SCANET-MIB

File: SCANET-MIB.mib (28329 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises IpAddress TimeTicks
DisplayString OBJECT-TYPE

Defined Types

IdEntry  
SEQUENCE    
  brdNumber INTEGER
  hwId DisplayString
  fwId DisplayString

SwEntry  
SEQUENCE    
  swName DisplayString

AutAccessEntry  
SEQUENCE    
  autAccessIP IpAddress
  autAccessTime TimeTicks

IpEntry  
SEQUENCE    
  ipIndex INTEGER
  ipAddrAndMask OCTET STRING Size(8)

AutEntry  
SEQUENCE    
  autNumber INTEGER
  autIpAndAccessAndCommunity OCTET STRING
  autDelete INTEGER

TrapEntry  
SEQUENCE    
  trapNumber INTEGER
  trapIpAndCommunity OCTET STRING
  trapDelete INTEGER

SwInfoEntry  
SEQUENCE    
  swStatus INTEGER
  swName OCTET STRING
  swLoadTime TimeTicks
  swTftpIp IpAddress

Defined Values

scanet 1.3.6.1.4.1.208
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.208.1
OBJECT IDENTIFIER    

ts-2104 1.3.6.1.4.1.208.1.12
OBJECT IDENTIFIER    

cs-72xx 1.3.6.1.4.1.208.1.13
OBJECT IDENTIFIER    

cs-76xx 1.3.6.1.4.1.208.1.15
OBJECT IDENTIFIER    

cs-14xx 1.3.6.1.4.1.208.1.32
OBJECT IDENTIFIER    

ethernetSwitch 1.3.6.1.4.1.208.1.35
OBJECT IDENTIFIER    

es-1810 1.3.6.1.4.1.208.1.35.1
OBJECT IDENTIFIER    

es-1820 1.3.6.1.4.1.208.1.35.2
OBJECT IDENTIFIER    

es10t24 1.3.6.1.4.1.208.1.35.3
OBJECT IDENTIFIER    

es10t24plus 1.3.6.1.4.1.208.1.35.4
OBJECT IDENTIFIER    

es-1520 1.3.6.1.4.1.208.1.35.5
OBJECT IDENTIFIER    

es-1850 1.3.6.1.4.1.208.1.35.6
OBJECT IDENTIFIER    

es-1851 1.3.6.1.4.1.208.1.35.7
OBJECT IDENTIFIER    

es100fx 1.3.6.1.4.1.208.1.35.8
OBJECT IDENTIFIER    

cs-3300 1.3.6.1.4.1.208.1.42
OBJECT IDENTIFIER    

mfts 1.3.6.1.4.1.208.1.67
OBJECT IDENTIFIER    

cs-21xx 1.3.6.1.4.1.208.1.68
OBJECT IDENTIFIER    

ct-30xx 1.3.6.1.4.1.208.1.69
OBJECT IDENTIFIER    

in-40xx 1.3.6.1.4.1.208.1.82
OBJECT IDENTIFIER    

ct-40xx 1.3.6.1.4.1.208.1.83
OBJECT IDENTIFIER    

matchboxRouter 1.3.6.1.4.1.208.1.88
OBJECT IDENTIFIER    

mr-1010 1.3.6.1.4.1.208.1.88.1
OBJECT IDENTIFIER    

mr-1011 1.3.6.1.4.1.208.1.88.2
OBJECT IDENTIFIER    

mr-1013 1.3.6.1.4.1.208.1.88.3
OBJECT IDENTIFIER    

mr-1014 1.3.6.1.4.1.208.1.88.4
OBJECT IDENTIFIER    

mr-1050 1.3.6.1.4.1.208.1.88.5
OBJECT IDENTIFIER    

mr-1051 1.3.6.1.4.1.208.1.88.6
OBJECT IDENTIFIER    

mr-1110 1.3.6.1.4.1.208.1.88.7
OBJECT IDENTIFIER    

mr-1111 1.3.6.1.4.1.208.1.88.8
OBJECT IDENTIFIER    

mr-1113 1.3.6.1.4.1.208.1.88.9
OBJECT IDENTIFIER    

mr-1114 1.3.6.1.4.1.208.1.88.10
OBJECT IDENTIFIER    

mr-1150 1.3.6.1.4.1.208.1.88.11
OBJECT IDENTIFIER    

mr-1151 1.3.6.1.4.1.208.1.88.12
OBJECT IDENTIFIER    

mr-1055 1.3.6.1.4.1.208.1.88.13
OBJECT IDENTIFIER    

mr-1155 1.3.6.1.4.1.208.1.88.14
OBJECT IDENTIFIER    

mr-1020 1.3.6.1.4.1.208.1.88.15
OBJECT IDENTIFIER    

mr-1120 1.3.6.1.4.1.208.1.88.16
OBJECT IDENTIFIER    

mr-1023 1.3.6.1.4.1.208.1.88.17
OBJECT IDENTIFIER    

mr-1123 1.3.6.1.4.1.208.1.88.18
OBJECT IDENTIFIER    

mr-1024 1.3.6.1.4.1.208.1.88.19
OBJECT IDENTIFIER    

mr-1124 1.3.6.1.4.1.208.1.88.20
OBJECT IDENTIFIER    

mr-1040 1.3.6.1.4.1.208.1.88.21
OBJECT IDENTIFIER    

mr-1140 1.3.6.1.4.1.208.1.88.22
OBJECT IDENTIFIER    

mr-1021 1.3.6.1.4.1.208.1.88.23
OBJECT IDENTIFIER    

mr-1121 1.3.6.1.4.1.208.1.88.24
OBJECT IDENTIFIER    

er9100 1.3.6.1.4.1.208.1.88.25
OBJECT IDENTIFIER    

er9200 1.3.6.1.4.1.208.1.88.26
OBJECT IDENTIFIER    

er9300 1.3.6.1.4.1.208.1.88.27
OBJECT IDENTIFIER    

er9400 1.3.6.1.4.1.208.1.88.28
OBJECT IDENTIFIER    

mib2ext 1.3.6.1.4.1.208.2
OBJECT IDENTIFIER    

system 1.3.6.1.4.1.208.2.1
OBJECT IDENTIFIER    

ip 1.3.6.1.4.1.208.2.4
OBJECT IDENTIFIER    

snmp 1.3.6.1.4.1.208.2.11
OBJECT IDENTIFIER    

swUpdate 1.3.6.1.4.1.208.2.40
OBJECT IDENTIFIER    

scaProt 1.3.6.1.4.1.208.4
OBJECT IDENTIFIER    

reboot 1.3.6.1.4.1.208.2.1.1
Object to control actions in the device such as: resetNow(1) is reset the device immediately, reloadParm(7) is reload parameterblock from FLASH. saveParm(8) is save the parameter block to FLASH. Notice that not all products supports all values of this object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER resetNow(1), resetIdle(2), reset1hour(3), reset8hours(4), reloadTerminfo(5), reloadProfile(6), reloadParm(7), saveParm(8), reloadAnnounce(9), rebootAndLoadFlash(10), resetWarm(11), reloadDefaultKeepIP(12), reloadDefault(13)  

ram 1.3.6.1.4.1.208.2.1.2
The size of the CPU RAM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

idTable 1.3.6.1.4.1.208.2.1.3
A table containing H/W and F/W identification.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IdEntry

idEntry 1.3.6.1.4.1.208.2.1.3.1
A H/W and F/W information entry for each set of boards.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IdEntry  

brdNumber 1.3.6.1.4.1.208.2.1.3.1.1
An index identifying one or more boards.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwId 1.3.6.1.4.1.208.2.1.3.1.2
H/W identification for the board, ex 10T24.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

fwId 1.3.6.1.4.1.208.2.1.3.1.3
F/W identification for the board. ex PROM version number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

swTable 1.3.6.1.4.1.208.2.1.4
A table af S/W filenames.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwEntry

swEntry 1.3.6.1.4.1.208.2.1.4.1
A filename.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SwEntry  

swName 1.3.6.1.4.1.208.2.1.4.1.1
Filename of S/W.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

errorLogNumber 1.3.6.1.4.1.208.2.1.5
Number of entries in the error log. Setting the value zero will clear the log. Set of any other value is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

systemLogNumber 1.3.6.1.4.1.208.2.1.6
Number of entries in the system log. Setting the value zero will clear the log. Set of any other value is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

autAccessTable 1.3.6.1.4.1.208.2.1.7
Authorization Access list. A list of all IP addresses that has passed the authorization. The access can be from either SNMP, TFTP or Telnet
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AutAccessEntry

autAccessEntry 1.3.6.1.4.1.208.2.1.7.1
Authorization accept entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AutAccessEntry  

autAccessIP 1.3.6.1.4.1.208.2.1.7.1.1
IP address of the host that has successfully passed the authorization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

autAccessTime 1.3.6.1.4.1.208.2.1.7.1.2
Time of last successfully access.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

timeOfDay 1.3.6.1.4.1.208.2.1.8
The system's Time Of Day. The time is expresed in seconds since midnight (0 hour), Januar 1, 1970.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

configurationLastChanged 1.3.6.1.4.1.208.2.1.9
Time Of Day the configuration was last changed. The time is expresed in seconds since midnight (0 hour), Januar 1, 1970.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

configurationLastSaved 1.3.6.1.4.1.208.2.1.10
Time Of Day the configuration was saved to FLASH. The time is expresed in seconds since midnight (0 hour), Januar 1, 1970.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

unsavedConfiguration 1.3.6.1.4.1.208.2.1.11
Indicates if there are unsaved configuration changes to FLASH. If the value is yes(2) the configuration has been changed and can be saved by setting the object reboot to saveParm(8).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ipTable 1.3.6.1.4.1.208.2.4.1
This table is needed to set the IP address and the IP mask. Refer to the table ipAddrTable in MIB-II, for a description.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpEntry

ipEntry 1.3.6.1.4.1.208.2.4.1.1
Entry with an IP address and an IP mask.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpEntry  

ipIndex 1.3.6.1.4.1.208.2.4.1.1.1
The value of an interface indentified by ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipAddrAndMask 1.3.6.1.4.1.208.2.4.1.1.2
The IP Address and the Subnet Mask. The format of the octet string is: 4 bytes : IP Address 4 bytes : IP Subnet Mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

filter 1.3.6.1.4.1.208.2.11.1
Filter to control logging af events.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7)  

print 1.3.6.1.4.1.208.2.11.2
A general object used for SNMP-TRAPS. Notice that this object for newer products is obsolete and replaced by unique TRAP's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

cause 1.3.6.1.4.1.208.2.11.3
A general object used for SNMP-TRAPS. Notice that this object for newer products is obsolete and replaced by unique TRAP's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

solution 1.3.6.1.4.1.208.2.11.4
A general object used for SNMP-TRAPS. Notice that this object for newer products is obsolete and replaced by unique TRAP's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

autMaxEntries 1.3.6.1.4.1.208.2.11.5
Maximun number of entries in the autTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

autTable 1.3.6.1.4.1.208.2.11.6
Authorization list.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AutEntry

autEntry 1.3.6.1.4.1.208.2.11.6.1
Authorization entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AutEntry  

autNumber 1.3.6.1.4.1.208.2.11.6.1.1
A number that uniquely identifies an authorization entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

autIpAndAccessAndCommunity 1.3.6.1.4.1.208.2.11.6.1.2
This object contains the Ip address (4 byte), Access (1 byte) and Community (0 to 31 byte). If the Ip address is zero then any ip address is allowed. The Access can take the values readOnly(1) and readWrite(2). If the community string is zero length, then any value of community is allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..36)  

autDelete 1.3.6.1.4.1.208.2.11.6.1.3
The autEntry is removed when set to 1. Allways returns 0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1)  

trapMaxEntries 1.3.6.1.4.1.208.2.11.7
Maximun number of entries in the trapTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trapTable 1.3.6.1.4.1.208.2.11.8
Host Trap list.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrapEntry

trapEntry 1.3.6.1.4.1.208.2.11.8.1
Host Trap entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrapEntry  

trapNumber 1.3.6.1.4.1.208.2.11.8.1.1
A number that uniquely identifies an trap entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trapIpAndCommunity 1.3.6.1.4.1.208.2.11.8.1.2
This object contains the Ip address (4 byte) and the Community (0 to 31 byte) used in the Traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

trapDelete 1.3.6.1.4.1.208.2.11.8.1.3
The trapEntry is removed when set to 1. Allways returns 0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1)  

swInfoTable 1.3.6.1.4.1.208.2.40.1
Software information table. If the product has a dual software system the table contains two entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwInfoEntry

swInfoEntry 1.3.6.1.4.1.208.2.40.1.1
Software information entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SwInfoEntry  

swStatus 1.3.6.1.4.1.208.2.40.1.1.1
This object is only used for products with a dual software system. After loading and initiating new software the status is experimental. The software must be approved to be used after power off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unavailable(1), approved(2), experimental(3), none(4)  

swName2 1.3.6.1.4.1.208.2.40.1.1.2
The software file name (0 to 46 bytes)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..46)  

swLoadTime 1.3.6.1.4.1.208.2.40.1.1.3
The time the software was loaded and saved to FLASH.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

swTftpIp 1.3.6.1.4.1.208.2.40.1.1.4
IP address of the TFTP server from which the software was loaded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

swTftpIpAndSwName 1.3.6.1.4.1.208.2.40.2
This object contains the IP address of the TFTP server (4 bytes) and the software file name (0 to 46 bytes). This is used to initiate a software update.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..50)  

swUpdateResult 1.3.6.1.4.1.208.2.40.3
The result of software update.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noError(1), swUpdateRunning(2), errorUnknown(3), errorNoTftpServer(4), errorNoSoftware(5), errorSoftwareMismatch(6), errorMoreFlash(7), errorMoreRAM(8)