REDLINE-BS-MIB

File: REDLINE-BS-MIB.mib (21898 bytes)

Imported modules

REDLINE-MIB SNMPv2-SMI SNMPv2-CONF
SNMPv2-TC INET-ADDRESS-MIB

Imported symbols

redlineSystem MODULE-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE Integer32 Unsigned32
OBJECT-GROUP NOTIFICATION-GROUP MODULE-COMPLIANCE
DateAndTime DisplayString RowStatus
InetAddress InetAddressType InetPortNumber

Defined Types

RedlineBsPowerSupplyEntry  
SEQUENCE    
  redlineBsPowerSupplyIndex Integer32
  redlineBsPowerSupplyName DisplayString
  redlineBsPowerSupplyType INTEGER
  redlineBsPowerSupplyStatus INTEGER

RedlineBsTemperatureEntry  
SEQUENCE    
  redlineBsUnitIndex Integer32
  redlineBsUnitName DisplayString
  redlineBsUnitType INTEGER
  redlineBsCurrTemperature Integer32

RedlineBsTempThresholdEntry  
SEQUENCE    
  redlineBsTempThresholdIndex Integer32
  redlineBsTempTrapThreshold Integer32
  redlineBsTempTrapClrThreshold Integer32
  redlineBsTempThresholdName DisplayString
  redlineBsTemperatureTrapTrigger INTEGER

RedlineBsFanEntry  
SEQUENCE    
  redlineBsFanIndex Integer32
  redlineBsFanName DisplayString
  redlineBsFanStatus INTEGER

Defined Values

redlineBsMib 1.3.6.1.4.1.10728.2.1.2
This MIB module contains object definitions applicable only to Redline Base Station.
MODULE-IDENTITY    

redlineBsDhcpObjects 1.3.6.1.4.1.10728.2.1.2.1
OBJECT IDENTIFIER    

redlineBsIpAddressSource 1.3.6.1.4.1.10728.2.1.2.1.1
Setting this variable to 1 causes the Base Station to obatain its ip address from DHCP server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dhcp(1), static(2)  

redlineBsDhcpPacketsRelay 1.3.6.1.4.1.10728.2.1.2.1.2
Setting this variable to 1 causes the Base Station to act as DHCP relay agent for SS. Note: This object can not be set to 'relay' if usage of DHCP server is disabled. An attempt to set the address will fail and return 'resourceUnavailable' error
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER relay(1), notRelay(2)  

redlineBsSntpObjects 1.3.6.1.4.1.10728.2.1.2.2
OBJECT IDENTIFIER    

redlineBsRefreshTime 1.3.6.1.4.1.10728.2.1.2.2.1
Setting this variable to 1 causes the Base Station to reconect to time server and synchronize the time
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(1), refresh(2)  

redlineBsDayLightSaving 1.3.6.1.4.1.10728.2.1.2.2.2
This variable indicates if Dalight saving is on.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

redlineBsTimezone 1.3.6.1.4.1.10728.2.1.2.2.3
This variable is a time zone set as +/- hours from Greenwich Mean Time (GMT). Note: This object can not be set if usage of DHCP server is enabled. An attempt to set the timezone will fail and return 'resourceUnavailable' error
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

redlineBsTimeServerIpAddressType 1.3.6.1.4.1.10728.2.1.2.2.4
The INET address type of Ip address of time server. IPv4 type supported only.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType ipv4(1)  

redlineBsTimeServerIpAddress 1.3.6.1.4.1.10728.2.1.2.2.5
The INET address of time server to whom Bs will communicate using SNTP protocol to obtain the GMT time.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

redlineBsTimezoneMin 1.3.6.1.4.1.10728.2.1.2.2.6
This variable contains a minutes part of time zone defined in 'redlineBsTimezone'. Note: This object can not be set if usage of DHCP server is enabled. An attempt to set the timezone will fail and return 'resourceUnavailable' error
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

redlineBsConfigSaveObjects 1.3.6.1.4.1.10728.2.1.2.3
OBJECT IDENTIFIER    

redlineBsSnmpConfigSave 1.3.6.1.4.1.10728.2.1.2.3.1
Setting this variable to 1 causes SNMP Configuration to be save in flash.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(1), save(2)  

redlineBsSfConfigSave 1.3.6.1.4.1.10728.2.1.2.3.2
Setting this variable to 2 causes Service Flow Configuration to be saved in flash.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noop(1), save(2)  

redlineBsSystemObjects 1.3.6.1.4.1.10728.2.1.2.4
OBJECT IDENTIFIER    

redlineBsRadioType 1.3.6.1.4.1.10728.2.1.2.4.1
This object indicates the radio type of Redline Bs.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

redlineBsRfObjects 1.3.6.1.4.1.10728.2.1.2.5
OBJECT IDENTIFIER    

redlineBsDownlinkChanFreq 1.3.6.1.4.1.10728.2.1.2.5.1
Current downlink channel frequency (kHz)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

redlineBsUplinkChanFreq 1.3.6.1.4.1.10728.2.1.2.5.2
Current uplink channel frequency (kHz)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

redlineBsPhyObjects 1.3.6.1.4.1.10728.2.1.2.6
OBJECT IDENTIFIER    

redlineBsChannelSize 1.3.6.1.4.1.10728.2.1.2.6.1
Current channel size (Khz).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

redlineBsEthObjects 1.3.6.1.4.1.10728.2.1.2.7
OBJECT IDENTIFIER    

redlineBsManagementAccess 1.3.6.1.4.1.10728.2.1.2.7.1
Indicates current management access configuration( either data or mgt port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dataPort(1), mgtPort(2)  

redlineBsDataPortSettings 1.3.6.1.4.1.10728.2.1.2.7.2
Indicates current settings of data port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER autoDetect(1), fullDuplex100(2), fullDuplex10(3), halfDuplex100(4), halfDuplex10(5)  

redlineBsMgtPortSettings 1.3.6.1.4.1.10728.2.1.2.7.3
Indicates current settings of mgt port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER autoDetect(1), fullDuplex100(2), fullDuplex10(3), halfDuplex100(4), halfDuplex10(5)  

redlineBsVlanObjects 1.3.6.1.4.1.10728.2.1.2.8
OBJECT IDENTIFIER    

redlineBsVlanTrafficTagging 1.3.6.1.4.1.10728.2.1.2.8.1
Indicates that management with VLAN tagged traffic is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

redlineBsVlanId 1.3.6.1.4.1.10728.2.1.2.8.2
VLAN identifier used to tag managment traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

redlineBsSmcObjects 1.3.6.1.4.1.10728.2.1.2.9
OBJECT IDENTIFIER    

redlineBsSmcCurrentOperMode 1.3.6.1.4.1.10728.2.1.2.9.1
Indicates BS SMC (Secondary Management Channel) operation window. At the beginning of a maintenance window (upgrade, config backup etc), the SMC will be assigned maximum bandwidth to the predetermined fixed rate. At the end of the maintenance window, the maximum bandwidth for the SMC will be reset to its normal rate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), maintenance(2)  

redlineBsPowerSupplyAndCoolingObjects 1.3.6.1.4.1.10728.2.1.2.10
OBJECT IDENTIFIER    

redlineBsPowerSupplyTable 1.3.6.1.4.1.10728.2.1.2.10.1
This table contains identification and status information about base station power supplies. A trap will be generated each time the power supply goes on or off. The traps generation can be enabled/disabled using Redline Trap Activation Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RedlineBsPowerSupplyEntry

redlineBsPowerSupplyEntry 1.3.6.1.4.1.10728.2.1.2.10.1.1
This entry contains status information about base station power supply.
Status: current Access: not-accessible
OBJECT-TYPE    
  RedlineBsPowerSupplyEntry  

redlineBsPowerSupplyIndex 1.3.6.1.4.1.10728.2.1.2.10.1.1.1
The index of the BS power supply table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

redlineBsPowerSupplyName 1.3.6.1.4.1.10728.2.1.2.10.1.1.2
Textual identification of base station power supply.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

redlineBsPowerSupplyType 1.3.6.1.4.1.10728.2.1.2.10.1.1.3
The power supply type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER internal(1), external(2), externalShared(3)  

redlineBsPowerSupplyStatus 1.3.6.1.4.1.10728.2.1.2.10.1.1.4
Indicates if the power supply is on/off.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

redlineBsTemperatureTable 1.3.6.1.4.1.10728.2.1.2.10.2
This table contains information about current temperature of base station hardware units.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RedlineBsTemperatureEntry

redlineBsTemperatureEntry 1.3.6.1.4.1.10728.2.1.2.10.2.1
This entry contains temperature information about single base station hardware unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  RedlineBsTemperatureEntry  

redlineBsUnitIndex 1.3.6.1.4.1.10728.2.1.2.10.2.1.1
The index of the BS current temperature table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

redlineBsUnitName 1.3.6.1.4.1.10728.2.1.2.10.2.1.2
The base station hardware unit name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

redlineBsUnitType 1.3.6.1.4.1.10728.2.1.2.10.2.1.3
The base station hardware unit type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER indoor(1), outdoor(2)  

redlineBsCurrTemperature 1.3.6.1.4.1.10728.2.1.2.10.2.1.4
Indicates the current temperature of base station hardware unit in Celsius.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -60..100  

redlineBsTempThresholdTable 1.3.6.1.4.1.10728.2.1.2.10.3
This table contains various temperature threshold which are used to trigger traps to alarm network manager about unit mulfunction. The table is indexed by 'redlineBsUnitIndex' and 'redlineBsTempThresholdIndex' objects. Some of the traps require clearing after the temperature is going back to normal. The traps can be enabled/disabled using Redline Trap Activation table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RedlineBsTempThresholdEntry

redlineBsTempThresholdEntry 1.3.6.1.4.1.10728.2.1.2.10.3.1
This entry contains single base station hardware unit temperarure threshold information.
Status: current Access: not-accessible
OBJECT-TYPE    
  RedlineBsTempThresholdEntry  

redlineBsTempThresholdIndex 1.3.6.1.4.1.10728.2.1.2.10.3.1.1
The index of the temperature threshold table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

redlineBsTempTrapThreshold 1.3.6.1.4.1.10728.2.1.2.10.3.1.2
Indicates the temperature threshold value which will be used to trigger a trap.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -60..100  

redlineBsTempTrapClrThreshold 1.3.6.1.4.1.10728.2.1.2.10.3.1.3
Indicates the temperature threshold value which will be used to clear a previosly generated trap.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -60..100  

redlineBsTempThresholdName 1.3.6.1.4.1.10728.2.1.2.10.3.1.4
Textual identification of temperature threshold.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

redlineBsTemperatureTrapTrigger 1.3.6.1.4.1.10728.2.1.2.10.3.1.5
Indicates if temperature traversal in upper or lower value direction is causing the trap.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER temperatureRising(1), temperatureFalling(2)  

redlineBsFanTable 1.3.6.1.4.1.10728.2.1.2.10.4
This table contains name and status information about base station cooling fans. Up to 3 entries are supported.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RedlineBsFanEntry

redlineBsFanEntry 1.3.6.1.4.1.10728.2.1.2.10.4.1
This entry contains information about single cooling fan.
Status: current Access: not-accessible
OBJECT-TYPE    
  RedlineBsFanEntry  

redlineBsFanIndex 1.3.6.1.4.1.10728.2.1.2.10.4.1.1
The index of the colling fans table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

redlineBsFanName 1.3.6.1.4.1.10728.2.1.2.10.4.1.2
Textual identification of base station fan.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

redlineBsFanStatus 1.3.6.1.4.1.10728.2.1.2.10.4.1.3
Indicates the base station fan is on/off.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

redlineBsNotificationObjects 1.3.6.1.4.1.10728.2.1.2.11
OBJECT IDENTIFIER    

redlineBsTrapMibObjects 1.3.6.1.4.1.10728.2.1.2.11.1
OBJECT IDENTIFIER    

redlineBsTrapType 1.3.6.1.4.1.10728.2.1.2.11.1.1
Indicates if the trap is for alarm condition or for its clearing.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER trapSet(1), trapClr(2)  

redlineBsTrapPowerSupplyIndex 1.3.6.1.4.1.10728.2.1.2.11.1.2
The index in the table representing BS power supply triggering the trap.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

redlineBsTrapUnitIndex 1.3.6.1.4.1.10728.2.1.2.11.1.3
The index of temperature table representing BS unit triggering the trap.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

redlineBsTrapTempThresholdIndex 1.3.6.1.4.1.10728.2.1.2.11.1.4
The index of the temperature threshold table representing the temperature threshold which passing is triggering the trap.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

redlineBsTrapDefinitions 1.3.6.1.4.1.10728.2.1.2.11.0
OBJECT IDENTIFIER    

redlineBsPowerSupplyStatusTrap 1.3.6.1.4.1.10728.2.1.2.11.0.1
Event that reports base station power supply status change (on/off).
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

redlineBsTempThresholdTrap 1.3.6.1.4.1.10728.2.1.2.11.0.2
Event that reports SW Upgrade progress and status changes.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

redlineBsConformance 1.3.6.1.4.1.10728.2.1.2.12
OBJECT IDENTIFIER    

redlineBsGroups 1.3.6.1.4.1.10728.2.1.2.12.1
OBJECT IDENTIFIER    

redlineBsCompls 1.3.6.1.4.1.10728.2.1.2.12.2
OBJECT IDENTIFIER    

redlineBsDhcpGroup 1.3.6.1.4.1.10728.2.1.2.12.1.1
Dhcp objects.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

redlineBsSntpGroup 1.3.6.1.4.1.10728.2.1.2.12.1.2
Sntp objects.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

redlineBsConfigSaveGroup 1.3.6.1.4.1.10728.2.1.2.12.1.3
Config save objects.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

redlineBsSystemGroup 1.3.6.1.4.1.10728.2.1.2.12.1.4
Config save objects.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

redlineBsRfGroup 1.3.6.1.4.1.10728.2.1.2.12.1.5
Config save objects.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

redlineBsPhyGroup 1.3.6.1.4.1.10728.2.1.2.12.1.6
Config save objects.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

redlineBsEthGroup 1.3.6.1.4.1.10728.2.1.2.12.1.7
Ethernet interface objects.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

redlineBsVlanGroup 1.3.6.1.4.1.10728.2.1.2.12.1.8
Vlan objects.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

redlineBsSmcGroup 1.3.6.1.4.1.10728.2.1.2.12.1.9
Smc objects.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

redlineBsPowerSupplyAndCoolingGroup 1.3.6.1.4.1.10728.2.1.2.12.1.10
Power supply, temperature and fans objects.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

redlineBsNotificationGroup 1.3.6.1.4.1.10728.2.1.2.12.1.11
Tok_String
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

redlineBsCompliance 1.3.6.1.4.1.10728.2.1.2.12.2.1
The compliance statement for SNMP entities that implement this MIB module.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE