SERVERVIEW-DUPLEXDATAMANAGER-MIB

File: SERVERVIEW-DUPLEXDATAMANAGER-MIB.mib (58046 bytes)

Imported modules

RFC-1212 RFC1213-MIB RFC1155-SMI

Imported symbols

OBJECT-TYPE mib-2 DisplayString
Counter Gauge IpAddress
enterprises

Defined Types

FscDdmDwPiece  
SEQUENCE    
  fscDdmDwIndex INTEGER
  fscDdmDwDwPort INTEGER
  fscDdmDwDwPath INTEGER
  fscDdmDwDwTarget INTEGER
  fscDdmDwDwLun INTEGER
  fscDdmDwDwName DisplayString
  fscDdmDwDwGroupNumber INTEGER
  fscDdmDwDwPieceNumber INTEGER
  fscDdmDwDwSize INTEGER
  fscDdmDwDwRoot INTEGER
  fscDdmDwDwRecoverMode INTEGER
  fscDdmDwDwStatus INTEGER
  fscDdmDwDwReason INTEGER
  fscDdmDwDwActive INTEGER
  fscDdmDwDwRecoverProgress INTEGER
  fscDdmDwDwHidden INTEGER
  fscDdmDwDwRecent INTEGER
  fscDdmDwDwForced INTEGER
  fscDdmDwDwPieceCount INTEGER
  fscDdmDwDwPieceFound INTEGER
  fscDdmDwDwBalance INTEGER
  fscDdmDwMpGroupNumber INTEGER
  fscDdmDwScPort INTEGER
  fscDdmDwScPath INTEGER
  fscDdmDwScTarget INTEGER
  fscDdmDwScLun INTEGER
  fscDdmDwScDiskNumber INTEGER
  fscDdmDwScSize INTEGER
  fscDdmDwScSignature INTEGER
  fscDdmDwScType INTEGER
  fscDdmDwScInquiry DisplayString
  fscDdmDwScResource DisplayString
  fscDdmDwScNode DisplayString
  fscDdmDwScPciBus INTEGER
  fscDdmDwScPciDevice INTEGER
  fscDdmDwScPciFunction INTEGER
  fscDdmDwScDriverName DisplayString
  fscDdmDwScDriverDescription DisplayString

FscDdmMpPiece  
SEQUENCE    
  fscDdmMpIndex INTEGER
  fscDdmMpMpPort INTEGER
  fscDdmMpMpPath INTEGER
  fscDdmMpMpTarget INTEGER
  fscDdmMpMpLun INTEGER
  fscDdmMpMpGroupNumber INTEGER
  fscDdmMpMpAutoRecovery INTEGER
  fscDdmMpMpAutoFailback INTEGER
  fscDdmMpMpCabinetHandling INTEGER
  fscDdmMpMpStatus INTEGER
  fscDdmMpMpPreferred INTEGER
  fscDdmMpDwName DisplayString
  fscDdmMpDwGroupNumber INTEGER
  fscDdmMpScPort INTEGER
  fscDdmMpScPath INTEGER
  fscDdmMpScTarget INTEGER
  fscDdmMpScLun INTEGER
  fscDdmMpScDiskNumber INTEGER
  fscDdmMpScSize INTEGER
  fscDdmMpScSignature INTEGER
  fscDdmMpScType INTEGER
  fscDdmMpScInquiry DisplayString
  fscDdmMpScResource DisplayString
  fscDdmMpScNode DisplayString
  fscDdmMpScPciBus INTEGER
  fscDdmMpScPciDevice INTEGER
  fscDdmMpScPciFunction INTEGER
  fscDdmMpScDriverName DisplayString
  fscDdmMpScDriverDescription DisplayString

Defined Values

sni 1.3.6.1.4.1.231
OBJECT IDENTIFIER    

sniProductMibs 1.3.6.1.4.1.231.2
OBJECT IDENTIFIER    

sniExtensions 1.3.6.1.4.1.231.2.10
OBJECT IDENTIFIER    

sniServerMgmt 1.3.6.1.4.1.231.2.10.2
OBJECT IDENTIFIER    

sniCommon 1.3.6.1.4.1.231.2.10.2.2
OBJECT IDENTIFIER    

fscDuplexDataManager 1.3.6.1.4.1.231.2.10.2.2.9
OBJECT IDENTIFIER    

fscDdmAgentInfo 1.3.6.1.4.1.231.2.10.2.2.9.1
OBJECT IDENTIFIER    

fscDdmStatus 1.3.6.1.4.1.231.2.10.2.2.9.2
OBJECT IDENTIFIER    

fscDdmDwContainer 1.3.6.1.4.1.231.2.10.2.2.9.3
OBJECT IDENTIFIER    

fscDdmMPContainer 1.3.6.1.4.1.231.2.10.2.2.9.4
OBJECT IDENTIFIER    

fscDdmTrapInfo 1.3.6.1.4.1.231.2.10.2.2.9.10
OBJECT IDENTIFIER    

fscDdmAgentId 1.3.6.1.4.1.231.2.10.2.2.9.1.1
DuplexDataManager SNMP agent ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmAgentCompany 1.3.6.1.4.1.231.2.10.2.2.9.1.2
DuplexDataManager SNMP agent company.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmAgentVersion 1.3.6.1.4.1.231.2.10.2.2.9.1.3
DuplexDataManager SNMP agent version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmAgentBuild 1.3.6.1.4.1.231.2.10.2.2.9.1.4
DuplexDataManager SNMP agent build date and time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmLastDate 1.3.6.1.4.1.231.2.10.2.2.9.2.1
Date of last recent reconfiguration in time_t (seconds since 1/1/1970 00:00:00).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmCurrentStatus 1.3.6.1.4.1.231.2.10.2.2.9.2.2
Overall status of the driver, agent and the underlying objects. Possible values are: OK everything is fine DEGRADED at least one MultiPath or DuplexWrite group is in a degraded state (e.g. piece failed) ERROR software exception occured (software bug) FAILED communication with driver failed (e.g. driver not installed)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), degraded(2), error(3), failed(4)  

fscDdmInstallationType 1.3.6.1.4.1.231.2.10.2.2.9.2.3
Type of installed DuplexDataManager edition. Possible values are: DDMWIN PRIMERGY DuplexDataManager(R) (Windows) DDEWIN PRIMERGY easyMirror(TM) (Windows) MPWIN PRIMERGY MultiPath (Windows) DDMLX PRIMERGY DuplexDataManager(R) (Linux) DDELX PRIMERGY easyMirror(TM) (Linux) MPLX PRIMERGY MultiPath (Linux) UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ddewin(1), ddmwin(2), mpwin(3), ddelx(4), ddmlx(5), mplx(6), unknown(99)  

fscDdmDwPieceTable 1.3.6.1.4.1.231.2.10.2.2.9.3.1
Table of all pieces DuplexWrite has detected.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FscDdmDwPiece

fscDdmDwPiece 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1
Entry in table of DuplexWrite pieces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FscDdmDwPiece  

fscDdmDwIndex 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.1
Unique value for each DuplexWrite piece, starts at 0 and remains unchanged from one re-initialization of the agent to the next. Only used as index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwDwPort 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.2
Virtual SCSI port number of the DuplexWrite group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwDwPath 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.3
Virtual SCSI path number of the DuplexWrite group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwDwTarget 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.4
Virtual SCSI target ID of the DuplexWrite group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwDwLun 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.5
Virtual SCSI LUN of the DuplexWrite group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwDwName 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.6
Name of the DuplexWrite group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmDwDwGroupNumber 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.7
Internal group number of the DuplexWrite group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwDwPieceNumber 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.8
Internal piece number in the DuplexWrite group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwDwSize 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.9
Size of the DuplexWrite group in MegaBytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwDwRoot 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.10
RootDisk flag of the DuplexWrite group. The RootDisk flag indicates special handling for boot/system disks. Possible values are: ON RootDisk flag is turned on OFF RootDisk flag is turned off UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), unknown(99)  

fscDdmDwDwRecoverMode 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.11
Recover mode of the DuplexWrite groups. Possible values are: COPY during Recover all blocks are copied from one disk to another VERIFY during Recover blocks are read from all disks, compared and only written when a difference is detected DELTA during Recover only those areas of the disk are copied that were changed since the group broke up UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER copy(1), verify(2), delta(3), unknown(99)  

fscDdmDwDwStatus 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.12
Status of the DuplexWrite piece. Possible values are: ONLINE piece is working properly PREFERRED piece is working properly, used for read operations ERROR error occured during operation RECOVER data of the piece is updated from the other DISABLED operations on piece are stopped CLUSTER piece reserved by other cluster node HOTSPARE piece reserved as hotspare BROKEN piece was replaced by hotspare UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER online(1), preferred(2), error(3), recover(4), disabled(5), cluster(6), hotspare(7), broken(8), unknown(99)  

fscDdmDwDwReason 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.13
Reason why a status was set for the DuplexWrite piece. Possible values are: READFAILED read error WRITEFAILED write error RESERVATIONCONFLICT piece disabled because of SCSI reservation problems TIMEOUTOFSYNC piece disabled because timestamp was older than that of the other one HOSTOUTOFSYNC piece disabled because of different hostnames in DuplexWrite key STATUSOUTOFSYNC piece disabled because of ambiguous status USER status set by user WRITECONFIGFAILED COD could not be updated on disk READCONFIGFAILED COD could not be reread RECOVERREADFAILED data could not be read during recover process RECOVERWRITEFAILED data could not be written during recover process SPLITMIRROR piece disabled because second piece is configured but not accessible ONLINEPIECEFAILED piece disabled because the other (online) piece failed during recover SNAPSHOTINACTIVEPIECE piece disabled due to Snapshot ONLINEPIECEFORCED the more recent piece was set to online during boot PNPREMOVE PNP REMOVE request caused piece to be set to ERROR WRITEFLAG data is inconsistent - COD could not be synced after last WRITE DUPLICATESIGNATURE a duplicate signature was detected SIGNATURESAREWRONG signatures of both pieces of the DuplexWrite group are not the same BITMAPCOPIED piece was disabled after clone bitmap was copied to user GIVEUP give up this piece SPLITBRAIN disabled because a possible split brain situation was detected WRITEPROTECED this piece was disabled because the media is write protected PIECECONSERVED this piece is in status error, although it has the higher write counter - conserve it UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER readfailed(1), writefailed(2), reservationconflict(3), timeoutofsync(4), hostoutofsync(5), statusoutofsync(6), user(7), writeconfigfailed(8), readconfigfailed(9), recoverreadfailed(10), recoverwritefailed(11), splitmirror(12), onlinepiecefailed(13), snapshotinactivepiece(14), onlinepieceforced(15), pnpremove(16), writeflag(17), duplicatesignature(18), signaturesarewrong(19), bitmapcopied(20), giveup(21), splitbrain(22), writeprotected(23), piececonserved(24), unknown(99)  

fscDdmDwDwActive 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.14
Active DuplexWrite piece for Snapshot. Possible values are: ON piece is an active piece for Snapshot OFF piece is not an active piece for Snapshot UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), unknown(99)  

fscDdmDwDwRecoverProgress 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.15
Percentage of the Recover progress of the DuplexWrite piece. If no Recover is running the value is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwDwHidden 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.16
Hidden flag for DuplexWrite piece. Possible values are: ON piece is hidden from the operating system (not claimable) OFF piece is not hidden UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), unknown(99)  

fscDdmDwDwRecent 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.17
Recent flag for DuplexWrite piece. When no piece is Online the Recent flag indicates which piece was Online more recently. Possible values are: ON piece is the recent one OFF piece is not the recent one UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), unknown(99)  

fscDdmDwDwForced 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.18
Forced flag for DuplexWrite piece. This flag indicates that the driver forced this piece Online during boot although it was not shutdown in status Online. Possible values are: ON piece was forced ONLINE during boot OFF piece was not forced ONLINE during boot UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), unknown(99)  

fscDdmDwDwPieceCount 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.19
Number of configured pieces in the DuplexWrite group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwDwPieceFound 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.20
Number of detected pieces in the DuplexWrite group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwDwBalance 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.21
Dynamic Diskload Balancing state of the DuplexWrite group. Possible values are: ON Dynamic Diskload Balancing is turned on OFF Dynamic Diskload Balancing is turned off UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), unknown(99)  

fscDdmDwMpGroupNumber 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.22
Internal MultiPath group number of the DuplexWrite piece starting with 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwScPort 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.23
Real SCSI port number of the DuplexWrite piece.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwScPath 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.24
Real SCSI path number of the DuplexWrite piece.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwScTarget 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.25
Real SCSI target ID of the DuplexWrite piece.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwScLun 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.26
Real SCSI LUN of the DuplexWrite piece.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwScDiskNumber 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.27
Operating system assigned disk number of the DuplexWrite piece.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwScSize 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.28
Capacity of the DuplexWrite piece in MegaBytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwScSignature 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.29
Operating system assigned unique key (signature) of the DuplexWrite piece. If no signature is available the value is -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwScType 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.30
The SCSI type of the DuplexWrite piece. Possible values are: DISK direct access device TAPE tape device PRINTER printer device PROCESSOR processor device WORM write once read multiple device CDROM read only direct access device SCANNER scanner device OPTICALDISK optical device JUKEBOX medium changer NETWORK communication device UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disk(1), tape(2), printer(3), processor(4), worm(5), cdrom(6), scanner(7), opticaldisk(8), jukebox(9), network(10), unknown(99)  

fscDdmDwScInquiry 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.31
SCSI inquiry string (vendor and product id) of the DuplexWrite piece.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmDwScResource 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.32
Cluster resource name of the DuplexWrite piece. Empty, if the piece is not a cluster resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmDwScNode 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.33
Cluster node name that owns the DuplexWrite piece. Empty, if the piece is not a cluster resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmDwScPciBus 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.34
PCI location of the controller (bus number). -1 if the location cannot be detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwScPciDevice 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.35
PCI location of the controller (device number). -1 if the location cannot be detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwScPciFunction 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.36
PCI location of the controller (function number). -1 if the location cannot be detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmDwScDriverName 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.37
Name of the driver that handles the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmDwScDriverDescription 1.3.6.1.4.1.231.2.10.2.2.9.3.1.1.38
Description of the driver that handles the controller. Empty, if no description is available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmMpPieceTable 1.3.6.1.4.1.231.2.10.2.2.9.4.1
Table of all paths MultiPath has detected.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FscDdmMpPiece

fscDdmMpPiece 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1
Entry in table of MultiPath paths.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FscDdmMpPiece  

fscDdmMpIndex 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.1
Unique value for each MultiPath path, starts at 0 and remains unchanged from one re-initialization of the agent to the next. Only used as index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpMpPort 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.2
Virtual SCSI port number of the MultiPath group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpMpPath 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.3
Virtual SCSI path number of the MultiPath group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpMpTarget 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.4
Virtual SCSI target ID of the MultiPath group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpMpLun 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.5
Virtual SCSI LUN of the MultiPath group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpMpGroupNumber 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.6
Internal group number of the MultiPath group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpMpAutoRecovery 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.7
AutoRecovery status of the MultiPath group. When AutoRecovery is turned on a repaired connection returns into a MultiPath group as Active or Standby otherwise it remains in status Error. Possible values are: ON AutoRecovery is turned on OFF AutoRecovery is turned off UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), unknown(99)  

fscDdmMpMpAutoFailback 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.8
AutoFailback status of the MultiPath group. If AutoFailback is turned on a repaired connection returns into a MultiPath group in the state it was before the error occured. Possible values are: ON AutoFailback is turned on OFF AutoFailback is turned off UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), unknown(99)  

fscDdmMpMpCabinetHandling 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.9
Connected storage type. If this cannot be detected the value is UNKNOWN. Possible values are: DEFAULT S40, JBOD CLARIION FibreCAT UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER default(1), clariion(2), unknown(99)  

fscDdmMpMpStatus 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.10
Status of the MultiPath path. Possible values are: ACTIVE the piece can accept I/Os. When LoadBalancing is off only one path of a MultiPath group can be active STANDBY the path waits until an active path fails and takes over all I/Os then ERROR the path failed due to an error DISABLED the path is turned off - no I/O is possible UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), standby(2), error(3), disabled(4), unknown(99)  

fscDdmMpMpPreferred 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.11
Flag which path of a MultiPath group will be active after an error situation is cleared. This flag is only valid in case of AutoFailback. Possible values are: ON use the path as preferred MultiPath path OFF not marked as the preferred MultiPath path UNKNOWN none of the above
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), unknown(99)  

fscDdmMpDwName 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.12
Name of the DuplexWrite group where the MultiPath group is piece of. Empty, if the MultiPath group is not a member of a DuplexWrite group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmMpDwGroupNumber 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.13
Internal DuplexWrite group number where the MultiPath group is piece of. -1, if the MultiPath group is not a member of a DuplexWrite group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpScPort 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.14
Real SCSI port number of the MultiPath path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpScPath 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.15
Real SCSI path number of the MultiPath path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpScTarget 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.16
Real SCSI target ID of the MultiPath path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpScLun 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.17
Real SCSI LUN of the MultiPath path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpScDiskNumber 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.18
Operating system assigned disk number of the MultiPath path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpScSize 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.19
Capacity of the MultiPath path in MegaBytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpScSignature 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.20
Operating system assigned unique key (signature) of the MultiPath path. If the signature cannot be detected or is not available the value is -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpScType 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.21
The SCSI type of the MultiPath path. Possible values are: DISK direct access device TAPE tape device PRINTER printer device PROCESSOR processor device WORM write once read multiple device CDROM read only direct access device SCANNER scanner device OPTICALDISK optical device JUKEBOX medium changer NETWORK communication device UNKNOWN none of the above or cannot be detected
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disk(1), tape(2), printer(3), processor(4), worm(5), cdrom(6), scanner(7), opticaldisk(8), jukebox(9), network(10), unknown(11)  

fscDdmMpScInquiry 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.22
SCSI inquiry string (vendor and product id) of the MultiPath path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmMpScResource 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.23
Cluster resource name of the MultiPath path. Empty, if the piece is not a cluster resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmMpScNode 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.24
Cluster node name that owns the MultiPath path. Empty, if the piece is not a cluster resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmMpScPciBus 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.25
PCI location of the controller (bus number). -1 if the location cannot be detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpScPciDevice 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.26
PCI location of the controller (device number). -1 if the location cannot be detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpScPciFunction 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.27
PCI location of the controller (function number). -1 if the location cannot be detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fscDdmMpScDriverName 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.28
Name of the driver that handles the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmMpScDriverDescription 1.3.6.1.4.1.231.2.10.2.2.9.4.1.1.29
Description of the driver that handles the controller. Empty, if no description is available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fscDdmTrapServerName 1.3.6.1.4.1.231.2.10.2.2.9.10.1
Name of the server where the trap occured.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

fscDdmTrapTime 1.3.6.1.4.1.231.2.10.2.2.9.10.2
Time the trap occured (in seconds since 1/1/1970 00:00:00).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

fscDdmTrapPort 1.3.6.1.4.1.231.2.10.2.2.9.10.3
Physical SCSI port number where the change occured.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

fscDdmTrapPath 1.3.6.1.4.1.231.2.10.2.2.9.10.4
Physical SCSI path number where the change occured.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

fscDdmTrapTarget 1.3.6.1.4.1.231.2.10.2.2.9.10.5
Physical SCSI target ID where the change occured.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

fscDdmTrapLun 1.3.6.1.4.1.231.2.10.2.2.9.10.6
Physical SCSI LUN where the change occured.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

fscDdmNewConfig 1400
The driver has created a new DuplexWrite group or has added a new piece to an existing DuplexWrite group as requested by the user.
TRAP-TYPE    

fscDdmPieceRemoved 1401
The driver has removed a piece from a DuplexWrite group as requested by the user.
TRAP-TYPE    

fscDdmConfigRemoved 1402
The driver has removed a DuplexWrite group as requested by the user.
TRAP-TYPE    

fscDdmStatusSet 1403
The driver has set the status of a DuplexWrite piece as requested by the user.
TRAP-TYPE    

fscDdmUpdateStatus 1404
The driver has updated the status of a DuplexWrite piece.
TRAP-TYPE    

fscDdmPieceRecovered 1405
The driver has successfully recovered a DuplexWrite group. Both pieces are ONLINE.
TRAP-TYPE    

fscDdmRecoverAborted 1406
The driver has aborted the recover process of a DuplexWrite group as requested by the user.
TRAP-TYPE    

fscDdmReservationConflict 1407
The driver has detected a reservation conflict. A whole DuplexWrite group is not accessible from now on. This is only an error if it happens during operation (not initialization) of the group and if the group is not on another cluster node.
TRAP-TYPE    

fscDdmConfigChanged 1408
The driver has done a rescan/reread and found a new configuration.
TRAP-TYPE    

fscDdmConfigInvalidated 1409
The driver has invalidated the configuration information for a DuplexWrite group. The configuration information is reread before the next access of the DuplexWrite group on this cluster element.
TRAP-TYPE    

fscDdmActiveLunChanged 1410
The driver has selected a specified piece of a DuplexWrite group for read commands.
TRAP-TYPE    

fscDdmPieceFailed 1411
The driver has detected an error on a DuplexWrite piece.
TRAP-TYPE    

fscDdmRootFlagChanged 1412
The driver has changed the root behavior of a DuplexWrite group.
TRAP-TYPE    

fscDdmForceActive 1413
The driver has marked a disk of a DuplexWrite group forced active at next boot. The partner disk can be used as Snapshot.
TRAP-TYPE    

fscDdmNameChanged 1414
The driver has changed the name of a DuplexWrite group.
TRAP-TYPE    

fscDdmPathFailed 1415
The driver has detected an error on one path of a MultiPath group.
TRAP-TYPE    

fscDdmRetry 1416
The driver has detected an error on one path of a MultiPath group and the retry of the command was successful on another path.
TRAP-TYPE    

fscDdmActivePortChanged 1417
The driver has changed the active path of a MultiPath group.
TRAP-TYPE    

fscDdmReconfigured 1418
The driver has detected a MultiPath configuration change.
TRAP-TYPE    

fscDdmStatusChanged 1419
The MultiPath status has changed. The user has activated, disabled, ... the MultiPath path, or changed the failover policy. The path has changed as request of MultiPath AutoBalance.
TRAP-TYPE    

fscDdmAutoRecovered 1420
The driver has enabled a path of a MultiPath group (AutoRecovery).
TRAP-TYPE    

fscDdmErrorCleared 1421
The error of MultiPath path is cleared and reused (AutoFailback).
TRAP-TYPE    

fscDdmPnPRemove 1422
A Plug and Play Removal of an device was detected.
TRAP-TYPE    

fscDdmPnPNew 1423
A Plug and Play Add of an device was detected.
TRAP-TYPE    

fscDdmCluster 1424
The DuplexDataManager service has detected a cluster configuration change.
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor