row status.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcStgPortStpState 1.3.6.1.4.1.2272.1.13.4.1.24
Every 2 bitfields used to identify a port state in this STG. Port state is cataloged as non-stp(0), blocking(1), learning(2), and forwarding(3).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(176)  

rcStgType 1.3.6.1.4.1.2272.1.13.4.1.25
Type of Stg.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), svlan(2), pbt(3), plsb(6)  

rcStgNtStgEnable 1.3.6.1.4.1.2272.1.13.4.1.26
Indicates whether this STG is Operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcStgPortTable 1.3.6.1.4.1.2272.1.13.5
A table used to store Spanning Tree Group (STG) port related information. If a port is associated with more than one STGs, the port will have one entry in this table for each STG it assigned to.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcStgPortEntry

rcStgPortEntry 1.3.6.1.4.1.2272.1.13.5.1
STG Port attributes
Status: current Access: not-accessible
OBJECT-TYPE    
  RcStgPortEntry  

rcStgPort 1.3.6.1.4.1.2272.1.13.5.1.1
The port number of the port for which this entry contains Spanning Tree Protocol management information.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcStgPortStgId 1.3.6.1.4.1.2272.1.13.5.1.2
The STG identifier this port is assigned to.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..128  

rcStgPortPriority 1.3.6.1.4.1.2272.1.13.5.1.3
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of rcStgPort.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

rcStgPortState 1.3.6.1.4.1.2272.1.13.5.1.4
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see rcStgPortEnable), this object will have a value of disabled(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

rcStgPortEnableStp 1.3.6.1.4.1.2272.1.13.5.1.5
The enabled/disabled status of the port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcStgPortFastStart 1.3.6.1.4.1.2272.1.13.5.1.6
When this flag is set, the port is moved straight to the forwarding(5) state upon being enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcStgPortPathCost 1.3.6.1.4.1.2272.1.13.5.1.7
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

rcStgPortDesignatedRoot 1.3.6.1.4.1.2272.1.13.5.1.8
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

rcStgPortDesignatedCost 1.3.6.1.4.1.2272.1.13.5.1.9
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcStgPortDesignatedBridge 1.3.6.1.4.1.2272.1.13.5.1.10
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

rcStgPortDesignatedPort 1.3.6.1.4.1.2272.1.13.5.1.11
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

rcStgPortForwardTransitions 1.3.6.1.4.1.2272.1.13.5.1.12
The number of times this port has transitioned from the Learning state to the Forwarding state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStgPortInConfigBpdus 1.3.6.1.4.1.2272.1.13.5.1.13
The number of Config BPUDs received by this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStgPortInTcnBpdus 1.3.6.1.4.1.2272.1.13.5.1.14
The number of Topology Change Notification BPUDs received by this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStgPortInBadBpdus 1.3.6.1.4.1.2272.1.13.5.1.15
The number of Bad BPUDs received by this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStgPortOutConfigBpdus 1.3.6.1.4.1.2272.1.13.5.1.16
The number of Config BPUDs transmitted by this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStgPortOutTcnBpdus 1.3.6.1.4.1.2272.1.13.5.1.17
The number of Topology Change Notification BPUDs transmitted by this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rcStgPortRowStatus 1.3.6.1.4.1.2272.1.13.5.1.18
Row status.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcStgPortChangeDetection 1.3.6.1.4.1.2272.1.13.5.1.19
If disabled, topology change notifications are not sent for the port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcStgPortPathCost32 1.3.6.1.4.1.2272.1.13.5.1.20
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Replacement for deprecated object dot1dStpPortPathCost.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..200000000  

rcStgPortAdminPathCost 1.3.6.1.4.1.2272.1.13.5.1.21
The administrative value of rcStgPortPathCost. This is the value that has been configured by the user, or 0 if there is no user-configured value. Note that a Set request on rcStgPortPathCost will also modify the corresponding value of this object.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

rcStgPortAdminPathCost32 1.3.6.1.4.1.2272.1.13.5.1.22
The administrative value of rcStgPortPathCost32. This is the value that has been configured by the user, or 0 if there is no user-configured value. Note that a Set request on rcStgPortPathCost32 will also modify the corresponding value of this object.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..200000000  

rcStgNotAllowedPorts 1.3.6.1.4.1.2272.1.13.6
A bitfield used to identify which ports in the system that cannot be assigned to any STG (i.e., which ports are single routable ports). The bitfield is 32 octets long representing ports 0 to 255 (inclusive).
Status: current Access: read-only
OBJECT-TYPE    
  PortSet  

rcBridgeFdbTable 1.3.6.1.4.1.2272.1.14.1
This table is an replacement to the standard dot1dTpFdbTable in rfc1493.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeFdbEntry

rcBridgeFdbEntry 1.3.6.1.4.1.2272.1.14.1.1
Information about a specific unicast MAC address for which the bridge has some forwarding information.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RcBridgeFdbEntry  

rcBridgeFdbStatus 1.3.6.1.4.1.2272.1.14.1.1.1
This object indicates the status of this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER other(1), invalid(2), learned(3), self(4), mgmt(5), discard(6)  

rcBridgeFdbAddress 1.3.6.1.4.1.2272.1.14.1.1.2
A unicast MAC address for which the bridge has forwarding and/or filtering information.
Status: deprecated Access: read-only
OBJECT-TYPE    
  MacAddress  

rcBridgeFdbPort 1.3.6.1.4.1.2272.1.14.1.1.3
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of rcBridgeFdbStatus is not learned(3).
Status: deprecated Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcBridgeFdbMonitor 1.3.6.1.4.1.2272.1.14.1.1.4
Used to indicate whether monitoring should be performed on this unicast MAC address. If monitoring is enabled, any packet received with a matching destination MAC address will be forwarded to the port configured to receive monitor traffic.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

rcBridgeFdbPriority 1.3.6.1.4.1.2272.1.14.1.1.5
Used to indicate the priority of the incoming frames with this destination Mac Address.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER low(0), high(1)  

rcBridgeFdbQosLevel 1.3.6.1.4.1.2272.1.14.1.1.6
Used to indicate the qos level of the incoming frames with this destination Mac Address.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)  

rcBridgeFdbSmltRemote 1.3.6.1.4.1.2272.1.14.1.1.7
A MAC address indicate for remote learnt, either local or remote.
Status: deprecated Access: read-only
OBJECT-TYPE    
  TruthValue  

rcBridgeFdbVlanId 1.3.6.1.4.1.2272.1.14.1.1.8
Tok_String
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

rcBridgeFdbTblSize 1.3.6.1.4.1.2272.1.14.2
Used to indicate the number of entries in the bridge forwarding database table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcBridgeStaticTable 1.3.6.1.4.1.2272.1.14.3
This table is a proprietary replacement to the standard dot1dStaticTable in rfc1493.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeStaticEntry

rcBridgeStaticEntry 1.3.6.1.4.1.2272.1.14.3.1
A table containing forwarding information about unicast entries configured into the bridge by management. This information is used by the transparent bridging function in determining how to propagate a received frame.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcBridgeStaticEntry  

rcBridgeStaticAddress 1.3.6.1.4.1.2272.1.14.3.1.1
The MAC address of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rcBridgeStaticPort 1.3.6.1.4.1.2272.1.14.3.1.2
Port on which the MAC address is found.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcBridgeStaticMonitor 1.3.6.1.4.1.2272.1.14.3.1.3
Used to indicate whether monitoring should be performed on incoming packets that match this entry.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcBridgeStaticPriority 1.3.6.1.4.1.2272.1.14.3.1.4
Used to indicate forwarding priority of incoming packets that match this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER low(0), high(1)  

rcBridgeStaticStatus 1.3.6.1.4.1.2272.1.14.3.1.5
This object indicates the status of this entry. The default value is permanent(3).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5)  

rcBridgeStaticQosLevel 1.3.6.1.4.1.2272.1.14.3.1.6
Used to indicate the qos level.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)  

rcBridgeStaticVlanId 1.3.6.1.4.1.2272.1.14.3.1.7
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

rcBridgeStaticTblSize 1.3.6.1.4.1.2272.1.14.4
Used to indicate the number of entries in the bridge static table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcBridgeFilterTable 1.3.6.1.4.1.2272.1.14.5
This table is a proprietary replacement to the standard dot1dStaticTable (Filtering information) in rfc1493.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeFilterEntry

rcBridgeFilterEntry 1.3.6.1.4.1.2272.1.14.5.1
A table containing filtering information configured into the bridge by management specifying a dest- ination address on a specific port and a set of incoming ports. Frames received from one of the incoming ports and containing the specific destination addresses are not allowed to be forwarded.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcBridgeFilterEntry  

rcBridgeFilterAddress 1.3.6.1.4.1.2272.1.14.5.1.1
The MAC address of this entry. This address is used to match the destination address of incoming packets.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rcBridgeFilterPort 1.3.6.1.4.1.2272.1.14.5.1.2
Port on which this MAC address is found.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcBridgeFilterNotAllowedFrom 1.3.6.1.4.1.2272.1.14.5.1.3
Used to indicate a set of ports. Traffic arriving on any of the specified ports is not forwarded to this MAC address.
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(88)  

rcBridgeFilterStatus 1.3.6.1.4.1.2272.1.14.5.1.4
This object indicates the status of this entry. The default value is permanent(3).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5)  

rcBridgeFilterVlanId 1.3.6.1.4.1.2272.1.14.5.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

rcBridgeFilterPcap 1.3.6.1.4.1.2272.1.14.5.1.6
To enable pcap for the fdb-filter
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcBridgeFilterDestDiscard 1.3.6.1.4.1.2272.1.14.5.1.7
Used to indicate a set of ports. Traffic arriving on any of the specified ports from this MAC address.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(88)  

rcBridgeFilterSrcDiscard 1.3.6.1.4.1.2272.1.14.5.1.8
Used to indicate a set of ports. Traffic arriving on any of the specified ports is not forwarded to this MAC address.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(88)  

rcBridgeFilterTblSize 1.3.6.1.4.1.2272.1.14.6
Used to indicate the number of entries in the bridge filter table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcBridgeUnknownMacDiscardTable 1.3.6.1.4.1.2272.1.14.7
This table is used to configure the 'unknown mac discard' feature. This feature applies to layer 2 and layer 3 packets coming from or going out to a specific physical port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeUnknownMacDiscardEntry

rcBridgeUnknownMacDiscardEntry 1.3.6.1.4.1.2272.1.14.7.1
A table containing information configuring the 'unknown mac discard' feature.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcBridgeUnknownMacDiscardEntry  

rcBridgeUnknownMacDiscardIfIndex 1.3.6.1.4.1.2272.1.14.7.1.1
Port on which this 'unknown mac discard' configuration applied to.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcBridgeUnknownMacDiscardAutoLearnEnable 1.3.6.1.4.1.2272.1.14.7.1.2
This variable is used to enable/disable the auto-learn capability of a specific port. The default value is auto-learn disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcBridgeUnknownMacDiscardAutoLearnMode 1.3.6.1.4.1.2272.1.14.7.1.3
This variable is used to control the auot-learn mode to either one-shot or continuous. In one-shot mode, the first n MAC addresses will be learned. The number n is dependents on the system's available resource. In continuous mode, MAC address is continuous learned until the resource limit is reached. After that the subsequent MAC will be disallowed until one of the original learned MAC is aged out. The default value is one-shot mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oneShot(1), continuous(2)  

rcBridgeUnknownMacDiscardAutoLearnTableMode 1.3.6.1.4.1.2272.1.14.7.1.4
This MIB variable is used to lock or unlock the auto-learn MAC table. When the auto-learn table is lock neither new MAC will be learned nor the original learned MAC will be aged out. User needs to lock the auto-learn table before MAC addresses can be save to the NVRAM. The whole auto-learn table will be flushed when the setting change from lock to unlock mode. The default value is unlock mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unlock(1), lock(2)  

rcBridgeUnknownMacDiscardLogViolations 1.3.6.1.4.1.2272.1.14.7.1.5
This variable controls the logging action that the system will take when a MAC address violation event was detected. The value 'enable' means a log record will be written to the system log file when a violation event was detected. The default value is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcBridgeUnknownMacDiscardSendTrap 1.3.6.1.4.1.2272.1.14.7.1.6
This variable controls the send trap action that system will take when a MAC address violation event was detected. The value 'enable' means a SNMP trap packet will be send to the management station when a violation event was detected. The default value is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcBridgeUnknownMacDiscardDisablePort 1.3.6.1.4.1.2272.1.14.7.1.7
This variable controls the 'disable-port' action that system will take when a MAC address violation event was detected. The value 'enable' means the specific port will be disabled when the violation event was detected. It needs user manually to bring the port back once it was disabled. The default value is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

rcBridgeUnknownMacDiscardDefaultAutoLearnMonitor 1.3.6.1.4.1.2272.1.14.7.1.8
This variable controls the default monitor setting of an auto-learn MAC address. The value 'monitor' means a copy of packet that send from or to the auto-learned MAC address will be forwarded to the designated monitoring port on the system. The default value is none.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER none(1), monitor(2)  

rcBridgeUnknownMacDiscardDefaultAutoLearnPriority 1.3.6.1.4.1.2272.1.14.7.1.9
This variable controls the default priority setting of an auto-learn MAC address. The value 'low' means packets send from the MAC address is forwarded at low priority. The value 'high' means packets send from the MAC address is forwarded at high priority. The default value is low.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER low(1), high(2)  

rcBridgeUnknownMacDiscardMacCountMax 1.3.6.1.4.1.2272.1.14.7.1.10
This variable represents the maxium number of MACc that can be added to some port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2048  

rcBridgeUnknownMacDiscardMacCountCur 1.3.6.1.4.1.2272.1.14.7.1.11
This variable represents the current number of MACs that have been added to some port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2048  

rcBridgeManualEditTable 1.3.6.1.4.1.2272.1.14.8
This table is used to specify what MAC addresses can be learned on each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeManualEditEntry

rcBridgeManualEditEntry 1.3.6.1.4.1.2272.1.14.8.1
A table containing information of MAC addresses that can be learned.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcBridgeManualEditEntry  

rcBridgeManualEditAddress 1.3.6.1.4.1.2272.1.14.8.1.1
This variable contains the source MAC address of an entry.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rcBridgeManualEditPorts 1.3.6.1.4.1.2272.1.14.8.1.2
This variable contains the allowed ports on which the MAC address of this entry can be learned.
Status: current Access: read-write
OBJECT-TYPE    
  PortSet  

rcBridgeManualEditMonitor 1.3.6.1.4.1.2272.1.14.8.1.3
This variable specifies the monitoring setting of the MAC address. The value 'true' means a copy of packet frame that send from or to the MAC address is forwarded to the designated monitoring port on the system. The default value is false.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcBridgeManualEditPriority 1.3.6.1.4.1.2272.1.14.8.1.4
This variable specifies the priority setting of the MAC address. The value 'low' means packet frames send from the MAC address is forwarded at low priority. The default value is low.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER low(1), high(2)  

rcBridgeManualEditStatus 1.3.6.1.4.1.2272.1.14.8.1.5
The variable controls the status of a MAC address in the table. The value 'active' is used to add the MAC address entry into the table. The value 'invalid' is used to delete the MAC address from the table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), active(3)  

rcBridgeManualEditTblSize 1.3.6.1.4.1.2272.1.14.9
Used to indicate the number of entries in the manual edit table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcBridgeAutoLearnTable 1.3.6.1.4.1.2272.1.14.10
This table contains information of auto-learned MAC address when the 'unknow MAC discard' table's auto-learn is enabled. User must explicitly lock and save the table into NVRAM in order to have this table has the same configuration cross the system reset.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeAutoLearnEntry

rcBridgeAutoLearnEntry 1.3.6.1.4.1.2272.1.14.10.1
Entries in this table are created automatically when the user explicitly does a lock operation on the auto-learn-table (i.e., when 'AutoLearnTableMode' is set to lock(2)).
Status: current Access: not-accessible
OBJECT-TYPE    
  RcBridgeAutoLearnEntry  

rcBridgeAutoLearnAddress 1.3.6.1.4.1.2272.1.14.10.1.1
This variable contains the source MAC address of the entries.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rcBridgeAutoLearnPort 1.3.6.1.4.1.2272.1.14.10.1.2
This variable contains the port where the MAC address was learned.
Status: current Access: read-only
OBJECT-TYPE    
  PortSet  

rcBridgeAutoLearnMonitor 1.3.6.1.4.1.2272.1.14.10.1.3
This variable contains the monitor setting of the MAC address. The value 'true' means a copy of packet frame that send from or to the MAC address is forwarded to the designated monitoring port on the system. This value should be synchronized with the setting of 'unknow MAC discard' table's 'Default AutoLearnMonitor' setting when the MAC address was learned.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcBridgeAutoLearnPriority 1.3.6.1.4.1.2272.1.14.10.1.4
This variable contains the priority setting of the MAC address. The value 'low' means packet frames send from the MAC address is forwarded at low priority. The value 'high' means packet frames send from the MAC address is forwarded at high priority. This value should be synchronized with the setting of 'unknow MAC discard' table's 'DefaultAutoLearnPriority' setting when the MAC address was learned.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER low(1), high(2)  

rcBridgeAutoLearnAction 1.3.6.1.4.1.2272.1.14.10.1.5
This variable is for converting an auto-learned MAC address entry to a manual edit MAC address entry. This variable provides a mechanism for user to move a MAC address entry from auto-learn table to manual edit table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), convertToManualEdit(1)  

rcBridgeAutoLearnTblSize 1.3.6.1.4.1.2272.1.14.11
Used to indicate the number of entries in the auto learn table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcBridgeStaticMulticastTable 1.3.6.1.4.1.2272.1.14.12
Tok_String
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeStaticMulticastEntry

rcBridgeStaticMulticastEntry 1.3.6.1.4.1.2272.1.14.12.1
Tok_String
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RcBridgeStaticMulticastEntry  

rcBridgeStaticMulticastAddress 1.3.6.1.4.1.2272.1.14.12.1.1
src mac addr.
Status: deprecated Access: read-only
OBJECT-TYPE    
  MacAddress  

rcBridgeStaticMulticastForwardingPorts 1.3.6.1.4.1.2272.1.14.12.1.2
ports for forward this mac
Status: deprecated Access: read-write
OBJECT-TYPE    
  PortSet  

rcBridgeStaticMulticastMltIds 1.3.6.1.4.1.2272.1.14.12.1.3
list of mlts this mac will be forwarded on
Status: deprecated Access: read-write
OBJECT-TYPE    
  IdList  

rcBridgeStaticMulticastRowStatus 1.3.6.1.4.1.2272.1.14.12.1.4
row status
Status: deprecated Access: read-write
OBJECT-TYPE    
  RowStatus  

rcBridgeStaticMulticastVlanId 1.3.6.1.4.1.2272.1.14.12.1.5
Vlan Id
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..4095  

rcBridgeStaticMulticastNumMltIds 1.3.6.1.4.1.2272.1.14.12.1.6
number of mlts Ids
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcBridgeStaticMulticastTblSize 1.3.6.1.4.1.2272.1.14.13
Used to indicate the number of entries in the static multicast table.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

rcRateLimitTable 1.3.6.1.4.1.2272.1.14.14
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcRateLimitEntry

rcRateLimitEntry 1.3.6.1.4.1.2272.1.14.14.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  RcRateLimitEntry  

rcRateLimitIfIndex 1.3.6.1.4.1.2272.1.14.14.1.1
Port ifindex.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcRateLimitIfTrafficType 1.3.6.1.4.1.2272.1.14.14.1.2
Type of traffic allowed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER multicast(1), broadcast(2), broadcast-multicast(3)  

rcRateLimitIfAllowedRate 1.3.6.1.4.1.2272.1.14.14.1.3
Allowed traffic rate. If chassis type is 8100. Also used by BayStack to indicate rate limit percent. For BayStack, a value of 0 indicates no limit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..25  

rcRateLimitIfEnable 1.3.6.1.4.1.2272.1.14.14.1.4
Turn on/off rate limiting on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcRateLimitIfAllowedRatePps 1.3.6.1.4.1.2272.1.14.14.1.5
Allowed traffic rate packets per second. If chassis type is 8600.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcRateLimitIfAllowedRateKbps 1.3.6.1.4.1.2272.1.14.14.1.6
Allowed traffic rate Kbits per second. If chassis type is R-module.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 250..2147483647  

rcRateLimitEgressRateLimit 1.3.6.1.4.1.2272.1.14.14.1.7
Egress Rate Limit.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcRateLimitEgressRateLimitState 1.3.6.1.4.1.2272.1.14.14.1.8
Used to enable/disable shape/egress-rate-limit functionality.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcBridgeStaticMcastTable 1.3.6.1.4.1.2272.1.14.15
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeStaticMcastEntry

rcBridgeStaticMcastEntry 1.3.6.1.4.1.2272.1.14.15.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  RcBridgeStaticMcastEntry  

rcBridgeStaticMcastVlanId 1.3.6.1.4.1.2272.1.14.15.1.1
Vlan Id
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4095  

rcBridgeStaticMcastAddress 1.3.6.1.4.1.2272.1.14.15.1.2
src mac addr.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rcBridgeStaticMcastForwardingPorts 1.3.6.1.4.1.2272.1.14.15.1.3
ports for forward this mac
Status: current Access: read-write
OBJECT-TYPE    
  PortSet  

rcBridgeStaticMcastMltIds 1.3.6.1.4.1.2272.1.14.15.1.4
list of mlts this mac will be forwarded on
Status: current Access: read-write
OBJECT-TYPE    
  IdList  

rcBridgeStaticMcastNumMltIds 1.3.6.1.4.1.2272.1.14.15.1.5
number of mlts Ids
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcBridgeStaticMcastRowStatus 1.3.6.1.4.1.2272.1.14.15.1.6
row status
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rcBridgePP8300FilterTable 1.3.6.1.4.1.2272.1.14.16
This table is a proprietary replacement to the standard dot1dStaticTable (Filtering information) in rfc1493. This table is specific for PP8300.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgePP8300FilterEntry

rcBridgePP8300FilterEntry 1.3.6.1.4.1.2272.1.14.16.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  RcBridgePP8300FilterEntry  

rcBridgePP8300FilterAddress 1.3.6.1.4.1.2272.1.14.16.1.1
The MAC address of this entry. This address is used to match the destination address of incoming packets.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rcBridgePP8300FilterVlanId 1.3.6.1.4.1.2272.1.14.16.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

rcBridgePP8300FilterDropCommand 1.3.6.1.4.1.2272.1.14.16.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), srcDrop(2), dstDrop(3), bothDrop(4)  

rcBridgePP8300FilterQosLevel 1.3.6.1.4.1.2272.1.14.16.1.4
Used to indicate the qos level.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)  

rcBridgePP8300FilterPort 1.3.6.1.4.1.2272.1.14.16.1.5
Mac filter needs the device Id and port Id programmed properly to make the SA drop working properly
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rcBridgePP8300FilterStatus 1.3.6.1.4.1.2272.1.14.16.1.6
This object indicates the status of this entry. The default value is permanent(3).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5)  

rcBridgeFdbProtectTable 1.3.6.1.4.1.2272.1.14.17
This table gives information about the mac learning limits on a particular port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeFdbProtectEntry

rcBridgeFdbProtectEntry 1.3.6.1.4.1.2272.1.14.17.1
Information about a specific MAC address learning limits of a specific port.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcBridgeFdbProtectEntry  

rcBridgeFdbProtectPortNum 1.3.6.1.4.1.2272.1.14.17.1.1
This object is the interface on which MAC address learning limit is applied.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcBridgeFdbProtectMaxMacCount 1.3.6.1.4.1.2272.1.14.17.1.2
Used to indicate maximum number of MAC address that can be learnt on the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000000  

rcBridgeFdbProtectMinMacCount 1.3.6.1.4.1.2272.1.14.17.1.3
Used to indicate minimum number of MAC address learnt which mac address learning will be re-enabled on the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000000  

rcBridgeFdbProtectEnable 1.3.6.1.4.1.2272.1.14.17.1.4
Used to enable or disable MAC learning limit feature on the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcBridgeFdbProtectCurrentMacCount 1.3.6.1.4.1.2272.1.14.17.1.5
This object indicates the current number of MAC address learnt on the port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rcBridgeFdbProtectMacLearning 1.3.6.1.4.1.2272.1.14.17.1.6
This object indicates whether the port can currrently learn new MAC addresses or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcBridgeFdbProtectViolationLogTrap 1.3.6.1.4.1.2272.1.14.17.1.7
Used to enable or disable logging and sending of snmp trap, once MAC learning limit is reached for the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcBridgeFdbProtectViolationDownPort 1.3.6.1.4.1.2272.1.14.17.1.8
Used to enable or disable the action of disabling the port, once MAC learning limit is reached for the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnableValue  

rcBridgeNewFdbTable 1.3.6.1.4.1.2272.1.14.18
This table is an replacement to the standard dot1dTpFdbTable in rfc1493.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeNewFdbEntry

rcBridgeNewFdbEntry 1.3.6.1.4.1.2272.1.14.18.1
Information about a specific unicast MAC address for which the bridge has some forwarding information.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcBridgeNewFdbEntry  

rcBridgeNewFdbStatus 1.3.6.1.4.1.2272.1.14.18.1.1
This object indicates the status of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), invalid(2), learned(3), self(4), mgmt(5), discard(6)  

rcBridgeNewFdbAddress 1.3.6.1.4.1.2272.1.14.18.1.2
A unicast MAC address for which the bridge has forwarding and/or filtering information.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rcBridgeNewFdbPort 1.3.6.1.4.1.2272.1.14.18.1.3
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeNewFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of rcBridgeNewFdbStatus is not learned(3).
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rcBridgeNewFdbMonitor 1.3.6.1.4.1.2272.1.14.18.1.4
Used to indicate whether monitoring should be performed on this unicast MAC address. If monitoring is enabled, any packet received with a matching destination MAC address will be forwarded to the port configured to receive monitor traffic.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rcBridgeNewFdbQosLevel 1.3.6.1.4.1.2272.1.14.18.1.5
Used to indicate the qos level of the incoming frames with this destination Mac Address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)  

rcBridgeNewFdbSmltRemote 1.3.6.1.4.1.2272.1.14.18.1.6
A MAC address indicate for remote learnt, either local or remote.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rcBridgeNewFdbVlanId 1.3.6.1.4.1.2272.1.14.18.1.7
Used to indicate the Vlan ID for this MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

rcBridgeMmrpGrpFdbTable 1.3.6.1.4.1.2272.1.14.19
This table is for multicast group fdb entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RcBridgeMmrpGrpFdbEntry

rcBridgeMmrpGrpFdbEntry 1.3.6.1.4.1.2272.1.14.19.1
Information about a specific multicast group MAC address for which the bridge has some forwarding information.
Status: current Access: not-accessible
OBJECT-TYPE    
  RcBridgeMmrpGrpFdbEntry  

rcBridgeMmrpGrpFdbVlanId 1.3.6.1.4.1.2272.1.14.19.1.1
Used to indicate the Vlan ID for this MAC address.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4094  

rcBridgeMmrpGrpFdbAddr 1.3.6.1.4.1.2272.1.14.19.1.2
A multicast group MAC address for which the bridge has forwarding and/or filtering information.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

rcBridgeMmrpGrpFdbPortList 1.3.6.1.4.1.2272.1.14.19.1.3
List of ports
Status: current Access: read-only
OBJECT-TYPE    
  PortSet