SHE-SHDSL-MIB

File: SHE-SHDSL-MIB.mib (224437 bytes)

Imported modules

AN-MIB IF-MIB PerfHist-TC-MIB
SHE-ALARMING-MIB SHE-TC-MIB SNMP-FRAMEWORK-MIB
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC

Imported symbols

she ifIndex InterfaceIndex
PerfCurrentCount PerfIntervalCount sheAlarmTimeAndDate
sheAlarmReportingSource sheAlarmReportingSourceType sheAlarmSeverity
SheControlStatusType SnmpAdminString OBJECT-GROUP
MODULE-COMPLIANCE NOTIFICATION-GROUP TimeTicks
Integer32 Unsigned32 Gauge32
Counter32 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE TEXTUAL-CONVENTION

Defined Types

SheShdslOpStateType  
INTEGER idle(0), data(1), bootupLoad(8), bootupLoadDone(9), handshake(16), pmms(20), training(24), framerGearShift(26), framerManualReset(27), silence(29), analogLb(128), rmtFramerLb(130), digitalLb(131), spectrumTest(133), selt(138), pSDTest(139), lclFramerLb(142), interfaceLb(143), bertTest(144), analogLbBertTest(145), digLbBertTest(146)    

SheShdslStartProgressType  
INTEGER noActivity(0), preActivation(1), activation(4), checkBitrate(7), pmmsChkComnRate(8), transmitCr(55), transmitSc(56), transmitSr(57), coLineAgc(64), cpLineAgc(65), fdEcTrain(66), equalizerTrain(67), tipRingAligned(68), transmitTc(69), receiveTr(70), transmitFc1(71), transmitFc2(72), receiveTc(73), transmitTr(74), receiveFc(75), spectTestOk(113), albTestOk(114), dlbTestOk(115), crcFail(116), framerSyncFail(117), snrMarginFail(118), loadCppa(128), loadCptrain(129), loadCptom(130), loadCpdm(131), loadCopa(144), loadCotrain(145), loadCotom(146), loadCodm(147)    

SheShdslLineSwapType  
INTEGER unswapped(0), swapped(1)    

SheShdslFramerSyncType  
INTEGER outOfSync(0), inSync(1)    

SheShdslBertErrorType  
INTEGER outOfSync(0), framedSync(64), unframedSync(128)    

SheShdslUtopiaCellDelineationType  
INTEGER inSync(1), preSync(160), hunt(240)    

SheShdslRmtPowerBackoffType  
INTEGER enable(0), disable(32768)    

SheShdslEocStateType  
INTEGER online(0), discovery(1), inventory(2), configuration(3), cmdInProgress(4)    

SheShdslNtrFaultType  
INTEGER present(0), absent(1)    

SheShdslCpeMasterCoreType  
INTEGER core0(0), core1(16), core2(32), core3(48), core4(64), core5(80), core6(96), core7(112), noMasterCore(128)    

SheShdslParametricTestResultType  
INTEGER pass(0), fail(1)    

SheShdslStartUpInfoType  
INTEGER nonBis(0), bis(1), unknown(2)    

SheSdslActionType  
INTEGER startUp(0), abortReq(2), gearShiftReq(6), downloadReq(8), bertStartTxReq(17), bertStartRxReq(18), bertStopReq(20), spectrumDownReq(25), spectrumUpReq(26), spectrumTxRxReq(32), hybridLossTestReq(33), residualEchoReq(34), totalEchoReq(35), nextPsdReq(36), autoRetrainOnReq(37), autoRetrainOffReq(38), propEocOnReq(45), propEocOffReq(46), rmtAtmCellStatusReq(47), rmtFullStatusReq(48)    

SheShdslModeType  
INTEGER co(0), cpe(1)    

SheShdslPowerScaleType  
INTEGER defaultScale(26112)    

SheShdslEncodeCoeffAType  
INTEGER default(366)    

SheShdslEncodeCoeffBType  
INTEGER default(817)    

SheShdslNTRType  
INTEGER disable(1), refClkIp8k(2), refClkOp4096k(4)    

SheShdslInitiateType  
INTEGER default(0), co(1), cpe(2)    

SheShdslFramerRxClockModeType  
INTEGER slave(2), internal(3)    

SheShdslEnableModeType  
INTEGER disable(0), enable(1)    

SheShdslSerialAtmCiuBufferSizeType  
INTEGER size24(24), size53(53)    

SheShdslSetReqSilenceModeEnableType  
INTEGER disable(0), enable(4)    

SheShdslHsMaxBitsPerBaudType  
INTEGER use1Bit(1), use2Bit(2), default(3)    

SheShdslHsAnnexBType  
INTEGER default(1), anfp(2), annexBorAnfp(3)    

SheShdslEnableType  
INTEGER enable(1), disable(2)    

SheShdslClkEdgeType  
INTEGER negative(0), positive(1)    

SheShdslPulseLvlType  
INTEGER low(0), high(1)    

SheShdslFramerType  
INTEGER unframed(0), t1Slotted(1), e1Slotted(2), utopiaL2(3), nx64(6), serialATM(7), vC12(8), iMA(9)    

SheShdslAFEType  
INTEGER saturn(3), saturnLg(4)    

SheShdslUtopiaDataBusWidthType  
INTEGER tx8Rx8(0), tx16Rx16(1), tx16Rx8(2), tx8Rx16(3)    

SheShdslPAMModeType  
INTEGER pam16Tc(0), pam32Tc(1), pamAutoTc(2)    

SheShdslControlRequestType  
INTEGER noRequest(1), modifysheShdslLineParamsEntry(101), modifyshehdsl2ShdslSpanConfEntry(201), modifyshehdsl2ShdslSpanConfEntryAlarmProfile(202), modifyshehdsl2ShdslEndpointConfEntry(301), modifyshehdsl2ShdslEndpointMaintEntry(401), modifyshehdsl2ShdslUnitMaintEntry(501), createshehdsl2ShdslSpanConfProfile(601), modifyshehdsl2ShdslSpanConfProfile(602), deleteshehdsl2ShdslSpanConfProfile(603), createshehdsl2ShdslEndpointAlarmConfProfile(701), modifyshehdsl2ShdslEndpointAlarmConfProfile(702), deleteshehdsl2ShdslEndpointAlarmConfProfile(703), modifyShdslVccTp(801), modifyAdslVccTpLoopTest(802), createShdslVccTp(803), deleteShdslVccTp(804)    

SheShdslControlRequestResultType  
INTEGER noRequest(1), comExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), profileNameStringUnknown(2001), profileNameToLong(2002), profileNameAlreadyExist(2003), maxNumberOfProfilesReached(2004), profileNotExist(2005), profileAssignFailOnActivePort(2006), profileTypDefaultCouldNotModified(2010), profileModifyFailOnInvalidArguments(2012), profileModifyFailOnInvalidMarginSettings(2013), profileModifyFailOnInvalidDataRateSettings(2014), profileWireIfModifyFailOnAssignedProfiles(2015), profileRefClockModifyFailOnAssignedProfiles(2016), profilePowerFeedModifyFailOnAssignedProfiles(2017), internalFailureWriteToDataBase(2020), internalFailureReadFromDataBase(2021), profileUsedByActivePorts(2022), internalFailureDuringIuCommunication(2030), portNumberNotExist(2040), portNumberHasWrongDSLType(2041), portNumberOnLegacyCardType(2042)    

SheShdslStatus4WireHsModeType  
INTEGER standard(0), enhanced(1)    

SheShdslBondingGroupType  
INTEGER twoPortsBondingGroup(1), fourPortsBondingGroup(2)    

Shehdsl2ShdslEndpointCurrStatusType  
BITS noDefect(0), powerBackoff(1), deviceFault(2), dcContinuityFault(3), snrMarginAlarm(4), loopAttenuationAlarm(5), loswFailureAlarm(6), configInitFailure(7), protocolInitFailure(8), noNeighborPresent(9), loopbackActive(10)    

Shehdsl2ShdslMaintTipRingReversalType  
INTEGER normal(1), reversed(2)    

Shehdsl2ShdslMaintLoopbackConfigType  
INTEGER noLoopback(1), normalLoopback(2), specialLoopback(3), digitalLoopback(4), analogLoopback(5), interfaceLoopback(6), localFramerLoopback(7), normalLoopbackEocId9(8), specialLoopbackEocId9(9)    

Shehdsl2ShdslMaintPowerBackOffType  
INTEGER default(1), enhanced(2), disable(3)    

Shehdsl2ShdslMaintSoftRestartType  
INTEGER ready(1), restart(2)    

Shehdsl2ShdslMaintUnitPowerSourceType  
INTEGER local(1), span(2)    

Shehdsl2ShdslSpanConfWireInterfaceType  
INTEGER twoWire(1), fourWire(2), fourWireBitInterleaved(3), fourWireByteInterleaveEnhanced(4), fourWireBitInterleaveEnhanced(5), sixWire(6), eightWire(7)    

Shehdsl2ShdslSpanConfPSDType  
INTEGER symmetric(1), asymmetric(2), r1Asymmetric(3), r2Asymmetric(4)    

Shehdsl2ShdslSpanConfPowerFeedingType  
INTEGER noPower(1), powerFeed(2), wettingCurrent(3)    

Shehdsl2ShdslSpanConfUsedTargetMarginsType  
BITS currCondDown(0), worstCaseDown(1), currCondUp(2), worstCaseUp(3)    

Shehdsl2ShdslSpanConfLineProbeEnableType  
INTEGER disable(1), enable(2)    

SheShdsl2CapListStyleType  
INTEGER newstyle(0), oldstylecaplist(1), autocaplist(2)    

SheAtmOamLevelType  
INTEGER undefined(0), f1(1), f2(2), f3(3), f4(4), f5(5)    

SheAtmOamLoopTestType  
INTEGER none(0), segment(1), endToEnd(2)    

SheAtmOamLoopTestResultType  
INTEGER segSuccess(0), segFailure(1), endToEndSuccess(2), endToEndFailure(3), aborted(4), progress(5), notAvailable(65535)    

SheHdsl2ShdslTransmissionModeType  
Contains the regional setting of the HDSL2/SHDSL span, represented as a bit-map of possible settings. The various bit positions are: Bit Meaning Description 1 region 1 Indicates ITU-T G.991.2 Annex A/F. 2 region 2 Indicates ITU-T G.991.2 Annex B/G.
TEXTUAL-CONVENTION    
  BITS region1(0), region2(1)  

SheHdsl2ShdslUnitId  
This is the unique identification for all units in a HDSL2/SHDSL Span. It is based on the EOC unit addressing scheme with reference to the xtuC.
TEXTUAL-CONVENTION    
  INTEGER xtuC(1), xtuR(2), xru1(3), xru2(4), xru3(5), xru4(6), xru5(7), xru6(8), xru7(9), xru8(10)  

SheHdsl2ShdslUnitSide  
This is the referenced side of a HDSL2/SHDSL unit - Network or Customer side. The side facing the Network is the Network side, while the side facing the Customer is the Customer side.
TEXTUAL-CONVENTION    
  INTEGER networkSide(1), customerSide(2)  

SheHdsl2ShdslWirePair  
This is the referenced pair of wires in an HDSL2/SHDSL segment. HDSL2 only supports a single pair (wirePair1 or two wire), SHDSL lines support an optional second pair (wirePair2 or four wire), and G.shdsl.bis support an optional third pair (wirePair3 or six wire) and an optional fourth pair (wirePair4 or eight wire).
TEXTUAL-CONVENTION    
  INTEGER wirePair1(1), wirePair2(2), wirePair3(3), wirePair4(4)  

SheHdsl2ShdslPerfTimeElapsed  
The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock or the addition of a leap second, the current interval exceeds the maximum value, the agent will return the maximum value. For 15 minute intervals, the range is limited to (0..899). For 24 hour intervals, the range is limited to (0..86399).
TEXTUAL-CONVENTION    
  Unsigned32 0..86399  

SheHdsl2ShdslPerfCurrDayCount  
A gauge associated with interface performance measurements in a current 1-day (24 hour) measurement interval. The value of this gauge starts at zero at the beginning of an interval and is increased when associated events occur, until the end of the 1-day interval. At that time the value of the gauge is stored in the previous 1-day history interval, as defined in a companion object of type Hdsl2Shdsl1DayIntevalCount, and the current interval gauge is restarted at zero. In the case where the agent has no valid data available for this interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist. Please note that zero is a valid value.
TEXTUAL-CONVENTION    
  Gauge32  

SheHdsl2ShdslActivationStateType  
Activation or training state of the wire pair.
TEXTUAL-CONVENTION    
  INTEGER preActivation(1), activation(2), data(3)  

SheHdsl2Shdsl1DayIntervalCount  
A counter associated with interface performance measurements during the most previous 1-day (24 hour) measurement interval. The value of this gauge is equal to the value of the current day gauge, as defined in a companion object of type Hdsl2ShdslPerfCurrDayCount, at the end of its most recent interval. In the case where the agent has no valid data available for this interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist.
TEXTUAL-CONVENTION    
  Gauge32  

SheHdsl2ShdslClockReferenceType  
The various STU-C symbol clock references for the HDSL2/SHDSL span, represented as an enumeration.
TEXTUAL-CONVENTION    
  INTEGER localClk(1), networkClk(2), dataOrNetworkClk(3), dataClk(4)  

SheHdsl2ShdslTCLayerType  
This textual convention represents possible ATMPTM-TC types in G.bond/Eth ports. The following values are defined: tc6465 - 64/65-octet encapsulation, as defined in [802.3] Clause 61.3.3 tcHDLC - HDLC encapsulation, as defined in [G.998.2] Annex B ATM - ATM based xDSL bonding, as defined in [G.998.1]
TEXTUAL-CONVENTION    
  INTEGER atm(0), tc6465(1), tcHDLC(2)  

SheHdsl2ShdslPerfIntervalThreshold  
This convention defines a range of values that may be set in a fault threshold alarm control. As the number of seconds in a 15-minute interval numbers at most 900, objects of this type may have a range of 0...900, where the value of 0 disables the alarm.
TEXTUAL-CONVENTION    
  Unsigned32 0..900  

SheShdslLineStatusEntry  
SEQUENCE    
  sheShdslOpState SheShdslOpStateType
  sheShdslStartProgress SheShdslStartProgressType
  sheShdslFwRelease OCTET STRING
  sheShdslLineSwap SheShdslLineSwapType
  sheShdslRmtCountryCode OCTET STRING
  sheShdslRmtEncoderA Integer32
  sheShdslRmtEncoderB Integer32
  sheShdslRmtProviderCode OCTET STRING
  sheShdslLocDetect Unsigned32
  sheShdslTxPower Unsigned32
  sheShdslFramerSync SheShdslFramerSyncType
  sheShdslRmtTomData Unsigned32
  sheShdslDriftAlarm Unsigned32
  sheShdslReceiverGain Unsigned32
  sheShdslBertError SheShdslBertErrorType
  sheShdslFramerOHAndDefects OCTET STRING
  sheShdslRmtFwVersion Unsigned32
  sheShdslUtopiaCellDelineation SheShdslUtopiaCellDelineationType
  sheShdslUtopiaRxCellCnt Unsigned32
  sheShdslUtopiaCellDropCnt Unsigned32
  sheShdslUtopiaRxHecErrorCnt Unsigned32
  sheShdslUtopiaTxCellCnt Unsigned32
  sheShdslRmtNsfCusId Unsigned32
  sheShdslRmtNsfCusData OCTET STRING
  sheShdslLocalHandshake OCTET STRING
  sheShdslRemoteHandshake OCTET STRING
  sheShdslActualHandshake OCTET STRING
  sheShdslRmtTxPower Unsigned32
  sheShdslRmtPowerBackoff SheShdslRmtPowerBackoffType
  sheShdslAutoRetrainCount Unsigned32
  sheShdslEocState SheShdslEocStateType
  sheShdslFramerOneSecondCnt OCTET STRING
  sheShdslNtrFault SheShdslNtrFaultType
  sheShdslCpeMasterCore SheShdslCpeMasterCoreType
  sheShdslParametricTestResult SheShdslParametricTestResultType
  sheShdslParametricTestArray OCTET STRING
  sheShdslStartUpInfo SheShdslStartUpInfoType
  sheShdslBisModeLocalHandshake OCTET STRING
  sheShdslBisModeRemoteHandshake OCTET STRING
  sheShdslBisModeActualHandshake OCTET STRING

SheShdslLineParamsEntry  
SEQUENCE    
  sheShdslAction SheSdslActionType
  sheShdslMode SheShdslModeType
  sheShdslPowerScale SheShdslPowerScaleType
  sheShdslEncodeCoeffA SheShdslEncodeCoeffAType
  sheShdslEncodeCoeffB SheShdslEncodeCoeffBType
  sheShdslTxEOCBufferLen Unsigned32
  sheShdslRxEOCBufferLen Unsigned32
  sheShdslNTR SheShdslNTRType
  sheShdslRxUpstreamFrameSync Unsigned32
  sheShdslRxDownstreamFrameSync Unsigned32
  sheShdslRxUpstreamStuffBits Unsigned32
  sheShdslRxDownstreamStuffBits Unsigned32
  sheShdslInitiate SheShdslInitiateType
  sheShdslFramerRxClockMode SheShdslFramerRxClockModeType
  sheShdslFramerRxPllMode SheShdslEnableModeType
  sheShdslSerialAtmCiuBufferSize SheShdslSerialAtmCiuBufferSizeType
  sheShdslTxFramerPulseDelay Unsigned32
  sheShdslRxFramerPulseDelay Unsigned32
  sheShdslMultiFrameMode SheShdslEnableModeType
  sheShdslEnable4or6MbpsBitrate SheShdslEnableModeType
  sheShdslTomDataWord1 Unsigned32
  sheShdslTomDataWord2 Unsigned32
  sheShdslTomDataWord3 Unsigned32
  sheShdslTomDataWord4 Unsigned32
  sheShdslSetReqSilenceMode SheShdslSetReqSilenceModeEnableType
  sheShdslSetIndividualRates1 Unsigned32
  sheShdslSetIndividualRates2 Unsigned32
  sheShdslSetIndividualRates3 Unsigned32
  sheShdslSatmCellDelineation SheShdslEnableModeType
  sheShdslFramerCellDropOnError SheShdslEnableModeType
  sheShdslGearShiftType Unsigned32
  sheShdslHsNsf SheShdslEnableModeType
  sheShdslHsMaxBitsPerBaud SheShdslHsMaxBitsPerBaudType
  sheShdslHsCusId Unsigned32
  sheShdslHsCusData0 Unsigned32
  sheShdslHsCusData1 Unsigned32
  sheShdslHsAnnexBType SheShdslHsAnnexBType
  sheShdslAutoRetrain SheShdslEnableModeType
  sheShdslArCrcCheck SheShdslEnableModeType
  sheShdslArFramerSyncCheck SheShdslEnableModeType
  sheShdslArSnrMarginCheck SheShdslEnableModeType
  sheShdslArCrcThreshold Unsigned32
  sheShdslArSnrMarginThreshold Unsigned32
  sheShdslArRetrainTime INTEGER
  sheShdslOpStateTrapEnable SheShdslEnableType
  sheShdslTxFrmrDataClkEdge SheShdslClkEdgeType
  sheShdslRxFrmrDataClkEdge SheShdslClkEdgeType
  sheShdslTxFrmrPulseClkEdge SheShdslClkEdgeType
  sheShdslRxFrmrPulseClkEdge SheShdslClkEdgeType
  sheShdslTxFrmrPulseLvl SheShdslPulseLvlType
  sheShdslRxFrmrPulseLvl SheShdslPulseLvlType
  sheShdslFrmrOH Unsigned32
  sheShdslLoopAttenCrossingTrapEnable SheShdslEnableType
  sheShdslSNRMarginCrossingTrapEnable SheShdslEnableType
  sheShdslFramerOHAndDefectsTrapEnable SheShdslEnableType
  sheShdslParametricTestInputFile OCTET STRING
  sheShdslParamHybridLossTestStart Unsigned32
  sheShdslParamHybridLossTestEnd Unsigned32
  sheShdslFramerType SheShdslFramerType
  sheShdslAFEType SheShdslAFEType
  sheShdslUtopiaL2TxAddress Unsigned32
  sheShdslUtopiaL2RxAddress Unsigned32
  sheShdslUtopiaDataBusWidth SheShdslUtopiaDataBusWidthType
  sheShdslPAMMode SheShdslPAMModeType

SheShdslSpanStatusExtnEntry  
SEQUENCE    
  sheShdslStatusPMMSMaxLineRate Unsigned32
  sheShdslStatus4WireHsMode SheShdslStatus4WireHsModeType

SheShdslBondingGroupEntry  
SEQUENCE    
  sheShdslBondingGroupBridgePortList OCTET STRING
  sheShdslBondingGroupType SheShdslBondingGroupType

Shehdsl2ShdslSpanConfEntry  
SEQUENCE    
  shehdsl2ShdslSpanConfNumRepeaters Unsigned32
  shehdsl2ShdslSpanConfProfile SnmpAdminString
  shehdsl2ShdslSpanConfAlarmProfile SnmpAdminString

Shehdsl2ShdslSpanStatusEntry  
SEQUENCE    
  shehdsl2ShdslStatusNumAvailRepeaters Unsigned32
  shehdsl2ShdslStatusMaxAttainableLineRate Unsigned32
  shehdsl2ShdslStatusActualLineRate Unsigned32
  shehdsl2ShdslStatusTransmissionModeCurrent SheHdsl2ShdslTransmissionModeType
  sheShdslStatusMaxAttainablePayloadRate Unsigned32
  sheShdslStatusActualPayloadRate Unsigned32
  sheShdslSpanStatusPAMModulation SheShdslPAMModeType

Shehdsl2ShdslInventoryEntry  
SEQUENCE    
  shehdsl2ShdslInvIndex SheHdsl2ShdslUnitId
  shehdsl2ShdslInvVendorID OCTET STRING
  shehdsl2ShdslInvVendorModelNumber OCTET STRING
  shehdsl2ShdslInvVendorSerialNumber OCTET STRING
  shehdsl2ShdslInvVendorEOCSoftwareVersion Integer32
  shehdsl2ShdslInvStandardVersion Integer32
  shehdsl2ShdslInvVendorListNumber OCTET STRING
  shehdsl2ShdslInvVendorIssueNumber OCTET STRING
  shehdsl2ShdslInvVendorSoftwareVersion OCTET STRING
  shehdsl2ShdslInvEquipmentCode OCTET STRING
  shehdsl2ShdslInvVendorOther OCTET STRING
  shehdsl2ShdslInvTransmissionModeCapability SheHdsl2ShdslTransmissionModeType

Shehdsl2ShdslEndpointConfEntry  
SEQUENCE    
  shehdsl2ShdslEndpointSide SheHdsl2ShdslUnitSide
  shehdsl2ShdslEndpointWirePair SheHdsl2ShdslWirePair
  shehdsl2ShdslEndpointAlarmConfProfile SnmpAdminString

Shehdsl2ShdslEndpointCurrEntry  
SEQUENCE    
  shehdsl2ShdslEndpointCurrAtn Integer32
  shehdsl2ShdslEndpointCurrSnrMgn Integer32
  shehdsl2ShdslEndpointCurrStatus Shehdsl2ShdslEndpointCurrStatusType
  shehdsl2ShdslEndpointES Counter32
  shehdsl2ShdslEndpointSES Counter32
  shehdsl2ShdslEndpointCRCanomalies Counter32
  shehdsl2ShdslEndpointLOSWS Counter32
  shehdsl2ShdslEndpointUAS Counter32
  shehdsl2ShdslEndpointCurr15MinTimeElapsed SheHdsl2ShdslPerfTimeElapsed
  shehdsl2ShdslEndpointCurr15MinES PerfCurrentCount
  shehdsl2ShdslEndpointCurr15MinSES PerfCurrentCount
  shehdsl2ShdslEndpointCurr15MinCRCanomalies PerfCurrentCount
  shehdsl2ShdslEndpointCurr15MinLOSWS PerfCurrentCount
  shehdsl2ShdslEndpointCurr15MinUAS PerfCurrentCount
  shehdsl2ShdslEndpointCurr1DayTimeElapsed SheHdsl2ShdslPerfTimeElapsed
  shehdsl2ShdslEndpointCurr1DayES SheHdsl2ShdslPerfCurrDayCount
  shehdsl2ShdslEndpointCurr1DaySES SheHdsl2ShdslPerfCurrDayCount
  shehdsl2ShdslEndpointCurr1DayCRCanomalies SheHdsl2ShdslPerfCurrDayCount
  shehdsl2ShdslEndpointCurr1DayLOSWS SheHdsl2ShdslPerfCurrDayCount
  shehdsl2ShdslEndpointCurr1DayUAS SheHdsl2ShdslPerfCurrDayCount
  shehdsl2ShdslEndpointCurrTipRingReversal Shehdsl2ShdslMaintTipRingReversalType
  shehdsl2ShdslEndpointCurrActivationState SheHdsl2ShdslActivationStateType

Shehdsl2Shdsl15MinIntervalEntry  
SEQUENCE    
  shehdsl2Shdsl15MinIntervalNumber Unsigned32
  shehdsl2Shdsl15MinIntervalEndTime TimeTicks
  shehdsl2Shdsl15MinIntervalES PerfIntervalCount
  shehdsl2Shdsl15MinIntervalSES PerfIntervalCount
  shehdsl2Shdsl15MinIntervalCRCanomalies PerfIntervalCount
  shehdsl2Shdsl15MinIntervalLOSWS PerfIntervalCount
  shehdsl2Shdsl15MinIntervalUAS PerfIntervalCount

Shehdsl2Shdsl1DayIntervalEntry  
SEQUENCE    
  shehdsl2Shdsl1DayIntervalNumber Unsigned32
  shehdsl2Shdsl1DayIntervalEndTime TimeTicks
  shehdsl2Shdsl1DayIntervalMoniSecs SheHdsl2ShdslPerfTimeElapsed
  shehdsl2Shdsl1DayIntervalES SheHdsl2Shdsl1DayIntervalCount
  shehdsl2Shdsl1DayIntervalSES SheHdsl2Shdsl1DayIntervalCount
  shehdsl2Shdsl1DayIntervalCRCanomalies SheHdsl2Shdsl1DayIntervalCount
  shehdsl2Shdsl1DayIntervalLOSWS SheHdsl2Shdsl1DayIntervalCount
  shehdsl2Shdsl1DayIntervalUAS SheHdsl2Shdsl1DayIntervalCount

Shehdsl2ShdslEndpointMaintEntry  
SEQUENCE    
  shehdsl2ShdslMaintLoopbackConfig Shehdsl2ShdslMaintLoopbackConfigType
  shehdsl2ShdslMaintTipRingReversal Shehdsl2ShdslMaintTipRingReversalType
  shehdsl2ShdslMaintPowerBackOff Shehdsl2ShdslMaintPowerBackOffType
  shehdsl2ShdslMaintSoftRestart Shehdsl2ShdslMaintSoftRestartType

Shehdsl2ShdslUnitMaintEntry  
SEQUENCE    
  shehdsl2ShdslMaintLoopbackTimeout Integer32
  shehdsl2ShdslMaintUnitPowerSource Shehdsl2ShdslMaintUnitPowerSourceType

Shehdsl2ShdslSpanConfProfileEntry  
SEQUENCE    
  shehdsl2ShdslSpanConfProfileIndex Unsigned32
  shehdsl2ShdslSpanConfProfileName SnmpAdminString
  shehdsl2ShdslSpanConfWireInterface Shehdsl2ShdslSpanConfWireInterfaceType
  shehdsl2ShdslSpanConfMinLineRate Unsigned32
  shehdsl2ShdslSpanConfMaxLineRate Unsigned32
  shehdsl2ShdslSpanConfPSD Shehdsl2ShdslSpanConfPSDType
  shehdsl2ShdslSpanConfTransmissionMode SheHdsl2ShdslTransmissionModeType
  shehdsl2ShdslSpanConfRemoteEnabled SheShdslEnableType
  shehdsl2ShdslSpanConfPowerFeeding Shehdsl2ShdslSpanConfPowerFeedingType
  shehdsl2ShdslSpanConfCurrCondTargetMarginDown Integer32
  shehdsl2ShdslSpanConfWorstCaseTargetMarginDown Integer32
  shehdsl2ShdslSpanConfCurrCondTargetMarginUp Integer32
  shehdsl2ShdslSpanConfWorstCaseTargetMarginUp Integer32
  shehdsl2ShdslSpanConfUsedTargetMargins Shehdsl2ShdslSpanConfUsedTargetMarginsType
  shehdsl2ShdslSpanConfReferenceClock SheHdsl2ShdslClockReferenceType
  shehdsl2ShdslSpanConfLineProbeEnable Shehdsl2ShdslSpanConfLineProbeEnableType
  shehdsl2ShdslSpanConfPAMConstellation SheShdslPAMModeType
  shehdsl2ShdslSpanConfTCLayerSupported SheHdsl2ShdslTCLayerType

Shehdsl2ShdslEndpointAlarmConfProfileEntry  
SEQUENCE    
  shehdsl2ShdslEndpointAlarmConfProfileIndex Integer32
  shehdsl2ShdslEndpointAlarmConfProfileName SnmpAdminString
  shehdsl2ShdslEndpointThreshLoopAttenuation Integer32
  shehdsl2ShdslEndpointThreshSNRMargin Integer32
  shehdsl2ShdslEndpointThreshES SheHdsl2ShdslPerfIntervalThreshold
  shehdsl2ShdslEndpointThreshSES SheHdsl2ShdslPerfIntervalThreshold
  shehdsl2ShdslEndpointThreshCRCanomalies Integer32
  shehdsl2ShdslEndpointThreshLOSWS SheHdsl2ShdslPerfIntervalThreshold
  shehdsl2ShdslEndpointThreshUAS SheHdsl2ShdslPerfIntervalThreshold

SheShdslVccTpEntry  
SEQUENCE    
  sheShdslVccTpIndex Integer32
  sheShdslVccTpSubLayerIndex InterfaceIndex
  sheShdslVccTpNumber Integer32
  sheShdslVccTpVpi Integer32
  sheShdslVccTpVci Integer32
  sheShdslVccTpOamLevel SheAtmOamLevelType
  sheShdslVccTpLoopTest SheAtmOamLoopTestType
  sheShdslVccTpLoopTestResult SheAtmOamLoopTestResultType
  sheShdslVccTpLoopLocId OCTET STRING
  sheShdslVccTpAlarmSeverityIndex Integer32

Defined Values

sheShdslMib 1.3.6.1.4.1.231.7.1.2.1.12
This MIB module defines a collection of objects for managing HDSL2/SHDSL lines according RFC3276. An agent may reside at either end of the line, however the MIB is designed to require no management communication between the modems beyond that inherent in the low-level EOC line protocol as defined in ANSI T1E1.4/2000-006 (for HDSL2 lines), or in ITU G.991.2 (for SHDSL lines). Adapted to support RFC 4319.
MODULE-IDENTITY    

sheShdslLineMIB 1.3.6.1.4.1.231.7.1.2.1.12.1
OBJECT IDENTIFIER    

sheShdslMIBObjects 1.3.6.1.4.1.231.7.1.2.1.12.1.2
OBJECT IDENTIFIER    

sheShdslCapabilityGroup 1.3.6.1.4.1.231.7.1.2.1.12.1.2.1
OBJECT IDENTIFIER    

sheShdslCapabilityLineTxCap 1.3.6.1.4.1.231.7.1.2.1.12.1.2.1.1
This bitmap specifies the transmission modes that the STU-C is capable of supporting. Right now, support for Annex A (q9921PotsNonOverlapped(2) and q9921PotsOverlapped(3)) is present. This value depends on the DSL PHY firmware present on Columbia MxU.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslTransmissionModeType  

sheShdslLineStatusTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2
This MO is proprietary extension of RFC 3276 MIB and contains the proprietary line status. The table will only be supported for interfaces of iftype sdsl (96)!
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheShdslLineStatusEntry

sheShdslLineStatusEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1
An entry (conceptual row) in the dsShdslLineStatusTable. The Table is indexed by ifIndex. The table will only be supported for interfaces of iftype sdsl (96)!
Status: current Access: not-accessible
OBJECT-TYPE    
  SheShdslLineStatusEntry  

sheShdslOpState 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.1
This object identifies the high level operational state for the STU.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslOpStateType  

sheShdslStartProgress 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.2
This object identifies the current detailed operational state of the STU.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslStartProgressType  

sheShdslFwRelease 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.3
Transceiver firmware release number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0|1)  

sheShdslLineSwap 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.4
This object indicates if the physical lines are swapped, i.e., logical channel A is connected to physical channel B. This applies to 4-wire operation only.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslLineSwapType  

sheShdslRmtCountryCode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.5
This object provides the country code word, as defined in ITU-T G.991.2, for the STU at the other end of the loop. GlobespanVirata sets this to USA.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1)  

sheShdslRmtEncoderA 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.6
This object identifies the 21-bit value corresponding to encoder coefficient A, as defined in ITU-T G.991.2, for the STU at the other end of the loop.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheShdslRmtEncoderB 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.7
This object identifies the 21-bit value corresponding to encoder coefficient B, as defined in ITU-T G.991.2, for the STU at the other end of the loop.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheShdslRmtProviderCode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.8
This object identifies the provider code word, as defined in ITU-T G.991.2, for the STU at the other end of the loop.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1)  

sheShdslLocDetect 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.9
This object is used to determine if carrier has been lost.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslTxPower 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.10
This object identifies the local STU transmit power in tenths of a dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslFramerSync 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.11
This object returns information regarding the framer synchronization status.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslFramerSyncType  

sheShdslRmtTomData 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.12
This object provides vendor-provided data, as defined in ITU-T G.991.2, for the STU at the other end of the loop.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslDriftAlarm 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.13
This object identifies if the receive clock is in or out of range.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslReceiverGain 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.14
This object provides the total receiver gain in dB.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslBertError 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.15
This object provides the count of bit errors since the last time the object was read, as well as the type of synchronization.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslBertErrorType  

sheShdslFramerOHAndDefects 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.16
This object returns overhead data. The four least significant bits contain the overhead data in the following format: bit 0 is losd, bit 1 is sega, bit 2 is ps, and bit 3 is segd.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

sheShdslRmtFwVersion 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.17
This object provides the transceiver firmware release number of the STU at the other end of the loop.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslUtopiaCellDelineation 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.18
This object indicates whether cell delineation has been found.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslUtopiaCellDelineationType  

sheShdslUtopiaRxCellCnt 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.19
This object indicates the number of UTOPIA cells received since the last time the object has been called. The maximum value is 0xFFFF.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

sheShdslUtopiaCellDropCnt 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.20
This object indicates the number of UTOPIA cells dropped since the last time the object has been called. The maximum value is 0xFF.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

sheShdslUtopiaRxHecErrorCnt 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.21
This object indicates the number of UTOPIA cells with HEC errors since the last time the object has been called. The maximum value is 0xFF.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

sheShdslUtopiaTxCellCnt 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.22
This object indicates the number of UTOPIA cells transmitted since the last time the object has been called. The maximum value is 0xFFFF.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

sheShdslRmtNsfCusId 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.23
This object returns the customer identification that was sent by the STU at the other end of the loop.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslRmtNsfCusData 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.24
This object returns non-standard format customer data that was sent by the STU at the other end of the loop.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..4)  

sheShdslLocalHandshake 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.25
This object provides a way to see what capabilities are supported by the local STU. A total of 26 handshake parameters are supported.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..52)  

sheShdslRemoteHandshake 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.26
This object provides a way to see what capabilities are supported by the STU at the other end of the loop. A total of 26 handshake parameters are supported.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..52)  

sheShdslActualHandshake 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.27
This object provides the results of capabilities exchanged during handshake. A total of 26 handshake parameters are supported.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..52)  

sheShdslRmtTxPower 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.28
This object provides the transmit power of the STU at the other end of the loop.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslRmtPowerBackoff 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.29
This object indicates whether power backoff is enabled or disabled at the STU at the other end of the loop.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslRmtPowerBackoffType  

sheShdslAutoRetrainCount 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.30
This object indicates the number of automatic retrains. This counter is only reset when a startup is initiated.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslEocState 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.31
This object provides status information about the eoc stage.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEocStateType  

sheShdslFramerOneSecondCnt 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.32
This object provides CRC, SEGA, and LOSW defect one second error counts, and should be called every second.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

sheShdslNtrFault 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.33
This object identifies the Network Timing Recovery Fault.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslNtrFaultType  

sheShdslCpeMasterCore 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.34
The CPE master Core.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslCpeMasterCoreType  

sheShdslParametricTestResult 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.35
Indicates the Result of the Parametric Test conducted on the Xcvr.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslParametricTestResultType  

sheShdslParametricTestArray 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.36
Conexant parameter that indicates the Parametric Test Array.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

sheShdslStartUpInfo 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.37
This conexant parameter indicates the startup mode, whether the lines comes up in bis mode or legacy mode (non bis).
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslStartUpInfoType  

sheShdslBisModeLocalHandshake 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.38
This conexant parameter provides a way to see what rates are supported by the local STU in the form of tuples.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..52)  

sheShdslBisModeRemoteHandshake 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.39
This conexant parameter provides a way to see what rates are supported by the STU at other end of the loop in the form of tuples.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..52)  

sheShdslBisModeActualHandshake 1.3.6.1.4.1.231.7.1.2.1.12.1.2.2.1.40
This conexant parametetr provides the results of rates exchanged during handshake in the form of tuples.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..52)  

sheShdslLineParamsTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3
This MO is proprietary extension of RFC 3276 MIB and contains the proprietary line parameters. The table will only be supported for interfaces of iftype sdsl (96)!
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheShdslLineParamsEntry

sheShdslLineParamsEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1
An entry (conceptual row) in the dsShdslLineParamsTable. The Table is indexed by ifIndex. The table will only be supported for interfaces of iftype sdsl (96)!
Status: current Access: not-accessible
OBJECT-TYPE    
  SheShdslLineParamsEntry  

sheShdslAction 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.1
This object specifies actions that are used to control transceiver operation.
Status: current Access: read-only
OBJECT-TYPE    
  SheSdslActionType  

sheShdslMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.2
This object specifies the operational mode of the transceiver.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslModeType  

sheShdslPowerScale 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.3
This object is used to compensate for minor differences in transmit power between designs.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslPowerScaleType  

sheShdslEncodeCoeffA 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.4
This object determines the value of encoder coefficient A, as defined in ITU-T G.991.2.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEncodeCoeffAType  

sheShdslEncodeCoeffB 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.5
This object determines the value of encoder coefficient B, as defined in ITU-T G.991.2
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEncodeCoeffBType  

sheShdslTxEOCBufferLen 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.6
This object determines the number of bytes of EOC data that is buffered by the DSP in the transmit direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 5..60  

sheShdslRxEOCBufferLen 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.7
This object determines the number of bytes of EOC data that is buffered by the DSP in the receive direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 5..60  

sheShdslNTR 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.8
This object defines how network-timing recovery is performed.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslNTRType  

sheShdslRxUpstreamFrameSync 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.9
Customer-defined value. This object defines the upstream frame sync word.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslRxDownstreamFrameSync 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.10
This object defines the downstream frame sync word.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslRxUpstreamStuffBits 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.11
Customer-defined value. This object defines the upstream.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslRxDownstreamStuffBits 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.12
This object defines the downstream stuff bits.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslInitiate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.13
This object defines which STU initiates a startup. The default is STU-R initiates and STU-C waits.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslInitiateType  

sheShdslFramerRxClockMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.14
This object determines the source of the receive clock.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslFramerRxClockModeType  

sheShdslFramerRxPllMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.15
This object enables or disables the internal PLL.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslSerialAtmCiuBufferSize 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.16
This object enables the user to set the size of the framer buffer for serial ATM operation.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslSerialAtmCiuBufferSizeType  

sheShdslTxFramerPulseDelay 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.17
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, a delay of up to 7 clock cycles can be specified for the transmit frame pulse.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheShdslRxFramerPulseDelay 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.18
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, a delay of up to 7 clock cycles can be specified for the receive frame pulse.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheShdslMultiFrameMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.19
This object specifies the multi frame operational mode of the transceiver.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslEnable4or6MbpsBitrate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.20
This object specifies the operational state of the 4_6Mbps bit rate.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslTomDataWord1 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.21
This object identifies one of four words of proprietary vendor data, as described in the Vendor Data section of ITU-T G.994.1.bis.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslTomDataWord2 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.22
This object identifies one of four words of proprietary vendor data, as described in the Vendor Data section of ITU-T G.994.1.bis.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslTomDataWord3 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.23
This object identifies one of four words of proprietary vendor data, as described in the Vendor Data section of ITU-T G.994.1.bis.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslTomDataWord4 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.24
This object identifies one of four words of proprietary vendor data, as described in the Vendor Data section of ITU-T G.994.1.bis.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslSetReqSilenceMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.25
This object enables a silent mode for the STU at the opposite end of the loop for approximately one minute. During the silent period, the STU that requested the silent mode could perform whatever operations it wants and the STU at the opposite end will remain in handshake.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslSetReqSilenceModeEnableType  

sheShdslSetIndividualRates1 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.26
This item enables the user to individually enable or disable base rates for N=1 through N=16. The default is all rates enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

sheShdslSetIndividualRates2 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.27
This item enables the user to individually enable or disable base rates for N=17 through N=32. The default is all rates enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

sheShdslSetIndividualRates3 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.28
This item enables the user to individually enable or disable base rates for N=33 through N=36. The default is all rates enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..15  

sheShdslSatmCellDelineation 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.29
This object enables the user to enable or disable cell delineation for serial ATM operation. This parameter should be set before a startup.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslFramerCellDropOnError 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.30
This object determines whether cells are dropped, i.e., not passed to the host, or not dropped, i.e., passed to the host. This object must be set prior to startup.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslGearShiftType 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.31
This object specifies the Gear Shift Type.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1  

sheShdslHsNsf 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.32
This object enables or disables nonstandard Information fields for MP, MS, CL, and CLR messages, as defined in ITU-T G.994.1.bis.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslHsMaxBitsPerBaud 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.33
This object specifies the maximum bit per baud.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslHsMaxBitsPerBaudType  

sheShdslHsCusId 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.34
This object identifies the customer identification during handshaking, as described in ITU-T G.994.1.bis.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslHsCusData0 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.35
This object identifies two words of customer data during handshaking, as defined in ITU-T G.994.1.bis.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslHsCusData1 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.36
This object identifies two words of customer data during handshaking, as defined in ITU-T G.994.1.bis.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslHsAnnexBType 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.37
This object allows the customer to choose between support for Annex B, Annex B with Access Network Frequency Plan (ANFP), or both.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslHsAnnexBType  

sheShdslAutoRetrain 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.38
Enables or disables auto-retrain.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslArCrcCheck 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.39
Enables or disables auto-retrain based on CRC errors.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslArFramerSyncCheck 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.40
Enables or disables auto-retrain based on framer synchronization.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslArSnrMarginCheck 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.41
Enables or disables auto-retrain based on whether the S/N margin falls below a preset threshold.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslArCrcThreshold 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.42
Sets the threshold for the number of frames with CRC errors for autoretrain.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1024  

sheShdslArSnrMarginThreshold 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.43
Set the margin threshold for autoretrain.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..6  

sheShdslArRetrainTime 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.44
Sets the time over which the autoretrain parameters must be outside their normal ranges, so that an auto-retrain occurs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

sheShdslOpStateTrapEnable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.45
Enables/disables trap indicating a change in op state.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableType  

sheShdslTxFrmrDataClkEdge 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.46
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, transmit data can be sampled upon either rising or falling edge of the transmit clock.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslClkEdgeType  

sheShdslRxFrmrDataClkEdge 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.47
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, receive data can be valid upon either rising or falling edge of the receive clock.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslClkEdgeType  

sheShdslTxFrmrPulseClkEdge 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.48
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, the transmit frame pulse can be active upon either rising or falling edge.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslClkEdgeType  

sheShdslRxFrmrPulseClkEdge 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.49
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, the transmit frame pulse can be active upon either rising or falling edge.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslClkEdgeType  

sheShdslTxFrmrPulseLvl 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.50
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, the transmit frame pulse can be either active high (1) or active low (0).
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslPulseLvlType  

sheShdslRxFrmrPulseLvl 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.51
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, the transmit frame pulse can be either active high (1) or active low (0).
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslPulseLvlType  

sheShdslFrmrOH 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.52
This object specifies framer OverHead Channel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

sheShdslLoopAttenCrossingTrapEnable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.53
This Parameter enables or disables the Trap for Loop Attenuation Threshold crossing.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableType  

sheShdslSNRMarginCrossingTrapEnable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.54
This Parameter enables or disables the Trap for SNR Margin Threshold crossing.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableType  

sheShdslFramerOHAndDefectsTrapEnable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.55
This Parameter enables or disables the Trap for Framer Overhead and Defects.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableType  

sheShdslParametricTestInputFile 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.56
Indicates Name of the Input file from which to take the Mask Array Size, lower and upper mask Array. Null string means no file is specified.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..56)  

sheShdslParamHybridLossTestStart 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.57
Indicates Start bin for range of bins to be measured. The default value mentioned is an indicative value only, for exact value refer to document number DO-400523-AN and DO-401163-AN.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

sheShdslParamHybridLossTestEnd 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.58
Indicates End bin for range of bins to be measured. The default value mentioned is an indicative value only.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

sheShdslFramerType 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.59
This object defines which type of data interface type is used. Note that the non-default values only apply to Conexant chips that support serial interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslFramerType  

sheShdslAFEType 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.60
This objects defines which AFE is being used.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslAFEType  

sheShdslUtopiaL2TxAddress 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.61
This object selects the appropriate UTOPIA Level 2 address for the transmit interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslUtopiaL2RxAddress 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.62
This object selects the appropriate UTOPIA Level 2 address for the receive interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslUtopiaDataBusWidth 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.63
This parameter is used to specify width of UTOPIA data bus.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslUtopiaDataBusWidthType  

sheShdslPAMMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.3.1.64
This parameter is used to configure the PAM mode value for startup.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslPAMModeType  

sheShdslLineParamsControl 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4
OBJECT IDENTIFIER    

sheShdslLineParamsControlRequest 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.1
modifyShdslLineParamsEntry a complete set of configurable parameters according the sheShdlsLinParamsControl-group.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslControlRequestType  

sheShdslLineParamsControlIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.2
Index of the modified entry.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

sheShdslLineParamsControlStatus 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheShdslLineParamsControlTimer 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheShdslLineParamsControlReqResult 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslControlRequestResultType  

sheShdslLineParamsControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlAction 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.7
Look at Table.
Status: current Access: read-write
OBJECT-TYPE    
  SheSdslActionType  

sheShdslLineParamsControlMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.8
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslModeType  

sheShdslLineParamsControlPowerScale 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.9
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlEncodeCoeffA 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.10
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEncodeCoeffAType  

sheShdslLineParamsControlEncodeCoeffB 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.11
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEncodeCoeffBType  

sheShdslLineParamsControlTxEOCBufferLen 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.12
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..60  

sheShdslLineParamsControlRxEOCBufferLen 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.13
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..60  

sheShdslLineParamsControlNTR 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.14
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslNTRType  

sheShdslLineParamsControlRxUpstreamFrameSync 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.15
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlRxDownstreamFrameSync 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.16
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlRxUpstreamStuffBits 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.17
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlRxDownstreamStuffBits 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.18
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlInitiate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.19
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslInitiateType  

sheShdslLineParamsControlFramerRxClockMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.20
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslFramerRxClockModeType  

sheShdslLineParamsControlFramerRxPllMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.21
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslLineParamsControlSerialAtmCiuBufferSize 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.22
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslSerialAtmCiuBufferSizeType  

sheShdslLineParamsControlTxFramerPulseDelay 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.23
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheShdslLineParamsControlRxFramerPulseDelay 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.24
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheShdslLineParamsControlMultiFrameMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.25
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslLineParamsControlEnable4or6MbpsBitrate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.26
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslLineParamsControlTomDataWord1 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.27
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlTomDataWord2 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.28
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlTomDataWord3 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.29
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlTomDataWord4 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.30
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlSetReqSilenceMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.31
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslSetReqSilenceModeEnableType  

sheShdslLineParamsControlSetIndividualRates1 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.32
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

sheShdslLineParamsControlSetIndividualRates2 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.33
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

sheShdslLineParamsControlSetIndividualRates3 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.34
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

sheShdslLineParamsControlSatmCellDelineation 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.35
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslLineParamsControlFramerCellDropOnError 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.36
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslLineParamsControlGearShiftType 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.37
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1  

sheShdslLineParamsControlHsNsf 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.38
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslLineParamsControlHsMaxBitsPerBaud 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.39
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslHsMaxBitsPerBaudType  

sheShdslLineParamsControlHsCusId 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.40
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlHsCusData0 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.41
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlHsCusData1 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.42
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheShdslLineParamsControlHsAnnexBType 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.43
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslHsAnnexBType  

sheShdslLineParamsControlAutoRetrain 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.44
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslLineParamsControlArCrcCheck 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.45
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslLineParamsControlArFramerSyncCheck 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.46
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslLineParamsControlArSnrMarginCheck 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.47
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableModeType  

sheShdslLineParamsControlArCrcThreshold 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.48
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1024  

sheShdslLineParamsControlArSnrMarginThreshold 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.49
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..6  

sheShdslLineParamsControlArRetrainTime 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.50
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

sheShdslLineParamsControlOpStateTrapEnable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.51
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableType  

sheShdslLineParamsControlTxFrmrDataClkEdge 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.52
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslClkEdgeType  

sheShdslLineParamsControlRxFrmrDataClkEdge 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.53
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslClkEdgeType  

sheShdslLineParamsControlTxFrmrPulseClkEdge 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.54
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslClkEdgeType  

sheShdslLineParamsControlRxFrmrPulseClkEdge 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.55
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslClkEdgeType  

sheShdslLineParamsControlTxFrmrPulseLvl 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.56
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslPulseLvlType  

sheShdslLineParamsControlRxFrmrPulseLvl 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.57
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslPulseLvlType  

sheShdslLineParamsControlFrmrOH 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.58
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

sheShdslLineParamsControlLoopAttenCrossingTrapEnable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.59
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableType  

sheShdslLineParamsControlSNRMarginCrossingTrapEnable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.60
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableType  

sheShdslLineParamsControlFramerOHAndDefectsTrapEnable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.61
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableType  

sheShdslLineParamsControlParametricTestInputFile 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.62
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..56)  

sheShdslLineParamsControlHybridLossTestStart 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.63
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

sheShdslLineParamsControlHybridLossTestEnd 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.64
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

sheShdslLineParamsControlPAMMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.4.65
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslPAMModeType  

sheShdslSpanStatusExtnTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.5
This table is a proprietary extension of hdsl2ShdslSpanStatusTable. The table will only be supported for interfaces of iftype sdsl (96)!
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheShdslSpanStatusExtnEntry

sheShdslSpanStatusExtnEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.5.1
An entry (conceptual row) in the dsShdslSpanStatusExtnTable. The Table is indexed by ifIndex. The table will only be supported for interfaces of iftype sdsl (96)!
Status: current Access: not-accessible
OBJECT-TYPE    
  SheShdslSpanStatusExtnEntry  

sheShdslStatusPMMSMaxLineRate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.5.1.1
This object provides the maximum PMMS rate the line is capable of achieving
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..11408000  

sheShdslStatus4WireHsMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.5.1.2
Contains the current 4 Wire Handshake Mode Configured
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslStatus4WireHsModeType  

sheShdslBondingGroupTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.6
This table contains a fixed set of possible bondig group entrys. This table will not longer be supported.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheShdslBondingGroupEntry

sheShdslBondingGroupEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.6.1
This table contains a fixed set of possible bondig group entrys. Index is the ifIndex from if-table (used iftype is 143 - msdsl - multirate sdsl). Entry will be created and deleted during card create or delete for a shdsl-card. For one shdsl card with 48 shdsl lines, this table will contain 24 groups of type twoPortsBondingGroup and 12 entrys of type fourPortsBondingGroup.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SheShdslBondingGroupEntry  

sheShdslBondingGroupBridgePortList 1.3.6.1.4.1.231.7.1.2.1.12.1.2.6.1.1
Portlist for all member of this bonding group. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4..8)  

sheShdslBondingGroupType 1.3.6.1.4.1.231.7.1.2.1.12.1.2.6.1.2
The type descripes if this group contain 2 or 4 shdsl - lines.
Status: obsolete Access: read-only
OBJECT-TYPE    
  SheShdslBondingGroupType  

shehdsl2ShdslMibObjects 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7
OBJECT IDENTIFIER    

shehdsl2ShdslSpanConfTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.1
This table supports overall configuration of HDSL2/SHDSL Spans. Entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Shehdsl2ShdslSpanConfEntry

shehdsl2ShdslSpanConfEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.1.1
An entry in the hdsl2ShdslSpanConfTable. Each entry represents the complete Span in a single SHDSL line. It is indexed by the ifIndex of the associated HDSL2/SHDSL line.
Status: current Access: not-accessible
OBJECT-TYPE    
  Shehdsl2ShdslSpanConfEntry  

shehdsl2ShdslSpanConfNumRepeaters 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.1.1.1
This object provisions the number of repeaters/regenerators in this HDSL2/SHDSL Span. The System will not support repeaters.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0  

shehdsl2ShdslSpanConfProfile 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.1.1.2
This object is a pointer to a span configuration profile in the hdsl2ShdslSpanConfProfileTable, which applies to this span. The value of this object is the index of the referenced profile in the hdsl2ShdslSpanConfProfileTable. Any attempt to set this object to a value that is not the value of the index for an active entry in the profile table, hdsl2ShdslSpanConfProfileTable, MUST be rejected.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

shehdsl2ShdslSpanConfAlarmProfile 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.1.1.3
This object is a pointer to an Alarm configuration profile in the hdsl2ShdslEndpointAlarmConfProfileTable. The value of this object is the index of the referenced profile in the hdsl2ShdslEndpointAlarmConfProfileTable. The alarm threshold configuration in the referenced profile will be used by default for all segment endpoints in this span. Individual endpoints may override this profile by explicitly specifying some other profile in the hdsl2ShdslEndpointConfTable. By default, this object will have the value 'DEFVAL' (the index of the default profile). Any attempt to set this object to a value that is not the value of the index for an active entry in the profile table, hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

shehdsl2ShdslSpanConfControl 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.2
OBJECT IDENTIFIER    

shehdsl2ShdslSpanConfControlRequest 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.2.1
modifyshehdsl2ShdslSpanConfEntry shehdsl2ShdslSpanConfControlNumRepeaters shehdsl2ShdslSpanConfControlProfile modifyshehdsl2ShdslSpanConfEntryAlarmProfile shehdsl2ShdslSpanConfControlAlarmProfile
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslControlRequestType  

shehdsl2ShdslSpanConfControlIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.2.2
Index of the modified entry.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

shehdsl2ShdslSpanConfControlStatus 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.2.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

shehdsl2ShdslSpanConfControlTimer 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.2.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

shehdsl2ShdslSpanConfControlReqResult 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslControlRequestResultType  

shehdsl2ShdslSpanConfControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.2.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

shehdsl2ShdslSpanConfControlNumRepeaters 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.2.7
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0  

shehdsl2ShdslSpanConfControlProfile 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.2.8
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

shehdsl2ShdslSpanConfControlAlarmProfile 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.2.9
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

shehdsl2ShdslSpanStatusTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.3
This table provides overall status information of HDSL2/SHDSL spans. This table contains live data from equipment. As such, it is NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Shehdsl2ShdslSpanStatusEntry

shehdsl2ShdslSpanStatusEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.3.1
An entry in the hdsl2ShdslSpanStatusTable. Each entry represents the complete span in a single HDSL2/SHDSL line. It is indexed by the ifIndex of the associated HDSL2/SHDSL line.
Status: current Access: not-accessible
OBJECT-TYPE    
  Shehdsl2ShdslSpanStatusEntry  

shehdsl2ShdslStatusNumAvailRepeaters 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.3.1.1
Contains the actual number of repeaters/regenerators discovered in this HDSL2/SHDSL span.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..8  

shehdsl2ShdslStatusMaxAttainableLineRate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.3.1.2
Contains the maximum attainable line rate in this HDSL2/SHDSL span. This object provides the maximum rate the line is capable of achieving. This is based upon measurements made during line probing. This rate includes payload (user data) and any applicable framing overhead.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..11408000  

shehdsl2ShdslStatusActualLineRate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.3.1.3
Contains the actual line rate in this HDSL2/SHDSL span. This should equal ifSpeed. This rate includes payload (user data) and any applicable framing overhead.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..11408000  

shehdsl2ShdslStatusTransmissionModeCurrent 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.3.1.4
Contains the current Power Spectral Density (PSD) regional setting of the HDSL2/SHDSL span. Bit Meaning Description 1 region 1 Indicates ITU-T G.991.2 Annex A/F. 2 region 2 Indicates ITU-T G.991.2 Annex B/G.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslTransmissionModeType  

sheShdslStatusMaxAttainablePayloadRate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.3.1.5
This parameter contains the maximum attainable payload rate in this SHDSL span. This is based upon measurements made during line probing without including any framing overhead.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..11408000  

sheShdslStatusActualPayloadRate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.3.1.6
This parameter contains the actual payload rate in this SHDSL span. This is based upon measurements made during line probing without including any framing overhead.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..11408000  

sheShdslSpanStatusPAMModulation 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.3.1.7
The parameter show the selected PAM constellation is to be used. - SELECT_16_PAM - Use 16 PAM only - SELECT_32_PAM - Use 32 PAM only Select 16Pam limits the data rates from 192 kbps to 3840 kbps Select 32Pam limits the data rates from 768 kbps to 5696 kbps This is propietary extension for interfaces of type shdsl (169) only.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslPAMModeType  

shehdsl2ShdslInventoryTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4
This table supports retrieval of unit inventory information available via the EOC from units in a HDSL2/SHDSL line. Entries in this table are dynamically created during the line discovery process. The life cycle for these entries is as follows: - xtu discovers a device, either a far-end xtu or an xru - an inventory table entry is created for the device - the line goes down for whatever reason - inventory table entries for unreachable devices are destroyed. As these entries are created/destroyed dynamically, they are NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Shehdsl2ShdslInventoryEntry

shehdsl2ShdslInventoryEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1
An entry in the hdsl2ShdslInventoryTable. Each entry represents inventory information for a single unit in a HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line and the Hdsl2ShdslUnitId of the associated unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Shehdsl2ShdslInventoryEntry  

shehdsl2ShdslInvIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1.1
Each entry in this table corresponds to a physical element in a HDSL2/SHDSL Span. It is based on the EOC unit addressing scheme with reference to the xtuC.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheHdsl2ShdslUnitId  

shehdsl2ShdslInvVendorID 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1.2
Vendor ID as reported in an Inventory Response message.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

shehdsl2ShdslInvVendorModelNumber 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1.3
Vendor model number as reported in an Inventory Response message.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(12)  

shehdsl2ShdslInvVendorSerialNumber 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1.4
Vendor serial number as reported in an Inventory Response message.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(12)  

shehdsl2ShdslInvVendorEOCSoftwareVersion 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1.5
Vendor EOC version as reported in a Discovery Response message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

shehdsl2ShdslInvStandardVersion 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1.6
Version of the HDSL2/SHDSL standard implemented, as reported in an Inventory Response message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

shehdsl2ShdslInvVendorListNumber 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1.7
Vendor list number as reported in an Inventory Response message.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

shehdsl2ShdslInvVendorIssueNumber 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1.8
Vendor issue number as reported in an Inventory Response message.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

shehdsl2ShdslInvVendorSoftwareVersion 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1.9
Vendor software version as reported in an Inventory Response message.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

shehdsl2ShdslInvEquipmentCode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1.10
Equipment code conforming to ANSI T1.213, Coded Identification of Equipment Entities.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(10)  

shehdsl2ShdslInvVendorOther 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1.11
Other vendor information as reported in an Inventory Response message.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(12)  

shehdsl2ShdslInvTransmissionModeCapability 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.4.1.12
Contains the transmission mode capability of the SHDSL unit. Bit Meaning Description 1 region 1 Indicates ITU-T G.991.2 Annex A/F. 2 region 2 Indicates ITU-T G.991.2 Annex B/G.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslTransmissionModeType  

shehdsl2ShdslEndpointConfTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.5
This table supports configuration parameters for segment endpoints in a HDSL2/SHDSL line. As this table is indexed by ifIndex, it MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Shehdsl2ShdslEndpointConfEntry

shehdsl2ShdslEndpointConfEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.5.1
An entry in the hdsl2ShdslEndpointConfTable. Each entry represents a single segment endpoint in a HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, the side of the unit, and the wire-pair of the associated modem.
Status: current Access: not-accessible
OBJECT-TYPE    
  Shehdsl2ShdslEndpointConfEntry  

shehdsl2ShdslEndpointSide 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.5.1.1
The side of the unit associated with this segment endpoint - Network/Customer side - as per the Hdsl2ShdslUnitSide textual convention.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheHdsl2ShdslUnitSide  

shehdsl2ShdslEndpointWirePair 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.5.1.2
The wire-pair of the modem associated with this segment endpoint as per the Hdsl2ShdslWirePair textual convention. wirePair1(1), -> two wire wirePair2(2), -> four wire wirePair3(3), -> six wire wirePair4(4) -> eight wire
Status: current Access: not-accessible
OBJECT-TYPE    
  SheHdsl2ShdslWirePair  

shehdsl2ShdslEndpointAlarmConfProfile 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.5.1.3
This object configures the alarm threshold values to be used for this segment endpoint. The values are obtained from the alarm configuration profile referenced by this object. The value of this object is the index of the referenced profile in the hdsl2ShdslEndpointAlarmConfProfileTable, or NULL (a zero- length SnmpAdminString). If the value is a zero-length SnmpAdminString, the endpoint uses the default Alarm Configuration Profile for the associated span as per the hdsl2ShdslSpanConfAlarmProfile object in the hdsl2ShdslSpanConfTable. The default value of this object is a zero-length SnmpAdminString. Any attempt to set this object to a value that is not the value of the index for an active entry in the profile table, hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

shehdsl2ShdslEndpointConfControl 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.6
OBJECT IDENTIFIER    

shehdsl2ShdslEndpointConfControlRequest 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.6.1
modifyshehdsl2ShdslEndpointConfEntry
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslControlRequestType  

shehdsl2ShdslEndpointConfControlIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.6.2
First key for the modified entry. IfIndex of line.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

shehdsl2ShdslEndpointConfControlStatus 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.6.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

shehdsl2ShdslEndpointConfControlTimer 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.6.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

shehdsl2ShdslEndpointConfControlReqResult 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.6.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslControlRequestResultType  

shehdsl2ShdslEndpointConfControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.6.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

shehdsl2ShdslEndpointConfControlInvIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.6.7
Second key for modified entry.
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslUnitId  

shehdsl2ShdslEndpointConfControlSide 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.6.8
Third key for the modified entry.
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslUnitSide  

shehdsl2ShdslEndpointConfControlWirePair 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.6.9
Forth key for the modified entry.
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslWirePair  

shehdsl2ShdslEndpointConfControlAlarmProfile 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.6.10
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

shehdsl2ShdslEndpointCurrTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7
This table contains current status and performance information for segment endpoints in HDSL2/SHDSL Lines. As with other tables in this MIB indexed by ifIndex, entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Shehdsl2ShdslEndpointCurrEntry

shehdsl2ShdslEndpointCurrEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1
An entry in the hdsl2ShdslEndpointCurrTable. Each entry contains status and performance information relating to a single segment endpoint. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, the side of the unit, and the wire-pair of the associated modem.
Status: current Access: not-accessible
OBJECT-TYPE    
  Shehdsl2ShdslEndpointCurrEntry  

shehdsl2ShdslEndpointCurrAtn 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.1
The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -127..128  

shehdsl2ShdslEndpointCurrSnrMgn 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.2
The current SNR margin for this endpoint as reported in a Status Response/SNR message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -127..128  

shehdsl2ShdslEndpointCurrStatus 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.3
Contains the current state of the endpoint. This is a bitmap of possible conditions. The various bit positions are: noDefect There no defects on the line. powerBackoff Indicates enhanced Power Backoff. deviceFault Indicates a vendor-dependent diagnostic or self-test fault has been detected. dcContinuityFault Indicates vendor-dependent conditions that interfere with span powering such as short and open circuits. snrMarginAlarm Indicates that the SNR margin has dropped below the alarm threshold. loopAttenuationAlarm Indicates that the loop attenuation exceeds the alarm threshold. loswFailureAlarm Indicates a forward LOSW alarm. configInitFailure Endpoint failure during initialization due to paired endpoint not able to support requested configuration. protocolInitFailure Endpoint failure during initialization due to incompatible protocol used by the paired endpoint. noNeighborPresent Endpoint failure during initialization due to no activation sequence detected from paired endpoint. loopbackActive A loopback is currently active at this Segment Endpoint. This is intended to supplement ifOperStatus. Note that there is a 1-1 relationship between the status bits defined in this object and the notification thresholds defined elsewhere in this MIB.
Status: current Access: read-only
OBJECT-TYPE    
  Shehdsl2ShdslEndpointCurrStatusType  

shehdsl2ShdslEndpointES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.4
Count of Errored Seconds (ES) on this endpoint since the xU was last restarted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

shehdsl2ShdslEndpointSES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.5
Count of Severely Errored Seconds (SES) on this endpoint since the xU was last restarted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

shehdsl2ShdslEndpointCRCanomalies 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.6
Count of CRC anomalies on this endpoint since the xU was last restarted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

shehdsl2ShdslEndpointLOSWS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.7
Count of Loss of Sync Word (LOSW) Seconds on this endpoint since the xU was last restarted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

shehdsl2ShdslEndpointUAS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.8
Count of Unavailable Seconds (UAS) on this endpoint since the xU was last restarted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

shehdsl2ShdslEndpointCurr15MinTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.9
Total elapsed seconds in the current 15-minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslPerfTimeElapsed  

shehdsl2ShdslEndpointCurr15MinES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.10
Count of Errored Seconds (ES) in the current 15-minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

shehdsl2ShdslEndpointCurr15MinSES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.11
Count of Severely Errored Seconds (SES) in the current 15-minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

shehdsl2ShdslEndpointCurr15MinCRCanomalies 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.12
Count of CRC anomalies in the current 15-minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

shehdsl2ShdslEndpointCurr15MinLOSWS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.13
Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

shehdsl2ShdslEndpointCurr15MinUAS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.14
Count of Unavailable Seconds (UAS) in the current 15-minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

shehdsl2ShdslEndpointCurr1DayTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.15
Number of seconds that have elapsed since the beginning of the current 1-day interval.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslPerfTimeElapsed  

shehdsl2ShdslEndpointCurr1DayES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.16
Count of Errored Seconds (ES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslPerfCurrDayCount  

shehdsl2ShdslEndpointCurr1DaySES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.17
Count of Severely Errored Seconds (SES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslPerfCurrDayCount  

shehdsl2ShdslEndpointCurr1DayCRCanomalies 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.18
Count of CRC anomalies during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslPerfCurrDayCount  

shehdsl2ShdslEndpointCurr1DayLOSWS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.19
Count of Loss of Sync Word (LOSW) Seconds during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslPerfCurrDayCount  

shehdsl2ShdslEndpointCurr1DayUAS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.20
Count of Unavailable Seconds (UAS) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslPerfCurrDayCount  

shehdsl2ShdslEndpointCurrTipRingReversal 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.21
This object indicates the state of the tip/ring for the wire pair. normal(1), reversed(2)
Status: current Access: read-only
OBJECT-TYPE    
  Shehdsl2ShdslMaintTipRingReversalType  

shehdsl2ShdslEndpointCurrActivationState 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.7.1.22
This object indicates the activation or training state of the wire pair. preActivation(1), -> PreTrain activation(2), -> Training data(3) -> Trained
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslActivationStateType  

shehdsl2Shdsl15MinIntervalTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.8
This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Shehdsl2Shdsl15MinIntervalEntry

shehdsl2Shdsl15MinIntervalEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.8.1
An entry in the hdsl2Shdsl15MinIntervalTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Shehdsl2Shdsl15MinIntervalEntry  

shehdsl2Shdsl15MinIntervalNumber 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.8.1.1
Performance Data Interval number. 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..96  

shehdsl2Shdsl15MinIntervalEndTime 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.8.1.2
This variable indicates the time of storing this interval.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

shehdsl2Shdsl15MinIntervalES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.8.1.3
Count of Errored Seconds (ES) during the interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

shehdsl2Shdsl15MinIntervalSES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.8.1.4
Count of Severely Errored Seconds (SES) during the interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

shehdsl2Shdsl15MinIntervalCRCanomalies 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.8.1.5
Count of CRC anomalies during the interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

shehdsl2Shdsl15MinIntervalLOSWS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.8.1.6
Count of Loss of Sync Word (LOSW) Seconds during the interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

shehdsl2Shdsl15MinIntervalUAS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.8.1.7
Count of Unavailable Seconds (UAS) during the interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

shehdsl2Shdsl1DayIntervalTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.9
This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Shehdsl2Shdsl1DayIntervalEntry

shehdsl2Shdsl1DayIntervalEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.9.1
An entry in the hdsl2Shdsl1DayIntervalTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Shehdsl2Shdsl1DayIntervalEntry  

shehdsl2Shdsl1DayIntervalNumber 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.9.1.1
History Data Interval number. Interval 1 is the the most recent previous day; interval 30 is 30 days ago. Intervals 2..30 are optional.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..30  

shehdsl2Shdsl1DayIntervalEndTime 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.9.1.2
This variable indicates the time of storing this interval.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

shehdsl2Shdsl1DayIntervalMoniSecs 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.9.1.3
The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslPerfTimeElapsed  

shehdsl2Shdsl1DayIntervalES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.9.1.4
Count of Errored Seconds (ES) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2Shdsl1DayIntervalCount  

shehdsl2Shdsl1DayIntervalSES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.9.1.5
Count of Severely Errored Seconds (SES) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2Shdsl1DayIntervalCount  

shehdsl2Shdsl1DayIntervalCRCanomalies 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.9.1.6
Count of CRC anomalies during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2Shdsl1DayIntervalCount  

shehdsl2Shdsl1DayIntervalLOSWS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.9.1.7
Count of Loss of Sync Word (LOSW) Seconds during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2Shdsl1DayIntervalCount  

shehdsl2Shdsl1DayIntervalUAS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.9.1.8
Count of Unavailable Seconds (UAS) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2Shdsl1DayIntervalCount  

shehdsl2ShdslEndpointMaintTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.10
This table supports maintenance operations (eg. loopbacks) to be performed on HDSL2/SHDSL segment endpoints. This table contains live data from equipment. As such, it is NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Shehdsl2ShdslEndpointMaintEntry

shehdsl2ShdslEndpointMaintEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.10.1
An entry in the hdsl2ShdslEndpointMaintTable. Each entry corresponds to a single segment endpoint, and is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit and the side of the unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Shehdsl2ShdslEndpointMaintEntry  

shehdsl2ShdslMaintLoopbackConfig 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.10.1.1
This object controls configuration of loopbacks for the associated segment endpoint. The status of the loopback is obtained via the hdsl2ShdslEndpointCurrStatus object. noLoopback(1), normalLoopback(2) is available for STU-C and STU-R. specialLoopback(3), normalLoopbackEocId9(8), specialLoopbackEocId9(9) are only available for STU-R. digitalLoopback(4) analogLoopback(5) interfaceLoopBack(6) localFramerLoopback(7) are only available for STU-C. Loopmode 2 and 3 are standard defined. All other modes are proprietary and not supported by all lines.
Status: current Access: read-only
OBJECT-TYPE    
  Shehdsl2ShdslMaintLoopbackConfigType  

shehdsl2ShdslMaintTipRingReversal 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.10.1.2
This object indicates the state of the tip/ring pair at the associated segment endpoint. normal(1), reversed(2)
Status: current Access: read-only
OBJECT-TYPE    
  Shehdsl2ShdslMaintTipRingReversalType  

shehdsl2ShdslMaintPowerBackOff 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.10.1.3
This object configures the receiver at the associated segment endpoint to operate in default or enhanced power backoff mode. default(1), enhanced(2) is actual not supported for STU-C disable(3) is actual not supported for STU-R
Status: current Access: read-only
OBJECT-TYPE    
  Shehdsl2ShdslMaintPowerBackOffType  

shehdsl2ShdslMaintSoftRestart 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.10.1.4
This object enables the manager to trigger a soft restart of the modem at the associated segment endpoint. The manager may only set this object to the 'restart(2)' value, which initiates a restart. The agent will perform a restart after approximately 5 seconds. Following the 5 second period, the agent will restore the object to the 'ready(1)' state.
Status: current Access: read-only
OBJECT-TYPE    
  Shehdsl2ShdslMaintSoftRestartType  

shehdsl2ShdslEndpointMaintControl 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.11
OBJECT IDENTIFIER    

shehdsl2ShdslEndpointMaintControlRequest 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.11.1
modifyshehdsl2ShdslEndpointMaintEntry
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslControlRequestType  

shehdsl2ShdslEndpointMaintControlIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.11.2
First key for the modified entry. IfIndex of line.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

shehdsl2ShdslEndpointMaintControlStatus 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.11.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

shehdsl2ShdslEndpointMaintControlTimer 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.11.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

shehdsl2ShdslEndpointMaintControlReqResult 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.11.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslControlRequestResultType  

shehdsl2ShdslEndpointMaintControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.11.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

shehdsl2ShdslEndpointMaintControlInvIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.11.7
Second key for modified entry.
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslUnitId  

shehdsl2ShdslEndpointMaintControlSide 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.11.8
Third key for the modified entry.
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslUnitSide  

shehdsl2ShdslEndpointMaintControlLoopbackConfig 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.11.9
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Shehdsl2ShdslMaintLoopbackConfigType  

shehdsl2ShdslEndpointMaintControlPowerBackOff 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.11.10
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Shehdsl2ShdslMaintPowerBackOffType  

shehdsl2ShdslEndpointMaintControlSoftRestart 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.11.11
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Shehdsl2ShdslMaintSoftRestartType  

shehdsl2ShdslUnitMaintTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.12
This table supports maintenance operations for units in a HDSL2/SHDSL line. Entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Shehdsl2ShdslUnitMaintEntry

shehdsl2ShdslUnitMaintEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.12.1
An entry in the hdsl2ShdslUnitMaintTable. Each entry corresponds to a single unit, and is indexed by the ifIndex of the HDSL2/SHDSL line and the UnitId of the associated unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Shehdsl2ShdslUnitMaintEntry  

shehdsl2ShdslMaintLoopbackTimeout 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.12.1.1
This object configures the timeout value for loopbacks initiated at segments endpoints contained in the associated unit. A value of 0 disables the timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4095  

shehdsl2ShdslMaintUnitPowerSource 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.12.1.2
This object indicates the DC power source being used by the associated unit. local(1), span(2)
Status: current Access: read-only
OBJECT-TYPE    
  Shehdsl2ShdslMaintUnitPowerSourceType  

shehdsl2ShdslUnitMaintControl 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.13
OBJECT IDENTIFIER    

shehdsl2ShdslUnitMaintControlRequest 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.13.1
modifyshehdsl2ShdslUnitMaintEntry
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslControlRequestType  

shehdsl2ShdslUnitMaintControlIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.13.2
First key for the modified entry. IfIndex of line.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

shehdsl2ShdslUnitMaintControlStatus 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.13.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

shehdsl2ShdslUnitMaintControlTimer 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.13.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

shehdsl2ShdslUnitMaintControlReqResult 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.13.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslControlRequestResultType  

shehdsl2ShdslUnitMaintControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.13.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

shehdsl2ShdslUnitMaintControlInvIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.13.7
Second key for modified entry.
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslUnitId  

shehdsl2ShdslUnitMaintControlLoopbackTimeout 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.13.8
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4095  

shehdsl2ShdslSpanConfProfileTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14
This table supports definitions of span configuration profiles for SHDSL lines. HDSL2 does not support these configuration options. This table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Shehdsl2ShdslSpanConfProfileEntry

shehdsl2ShdslSpanConfProfileEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1
Each entry corresponds to a single span configuration profile. Each profile contains a set of span configuration parameters. The configuration parameters in a profile are applied to those lines referencing that profile (see the hdsl2ShdslSpanConfProfile object). If an active entry is referenced in hdsl2ShdslSpanConfProfile, the entry MUST remain active until all references are removed.
Status: current Access: not-accessible
OBJECT-TYPE    
  Shehdsl2ShdslSpanConfProfileEntry  

shehdsl2ShdslSpanConfProfileIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.1
A free running index for this table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..64  

shehdsl2ShdslSpanConfProfileName 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.2
This object is the unique index associated with this profile. Entries in this table are referenced via the object hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanConfEntry. This characters are not allowed: space : ?
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

shehdsl2ShdslSpanConfWireInterface 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.3
This object configures the wire-interface operation for SHDSL Lines. twoWire(1), fourWire(2), fourWireBitInterleaved(3), fourWireByteInterleaveEnhanced(4), fourWireBitInterleaveEnhanced(5), sixWire(6), eightWire(7) Interfaces of type sdsl (96) support modes 1..5 and mode 3..5 are proprietary! Interfaces of type shdsl (169) will support mode 1..2 and 6..7!
Status: current Access: read-only
OBJECT-TYPE    
  Shehdsl2ShdslSpanConfWireInterfaceType  

shehdsl2ShdslSpanConfMinLineRate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.4
This object configures the minimum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line rate (hdsl2ShdslSpanMaxLineRate), the line rate is considered 'fixed'. If the minimum line rate is less than the maximum line rate, the line rate is considered 'rate-adaptive'. The minimum linerate should never be higher then the maximum linerate. Note: Technical usefull minium and maximum values depend on the configured WireInterface mode: twoWire mode -> minimum should be 200 kBits -> maximum should be 5704 kBits fourWire mode -> minimum should be 400 kBits -> maximum should be 11408 kBits sixWire mode -> minimum should be 600 kBits -> maximum should be 17112 kBits eigthWire mode -> minimum should be 800 kBits -> maximum should be 22816 kBits
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..22816000  

shehdsl2ShdslSpanConfMaxLineRate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.5
This object configures the maximum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line rate (hdsl2ShdslSpanMaxLineRate), the line rate is considered 'fixed'. If the minimum line rate is less than the maximum line rate, the line rate is considered 'rate-adaptive'. The maximum linerate should never be less then the minimum linerate. Note: Technical usefull minium and maximum values depend on the configured WireInterface mode: twoWire mode -> minimum should be 200 kBits -> maximum should be 5704 kBits fourWire mode -> minimum should be 400 kBits -> maximum should be 11408 kBits sixWire mode -> minimum should be 600 kBits -> maximum should be 17112 kBits eigthWire mode -> minimum should be 800 kBits -> maximum should be 22816 kBits
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..22816000  

shehdsl2ShdslSpanConfPSD 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.6
This object configures use of symmetric/asymmetric PSD (Power Spectral Density) Mask for the associated SHDSL Line. Support for symmetric PSD is mandatory for all supported data rates. Support for asymmetric PSD is optional. symmetric(1), asymmetric(2), r1Asymmetric(3), r2Asymmetric(4) Mode 3..4 are propietary and only supported by interfaces of type sdsl (96).
Status: current Access: read-only
OBJECT-TYPE    
  Shehdsl2ShdslSpanConfPSDType  

shehdsl2ShdslSpanConfTransmissionMode 0.1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.7
This object specifies the regional setting for the SHDSL line. Minimum of one bit should always be set! Bit Meaning Description 1 region 1 Indicates ITU-T G.991.2 Annex A/F. 2 region 2 Indicates ITU-T G.991.2 Annex B/G.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslTransmissionModeType  

shehdsl2ShdslSpanConfRemoteEnabled 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.8
This object enables/disables support for remote management of the units in a SHDSL line from the STU-R via the EOC. enabled(1), disabled(2)
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslEnableType  

shehdsl2ShdslSpanConfPowerFeeding 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.9
This object enables/disables support for optional power feeding in a SHDSL line. noPower(1), powerFeed(2), wettingCurrent(3)
Status: current Access: read-only
OBJECT-TYPE    
  Shehdsl2ShdslSpanConfPowerFeedingType  

shehdsl2ShdslSpanConfCurrCondTargetMarginDown 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.10
This object specifies the downstream current condition target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -10..21  

shehdsl2ShdslSpanConfWorstCaseTargetMarginDown 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.11
This object specifies the downstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -10..21  

shehdsl2ShdslSpanConfCurrCondTargetMarginUp 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.12
This object specifies the upstream current condition target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -10..21  

shehdsl2ShdslSpanConfWorstCaseTargetMarginUp 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.13
This object specifies the upstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -10..21  

shehdsl2ShdslSpanConfUsedTargetMargins 0.1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.14
Contains indicates whether a target SNR margin is enabled or disabled. This is a bit-map of possible settings. Minimum of one bit should always be set! The various bit positions are: currCondDown current condition downstream target SNR margin enabled worstCaseDown worst case downstream target SNR margin enabled currCondUp current condition upstream target SNR margin enabled worstCaseUp worst case upstream target SNR margin enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Shehdsl2ShdslSpanConfUsedTargetMarginsType  

shehdsl2ShdslSpanConfReferenceClock 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.15
This object configures the clock reference for the STU-C in a SHDSL Line. Note: Interfaces of type sdsl (96) support only value localClk(1). Interfaces of type shdsl (169) support also the mode networkClk(2).
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslClockReferenceType  

shehdsl2ShdslSpanConfLineProbeEnable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.16
This object enables/disables support for Line Probe of the units in a SHDSL line. When Line Probe is enabled, the system performs Line Probing to find the best possible rate. If Line probe is disabled, the rate adaptation phase is skipped to shorten set up time. disable(1), enable(2)
Status: current Access: read-only
OBJECT-TYPE    
  Shehdsl2ShdslSpanConfLineProbeEnableType  

shehdsl2ShdslSpanConfPAMConstellation 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.17
The parameter allows the selection of which PAM constellation is to be used. - AUTO_PAM_SELECT - Automatic PAM selection - SELECT_16_PAM - Use 16 PAM only - SELECT_32_PAM - Use 32 PAM only Select 16Pam limits the data rates from 192 kbps to 3840 kbps Select 32Pam limits the data rates from 768 kbps to 5696 kbps +a--------------------------------------------------------+ | Soc4e-Dsl-API : SHDSL_LineTcPamSelModeGet | +---------------------------------------------------------+ | SHDSL_TcPamSelMode_t * pMode | | pointer to store current TC-PAM selection mode | ++--------------------------------------------------------+ | extented | +---------------------------------------------------------+ This is propietary extension for interfaces of type shdsl (169) only.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslPAMModeType  

shehdsl2ShdslSpanConfTCLayerSupported 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.14.1.18
Specifies the TC-Layer. Set fix to 80)/ DSL_TC_ATM. (0) - DSL_TC_ATM (1) - DSL_TC_EFM (2) - DSL_TC_HDLC +a--------------------------------------------------------+ | Soc4e-Dsl-API : DSL_SystemInterfaceConfigGet | +---------------------------------------------------------+ | DSL_SystemInterfaceConfig_t * pData | | DSL_TcLayerSelection_t | +d--------------------------------------------------------+ | Soc4e-Drv-Cmd : ACK_PMD_EndpointAlarmConfig | +x--------------------------------------------------------+ | sics | +---------------------------------------------------------+ This is propietary extension for interfaces of type shdsl (169) only.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslTCLayerType  

shehdsl2ShdslSpanConfProfileControl 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15
OBJECT IDENTIFIER    

shehdsl2ShdslSpanConfProfileControlRequest 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.1
createshehdsl2ShdslSpanConfProfile modifyshehdsl2ShdslSpanConfProfile deleteshehdsl2ShdslSpanConfProfile
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslControlRequestType  

shehdsl2ShdslSpanConfProfileControlIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.2
Key for the modified or deleted entry. NE will choose this number during create.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..64  

shehdsl2ShdslSpanConfProfileControlStatus 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

shehdsl2ShdslSpanConfProfileControlTimer 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

shehdsl2ShdslSpanConfProfileControlReqResult 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslControlRequestResultType  

shehdsl2ShdslSpanConfProfileControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

shehdsl2ShdslSpanConfProfileControlProfileName 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.7
Name for new profile.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

shehdsl2ShdslSpanConfProfileControlWireInterface 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.8
Look at table. twoWire(1), fourWire(2), fourWireBitInterleaved(3), fourWireByteInterleaveEnhanced(4), fourWireBitInterleaveEnhanced(5), sixWire(6), eightWire(7) Interfaces of type sdsl (96) support modes 1..5 and mode 3..5 are proprietary! Interfaces of type shdsl (169) will support mode 1..2 and 6..7!
Status: current Access: read-write
OBJECT-TYPE    
  Shehdsl2ShdslSpanConfWireInterfaceType  

shehdsl2ShdslSpanConfProfileControlMinLineRate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.9
Look at table. Note: Technical usefull minium and maximum values depend on the configured WireInterface mode: twoWire mode -> minimum should be 200 kBits -> maximum should be 5704 kBits fourWire mode -> minimum should be 400 kBits -> maximum should be 11408 kBits sixWire mode -> minimum should be 600 kBits -> maximum should be 17112 kBits eigthWire mode -> minimum should be 800 kBits -> maximum should be 22816 kBits
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..22816000  

shehdsl2ShdslSpanConfProfileControlMaxLineRate 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.10
Look at table. Note: Technical usefull minium and maximum values depend on the configured WireInterface mode: twoWire mode -> minimum should be 200 kBits -> maximum should be 5704 kBits fourWire mode -> minimum should be 400 kBits -> maximum should be 11408 kBits sixWire mode -> minimum should be 600 kBits -> maximum should be 17112 kBits eigthWire mode -> minimum should be 800 kBits -> maximum should be 22816 kBits
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..22816000  

shehdsl2ShdslSpanConfProfileControlPSD 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.11
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Shehdsl2ShdslSpanConfPSDType  

shehdsl2ShdslSpanConfProfileControlTransmissionMode 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.12
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslTransmissionModeType  

shehdsl2ShdslSpanConfProfileControlRemoteEnabled 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.13
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslEnableType  

shehdsl2ShdslSpanConfProfileControlPowerFeeding 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.14
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Shehdsl2ShdslSpanConfPowerFeedingType  

shehdsl2ShdslSpanConfProfileControlCurrCondTargetMarginDown 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.15
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -10..21  

shehdsl2ShdslSpanConfProfileControlWorstCaseTargetMarginDown 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.16
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -10..21  

shehdsl2ShdslSpanConfProfileControlCurrCondTargetMarginUp 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.17
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -10..21  

shehdsl2ShdslSpanConfProfileControlWorstCaseTargetMarginUp 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.18
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -10..21  

shehdsl2ShdslSpanConfProfileControlUsedTargetMargins 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.19
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Shehdsl2ShdslSpanConfUsedTargetMarginsType  

shehdsl2ShdslSpanConfProfileControlReferenceClock 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.20
Look at table. Note: Interfaces of type sdsl (96) support only value localClk(1). Interfaces of type shdsl (169) support also the mode networkClk(2).
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslClockReferenceType  

shehdsl2ShdslSpanConfProfileControlLineProbeEnable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.21
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Shehdsl2ShdslSpanConfLineProbeEnableType  

shehdsl2ShdslSpanConfProfileControlPAMConstellation 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.22
Look at table. This is propietary extension for interfaces of type shdsl (169) only.
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslPAMModeType  

shehdsl2ShdslSpanConfProfileControlTCLayerSupported 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.15.23
Look at table. This is propietary extension for interfaces of type shdsl (169) only.
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslTCLayerType  

shehdsl2ShdslEndpointAlarmConfProfileTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.16
This table supports definitions of alarm configuration profiles for HDSL2/SHDSL segment endpoints. This table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Shehdsl2ShdslEndpointAlarmConfProfileEntry

shehdsl2ShdslEndpointAlarmConfProfileEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.16.1
Each entry corresponds to a single alarm configuration profile. Each profile contains a set of parameters for setting alarm thresholds for various performance attributes monitored at HDSL2/SHDSL segment endpoints. Profiles may be created/deleted using the row creation/deletion mechanism via hdsl2ShdslEndpointAlarmConfProfileRowStatus. If an active entry is referenced in either hdsl2ShdslSpanConfAlarmProfile or hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain active until all references are removed.
Status: current Access: not-accessible
OBJECT-TYPE    
  Shehdsl2ShdslEndpointAlarmConfProfileEntry  

shehdsl2ShdslEndpointAlarmConfProfileIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.16.1.1
A free running index for this table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

shehdsl2ShdslEndpointAlarmConfProfileName 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.16.1.2
This object is the unique index associated with this profile. This characters are not allowed: space : ?
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

shehdsl2ShdslEndpointThreshLoopAttenuation 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.16.1.3
This object configures the loop attenuation alarm threshold. When the current value of hdsl2ShdslEndpointCurrAtn reaches or exceeds this threshold, a hdsl2ShdslLoopAttenCrossing MAY be generated.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -127..128  

shehdsl2ShdslEndpointThreshSNRMargin 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.16.1.4
This object configures the SNR margin alarm threshold. When the current value of hdsl2ShdslEndpointCurrSnrMgn reaches or drops below this threshold, a hdsl2ShdslSNRMarginCrossing MAY be generated.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -127..128  

shehdsl2ShdslEndpointThreshES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.16.1.5
This object configures the threshold for the number of errored seconds (ES) within any given 15-minute performance data collection interval. If the value of errored seconds in a particular 15-minute collection interval reaches/ exceeds this value, a hdsl2ShdslPerfESThresh MAY be generated. At most one notification will be sent per interval per endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslPerfIntervalThreshold  

shehdsl2ShdslEndpointThreshSES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.16.1.6
This object configures the threshold for the number of severely errored seconds (SES) within any given 15-minute performance data collection interval. If the value of severely errored seconds in a particular 15-minute collection interval reaches/exceeds this value, a hdsl2ShdslPerfSESThresh MAY be generated. At most one notification will be sent per interval per endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslPerfIntervalThreshold  

shehdsl2ShdslEndpointThreshCRCanomalies 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.16.1.7
This object configures the threshold for the number of CRC anomalies within any given 15-minute performance data collection interval. If the value of CRC anomalies in a particular 15-minute collection interval reaches/exceeds this value, a hdsl2ShdslPerfCRCanomaliesThresh MAY be generated. At most one notification will be sent per interval per endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

shehdsl2ShdslEndpointThreshLOSWS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.16.1.8
This object configures the threshold for the number of Loss of Sync Word (LOSW) Seconds within any given 15-minute performance data collection interval. If the value of LOSW in a particular 15-minute collection interval reaches/exceeds this value, a hdsl2ShdslPerfLOSWSThresh MAY be generated. At most one notification will be sent per interval per endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslPerfIntervalThreshold  

shehdsl2ShdslEndpointThreshUAS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.16.1.9
This object configures the threshold for the number of unavailable seconds (UAS) within any given 15-minute performance data collection interval. If the value of UAS in a particular 15-minute collection interval reaches/exceeds this value, a hdsl2ShdslPerfUASThresh MAY be generated. At most one notification will be sent per interval per endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  SheHdsl2ShdslPerfIntervalThreshold  

shehdsl2ShdslEndpointAlarmConfProfileControl 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17
OBJECT IDENTIFIER    

shehdsl2ShdslEndpointAlarmConfProfileControlRequest 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.1
createshehdsl2ShdslEndpointAlarmConfProfile modifyshehdsl2ShdslEndpointAlarmConfProfile deleteshehdsl2ShdslEndpointAlarmConfProfile
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslControlRequestType  

shehdsl2ShdslEndpointAlarmConfProfileControlIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.2
Key for the modified or deleted entry. NE will choose this number during create.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..64  

shehdsl2ShdslEndpointAlarmConfProfileControlStatus 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

shehdsl2ShdslEndpointAlarmConfProfileControlTimer 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

shehdsl2ShdslEndpointAlarmConfProfileControlReqResult 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslControlRequestResultType  

shehdsl2ShdslEndpointAlarmConfProfileControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

shehdsl2ShdslEndpointAlarmConfProfileControlProfileName 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.7
Name for new profile.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

shehdsl2ShdslEndpointConfProfileControlThreshLoopAttenuation 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.8
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -127..128  

shehdsl2ShdslEndpointConfProfileControlThreshSNRMargin 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.9
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -127..128  

shehdsl2ShdslEndpointConfProfileControlThreshES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.10
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslPerfIntervalThreshold  

shehdsl2ShdslEndpointConfProfileControlThreshSES 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.11
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslPerfIntervalThreshold  

shehdsl2ShdslEndpointConfProfileControlThreshCRCanomalies 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.12
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

shehdsl2ShdslEndpointConfProfileControlThreshLOSWS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.13
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslPerfIntervalThreshold  

shehdsl2ShdslEndpointConfProfileControlThreshUAS 1.3.6.1.4.1.231.7.1.2.1.12.1.2.7.17.14
Look at table.
Status: current Access: read-write
OBJECT-TYPE    
  SheHdsl2ShdslPerfIntervalThreshold  

shehdsl2ShdslNotifications 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8
OBJECT IDENTIFIER    

shehdsl2ShdslLoopAttenCrossing 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.1
This notification indicates that the loop attenuation threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslSNRMarginCrossing 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.2
This notification indicates that the SNR margin threshold (as per the hdsl2ShdslEndpointThreshSNRMargin value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslPerfESThresh 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.3
This notification indicates that the errored seconds threshold (as per the hdsl2ShdslEndpointThreshES value) has been reached/ exceeded for the HDSL2/SHDSL segment endpoint.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslPerfSESThresh 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.4
This notification indicates that the severely errored seconds threshold (as per the hdsl2ShdslEndpointThreshSES value) has been reached/exceeded for the HDSL2/SHDSL Segment Endpoint.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslPerfCRCanomaliesThresh 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.5
This notification indicates that the CRC anomalies threshold (as per the hdsl2ShdslEndpointThreshCRCanomalies value) has been reached/exceeded for the HDSL2/SHDSL Segment Endpoint.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslPerfLOSWSThresh 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.6
This notification indicates that the LOSW seconds threshold (as per the hdsl2ShdslEndpointThreshLOSWS value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslPerfUASThresh 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.7
This notification indicates that the unavailable seconds threshold (as per the hdsl2ShdslEndpointThreshUAS value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslSpanInvalidNumRepeaters 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.8
This notification indicates that a mismatch has been detected between the number of repeater/regenerator units configured for a HDSL2/SHDSL line via the hdsl2ShdslSpanConfNumRepeaters object and the actual number of repeater/regenerator units discovered via the EOC.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslLoopbackFailure 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.9
This notification indicates that an endpoint maintenance loopback command failed for an HDSL2/SHDSL segment.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslpowerBackoff 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.10
This notification indicates that the bit setting for powerBackoff in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdsldeviceFault 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.11
This notification indicates that the bit setting for deviceFault in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdsldcContinuityFault 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.12
This notification indicates that the bit setting for dcContinuityFault in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslconfigInitFailure 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.13
This notification indicates that the bit setting for configInitFailure in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslprotocolInitFailure 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.14
This notification indicates that the bit setting for protocolInitFailure in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslnoNeighborPresent 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.15
This notification indicates that the bit setting for noNeighborPresent in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslLocalPowerLoss 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.16
This notification indicates impending unit failure due to loss of local power (last gasp).
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslAtucPerfLol 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.17
This alarm informs the link between the line card and modem is disconnected for unidentied reason, not dying gasp.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslAtucPerfLpr 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.18
This alarm informs the link between the line card and modem is disconnected for dying gasp.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslAtucPerfLos 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.19
This alarm informs the link between the line card and modem is disconnected for loss of signal.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslAtucPerfLof 1.3.6.1.4.1.231.7.1.2.1.12.1.2.8.20
This alarm informs the link between the line card and modem is disconnected for loss of frame.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheShdslConfigurationNotifications 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9
OBJECT IDENTIFIER    

sheShdslLineParamsEntryModified 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.1
Notification for a complete LineParamsEntry-Modify-Command.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslSpanConfEntryModified 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.2
Notification for a complete SpanConfEntry-Modify-Command.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslSpanConfEntryAlarmProfileModified 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.3
Notification for a complete SpanConfEntry-Modify-Command.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslEndpointConfEntryModified 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.4
Notification for a complete EndPointConfEntry-Modify-Command.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslEndpointMaintEntryModified 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.5
Notification for a complete EndPointMaintEntry-Modify-Command.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslUnitMaintEntryModified 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.6
Notification for a complete UnitMaintEntry-Modify-Command.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslSpanConfProfileCreated 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.7
Notification for a complete SpanConfProfileEntry-Create-Command.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslSpanConfProfileModified 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.8
Notification for a complete SpanConfProfileEntry-Modify-Command.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslSpanConfProfileDeleted 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.9
Notification for a complete SpanConfProfileEntry-Delete-Command.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslEndpointAlarmConfProfileCreated 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.10
Notification for a complete EndPointAlarmProfileEntry-Create-Command.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslEndpointAlarmConfProfileModified 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.11
Notification for a complete EndPointAlarmProfileEntry-Modify-Command.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslEndpointAlarmConfProfileDeleted 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.12
Notification for a complete EndPointAlarmProfileEntry-Delete-Command.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslSpanConfProfileReqResult 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.13
Trap for long running profile modification result.
Status: current Access: read-write
NOTIFICATION-TYPE    

shehdsl2ShdslEndpointAlarmConfProfileReqResult 1.3.6.1.4.1.231.7.1.2.1.12.1.2.9.14
Trap for long running profile modification result.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheShdslVccTpTable 1.3.6.1.4.1.231.7.1.2.1.12.1.2.10
The VccTp-Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheShdslVccTpEntry

sheShdslVccTpEntry 1.3.6.1.4.1.231.7.1.2.1.12.1.2.10.1
This table contains the VccTp-Configurations. There will be one entry for every shdsl-interface available per default. This default entry should never be deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheShdslVccTpEntry  

sheShdslVccTpIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.10.1.1
Index for that table. The index will follow this rule: VccTpIndex = (VccTpSubLayerIndex << 4) + VccTpNumber
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65565  

sheShdslVccTpSubLayerIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.10.1.2
ifIndex of the underlaying shdsl-interface.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

sheShdslVccTpNumber 1.3.6.1.4.1.231.7.1.2.1.12.1.2.10.1.3
This is the logical number of VccTP on the corresponding interface. Maximum value is 1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

sheShdslVccTpVpi 1.3.6.1.4.1.231.7.1.2.1.12.1.2.10.1.4
The VPI - Value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

sheShdslVccTpVci 1.3.6.1.4.1.231.7.1.2.1.12.1.2.10.1.5
The Vci - Value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 32..65535  

sheShdslVccTpOamLevel 1.3.6.1.4.1.231.7.1.2.1.12.1.2.10.1.6
The OAM level for loop test on VP/VC level. Valid: f5 (for VC).
Status: current Access: read-only
OBJECT-TYPE    
  SheAtmOamLevelType 4..5  

sheShdslVccTpLoopTest 1.3.6.1.4.1.231.7.1.2.1.12.1.2.10.1.7
The type of loop test . For EndToEnd loop test loop location ID is FF..FF.
Status: current Access: read-only
OBJECT-TYPE    
  SheAtmOamLoopTestType  

sheShdslVccTpLoopTestResult 1.3.6.1.4.1.231.7.1.2.1.12.1.2.10.1.8
Possible values: segSuccess(0), segFailure(1), endToEndSuccess(2), endToEndFailure(3), aborted(4), progress(5), notAvailable(65535)
Status: current Access: read-only
OBJECT-TYPE    
  SheAtmOamLoopTestResultType  

sheShdslVccTpLoopLocId 1.3.6.1.4.1.231.7.1.2.1.12.1.2.10.1.9
Test cell loopback location. It is an identifier known by the crafts person identifying a ATM node in the ATM network. For EndToEnd loop test the default value is valid.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

sheShdslVccTpAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.10.1.10
Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per VccTp.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheShdslVccTpControl 1.3.6.1.4.1.231.7.1.2.1.12.1.2.11
OBJECT IDENTIFIER    

sheShdslVccTpControlRequest 1.3.6.1.4.1.231.7.1.2.1.12.1.2.11.1
modifyShdslVccTp: sheShdslVccTpControlIndex sheShdslVccTpControlVpi sheShdslVccTpControlVci sheShdslVccTpControlAlarmSeverityIndex modifyShdslVccTpLoopTest: sheShdslVccTpControlIndex sheShdslVccTpControlLoopTest createShdslVccTp: sheShdslVccTpControlSubLayerIndex sheShdslVccTpControlVpi sheShdslVccTpControlVci deleteShdslVccTp: sheShdslVccTpControlIndex
Status: current Access: read-write
OBJECT-TYPE    
  SheShdslControlRequestType  

sheShdslVccTpControlIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.11.2
Index of the Table-entry to be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheShdslVccTpControlStatus 1.3.6.1.4.1.231.7.1.2.1.12.1.2.11.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheShdslVccTpControlTimer 1.3.6.1.4.1.231.7.1.2.1.12.1.2.11.4
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheShdslVccTpControlReqResult 1.3.6.1.4.1.231.7.1.2.1.12.1.2.11.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheShdslControlRequestResultType  

sheShdslVccTpControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.12.1.2.11.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheShdslVccTpControlSubLayerIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.11.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

sheShdslVccTpControlVpi 1.3.6.1.4.1.231.7.1.2.1.12.1.2.11.9
Vpi
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

sheShdslVccTpControlVci 1.3.6.1.4.1.231.7.1.2.1.12.1.2.11.10
Vci
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 32..65535  

sheShdslVccTpControlLoopTest 1.3.6.1.4.1.231.7.1.2.1.12.1.2.11.11
Actual LoopTest-Value. Only None or endToEnd will be accepted.
Status: current Access: read-write
OBJECT-TYPE    
  SheAtmOamLoopTestType  

sheShdslVccTpControlAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.12.1.2.11.12
Index of the used AlarmSeverityProfile.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheShdslVccTpNotifications 1.3.6.1.4.1.231.7.1.2.1.12.1.2.12
OBJECT IDENTIFIER    

sheShdslVccTpModified 1.3.6.1.4.1.231.7.1.2.1.12.1.2.12.2
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheShdslVccRDIAlarm 1.3.6.1.4.1.231.7.1.2.1.12.1.2.12.4
RDI detected.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheShdslVccAISAlarm 1.3.6.1.4.1.231.7.1.2.1.12.1.2.12.5
AIS detected.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheShdslVccTpConfigurationFailed 1.3.6.1.4.1.231.7.1.2.1.12.1.2.12.6
Notification in case of failed VccTp-Configuration.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheShdslVccTpCreated 1.3.6.1.4.1.231.7.1.2.1.12.1.2.12.7
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheShdslVccTpDeleted 1.3.6.1.4.1.231.7.1.2.1.12.1.2.12.8
Configuration notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheShdslConformance 1.3.6.1.4.1.231.7.1.2.1.12.1.2.100
OBJECT IDENTIFIER    

sheShdslCompliances 1.3.6.1.4.1.231.7.1.2.1.12.1.2.100.1
OBJECT IDENTIFIER    

sheShdslCompliance 1.3.6.1.4.1.231.7.1.2.1.12.1.2.100.1.1
Description.
Status: current Access: read-write
MODULE-COMPLIANCE    

sheShdslGroups 1.3.6.1.4.1.231.7.1.2.1.12.1.2.100.2
OBJECT IDENTIFIER    

sheShdslGroup 1.3.6.1.4.1.231.7.1.2.1.12.1.2.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheShdslControlGroup 1.3.6.1.4.1.231.7.1.2.1.12.1.2.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheShdslNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.12.1.2.100.2.3
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheShdslObsoleteGroup 1.3.6.1.4.1.231.7.1.2.1.12.1.2.100.2.4
Description.
Status: obsolete Access: read-write
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor