ROOMALERT26W-MIB
File:
ROOMALERT26W-MIB.mib (117777 bytes)
Imported modules
Imported symbols
Defined Values
| avtech |
1.3.6.1.4.1.20916 |
| OBJECT IDENTIFIER |
|
|
|
| products |
1.3.6.1.4.1.20916.1 |
| OBJECT IDENTIFIER |
|
|
|
| sensors |
1.3.6.1.4.1.20916.1.4.1 |
| OBJECT IDENTIFIER |
|
|
|
| internal |
1.3.6.1.4.1.20916.1.4.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| temperature |
1.3.6.1.4.1.20916.1.4.1.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| humidity |
1.3.6.1.4.1.20916.1.4.1.1.2 |
| OBJECT IDENTIFIER |
|
|
|
| heat-index |
1.3.6.1.4.1.20916.1.4.1.1.5 |
| OBJECT IDENTIFIER |
|
|
|
| power |
1.3.6.1.4.1.20916.1.4.1.1.3 |
| OBJECT IDENTIFIER |
|
|
|
| flood |
1.3.6.1.4.1.20916.1.4.1.1.4 |
| OBJECT IDENTIFIER |
|
|
|
| digital |
1.3.6.1.4.1.20916.1.4.1.2 |
| OBJECT IDENTIFIER |
|
|
|
| switch |
1.3.6.1.4.1.20916.1.4.1.3 |
| OBJECT IDENTIFIER |
|
|
|
| wireless |
1.3.6.1.4.1.20916.1.4.1.4 |
| OBJECT IDENTIFIER |
|
|
|
| wish-1 |
1.3.6.1.4.1.20916.1.4.1.4.1 |
| OBJECT IDENTIFIER |
|
|
|
| wish-2 |
1.3.6.1.4.1.20916.1.4.1.4.2 |
| OBJECT IDENTIFIER |
|
|
|
| wish-3 |
1.3.6.1.4.1.20916.1.4.1.4.3 |
| OBJECT IDENTIFIER |
|
|
|
| wish-4 |
1.3.6.1.4.1.20916.1.4.1.4.4 |
| OBJECT IDENTIFIER |
|
|
|
| wish-5 |
1.3.6.1.4.1.20916.1.4.1.4.5 |
| OBJECT IDENTIFIER |
|
|
|
| wish-6 |
1.3.6.1.4.1.20916.1.4.1.4.6 |
| OBJECT IDENTIFIER |
|
|
|
| wish-7 |
1.3.6.1.4.1.20916.1.4.1.4.7 |
| OBJECT IDENTIFIER |
|
|
|
| wish-8 |
1.3.6.1.4.1.20916.1.4.1.4.8 |
| OBJECT IDENTIFIER |
|
|
|
| wish-9 |
1.3.6.1.4.1.20916.1.4.1.4.9 |
| OBJECT IDENTIFIER |
|
|
|
| wish-10 |
1.3.6.1.4.1.20916.1.4.1.4.10 |
| OBJECT IDENTIFIER |
|
|
|
| wish-11 |
1.3.6.1.4.1.20916.1.4.1.4.11 |
| OBJECT IDENTIFIER |
|
|
|
| wish-12 |
1.3.6.1.4.1.20916.1.4.1.4.12 |
| OBJECT IDENTIFIER |
|
|
|
| wish-13 |
1.3.6.1.4.1.20916.1.4.1.4.13 |
| OBJECT IDENTIFIER |
|
|
|
| wish-14 |
1.3.6.1.4.1.20916.1.4.1.4.14 |
| OBJECT IDENTIFIER |
|
|
|
| wish-15 |
1.3.6.1.4.1.20916.1.4.1.4.15 |
| OBJECT IDENTIFIER |
|
|
|
| traps |
1.3.6.1.4.1.20916.1.4.2 |
| OBJECT IDENTIFIER |
|
|
|
| internal-tempf |
1.3.6.1.4.1.20916.1.4.1.1.1.1 |
| The internal temperature reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| internal-tempc |
1.3.6.1.4.1.20916.1.4.1.1.1.2 |
| The internal temperature reading in Celsius. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| internal-humidity |
1.3.6.1.4.1.20916.1.4.1.1.2.1 |
| The internal relative humidity reading in %RH. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| internal-heat-index |
1.3.6.1.4.1.20916.1.4.1.1.5.1 |
| The internal heat index reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| internal-heat-indexC |
1.3.6.1.4.1.20916.1.4.1.1.5.2 |
| The internal heat index reading in Celsius. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| internal-power |
1.3.6.1.4.1.20916.1.4.1.1.3.1 |
| The current status of the Room Alert 26E/W power supply. A '0' indicates the unit is running on AC/Utility power. A '1' indicates the unit is running on battery backup power. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| flood-detected |
1.3.6.1.4.1.20916.1.4.1.1.4.1 |
| The current status of the internal flood sensor. A '0' indicates that no water is currently detected. A '1' indicates the unit has detected water somewhere on the connected sensor cable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| cable-fault |
1.3.6.1.4.1.20916.1.4.1.1.4.2 |
| The current status of the flood sensor cable. A '0' indicates the flood cable is connected and functioning properly. A '1' indicates the flood cable is not connected has a malfunction. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| digital-sen1-1 |
1.3.6.1.4.1.20916.1.4.1.2.1.1 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen1-2 |
1.3.6.1.4.1.20916.1.4.1.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen1-3 |
1.3.6.1.4.1.20916.1.4.1.2.1.3 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen1-4 |
1.3.6.1.4.1.20916.1.4.1.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen1-5 |
1.3.6.1.4.1.20916.1.4.1.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen2-1 |
1.3.6.1.4.1.20916.1.4.1.2.2.1 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen2-2 |
1.3.6.1.4.1.20916.1.4.1.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen2-3 |
1.3.6.1.4.1.20916.1.4.1.2.2.3 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen2-4 |
1.3.6.1.4.1.20916.1.4.1.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen3-1 |
1.3.6.1.4.1.20916.1.4.1.2.3.1 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen3-2 |
1.3.6.1.4.1.20916.1.4.1.2.3.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen3-3 |
1.3.6.1.4.1.20916.1.4.1.2.3.3 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen3-4 |
1.3.6.1.4.1.20916.1.4.1.2.3.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen4-1 |
1.3.6.1.4.1.20916.1.4.1.2.4.1 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen4-2 |
1.3.6.1.4.1.20916.1.4.1.2.4.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen4-3 |
1.3.6.1.4.1.20916.1.4.1.2.4.3 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen4-4 |
1.3.6.1.4.1.20916.1.4.1.2.4.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen5-1 |
1.3.6.1.4.1.20916.1.4.1.2.5.1 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen5-2 |
1.3.6.1.4.1.20916.1.4.1.2.5.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen5-3 |
1.3.6.1.4.1.20916.1.4.1.2.5.3 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen5-4 |
1.3.6.1.4.1.20916.1.4.1.2.5.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen6-1 |
1.3.6.1.4.1.20916.1.4.1.2.6.1 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen6-2 |
1.3.6.1.4.1.20916.1.4.1.2.6.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen6-3 |
1.3.6.1.4.1.20916.1.4.1.2.6.3 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| digital-sen6-4 |
1.3.6.1.4.1.20916.1.4.1.2.6.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| switch-sen1 |
1.3.6.1.4.1.20916.1.4.1.3.1 |
| The reading for switch sensor 1 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen2 |
1.3.6.1.4.1.20916.1.4.1.3.2 |
| The reading for switch sensor 2 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen3 |
1.3.6.1.4.1.20916.1.4.1.3.3 |
| The reading for switch sensor 3 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen4 |
1.3.6.1.4.1.20916.1.4.1.3.4 |
| The reading for switch sensor 4 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen5 |
1.3.6.1.4.1.20916.1.4.1.3.5 |
| The reading for switch sensor 5 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen6 |
1.3.6.1.4.1.20916.1.4.1.3.6 |
| The reading for switch sensor 6 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen7 |
1.3.6.1.4.1.20916.1.4.1.3.7 |
| The reading for switch sensor 7 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen8 |
1.3.6.1.4.1.20916.1.4.1.3.8 |
| The reading for switch sensor 8 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen9 |
1.3.6.1.4.1.20916.1.4.1.3.9 |
| The reading for switch sensor 9 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen10 |
1.3.6.1.4.1.20916.1.4.1.3.10 |
| The reading for switch sensor 10 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen11 |
1.3.6.1.4.1.20916.1.4.1.3.11 |
| The reading for switch sensor 11 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen12 |
1.3.6.1.4.1.20916.1.4.1.3.12 |
| The reading for switch sensor 12 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen13 |
1.3.6.1.4.1.20916.1.4.1.3.13 |
| The reading for switch sensor 13 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen14 |
1.3.6.1.4.1.20916.1.4.1.3.14 |
| The reading for switch sensor 14 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen15 |
1.3.6.1.4.1.20916.1.4.1.3.15 |
| The reading for switch sensor 15 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| switch-sen16 |
1.3.6.1.4.1.20916.1.4.1.3.16 |
| The reading for switch sensor 16 (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-1-enabled |
1.3.6.1.4.1.20916.1.4.1.4.1.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-1-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.1.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-1-updates |
1.3.6.1.4.1.20916.1.4.1.4.1.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.1.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.1.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.1.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-1-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.1.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-2-enabled |
1.3.6.1.4.1.20916.1.4.1.4.2.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-2-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.2.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-2-updates |
1.3.6.1.4.1.20916.1.4.1.4.2.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.2.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.2.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.2.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-2-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.2.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-3-enabled |
1.3.6.1.4.1.20916.1.4.1.4.3.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-3-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.3.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-3-updates |
1.3.6.1.4.1.20916.1.4.1.4.3.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.3.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.3.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.3.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-3-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.3.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-4-enabled |
1.3.6.1.4.1.20916.1.4.1.4.4.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-4-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.4.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-4-updates |
1.3.6.1.4.1.20916.1.4.1.4.4.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.4.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.4.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.4.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-4-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.4.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-5-enabled |
1.3.6.1.4.1.20916.1.4.1.4.5.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-5-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.5.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-5-updates |
1.3.6.1.4.1.20916.1.4.1.4.5.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.5.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.5.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.5.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-5-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.5.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-6-enabled |
1.3.6.1.4.1.20916.1.4.1.4.6.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-6-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.6.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-6-updates |
1.3.6.1.4.1.20916.1.4.1.4.6.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.6.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.6.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.6.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-6-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.6.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-7-enabled |
1.3.6.1.4.1.20916.1.4.1.4.7.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-7-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.7.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-7-updates |
1.3.6.1.4.1.20916.1.4.1.4.7.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.7.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.7.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.7.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-7-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.7.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-8-enabled |
1.3.6.1.4.1.20916.1.4.1.4.8.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-8-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.8.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-8-updates |
1.3.6.1.4.1.20916.1.4.1.4.8.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.8.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.8.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.8.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-8-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.8.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-9-enabled |
1.3.6.1.4.1.20916.1.4.1.4.9.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-9-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.9.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-9-updates |
1.3.6.1.4.1.20916.1.4.1.4.9.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.9.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.9.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.9.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-9-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.9.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-10-enabled |
1.3.6.1.4.1.20916.1.4.1.4.10.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-10-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.10.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-10-updates |
1.3.6.1.4.1.20916.1.4.1.4.10.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.10.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.10.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.10.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-10-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.10.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-11-enabled |
1.3.6.1.4.1.20916.1.4.1.4.11.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-11-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.11.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-11-updates |
1.3.6.1.4.1.20916.1.4.1.4.11.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.11.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.11.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.11.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-11-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.11.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-12-enabled |
1.3.6.1.4.1.20916.1.4.1.4.12.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-12-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.12.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-12-updates |
1.3.6.1.4.1.20916.1.4.1.4.12.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.12.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.12.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.12.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-12-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.12.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-13-enabled |
1.3.6.1.4.1.20916.1.4.1.4.13.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-13-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.13.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-13-updates |
1.3.6.1.4.1.20916.1.4.1.4.13.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.13.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.13.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.13.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-13-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.13.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-14-enabled |
1.3.6.1.4.1.20916.1.4.1.4.14.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-14-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.14.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-14-updates |
1.3.6.1.4.1.20916.1.4.1.4.14.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.14.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.14.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.14.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-14-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.14.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-15-enabled |
1.3.6.1.4.1.20916.1.4.1.4.15.1 |
| The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| wish-15-serial-num |
1.3.6.1.4.1.20916.1.4.1.4.15.2 |
| The unique serial number for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wish-15-updates |
1.3.6.1.4.1.20916.1.4.1.4.15.3 |
| The current update interval for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-battery-voltage |
1.3.6.1.4.1.20916.1.4.1.4.15.4.1.1 |
| The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-internal-tempc |
1.3.6.1.4.1.20916.1.4.1.4.15.4.1.2 |
| The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-internal-tempf |
1.3.6.1.4.1.20916.1.4.1.4.15.4.1.3 |
| The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-1-type |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.1.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-1-val1 |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.1.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-1-val2 |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.1.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-1-val3 |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.1.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-1-val4 |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.1.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-1-val5 |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.1.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-2-type |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.2.1 |
| The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-2-val1 |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.2.2 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-2-val2 |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.2.3 |
| If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-2-val3 |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.2.4 |
| If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-2-val4 |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.2.5 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-2-val5 |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.2.6 |
| If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| wish-15-external-switch |
1.3.6.1.4.1.20916.1.4.1.4.15.4.2.3 |
| The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| alarmmessage |
1.3.6.1.4.1.20916.1.4.2.1 |
| Last Alarm Message |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| tempalarm1-26w |
1 |
| A tempalarm1 trap signifies that the current
temperature on external sensor 1 is outside the
defined high or low threshold. |
| TRAP-TYPE |
|
|
|
| room-alert-26w-snmp-trap |
2 |
| A room-alert-26w-snmp-trap indicates that an alarm
condition has occurred on the sensor inidcated
by the alarmMessage variable. |
| TRAP-TYPE |
|
|
|
| tempalarm2-26w |
3 |
| A tempalarm2 trap signifies that the current
temperature on external sensor 2 is outside the
defined high or low threshold. |
| TRAP-TYPE |
|
|
|
| tempclear2-26w |
4 |
| A tempclear2 trap signifies that the current
temperature on external sensor 2 has returned to
a normal condition and is within the defined
high or low threshold. |
| TRAP-TYPE |
|
|
|
| tempalarm3-26w |
5 |
| A tempalarm3 trap signifies that the current
temperature on external sensor 3 is outside the
defined high or low threshold. |
| TRAP-TYPE |
|
|
|
| tempclear3-26w |
6 |
| A tempclear3 trap signifies that the current
temperature on external sensor 3 has returned to
a normal condition and is within the defined
high or low threshold. |
| TRAP-TYPE |
|
|
|
| humidityalarm1-26w |
7 |
| A humidityalarm1 trap signifies that the current
humidity on external sensor 1 is outside the
defined high or low threshold. |
| TRAP-TYPE |
|
|
|
| humidityclear1-26w |
8 |
| A humidityclear1 trap signifies that the current
humidity on external sensor 1 has returned to
a normal condition and is within the defined
high or low threshold. |
| TRAP-TYPE |
|
|
|
| humidityalarm2-26w |
9 |
| A humidityalarm2 trap signifies that the current
humidity on external sensor 2 is outside the
defined high or low threshold. |
| TRAP-TYPE |
|
|
|
| humidityclear2-26w |
10 |
| A humidityclear2 trap signifies that the current
humidity on external sensor 2 has returned to
a normal condition and is within the defined
high or low threshold. |
| TRAP-TYPE |
|
|
|
| humidityalarm3-26w |
11 |
| A humidityalarm3 trap signifies that the current
humidity on external sensor 3 is outside the
defined high or low threshold. |
| TRAP-TYPE |
|
|
|
| humidityclear3-26w |
12 |
| A humidityclear3 trap signifies that the current
humidity on external sensor 3 has returned to
a normal condition and is within the defined
high or low threshold. |
| TRAP-TYPE |
|
|
|
| switchalarm1-26w |
13 |
| A switchalarm1 trap signifies that switch sensor 1
is in an alarm state. |
| TRAP-TYPE |
|
|
|
| switchclear1-26w |
14 |
| A switchclear1 trap signifies that the switch sensor 1
has returned to a normal state. |
| TRAP-TYPE |
|
|
|
| switchalarm2-26w |
15 |
| A switchalarm2 trap signifies that switch sensor 2
is in an alarm state. |
| TRAP-TYPE |
|
|
|
| switchclear2-26w |
16 |
| A switchclear2 trap signifies that the switch sensor 2
has returned to a normal state. |
| TRAP-TYPE |
|
|
|
| switchalarm3-26w |
17 |
| A switchalarm3 trap signifies that switch sensor 3
is in an alarm state. |
| TRAP-TYPE |
|
|
|
| switchclear3-26w |
18 |
| A switchclear3 trap signifies that the switch sensor 3
has returned to a normal state. |
| TRAP-TYPE |
|
|
|
| switchalarm4-26w |
19 |
| A switchalarm4 trap signifies that switch sensor 4
is in an alarm state. |
| TRAP-TYPE |
|
|
|
| switchclear4-26w |
20 |
| A switchclear4 trap signifies that the switch sensor 4
has returned to a normal state. |
| TRAP-TYPE |
|
|
|
| switchalarm5-26w |
21 |
| A switchalarm5 trap signifies that switch sensor 5
is in an alarm state. |
| TRAP-TYPE |
|
|
|
| switchclear5-26w |
22 |
| A switchclear5 trap signifies that the switch sensor 5
has returned to a normal state. |
| TRAP-TYPE |
|
|
|
| switchalarm6-26w |
23 |
| A switchalarm6 trap signifies that switch sensor 6
is in an alarm state. |
| TRAP-TYPE |
|
|
|
| switchclear6-26w |
24 |
| A switchclear6 trap signifies that the switch sensor 6
has returned to a normal state. |
| TRAP-TYPE |
|
|
|
| switchalarm7-26w |
25 |
| A switchalarm7 trap signifies that switch sensor 7
is in an alarm state. |
| TRAP-TYPE |
|
|
|
| switchclear7-26w |
26 |
| A switchclear7 trap signifies that the switch sensor 7
has returned to a normal state. |
| TRAP-TYPE |
|
|
|
| switchalarm8-26w |
27 |
| A switchalarm8 trap signifies that switch sensor 8
is in an alarm state. |
| TRAP-TYPE |
|
|
|
| switchclear8-26w |
28 |
| A switchclear8 trap signifies that the switch sensor 8
has returned to a normal state. |
| TRAP-TYPE |
|
|
|