RC-PORT-MIB

Imported modules

SNMPv2-SMI	SNMPv2-TC	IF-MIB
RAPID-CITY

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Counter32	TruthValue	DisplayString
MacAddress	RowStatus	TimeInterval
InterfaceIndex	rcPort	rcChassis
rcTest	rcStat	PortSet
EnableValue

Defined Types

RcPortEntry
SEQUENCE
	rcPortIndex	InterfaceIndex
	rcPortType	INTEGER
	rcPortConnectorType	INTEGER
	rcPortPerformRouting	TruthValue
	rcPortHighPriority	TruthValue
	rcPortAction	INTEGER
	rcPortResult	INTEGER
	rcPortPrimaryConnector	INTEGER
	rcPortActiveConnector	INTEGER
	rcPortBackupConnectorStatus	INTEGER
	rcPortAutoNegotiate	TruthValue
	rcPortAdminDuplex	INTEGER
	rcPortOperDuplex	INTEGER
	rcPortAdminSpeed	INTEGER
	rcPortOperSpeed	Integer32
	rcPortMltId	Integer32
	rcPortLocked	TruthValue
	rcPortAutoNegotiationSupported	TruthValue
	rcPortSingleRoutablePort	TruthValue
	rcPortUnknownMacDiscard	TruthValue
	rcPortNumStateTransition	Counter32
	rcPortAllowOversizeFrame	TruthValue
	rcPortUserPriority	INTEGER
	rcPortQosLevel	INTEGER
	rcPortDiffServEnable	TruthValue
	rcPortDiffServType	INTEGER
	rcPortDiffServIeee8021POverrideEnable	TruthValue
	rcPortVendorDescr	DisplayString
	rcPortName	DisplayString
	rcPortOctapidId	Integer32
	rcPortWan	INTEGER
	rcPortTransport	INTEGER
	rcPortMultimediaFilterEnable	TruthValue
	rcPortMultimediaDevSelection	DisplayString
	rcPortServiceType	INTEGER
	rcPortMode	INTEGER
	rcPortAdminRouting	EnableValue
	rcPortOperRouting	EnableValue
	rcPortPid	Integer32
	rcPortIeee8021POverrideEnable	TruthValue
	rcPortShaperEnable	TruthValue
	rcPortShaperMaxRate	INTEGER
	rcPortShaperBurstSize	INTEGER
	rcPortCpLimitShutDown	TruthValue
	rcPortHighSecureEnable	TruthValue
	rcPortTlsPriorityOverride	EnableValue
	rcPortVctAbility	INTEGER
	rcPortVctAdminStatus	EnableValue
	rcPortMrouteStrLimit	INTEGER
	rcPortMrouteStrTimerCheck	INTEGER
	rcPortMrouteStrLimitEnable	TruthValue
	rcPortUpdateDynamicMacQosLevel	EnableValue
	rcPortVplsDualHoming	INTEGER
	rcPortVplsMgmtVlan	TruthValue
	rcPortTlsManagedBySp	TruthValue
	rcPortAutoNegAd	BITS
	rcPortAutoNegAdCapability	BITS
	rcPortAutoRecoverPort	TruthValue
	rcPortExtCplimitConf	INTEGER
	rcPortExtCplimitUtilRate	INTEGER
	rcPortEgressRateLimit	INTEGER
	rcPortEgressRateLimitState	EnableValue
	rcPortBpduFilteringTimerCount	TimeInterval
	rcPortBpduFilteringTimeout	TimeInterval
	rcPortBpduFilteringAdminEnabled	TruthValue
	rcPortBpduFilteringOperEnabled	TruthValue
	rcPortQinqEtherType	INTEGER
	rcPortTrustDscp	TruthValue
	rcPortCpLimitEnable	EnableValue
	rcPortCpMulticastLimit	INTEGER
	rcPortCpBroadcastLimit	INTEGER
	rcPortSmartAutoNegotiate	TruthValue

RcPortPcapEntry
SEQUENCE
	rcPortPcapIndex	InterfaceIndex
	rcPortPcapEnable	TruthValue
	rcPortPcapMode	INTEGER
	rcPortPcapFilterListSize	INTEGER
	rcPortPcapFilterList	OCTET STRING

RcPortPoePseIndexEntry
SEQUENCE
	rcPortPoePseIndexIfIndex	InterfaceIndex
	rcPortPoePseIndexGroupIndex	INTEGER
	rcPortPoePseIndexPortIndex	INTEGER

RcPortPoeMainPseExtnEntry
SEQUENCE
	rcPortPoeMainPseExtnGroupIndex	INTEGER
	rcPortPoeMainPseExtnPwrAdmin	EnableValue
	rcPortPoeMainPseExtnPwrPriority	INTEGER
	rcPortPoeMainPseExtnDeviceDetectType	INTEGER
	rcPortPoeMainPseExtnPwrLimit	INTEGER

RcPortPoePsePortExtnEntry
SEQUENCE
	rcPortPoePsePortExtnGroupIndex	INTEGER
	rcPortPoePsePortExtnPortIndex	INTEGER
	rcPortPoePsePortExtnPwrLimit	INTEGER
	rcPortPoePsePortExtnMeasuredVolt	Integer32
	rcPortPoePsePortExtnMeasuredCurrent	Integer32
	rcPortPoePsePortExtnPwrConsumpt	Integer32

RcPortLacpEntry
SEQUENCE
	rcPortLacpAdminEnable	TruthValue
	rcPortLacpOperEnable	TruthValue
	rcPortLacpFastPeriodicTime	INTEGER
	rcPortLacpSlowPeriodicTime	INTEGER
	rcPortLacpTimeoutScale	INTEGER
	rcPortLacpAggrWaitTime	INTEGER
	rcPortLacpFastPeriodicTimeOper	INTEGER
	rcPortLacpSlowPeriodicTimeOper	INTEGER
	rcPortLacpTimeoutScaleOper	INTEGER
	rcPortLacpAggrWaitTimeOper	INTEGER

RcPortVLacpEntry
SEQUENCE
	rcPortVLacpAdminEnable	TruthValue
	rcPortVLacpOperEnable	TruthValue
	rcPortVLacpFastPeriodicTimer	INTEGER
	rcPortVLacpSlowPeriodicTimer	INTEGER
	rcPortVLacpTimeout	INTEGER
	rcPortVLacpTimeoutScale	INTEGER
	rcPortVLacpEtherType	Integer32
	rcPortVLacpEtherMacAddress	MacAddress
	rcPortVLacpPortState	INTEGER
	rcPortVLacpDualHomingEnable	TruthValue

RcPortRemoteMirroringEntry
SEQUENCE
	rcPortRemoteMirroringIndex	InterfaceIndex
	rcPortRemoteMirroringEnable	TruthValue
	rcPortRemoteMirroringMode	INTEGER
	rcPortRemoteMirroringSrcMac	MacAddress
	rcPortRemoteMirroringDstMac	MacAddress
	rcPortRemoteMirroringEtherType	INTEGER
	rcPortRemoteMirroringVlanIdListSize	INTEGER
	rcPortRemoteMirroringVlanIdList	OCTET STRING
	rcPortRemoteMirroringRowStatus	RowStatus

RcPortVlacpSessionEntry
SEQUENCE
	rcPortVlacpSessionIfIndex	Integer32
	rcPortVlacpSessionSesNumber	Integer32
	rcPortVlacpSessionSrcMacAddress	MacAddress
	rcPortVlacpSessionRxTimer	Integer32
	rcPortVlacpSessionValidbit	INTEGER
	rcPortVlacpSessionInPktCount	Integer32

RcPortMgmtLinkEntry
SEQUENCE
	rcPortMgmtLinkIndex	InterfaceIndex
	rcPortMgmtLinkDescr	DisplayString
	rcPortMgmtLinkOperStatus	INTEGER
	rcPortMgmtLinkAutoNegotiate	TruthValue
	rcPortMgmtLinkDuplex	INTEGER
	rcPortMgmtLinkSpeed	INTEGER

RcPortFlushFdbEntry
SEQUENCE
	rcPortFlushFdbAddress	DisplayString
	rcPortFlushFdbVlanId	Integer32

RcTestEntry
SEQUENCE
	rcTestExtIfIndex	InterfaceIndex
	rcTestExtPassCount	Integer32
	rcTestExtFailCount	Integer32

RcStatEntry
SEQUENCE
	rcStatPortIndex	InterfaceIndex
	rcStatFrameTooShorts	Counter32
	rcStatBridgeInUnicastFrames	Counter32
	rcStatBridgeInMulticastFrames	Counter32
	rcStatBridgeInBroadcastFrames	Counter32
	rcStatBridgeInDiscards	Counter32
	rcStatBridgeOutUnicastFrames	Counter32
	rcStatBridgeOutMulticastFrames	Counter32
	rcStatBridgeOutBroadcastFrames	Counter32
	rcStatRouteInUnicastFrames	Counter32
	rcStatRouteInMulticastFrames	Counter32
	rcStatRouteInDiscards	Counter32
	rcStatRouteOutUnicastFrames	Counter32
	rcStatRouteOutMulticastFrames	Counter32
	rcStatStgForwardTransitions	Counter32
	rcStatStgInConfigBpdus	Counter32
	rcStatStgInTcnBpdus	Counter32
	rcStatStgInBadBpdus	Counter32
	rcStatStgOutConfigBpdus	Counter32
	rcStatStgOutTcnBpdus	Counter32
	rcStatBridgeOutFrames	Counter32

Defined Values

rcPortMib		1.3.6.1.4.1.2272.1.4.10.0
Enterprise MIB for the Accelar product family.
MODULE-IDENTITY

rcPortTable		1.3.6.1.4.1.2272.1.4.10.1
Port table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcPortEntry

rcPortEntry		1.3.6.1.4.1.2272.1.4.10.1.1
Entry containing info. for a particular port
Status: current	Access: not-accessible
OBJECT-TYPE
	RcPortEntry

rcPortIndex		1.3.6.1.4.1.2272.1.4.10.1.1.1
An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

rcPortType		1.3.6.1.4.1.2272.1.4.10.1.1.2
Port type
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(0), rc100BaseTX(1), rc100BaseT2(2), rc100BaseF(3), rc1000BaseF(4), rc1000BaseDualF(5), rc10BaseF(6), rcPosMMF(7), rcPosSMF(8), rcAtm(9), rcGbicLx(10), rcGbicSx(11), rcGbicXd(12), rcGbicCu(13), rcGbicOther(14), rcOc3cSM(15), rcOc3cMM(16), rcOc3cCOPPER(17), rcOc12cSM(18), rcOc12cMM(19), rcDs3(20), rcE3(21), rcGbicNone(22), rc1000BaseT(23), rcGbicZx(24), rcOc3cAtmSM(25), rcOc3cAtmMM(26), rcOc12cAtmSM(27), rcOc12cAtmMM(28), rcOc3cPosSM(29), rcOc3cPosMM(30), rcOc12cPosSM(31), rcOc12cPosMM(32), rcGbic1470(33), rcGbic1490(34), rcGbic1510(35), rcGbic1530(36), rcGbic1550(37), rcGbic1570(38), rcGbic1590(39), rcGbic1610(40), rcRmon(41), rcGbic1470APD(42), rcGbic1490APD(43), rcGbic1510APD(44), rcGbic1530APD(45), rcGbic1550APD(46), rcGbic1570APD(47), rcGbic1590APD(48), rcGbic1610APD(49), rc10GbLW(50), rc10GbLR(51), rcLogicalServerPort(52), rc1000BaseTX(53), rc100BaseTXPOE(54), rcGbicBx(55), rc10GbNone(56), rc1000XFP(57), rc10GbSR(58), rc10GbSW(59), rc10GbER(60), rc10GbEW(61), rc10GbOther(62), rc1000BaseTXPOE(63), rc10GbZR(64), rc10GbZW(65)

rcPortConnectorType		1.3.6.1.4.1.2272.1.4.10.1.1.3
Type of connector installed on this port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	nonRedundant(1), redundant(2)

rcPortPerformRouting		1.3.6.1.4.1.2272.1.4.10.1.1.4
Indicate whether this port should perform routing
Status: deprecated	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortHighPriority		1.3.6.1.4.1.2272.1.4.10.1.1.5
Indicate whether this port should be treated with high priority
Status: deprecated	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortAction		1.3.6.1.4.1.2272.1.4.10.1.1.6
Port related actions.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), flushMacFdb(2), flushArp(3), flushIp(4), flushAll(5), triggerRipUpdate(6), clearLoopDetectAlarm(7)

rcPortResult		1.3.6.1.4.1.2272.1.4.10.1.1.7
Result from the last Vlan action.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), inProgress(2), success(3), fail(4)

rcPortPrimaryConnector		1.3.6.1.4.1.2272.1.4.10.1.1.8
For ports configured with redundant connectors, this value is used to indicate which connector should be used as the 'active' connector on this port the next time the port is placed into the ifAdminStatus=Up.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	left(1), right(2), other(3)

rcPortActiveConnector		1.3.6.1.4.1.2272.1.4.10.1.1.9
For ports configured with redundant connectors, this value is used to indicate which connector is currently the active one. Only one connector can be active an anytime.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	left(1), right(2), other(3)

rcPortBackupConnectorStatus		1.3.6.1.4.1.2272.1.4.10.1.1.10
Indicate the status of the link attached to the back-up (non-active) connector.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2), other(3)

rcPortAutoNegotiate		1.3.6.1.4.1.2272.1.4.10.1.1.11
Indicate whether this port enabled for auto negotiations or not.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortAdminDuplex		1.3.6.1.4.1.2272.1.4.10.1.1.12
Indicates the port duplex type
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	half(1), full(2)

rcPortOperDuplex		1.3.6.1.4.1.2272.1.4.10.1.1.13
Indicate this port's current duplex value.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	half(1), full(2)

rcPortAdminSpeed		1.3.6.1.4.1.2272.1.4.10.1.1.14
Indicate this port's speed.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), mbps10(1), mbps100(2), mbps1000(3), mbps10000(4)

rcPortOperSpeed		1.3.6.1.4.1.2272.1.4.10.1.1.15
Indicate this port's current speed value.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPortMltId		1.3.6.1.4.1.2272.1.4.10.1.1.16
Indicate which multi-link trunk (MLT) this port is assigned to. If this port is not associated with any MLT, this value will be set to zero(0).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPortLocked		1.3.6.1.4.1.2272.1.4.10.1.1.17
Indicate whether this port is locked.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

rcPortAutoNegotiationSupported		1.3.6.1.4.1.2272.1.4.10.1.1.18
Indicate whether this port can support auto-negotiation.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

rcPortSingleRoutablePort		1.3.6.1.4.1.2272.1.4.10.1.1.19
Indicate whether this port is a single routable port. If this value is true, the port functions like a traditional router port.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

rcPortUnknownMacDiscard		1.3.6.1.4.1.2272.1.4.10.1.1.20
If rcUnknownMacDiscard is set to True, then a packet with an unknown source MAC address is dropped on that port, and other ports then will discard any packets with this MAC address in the destination field. For example, suppose 11:22:33:44:55:66 is an unknown source MAC, packets with source MAC 11:22:33:44:55 coming from this port is discarded, further more, packets with destination MAC 11:22:33:44:55:66 coming from other ports are also discarded, unless this address is later learned on another port or the restriction ages out.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortNumStateTransition		1.3.6.1.4.1.2272.1.4.10.1.1.21
# state transitions.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcPortUserPriority		1.3.6.1.4.1.2272.1.4.10.1.1.22
User priority level.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)

rcPortAllowOversizeFrame		1.3.6.1.4.1.2272.1.4.10.1.1.23
Used to specify whether over-size frames should be processed or dropped.
Status: deprecated	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortQosLevel		1.3.6.1.4.1.2272.1.4.10.1.1.30
Used to specify the Qos level packets, carried on this port, should be processed with.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)

rcPortDiffServEnable		1.3.6.1.4.1.2272.1.4.10.1.1.31
Used to enable/disable the Differentiated Service feature on this port.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortDiffServType		1.3.6.1.4.1.2272.1.4.10.1.1.32
Used to specify the Differentiated Service type for this port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), access(1), core(2)

rcPortDiffServIeee8021POverrideEnable		1.3.6.1.4.1.2272.1.4.10.1.1.33
Used to enable/disable the Differentiated Service IEEE 802.1P over-ride feature.
Status: deprecated	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortVendorDescr		1.3.6.1.4.1.2272.1.4.10.1.1.34
Used to show the name of the vendor of this port's connector. Only applicable to ports on a GBIC cards.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(16)

rcPortName		1.3.6.1.4.1.2272.1.4.10.1.1.35
This port's name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..255)

rcPortOctapidId		1.3.6.1.4.1.2272.1.4.10.1.1.36
The octapid id of the mirrored port.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Integer32

rcPortWan		1.3.6.1.4.1.2272.1.4.10.1.1.37
Indicatie this port's current WAN/LAN mode. Valid for 10 GE only
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), wan(1), lan(2)

rcPortTransport		1.3.6.1.4.1.2272.1.4.10.1.1.38
Indicatie this port's current tranport layer. Valid for 10 GE only
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), sonet(1), sdh(2)

rcPortMultimediaFilterEnable		1.3.6.1.4.1.2272.1.4.10.1.1.39
Used to enable/disable the Telephony device selected on this port
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortMultimediaDevSelection		1.3.6.1.4.1.2272.1.4.10.1.1.40
Used to set/get the selected Multimedia & Telephony Devices on this port. The String is the name of the device in the rcIpFilterMediaDevTable
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

rcPortServiceType		1.3.6.1.4.1.2272.1.4.10.1.1.41
Indicates the port functionality. 12uni is used to configure the port to be part of Martini service, tls is used to configure the port to be part of Any2Any VPN service and ip is used to perform the IP routing and mpls if enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), l2uni(1), vpls(2), ip(3), serverl2uni(4)

rcPortMode		1.3.6.1.4.1.2272.1.4.10.1.1.42
The port mode for l2uni service type.If the port is configured for l2uni service type, then the mode can be transparent or switched.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), transparent(1), switched(2)

rcPortAdminRouting		1.3.6.1.4.1.2272.1.4.10.1.1.43
Indicate whether the port is routable.
Status: current	Access: read-write
OBJECT-TYPE
	EnableValue

rcPortOperRouting		1.3.6.1.4.1.2272.1.4.10.1.1.44
The status of the port whether is routable.
Status: current	Access: read-only
OBJECT-TYPE
	EnableValue

rcPortPid		1.3.6.1.4.1.2272.1.4.10.1.1.45
The pid of the mirrored port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPortIeee8021POverrideEnable		1.3.6.1.4.1.2272.1.4.10.1.1.46
Used to enable/disable IEEE 802.1P override. If it is enabled, 802.1p vlaue from a tagged frame may not honor.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortShaperEnable		1.3.6.1.4.1.2272.1.4.10.1.1.47
Used to enable/disable shaper on the port.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortShaperMaxRate		1.3.6.1.4.1.2272.1.4.10.1.1.48
Shaping rate in mega bits per second. Note that actual shaping rate might be different from the configured rate due to the rate granularity of the shaper.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..10000

rcPortShaperBurstSize		1.3.6.1.4.1.2272.1.4.10.1.1.49
Burst size in kilo bytes per second. Note that actual burst size might be different from the configured size due to the granularity of the shaper.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	4..16000

rcPortCpLimitShutDown		1.3.6.1.4.1.2272.1.4.10.1.1.50
A TRUE value indicates if CP Limit shut down the interface.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

rcPortHighSecureEnable		1.3.6.1.4.1.2272.1.4.10.1.1.51
Enable/Disable high secure.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortTlsPriorityOverride		1.3.6.1.4.1.2272.1.4.10.1.1.52
Enable/Disable tls port priority override feature.
Status: current	Access: read-write
OBJECT-TYPE
	EnableValue

rcPortVctAbility		1.3.6.1.4.1.2272.1.4.10.1.1.53
If this object is TRUE, then the specified port is hardware-capable of doing the VCT test, if the rcPortAdminStatus is also true. If this object is FALSE, then the hardware cannot do the VCT test regardless of the setting of the rcPortAdminStatus.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	vctNotCapable(1), vctCapable(2)

rcPortVctAdminStatus		1.3.6.1.4.1.2272.1.4.10.1.1.54
Admin status for port VCT test. If this object is set to TRUE, then the VCT test can be performed. If it is set to FALSE, then the test cannot be performed, even if the port hardware is capable of doing it. If this variable si read, then the value returned is what was previously written.
Status: current	Access: read-write
OBJECT-TYPE
	EnableValue

rcPortMrouteStrLimit		1.3.6.1.4.1.2272.1.4.10.1.1.55
maximum number of multicast streams that are allowed to ingress to CPU through this port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..32768

rcPortMrouteStrTimerCheck		1.3.6.1.4.1.2272.1.4.10.1.1.56
sampling period to check number of multicast streams that has ingressed CPU through this port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..3600

rcPortMrouteStrLimitEnable		1.3.6.1.4.1.2272.1.4.10.1.1.57
enable or disable mroute stream limit on port.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortUpdateDynamicMacQosLevel		1.3.6.1.4.1.2272.1.4.10.1.1.58
It is used to indicate whether to update qos level for dynamic learned mac add resses associated with a port-based vlan when port qos level changes. If it is set to TRUE, qos level for all dynamic learned mac addresses will be changed upon changing port qos level. If it is set to DISABLE, once a mac address is learned, qos level will not updated when port qos level changes.
Status: current	Access: read-write
OBJECT-TYPE
	EnableValue

rcPortVplsDualHoming		1.3.6.1.4.1.2272.1.4.10.1.1.59
The VPLS dual homing is for VPLS service type only. It can be disable, firstNNI or secondNNI.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), firstNNI(1), secondNNI(2)

rcPortVplsMgmtVlan		1.3.6.1.4.1.2272.1.4.10.1.1.60
Management Vlan is configured on this port
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortTlsManagedBySp		1.3.6.1.4.1.2272.1.4.10.1.1.61
True/False tls devices on port Managed By Service Provider.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortAutoNegAd		1.3.6.1.4.1.2272.1.4.10.1.1.62
This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. Only capabilities present in the hardware as indicated by rcPortAutoNegAdCapability can be advertised. The default value for this object will be the value of the associated instance of rcPortAutoNegAdCapability.
Status: current	Access: read-write
OBJECT-TYPE
	BITS	advertise10Half(0), advertise10Full(1), advertise100Half(2), advertise100Full(3), advertise1000Half(4), advertise1000Full(5), advertiseMacPause(6), advertiseAsymPause(7)

rcPortAutoNegAdCapability		1.3.6.1.4.1.2272.1.4.10.1.1.63
This object indicates the port speed and duplex capabilities that hardware can actually support on a port, and which may be advertised by the port using auto-negotiation. Bit 7 tells if a port supports pause frame capabilities (for full-duplex links) as a part of the advertisement. bit 0 - 10 half duplex advertisements bit 1 - 10 full duplex advertisements bit 2 - 100 half duplex advertisements bit 3 - 100 full duplex advertisements bit 4 - 1000 half duplex advertisements bit 5 - 1000 full duplex advertisements bit 6 - Mac PAUSE frame support advertisements bit 7 - Asymmetric PAUSE frame support advertisements If auto negotiation is not supported by the port hardware, then all bits will reflect a value of zero.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	advertise10Half(0), advertise10Full(1), advertise100Half(2), advertise100Full(3), advertise1000Half(4), advertise1000Full(5), advertiseMacPause(6), advertiseAsymPause(7)

rcPortAutoRecoverPort		1.3.6.1.4.1.2272.1.4.10.1.1.64
enable or disable auto recovery of port from action taken by cp-limit, link flap or loop detect features
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortExtCplimitConf		1.3.6.1.4.1.2272.1.4.10.1.1.65
Indicates the port configuration for extended CP-LIMIT
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), softDown(2), hardDown(3)

rcPortExtCplimitUtilRate		1.3.6.1.4.1.2272.1.4.10.1.1.66
Threshold for Ingress traffic utilization rate of the port for extended CP-LIMIT
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..100

rcPortEgressRateLimit		1.3.6.1.4.1.2272.1.4.10.1.1.67
Egress Rate Limit.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1000..10000000

rcPortEgressRateLimitState		1.3.6.1.4.1.2272.1.4.10.1.1.68
Used to enable/disable shape/egress-rate-limit functionality.
Status: current	Access: read-write
OBJECT-TYPE
	EnableValue

rcPortBpduFilteringTimerCount		1.3.6.1.4.1.2272.1.4.10.1.1.69
The remaining time the port will be disabled due to a BPDU received when BPDU filtering is enabled.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval	0..6553500

rcPortBpduFilteringTimeout		1.3.6.1.4.1.2272.1.4.10.1.1.70
The time the port will be disabled when a BPDU is received when BPDU filtering is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TimeInterval	0..6553500

rcPortBpduFilteringAdminEnabled		1.3.6.1.4.1.2272.1.4.10.1.1.71
Used to enable/disable BPDU filtering.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortBpduFilteringOperEnabled		1.3.6.1.4.1.2272.1.4.10.1.1.72
Indicates whether BPDU filtering is actually enabled or disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

rcPortQinqEtherType		1.3.6.1.4.1.2272.1.4.10.1.1.73
The qinq ether type value. It is hex value. It should be displayed and input as Hex value. It is only be used when port is associated with QnQ service UNI. Otherwise, it would be ignored
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..FFFF

rcPortTrustDscp		1.3.6.1.4.1.2272.1.4.10.1.1.74
Used to enable/disable the trusted DSCP feature. If enabled, the internal qos-level and 802.1p value are derived from the received packet's DSCP value. This MIB object is applicable to ports in 8348GTX so that higher priority IP traffic can bypass the oversubscribed cascading link.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortCpLimitEnable		1.3.6.1.4.1.2272.1.4.10.1.1.75
Used to enable/disable the control packet rate limit. Specifies whether or not rate limiting is currently in operation for multicast and broadcast packets for the specified port.
Status: current	Access: read-write
OBJECT-TYPE
	EnableValue

rcPortCpMulticastLimit		1.3.6.1.4.1.2272.1.4.10.1.1.76
Used to limit Multicast traffic on the specified port. Sets the limit in packets per second.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1000..100000

rcPortCpBroadcastLimit		1.3.6.1.4.1.2272.1.4.10.1.1.77
Used to limit Broadcast traffic on the specified port. Sets the limit in packets per second.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1000..100000

rcPortSmartAutoNegotiate		1.3.6.1.4.1.2272.1.4.10.1.1.78
This object indicates whether 'smart' autonegotiation is enabled on a port (smart autonegotiation indicates that the port can sense whether its partner has autonegotiation enabled). This object, when supported, works in conjunction with rcPortAutoNegotiate. It is an inconsistentValue error to set rcPortAutoNegotiate to false(2) and this object to true(1) in the same Set request. Setting the object to true(1) will automatically change rcPortAutoNegotiate to true(1). Similarly, setting rcPortAutoNegotiate to false(2) will automatically change this object to false(2).
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortPcapTable		1.3.6.1.4.1.2272.1.4.10.2
Port pcap Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcPortPcapEntry

rcPortPcapEntry		1.3.6.1.4.1.2272.1.4.10.2.1
Entry containing pcap info. for a particular port
Status: current	Access: not-accessible
OBJECT-TYPE
	RcPortPcapEntry

rcPortPcapIndex		1.3.6.1.4.1.2272.1.4.10.2.1.1
An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

rcPortPcapEnable		1.3.6.1.4.1.2272.1.4.10.2.1.2
To enable pcap for the port
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortPcapMode		1.3.6.1.4.1.2272.1.4.10.2.1.3
Mode in which pcap is enabled
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	tx(1), rx(2), both(3), rxFilter(4)

rcPortPcapFilterListSize		1.3.6.1.4.1.2272.1.4.10.2.1.4
Used to indicate the number of filter list(s) that are assigned to this port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..128

rcPortPcapFilterList		1.3.6.1.4.1.2272.1.4.10.2.1.5
Used to indicate zero or more filter lists that are associated with this port for pcap. Each filter list identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

rcPortPoe		1.3.6.1.4.1.2272.1.4.10.3
OBJECT IDENTIFIER

rcPortPoePseIndexTable		1.3.6.1.4.1.2272.1.4.10.3.1
Port table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcPortPoePseIndexEntry

rcPortPoePseIndexEntry		1.3.6.1.4.1.2272.1.4.10.3.1.1
Entry containing info. for a particular port
Status: current	Access: not-accessible
OBJECT-TYPE
	RcPortPoePseIndexEntry

rcPortPoePseIndexIfIndex		1.3.6.1.4.1.2272.1.4.10.3.1.1.1
An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

rcPortPoePseIndexGroupIndex		1.3.6.1.4.1.2272.1.4.10.3.1.1.2
An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

rcPortPoePseIndexPortIndex		1.3.6.1.4.1.2272.1.4.10.3.1.1.3
This variable uniquely identifies the power Ethernet PSE port within group rcPoePseGroupIndex to which the power Ethernet PSE entry is connected.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

rcPortPoeMainPseExtnTable		1.3.6.1.4.1.2272.1.4.10.3.2
Port table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcPortPoeMainPseExtnEntry

rcPortPoeMainPseExtnEntry		1.3.6.1.4.1.2272.1.4.10.3.2.1
Entry containing info. for a particular port
Status: current	Access: not-accessible
OBJECT-TYPE
	RcPortPoeMainPseExtnEntry

rcPortPoeMainPseExtnGroupIndex		1.3.6.1.4.1.2272.1.4.10.3.2.1.1
An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

rcPortPoeMainPseExtnPwrAdmin		1.3.6.1.4.1.2272.1.4.10.3.2.1.2
An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex.
Status: current	Access: read-write
OBJECT-TYPE
	EnableValue

rcPortPoeMainPseExtnPwrPriority		1.3.6.1.4.1.2272.1.4.10.3.2.1.3
An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	critical(1), high(2), low(3)

rcPortPoeMainPseExtnDeviceDetectType		1.3.6.1.4.1.2272.1.4.10.3.2.1.4
An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	p802dot3af(1), p802dot3afAndLegacy(2)

rcPortPoeMainPseExtnPwrLimit		1.3.6.1.4.1.2272.1.4.10.3.2.1.5
The maximum available PoE power of the main PSE expressed in Watts.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	37..800

rcPortPoePsePortExtnTable		1.3.6.1.4.1.2272.1.4.10.3.3
Port table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcPortPoePsePortExtnEntry

rcPortPoePsePortExtnEntry		1.3.6.1.4.1.2272.1.4.10.3.3.1
Entry containing info. for a particular port
Status: current	Access: not-accessible
OBJECT-TYPE
	RcPortPoePsePortExtnEntry

rcPortPoePsePortExtnGroupIndex		1.3.6.1.4.1.2272.1.4.10.3.3.1.1
An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

rcPortPoePsePortExtnPortIndex		1.3.6.1.4.1.2272.1.4.10.3.3.1.2
An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

rcPortPoePsePortExtnPwrLimit		1.3.6.1.4.1.2272.1.4.10.3.3.1.3
An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	3..16

rcPortPoePsePortExtnMeasuredVolt		1.3.6.1.4.1.2272.1.4.10.3.3.1.4
An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPortPoePsePortExtnMeasuredCurrent		1.3.6.1.4.1.2272.1.4.10.3.3.1.5
An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPortPoePsePortExtnPwrConsumpt		1.3.6.1.4.1.2272.1.4.10.3.3.1.6
An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPortLacpTable		1.3.6.1.4.1.2272.1.4.10.4
Port LACP table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcPortLacpEntry

rcPortLacpEntry		1.3.6.1.4.1.2272.1.4.10.4.1
Entry containing info. for a particular port
Status: current	Access: not-accessible
OBJECT-TYPE
	RcPortLacpEntry

rcPortLacpAdminEnable		1.3.6.1.4.1.2272.1.4.10.4.1.1
Administratively enable/disable LACP on a port
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortLacpOperEnable		1.3.6.1.4.1.2272.1.4.10.4.1.2
Indicates if LACP is operationally enabled or disabled on a port
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

rcPortLacpFastPeriodicTime		1.3.6.1.4.1.2272.1.4.10.4.1.3
The number of miliseconds between periodic transmissions using Short Timeouts.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	200..20000

rcPortLacpSlowPeriodicTime		1.3.6.1.4.1.2272.1.4.10.4.1.4
The number of miliseconds between periodic transmissions using LONG Timeouts.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	10000..30000

rcPortLacpTimeoutScale		1.3.6.1.4.1.2272.1.4.10.4.1.5
Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

rcPortLacpAggrWaitTime		1.3.6.1.4.1.2272.1.4.10.4.1.6
The number of mili seconds to delay aggregation to allow multiple links to aggregate simultaneously.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	200..2000

rcPortLacpFastPeriodicTimeOper		1.3.6.1.4.1.2272.1.4.10.4.1.7
The operating value of fast periodic timer on the port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	10..20000

rcPortLacpSlowPeriodicTimeOper		1.3.6.1.4.1.2272.1.4.10.4.1.8
The operating value of slow periodic timer on the port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	10..30000

rcPortLacpTimeoutScaleOper		1.3.6.1.4.1.2272.1.4.10.4.1.9
The operating value of timeout scale on the port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..10

rcPortLacpAggrWaitTimeOper		1.3.6.1.4.1.2272.1.4.10.4.1.10
The operating value of aggreagate wait time on port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	10..2000

rcPortVLacpTable		1.3.6.1.4.1.2272.1.4.10.5
Port Virtual LACP table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcPortVLacpEntry

rcPortVLacpEntry		1.3.6.1.4.1.2272.1.4.10.5.1
Entry containing info. for a particular port
Status: current	Access: not-accessible
OBJECT-TYPE
	RcPortVLacpEntry

rcPortVLacpAdminEnable		1.3.6.1.4.1.2272.1.4.10.5.1.1
Administratively enable/disable Virtual LACP on a port
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortVLacpOperEnable		1.3.6.1.4.1.2272.1.4.10.5.1.2
Indicates if Virtual LACP is operationally enabled or disabled on a port
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

rcPortVLacpFastPeriodicTimer		1.3.6.1.4.1.2272.1.4.10.5.1.3
The number of miliseconds between periodic transmissions using Short Timeouts
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	200..20000

rcPortVLacpSlowPeriodicTimer		1.3.6.1.4.1.2272.1.4.10.5.1.4
The number of miliseconds between periodic transmissions using LONG Timeouts.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	10000..30000

rcPortVLacpTimeout		1.3.6.1.4.1.2272.1.4.10.5.1.5
Timeout control value. Long or Short Timeout
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	short(1), long(2)

rcPortVLacpTimeoutScale		1.3.6.1.4.1.2272.1.4.10.5.1.6
Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

rcPortVLacpEtherType		1.3.6.1.4.1.2272.1.4.10.5.1.7
VLACP Protocol Identification. The id value is in Hex
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

rcPortVLacpEtherMacAddress		1.3.6.1.4.1.2272.1.4.10.5.1.8
Multicast Mac Address exclusively used for VLACPDU's
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

rcPortVLacpPortState		1.3.6.1.4.1.2272.1.4.10.5.1.9
Display the Vlacp Port State.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

rcPortVLacpDualHomingEnable		1.3.6.1.4.1.2272.1.4.10.5.1.10
Enable/Disable Dual homing on Virtual LACP on a port
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortRemoteMirroringTable		1.3.6.1.4.1.2272.1.4.10.6
Port Remote Mirroring Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcPortRemoteMirroringEntry

rcPortRemoteMirroringEntry		1.3.6.1.4.1.2272.1.4.10.6.1
Entry containing remote mirroring info. for a particular port
Status: current	Access: not-accessible
OBJECT-TYPE
	RcPortRemoteMirroringEntry

rcPortRemoteMirroringIndex		1.3.6.1.4.1.2272.1.4.10.6.1.1
An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

rcPortRemoteMirroringEnable		1.3.6.1.4.1.2272.1.4.10.6.1.2
To enable remote Mirroring for the port
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortRemoteMirroringMode		1.3.6.1.4.1.2272.1.4.10.6.1.3
Mode in which remote mirroring is enabled
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	source(1), termination(2)

rcPortRemoteMirroringSrcMac		1.3.6.1.4.1.2272.1.4.10.6.1.4
Source Mac of the remote mirrored packet. Remote mirroring packet will be send with this source mac address
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

rcPortRemoteMirroringDstMac		1.3.6.1.4.1.2272.1.4.10.6.1.5
Destination Mac of the remote mirrored packet. Packets will be bridged to this mac address. Remote mirroring packet will be send to this mac address
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

rcPortRemoteMirroringEtherType		1.3.6.1.4.1.2272.1.4.10.6.1.6
Ethertype of the remote mirrored packet. Packets will be send with this ethertype
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

rcPortRemoteMirroringVlanIdListSize		1.3.6.1.4.1.2272.1.4.10.6.1.7
Used to indicate the number of VLAN IDs that are assigned to this port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..2000

rcPortRemoteMirroringVlanIdList		1.3.6.1.4.1.2272.1.4.10.6.1.8
This field is used only if the port is assigned as remote mirroring termination port. Represents zero or more filter lists vlan in which the Destination Mac address resides. Each VLAN ID is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4096)

rcPortRemoteMirroringRowStatus		1.3.6.1.4.1.2272.1.4.10.6.1.9
RowStatus
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

rcPortVlacpSessionTable		1.3.6.1.4.1.2272.1.4.10.7
A table used to maintain Vlacp session values.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcPortVlacpSessionEntry

rcPortVlacpSessionEntry		1.3.6.1.4.1.2272.1.4.10.7.1
Entry containing Vlacp Session information regarding a particular port or mlt.
Status: current	Access: not-accessible
OBJECT-TYPE
	RcPortVlacpSessionEntry

rcPortVlacpSessionIfIndex		1.3.6.1.4.1.2272.1.4.10.7.1.1
IfIndex of the port or Mlt
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..2147483647

rcPortVlacpSessionSesNumber		1.3.6.1.4.1.2272.1.4.10.7.1.2
Session number of an IfIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..2147483647

rcPortVlacpSessionSrcMacAddress		1.3.6.1.4.1.2272.1.4.10.7.1.3
Mac Address for the session
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

rcPortVlacpSessionRxTimer		1.3.6.1.4.1.2272.1.4.10.7.1.4
The Rx timer for the session
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPortVlacpSessionValidbit		1.3.6.1.4.1.2272.1.4.10.7.1.5
The valid bit for the session
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	inValidSession(0), validSession(1)

rcPortVlacpSessionInPktCount		1.3.6.1.4.1.2272.1.4.10.7.1.6
The In packet count for the session
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcPortMgmtLinkTable		1.3.6.1.4.1.2272.1.4.10.8
Port card mgmt port link table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcPortMgmtLinkEntry

rcPortMgmtLinkEntry		1.3.6.1.4.1.2272.1.4.10.8.1
Entry containing info. for a particular mgmt port in I/O card
Status: current	Access: not-accessible
OBJECT-TYPE
	RcPortMgmtLinkEntry

rcPortMgmtLinkIndex		1.3.6.1.4.1.2272.1.4.10.8.1.1
IfIndex of the port.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

rcPortMgmtLinkDescr		1.3.6.1.4.1.2272.1.4.10.8.1.2
Port description
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

rcPortMgmtLinkOperStatus		1.3.6.1.4.1.2272.1.4.10.8.1.3
admin status of the mgmt port
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2), unknown(3)

rcPortMgmtLinkAutoNegotiate		1.3.6.1.4.1.2272.1.4.10.8.1.4
Auto-negotiation status of the port
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

rcPortMgmtLinkDuplex		1.3.6.1.4.1.2272.1.4.10.8.1.5
duplex setting for the port
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	half(1), full(2)

rcPortMgmtLinkSpeed		1.3.6.1.4.1.2272.1.4.10.8.1.6
speed setting for this port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), mbps10(1), mbps100(2), mbps1000(3)

rcPortFlushFdbTable		1.3.6.1.4.1.2272.1.4.10.9
Port Flush Fdbtable
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcPortFlushFdbEntry

rcPortFlushFdbEntry		1.3.6.1.4.1.2272.1.4.10.9.1
port based deletion of mac addresses learned or discarded on that port
Status: current	Access: not-accessible
OBJECT-TYPE
	RcPortFlushFdbEntry

rcPortFlushFdbAddress		1.3.6.1.4.1.2272.1.4.10.9.1.1
Mac Address to be deleted.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(17)

rcPortFlushFdbVlanId		1.3.6.1.4.1.2272.1.4.10.9.1.2
vlan Id associated with the Mac Address
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..4094

rcPortLock		1.3.6.1.4.1.2272.1.4.11
OBJECT IDENTIFIER

rcPortLockEnable		1.3.6.1.4.1.2272.1.4.11.1
Indicate whether the port lock feature is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rcPortLockLockedPorts		1.3.6.1.4.1.2272.1.4.11.2
The set of ports that are administratively locked. Locked ports cannot be modified in anyway until the port is unlocked first.
Status: current	Access: read-write
OBJECT-TYPE
	PortSet

rcTestExtTable		1.3.6.1.4.1.2272.1.11.1
Test extension table. This table augments the standard ifTestTable table in RFC1573.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcTestEntry

rcTestEntry		1.3.6.1.4.1.2272.1.11.1.1
Proprietary test variables.
Status: current	Access: not-accessible
OBJECT-TYPE
	RcTestEntry

rcTestExtIfIndex		1.3.6.1.4.1.2272.1.11.1.1.1
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

rcTestExtPassCount		1.3.6.1.4.1.2272.1.11.1.1.2
The number of iterations of the test case that completed successfully.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcTestExtFailCount		1.3.6.1.4.1.2272.1.11.1.1.3
The number of iterations of the test case that failed.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rcTestTypes		1.3.6.1.4.1.2272.1.11.2
OBJECT IDENTIFIER

rcTestTypesFabric		1.3.6.1.4.1.2272.1.11.2.1
OBJECT IDENTIFIER

rcTestTypesArTable		1.3.6.1.4.1.2272.1.11.2.2
OBJECT IDENTIFIER

rcTestTypesExtLoopBack		1.3.6.1.4.1.2272.1.11.2.3
OBJECT IDENTIFIER

rcTestCodes		1.3.6.1.4.1.2272.1.11.3
OBJECT IDENTIFIER

rcTestCodesNoReceive		1.3.6.1.4.1.2272.1.11.3.1
OBJECT IDENTIFIER

rcTestCodesBadSeq		1.3.6.1.4.1.2272.1.11.3.2
OBJECT IDENTIFIER

rcTestCodesBadLen		1.3.6.1.4.1.2272.1.11.3.3
OBJECT IDENTIFIER

rcTestCodesBadData		1.3.6.1.4.1.2272.1.11.3.4
OBJECT IDENTIFIER

rcStatTable		1.3.6.1.4.1.2272.1.12.1
A table used to store port statistics.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RcStatEntry

rcStatEntry		1.3.6.1.4.1.2272.1.12.1.1
interface counters
Status: current	Access: not-accessible
OBJECT-TYPE
	RcStatEntry

rcStatPortIndex		1.3.6.1.4.1.2272.1.12.1.1.1
An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

rcStatFrameTooShorts		1.3.6.1.4.1.2272.1.12.1.1.2
The total number of frames that are too short that were encountered on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatBridgeInUnicastFrames		1.3.6.1.4.1.2272.1.12.1.1.3
The total number of incoming unicast frames that were bridged.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatBridgeInMulticastFrames		1.3.6.1.4.1.2272.1.12.1.1.4
The total number of incoming multicast frames that were bridged.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatBridgeInBroadcastFrames		1.3.6.1.4.1.2272.1.12.1.1.5
The total number of incoming broadcast frames that were bridged.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatBridgeInDiscards		1.3.6.1.4.1.2272.1.12.1.1.6
The total number of frames that were discarded by the bridging entity.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatBridgeOutUnicastFrames		1.3.6.1.4.1.2272.1.12.1.1.7
The total number of outgoing unicast frames that were bridged.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatBridgeOutMulticastFrames		1.3.6.1.4.1.2272.1.12.1.1.8
The total number of outgoing multicast frames that were bridged.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatBridgeOutBroadcastFrames		1.3.6.1.4.1.2272.1.12.1.1.9
The total number of outgoing broadcast frames that were bridged.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatRouteInUnicastFrames		1.3.6.1.4.1.2272.1.12.1.1.10
The total number of incoming unicast frames that were routed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatRouteInMulticastFrames		1.3.6.1.4.1.2272.1.12.1.1.11
The total number of incoming multicast frames that were routed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatRouteInDiscards		1.3.6.1.4.1.2272.1.12.1.1.12
The total number of frames that were discarded by the routing entity.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatRouteOutUnicastFrames		1.3.6.1.4.1.2272.1.12.1.1.13
The total number of outgoing unicast frames that were routed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatRouteOutMulticastFrames		1.3.6.1.4.1.2272.1.12.1.1.14
The total number of outgoing multicast frames that were routed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatStgForwardTransitions		1.3.6.1.4.1.2272.1.12.1.1.15
The number of times this port has transitioned from the Learning state to the Forwarding state.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatStgInConfigBpdus		1.3.6.1.4.1.2272.1.12.1.1.16
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatStgInTcnBpdus		1.3.6.1.4.1.2272.1.12.1.1.17
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatStgInBadBpdus		1.3.6.1.4.1.2272.1.12.1.1.18
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatStgOutConfigBpdus		1.3.6.1.4.1.2272.1.12.1.1.19
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatStgOutTcnBpdus		1.3.6.1.4.1.2272.1.12.1.1.20
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rcStatBridgeOutFrames		1.3.6.1.4.1.2272.1.12.1.1.21
Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual counters are not supported.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32