SAF-MPMUX-MIB
File:
SAF-MPMUX-MIB.mib (73640 bytes)
Imported modules
Imported symbols
Defined Values
| saf |
1.3.6.1.4.1.7571 |
| OBJECT IDENTIFIER |
|
|
|
| tehnika |
1.3.6.1.4.1.7571.100 |
| OBJECT IDENTIFIER |
|
|
|
| cfm22 |
1.3.6.1.4.1.7571.100.1.1.2 |
| OBJECT IDENTIFIER |
|
|
|
| mpmux |
1.3.6.1.4.1.7571.100.1.1.2.22 |
| OBJECT IDENTIFIER |
|
|
|
| terminal |
1.3.6.1.4.1.7571.100.1.1.2.22.1 |
| OBJECT IDENTIFIER |
|
|
|
| baseband |
1.3.6.1.4.1.7571.100.1.1.2.22.2 |
| OBJECT IDENTIFIER |
|
|
|
| radio1 |
1.3.6.1.4.1.7571.100.1.1.2.22.3 |
| OBJECT IDENTIFIER |
|
|
|
| radio2 |
1.3.6.1.4.1.7571.100.1.1.2.22.4 |
| OBJECT IDENTIFIER |
|
|
|
| switchCtrl |
1.3.6.1.4.1.7571.100.1.1.2.22.5 |
| OBJECT IDENTIFIER |
|
|
|
| modules |
1.3.6.1.4.1.7571.100.1.1.2.22.6 |
| OBJECT IDENTIFIER |
|
|
|
| m1 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1 |
| OBJECT IDENTIFIER |
|
|
|
| m2 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2 |
| OBJECT IDENTIFIER |
|
|
|
| m3 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3 |
| OBJECT IDENTIFIER |
|
|
|
| m4 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4 |
| OBJECT IDENTIFIER |
|
|
|
| termProduct |
1.3.6.1.4.1.7571.100.1.1.2.22.1.1 |
| Textual name of the model. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| termDescription |
1.3.6.1.4.1.7571.100.1.1.2.22.1.2 |
| Textual description of the model. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| termLocation |
1.3.6.1.4.1.7571.100.1.1.2.22.1.3 |
| Textual description of location (same as PROMT>). |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| termVersion |
1.3.6.1.4.1.7571.100.1.1.2.22.1.4 |
| Textual version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| termOperation |
1.3.6.1.4.1.7571.100.1.1.2.22.1.5 |
| System operation. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), booting(1), ok(2), testing(3), error(4) |
|
| termIduTemperature |
1.3.6.1.4.1.7571.100.1.1.2.22.1.6 |
| Integer variable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-128..127 |
|
| termFrameErrors |
1.3.6.1.4.1.7571.100.1.1.2.22.1.10 |
| Integer variable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| writeConfig |
1.3.6.1.4.1.7571.100.1.1.2.22.1.11 |
| Write Config |
| Status: mandatory |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| restartCPU |
1.3.6.1.4.1.7571.100.1.1.2.22.1.12 |
| Restart CPU |
| Status: mandatory |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| serialNumber |
1.3.6.1.4.1.7571.100.1.1.2.22.1.13 |
| Serial number |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| termRf1CablePowerStatus |
1.3.6.1.4.1.7571.100.1.1.2.22.1.14 |
| Cable status from ODU1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), ok(1), short(2), error(3), power-off(4) |
|
| termRf2CablePowerStatus |
1.3.6.1.4.1.7571.100.1.1.2.22.1.15 |
| Cable status from ODU2 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), ok(1), short(2), error(3), power-off(4) |
|
| power3V3PS1 |
1.3.6.1.4.1.7571.100.1.1.2.22.1.16 |
| IDU power voltage +3.3V |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| power5VPS1 |
1.3.6.1.4.1.7571.100.1.1.2.22.1.17 |
| IDU power voltage +5V |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| powerM5VPS1 |
1.3.6.1.4.1.7571.100.1.1.2.22.1.18 |
| IDU power voltage -5V |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| powerODU1V |
1.3.6.1.4.1.7571.100.1.1.2.22.1.19 |
| ODU power voltage (V) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| powerODU1I |
1.3.6.1.4.1.7571.100.1.1.2.22.1.20 |
| ODU power current (A) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| powerODU1W |
1.3.6.1.4.1.7571.100.1.1.2.22.1.21 |
| ODU power (W) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| power3V3PS2 |
1.3.6.1.4.1.7571.100.1.1.2.22.1.22 |
| IDU power voltage +3.3V |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| power5VPS2 |
1.3.6.1.4.1.7571.100.1.1.2.22.1.23 |
| IDU power voltage +5V |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| powerM5VPS2 |
1.3.6.1.4.1.7571.100.1.1.2.22.1.24 |
| IDU power voltage -5V |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| powerODU2V |
1.3.6.1.4.1.7571.100.1.1.2.22.1.25 |
| ODU power voltage (V) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| powerODU2I |
1.3.6.1.4.1.7571.100.1.1.2.22.1.26 |
| ODU power current (A) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| powerODU2W |
1.3.6.1.4.1.7571.100.1.1.2.22.1.27 |
| ODU power (W) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| cpuUsage |
1.3.6.1.4.1.7571.100.1.1.2.22.1.28 |
| CPU usage [%] |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| termBFrameErr |
1.3.6.1.4.1.7571.100.1.1.2.22.1.29 |
| Background block errors |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| termStatCountTime |
1.3.6.1.4.1.7571.100.1.1.2.22.1.30 |
| Stat. count. time |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| termErroredSecond |
1.3.6.1.4.1.7571.100.1.1.2.22.1.31 |
| Err. seconds |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| termSyncLostTime |
1.3.6.1.4.1.7571.100.1.1.2.22.1.33 |
| Sync lost time |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| termAvailableTime |
1.3.6.1.4.1.7571.100.1.1.2.22.1.34 |
| Available time |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| termUnAvailableTime |
1.3.6.1.4.1.7571.100.1.1.2.22.1.35 |
| Unavailable time |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| termBer |
1.3.6.1.4.1.7571.100.1.1.2.22.1.36 |
| Textual representation of BER |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| berAlarm |
1.3.6.1.4.1.7571.100.1.1.2.22.1.37 |
| The BER alarm |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| remoteAlarm |
1.3.6.1.4.1.7571.100.1.1.2.22.1.38 |
| The Remote alarm |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| systemAlarm |
1.3.6.1.4.1.7571.100.1.1.2.22.1.39 |
| The SYSTEM alarm |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| outputABCD |
1.3.6.1.4.1.7571.100.1.1.2.22.1.41 |
| The Output relays |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| termBerInPwOf10 |
1.3.6.1.4.1.7571.100.1.1.2.22.1.42 |
| The Power of 10 part of termBer |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| outputMaskABCD |
1.3.6.1.4.1.7571.100.1.1.2.22.1.43 |
| The Output relay bit mask.
If the correspondig bit is
0 - the output bit can be changed manualy
1 - the output bit changes automaticaly (according to sync lost, radio allarm etc.) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| bbVersion |
1.3.6.1.4.1.7571.100.1.1.2.22.2.1 |
| Textual version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| bbOperation |
1.3.6.1.4.1.7571.100.1.1.2.22.2.2 |
| System operation. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), booting(1), ok(2), testing(3), loopback(4), illegalSpeed(5), error(6) |
|
| bbLinkCapacity |
1.3.6.1.4.1.7571.100.1.1.2.22.2.3 |
| Integer variable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| bbLoopback |
1.3.6.1.4.1.7571.100.1.1.2.22.2.5 |
| Loopback Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), digital(1), analog(2) |
|
| bbSyncLostAlarm |
1.3.6.1.4.1.7571.100.1.1.2.22.2.6 |
| The SYncLostAlarm. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), on(1) |
|
| rf1Operation |
1.3.6.1.4.1.7571.100.1.1.2.22.3.1 |
| Radio operation. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), booting(1), ok(2), testing(3), error(4), noDataFromODU(5) |
|
| rf1Alarm |
1.3.6.1.4.1.7571.100.1.1.2.22.3.2 |
| The RadioAlarm. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), on(1) |
|
| rf1Version |
1.3.6.1.4.1.7571.100.1.1.2.22.3.3 |
| Textual version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| rf1Side |
1.3.6.1.4.1.7571.100.1.1.2.22.3.4 |
| The Side. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| rf1Channel |
1.3.6.1.4.1.7571.100.1.1.2.22.3.5 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1TxFrequency |
1.3.6.1.4.1.7571.100.1.1.2.22.3.6 |
| Textual version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| rf1RxFrequency |
1.3.6.1.4.1.7571.100.1.1.2.22.3.7 |
| Textual version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| rf1TxPower |
1.3.6.1.4.1.7571.100.1.1.2.22.3.8 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1RxState |
1.3.6.1.4.1.7571.100.1.1.2.22.3.9 |
| The rx State. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), ok(1), error(2), loopback(3) |
|
| rf1RxLevel |
1.3.6.1.4.1.7571.100.1.1.2.22.3.10 |
| Integer variable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1CableAttenuation |
1.3.6.1.4.1.7571.100.1.1.2.22.3.11 |
| Integer variable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1TxOut |
1.3.6.1.4.1.7571.100.1.1.2.22.3.12 |
| The Tx out. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
error(0), ok(1), off(2) |
|
| rf1TxPLL |
1.3.6.1.4.1.7571.100.1.1.2.22.3.13 |
| The txPLL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
error(0), ok(1) |
|
| rf1RxPLL |
1.3.6.1.4.1.7571.100.1.1.2.22.3.14 |
| The rxPLL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
error(0), ok(1) |
|
| rf1OduTemperature |
1.3.6.1.4.1.7571.100.1.1.2.22.3.15 |
| Integer variable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1OduHumidity |
1.3.6.1.4.1.7571.100.1.1.2.22.3.16 |
| The ODU Humidity. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| rf1Loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.3.17 |
| Loopback Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), on(1) |
|
| rf1RxAlarmLevel |
1.3.6.1.4.1.7571.100.1.1.2.22.3.18 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1txfstart |
1.3.6.1.4.1.7571.100.1.1.2.22.3.19 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1duplexshift |
1.3.6.1.4.1.7571.100.1.1.2.22.3.20 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1chstep |
1.3.6.1.4.1.7571.100.1.1.2.22.3.21 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1chstart |
1.3.6.1.4.1.7571.100.1.1.2.22.3.22 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1chend |
1.3.6.1.4.1.7571.100.1.1.2.22.3.23 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1txpwmin |
1.3.6.1.4.1.7571.100.1.1.2.22.3.24 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1txpwmax |
1.3.6.1.4.1.7571.100.1.1.2.22.3.25 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf1txpwstep |
1.3.6.1.4.1.7571.100.1.1.2.22.3.26 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2Operation |
1.3.6.1.4.1.7571.100.1.1.2.22.4.1 |
| Radio operation. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), booting(1), ok(2), testing(3), error(4), noDataFromODU(5) |
|
| rf2Alarm |
1.3.6.1.4.1.7571.100.1.1.2.22.4.2 |
| The RadioAlarm. -> rf1Alarm |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), on(1) |
|
| rf2Version |
1.3.6.1.4.1.7571.100.1.1.2.22.4.3 |
| Textual version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| rf2Side |
1.3.6.1.4.1.7571.100.1.1.2.22.4.4 |
| The Side. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| rf2Channel |
1.3.6.1.4.1.7571.100.1.1.2.22.4.5 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2TxFrequency |
1.3.6.1.4.1.7571.100.1.1.2.22.4.6 |
| Textual version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| rf2RxFrequency |
1.3.6.1.4.1.7571.100.1.1.2.22.4.7 |
| Textual version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| rf2TxPower |
1.3.6.1.4.1.7571.100.1.1.2.22.4.8 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2RxState |
1.3.6.1.4.1.7571.100.1.1.2.22.4.9 |
| The rx State. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), ok(1), error(2), loopback(3) |
|
| rf2RxLevel |
1.3.6.1.4.1.7571.100.1.1.2.22.4.10 |
| Integer variable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2CableAttenuation |
1.3.6.1.4.1.7571.100.1.1.2.22.4.11 |
| Integer variable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2TxOut |
1.3.6.1.4.1.7571.100.1.1.2.22.4.12 |
| The Tx out. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
error(0), ok(1), off(2) |
|
| rf2TxPLL |
1.3.6.1.4.1.7571.100.1.1.2.22.4.13 |
| The txPLL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
error(0), ok(1) |
|
| rf2RxPLL |
1.3.6.1.4.1.7571.100.1.1.2.22.4.14 |
| The rxPLL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
error(0), ok(1) |
|
| rf2OduTemperature |
1.3.6.1.4.1.7571.100.1.1.2.22.4.15 |
| Integer variable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2OduHumidity |
1.3.6.1.4.1.7571.100.1.1.2.22.4.16 |
| The ODU Humidity. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| rf2Loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.4.17 |
| Loopback Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), on(1) |
|
| rf2RxAlarmLevel |
1.3.6.1.4.1.7571.100.1.1.2.22.4.18 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2txfstart |
1.3.6.1.4.1.7571.100.1.1.2.22.4.19 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2duplexshift |
1.3.6.1.4.1.7571.100.1.1.2.22.4.20 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2chstep |
1.3.6.1.4.1.7571.100.1.1.2.22.4.21 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2chstart |
1.3.6.1.4.1.7571.100.1.1.2.22.4.22 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2chend |
1.3.6.1.4.1.7571.100.1.1.2.22.4.23 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2txpwmin |
1.3.6.1.4.1.7571.100.1.1.2.22.4.24 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2txpwmax |
1.3.6.1.4.1.7571.100.1.1.2.22.4.25 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rf2txpwstep |
1.3.6.1.4.1.7571.100.1.1.2.22.4.26 |
| Integer variable. |
| Status: optional |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| activeLink |
1.3.6.1.4.1.7571.100.1.1.2.22.5.1 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(0), link1(1), link2(2), error(255) |
|
| activeTx |
1.3.6.1.4.1.7571.100.1.1.2.22.5.2 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), link1(1), link2(2), both(3) |
|
| preferedLink |
1.3.6.1.4.1.7571.100.1.1.2.22.5.3 |
| Integer variable. |
| Status: optional |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(0), link1(1), link2(2), error(255) |
|
| forcedLink |
1.3.6.1.4.1.7571.100.1.1.2.22.5.4 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), link1(1), link2(2), error(255) |
|
| switchMode |
1.3.6.1.4.1.7571.100.1.1.2.22.5.5 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(0), freqDiv(1), hotStandby(2), independent(3) |
|
| odu1RxMax |
1.3.6.1.4.1.7571.100.1.1.2.22.5.6 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| odu2RxMax |
1.3.6.1.4.1.7571.100.1.1.2.22.5.7 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| odu1RxMin |
1.3.6.1.4.1.7571.100.1.1.2.22.5.8 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| odu2RxMin |
1.3.6.1.4.1.7571.100.1.1.2.22.5.9 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rxDelta |
1.3.6.1.4.1.7571.100.1.1.2.22.5.10 |
| Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rxBER |
1.3.6.1.4.1.7571.100.1.1.2.22.5.11 |
| Maximum value of allowed BER |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| switchDelay |
1.3.6.1.4.1.7571.100.1.1.2.22.5.12 |
| Delay (s) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| switchEnabledForRxBer |
1.3.6.1.4.1.7571.100.1.1.2.22.5.13 |
| Enable/disable swithing for Rx and BER |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| switchReason |
1.3.6.1.4.1.7571.100.1.1.2.22.5.14 |
| 100 - command SWITCH FORCE OFF
101 - command SWITCH FORCE 1
102 - command SWITCH FORCE 2
103 - command SWITCH ACTIVE 1
104 - command SWITCH ACTIVE 2
105 - active ODU changed from 1
to 2 because of power problems in ODU1
106 - active ODU changed from 2
to 2 because of power problems in ODU2
107 - active ODU changed from 1
to 2 because of cable problems in ODU1
108 - active ODU changed from 2
to 1 because of cable problems in ODU2
109 - active ODU changed from 1
to 2 because of SyncLoss problems when active ODU1
110 - active ODU changed from 2
to 1 because of SyncLoss problems when active ODU2
111 - active ODU changed from 1
to 2 because of RAI problems when active ODU1
112 - active ODU changed from 2
to 1 because of RAI problems when active ODU2
113 - active ODU changed from 1
to 2 because of RXLEV problems in ODU1
114 - active ODU changed from 2
to 1 because of RXLEV problems in ODU2
115 - active ODU changed from 1
to 2 because of BER problems when active ODU1
116 - active ODU changed from 2
to 1 because of BER problems when active ODU2 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m1Type |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.1 |
| The module type. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
error(0), e1x1(30), e1(33), v35(37), bridge(43), eow64(100), e3(227), t1x4(74), e1x4(78), f1bridge(241), f2bridge(242), none(255) |
|
| m1Description |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.2 |
| Textual description of the module. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| m1Version |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.3 |
| Module Textual version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| m1Speed |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.4 |
| Module data speed Integer variable Kbit. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m1Operation |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.5 |
| Module operation statuss. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), booting(1), ok(2), testing(3), loopback(4), illegalSpeed(5), error(6) |
|
| m1Rx |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.6 |
| Module Rx statuss. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), ok(1), noSignal(2), noLink(3), rxAIS(4), error(5), noData(6) |
|
| m1Tx |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.7 |
| Module Tx statuss. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), ok(1), noSignal(2), noLink(3), txAIS(4), error(5), noData(6) |
|
| m1Loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.8 |
| Module Loopback Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), on(1), analog(2) |
|
| m1TxMode |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.10 |
| Module Tx duplex mode. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), halfDuplex(1), fullDuplex(2) |
|
| m1TxClockSource |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.11 |
| Module Tx clock source. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), master(1), slave(2) |
|
| m1TxClockPhase |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.12 |
| Module Tx clock Phase. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), normal(1), inverse(2) |
|
| m1DataPolarity |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.13 |
| Module data. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), normal(1), inverse(2) |
|
| m1ChanCount |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.14 |
| Number of data channels |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m2Type |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.1 |
| The module type. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
error(0), e1x1(30), e1(33), v35(37), bridge(43), eow64(100), e3(227), t1x4(74), e1x4(78), f1bridge(241), f2bridge(242), none(255) |
|
| m2Description |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.2 |
| Textual description of the module. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| m2Version |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.3 |
| Module Textual version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| m2Speed |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.4 |
| Module data speed Integer variable Kbit. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m2Operation |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.5 |
| Module operation statuss. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), booting(1), ok(2), testing(3), loopback(4), illegalSpeed(5), error(6) |
|
| m2Rx |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.6 |
| Module Rx statuss. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), ok(1), noSignal(2), noLink(3), rxAIS(4), error(5), noData(6) |
|
| m2Tx |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.7 |
| Module Tx statuss. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), ok(1), noSignal(2), noLink(3), txAIS(4), error(5), noData(6) |
|
| m2Loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.8 |
| Loopback Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), on(1), analog(2) |
|
| m2TxMode |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.10 |
| Module Tx duplex mode. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), halfDuplex(1), fullDuplex(2) |
|
| m2TxClockSource |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.11 |
| Module Tx clock source. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), master(1), slave(2) |
|
| m2TxClockPhase |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.12 |
| Module Tx clock Phase. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), normal(1), inverse(2) |
|
| m2DataPolarity |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.13 |
| Module data. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), normal(1), inverse(2) |
|
| m2ChanCount |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.14 |
| Number of data channels |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m3Type |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.1 |
| The module type. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
error(0), e1x1(30), e1(33), v35(37), bridge(43), eow64(100), e3(227), t1x4(74), e1x4(78), f1bridge(241), f2bridge(242), none(255) |
|
| m3Description |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.2 |
| Textual description of the module. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| m3Version |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.3 |
| Module Textual version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| m3Speed |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.4 |
| Module data speed Integer variable Kbit. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m3Operation |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.5 |
| Module operation statuss. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), booting(1), ok(2), testing(3), loopback(4), illegalSpeed(5), error(6) |
|
| m3Rx |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.6 |
| Module Rx statuss. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), ok(1), noSignal(2), noLink(3), rxAIS(4), error(5), noData(6) |
|
| m3Tx |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.7 |
| Module Tx statuss. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), ok(1), noSignal(2), noLink(3), txAIS(4), error(5), noData(6) |
|
| m3Loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.8 |
| Loopback Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), on(1), analog(2) |
|
| m3TxMode |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.10 |
| Module Tx duplex mode. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), halfDuplex(1), fullDuplex(2) |
|
| m3TxClockSource |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.11 |
| Module Tx clock source. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), master(1), slave(2) |
|
| m3TxClockPhase |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.12 |
| Module Tx clock Phase. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), normal(1), inverse(2) |
|
| m3DataPolarity |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.13 |
| Module data. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), normal(1), inverse(2) |
|
| m3ChanCount |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.14 |
| Number of data channels |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m4Type |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.1 |
| The module type. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
error(0), e1x1(30), e1(33), v35(37), bridge(43), eow64(100), e3(227), t1x4(74), e1x4(78), f1bridge(241), f2bridge(242), none(255) |
|
| m4Description |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.2 |
| Textual description of the module. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| m4Version |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.3 |
| Module Textual version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| m4Speed |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.4 |
| Module data speed Integer variable Kbit. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m4Operation |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.5 |
| Module operation statuss. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), booting(1), ok(2), testing(3), loopback(4), illegalSpeed(5), error(6) |
|
| m4Rx |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.6 |
| Module Rx statuss. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), ok(1), noSignal(2), noLink(3), rxAIS(4), error(5), noData(6) |
|
| m4Tx |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.7 |
| Module Tx statuss. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), ok(1), noSignal(2), noLink(3), txAIS(4), error(5), noData(6) |
|
| m4Loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.8 |
| Loopback Integer variable. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), on(1), analog(2) |
|
| m4TxMode |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.10 |
| Module Tx duplex mode. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), halfDuplex(1), fullDuplex(2) |
|
| m4TxClockSource |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.11 |
| Module Tx clock source. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), master(1), slave(2) |
|
| m4TxClockPhase |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.12 |
| Module Tx clock Phase. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), normal(1), inverse(2) |
|
| m4DataPolarity |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.13 |
| Module data. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(0), normal(1), inverse(2) |
|
| m4ChanCount |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.14 |
| Number of data channels |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m1port1 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.21 |
| OBJECT IDENTIFIER |
|
|
|
| m1port2 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.22 |
| OBJECT IDENTIFIER |
|
|
|
| m1port3 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.23 |
| OBJECT IDENTIFIER |
|
|
|
| m1port4 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.24 |
| OBJECT IDENTIFIER |
|
|
|
| m2port1 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.21 |
| OBJECT IDENTIFIER |
|
|
|
| m2port2 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.22 |
| OBJECT IDENTIFIER |
|
|
|
| m2port3 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.23 |
| OBJECT IDENTIFIER |
|
|
|
| m2port4 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.24 |
| OBJECT IDENTIFIER |
|
|
|
| m3port1 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.21 |
| OBJECT IDENTIFIER |
|
|
|
| m3port2 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.22 |
| OBJECT IDENTIFIER |
|
|
|
| m3port3 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.23 |
| OBJECT IDENTIFIER |
|
|
|
| m3port4 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.24 |
| OBJECT IDENTIFIER |
|
|
|
| m4port1 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.21 |
| OBJECT IDENTIFIER |
|
|
|
| m4port2 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.22 |
| OBJECT IDENTIFIER |
|
|
|
| m4port3 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.23 |
| OBJECT IDENTIFIER |
|
|
|
| m4port4 |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.24 |
| OBJECT IDENTIFIER |
|
|
|
| m1p1statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.21.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m1p1connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.21.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m1p1flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.21.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m1p1priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.21.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m1p1loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.21.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m1p2statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.22.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m1p2connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.22.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m1p2flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.22.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m1p2priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.22.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m1p2loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.22.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m1p3statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.23.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m1p3connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.23.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m1p3flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.23.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m1p3priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.23.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m1p3loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.23.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m1p4statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.24.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m1p4connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.24.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m1p4flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.24.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m1p4priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.24.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m1p4loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.1.24.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m2p1statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.21.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m2p1connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.21.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m2p1flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.21.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m2p1priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.21.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m2p1loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.21.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m2p2statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.22.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m2p2connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.22.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m2p2flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.22.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m2p2priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.22.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m2p2loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.22.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m2p3statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.23.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m2p3connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.23.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m2p3flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.23.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m2p3priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.23.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m2p3loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.23.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m2p4statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.24.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m2p4connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.24.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m2p4flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.24.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m2p4priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.24.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m2p4loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.2.24.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m3p1statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.21.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m3p1connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.21.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m3p1flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.21.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m3p1priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.21.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m3p1loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.21.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m3p2statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.22.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m3p2connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.22.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m3p2flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.22.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m3p2priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.22.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m3p2loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.22.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m3p3statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.23.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m3p3connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.23.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m3p3flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.23.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m3p3priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.23.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m3p3loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.23.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m3p4statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.24.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m3p4connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.24.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m3p4flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.24.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m3p4priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.24.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m3p4loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.3.24.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m4p1statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.21.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m4p1connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.21.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m4p1flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.21.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m4p1priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.21.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m4p1loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.21.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m4p2statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.22.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m4p2connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.22.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m4p2flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.22.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m4p2priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.22.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m4p2loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.22.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m4p3statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.23.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m4p3connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.23.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m4p3flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.23.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m4p3priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.23.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m4p3loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.23.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| m4p4statbin |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.24.1 |
| Tok_String |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| m4p4connection |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.24.2 |
| Note: ds1 means E1 or T1 |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), auto(1), eth10fdx(2), eth10hdx(3), eth100fdx(4), eth100hdx(5), ds1(6) |
|
| m4p4flowcntrl |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.24.3 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| m4p4priority |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.24.4 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
low(0), high(1) |
|
| m4p4loopback |
1.3.6.1.4.1.7571.100.1.1.2.22.6.4.24.5 |
| loopback |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
off(0), analog(1), remote(2), digital(4), remoteANDdigital(6) |
|
| alarmTrap |
0 |
| SAF management Alarm trap. |
| TRAP-TYPE |
|
|
|