RFC1389-MIB
File:
RFC1389-MIB.mib (14949 bytes)
Imported modules
Imported symbols
Defined Types
| Rip2IfStatEntry |
|
| SEQUENCE |
|
|
|
| |
rip2IfStatAddress |
IpAddress |
|
| |
rip2IfStatRcvBadPackets |
Counter |
|
| |
rip2IfStatRcvBadRoutes |
Counter |
|
| |
rip2IfStatSentUpdates |
Counter |
|
| |
rip2IfStatStatus |
INTEGER |
|
| Rip2IfConfEntry |
|
| SEQUENCE |
|
|
|
| |
rip2IfConfAddress |
IpAddress |
|
| |
rip2IfConfDomain |
RouteTag |
|
| |
rip2IfConfAuthType |
INTEGER |
|
| |
rip2IfConfAuthKey |
OCTET STRING |
Size(0..16) |
| |
rip2IfConfSend |
INTEGER |
|
| |
rip2IfConfReceive |
INTEGER |
|
| |
rip2IfConfDefaultMetric |
INTEGER |
|
| |
rip2IfConfStatus |
INTEGER |
|
| |
rip2IfConfSrcAddress |
IpAddress |
|
| Rip2PeerEntry |
|
| SEQUENCE |
|
|
|
| |
rip2PeerAddress |
IpAddress |
|
| |
rip2PeerDomain |
RouteTag |
|
| |
rip2PeerLastUpdate |
TimeTicks |
|
| |
rip2PeerVersion |
INTEGER |
|
| |
rip2PeerRcvBadPackets |
Counter |
|
| |
rip2PeerRcvBadRoutes |
Counter |
|
Defined Values
| mgmt |
1.3.6.1.2 |
| OBJECT IDENTIFIER |
|
|
|
| mib-2 |
1.3.6.1.2.1 |
| OBJECT IDENTIFIER |
|
|
|
| rip2 |
1.3.6.1.2.1.23 |
| OBJECT IDENTIFIER |
|
|
|
| rip2GlobalRouteChanges |
1.3.6.1.2.1.23.1.1 |
| The number of route changes made to the IP Route
Database by RIP. This does not include the refresh
of a route's age. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| rip2GlobalQueries |
1.3.6.1.2.1.23.1.2 |
| The number of responses sent to RIP queries
from other systems. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| rip2IfStatTable |
1.3.6.1.2.1.23.2 |
| A list of subnets which require separate
status monitoring in RIP. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
Rip2IfStatEntry |
|
| rip2IfStatEntry |
1.3.6.1.2.1.23.2.1 |
| A Single Routing Domain in a single Subnet. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Rip2IfStatEntry |
|
|
| rip2IfStatAddress |
1.3.6.1.2.1.23.2.1.1 |
| The IP Address of this system on the indicated
subnet. For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| rip2IfStatRcvBadPackets |
1.3.6.1.2.1.23.2.1.2 |
| The number of RIP response packets received by
the RIP process which were subsequently discarded
for any reason (e.g. a version 0 packet, or an
unknown command type). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| rip2IfStatRcvBadRoutes |
1.3.6.1.2.1.23.2.1.3 |
| The number of routes, in valid RIP packets,
which were ignored for any reason (e.g. unknown
address family, or invalid metric). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| rip2IfStatSentUpdates |
1.3.6.1.2.1.23.2.1.4 |
| The number of triggered RIP updates actually
sent on this interface. This explicitly does
NOT include full updates sent containing new
information. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| rip2IfStatStatus |
1.3.6.1.2.1.23.2.1.5 |
| Writing invalid has the effect of deleting
this interface. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
valid(1), invalid(2) |
|
| rip2IfConfTable |
1.3.6.1.2.1.23.3 |
| A list of subnets which require separate
configuration in RIP. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
Rip2IfConfEntry |
|
| rip2IfConfEntry |
1.3.6.1.2.1.23.3.1 |
| A Single Routing Domain in a single Subnet. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Rip2IfConfEntry |
|
|
| rip2IfConfAddress |
1.3.6.1.2.1.23.3.1.1 |
| The IP Address of this system on the indicated
subnet. For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| rip2IfConfDomain |
1.3.6.1.2.1.23.3.1.2 |
| Value inserted into the Routing Domain field
of all RIP packets sent on this interface. |
| Status: deprecated |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RouteTag |
|
|
| rip2IfConfAuthType |
1.3.6.1.2.1.23.3.1.3 |
| The type of Authentication used on this
interface. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
noAuthentication(1), simplePassword(2), md5(3) |
|
| rip2IfConfAuthKey |
1.3.6.1.2.1.23.3.1.4 |
| The value to be used as the Authentication Key
whenever the corresponding instance of
rip2IfConfAuthType has the value simplePassword
word. A modification of the corresponding
instance of rip2IfConfAuthType does not modify
the rip2IfConfAuthKey value. If a string shorter
than 16 octets is supplied, it will be left-
justified and padded to 16 octets, on the right,
with nulls (0x00).
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..16) |
|
| rip2IfConfSend |
1.3.6.1.2.1.23.3.1.5 |
| What the router sends on this interface.
ripVersion1 implies sending RIP updates compliant
with RFC 1058. rip1Compatible implies
broadcasting RIP-2 updates using RFC 1058 route
subsumption rules. ripVersion2 implies
multicasting RIP-2 updates. ripV1Demand indicates
the use of Demand RIP on a WAN interface under RIP
Version 1 rules. ripV2Demand indicates the use of
Demand RIP on a WAN interface under Version 2 rules. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
doNotSend(1), ripVersion1(2), rip1Compatible(3), ripVersion2(4), ripV1Demand(5), ripV2Demand(6) |
|
| rip2IfConfReceive |
1.3.6.1.2.1.23.3.1.6 |
| This indicates which version of RIP updates
are to be accepted. Note that rip2 and
rip1OrRip2 implies reception of multicast
packets. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
rip1(1), rip2(2), rip1OrRip2(3), doNotRecieve(4) |
|
| rip2IfConfDefaultMetric |
1.3.6.1.2.1.23.3.1.7 |
| This variable indicates the metric that is to
be used for the default route entry in RIP updates
originated on this interface. A value of zero
indicates that no default route should be
originated; in this case, a default route via
another router may be propagated. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..15 |
|
| rip2IfConfStatus |
1.3.6.1.2.1.23.3.1.8 |
| Writing invalid has the effect of deleting
this interface. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
valid(1), invalid(2) |
|
| rip2IfConfSrcAddress |
1.3.6.1.2.1.23.3.1.9 |
| The IP Address this system will use as a source
address on this interface. If it is a numbered
interface, this MUST be the same value as
rip2IfConfAddress. On unnumbered interfaces,
it must be the value of rip2IfConfAddress for
some interface on the system. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| rip2PeerTable |
1.3.6.1.2.1.23.4 |
| A list of RIP Peers. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
Rip2PeerEntry |
|
| rip2PeerEntry |
1.3.6.1.2.1.23.4.1 |
| Information regarding a single routing peer. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Rip2PeerEntry |
|
|
| rip2PeerAddress |
1.3.6.1.2.1.23.4.1.1 |
| The IP Address that the peer is using as its source
address. Note that on an unnumbered link, this may
not be a member of any subnet on the system. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| rip2PeerDomain |
1.3.6.1.2.1.23.4.1.2 |
| The value in the Routing Domain field in RIP
packets received from the peer. As domain suuport
is deprecated, this must be zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RouteTag |
|
|
| rip2PeerLastUpdate |
1.3.6.1.2.1.23.4.1.3 |
| The value of sysUpTime when the most recent
RIP update was received from this system. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| rip2PeerVersion |
1.3.6.1.2.1.23.4.1.4 |
| The RIP version number in the header of the
last RIP packet received. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..255 |
|
| rip2PeerRcvBadPackets |
1.3.6.1.2.1.23.4.1.5 |
| The number of RIP response packets from this
peer discarded as invalid. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| rip2PeerRcvBadRoutes |
1.3.6.1.2.1.23.4.1.6 |
| The number of routes from this peer that were
ignored because the entry format was invalid. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|