REDLINE-AN50-PMP-V1-MIB

File: REDLINE-AN50-PMP-V1-MIB.mib (14142 bytes)

Imported modules

RFC1155-SMI SNMPv2-TC

Imported symbols

OBJECT-TYPE IpAddress enterprises
TimeTicks RowStatus

Defined Types

An50pmpLinkEntry  
SEQUENCE    
  an50pmpLinkID INTEGER
  an50pmpLinkName OCTET STRING
  an50pmpLinkGroupID INTEGER
  an50pmpLinkPeerMac OCTET STRING
  an50pmpLinkMaxDLBurstRate INTEGER
  an50pmpLinkMaxULBurstRate INTEGER
  an50pmpLinkMaxHost INTEGER
  an50pmpLinkCIDDLCIR INTEGER
  an50pmpLinkCIDDLPIR INTEGER
  an50pmpLinkCIDULCIR INTEGER
  an50pmpLinkCIDULPIR INTEGER
  an50pmpLinkDLQoS INTEGER
  an50pmpLinkULQoS INTEGER
  an50pmpLinkRowStatus RowStatus

An50pmpLinkStatusEntry  
SEQUENCE    
  an50pmpLinkStatusID INTEGER
  an50pmpLinkStatus INTEGER
  an50pmpLinkStatusCode INTEGER
  an50pmpLinkRegConn INTEGER
  an50pmpLinkDLBurstRate INTEGER
  an50pmpLinkDLRSSI INTEGER
  an50pmpLinkDLSINADR INTEGER
  an50pmpLinkDLStatLostFrm INTEGER
  an50pmpLinkDLStatBlksTot INTEGER
  an50pmpLinkDLStatBlksRetr INTEGER
  an50pmpLinkDLStatBlksDisc INTEGER
  an50pmpLinkDLCIDStatPktDisc INTEGER
  an50pmpLinkDLCIDStatPktTran INTEGER
  an50pmpLinkDLCIDStatPktRecv INTEGER
  an50pmpLinkULBurstRate INTEGER
  an50pmpLinkULRSSI INTEGER
  an50pmpLinkULSINADR INTEGER
  an50pmpLinkULStatLostFrm INTEGER
  an50pmpLinkULStatBlksTot INTEGER
  an50pmpLinkULStatBlksRetr INTEGER
  an50pmpLinkULStatBlksDisc INTEGER
  an50pmpLinkULCIDStatPktDisc INTEGER
  an50pmpLinkULCIDStatPktTran INTEGER
  an50pmpLinkULCIDStatPktRecv INTEGER
  an50pmpLinkUpTime TimeTicks
  an50pmpLinkLostCount INTEGER

Defined Values

redline 1.3.6.1.4.1.10728
OBJECT IDENTIFIER    

redlineProducts 1.3.6.1.4.1.10728.1
OBJECT IDENTIFIER    

redlineMgmt 1.3.6.1.4.1.10728.2
OBJECT IDENTIFIER    

redlineAN50 1.3.6.1.4.1.10728.1.1
OBJECT IDENTIFIER    

redlineAN50PMPV1 1.3.6.1.4.1.10728.2.51
OBJECT IDENTIFIER    

an50pmpLinkTable 1.3.6.1.4.1.10728.2.51.1
Table with Wireless links and connections information configured into AN50 PMP device based on V1 processor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    An50pmpLinkEntry

an50pmpLinkEntry 1.3.6.1.4.1.10728.2.51.1.1
A unique set of link parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  An50pmpLinkEntry  

an50pmpLinkID 1.3.6.1.4.1.10728.2.51.1.1.1
Link ID, a unique number between 1 and 1024 that identifies a particular link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

an50pmpLinkName 1.3.6.1.4.1.10728.2.51.1.1.2
The name of the Link/Connection
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

an50pmpLinkGroupID 1.3.6.1.4.1.10728.2.51.1.1.3
Group assigned to this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1024  

an50pmpLinkPeerMac 1.3.6.1.4.1.10728.2.51.1.1.4
Link Destination MAC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

an50pmpLinkMaxDLBurstRate 1.3.6.1.4.1.10728.2.51.1.1.5
Maximum downlink rate for this link. Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4, 24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

an50pmpLinkMaxULBurstRate 1.3.6.1.4.1.10728.2.51.1.1.6
Maximum uplink rate for this link. Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4, 24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

an50pmpLinkMaxHost 1.3.6.1.4.1.10728.2.51.1.1.7
Maximum number of hosts for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

an50pmpLinkCIDDLCIR 1.3.6.1.4.1.10728.2.51.1.1.8
The downlink commited rate for this connection in kb/s.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

an50pmpLinkCIDDLPIR 1.3.6.1.4.1.10728.2.51.1.1.9
The downlink peak rate for this connection in kb/s.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

an50pmpLinkCIDULCIR 1.3.6.1.4.1.10728.2.51.1.1.10
The uplink commited rate for this connection in kb/s.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

an50pmpLinkCIDULPIR 1.3.6.1.4.1.10728.2.51.1.1.11
The uplink peak rate for this connection in kb/s.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

an50pmpLinkDLQoS 1.3.6.1.4.1.10728.2.51.1.1.12
The downlink QoS level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..54  

an50pmpLinkULQoS 1.3.6.1.4.1.10728.2.51.1.1.13
The uplink QoS level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..54  

an50pmpLinkRowStatus 1.3.6.1.4.1.10728.2.51.1.1.14
Status of the row
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

an50pmpLinkStatusTable 1.3.6.1.4.1.10728.2.51.2
Statistics per uplink connections.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    An50pmpLinkStatusEntry

an50pmpLinkStatusEntry 1.3.6.1.4.1.10728.2.51.2.1
Statistics for a link connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  An50pmpLinkStatusEntry  

an50pmpLinkStatusID 1.3.6.1.4.1.10728.2.51.2.1.1
Index for an50pmpLinkStatusTable table
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

an50pmpLinkStatus 1.3.6.1.4.1.10728.2.51.2.1.2
Status of the Link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

an50pmpLinkStatusCode 1.3.6.1.4.1.10728.2.51.2.1.3
Alarm bits shown as a hex number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkRegConn 1.3.6.1.4.1.10728.2.51.2.1.4
Number of connections configured for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

an50pmpLinkDLBurstRate 1.3.6.1.4.1.10728.2.51.2.1.5
Current master Tx burst rate. Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4, 24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

an50pmpLinkDLRSSI 1.3.6.1.4.1.10728.2.51.2.1.6
RSSI (Received Signal Strength Indicator) at slave.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkDLSINADR 1.3.6.1.4.1.10728.2.51.2.1.7
SINADR (Signal Interference and Noise Distorsion Ratio) at slave.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkDLStatLostFrm 1.3.6.1.4.1.10728.2.51.2.1.8
SINADR at slave.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkDLStatBlksTot 1.3.6.1.4.1.10728.2.51.2.1.9
Blocks transmitted from master to slave.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkDLStatBlksRetr 1.3.6.1.4.1.10728.2.51.2.1.10
Block re-transmitted from master to slave.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkDLStatBlksDisc 1.3.6.1.4.1.10728.2.51.2.1.11
Blocks lost from master to slave
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkDLCIDStatPktDisc 1.3.6.1.4.1.10728.2.51.2.1.12
Packets discarded by master due to buffer full.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkDLCIDStatPktTran 1.3.6.1.4.1.10728.2.51.2.1.13
Packets transmitted from master to slave.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkDLCIDStatPktRecv 1.3.6.1.4.1.10728.2.51.2.1.14
Packets received by slave
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkULBurstRate 1.3.6.1.4.1.10728.2.51.2.1.15
Current Slave Tx Burst Rate. Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4, 24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

an50pmpLinkULRSSI 1.3.6.1.4.1.10728.2.51.2.1.16
RSSI at master.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkULSINADR 1.3.6.1.4.1.10728.2.51.2.1.17
SINADR at master.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkULStatLostFrm 1.3.6.1.4.1.10728.2.51.2.1.18
Frames lost from slave to master
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkULStatBlksTot 1.3.6.1.4.1.10728.2.51.2.1.19
Blocks transmitted slave to master.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkULStatBlksRetr 1.3.6.1.4.1.10728.2.51.2.1.20
Block re-transmitted slave to master.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkULStatBlksDisc 1.3.6.1.4.1.10728.2.51.2.1.21
Blocks lost from slave to master.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkULCIDStatPktDisc 1.3.6.1.4.1.10728.2.51.2.1.22
Packets discarded by slave due to buffer full.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkULCIDStatPktTran 1.3.6.1.4.1.10728.2.51.2.1.23
Packets transmitted from slave to master.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkULCIDStatPktRecv 1.3.6.1.4.1.10728.2.51.2.1.24
Packets received by master from slave.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpLinkUpTime 1.3.6.1.4.1.10728.2.51.2.1.25
Time since the link is UP (in hundreth a of second).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

an50pmpLinkLostCount 1.3.6.1.4.1.10728.2.51.2.1.26
Number of times the link has been lost.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

an50pmpCIDSaveConfig 1.3.6.1.4.1.10728.2.51.3
The attribute saves the entire config set of the AN50 PMP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER donothing(1), saveConfig(2)  

an50pmpLastModifiedCID 1.3.6.1.4.1.10728.2.51.4
The attribute represents the last modified CID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 4..1023  

an50pmpLastMissedSsMacAddress 1.3.6.1.4.1.10728.2.51.5
MAC address of the SS that missed the registration with the BS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

an50pmpLastRegisteredSsMacAddress 1.3.6.1.4.1.10728.2.51.6
MAC address of the last SS that successfuly registered with the BS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

an50pmpLastSuccessfulID 1.3.6.1.4.1.10728.2.51.7
The ID of the Link registered in BS table that is sent through LastSuccessfulRegisteredSS Trap(number10).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 4..1023  

an50pmpLastDeniedSsMacAddress 1.3.6.1.4.1.10728.2.51.8
MAC address of the SS that will be denied by thisBS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING