ROOMALERT12E-MIB

File: ROOMALERT12E-MIB.mib (16857 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215

Imported symbols

enterprises IpAddress Counter
TimeTicks OBJECT-TYPE TRAP-TYPE

Defined Values

avtech 1.3.6.1.4.1.20916
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.20916.1
OBJECT IDENTIFIER    

roomalert12E 1.3.6.1.4.1.20916.1.9
OBJECT IDENTIFIER    

sensors 1.3.6.1.4.1.20916.1.9.1
OBJECT IDENTIFIER    

lightTower 1.3.6.1.4.1.20916.1.9.2
OBJECT IDENTIFIER    

internal-sen 1.3.6.1.4.1.20916.1.9.1.1
OBJECT IDENTIFIER    

digital-sen1 1.3.6.1.4.1.20916.1.9.1.2
OBJECT IDENTIFIER    

digital-sen2 1.3.6.1.4.1.20916.1.9.1.3
OBJECT IDENTIFIER    

digital-sen3 1.3.6.1.4.1.20916.1.9.1.4
OBJECT IDENTIFIER    

switch1 1.3.6.1.4.1.20916.1.9.1.5
OBJECT IDENTIFIER    

switch2 1.3.6.1.4.1.20916.1.9.1.6
OBJECT IDENTIFIER    

switch3 1.3.6.1.4.1.20916.1.9.1.7
OBJECT IDENTIFIER    

switch4 1.3.6.1.4.1.20916.1.9.1.8
OBJECT IDENTIFIER    

analog 1.3.6.1.4.1.20916.1.9.1.9
OBJECT IDENTIFIER    

relay 1.3.6.1.4.1.20916.1.9.1.10
OBJECT IDENTIFIER    

traps 1.3.6.1.4.1.20916.1.9.3
OBJECT IDENTIFIER    

internal-sen-1 1.3.6.1.4.1.20916.1.9.1.1.1
If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

internal-sen-2 1.3.6.1.4.1.20916.1.9.1.1.2
If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

internal-sen-3 1.3.6.1.4.1.20916.1.9.1.1.3
If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

internal-sen-4 1.3.6.1.4.1.20916.1.9.1.1.4
If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

internal-sen-5 1.3.6.1.4.1.20916.1.9.1.1.5
If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

internal-sen-6 1.3.6.1.4.1.20916.1.9.1.1.6
Represents the sensor's label/
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

analog-1 1.3.6.1.4.1.20916.1.9.1.9.1
The current status of the Room Alert 12E analog input (0-5VDC).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

analog-2 1.3.6.1.4.1.20916.1.9.1.9.2
The analog sensor's label.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

relay-1 1.3.6.1.4.1.20916.1.9.1.10.1
The current status of the Room Alert 12E relay output.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

relay-2 1.3.6.1.4.1.20916.1.9.1.10.2
The relay output's label.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

digital-sen1-1 1.3.6.1.4.1.20916.1.9.1.2.1
If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen1-2 1.3.6.1.4.1.20916.1.9.1.2.2
If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen1-3 1.3.6.1.4.1.20916.1.9.1.2.3
If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen1-4 1.3.6.1.4.1.20916.1.9.1.2.4
If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen1-5 1.3.6.1.4.1.20916.1.9.1.2.5
If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen1-6 1.3.6.1.4.1.20916.1.9.1.2.6
Represents the sensor's label/
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

digital-sen2-1 1.3.6.1.4.1.20916.1.9.1.3.1
If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen2-2 1.3.6.1.4.1.20916.1.9.1.3.2
If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen2-3 1.3.6.1.4.1.20916.1.9.1.3.3
If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen2-4 1.3.6.1.4.1.20916.1.9.1.3.4
If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen2-5 1.3.6.1.4.1.20916.1.9.1.3.5
If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen2-6 1.3.6.1.4.1.20916.1.9.1.3.6
Represents the sensor's label/
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

digital-sen3-1 1.3.6.1.4.1.20916.1.9.1.4.1
If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen3-2 1.3.6.1.4.1.20916.1.9.1.4.2
If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen3-3 1.3.6.1.4.1.20916.1.9.1.4.3
If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen3-4 1.3.6.1.4.1.20916.1.9.1.4.4
If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen3-5 1.3.6.1.4.1.20916.1.9.1.4.5
If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

digital-sen3-6 1.3.6.1.4.1.20916.1.9.1.4.6
Represents the sensor's label/
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

switch-sen1-1 1.3.6.1.4.1.20916.1.9.1.5.1
The reading for switch sensor 1 (0 = OPEN, 1 = CLOSED).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

switch-sen1-2 1.3.6.1.4.1.20916.1.9.1.5.2
The label for switch sensor 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

switch-sen2 1.3.6.1.4.1.20916.1.9.1.6.1
The reading for switch sensor 2 (0 = OPEN, 1 = CLOSED).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

switch-sen2-2 1.3.6.1.4.1.20916.1.9.1.6.2
The label for switch sensor 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

switch-sen3 1.3.6.1.4.1.20916.1.9.1.7.1
The reading for switch sensor 3 (0 = OPEN, 1 = CLOSED).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

switch-sen3-2 1.3.6.1.4.1.20916.1.9.1.7.2
The label for switch sensor 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

switch-sen4 1.3.6.1.4.1.20916.1.9.1.8.1
The reading for switch sensor 4 (0 = OPEN, 1 = CLOSED).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

switch-sen4-2 1.3.6.1.4.1.20916.1.9.1.8.2
The label for switch sensor 4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

alarmmessage 1.3.6.1.4.1.20916.1.9.3.1
Last Alarm Message
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lightTower-RE 1.3.6.1.4.1.20916.1.9.2.1
The status of the red LED on the Light Tower.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

lightTower-OR 1.3.6.1.4.1.20916.1.9.2.2
The status of the orange LED on the Light Tower.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

lightTower-GR 1.3.6.1.4.1.20916.1.9.2.3
The status of the green LED on the Light Tower.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

lightTower-WH 1.3.6.1.4.1.20916.1.9.2.4
The status of the white LED on the Light Tower.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

lightTower-BL 1.3.6.1.4.1.20916.1.9.2.5
The status of the blue LED on the Light Tower.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

lightTower-A1 1.3.6.1.4.1.20916.1.9.2.6
The status of the 1st audio alarm on the Light Tower.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

lightTower-A2 1.3.6.1.4.1.20916.1.9.2.7
The status of the 2nd audio alarm on the Light Tower.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

lightTower-RL 1.3.6.1.4.1.20916.1.9.2.8
The status of the LTA's on-board relay output
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

tempalarm1-12E 1
A tempalarm1 trap signifies that the current temperature on external sensor 1 is outside the defined high or low threshold.
TRAP-TYPE    

room-alert-12E-snmp-trap 2
A room-alert-12E-snmp-trap indicates that an alarm condition has occurred on the sensor inidcated by the alarmMessage variable.
TRAP-TYPE    

tempalarm2-12E 3
A tempalarm2 trap signifies that the current temperature on external sensor 2 is outside the defined high or low threshold.
TRAP-TYPE    

tempclear2-12E 4
A tempclear2 trap signifies that the current temperature on external sensor 2 has returned to a normal condition and is within the defined high or low threshold.
TRAP-TYPE    

tempalarm3-12E 5
A tempalarm3 trap signifies that the current temperature on external sensor 3 is outside the defined high or low threshold.
TRAP-TYPE    

tempclear3-12E 6
A tempclear3 trap signifies that the current temperature on external sensor 3 has returned to a normal condition and is within the defined high or low threshold.
TRAP-TYPE    

humidityalarm1-12E 7
A humidityalarm1 trap signifies that the current humidity on external sensor 1 is outside the defined high or low threshold.
TRAP-TYPE    

humidityclear1-12E 8
A humidityclear1 trap signifies that the current humidity on external sensor 1 has returned to a normal condition and is within the defined high or low threshold.
TRAP-TYPE    

humidityalarm2-12E 9
A humidityalarm2 trap signifies that the current humidity on external sensor 2 is outside the defined high or low threshold.
TRAP-TYPE    

humidityclear2-12E 10
A humidityclear2 trap signifies that the current humidity on external sensor 2 has returned to a normal condition and is within the defined high or low threshold.
TRAP-TYPE    

humidityalarm3-12E 11
A humidityalarm3 trap signifies that the current humidity on external sensor 3 is outside the defined high or low threshold.
TRAP-TYPE    

humidityclear3-12E 12
A humidityclear3 trap signifies that the current humidity on external sensor 3 has returned to a normal condition and is within the defined high or low threshold.
TRAP-TYPE    

switchalarm1-12E 13
A switchalarm1 trap signifies that switch sensor 1 is in an alarm state.
TRAP-TYPE    

switchclear1-12E 14
A switchclear1 trap signifies that the switch sensor 1 has returned to a normal state.
TRAP-TYPE    

switchalarm2-12E 15
A switchalarm2 trap signifies that switch sensor 2 is in an alarm state.
TRAP-TYPE    

switchclear2-12E 16
A switchclear2 trap signifies that the switch sensor 2 has returned to a normal state.
TRAP-TYPE    

switchalarm3-12E 17
A switchalarm3 trap signifies that switch sensor 3 is in an alarm state.
TRAP-TYPE    

switchclear3-12E 18
A switchclear3 trap signifies that the switch sensor 3 has returned to a normal state.
TRAP-TYPE    

switchalarm4-12E 19
A switchalarm4 trap signifies that switch sensor 4 is in an alarm state.
TRAP-TYPE    

switchclear4-12E 20
A switchclear4 trap signifies that the switch sensor 4 has returned to a normal state.
TRAP-TYPE