SCTE-HMS-MPEG-MIB
File:
SCTE-HMS-MPEG-MIB.mib (72157 bytes)
Imported modules
Imported symbols
Defined Types
MpegProgESEntry |
|
SEQUENCE |
|
|
|
|
mpegProgESIndex |
Unsigned32 |
|
|
mpegProgESPID |
Integer32 |
|
|
mpegProgESType |
ProgDataType |
|
|
mpegProgESCaDescr |
OCTET STRING |
|
|
mpegProgESScte35Descr |
OCTET STRING |
|
|
mpegProgESScte18Descr |
OCTET STRING |
|
MpegInsertPacketEntry |
|
SEQUENCE |
|
|
|
|
mpegInsertPacketIndex |
Unsigned32 |
|
|
mpegInsertPacketListId |
Unsigned32 |
|
|
mpegInsertPacketImmediateExecution |
TruthValue |
|
|
mpegInsertPacketStartTime |
DateAndTime |
|
|
mpegInsertPacketRepeat |
INTEGER |
|
|
mpegInsertPacketContinuousFlag |
TruthValue |
|
|
mpegInsertPacketRate |
Unsigned32 |
|
|
mpegInsertPacketDeviceIfIndex |
InterfaceIndex |
|
MpegOutputStatsEntry |
|
SEQUENCE |
|
|
|
|
mpegOutputStatsDroppedPackets |
Counter32 |
|
|
mpegOutputStatsFifoOverflow |
Counter32 |
|
|
mpegOutputStatsFifoUnderflow |
Counter32 |
|
|
mpegOutputStatsDataRate |
Unsigned32 |
|
|
mpegOutputStatsAvailableBandwidth |
Unsigned32 |
|
|
mpegOutputStatsChannelUtilization |
Integer32 |
|
|
mpegOutputStatsTotalPackets |
Counter64 |
|
MpegOutputTSEntry |
|
SEQUENCE |
|
|
|
|
mpegOutputTSIndex |
Unsigned32 |
|
|
mpegOutputTSType |
INTEGER |
|
|
mpegOutputTSConnectionType |
INTEGER |
|
|
mpegOutputTSConnection |
RowPointer |
|
|
mpegOutputTSNumPrograms |
Unsigned32 |
|
|
mpegOutputTSTSID |
Unsigned32 |
|
|
mpegOutputTSNitPid |
HePIDValue |
|
|
mpegOutputTSCaPid |
HePIDValue |
|
|
mpegOutputTSCatInsertRate |
Unsigned32 |
|
|
mpegOutputTSPatInsertRate |
Unsigned32 |
|
|
mpegOutputTSPmtInsertRate |
Unsigned32 |
|
|
mpegOutputTSStartTime |
DateAndTime |
|
MpegOutputProgEntry |
|
SEQUENCE |
|
|
|
|
mpegOutputProgIndex |
Unsigned32 |
|
|
mpegOutputProgNo |
Unsigned32 |
|
|
mpegOutputProgPmtVersion |
Unsigned32 |
|
|
mpegOutputProgPmtPid |
HePIDValue |
|
|
mpegOutputProgPcrPid |
HePIDValue |
|
|
mpegOutputProgEcmPid |
HePIDValue |
|
|
mpegOutputProgNumElems |
Unsigned32 |
|
|
mpegOutputProgNumEcms |
Unsigned32 |
|
|
mpegOutputProgCaDescr |
OCTET STRING |
|
|
mpegOutputProgScte35Descr |
OCTET STRING |
|
|
mpegOutputProgScte18Descr |
OCTET STRING |
|
MpegOutputProgElemStatsEntry |
|
SEQUENCE |
|
|
|
|
mpegOutputProgElemStatsIndex |
Unsigned32 |
|
|
mpegOutputProgElemStatsPid |
HePIDValue |
|
|
mpegOutputProgElemStatsElemType |
INTEGER |
|
|
mpegOutputProgElemStatsDataRate |
Integer32 |
|
MpegOutputUdpDestinationEntry |
|
SEQUENCE |
|
|
|
|
mpegOutputUdpDestinationIndex |
Unsigned32 |
|
|
mpegOutputUdpDestinationId |
Unsigned32 |
|
|
mpegOutputUdpDestinationIfIndex |
InterfaceIndex |
|
|
mpegOutputUdpDestinationInetAddrType |
InetAddressType |
|
|
mpegOutputUdpDestinationSrcInetAddr |
InetAddress |
|
|
mpegOutputUdpDestinationDestInetAddr |
InetAddress |
|
|
mpegOutputUdpDestinationDestPort |
InetPortNumber |
|
|
mpegOutputUdpDestinationOutputTSIndex |
Unsigned32 |
|
MpegProgramMappingEntry |
|
SEQUENCE |
|
|
|
|
mpegProgramMappingIndex |
Unsigned32 |
|
|
mpegProgramMappingOutputProgIndex |
Unsigned32 |
|
|
mpegProgramMappingOutputTSIndex |
Unsigned32 |
|
|
mpegProgramMappingInputProgIndex |
Unsigned32 |
|
|
mpegProgramMappingInputTSIndex |
Unsigned32 |
|
MpegVideoSessionEntry |
|
SEQUENCE |
|
|
|
|
mpegVideoSessionIndex |
Unsigned32 |
|
|
mpegVideoSessionPhyMappingIndex |
Unsigned32 |
|
|
mpegVideoSessionPIDRemap |
TruthValue |
|
|
mpegVideoSessionMode |
INTEGER |
|
|
mpegVideoSessionState |
INTEGER |
|
|
mpegVideoSessionProvMethod |
INTEGER |
|
|
mpegVideoSessionEncryptionType |
INTEGER |
|
|
mpegVideoSessionEncryptionInfo |
AutonomousType |
|
|
mpegVideoSessionBitRate |
Unsigned32 |
|
|
mpegVideoSessionID |
OCTET STRING |
|
|
mpegVideoSessionSelectedInput |
RowPointer |
|
|
mpegVideoSessionSelectedOutput |
RowPointer |
|
MpegVideoSessionPtrEntry |
|
SEQUENCE |
|
|
|
|
mpegVideoSessionPtrInputProgIndex |
Unsigned32 |
|
|
mpegVideoSessionPtrInputTSIndex |
Unsigned32 |
|
|
mpegVideoSessionPtrInputTSConnType |
Unsigned32 |
|
|
mpegVideoSessionPtrInputTSConnection |
Unsigned32 |
|
|
mpegVideoSessionPtrOutputProgIndex |
Unsigned32 |
|
|
mpegVideoSessionPtrOutputTSIndex |
Unsigned32 |
|
|
mpegVideoSessionPtrOutputTSConnType |
Unsigned32 |
|
|
mpegVideoSessionPtrOutputTSConnection |
Unsigned32 |
|
|
mpegVideoSessionPtrStatus |
INTEGER |
|
Defined Values
heMpegCommonMIB |
1.3.6.1.4.1.5591.1.11.5.4.1 |
This MIB module is for representing MPEG equipment present in
the headend and is supported by a SNMP agent. It defines both
the MPEG input and output MIB objects for managing
MPEG input and output transport streams, programs and elementary
streams. It provides both input and output related statistics,
as well as program mapping and video session information.
All the tables, except mpegProgramMappingTable and
mpegVideoSessionTable, capture and store the information
related to active transport streams only. Optional
MIB objects will have default values defined in this MIB file. |
MODULE-IDENTITY |
|
|
|
mpegMIBObjects |
1.3.6.1.4.1.5591.1.11.5.4.1.1 |
This branch specifies the MPEG Common MIB objects that can be common
to any device using MPEG. |
Status: current |
Access: read-create |
OBJECT-IDENTITY |
|
|
|
mpegOutputs |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2 |
This branch specifies the attributes of the output streams of
the MPEG device. |
Status: current |
Access: read-create |
OBJECT-IDENTITY |
|
|
|
mpegMIBCompliances |
1.3.6.1.4.1.5591.1.11.5.4.1.2.1 |
The different levels of compliance to the MPEG MIB. |
Status: current |
Access: read-create |
OBJECT-IDENTITY |
|
|
|
mpegMIBGroups |
1.3.6.1.4.1.5591.1.11.5.4.1.2.2 |
The MPEG MIB object groups. |
Status: current |
Access: read-create |
OBJECT-IDENTITY |
|
|
|
mpegLossOfSignalTimeout |
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.1 |
This object specifies the loss of signal timeout on any
incoming stream. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegInputTSEntry |
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1 |
Each entry specifies the attributes of a transport stream
(SPTS/MPTS). |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MpegInputTSEntry |
|
|
mpegInputProgEntry |
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1 |
Each entry specifies the parameters for each incoming
program. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MpegInputProgEntry |
|
|
mpegProgESTable |
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4 |
This table contains information about the elementary streams
in a program. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MpegProgESEntry |
|
mpegProgESEntry |
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1 |
A combination of mpegInputTSIndex, mpegInputProgIndex and
mpegProgESIndex uniquely identifies an entry in the mpegProgESTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MpegProgESEntry |
|
|
mpegProgESIndex |
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.1 |
The unique index of the elementary stream. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegProgESPID |
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.2 |
This is the PID for each transport stream packet which
carries the program element. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
mpegProgESType |
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.3 |
The type of elementary stream(video, audio, or data) of the
incoming video session received from the video server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ProgDataType |
|
|
mpegProgESCaDescr |
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.4 |
CA descriptor associated with the elementary stream. If there
is no CA descriptor for the elementary stream, then this object
has a zero-length string. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
mpegProgESScte35Descr |
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.5 |
SCTE 35 descriptor. If not supported or present, a zero-length
string is returned. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
mpegProgESScte18Descr |
1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.6 |
SCTE 18 descriptor. If not supported or present, a zero-length
string is returned. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
mpegInsertPacketTable |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1 |
This table describes packet insertion information. Typical
packets that are inserted at the RF output of a device are PSI,
PSIP, and CVCT MPEG packets. These packets have their own PID.
This table may be empty if the video device does not support
packet insertion or do not have any packet insertion
configured. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MpegInsertPacketEntry |
|
mpegInsertPacketEntry |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1 |
An entry in the Packet Management Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MpegInsertPacketEntry |
|
|
mpegInsertPacketIndex |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.1 |
Index of list of packets being inserted into all MPEG
streams. This index is unique within the SNMP agent that
may be managing multiple MPEG devices. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..65536 |
|
mpegInsertPacketListId |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.2 |
Reference number of packets being inserted into MPEG stream. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
mpegInsertPacketStartTime |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.4 |
Unix epoch start time for insertions (if Immediate Execution
is false). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DateAndTime |
|
|
mpegInsertPacketRepeat |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.5 |
Indicates whether the insert packet is one-time or
repetitive. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
repeat(1), oneTime(2) |
|
mpegInsertPacketRate |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.7 |
Rate at which packet list should be inserted. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputStatsTable |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2 |
The table specifies the diagnostic stats objects for the
outputs transport stream of an MPEG device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MpegOutputStatsEntry |
|
mpegOutputStatsEntry |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1 |
Each entry specifies the diagnostics for each output TS. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MpegOutputStatsEntry |
|
|
mpegOutputStatsDataRate |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.4 |
Data rate for the content on this output transport stream. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputStatsChannelUtilization |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.6 |
The current utilization of a channel defined as
(measured data rate / total bandwidth ) * 1000.
If not applicable, a value of -1 is returned. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-1 | 0..1000 |
|
mpegOutputStatsTotalPackets |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.7 |
The total number of packets output for this transport stream
since the start of the output stream. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
mpegOutputTSTable |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3 |
This table specifies the attributes of an outgoing transport
stream SPTS or MPTS. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MpegOutputTSEntry |
|
mpegOutputTSEntry |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1 |
Each entry specifies the attributes of an output transport
stream, SPTS or MPTS. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MpegOutputTSEntry |
|
|
mpegOutputTSIndex |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.1 |
Table index. It uniquely identifies a mpegOutputTSEntry.
This index is independent from mpegOutputTSTSID. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputTSType |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.2 |
The type of stream, e.g., SPTS or MPTS. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
spts(1), mpts(2) |
|
mpegOutputTSConnectionType |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.3 |
The type of output flow of the stream.
The value 'qam' indicates a QAM output for the stream
The value 'udp' indicates either unicast or multicast
udp destination flows for the stream. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), qam(2), udp(3) |
|
mpegOutputTSConnection |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.4 |
The reference to the instance of the output connection fpr the
output stream.
For the Connection Type 'qam' this object contains the ifIndex object
identifier of the QAM channel for the output stream.
For the Connection Type 'udp' this object contains the
pointer to the UDP Destination table being used for the output stream.
This is similar to mpegInputTSConnection - See description for details. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RowPointer |
|
|
mpegOutputTSNumPrograms |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.5 |
The number of programs in the output transport stream. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputTSTSID |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.6 |
The TSID of the output transport stream. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputTSNitPid |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.7 |
NIT PID of the outgoing transport stream. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HePIDValue |
|
|
mpegOutputTSCaPid |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.8 |
The CA PID of the outgoing transport stream. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HePIDValue |
|
|
mpegOutputTSPmtInsertRate |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.11 |
The PMT insertion rate. This is expressed in tables/second. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputTSStartTime |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.12 |
This object specifies the time the MPEG device started
transmitting the output stream, i.e., the time the entry was
added to the table.
The support of this object is optional. If not supported, this
object is default to a zero length string. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DateAndTime |
|
|
mpegOutputProgTable |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4 |
The table describing the PSI of each outgoing program. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MpegOutputProgEntry |
|
mpegOutputProgEntry |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1 |
Each entry specifies the parameters for each incoming
program. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MpegOutputProgEntry |
|
|
mpegOutputProgIndex |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.1 |
This object is the table index for output program. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputProgNo |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.2 |
This object specifies the identifier of the program present
in the transport stream of the outgoing program. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputProgPmtVersion |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.3 |
This object specifies the PMT version of the outgoing
program. The default value of 0 means output program PMT
version is not supported. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputProgEcmPid |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.6 |
This object specifies the ECM PID of the outgoing program. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HePIDValue |
|
|
mpegOutputProgNumElems |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.7 |
The number of elementary streams in the outgoing program. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputProgNumEcms |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.8 |
The number of ECMs for the outgoing program. The default value
9999 means the device does not support encryption. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputProgCaDescr |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.9 |
Conditional access descriptor is used to specify both
system-wide conditional access management information such as
EMMS and elementary stream-specific information such as ECMs.
If any elementary stream is scrambled, a CA descriptor shall be
present for the program containing that elementary stream.
This object specifies the CA descriptor for this program. If
the outgoing program does not have an associated CA descriptor,
then this object has a zero-length string. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
mpegOutputProgScte35Descr |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.10 |
SCTE 35 descriptor in the outgoing program. This object is set
to a string of zero-length if there's no SCTE 35 descriptor in
the outgoing program or not supported. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
mpegOutputProgScte18Descr |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.11 |
SCTE 18 descriptor. If not present or not supported, a
zero-length string is returned. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
mpegOutputProgElemStatsEntry |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1 |
Each entry constitutes the stats for a program associated with
a transport stream. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MpegOutputProgElemStatsEntry |
|
|
mpegOutputProgElemStatsElemType |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.3 |
The type of elementary stream (video, audio, or data) of the
program. Some devices, such as device, may choose not to report
exact type due to scalability issues, in which case, this object
shall be set to unknown. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
video(1), audio(2), data(3), scte18(4), scte35(5), unknown(6) |
|
mpegOutputUdpDestinationTable |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6 |
Specifies the UDP unicast or multicast of the
output TS this entry references.
For unicast it represents the UDP port and optionally
destination IP address of the output TS destination UDP IP flow.
for Multicast it represents the set of SSM multicast groups
of the output TS destination UDP IP flow. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MpegOutputUdpDestinationEntry |
|
mpegOutputUdpDestinationEntry |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1 |
Each entry specifies the IP UDP information of the
output TS destination. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MpegOutputUdpDestinationEntry |
|
|
mpegOutputUdpDestinationIndex |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.1 |
The unique identifier of the UDP output TS destination
information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputUdpDestinationId |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.2 |
The unique identifier of each UDP IP flow associated with the
output TS UDP destination. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegOutputUdpDestinationSrcInetAddr |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.5 |
For Multicast it represents the Source Specific Multicast
IP Address of the UDP IP flow.
For unicast UDP IP flows is either the the IP source address
of the IP flow or the all zeros address if unknown or irrelevant
for the destination output TS. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
InetAddress |
|
|
mpegOutputUdpDestinationDestInetAddr |
1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.6 |
For multicast it represents the group address of the SSM
destination output TS.
For unicast UDP IP flows is either the IP destination address
of the udp flow or the all zeros address if unknown or irrelevant
for the destination output TS. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
InetAddress |
|
|
mpegProgramMappingTable |
1.3.6.1.4.1.5591.1.11.5.4.1.1.3 |
This table describes program mappings, i.e., ties the input
destination to the output destination for every program active
in the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MpegProgramMappingEntry |
|
mpegProgramMappingEntry |
1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1 |
Each entry describes the mapping, i.e., ties input
destination to output destination for a given program. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MpegProgramMappingEntry |
|
|
mpegProgramMappingIndex |
1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.1 |
The table index uniquely identifies an entry in mpegProgramMappingTable.
This index should be unique within the same SNMP agent that may be
managing multiple MPEG devices. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegProgramMappingOutputProgIndex |
1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.2 |
This object is set to mpegOutputProgIndex of the corresponding
entry in mpegOutputProgTable for a given output program. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegProgramMappingOutputTSIndex |
1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.3 |
This object is set to mpegOutputTSIndex of the
corresponding entry in mpegOutputProgTable for a given output
program. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegVideoSessionTable |
1.3.6.1.4.1.5591.1.11.5.4.1.1.4 |
This table is used to store video session information. The
session may be of VOD, SDV or DB type. It captures logical
information about a video stream, such as source and
destination addresses, UDP port etc, and also ties it with its
direct mapping of input and output programs.
This table captures video sessions provisioned by both
session-based and table-based method. It is capable to support
N-M mapping of video programs that's required for redundant
source or video stream cloning etc. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MpegVideoSessionEntry |
|
mpegVideoSessionEntry |
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1 |
Each entry describes a logical video session. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MpegVideoSessionEntry |
|
|
mpegVideoSessionIndex |
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.1 |
The table index uniquely identifies an entry in
mpegVideoSessionTable.
This index should be unique within the same SNMP agent that
may be managing multiple MPEG devices. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegVideoSessionPhyMappingIndex |
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.2 |
This object shall be set to mpegProgramMappingIndex of the
corresponding mpegProgramMappingEntry which contains
physical mapping between the input and output program. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mpegVideoSessionPIDRemap |
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.3 |
This object value 'true' indicates that the session has PID
remapping. The value 'false' indicates that the session has no
PID remapping. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
mpegVideoSessionMode |
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.4 |
Indicates whether the transport stream is associated
with a multiplexed session or is pass-through.
For pass-through type transport streams, all elementary stream
level information in optional. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), passThrough(2), multiplexing(3) |
|
mpegVideoSessionState |
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.5 |
active means in-use, provisioned means not-in-use or active
such as video session provisioned for redundant source. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), provisioned(2) |
|
mpegVideoSessionProvMethod |
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.6 |
The type of session, e.g., in QAM table-based or session-based. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
tableBased(1), sessionBased(2), other(3) |
|
mpegVideoSessionEncryptionType |
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.7 |
Indicates the encryption algorithm of the session. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), other(2), preencrypted(3), des(4), des3(5), aes(6), dvbCsa(7), pkey(8), mediac(9), dvs042(10) |
|
mpegVideoSessionEncryptionInfo |
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.8 |
Indicates a vendor-specific reference to information
associated to the session encryption algorithm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AutonomousType |
|
|
mpegVideoSessionID |
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.10 |
The session ID associated with the stream in the case of a
session-based QAM. This is not applicable to a table-based QAM.
This ID may be used by NMS system to uniquely identify an input
program to output program mapping. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
mpegVideoSessionSelectedOutput |
1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.12 |
The reference to the entry of the output flow currently being
used in the video session. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RowPointer |
|
|
mpegVideoSessionPtrTable |
1.3.6.1.4.1.5591.1.11.5.4.1.1.5 |
This table is used to provide a quick reference of the
Program Mapping and input/output TS connection information
associated with a Video Session. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MpegVideoSessionPtrEntry |
|
mpegVideoSessionPtrEntry |
1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1 |
Each entry describes the associations with ProgramMapping and
transport stream connections. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MpegVideoSessionPtrEntry |
|
|
mpegVideoSessionPtrStatus |
1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.9 |
Indicates the status of the session.
Only active sessions need to be reported. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), closed(2) |
|
mpegSupport |
1.3.6.1.4.1.5591.1.11.5.4.1.2.1.1 |
These objects describe the support level for MPEG. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
mpegOutputGroup |
1.3.6.1.4.1.5591.1.11.5.4.1.2.2.3 |
The output objects of the MPEG device. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
mpegOutputProgElemStatsGroup |
1.3.6.1.4.1.5591.1.11.5.4.1.2.2.4 |
The stats associated with the elementary streams of an MPEG
program. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
mpegMappingsGroup |
1.3.6.1.4.1.5591.1.11.5.4.1.2.2.5 |
The group of objects describing program mappings within the
Device. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
mpegSessionsGroup |
1.3.6.1.4.1.5591.1.11.5.4.1.2.2.6 |
The group of objects describing program mappings within the
Device. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|